1/* 2 * libata-scsi.c - helper library for ATA 3 * 4 * Maintained by: Tejun Heo <tj@kernel.org> 5 * Please ALWAYS copy linux-ide@vger.kernel.org 6 * on emails. 7 * 8 * Copyright 2003-2004 Red Hat, Inc. All rights reserved. 9 * Copyright 2003-2004 Jeff Garzik 10 * 11 * 12 * This program is free software; you can redistribute it and/or modify 13 * it under the terms of the GNU General Public License as published by 14 * the Free Software Foundation; either version 2, or (at your option) 15 * any later version. 16 * 17 * This program is distributed in the hope that it will be useful, 18 * but WITHOUT ANY WARRANTY; without even the implied warranty of 19 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 20 * GNU General Public License for more details. 21 * 22 * You should have received a copy of the GNU General Public License 23 * along with this program; see the file COPYING. If not, write to 24 * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. 25 * 26 * 27 * libata documentation is available via 'make {ps|pdf}docs', 28 * as Documentation/DocBook/libata.* 29 * 30 * Hardware documentation available from 31 * - http://www.t10.org/ 32 * - http://www.t13.org/ 33 * 34 */ 35 36#include <linux/slab.h> 37#include <linux/kernel.h> 38#include <linux/blkdev.h> 39#include <linux/spinlock.h> 40#include <linux/export.h> 41#include <scsi/scsi.h> 42#include <scsi/scsi_host.h> 43#include <scsi/scsi_cmnd.h> 44#include <scsi/scsi_eh.h> 45#include <scsi/scsi_device.h> 46#include <scsi/scsi_tcq.h> 47#include <scsi/scsi_transport.h> 48#include <linux/libata.h> 49#include <linux/hdreg.h> 50#include <linux/uaccess.h> 51#include <linux/suspend.h> 52#include <asm/unaligned.h> 53 54#include "libata.h" 55#include "libata-transport.h" 56 57#define ATA_SCSI_RBUF_SIZE 4096 58 59static DEFINE_SPINLOCK(ata_scsi_rbuf_lock); 60static u8 ata_scsi_rbuf[ATA_SCSI_RBUF_SIZE]; 61 62typedef unsigned int (*ata_xlat_func_t)(struct ata_queued_cmd *qc); 63 64static struct ata_device *__ata_scsi_find_dev(struct ata_port *ap, 65 const struct scsi_device *scsidev); 66static struct ata_device *ata_scsi_find_dev(struct ata_port *ap, 67 const struct scsi_device *scsidev); 68 69#define RW_RECOVERY_MPAGE 0x1 70#define RW_RECOVERY_MPAGE_LEN 12 71#define CACHE_MPAGE 0x8 72#define CACHE_MPAGE_LEN 20 73#define CONTROL_MPAGE 0xa 74#define CONTROL_MPAGE_LEN 12 75#define ALL_MPAGES 0x3f 76#define ALL_SUB_MPAGES 0xff 77 78 79static const u8 def_rw_recovery_mpage[RW_RECOVERY_MPAGE_LEN] = { 80 RW_RECOVERY_MPAGE, 81 RW_RECOVERY_MPAGE_LEN - 2, 82 (1 << 7), /* AWRE */ 83 0, /* read retry count */ 84 0, 0, 0, 0, 85 0, /* write retry count */ 86 0, 0, 0 87}; 88 89static const u8 def_cache_mpage[CACHE_MPAGE_LEN] = { 90 CACHE_MPAGE, 91 CACHE_MPAGE_LEN - 2, 92 0, /* contains WCE, needs to be 0 for logic */ 93 0, 0, 0, 0, 0, 0, 0, 0, 0, 94 0, /* contains DRA, needs to be 0 for logic */ 95 0, 0, 0, 0, 0, 0, 0 96}; 97 98static const u8 def_control_mpage[CONTROL_MPAGE_LEN] = { 99 CONTROL_MPAGE, 100 CONTROL_MPAGE_LEN - 2, 101 2, /* DSENSE=0, GLTSD=1 */ 102 0, /* [QAM+QERR may be 1, see 05-359r1] */ 103 0, 0, 0, 0, 0xff, 0xff, 104 0, 30 /* extended self test time, see 05-359r1 */ 105}; 106 107static const char *ata_lpm_policy_names[] = { 108 [ATA_LPM_UNKNOWN] = "max_performance", 109 [ATA_LPM_MAX_POWER] = "max_performance", 110 [ATA_LPM_MED_POWER] = "medium_power", 111 [ATA_LPM_MIN_POWER] = "min_power", 112}; 113 114static ssize_t ata_scsi_lpm_store(struct device *device, 115 struct device_attribute *attr, 116 const char *buf, size_t count) 117{ 118 struct Scsi_Host *shost = class_to_shost(device); 119 struct ata_port *ap = ata_shost_to_port(shost); 120 struct ata_link *link; 121 struct ata_device *dev; 122 enum ata_lpm_policy policy; 123 unsigned long flags; 124 125 /* UNKNOWN is internal state, iterate from MAX_POWER */ 126 for (policy = ATA_LPM_MAX_POWER; 127 policy < ARRAY_SIZE(ata_lpm_policy_names); policy++) { 128 const char *name = ata_lpm_policy_names[policy]; 129 130 if (strncmp(name, buf, strlen(name)) == 0) 131 break; 132 } 133 if (policy == ARRAY_SIZE(ata_lpm_policy_names)) 134 return -EINVAL; 135 136 spin_lock_irqsave(ap->lock, flags); 137 138 ata_for_each_link(link, ap, EDGE) { 139 ata_for_each_dev(dev, &ap->link, ENABLED) { 140 if (dev->horkage & ATA_HORKAGE_NOLPM) { 141 count = -EOPNOTSUPP; 142 goto out_unlock; 143 } 144 } 145 } 146 147 ap->target_lpm_policy = policy; 148 ata_port_schedule_eh(ap); 149out_unlock: 150 spin_unlock_irqrestore(ap->lock, flags); 151 return count; 152} 153 154static ssize_t ata_scsi_lpm_show(struct device *dev, 155 struct device_attribute *attr, char *buf) 156{ 157 struct Scsi_Host *shost = class_to_shost(dev); 158 struct ata_port *ap = ata_shost_to_port(shost); 159 160 if (ap->target_lpm_policy >= ARRAY_SIZE(ata_lpm_policy_names)) 161 return -EINVAL; 162 163 return snprintf(buf, PAGE_SIZE, "%s\n", 164 ata_lpm_policy_names[ap->target_lpm_policy]); 165} 166DEVICE_ATTR(link_power_management_policy, S_IRUGO | S_IWUSR, 167 ata_scsi_lpm_show, ata_scsi_lpm_store); 168EXPORT_SYMBOL_GPL(dev_attr_link_power_management_policy); 169 170static ssize_t ata_scsi_park_show(struct device *device, 171 struct device_attribute *attr, char *buf) 172{ 173 struct scsi_device *sdev = to_scsi_device(device); 174 struct ata_port *ap; 175 struct ata_link *link; 176 struct ata_device *dev; 177 unsigned long flags, now; 178 unsigned int uninitialized_var(msecs); 179 int rc = 0; 180 181 ap = ata_shost_to_port(sdev->host); 182 183 spin_lock_irqsave(ap->lock, flags); 184 dev = ata_scsi_find_dev(ap, sdev); 185 if (!dev) { 186 rc = -ENODEV; 187 goto unlock; 188 } 189 if (dev->flags & ATA_DFLAG_NO_UNLOAD) { 190 rc = -EOPNOTSUPP; 191 goto unlock; 192 } 193 194 link = dev->link; 195 now = jiffies; 196 if (ap->pflags & ATA_PFLAG_EH_IN_PROGRESS && 197 link->eh_context.unloaded_mask & (1 << dev->devno) && 198 time_after(dev->unpark_deadline, now)) 199 msecs = jiffies_to_msecs(dev->unpark_deadline - now); 200 else 201 msecs = 0; 202 203unlock: 204 spin_unlock_irq(ap->lock); 205 206 return rc ? rc : snprintf(buf, 20, "%u\n", msecs); 207} 208 209static ssize_t ata_scsi_park_store(struct device *device, 210 struct device_attribute *attr, 211 const char *buf, size_t len) 212{ 213 struct scsi_device *sdev = to_scsi_device(device); 214 struct