1/******************************************************************************* 2 * 3 * Module Name: rscalc - Calculate stream and list lengths 4 * 5 ******************************************************************************/ 6 7/* 8 * Copyright (C) 2000 - 2014, Intel Corp. 9 * All rights reserved. 10 * 11 * Redistribution and use in source and binary forms, with or without 12 * modification, are permitted provided that the following conditions 13 * are met: 14 * 1. Redistributions of source code must retain the above copyright 15 * notice, this list of conditions, and the following disclaimer, 16 * without modification. 17 * 2. Redistributions in binary form must reproduce at minimum a disclaimer 18 * substantially similar to the "NO WARRANTY" disclaimer below 19 * ("Disclaimer") and any redistribution must be conditioned upon 20 * including a substantially similar Disclaimer requirement for further 21 * binary redistribution. 22 * 3. Neither the names of the above-listed copyright holders nor the names 23 * of any contributors may be used to endorse or promote products derived 24 * from this software without specific prior written permission. 25 * 26 * Alternatively, this software may be distributed under the terms of the 27 * GNU General Public License ("GPL") version 2 as published by the Free 28 * Software Foundation. 29 * 30 * NO WARRANTY 31 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 32 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 33 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR 34 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 35 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 36 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 37 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 38 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 39 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING 40 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 41 * POSSIBILITY OF SUCH DAMAGES. 42 */ 43 44#include <acpi/acpi.h> 45#include "accommon.h" 46#include "acresrc.h" 47#include "acnamesp.h" 48 49#define _COMPONENT ACPI_RESOURCES 50ACPI_MODULE_NAME("rscalc") 51 52/* Local prototypes */ 53static u8 acpi_rs_count_set_bits(u16 bit_field); 54 55static acpi_rs_length 56acpi_rs_struct_option_length(struct acpi_resource_source *resource_source); 57 58static u32 59acpi_rs_stream_option_length(u32 resource_length, u32 minimum_total_length); 60 61/******************************************************************************* 62 * 63 * FUNCTION: acpi_rs_count_set_bits 64 * 65 * PARAMETERS: bit_field - Field in which to count bits 66 * 67 * RETURN: Number of bits set within the field 68 * 69 * DESCRIPTION: Count the number of bits set in a resource field. Used for 70 * (Short descriptor) interrupt and DMA lists. 71 * 72 ******************************************************************************/ 73 74static u8 acpi_rs_count_set_bits(u16 bit_field) 75{ 76 u8 bits_set; 77 78 ACPI_FUNCTION_ENTRY(); 79 80 for (bits_set = 0; bit_field; bits_set++) { 81 82 /* Zero the least significant bit that is set */ 83 84 bit_field &= (u16) (bit_field - 1); 85 } 86 87 return (bits_set); 88} 89 90/******************************************************************************* 91 * 92 * FUNCTION: acpi_rs_struct_option_length 93 * 94 * PARAMETERS: resource_source - Pointer to optional descriptor field 95 * 96 * RETURN: Status 97 * 98 * DESCRIPTION: Common code to handle optional resource_source_index and 99 * resource_source fields in some Large descriptors. Used during 100 * list-to-stream conversion 101 * 102 ******************************************************************************/ 103 104static acpi_rs_length 105acpi_rs_struct_option_length(struct acpi_resource_source *resource_source) 106{ 107 ACPI_FUNCTION_ENTRY(); 108 109 /* 110 * If the resource_source string is valid, return the size of the string 111 * (string_length includes the NULL terminator) plus the size of the 112 * resource_source_index (1). 