1/* 2 * ahci.h - Common AHCI SATA definitions and declarations 3 * 4 * Maintained by: Tejun Heo <tj@kernel.org> 5 * Please ALWAYS copy linux-ide@vger.kernel.org 6 * on emails. 7 * 8 * Copyright 2004-2005 Red Hat, Inc. 9 * 10 * 11 * This program is free software; you can redistribute it and/or modify 12 * it under the terms of the GNU General Public License as published by 13 * the Free Software Foundation; either version 2, or (at your option) 14 * any later version. 15 * 16 * This program is distributed in the hope that it will be useful, 17 * but WITHOUT ANY WARRANTY; without even the implied warranty of 18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 19 * GNU General Public License for more details. 20 * 21 * You should have received a copy of the GNU General Public License 22 * along with this program; see the file COPYING. If not, write to 23 * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. 24 * 25 * 26 * libata documentation is available via 'make {ps|pdf}docs', 27 * as Documentation/DocBook/libata.* 28 * 29 * AHCI hardware documentation: 30 * http://www.intel.com/technology/serialata/pdf/rev1_0.pdf 31 * http://www.intel.com/technology/serialata/pdf/rev1_1.pdf 32 * 33 */ 34 35#ifndef _AHCI_H 36#define _AHCI_H 37 38#include <linux/clk.h> 39#include <linux/libata.h> 40#include <linux/phy/phy.h> 41#include <linux/regulator/consumer.h> 42 43/* Enclosure Management Control */ 44#define EM_CTRL_MSG_TYPE 0x000f0000 45 46/* Enclosure Management LED Message Type */ 47#define EM_MSG_LED_HBA_PORT 0x0000000f 48#define EM_MSG_LED_PMP_SLOT 0x0000ff00 49#define EM_MSG_LED_VALUE 0xffff0000 50#define EM_MSG_LED_VALUE_ACTIVITY 0x00070000 51#define EM_MSG_LED_VALUE_OFF 0xfff80000 52#define EM_MSG_LED_VALUE_ON 0x00010000 53 54enum { 55 AHCI_MAX_PORTS = 32, 56 AHCI_MAX_CLKS = 5, 57 AHCI_MAX_SG = 168, /* hardware max is 64K */ 58 AHCI_DMA_BOUNDARY = 0xffffffff, 59 AHCI_MAX_CMDS = 32, 60 AHCI_CMD_SZ = 32, 61 AHCI_CMD_SLOT_SZ = AHCI_MAX_CMDS * AHCI_CMD_SZ, 62 AHCI_RX_FIS_SZ = 256, 63 AHCI_CMD_TBL_CDB = 0x40, 64 AHCI_CMD_TBL_HDR_SZ = 0x80, 65 AHCI_CMD_TBL_SZ = AHCI_CMD_TBL_HDR_SZ + (AHCI_MAX_SG * 16), 66 AHCI_CMD_TBL_AR_SZ = AHCI_CMD_TBL_SZ * AHCI_MAX_CMDS, 67 AHCI_PORT_PRIV_DMA_SZ = AHCI_CMD_SLOT_SZ + AHCI_CMD_TBL_AR_SZ + 68 AHCI_RX_FIS_SZ, 69 AHCI_PORT_PRIV_FBS_DMA_SZ = AHCI_CMD_SLOT_SZ + 70 AHCI_CMD_TBL_AR_SZ + 71 (AHCI_RX_FIS_SZ * 16), 72 AHCI_IRQ_ON_SG = (1 << 31), 73 AHCI_CMD_ATAPI = (1 << 5), 74 AHCI_CMD_WRITE = (1 << 6), 75 AHCI_CMD_PREFETCH = (1 << 7), 76 AHCI_CMD_RESET = (1 << 8), 77 AHCI_CMD_CLR_BUSY = (1 << 10), 78 79 RX_FIS_PIO_SETUP = 0x20, /* offset of PIO Setup FIS data */ 80 RX_FIS_D2H_REG = 0x40, /* offset of D2H Register FIS data */ 81 RX_FIS_SDB = 0x58, /* offset of SDB