ata_port *ap; 215 struct ata_device *dev; 216 long int input; 217 unsigned long flags; 218 int rc; 219 220 rc = kstrtol(buf, 10, &input); 221 if (rc) 222 return rc; 223 if (input < -2) 224 return -EINVAL; 225 if (input > ATA_TMOUT_MAX_PARK) { 226 rc = -EOVERFLOW; 227 input = ATA_TMOUT_MAX_PARK; 228 } 229 230 ap = ata_shost_to_port(sdev->host); 231 232 spin_lock_irqsave(ap->lock, flags); 233 dev = ata_scsi_find_dev(ap, sdev); 234 if (unlikely(!dev)) { 235 rc = -ENODEV; 236 goto unlock; 237 } 238 if (dev->class != ATA_DEV_ATA) { 239 rc = -EOPNOTSUPP; 240 goto unlock; 241 } 242 243 if (input >= 0) { 244 if (dev->flags & ATA_DFLAG_NO_UNLOAD) { 245 rc = -EOPNOTSUPP; 246 goto unlock; 247 } 248 249 dev->unpark_deadline = ata_deadline(jiffies, input); 250 dev->link->eh_info.dev_action[dev->devno] |= ATA_EH_PARK; 251 ata_port_schedule_eh(ap); 252 complete(&ap->park_req_pending); 253 } else { 254 switch (input) { 255 case -1: 256 dev->flags &= ~ATA_DFLAG_NO_UNLOAD; 257 break; 258 case -2: 259 dev->flags |= ATA_DFLAG_NO_UNLOAD; 260 break; 261 } 262 } 263unlock: 264 spin_unlock_irqrestore(ap->lock, flags); 265 266 return rc ? rc : len; 267} 268DEVICE_ATTR(unload_heads, S_IRUGO | S_IWUSR, 269 ata_scsi_park_show, ata_scsi_park_store); 270EXPORT_SYMBOL_GPL(dev_attr_unload_heads); 271 272static void ata_scsi_set_sense(struct scsi_cmnd *cmd, u8 sk, u8 asc, u8 ascq) 273{ 274 cmd->result = (DRIVER_SENSE << 24) | SAM_STAT_CHECK_CONDITION; 275 276 scsi_build_sense_buffer(0, cmd->sense_buffer, sk, asc, ascq); 277} 278 279static ssize_t 280ata_scsi_em_message_store(struct device *dev, struct device_attribute *attr, 281 const char *buf, size_t count) 282{ 283 struct Scsi_Host *shost = class_to_shost(dev); 284 struct ata_port *ap = ata_shost_to_port(shost); 285 if (ap->ops->em_store && (ap->flags & ATA_FLAG_EM)) 286 return ap->ops->em_store(ap, buf, count); 287 return -EINVAL; 288} 289 290static ssize_t 291ata_scsi_em_message_show(struct device *dev, struct device_attribute *attr, 292 char *buf) 293{ 294 struct Scsi_Host *shost = class_to_shost(dev); 295 struct ata_port *ap = ata_shost_to_port(shost); 296 297 if (ap->ops->em_show && (ap->flags & ATA_FLAG_EM)) 298 return ap->ops->em_show(ap, buf); 299 return -EINVAL; 300} 301DEVICE_ATTR(em_message, S_IRUGO | S_IWUSR, 302 ata_scsi_em_message_show, ata_scsi_em_message_store); 303EXPORT_SYMBOL_GPL(dev_attr_em_message); 304 305static ssize_t 306ata_scsi_em_message_type_show(struct device *dev, struct device_attribute *attr, 307 char *buf) 308{ 309 struct Scsi_Host *shost = class_to_shost(dev); 310 struct ata_port *ap = ata_shost_to_port(shost); 311 312 return snprintf(buf, 23, "%d\n", ap->em_message_type); 313} 314DEVICE_ATTR(em_message_type, S_IRUGO, 315 ata_scsi_em_message_type_show, NULL); 316EXPORT_SYMBOL_GPL(dev_attr_em_message_type); 317 318static ssize_t 319ata_scsi_activity_show(struct device *dev, struct device_attribute *attr, 320 char *buf) 321{ 322 struct scsi_device *sdev = to_scsi_device(dev); 323 struct ata_port *ap = ata_shost_to_port(sdev->host); 324 struct ata_device *atadev = ata_scsi_find_dev(ap, sdev); 325 326 if (atadev && ap->ops->sw_activity_show && 327 (ap->flags & ATA_FLAG_SW_ACTIVITY)) 328 return ap->ops->sw_activity_show(atadev, buf); 329 return -EINVAL; 330} 331 332static ssize_t 333ata_scsi_activity_store(struct device *dev, struct device_attribute *attr, 334 const char *buf, size_t count) 335{ 336 struct scsi_device *sdev = to_scsi_device(dev); 337 struct ata_port *ap = ata_shost_to_port(sdev->host); 338 struct ata_device *atadev = ata_scsi_find_dev(ap, sdev); 339 enum sw_activity val; 340 int rc; 341 342 if (atadev && ap->ops->sw_activity_store && 343 (ap->flags & ATA_FLAG_SW_ACTIVITY)) { 344 val = simple_strtoul(buf, NULL, 0); 345 switch (val) { 346 case OFF: case BLINK_ON: case BLINK_OFF: 347 rc = ap->ops->sw_activity_store(atadev, val); 348 if (!rc) 349 return count; 350 else 351 return rc; 352 } 353 } 354 return -EINVAL; 355} 356DEVICE_ATTR(sw_activity, S_IWUSR | S_IRUGO, ata_scsi_activity_show, 357 ata_scsi_activity_store); 358EXPORT_SYMBOL_GPL(dev_attr_sw_activity); 359 360struct device_attribute *ata_common_sdev_attrs[] = { 361 &dev_attr_unload_heads, 362 NULL 363}; 364EXPORT_SYMBOL_GPL(ata_common_sdev_attrs); 365 366static void ata_scsi_invalid_field(struct scsi_cmnd *cmd) 367{ 368 ata_scsi_set_sense(cmd, ILLEGAL_REQUEST, 0x24, 0x0); 369 /* "Invalid field in cbd" */ 370 cmd->scsi_done(cmd); 371} 372 373/** 374 * ata_std_bios_param - generic bios head/sector/cylinder calculator used by sd. 375 * @sdev: SCSI device for which BIOS geometry is to be determined 376 * @bdev: block device associated with @sdev 377 * @capacity: capacity of SCSI device 378 * @geom: location to which geometry will be output 379 * 380 * Generic bios head/sector/cylinder calculator 381 * used by sd. Most BIOSes nowadays expect a XXX/255/16 (CHS) 382 * mapping. Some situations may arise where the disk is not 383 * bootable if this is not used. 384 * 385 * LOCKING: 386 * Defined by the SCSI layer. We don't really care. 387 * 388 * RETURNS: 389 * Zero. 390 */ 391int ata_std_bios_param(struct scsi_device *sdev, struct block_device *bdev, 392 sector_t capacity, int geom[]) 393{ 394 geom[0] = 255; 395 geom[1] = 63; 396 sector_div(capacity, 255*63); 397 geom[2] = capacity; 398 399 return 0; 400} 401 402/** 403 * ata_scsi_unlock_native_capacity - unlock native capacity 404 * @sdev: SCSI device to adjust device capacity for 405 * 406 * This function is called if a partition on @sdev extends beyond 407 * the end of the device. It requests EH to unlock HPA. 408 * 409 * LOCKING: 410 * Defined by the SCSI layer. Might sleep. 411 */ 412void ata_scsi_unlock_native_capacity(struct scsi_device *sdev) 413{ 414 struct ata_port *ap = ata_shost_to_port(sdev->host); 415 struct ata_device *dev; 416 unsigned long flags; 417 418 spin_lock_irqsave(ap->lock, flags); 419 420 dev = ata_scsi_find_dev(ap, sdev); 421 if (dev && dev->n_sectors < dev->n_native_sectors) { 422 dev->flags |= ATA_DFLAG_UNLOCK_HPA; 423 dev->link->eh_info.action |= ATA_EH_RESET; 424 ata_port_schedule_eh(ap); 425 } 426 427 spin_unlock_irqrestore(ap->lock, flags); 428 ata_port_wait_eh(ap); 429} 430 431/** 432 * ata_get_identity - Handler for HDIO_GET_IDENTITY ioctl 433 * @ap: target port 434 * @sdev: SCSI device to get identify data for 435 * @arg: User buffer area for identify data 436 * 437 * LOCKING: 438 * Defined by the SCSI layer. We don't really care. 439 * 440 * RETURNS: 441 * Zero on success, negative errno on error. 