113 */ 114 if (resource_source->string_ptr) { 115 return ((acpi_rs_length) (resource_source->string_length + 1)); 116 } 117 118 return (0); 119} 120 121/******************************************************************************* 122 * 123 * FUNCTION: acpi_rs_stream_option_length 124 * 125 * PARAMETERS: resource_length - Length from the resource header 126 * minimum_total_length - Minimum length of this resource, before 127 * any optional fields. Includes header size 128 * 129 * RETURN: Length of optional string (0 if no string present) 130 * 131 * DESCRIPTION: Common code to handle optional resource_source_index and 132 * resource_source fields in some Large descriptors. Used during 133 * stream-to-list conversion 134 * 135 ******************************************************************************/ 136 137static u32 138acpi_rs_stream_option_length(u32 resource_length, 139 u32 minimum_aml_resource_length) 140{ 141 u32 string_length = 0; 142 143 ACPI_FUNCTION_ENTRY(); 144 145 /* 146 * The resource_source_index and resource_source are optional elements of some 147 * Large-type resource descriptors. 148 */ 149 150 /* 151 * If the length of the actual resource descriptor is greater than the ACPI 152 * spec-defined minimum length, it means that a resource_source_index exists 153 * and is followed by a (required) null terminated string. The string length 154 * (including the null terminator) is the resource length minus the minimum 155 * length, minus one byte for the resource_source_index itself. 156 */ 157 if (resource_length > minimum_aml_resource_length) { 158 159 /* Compute the length of the optional string */ 160 161 string_length = 162 resource_length - minimum_aml_resource_length - 1; 163 } 164 165 /* 166 * Round the length up to a multiple of the native word in order to 167 * guarantee that the entire resource descriptor is native word aligned 168 */ 169 return ((u32) ACPI_ROUND_UP_TO_NATIVE_WORD(string_length)); 170} 171 172/******************************************************************************* 173 * 174 * FUNCTION: acpi_rs_get_aml_length 175 * 176 * PARAMETERS: resource - Pointer to the resource linked list 177 * resource_list_size - Size of the resource linked list 178 * size_needed - Where the required size is returned 179 * 180 * RETURN: Status 181 * 182 * DESCRIPTION: Takes a linked list of internal resource descriptors and 183 * calculates the size buffer needed to hold the corresponding 184 * external resource byte stream. 185 * 186 ******************************************************************************/ 187 188acpi_status 189acpi_rs_get_aml_length(struct acpi_resource *resource, 190 acpi_size resource_list_size, acpi_size * size_needed) 191{ 192 acpi_size aml_size_needed = 0; 193 struct acpi_resource *resource_end; 194 acpi_rs_length total_size; 195 196 ACPI_FUNCTION_TRACE(rs_get_aml_length); 197 198 /* Traverse entire list of internal resource descriptors */ 199 200 resource_end = 201 ACPI_ADD_PTR(struct acpi_resource, resource, resource_list_size); 202 while (resource < resource_end) { 203 204 /* Validate the descriptor type */ 205 206 if (resource->type > ACPI_RESOURCE_TYPE_MAX) { 207 return_ACPI_STATUS(AE_AML_INVALID_RESOURCE_TYPE); 208 } 209 210 /* Sanity check the length. It must not be zero, or we loop forever */ 211 212 if (!resource->length) { 213 return_ACPI_STATUS(AE_AML_BAD_RESOURCE_LENGTH); 214 } 215 216 /* Get the base size of the (external stream) resource descriptor */ 217 218 total_size = acpi_gbl_aml_resource_sizes[resource->type]; 219 220 /* 221 * Augment the base size for descriptors with optional and/or 222 * variable-length fields 223 */ 224 switch (resource->type) { 225 case ACPI_RESOURCE_TYPE_IRQ: 226 227 /* Length can be 3 or 2 */ 228 229 if (resource->data.irq.descriptor_length == 2) { 230 total_size--; 231 } 232 break; 233 234 case ACPI_RESOURCE_TYPE_START_DEPENDENT: 235 236 /* Length can be 1 or 0 */ 237 238 if (resource->data.irq.descriptor_length == 0) { 239 total_size--; 240 } 241 break; 242 243 case ACPI_RESOURCE_TYPE_VENDOR: 244 /* 245 * Vendor Defined Resource: 246 * For a Vendor Specific resource, if the Length is between 1 and 7 247 * it will be created as a Small Resource data type, otherwise it 248 * is a Large Resource data type. 249 */ 250 if (resource->data.vendor.byte_length > 7) { 251 252 /* Base size of a Large resource descriptor */ 253 254 