FIS data */ 82 RX_FIS_UNK = 0x60, /* offset of Unknown FIS data */ 83 84 /* global controller registers */ 85 HOST_CAP = 0x00, /* host capabilities */ 86 HOST_CTL = 0x04, /* global host control */ 87 HOST_IRQ_STAT = 0x08, /* interrupt status */ 88 HOST_PORTS_IMPL = 0x0c, /* bitmap of implemented ports */ 89 HOST_VERSION = 0x10, /* AHCI spec. version compliancy */ 90 HOST_EM_LOC = 0x1c, /* Enclosure Management location */ 91 HOST_EM_CTL = 0x20, /* Enclosure Management Control */ 92 HOST_CAP2 = 0x24, /* host capabilities, extended */ 93 94 /* HOST_CTL bits */ 95 HOST_RESET = (1 << 0), /* reset controller; self-clear */ 96 HOST_IRQ_EN = (1 << 1), /* global IRQ enable */ 97 HOST_MRSM = (1 << 2), /* MSI Revert to Single Message */ 98 HOST_AHCI_EN = (1 << 31), /* AHCI enabled */ 99 100 /* HOST_CAP bits */ 101 HOST_CAP_SXS = (1 << 5), /* Supports External SATA */ 102 HOST_CAP_EMS = (1 << 6), /* Enclosure Management support */ 103 HOST_CAP_CCC = (1 << 7), /* Command Completion Coalescing */ 104 HOST_CAP_PART = (1 << 13), /* Partial state capable */ 105 HOST_CAP_SSC = (1 << 14), /* Slumber state capable */ 106 HOST_CAP_PIO_MULTI = (1 << 15), /* PIO multiple DRQ support */ 107 HOST_CAP_FBS = (1 << 16), /* FIS-based switching support */ 108 HOST_CAP_PMP = (1 << 17), /* Port Multiplier support */ 109 HOST_CAP_ONLY = (1 << 18), /* Supports AHCI mode only */ 110 HOST_CAP_CLO = (1 << 24), /* Command List Override support */ 111 HOST_CAP_LED = (1 << 25), /* Supports activity LED */ 112 HOST_CAP_ALPM = (1 << 26), /* Aggressive Link PM support */ 113 HOST_CAP_SSS = (1 << 27), /* Staggered Spin-up */ 114 HOST_CAP_MPS = (1 << 28), /* Mechanical presence switch */ 115 HOST_CAP_SNTF = (1 << 29), /* SNotification register */ 116 HOST_CAP_NCQ = (1 << 30), /* Native Command Queueing */ 117 HOST_CAP_64 = (1 << 31), /* PCI DAC (64-bit DMA) support */ 118 119 /* HOST_CAP2 bits */ 120 HOST_CAP2_BOH = (1 << 0), /* BIOS/OS handoff supported */ 121 HOST_CAP2_NVMHCI = (1 << 1), /* NVMHCI supported */ 122 HOST_CAP2_APST = (1 << 2), /* Automatic partial to slumber */ 123 HOST_CAP2_SDS = (1 << 3), /* Support device sleep */ 124 HOST_CAP2_SADM = (1 << 4), /* Support aggressive DevSlp */ 125 HOST_CAP2_DESO = (1 << 5), /* DevSlp from slumber only */ 126 127 /* registers for each SATA port */ 128 PORT_LST_ADDR = 0x00, /* command list DMA addr */ 129 PORT_LST_ADDR_HI = 0x04, /* command list DMA addr hi */ 130 PORT_FIS_ADDR = 0x08, /* FIS rx buf addr */ 131 PORT_FIS_ADDR_HI = 0x0c, /* FIS rx buf addr hi */ 132 PORT_IRQ_STAT = 0x10, /* interrupt status */ 133 PORT_IRQ_MASK = 0x14, /* interrupt enable/disable mask */ 134 PORT_CMD = 0x18, /* port command */ 135 PORT_TFDATA = 0x20, /* taskfile data */ 136 PORT_SIG = 0x24, /* device