442 */ 443static int ata_get_identity(struct ata_port *ap, struct scsi_device *sdev, 444 void __user *arg) 445{ 446 struct ata_device *dev = ata_scsi_find_dev(ap, sdev); 447 u16 __user *dst = arg; 448 char buf[40]; 449 450 if (!dev) 451 return -ENOMSG; 452 453 if (copy_to_user(dst, dev->id, ATA_ID_WORDS * sizeof(u16))) 454 return -EFAULT; 455 456 ata_id_string(dev->id, buf, ATA_ID_PROD, ATA_ID_PROD_LEN); 457 if (copy_to_user(dst + ATA_ID_PROD, buf, ATA_ID_PROD_LEN)) 458 return -EFAULT; 459 460 ata_id_string(dev->id, buf, ATA_ID_FW_REV, ATA_ID_FW_REV_LEN); 461 if (copy_to_user(dst + ATA_ID_FW_REV, buf, ATA_ID_FW_REV_LEN)) 462 return -EFAULT; 463 464 ata_id_string(dev->id, buf, ATA_ID_SERNO, ATA_ID_SERNO_LEN); 465 if (copy_to_user(dst + ATA_ID_SERNO, buf, ATA_ID_SERNO_LEN)) 466 return -EFAULT; 467 468 return 0; 469} 470 471/** 472 * ata_cmd_ioctl - Handler for HDIO_DRIVE_CMD ioctl 473 * @scsidev: Device to which we are issuing command 474 * @arg: User provided data for issuing command 475 * 476 * LOCKING: 477 * Defined by the SCSI layer. We don't really care. 478 * 479 * RETURNS: 480 * Zero on success, negative errno on error. 481 */ 482int ata_cmd_ioctl(struct scsi_device *scsidev, void __user *arg) 483{ 484 int rc = 0; 485 u8 scsi_cmd[MAX_COMMAND_SIZE]; 486 u8 args[4], *argbuf = NULL, *sensebuf = NULL; 487 int argsize = 0; 488 enum dma_data_direction data_dir; 489 int cmd_result; 490 491 if (arg == NULL) 492 return -EINVAL; 493 494 if (copy_from_user(args, arg, sizeof(args))) 495 return -EFAULT; 496 497 sensebuf = kzalloc(SCSI_SENSE_BUFFERSIZE, GFP_NOIO); 498 if (!sensebuf) 499 return -ENOMEM; 500 501 memset(scsi_cmd, 0, sizeof(scsi_cmd)); 502 503 if (args[3]) { 504 argsize = ATA_SECT_SIZE * args[3]; 505 argbuf = kmalloc(argsize, GFP_KERNEL); 506 if (argbuf == NULL) { 507 rc = -ENOMEM; 508 goto error; 509 } 510 511 scsi_cmd[1] = (4 << 1); /* PIO Data-in */ 512 scsi_cmd[2] = 0x0e; /* no off.line or cc, read from dev, 513 block count in sector count field */ 514 data_dir = DMA_FROM_DEVICE; 515 } else { 516 scsi_cmd[1] = (3 << 1); /* Non-data */ 517 scsi_cmd[2] = 0x20; /* cc but no off.line or data xfer */ 518 data_dir = DMA_NONE; 519 } 520 521 scsi_cmd[0] = ATA_16; 522 523 scsi_cmd[4] = args[2]; 524 if (args[0] == ATA_CMD_SMART) { /* hack -- ide driver does this too */ 525 scsi_cmd[6] = args[3]; 526 scsi_cmd[8] = args[1]; 527 scsi_cmd[10] = 0x4f; 528 scsi_cmd[12] = 0xc2; 529 } else { 530 scsi_cmd[6] = args[1]; 531 } 532 scsi_cmd[14] = args[0]; 533 534 /* Good values for timeout and retries? Values below 535 from scsi_ioctl_send_command() for default case... */ 536 cmd_result = scsi_execute(scsidev, scsi_cmd, data_dir, argbuf, argsize, 537 sensebuf, (10*HZ), 5, 0, NULL); 538 539 if (driver_byte(cmd_result) == DRIVER_SENSE) {/* sense data available */ 540 u8 *desc = sensebuf + 8; 541 cmd_result &= ~(0xFF<<24); /* DRIVER_SENSE is not an error */ 542 543 /* If we set cc then ATA pass-through will cause a 544 * check condition even if no error. Filter that. */ 545 if (cmd_result & SAM_STAT_CHECK_CONDITION) { 546 struct scsi_sense_hdr sshdr; 547 scsi_normalize_sense(sensebuf, SCSI_SENSE_BUFFERSIZE, 548 &sshdr); 549 if (sshdr.sense_key == RECOVERED_ERROR && 550 sshdr.asc == 0 && sshdr.ascq == 0x1d) 551 cmd_result &= ~SAM_STAT_CHECK_CONDITION; 552 } 553 554 /* Send userspace a few ATA registers (same as drivers/ide) */ 555 if (sensebuf[0] == 0x72 && /* format is "descriptor" */ 556 desc[0] == 0x09) { /* code is "ATA Descriptor" */ 557 args[0] = desc[13]; /* status */ 558 args[1] = desc[3]; /* error */ 559 args[2] = desc[5]; /* sector count (0:7) */ 560 if (copy_to_user(arg, args, sizeof(args))) 561 rc = -EFAULT; 562 } 563 } 564 565 566 if (cmd_result) { 567 rc = -EIO; 568 goto error; 569 } 570 571 if ((argbuf) 572 && copy_to_user(arg + sizeof(args), argbuf, argsize)) 573 rc = -EFAULT; 574error: 575 kfree(sensebuf); 576 kfree(argbuf); 577 return rc; 578} 579 580/** 581 * ata_task_ioctl - Handler for HDIO_DRIVE_TASK ioctl 582 * @scsidev: Device to which we are issuing command 583 * @arg: User provided data for issuing command 584 * 585 * LOCKING: 586 * Defined by the SCSI layer. We don't really care. 587 * 588 * RETURNS: 589 * Zero on success, negative errno on error. 590 */ 591int ata_task_ioctl(struct scsi_device *scsidev, void __user *arg) 592{ 593 int rc = 0; 594 u8 scsi_cmd[MAX_COMMAND_SIZE]; 595 u8 args[7], *sensebuf = NULL; 596 int cmd_result; 597 598 if (arg == NULL) 599 return -EINVAL; 600 601 if (copy_from_user(args, arg, sizeof(args))) 602 return -EFAULT; 603 604 sensebuf = kzalloc(SCSI_SENSE_BUFFERSIZE, GFP_NOIO); 605 if (!sensebuf) 606 return -ENOMEM; 607 608 memset(scsi_cmd, 0, sizeof(scsi_cmd)); 609 scsi_cmd[0] = ATA_16; 610 scsi_cmd[1] = (3 << 1); /* Non-data */ 611 scsi_cmd[2] = 0x20; /* cc but no off.line or data xfer */ 612 scsi_cmd[4] = args[1]; 613 scsi_cmd[6] = args[2]; 614 scsi_cmd[8] = args[3]; 615 scsi_cmd[10] = args[4]; 616 scsi_cmd[12] = args[5]; 617 scsi_cmd[13] = args[6] & 0x4f; 618 scsi_cmd[14] = args[0]; 619 620 /* Good values for timeout and retries? Values below 621 from scsi_ioctl_send_command() for default case... */ 622 cmd_result = scsi_execute(scsidev, scsi_cmd, DMA_NONE, NULL, 0, 623 sensebuf, (10*HZ), 5, 0, NULL); 624 625 if (driver_byte(cmd_result) == DRIVER_SENSE) {/* sense data available */ 626 u8 *desc = sensebuf + 8; 627 cmd_result &= ~(0xFF<<24); /* DRIVER_SENSE is not an error */ 628 629 /* If we set cc then ATA pass-through will cause a 630 * check condition even if no error. Filter that. */ 631 if (cmd_result & SAM_STAT_CHECK_CONDITION) { 632 struct scsi_sense_hdr sshdr; 633 scsi_normalize_sense(sensebuf, SCSI_SENSE_BUFFERSIZE, 634 &sshdr); 635 if (sshdr.sense_key == RECOVERED_ERROR && 636 sshdr.asc == 0 && sshdr.ascq == 0x1d) 637 cmd_result &= ~SAM_STAT_CHECK_CONDITION; 638 } 639 640 /* Send userspace ATA registers */ 641 if (sensebuf[0] == 0x72 && /* format is "descriptor" */ 642 desc[0] == 0x09) {/* code is "ATA Descriptor" */ 643 args[0] = desc[13]; /* status */ 644 args[1] = desc[3]; /* error */ 645 