total_size = 255 sizeof(struct aml_resource_large_header); 256 } 257 258 /* Add the size of the vendor-specific data */ 259 260 total_size = (acpi_rs_length) 261 (total_size + resource->data.vendor.byte_length); 262 break; 263 264 case ACPI_RESOURCE_TYPE_END_TAG: 265 /* 266 * End Tag: 267 * We are done -- return the accumulated total size. 268 */ 269 *size_needed = aml_size_needed + total_size; 270 271 /* Normal exit */ 272 273 return_ACPI_STATUS(AE_OK); 274 275 case ACPI_RESOURCE_TYPE_ADDRESS16: 276 /* 277 * 16-Bit Address Resource: 278 * Add the size of the optional resource_source info 279 */ 280 total_size = (acpi_rs_length) 281 (total_size + 282 acpi_rs_struct_option_length(&resource->data. 283 address16. 284 resource_source)); 285 break; 286 287 case ACPI_RESOURCE_TYPE_ADDRESS32: 288 /* 289 * 32-Bit Address Resource: 290 * Add the size of the optional resource_source info 291 */ 292 total_size = (acpi_rs_length) 293 (total_size + 294 acpi_rs_struct_option_length(&resource->data. 295 address32. 296 resource_source)); 297 break; 298 299 case ACPI_RESOURCE_TYPE_ADDRESS64: 300 /* 301 * 64-Bit Address Resource: 302 * Add the size of the optional resource_source info 303 */ 304 total_size = (acpi_rs_length) 305 (total_size + 306 acpi_rs_struct_option_length(&resource->data. 307 address64. 308 resource_source)); 309 break; 310 311 case ACPI_RESOURCE_TYPE_EXTENDED_IRQ: 312 /* 313 * Extended IRQ Resource: 314 * Add the size of each additional optional interrupt beyond the 315 * required 1 (4 bytes for each u32 interrupt number) 316 */ 317 total_size = (acpi_rs_length) 318 (total_size + 319 ((resource->data.extended_irq.interrupt_count - 320 1) * 4) + 321 /* Add the size of the optional resource_source info */ 322 acpi_rs_struct_option_length(&resource->data. 323 extended_irq. 324 resource_source)); 325 break; 326 327 case ACPI_RESOURCE_TYPE_GPIO: 328 329 total_size = 330 (acpi_rs_length) (total_size + 331 (resource->data.gpio. 332 pin_table_length * 2) + 333 resource->data.gpio. 334 resource_source.string_length + 335 resource->data.gpio. 336 vendor_length); 337 338 break; 339 340 case ACPI_RESOURCE_TYPE_SERIAL_BUS: 341 342 total_size = 343 acpi_gbl_aml_resource_serial_bus_sizes[resource-> 344 data. 345 common_serial_bus. 346 type]; 347 348 total_size = (acpi_rs_length) (total_size + 349 resource->data. 350 i2c_serial_bus. 351 resource_source. 352 string_length + 353 resource->data. 354 i2c_serial_bus. 355 vendor_length); 356 357 break; 358 359 default: 360 361 break; 362 } 363 364 /* Update the total */ 365 366 aml_size_needed += total_size; 367 368 /* Point to the next object */ 369 370 resource = 371 ACPI_ADD_PTR(struct acpi_resource, resource, 372 resource->length); 373 } 374 375 /* Did not find an end_tag resource descriptor */ 376 377 return_ACPI_STATUS(AE_AML_NO_RESOURCE_END_TAG); 378} 379 380/******************************************************************************* 381 * 382 * FUNCTION: acpi_rs_get_list_length 383 * 384 * PARAMETERS: aml_buffer - Pointer to the resource byte stream 385 * aml_buffer_length - Size of aml_buffer 386 * size_needed - Where the size needed is returned 387 * 388 * RETURN: Status 389 * 390 * DESCRIPTION: Takes an external resource byte stream and calculates the size 391 * buffer needed to hold the corresponding internal resource 392 * descriptor linked list. 393 * 394 ******************************************************************************/ 395 396acpi_status 397acpi_rs_get_list_length(u8 * aml_buffer, 398 u32 aml_buffer_length, acpi_size * size_needed) 399{ 400 acpi_status status; 401 u8 *end_aml; 402 u8 *buffer; 403 u32 buffer_size; 404 u16 temp16; 405 u16 resource_length; 406 u32 extra_struct_bytes; 407 u8 resource_index; 408 u8 minimum_aml_resource_length; 409 union aml_resource *aml_resource; 410 411 ACPI_FUNCTION_TRACE(rs_get_list_length); 412 413 *size_needed = ACPI_RS_SIZE_MIN; /* Minimum size is one end_tag */ 414 end_aml = aml_buffer + aml_buffer_length; 415 416 /* Walk the list of AML resource descriptors */ 417 418 while (aml_buffer < end_aml) { 419 420 /* Validate the Resource Type and Resource Length */ 421 422 status = 423 acpi_ut_validate_resource(NULL, aml_buffer, 424 &resource_index); 