TF signature */ 137 PORT_CMD_ISSUE = 0x38, /* command issue */ 138 PORT_SCR_STAT = 0x28, /* SATA phy register: SStatus */ 139 PORT_SCR_CTL = 0x2c, /* SATA phy register: SControl */ 140 PORT_SCR_ERR = 0x30, /* SATA phy register: SError */ 141 PORT_SCR_ACT = 0x34, /* SATA phy register: SActive */ 142 PORT_SCR_NTF = 0x3c, /* SATA phy register: SNotification */ 143 PORT_FBS = 0x40, /* FIS-based Switching */ 144 PORT_DEVSLP = 0x44, /* device sleep */ 145 146 /* PORT_IRQ_{STAT,MASK} bits */ 147 PORT_IRQ_COLD_PRES = (1 << 31), /* cold presence detect */ 148 PORT_IRQ_TF_ERR = (1 << 30), /* task file error */ 149 PORT_IRQ_HBUS_ERR = (1 << 29), /* host bus fatal error */ 150 PORT_IRQ_HBUS_DATA_ERR = (1 << 28), /* host bus data error */ 151 PORT_IRQ_IF_ERR = (1 << 27), /* interface fatal error */ 152 PORT_IRQ_IF_NONFATAL = (1 << 26), /* interface non-fatal error */ 153 PORT_IRQ_OVERFLOW = (1 << 24), /* xfer exhausted available S/G */ 154 PORT_IRQ_BAD_PMP = (1 << 23), /* incorrect port multiplier */ 155 156 PORT_IRQ_PHYRDY = (1 << 22), /* PhyRdy changed */ 157 PORT_IRQ_DEV_ILCK = (1 << 7), /* device interlock */ 158 PORT_IRQ_CONNECT = (1 << 6), /* port connect change status */ 159 PORT_IRQ_SG_DONE = (1 << 5), /* descriptor processed */ 160 PORT_IRQ_UNK_FIS = (1 << 4), /* unknown FIS rx'd */ 161 PORT_IRQ_SDB_FIS = (1 << 3), /* Set Device Bits FIS rx'd */ 162 PORT_IRQ_DMAS_FIS = (1 << 2), /* DMA Setup FIS rx'd */ 163 PORT_IRQ_PIOS_FIS = (1 << 1), /* PIO Setup FIS rx'd */ 164 PORT_IRQ_D2H_REG_FIS = (1 << 0), /* D2H Register FIS rx'd */ 165 166 PORT_IRQ_FREEZE = PORT_IRQ_HBUS_ERR | 167 PORT_IRQ_IF_ERR | 168 PORT_IRQ_CONNECT | 169 PORT_IRQ_PHYRDY | 170 PORT_IRQ_UNK_FIS | 171 PORT_IRQ_BAD_PMP, 172 PORT_IRQ_ERROR = PORT_IRQ_FREEZE | 173 PORT_IRQ_TF_ERR | 174 PORT_IRQ_HBUS_DATA_ERR, 175 DEF_PORT_IRQ = PORT_IRQ_ERROR | PORT_IRQ_SG_DONE | 176 PORT_IRQ_SDB_FIS | PORT_IRQ_DMAS_FIS | 177 PORT_IRQ_PIOS_FIS | PORT_IRQ_D2H_REG_FIS, 178 179 /* PORT_CMD bits */ 180 PORT_CMD_ASP = (1 << 27), /* Aggressive Slumber/Partial */ 181 PORT_CMD_ALPE = (1 << 26), /* Aggressive Link PM enable */ 182 PORT_CMD_ATAPI = (1 << 24), /* Device is ATAPI */ 183 PORT_CMD_FBSCP = (1 << 22), /* FBS Capable Port */ 184 PORT_CMD_PMP = (1 << 17), /* PMP attached */ 185 PORT_CMD_LIST_ON = (1 << 15), /* cmd list DMA engine running */ 186 PORT_CMD_FIS_ON = (1 << 14), /* FIS DMA engine running */ 187 PORT_CMD_FIS_RX = (1 << 4), /* Enable FIS receive DMA engine */ 188 PORT_CMD_CLO = (1 << 3), /* Command list override */ 189 PORT_CMD_POWER_ON = (1 << 2), /* Power up device */ 190 PORT_CMD_SPIN_UP = (1 << 1), /* Spin up device */ 191 PORT_CMD_START = (1 << 0), /* Enable port DMA engine */ 192 193 PORT_CMD_ICC_MASK = (0xf << 28), /* i/f ICC