args[2] = desc[5]; /* sector count (0:7) */ 646 args[3] = desc[7]; /* lbal */ 647 args[4] = desc[9]; /* lbam */ 648 args[5] = desc[11]; /* lbah */ 649 args[6] = desc[12]; /* select */ 650 if (copy_to_user(arg, args, sizeof(args))) 651 rc = -EFAULT; 652 } 653 } 654 655 if (cmd_result) { 656 rc = -EIO; 657 goto error; 658 } 659 660 error: 661 kfree(sensebuf); 662 return rc; 663} 664 665static int ata_ioc32(struct ata_port *ap) 666{ 667 if (ap->flags & ATA_FLAG_PIO_DMA) 668 return 1; 669 if (ap->pflags & ATA_PFLAG_PIO32) 670 return 1; 671 return 0; 672} 673 674int ata_sas_scsi_ioctl(struct ata_port *ap, struct scsi_device *scsidev, 675 int cmd, void __user *arg) 676{ 677 int val = -EINVAL, rc = -EINVAL; 678 unsigned long flags; 679 680 switch (cmd) { 681 case ATA_IOC_GET_IO32: 682 spin_lock_irqsave(ap->lock, flags); 683 val = ata_ioc32(ap); 684 spin_unlock_irqrestore(ap->lock, flags); 685 if (copy_to_user(arg, &val, 1)) 686 return -EFAULT; 687 return 0; 688 689 case ATA_IOC_SET_IO32: 690 val = (unsigned long) arg; 691 rc = 0; 692 spin_lock_irqsave(ap->lock, flags); 693 if (ap->pflags & ATA_PFLAG_PIO32CHANGE) { 694 if (val) 695 ap->pflags |= ATA_PFLAG_PIO32; 696 else 697 ap->pflags &= ~ATA_PFLAG_PIO32; 698 } else { 699 if (val != ata_ioc32(ap)) 700 rc = -EINVAL; 701 } 702 spin_unlock_irqrestore(ap->lock, flags); 703 return rc; 704 705 case HDIO_GET_IDENTITY: 706 return ata_get_identity(ap, scsidev, arg); 707 708 case HDIO_DRIVE_CMD: 709 if (!capable(CAP_SYS_ADMIN) || !capable(CAP_SYS_RAWIO)) 710 return -EACCES; 711 return ata_cmd_ioctl(scsidev, arg); 712 713 case HDIO_DRIVE_TASK: 714 if (!capable(CAP_SYS_ADMIN) || !capable(CAP_SYS_RAWIO)) 715 return -EACCES; 716 return ata_task_ioctl(scsidev, arg); 717 718 default: 719 rc = -ENOTTY; 720 break; 721 } 722 723 return rc; 724} 725EXPORT_SYMBOL_GPL(ata_sas_scsi_ioctl); 726 727int ata_scsi_ioctl(struct scsi_device *scsidev, int cmd, void __user *arg) 728{ 729 return ata_sas_scsi_ioctl(ata_shost_to_port(scsidev->host), 730 scsidev, cmd, arg); 731} 732EXPORT_SYMBOL_GPL(ata_scsi_ioctl); 733 734/** 735 * ata_scsi_qc_new - acquire new ata_queued_cmd reference 736 * @dev: ATA device to which the new command is attached 737 * @cmd: SCSI command that originated this ATA command 738 * 739 * Obtain a reference to an unused ata_queued_cmd structure, 740 * which is the basic libata structure representing a single 741 * ATA command sent to the hardware. 742 * 743 * If a command was available, fill in the SCSI-specific 744 * portions of the structure with information on the 745 * current command. 746 * 747 * LOCKING: 748 * spin_lock_irqsave(host lock) 749 * 750 * RETURNS: 751 * Command allocated, or %NULL if none available. 752 */ 753static struct ata_queued_cmd *ata_scsi_qc_new(struct ata_device *dev, 754 struct scsi_cmnd *cmd) 755{ 756 struct ata_queued_cmd *qc; 757 758 qc = ata_qc_new_init(dev); 759 if (qc) { 760 qc->scsicmd = cmd; 761 qc->scsidone = cmd->scsi_done; 762 763 qc->sg = scsi_sglist(cmd); 764 qc->n_elem = scsi_sg_count(cmd); 765 } else { 766 cmd->result = (DID_OK << 16) | (QUEUE_FULL << 1); 767 cmd->scsi_done(cmd); 768 } 769 770 return qc; 771} 772 773static void ata_qc_set_pc_nbytes(struct ata_queued_cmd *qc) 774{ 775 struct scsi_cmnd *scmd = qc->scsicmd; 776 777 qc->extrabytes = scmd->request->extra_len; 778 qc->nbytes = scsi_bufflen(scmd) + qc->extrabytes; 779} 780 781/** 782 * ata_dump_status - user friendly display of error info 783 * @id: id of the port in question 784 * @tf: ptr to filled out taskfile 785 * 786 * Decode and dump the ATA error/status registers for the user so 787 * that they have some idea what really happened at the non 788 * make-believe layer. 789 * 790 * LOCKING: 791 * inherited from caller 792 */ 793static void ata_dump_status(unsigned id, struct ata_taskfile *tf) 794{ 795 u8 stat = tf->command, err = tf->feature; 796 797 printk(KERN_WARNING "ata%u: status=0x%02x { ", id, stat); 798 if (stat & ATA_BUSY) { 799 printk("Busy }\n"); /* Data is not valid in this case */ 800 } else { 801 if (stat & 0x40) printk("DriveReady "); 802 if (stat & 0x20) printk("DeviceFault "); 803 if (stat & 0x10) printk("SeekComplete "); 804 if (stat & 0x08) printk("DataRequest "); 805 if (stat & 0x04) printk("CorrectedError "); 806 if (stat & 0x02) printk("Index "); 807 if (stat & 0x01) printk("Error "); 808 printk("}\n"); 809 810 if (err) { 811 printk(KERN_WARNING "ata%u: error=0x%02x { ", id, err); 812 if (err & 0x04) printk("DriveStatusError "); 813 if (err & 0x80) { 814 if (err & 0x04) printk("BadCRC "); 815 else printk("Sector "); 816 } 817 if (err & 0x40) printk("UncorrectableError "); 818 if (err & 0x10) printk("SectorIdNotFound "); 819 if (err & 0x02) printk("TrackZeroNotFound "); 820 if (err & 0x01) printk("AddrMarkNotFound "); 821 printk("}\n"); 822 } 823 } 824} 825 826/** 827 * ata_to_sense_error - convert ATA error to SCSI error 828 * @id: ATA device number 829 * @drv_stat: value contained in ATA status register 830 * @drv_err: value contained in ATA error register 831 * @sk: the sense key we'll fill out 832 * @asc: the additional sense code we'll fill out 833 * @ascq: the additional sense code qualifier we'll fill out 834 * @verbose: be verbose 835 * 836 * Converts an ATA error into a SCSI error. Fill out pointers to 837 * SK, ASC, and ASCQ bytes for later use in fixed or descriptor 838 * format sense blocks. 