425 if (ACPI_FAILURE(status)) { 426 /* 427 * Exit on failure. Cannot continue because the descriptor length 428 * may be bogus also. 429 */ 430 return_ACPI_STATUS(status); 431 } 432 433 aml_resource = (void *)aml_buffer; 434 435 /* Get the resource length and base (minimum) AML size */ 436 437 resource_length = acpi_ut_get_resource_length(aml_buffer); 438 minimum_aml_resource_length = 439 acpi_gbl_resource_aml_sizes[resource_index]; 440 441 /* 442 * Augment the size for descriptors with optional 443 * and/or variable length fields 444 */ 445 extra_struct_bytes = 0; 446 buffer = 447 aml_buffer + acpi_ut_get_resource_header_length(aml_buffer); 448 449 switch (acpi_ut_get_resource_type(aml_buffer)) { 450 case ACPI_RESOURCE_NAME_IRQ: 451 /* 452 * IRQ Resource: 453 * Get the number of bits set in the 16-bit IRQ mask 454 */ 455 ACPI_MOVE_16_TO_16(&temp16, buffer); 456 extra_struct_bytes = acpi_rs_count_set_bits(temp16); 457 break; 458 459 case ACPI_RESOURCE_NAME_DMA: 460 /* 461 * DMA Resource: 462 * Get the number of bits set in the 8-bit DMA mask 463 */ 464 extra_struct_bytes = acpi_rs_count_set_bits(*buffer); 465 break; 466 467 case ACPI_RESOURCE_NAME_VENDOR_SMALL: 468 case ACPI_RESOURCE_NAME_VENDOR_LARGE: 469 /* 470 * Vendor Resource: 471 * Get the number of vendor data bytes 472 */ 473 extra_struct_bytes = resource_length; 474 475 /* 476 * There is already one byte included in the minimum 477 * descriptor size. If there are extra struct bytes, 478 * subtract one from the count. 479 */ 480 if (extra_struct_bytes) { 481 extra_struct_bytes--; 482 } 483 break; 484 485 case ACPI_RESOURCE_NAME_END_TAG: 486 /* 487 * End Tag: This is the normal exit 488 */ 489 return_ACPI_STATUS(AE_OK); 490 491 case ACPI_RESOURCE_NAME_ADDRESS32: 492 case ACPI_RESOURCE_NAME_ADDRESS16: 493 case ACPI_RESOURCE_NAME_ADDRESS64: 494 /* 495 * Address Resource: 496 * Add the size of the optional resource_source 497 */ 498 extra_struct_bytes = 499 acpi_rs_stream_option_length(resource_length, 500 minimum_aml_resource_length); 501 break; 502 503 case ACPI_RESOURCE_NAME_EXTENDED_IRQ: 504 /* 505 * Extended IRQ Resource: 506 * Using the interrupt_table_length, add 4 bytes for each additional 507 * interrupt. Note: at least one interrupt is required and is 508 * included in the minimum descriptor size (reason for the -1) 509 */ 510 extra_struct_bytes = (buffer[1] - 1) * sizeof(u32); 511 512 /* Add the size of the optional resource_source */ 513 514 extra_struct_bytes += 515 acpi_rs_stream_option_length(resource_length - 516 extra_struct_bytes, 517 minimum_aml_resource_length); 518 break; 519 520 case ACPI_RESOURCE_NAME_GPIO: 521 522 /* Vendor data is optional */ 523 524 if (aml_resource->gpio.vendor_length) { 525 extra_struct_bytes += 526 aml_resource->gpio.vendor_offset - 527 aml_resource->gpio.pin_table_offset + 528 aml_resource->gpio.vendor_length; 529 } else { 530 extra_struct_bytes += 531 aml_resource->large_header.resource_length + 532 sizeof(struct aml_resource_large_header) - 533 aml_resource->gpio.pin_table_offset; 534 } 535 break; 536 537 case ACPI_RESOURCE_NAME_SERIAL_BUS: 538 539 minimum_aml_resource_length = 540 acpi_gbl_resource_aml_serial_bus_sizes 541 [aml_resource->common_serial_bus.type]; 542 extra_struct_bytes += 543 aml_resource->common_serial_bus.resource_length - 544 minimum_aml_resource_length; 545 break; 546 547 default: 548 549 break; 550 } 551 552 /* 553 * Update the required buffer size for the internal descriptor structs 554 * 555 * Important: Round the size up for the appropriate alignment. This 556 * is a requirement on IA64. 