state mask */ 194 PORT_CMD_ICC_ACTIVE = (0x1 << 28), /* Put i/f in active state */ 195 PORT_CMD_ICC_PARTIAL = (0x2 << 28), /* Put i/f in partial state */ 196 PORT_CMD_ICC_SLUMBER = (0x6 << 28), /* Put i/f in slumber state */ 197 198 /* PORT_FBS bits */ 199 PORT_FBS_DWE_OFFSET = 16, /* FBS device with error offset */ 200 PORT_FBS_ADO_OFFSET = 12, /* FBS active dev optimization offset */ 201 PORT_FBS_DEV_OFFSET = 8, /* FBS device to issue offset */ 202 PORT_FBS_DEV_MASK = (0xf << PORT_FBS_DEV_OFFSET), /* FBS.DEV */ 203 PORT_FBS_SDE = (1 << 2), /* FBS single device error */ 204 PORT_FBS_DEC = (1 << 1), /* FBS device error clear */ 205 PORT_FBS_EN = (1 << 0), /* Enable FBS */ 206 207 /* PORT_DEVSLP bits */ 208 PORT_DEVSLP_DM_OFFSET = 25, /* DITO multiplier offset */ 209 PORT_DEVSLP_DM_MASK = (0xf << 25), /* DITO multiplier mask */ 210 PORT_DEVSLP_DITO_OFFSET = 15, /* DITO offset */ 211 PORT_DEVSLP_MDAT_OFFSET = 10, /* Minimum assertion time */ 212 PORT_DEVSLP_DETO_OFFSET = 2, /* DevSlp exit timeout */ 213 PORT_DEVSLP_DSP = (1 << 1), /* DevSlp present */ 214 PORT_DEVSLP_ADSE = (1 << 0), /* Aggressive DevSlp enable */ 215 216 /* hpriv->flags bits */ 217 218#define AHCI_HFLAGS(flags) .private_data = (void *)(flags) 219 220 AHCI_HFLAG_NO_NCQ = (1 << 0), 221 AHCI_HFLAG_IGN_IRQ_IF_ERR = (1 << 1), /* ignore IRQ_IF_ERR */ 222 AHCI_HFLAG_IGN_SERR_INTERNAL = (1 << 2), /* ignore SERR_INTERNAL */ 223 AHCI_HFLAG_32BIT_ONLY = (1 << 3), /* force 32bit */ 224 AHCI_HFLAG_MV_PATA = (1 << 4), /* PATA port */ 225 AHCI_HFLAG_NO_MSI = (1 << 5), /* no PCI MSI */ 226 AHCI_HFLAG_NO_PMP = (1 << 6), /* no PMP */ 227 AHCI_HFLAG_SECT255 = (1 << 8), /* max 255 sectors */ 228 AHCI_HFLAG_YES_NCQ = (1 << 9), /* force NCQ cap on */ 229 AHCI_HFLAG_NO_SUSPEND = (1 << 10), /* don't suspend */ 230 AHCI_HFLAG_SRST_TOUT_IS_OFFLINE = (1 << 11), /* treat SRST timeout as 231 link offline */ 232 AHCI_HFLAG_NO_SNTF = (1 << 12), /* no sntf */ 233 AHCI_HFLAG_NO_FPDMA_AA = (1 << 13), /* no FPDMA AA */ 234 AHCI_HFLAG_YES_FBS = (1 << 14), /* force FBS cap on */ 235 AHCI_HFLAG_DELAY_ENGINE = (1 << 15), /* do not start engine on 236 port start (wait until 237 error-handling stage) */ 238 AHCI_HFLAG_MULTI_MSI = (1 << 16), /* multiple PCI MSIs */ 239 AHCI_HFLAG_NO_DEVSLP = (1 << 17), /* no device sleep */ 240 AHCI_HFLAG_NO_FBS = (1 << 18), /* no FBS */ 241 242 /* ap->flags bits */ 243 244 AHCI_FLAG_COMMON = ATA_FLAG_SATA | ATA_FLAG_PIO_DMA | 245 ATA_FLAG_ACPI_SATA | ATA_FLAG_AN, 246 247 ICH_MAP = 0x90, /* ICH MAP register */ 248 249 /* em constants */ 250 EM_MAX_SLOTS = 8, 251 EM_MAX_RETRY = 5, 252 253 /* em_ctl bits */ 254 EM_CTL_RST = (1 << 9), /* Reset */ 255 EM_CTL_TM = (1 << 8), /* Transmit Message */ 256 EM_CTL_MR = (1 << 0), /* Message