839 * 840 * LOCKING: 841 * spin_lock_irqsave(host lock) 842 */ 843static void ata_to_sense_error(unsigned id, u8 drv_stat, u8 drv_err, u8 *sk, 844 u8 *asc, u8 *ascq, int verbose) 845{ 846 int i; 847 848 /* Based on the 3ware driver translation table */ 849 static const unsigned char sense_table[][4] = { 850 /* BBD|ECC|ID|MAR */ 851 {0xd1, ABORTED_COMMAND, 0x00, 0x00}, // Device busy Aborted command 852 /* BBD|ECC|ID */ 853 {0xd0, ABORTED_COMMAND, 0x00, 0x00}, // Device busy Aborted command 854 /* ECC|MC|MARK */ 855 {0x61, HARDWARE_ERROR, 0x00, 0x00}, // Device fault Hardware error 856 /* ICRC|ABRT */ /* NB: ICRC & !ABRT is BBD */ 857 {0x84, ABORTED_COMMAND, 0x47, 0x00}, // Data CRC error SCSI parity error 858 /* MC|ID|ABRT|TRK0|MARK */ 859 {0x37, NOT_READY, 0x04, 0x00}, // Unit offline Not ready 860 /* MCR|MARK */ 861 {0x09, NOT_READY, 0x04, 0x00}, // Unrecovered disk error Not ready 862 /* Bad address mark */ 863 {0x01, MEDIUM_ERROR, 0x13, 0x00}, // Address mark not found Address mark not found for data field 864 /* TRK0 */ 865 {0x02, HARDWARE_ERROR, 0x00, 0x00}, // Track 0 not found Hardware error 866 /* Abort: 0x04 is not translated here, see below */ 867 /* Media change request */ 868 {0x08, NOT_READY, 0x04, 0x00}, // Media change request FIXME: faking offline 869 /* SRV/IDNF */ 870 {0x10, ILLEGAL_REQUEST, 0x21, 0x00}, // ID not found Logical address out of range 871 /* MC */ 872 {0x20, UNIT_ATTENTION, 0x28, 0x00}, // Media Changed Not ready to ready change, medium may have changed 873 /* ECC */ 874 {0x40, MEDIUM_ERROR, 0x11, 0x04}, // Uncorrectable ECC error Unrecovered read error 875 /* BBD - block marked bad */ 876 {0x80, MEDIUM_ERROR, 0x11, 0x04}, // Block marked bad Medium error, unrecovered read error 877 {0xFF, 0xFF, 0xFF, 0xFF}, // END mark 878 }; 879 static const unsigned char stat_table[][4] = { 880 /* Must be first because BUSY means no other bits valid */ 881 {0x80, ABORTED_COMMAND, 0x47, 0x00}, // Busy, fake parity for now 882 {0x20, HARDWARE_ERROR, 0x44, 0x00}, // Device fault, internal target failure 883 {0x08, ABORTED_COMMAND, 0x47, 0x00}, // Timed out in xfer, fake parity for now 884 {0x04, RECOVERED_ERROR, 0x11, 0x00}, // Recovered ECC error Medium error, recovered 885 {0xFF, 0xFF, 0xFF, 0xFF}, // END mark 886 }; 887 888 /* 889 * Is this an error we can process/parse 890 */ 891 if (drv_stat & ATA_BUSY) { 892 drv_err = 0; /* Ignore the err bits, they're invalid */ 893 } 894 895 if (drv_err) { 896 /* Look for drv_err */ 897 for (i = 0; sense_table[i][0] != 0xFF; i++) { 898 /* Look for best matches first */ 899 if ((sense_table[i][0] & drv_err) == 900 sense_table[i][0]) { 901 *sk = sense_table[i][1]; 902 *asc = sense_table[i][2]; 903 *ascq = sense_table[i][3]; 904 goto translate_done; 905 } 906 } 907 } 908 909 /* 910 * Fall back to interpreting status bits. Note that if the drv_err 911 * has only the ABRT bit set, we decode drv_stat. ABRT by itself 912 * is not descriptive enough. 913 */ 914 for (i = 0; stat_table[i][0] != 0xFF; i++) { 915 if (stat_table[i][0] & drv_stat) { 916 *sk = stat_table[i][1]; 917 *asc = stat_table[i][2]; 918 *ascq = stat_table[i][3]; 919 goto translate_done; 920 } 921 } 922 923 /* 924 * We need a sensible error return here, which is tricky, and one 925 * that won't cause people to do things like return a disk wrongly. 926 */ 927 *sk = ABORTED_COMMAND; 928 *asc = 0x00; 929 *ascq = 0x00; 930 931 translate_done: 932 if (verbose) 933 printk(KERN_ERR "ata%u: translated ATA stat/err 0x%02x/%02x " 934 "to SCSI SK/ASC/ASCQ 0x%x/%02x/%02x\n", 935 id, drv_stat, drv_err, *sk, *asc, *ascq); 936 return; 937} 938 939/* 940 * ata_gen_passthru_sense - Generate check condition sense block. 941 * @qc: Command that completed. 942 * 943 * This function is specific to the ATA descriptor format sense 944 * block specified for the ATA pass through commands. Regardless 945 * of whether the command errored or not, return a sense 946 * block. Copy all controller registers into the sense 947 * block. If there was no error, we get the request from an ATA 948 * passthrough command, so we use the following sense data: 949 * sk = RECOVERED ERROR 950 * asc,ascq = ATA PASS-THROUGH INFORMATION AVAILABLE 951 * 952 * 953 * LOCKING: 954 * None. 955 */ 956static void ata_gen_passthru_sense(struct ata_queued_cmd *qc) 957{ 958 struct scsi_cmnd *cmd = qc->scsicmd; 959 struct ata_taskfile *tf = &qc->result_tf; 960 unsigned char *sb = cmd->sense_buffer; 961 unsigned char *desc = sb + 8; 962 int verbose = qc->ap->ops->error_handler == NULL; 963 964 memset(sb, 0, SCSI_SENSE_BUFFERSIZE); 965 966 cmd->result = (DRIVER_SENSE << 24) | SAM_STAT_CHECK_CONDITION; 967 968 /* 969 * Use ata_to_sense_error() to map status register bits 970 * onto sense key, asc & ascq. 971 */ 972 if (qc->err_mask || 973 tf->command & (ATA_BUSY | ATA_DF | ATA_ERR | ATA_DRQ)) { 974 ata_to_sense_error(qc->ap->print_id, tf->command, tf->feature, 975 &sb[1], &sb[2], &sb[3], verbose); 976 sb[1] &= 0x0f; 977 } else { 978 sb[1] = RECOVERED_ERROR; 979 sb[2] = 0; 980 sb[3] = 0x1D; 981 } 982 983 /* 984 * Sense data is current and format is descriptor. 985 */ 986 sb[0] = 0x72; 987 988 desc[0] = 0x09; 989 990 /* set length of additional sense data */ 991 sb[7] = 14; 992 desc[1] = 12; 993 994 /* 995 * Copy registers into sense buffer. 996 */ 997 desc[2] = 0x00; 998 desc[3] = tf->feature; /* == error reg */ 999 desc[5] = tf->nsect; 1000 desc[7] = tf->lbal; 1001 desc[9] = tf->lbam; 1002 desc[11] = tf->lbah; 1003 desc[12] = tf->device; 1004 desc[13] = tf->command; /* == status reg */ 1005 1006 /* 1007 * Fill in Extend bit, and the high order bytes 1008 * if applicable. 1009 */ 1010 if (tf->flags & ATA_TFLAG_LBA48) { 1011 desc[2] |= 0x01; 1012 desc[4] = tf->hob_nsect; 1013 desc[6] = tf->hob_lbal; 1014 desc[8] = tf->hob_lbam; 1015 desc[10] = tf->hob_lbah; 1016 } 1017} 1018 1019/** 1020 * ata_gen_ata_sense - generate a SCSI fixed sense block 1021 * @qc: Command that we are erroring out 1022 * 1023 * Generate sense block for a failed ATA command @qc. Descriptor 1024 * format is used to accommodate LBA48 block address. 1025 * 1026 * LOCKING: 1027 * None. 1028 */ 1029static void ata_gen_ata_sense(struct ata_queued_cmd *qc) 1030{ 1031 struct ata_device *dev = qc->dev; 1032 struct scsi_cmnd *cmd = qc->scsicmd; 1033 struct ata_taskfile *tf = &qc->result_tf; 1034 unsigned char *sb = cmd->sense_buffer; 1035 unsigned char *desc = sb + 8; 1036 int verbose = qc->ap->ops->error_handler == NULL; 1037 u64 block; 1038 1039 memset(sb, 0, SCSI_SENSE_BUFFERSIZE); 1040 1041 cmd->result = (DRIVER_SENSE << 24) | SAM_STAT_CHECK_CONDITION; 1042 1043 /* sense data is current and format is descriptor */ 1044 sb[0] = 0x72; 1045 1046 /* Use ata_to_sense_error() to map status register bits 1047 * onto sense key, asc & ascq. 1048 */ 1049 if (qc->err_mask || 1050 tf->command & (ATA_BUSY | ATA_DF | ATA_ERR | ATA_DRQ)) { 1051 ata_to_sense_error(qc->ap->print_id, tf->command, tf->feature, 1052 &sb[1], &sb[2], &sb[3], verbose); 1053 sb[1] &= 0x0f; 1054 } 1055 1056 block = ata_tf_read_block(&qc->result_tf, dev); 1057 1058 /* information sense data descriptor */ 1059 sb[7] = 12; 1060 desc[0] = 0x00; 1061 desc[1] = 10; 1062 1063 desc[2] |= 0x80; /* valid */ 1064 desc[6] = block >> 40; 1065 desc[7] = block >> 32; 1066 desc[8] = block >> 24; 1067 desc[9] = block >> 16; 1068 desc[10] = block >> 8; 1069 desc[11] = block; 1070} 1071 1072static void ata_scsi_sdev_config(struct scsi_device *sdev) 1073{ 1074 sdev->use_10_for_rw = 1; 1075 sdev->use_10_for_ms = 1; 1076 sdev->no_report_opcodes = 1; 1077 sdev->no_write_same = 1; 1078 1079 /* Schedule policy is determined by ->qc_defer() callback and 1080 * it needs to see every deferred qc. Set dev_blocked to 1 to 1081 * prevent SCSI midlayer from automatically deferring 1082 * requests. 