557 */ 558 if (acpi_ut_get_resource_type(aml_buffer) == 559 ACPI_RESOURCE_NAME_SERIAL_BUS) { 560 buffer_size = 561 acpi_gbl_resource_struct_serial_bus_sizes 562 [aml_resource->common_serial_bus.type] + 563 extra_struct_bytes; 564 } else { 565 buffer_size = 566 acpi_gbl_resource_struct_sizes[resource_index] + 567 extra_struct_bytes; 568 } 569 buffer_size = (u32)ACPI_ROUND_UP_TO_NATIVE_WORD(buffer_size); 570 571 *size_needed += buffer_size; 572 573 ACPI_DEBUG_PRINT((ACPI_DB_RESOURCES, 574 "Type %.2X, AmlLength %.2X InternalLength %.2X\n", 575 acpi_ut_get_resource_type(aml_buffer), 576 acpi_ut_get_descriptor_length(aml_buffer), 577 buffer_size)); 578 579 /* 580 * Point to the next resource within the AML stream using the length 581 * contained in the resource descriptor header 582 */ 583 aml_buffer += acpi_ut_get_descriptor_length(aml_buffer); 584 } 585 586 /* Did not find an end_tag resource descriptor */ 587 588 return_ACPI_STATUS(AE_AML_NO_RESOURCE_END_TAG); 589} 590 591/******************************************************************************* 592 * 593 * FUNCTION: acpi_rs_get_pci_routing_table_length 594 * 595 * PARAMETERS: package_object - Pointer to the package object 596 * buffer_size_needed - u32 pointer of the size buffer 597 * needed to properly return the 598 * parsed data 599 * 600 * RETURN: Status 601 * 602 * DESCRIPTION: Given a package representing a PCI routing table, this 603 * calculates the size of the corresponding linked list of 604 * descriptions. 605 * 606 ******************************************************************************/ 607 608acpi_status 609acpi_rs_get_pci_routing_table_length(union acpi_operand_object *package_object, 610 acpi_size * buffer_size_needed) 611{ 612 u32 number_of_elements; 613 acpi_size temp_size_needed = 0; 614 union acpi_operand_object **top_object_list; 615 u32 index; 616 union acpi_operand_object *package_element; 617 union acpi_operand_object **sub_object_list; 618 u8 name_found; 619 u32 table_index; 620 621 ACPI_FUNCTION_TRACE(rs_get_pci_routing_table_length); 622 623 number_of_elements = package_object->package.count; 624 625 /* 626 * Calculate the size of the return buffer. 627 * The base size is the number of elements * the sizes of the 628 * structures. Additional space for the strings is added below. 629 * The minus one is to subtract the size of the u8 Source[1] 630 * member because it is added below. 631 * 632 * But each PRT_ENTRY structure has a pointer to a string and 633 * the size of that string must be found. 634 */ 635 top_object_list = package_object->package.elements; 636 637 for (index = 0; index < number_of_elements; index++) { 638 639 /* Dereference the subpackage */ 640 641 package_element = *top_object_list; 642 643 /* We must have a valid Package object */ 644 645 if (!package_element || 646 (package_element->common.type != ACPI_TYPE_PACKAGE)) { 647 return_ACPI_STATUS(AE_AML_OPERAND_TYPE); 648 } 649 650 /* 651 * The sub_object_list will now point to an array of the 652 * four IRQ elements: Address, Pin, Source and source_index 653 */ 654 sub_object_list = package_element->package.elements; 655 656 /* Scan the irq_table_elements for the Source Name String */ 657 658 name_found = FALSE; 659 660 for (table_index = 0; 661 table_index < package_element->package.count 662 && !name_found; table_index++) { 663 if (*sub_object_list && /* Null object allowed */ 664 ((ACPI_TYPE_STRING == 665 (*sub_object_list)->common.type) || 666 ((ACPI_TYPE_LOCAL_REFERENCE == 667 (*sub_object_list)->common.type) && 668 ((*sub_object_list)->reference.class == 669 ACPI_REFCLASS_NAME)))) { 670 name_found = TRUE; 671 } else { 672 /* Look at the next element */ 673 674 sub_object_list++; 675 } 676 } 677 678 temp_size_needed += (sizeof(struct acpi_pci_routing_table) - 4); 679 680 /* Was a String type found? */ 681 682 if (name_found) { 683 if ((*sub_object_list)->common.type == ACPI_TYPE_STRING) { 684 /* 685 * The length String.Length field does not include the 686 * terminating NULL, add 1 687 */ 688 temp_size_needed += ((acpi_size) 689 (*sub_object_list)->string. 690 length + 1); 691 } else { 692 temp_size_needed += acpi_ns_get_pathname_length((*sub_object_list)->reference.node); 693 } 694 } else { 695 /* 696 * If no name was found, then this is a NULL, which is 697 * translated as a u32 zero. 698 */ 699 temp_size_needed += sizeof(u32); 700 } 701 702 /* Round up the size since each element must be aligned */ 703 704 temp_size_needed = ACPI_ROUND_UP_TO_64BIT(temp_size_needed); 705 706 /* Point to the next union acpi_operand_object */ 707 708 top_object_list++; 709 } 710 711 /* 712 * Add an extra element to the end of the list, essentially a 713 * NULL terminator 714 */ 715 *buffer_size_needed = 716 temp_size_needed + sizeof(struct acpi_pci_routing_table); 717 return_ACPI_STATUS(AE_OK); 718} 719