Received */ 257 EM_CTL_ALHD = (1 << 26), /* Activity LED */ 258 EM_CTL_XMT = (1 << 25), /* Transmit Only */ 259 EM_CTL_SMB = (1 << 24), /* Single Message Buffer */ 260 EM_CTL_SGPIO = (1 << 19), /* SGPIO messages supported */ 261 EM_CTL_SES = (1 << 18), /* SES-2 messages supported */ 262 EM_CTL_SAFTE = (1 << 17), /* SAF-TE messages supported */ 263 EM_CTL_LED = (1 << 16), /* LED messages supported */ 264 265 /* em message type */ 266 EM_MSG_TYPE_LED = (1 << 0), /* LED */ 267 EM_MSG_TYPE_SAFTE = (1 << 1), /* SAF-TE */ 268 EM_MSG_TYPE_SES2 = (1 << 2), /* SES-2 */ 269 EM_MSG_TYPE_SGPIO = (1 << 3), /* SGPIO */ 270}; 271 272struct ahci_cmd_hdr { 273 __le32 opts; 274 __le32 status; 275 __le32 tbl_addr; 276 __le32 tbl_addr_hi; 277 __le32 reserved[4]; 278}; 279 280struct ahci_sg { 281 __le32 addr; 282 __le32 addr_hi; 283 __le32 reserved; 284 __le32 flags_size; 285}; 286 287struct ahci_em_priv { 288 enum sw_activity blink_policy; 289 struct timer_list timer; 290 unsigned long saved_activity; 291 unsigned long activity; 292 unsigned long led_state; 293}; 294 295struct ahci_port_priv { 296 struct ata_link *active_link; 297 struct ahci_cmd_hdr *cmd_slot; 298 dma_addr_t cmd_slot_dma; 299 void *cmd_tbl; 300 dma_addr_t cmd_tbl_dma; 301 void *rx_fis; 302 dma_addr_t rx_fis_dma; 303 /* for NCQ spurious interrupt analysis */ 304 unsigned int ncq_saw_d2h:1; 305 unsigned int ncq_saw_dmas:1; 306 unsigned int ncq_saw_sdb:1; 307 atomic_t intr_status; /* interrupts to handle */ 308 spinlock_t lock; /* protects parent ata_port */ 309 u32 intr_mask; /* interrupts to enable */ 310 bool fbs_supported; /* set iff FBS is supported */ 311 bool fbs_enabled; /* set iff FBS is enabled */ 312 int fbs_last_dev; /* save FBS.DEV of last FIS */ 313 /* enclosure management info per PM slot */ 314 struct ahci_em_priv em_priv[EM_MAX_SLOTS]; 315 char *irq_desc; /* desc in /proc/interrupts */ 316}; 317 318struct ahci_host_priv { 319 /* Input fields */ 320 unsigned int flags; /* AHCI_HFLAG_* */ 321 u32 force_port_map; /* force port map */ 322 u32 mask_port_map; /* mask out particular bits */ 323 324 void __iomem * mmio; /* bus-independent mem map */ 325 u32 cap; /* cap to use */ 326 u32 cap2; /* cap2 to use */ 327 u32 port_map; /* port map to use */ 328 u32 saved_cap; /* saved initial cap */ 329 u32 saved_cap2; /* saved initial cap2 */ 330 u32 saved_port_map; /* saved initial port_map */ 331 u32 em_loc; /* enclosure management location */ 332 u32 em_buf_sz; /* EM buffer size in byte */ 333 u32 em_msg_type; /* EM message type */ 334 bool got_runtime_pm; /* Did we do pm_runtime_get? */ 335 struct clk *clks[AHCI_MAX_CLKS]; /* Optional */ 336 struct regulator *target_pwr; /* Optional */ 337 /* 338 * If platform uses PHYs. There is a 1:1 relation between the port number and 339 * the PHY position in this array. 