1083 */ 1084 sdev->max_device_blocked = 1; 1085} 1086 1087/** 1088 * atapi_drain_needed - Check whether data transfer may overflow 1089 * @rq: request to be checked 1090 * 1091 * ATAPI commands which transfer variable length data to host 1092 * might overflow due to application error or hardare bug. This 1093 * function checks whether overflow should be drained and ignored 1094 * for @request. 1095 * 1096 * LOCKING: 1097 * None. 1098 * 1099 * RETURNS: 1100 * 1 if ; otherwise, 0. 1101 */ 1102static int atapi_drain_needed(struct request *rq) 1103{ 1104 if (likely(rq->cmd_type != REQ_TYPE_BLOCK_PC)) 1105 return 0; 1106 1107 if (!blk_rq_bytes(rq) || (rq->cmd_flags & REQ_WRITE)) 1108 return 0; 1109 1110 return atapi_cmd_type(rq->cmd[0]) == ATAPI_MISC; 1111} 1112 1113static int ata_scsi_dev_config(struct scsi_device *sdev, 1114 struct ata_device *dev) 1115{ 1116 struct request_queue *q = sdev->request_queue; 1117 1118 if (!ata_id_has_unload(dev->id)) 1119 dev->flags |= ATA_DFLAG_NO_UNLOAD; 1120 1121 /* configure max sectors */ 1122 blk_queue_max_hw_sectors(q, dev->max_sectors); 1123 1124 if (dev->class == ATA_DEV_ATAPI) { 1125 void *buf; 1126 1127 sdev->sector_size = ATA_SECT_SIZE; 1128 1129 /* set DMA padding */ 1130 blk_queue_update_dma_pad(q, ATA_DMA_PAD_SZ - 1); 1131 1132 /* configure draining */ 1133 buf = kmalloc(ATAPI_MAX_DRAIN, q->bounce_gfp | GFP_KERNEL); 1134 if (!buf) { 1135 ata_dev_err(dev, "drain buffer allocation failed\n"); 1136 return -ENOMEM; 1137 } 1138 1139 blk_queue_dma_drain(q, atapi_drain_needed, buf, ATAPI_MAX_DRAIN); 1140 } else { 1141 sdev->sector_size = ata_id_logical_sector_size(dev->id); 1142 sdev->manage_start_stop = 1; 1143 } 1144 1145 /* 1146 * ata_pio_sectors() expects buffer for each sector to not cross 1147 * page boundary. Enforce it by requiring buffers to be sector 1148 * aligned, which works iff sector_size is not larger than 1149 * PAGE_SIZE. ATAPI devices also need the alignment as 1150 * IDENTIFY_PACKET is executed as ATA_PROT_PIO. 1151 */ 1152 if (sdev->sector_size > PAGE_SIZE) 1153 ata_dev_warn(dev, 1154 "sector_size=%u > PAGE_SIZE, PIO may malfunction\n", 1155 sdev->sector_size); 1156 1157 blk_queue_update_dma_alignment(q, sdev->sector_size - 1); 1158 1159 if (dev->flags & ATA_DFLAG_AN) 1160 set_bit(SDEV_EVT_MEDIA_CHANGE, sdev->supported_events); 1161 1162 if (dev->flags & ATA_DFLAG_NCQ) { 1163 int depth; 1164 1165 depth = min(sdev->host->can_queue, ata_id_queue_depth(dev->id)); 1166 depth = min(ATA_MAX_QUEUE - 1, depth); 1167 scsi_adjust_queue_depth(sdev, MSG_SIMPLE_TAG, depth); 1168 } 1169 1170 blk_queue_flush_queueable(q, false); 1171 1172 dev->sdev = sdev; 1173 return 0; 1174} 1175 1176/** 1177 * ata_scsi_slave_config - Set SCSI device attributes 1178 * @sdev: SCSI device to examine 1179 * 1180 * This is called before we actually start reading 1181 * and writing to the device, to configure certain 1182 * SCSI mid-layer behaviors. 1183 * 1184 * LOCKING: 1185 * Defined by SCSI layer. We don't really care. 1186 */ 1187 1188int ata_scsi_slave_config(struct scsi_device *sdev) 1189{ 1190 struct ata_port *ap = ata_shost_to_port(sdev->host); 1191 struct ata_device *dev = __ata_scsi_find_dev(ap, sdev); 1192 int rc = 0; 1193 1194 ata_scsi_sdev_config(sdev); 1195 1196 if (dev) 1197 rc = ata_scsi_dev_config(sdev, dev); 1198 1199 return rc; 1200} 1201 1202/** 1203 * ata_scsi_slave_destroy - SCSI device is about to be destroyed 1204 * @sdev: SCSI device to be destroyed 1205 * 1206 * @sdev is about to be destroyed for hot/warm unplugging. If 1207 * this unplugging was initiated by libata as indicated by NULL 1208 * dev->sdev, this function doesn't have to do anything. 1209 * Otherwise, SCSI layer initiated warm-unplug is in progress. 1210 * Clear dev->sdev, schedule the device for ATA detach and invoke 1211 * EH. 1212 * 1213 * LOCKING: 1214 * Defined by SCSI layer. We don't really care. 1215 */ 1216void ata_scsi_slave_destroy(struct scsi_device *sdev) 1217{ 1218 struct ata_port *ap = ata_shost_to_port(sdev->host); 1219 struct request_queue *q = sdev->request_queue; 1220 unsigned long flags; 1221 struct ata_device *dev; 1222 1223 if (!ap->ops->error_handler) 1224 return; 1225 1226 spin_lock_irqsave(ap->lock, flags); 1227 dev = __ata_scsi_find_dev(ap, sdev); 1228 if (dev && dev->sdev) { 1229 /* SCSI device already in CANCEL state, no need to offline it */ 1230 dev->sdev = NULL; 1231 dev->flags |= ATA_DFLAG_DETACH; 1232 ata_port_schedule_eh(ap); 1233 } 1234 spin_unlock_irqrestore(ap->lock, flags); 1235 1236 kfree(q->dma_drain_buffer); 1237 q->dma_drain_buffer = NULL; 1238 q->dma_drain_size = 0; 1239} 1240 1241/** 1242 * __ata_change_queue_depth - helper for ata_scsi_change_queue_depth 1243 * @ap: ATA port to which the device change the queue depth 1244 * @sdev: SCSI device to configure queue depth for 1245 * @queue_depth: new queue depth 1246 * @reason: calling context 1247 * 1248 * libsas and libata have different approaches for associating a sdev to 1249 * its ata_port. 1250 * 1251 */ 1252int __ata_change_queue_depth(struct ata_port *ap, struct scsi_device *sdev, 1253 int queue_depth, int reason) 1254{ 1255 struct ata_device *dev; 1256 unsigned long flags; 1257 1258 if (reason != SCSI_QDEPTH_DEFAULT) 1259 return -EOPNOTSUPP; 1260 1261 if (queue_depth < 1 || queue_depth == sdev->queue_depth) 1262 return sdev->queue_depth; 1263 1264 dev = ata_scsi_find_dev(ap, sdev); 1265 if (!dev || !ata_dev_enabled(dev)) 1266 return sdev->queue_depth; 1267 1268 /* NCQ enabled? */ 1269 spin_lock_irqsave(ap->lock, flags); 1270 dev->flags &= ~ATA_DFLAG_NCQ_OFF; 1271 if (queue_depth == 1 || !ata_ncq_enabled(dev)) { 1272 dev->flags |= ATA_DFLAG_NCQ_OFF; 1273 queue_depth = 1; 1274 } 1275 spin_unlock_irqrestore(ap->lock, flags); 1276 1277 /* limit and apply queue depth */ 1278 queue_depth = min(queue_depth, sdev->host->can_queue); 1279 queue_depth = min(queue_depth, ata_id_queue_depth(dev->id)); 1280 queue_depth = min(queue_depth, ATA_MAX_QUEUE - 1); 1281 1282 if (sdev->queue_depth == queue_depth) 1283 return -EINVAL; 1284 1285 scsi_adjust_queue_depth(sdev, MSG_SIMPLE_TAG, queue_depth); 1286 return queue_depth; 1287} 1288 1289/** 1290 * ata_scsi_change_queue_depth - SCSI callback for queue depth config 1291 * @sdev: SCSI device to configure queue depth for 1292 * @queue_depth: new queue depth 1293 * @reason: calling context 1294 * 1295 * This is libata standard hostt->change_queue_depth callback. 1296 * SCSI will call into this callback when user tries to set queue 1297 * depth via sysfs. 1298 * 1299 * LOCKING: 1300 * SCSI layer (we don't care) 1301 * 1302 * RETURNS: 1303 * Newly configured queue depth. 1304 */ 1305int ata_scsi_change_queue_depth(struct scsi_device *sdev, int queue_depth, 1306 int reason) 1307{ 1308 struct ata_port *ap = ata_shost_to_port(sdev->host); 1309 1310 return __ata_change_queue_depth(ap, sdev, queue_depth, reason); 1311} 1312 1313/** 1314 * ata_scsi_start_stop_xlat - Translate SCSI START STOP UNIT command 1315 * @qc: Storage for translated ATA taskfile 1316 * 1317 * Sets up an ATA taskfile to issue STANDBY (to stop) or READ VERIFY 1318 * (to start). Perhaps these commands should be preceded by 1319 * CHECK POWER MODE to see what power mode the device is already in. 1320 * [See SAT revision 5 at www.t10.org] 1321 * 1322 * LOCKING: 1323 * spin_lock_irqsave(host lock) 1324 * 1325 * RETURNS: 1326 * Zero on success, non-zero on error. 1327 */ 1328static unsigned int ata_scsi_start_stop_xlat(struct ata_queued_cmd *qc) 1329{ 1330 struct scsi_cmnd *scmd = qc->scsicmd; 1331 struct ata_taskfile *tf = &qc->tf; 1332 const u8 *cdb = scmd->cmnd; 1333 1334 if (scmd->cmd_len < 5) 1335 goto invalid_fld; 1336 1337 tf->flags |= ATA_TFLAG_DEVICE | ATA_TFLAG_ISADDR; 1338 tf->protocol = ATA_PROT_NODATA; 1339 if (cdb[1] & 0x1) { 1340 ; /* ignore IMMED bit, violates sat-r05 */ 1341 } 1342 if (cdb[4] & 0x2) 1343 goto invalid_fld; /* LOEJ bit set not supported */ 1344 if (((cdb[4] >> 4) & 0xf) != 0) 1345 goto invalid_fld; /* power conditions not supported */ 1346 1347 if (cdb[4] & 0x1) { 1348 tf->nsect = 1; /* 1 sector, lba=0 */ 1349 1350 if (qc->dev->flags & ATA_DFLAG_LBA) { 1351 tf->flags |= ATA_TFLAG_LBA; 1352 1353 tf->lbah = 0x0; 1354 tf->lbam = 0x0; 1355 tf->lbal = 0x0; 1356 tf->device |= ATA_LBA; 1357 } else { 1358 /* CHS */ 1359 tf->lbal = 0x1; /* sect */ 1360 tf->lbam = 0x0; /* cyl low */ 1361 tf->lbah = 0x0; /* cyl high */ 1362 } 1363 1364 tf->command = ATA_CMD_VERIFY; /* READ VERIFY */ 1365 } else { 1366 /* Some odd clown BIOSen issue spindown on power off (ACPI S4 1367 * or S5) causing some drives to spin up and down again. 1368 */ 1369 if ((qc->ap->flags & ATA_FLAG_NO_POWEROFF_SPINDOWN) && 1370 system_state == SYSTEM_POWER_OFF) 1371 goto skip; 1372 1373 if ((qc->ap->flags & ATA_FLAG_NO_HIBERNATE_SPINDOWN) && 1374 system_entering_hibernation()) 1375 goto skip; 1376 1377 /* Issue ATA STANDBY IMMEDIATE command */ 1378 tf->command = ATA_CMD_STANDBYNOW1; 1379 } 1380 1381 /* 1382 * Standby and Idle condition timers could be implemented but that 1383 * would require libata to implement the Power condition mode page 1384 * and allow the user to change it. Changing mode pages requires 1385 * MODE SELECT to be implemented. 1386 */ 1387 1388 return 0; 1389 1390 invalid_fld: 1391 ata_scsi_set_sense(scmd, ILLEGAL_REQUEST, 0x24, 0x0); 1392 /* "Invalid field in cbd" */ 1393 return 1; 1394 skip: 1395 scmd->result = SAM_STAT_GOOD; 1396 return 1; 1397} 1398 1399 1400/** 1401 * ata_scsi_flush_xlat - Translate SCSI SYNCHRONIZE CACHE command 1402 * @qc: Storage for translated ATA taskfile 1403 * 1404 * Sets up an ATA taskfile to issue FLUSH CACHE or 1405 * FLUSH CACHE EXT. 1406 * 1407 * LOCKING: 1408 * spin_lock_irqsave(host lock) 1409 * 1410 * RETURNS: 1411 * Zero on success, non-zero on error. 1412 */ 1413static unsigned int ata_scsi_flush_xlat(struct ata_queued_cmd *qc) 1414{ 1415 struct ata_taskfile *tf = &qc->tf; 1416 1417 tf->flags |= ATA_TFLAG_DEVICE; 1418 tf->protocol = ATA_PROT_NODATA; 1419 1420 if (qc->dev->flags & ATA_DFLAG_FLUSH_EXT) 1421 tf->command = ATA_CMD_FLUSH_EXT; 1422 else 1423 tf->command = ATA_CMD_FLUSH; 1424 1425 /* flush is critical for IO integrity, consider it an IO command */ 1426 qc->flags |= ATA_QCFLAG_IO; 1427 1428 return 0; 1429} 1430 1431/** 1432 * scsi_6_lba_len - Get LBA and transfer length 1433 * @cdb: SCSI command to translate 1434 * 1435 * Calculate LBA and transfer length for 6-byte commands. 1436 * 1437 * RETURNS: 1438 * @plba: the LBA 1439 * @plen: the transfer length 1440 */ 1441static void scsi_6_lba_len(const u8 *cdb, u64 *plba, u32 *plen) 1442{ 1443 u64 lba = 0; 1444 u32 len; 1445 1446 VPRINTK("six-byte command\n"); 1447 1448 lba |= ((u64)(cdb[1] & 0x1f)) << 16; 1449 lba |= ((u64)cdb[2]) << 8; 1450 lba |= ((u64)cdb[3]); 1451 1452 len = cdb[4]; 1453 1454 *plba = lba; 1455 *plen = len; 1456} 1457 1458/** 1459 * scsi_10_lba_len - Get LBA and transfer length 1460 * @cdb: SCSI command to translate 1461 * 1462 * Calculate LBA and transfer length for 10-byte commands. 1463 * 1464 * RETURNS: 1465 * @plba: the LBA 1466 * @plen: the transfer length 1467 */ 1468static void scsi_10_lba_len(const u8 *cdb, u64 *plba, u32 *plen) 1469{ 1470 u64 lba = 0; 1471 u32 len = 0; 1472 1473 VPRINTK("ten-byte command\n"); 1474 1475 lba |= ((u64)cdb[2]) << 24; 1476 lba |= ((u64)cdb[3]) << 16; 1477 lba |= ((u64)cdb[4]) << 8; 1478 lba |= ((u64)cdb[5]); 1479 1480 len |= ((u32)cdb[7]) << 8; 1481 len |= ((u32)cdb[8]); 1482 1483 *plba = lba; 1484 *plen = len; 1485} 1486 1487/** 1488 * scsi_16_lba_len - Get LBA and transfer length 1489 * @cdb: SCSI command to translate 1490 * 1491 * Calculate LBA and transfer length for 16-byte commands. 