340 */ 341 struct phy **phys; 342 unsigned nports; /* Number of ports */ 343 void *plat_data; /* Other platform data */ 344 /* 345 * Optional ahci_start_engine override, if not set this gets set to the 346 * default ahci_start_engine during ahci_save_initial_config, this can 347 * be overridden anytime before the host is activated. 348 */ 349 void (*start_engine)(struct ata_port *ap); 350}; 351 352extern int ahci_ignore_sss; 353 354extern struct device_attribute *ahci_shost_attrs[]; 355extern struct device_attribute *ahci_sdev_attrs[]; 356 357#define AHCI_SHT(drv_name) \ 358 ATA_NCQ_SHT(drv_name), \ 359 .can_queue = AHCI_MAX_CMDS - 1, \ 360 .sg_tablesize = AHCI_MAX_SG, \ 361 .dma_boundary = AHCI_DMA_BOUNDARY, \ 362 .shost_attrs = ahci_shost_attrs, \ 363 .sdev_attrs = ahci_sdev_attrs 364 365extern struct ata_port_operations ahci_ops; 366extern struct ata_port_operations ahci_platform_ops; 367extern struct ata_port_operations ahci_pmp_retry_srst_ops; 368 369unsigned int ahci_dev_classify(struct ata_port *ap); 370void ahci_fill_cmd_slot(struct ahci_port_priv *pp, unsigned int tag, 371 u32 opts); 372void ahci_save_initial_config(struct device *dev, 373 struct ahci_host_priv *hpriv); 374void ahci_init_controller(struct ata_host *host); 375int ahci_reset_controller(struct ata_host *host); 376 377int ahci_do_softreset(struct ata_link *link, unsigned int *class, 378 int pmp, unsigned long deadline, 379 int (*check_ready)(struct ata_link *link)); 380 381unsigned int ahci_qc_issue(struct ata_queued_cmd *qc); 382int ahci_stop_engine(struct ata_port *ap); 383void ahci_start_fis_rx(struct ata_port *ap); 384void ahci_start_engine(struct ata_port *ap); 385int ahci_check_ready(struct ata_link *link); 386int ahci_kick_engine(struct ata_port *ap); 387int ahci_port_resume(struct ata_port *ap); 388void ahci_set_em_messages(struct ahci_host_priv *hpriv, 389 struct ata_port_info *pi); 390int ahci_reset_em(struct ata_host *host); 391void ahci_print_info(struct ata_host *host, const char *scc_s); 392int ahci_host_activate(struct ata_host *host, int irq, 393 struct scsi_host_template *sht); 394void ahci_error_handler(struct ata_port *ap); 395 396static inline void __iomem *__ahci_port_base(struct ata_host *host, 397 unsigned int port_no) 398{ 399 struct ahci_host_priv *hpriv = host->private_data; 400 void __iomem *mmio = hpriv->mmio; 401 402 return mmio + 0x100 + (port_no * 0x80); 403} 404 405static inline void __iomem *ahci_port_base(struct ata_port *ap) 406{ 407 return __ahci_port_base(ap->host, ap->port_no); 408} 409 410static inline int ahci_nr_ports(u32 cap) 411{ 412 return (cap & 0x1f) + 1; 413} 414 415#endif /* _AHCI_H */ 416