1492 * 1493 * RETURNS: 1494 * @plba: the LBA 1495 * @plen: the transfer length 1496 */ 1497static void scsi_16_lba_len(const u8 *cdb, u64 *plba, u32 *plen) 1498{ 1499 u64 lba = 0; 1500 u32 len = 0; 1501 1502 VPRINTK("sixteen-byte command\n"); 1503 1504 lba |= ((u64)cdb[2]) << 56; 1505 lba |= ((u64)cdb[3]) << 48; 1506 lba |= ((u64)cdb[4]) << 40; 1507 lba |= ((u64)cdb[5]) << 32; 1508 lba |= ((u64)cdb[6]) << 24; 1509 lba |= ((u64)cdb[7]) << 16; 1510 lba |= ((u64)cdb[8]) << 8; 1511 lba |= ((u64)cdb[9]); 1512 1513 len |= ((u32)cdb[10]) << 24; 1514 len |= ((u32)cdb[11]) << 16; 1515 len |= ((u32)cdb[12]) << 8; 1516 len |= ((u32)cdb[13]); 1517 1518 *plba = lba; 1519 *plen = len; 1520} 1521 1522/** 1523 * ata_scsi_verify_xlat - Translate SCSI VERIFY command into an ATA one 1524 * @qc: Storage for translated ATA taskfile 1525 * 1526 * Converts SCSI VERIFY command to an ATA READ VERIFY command. 1527 * 1528 * LOCKING: 1529 * spin_lock_irqsave(host lock) 1530 * 1531 * RETURNS: 1532 * Zero on success, non-zero on error. 1533 */ 1534static unsigned int ata_scsi_verify_xlat(struct ata_queued_cmd *qc) 1535{ 1536 struct scsi_cmnd *scmd = qc->scsicmd; 1537 struct ata_taskfile *tf = &qc->tf; 1538 struct ata_device *dev = qc->dev; 1539 u64 dev_sectors = qc->dev->n_sectors; 1540 const u8 *cdb = scmd->cmnd; 1541 u64 block; 1542 u32 n_block; 1543 1544 tf->flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; 1545 tf->protocol = ATA_PROT_NODATA; 1546 1547 if (cdb[0] == VERIFY) { 1548 if (scmd->cmd_len < 10) 1549 goto invalid_fld; 1550 scsi_10_lba_len(cdb, &block, &n_block); 1551 } else if (cdb[0] == VERIFY_16) { 1552 if (scmd->cmd_len < 16) 1553 goto invalid_fld; 1554 scsi_16_lba_len(cdb, &block, &n_block); 1555 } else 1556 goto invalid_fld; 1557 1558 if (!n_block) 1559 goto nothing_to_do; 1560 if (block >= dev_sectors) 1561 goto out_of_range; 1562 if ((block + n_block) > dev_sectors) 1563 goto out_of_range; 1564 1565 if (dev->flags & ATA_DFLAG_LBA) { 1566 tf->flags |= ATA_TFLAG_LBA; 1567 1568 if (lba_28_ok(block, n_block)) { 1569 /* use LBA28 */ 1570 tf->command = ATA_CMD_VERIFY; 1571 tf->device |= (block >> 24) & 0xf; 1572 } else if (lba_48_ok(block, n_block)) { 1573 if (!(dev->flags & ATA_DFLAG_LBA48)) 1574 goto out_of_range; 1575 1576 /* use LBA48 */ 1577 tf->flags |= ATA_TFLAG_LBA48; 1578 tf->command = ATA_CMD_VERIFY_EXT; 1579 1580 tf->hob_nsect = (n_block >> 8) & 0xff; 1581 1582 tf->hob_lbah = (block >> 40) & 0xff; 1583 tf->hob_lbam = (block >> 32) & 0xff; 1584 tf->hob_lbal = (block >> 24) & 0xff; 1585 } else 1586 /* request too large even for LBA48 */ 1587 goto out_of_range; 1588 1589 tf->nsect = n_block & 0xff; 1590 1591 tf->lbah = (block >> 16) & 0xff; 1592 tf->lbam = (block >> 8) & 0xff; 1593 tf->lbal = block & 0xff; 1594 1595 tf->device |= ATA_LBA; 1596 } else { 1597 /* CHS */ 1598 u32 sect, head, cyl, track; 1599 1600 if (!lba_28_ok(block, n_block)) 1601 goto out_of_range; 1602 1603 /* Convert LBA to CHS */ 1604 track = (u32)block / dev->sectors; 1605 cyl = track / dev->heads; 1606 head = track % dev->heads; 1607 sect = (u32)block % dev->sectors + 1; 1608 1609 DPRINTK("block %u track %u cyl %u head %u sect %u\n", 1610 (u32)block, track, cyl, head, sect); 1611 1612 /* Check whether the converted CHS can fit. 1613 Cylinder: 0-65535 1614 Head: 0-15 1615 Sector: 1-255*/ 1616 if ((cyl >> 16) || (head >> 4) || (sect >> 8) || (!sect)) 1617 goto out_of_range; 1618 1619 tf->command = ATA_CMD_VERIFY; 1620 tf->nsect = n_block & 0xff; /* Sector count 0 means 256 sectors */ 1621 tf->lbal = sect; 1622 tf->lbam = cyl; 1623 tf->lbah = cyl >> 8; 1624 tf->device |= head; 1625 } 1626 1627 return 0; 1628 1629invalid_fld: 1630 ata_scsi_set_sense(scmd, ILLEGAL_REQUEST, 0x24, 0x0); 1631 /* "Invalid field in cbd" */ 1632 return 1; 1633 1634out_of_range: 1635 ata_scsi_set_sense(scmd, ILLEGAL_REQUEST, 0x21, 0x0); 1636 /* "Logical Block Address out of range" */ 1637 return 1; 1638 1639nothing_to_do: 1640 scmd->result = SAM_STAT_GOOD; 1641 return 1; 1642} 1643 1644/** 1645 * ata_scsi_rw_xlat - Translate SCSI r/w command into an ATA one 1646 * @qc: Storage for translated ATA taskfile 1647 * 1648 * Converts any of six SCSI read/write commands into the 1649 * ATA counterpart, including starting sector (LBA), 1650 * sector count, and taking into account the device's LBA48 1651 * support. 1652 * 1653 * Commands %READ_6, %READ_10, %READ_16, %WRITE_6, %WRITE_10, and 1654 * %WRITE_16 are currently supported. 1655 * 1656 * LOCKING: 1657 * spin_lock_irqsave(host lock) 1658 * 1659 * RETURNS: 1660 * Zero on success, non-zero on error. 1661 */ 1662static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc) 1663{ 1664 struct scsi_cmnd *scmd = qc->scsicmd; 1665 const u8 *cdb = scmd->cmnd; 1666 unsigned int tf_flags = 0; 1667 u64 block; 1668 u32 n_block; 1669 int rc; 1670 1671 if (cdb[0] == WRITE_10 || cdb[0] == WRITE_6 || cdb[0] == WRITE_16) 1672 tf_flags |= ATA_TFLAG_WRITE; 1673 1674 /* Calculate the SCSI LBA, transfer length and FUA. */ 1675 switch (cdb[0]) { 1676 case READ_10: 1677 case WRITE_10: 1678 if (unlikely(scmd->cmd_len < 10)) 1679 goto invalid_fld; 1680 scsi_10_lba_len(cdb, &block, &n_block); 1681 if (cdb[1] & (1 << 3)) 1682 tf_flags |= ATA_TFLAG_FUA; 1683 break; 1684 case READ_6: 1685 case WRITE_6: 1686 if (unlikely(scmd->cmd_len < 6)) 1687 goto invalid_fld; 1688 scsi_6_lba_len(cdb, &block, &n_block); 1689 1690 /* for 6-byte r/w commands, transfer length 0 1691 * means 256 blocks of data, not 0 block. 1692 */ 1693 if (!n_block) 1694 n_block = 256; 1695 break; 1696 case READ_16: 1697 case WRITE_16: 1698 if (unlikely(scmd->cmd_len < 16)) 1699 goto invalid_fld; 1700 scsi_16_lba_len(cdb, &block, &n_block); 1701 if (cdb[1] & (1 << 3)) 1702 tf_flags |= ATA_TFLAG_FUA; 1703 break; 1704 default: 1705 DPRINTK("no-byte command\n"); 1706 goto invalid_fld; 1707 } 1708 1709 /* Check and compose ATA command */ 1710 if (!n_block) 1711 /* For 10-byte and 16-byte SCSI R/W commands, transfer 1712 * length 0 means transfer 0 block of data. 1713 * However, for ATA R/W commands, sector count 0 means 1714 * 256 or 65536 sectors, not 0 sectors as in SCSI. 1715 * 1716 * WARNING: one or two older ATA drives treat 0 as 0... 1717 */ 1718 goto nothing_to_do; 1719 1720 qc->flags |= ATA_QCFLAG_IO; 1721 qc->nbytes = n_block * scmd->device->sector_size; 1722 1723 rc = ata_build_rw_tf(&qc->tf, qc->dev, block, n_block, tf_flags, 1724 qc->tag); 1725 if (likely(rc == 0)) 1726 return 0; 1727 1728 if (rc == -ERANGE) 1729 goto out_of_range; 1730 /* treat all other errors as -EINVAL, fall through */ 1731invalid_fld: 1732 ata_scsi_set_sense(scmd, ILLEGAL_REQUEST, 0x24, 0x0); 1733 /* "Invalid field in cbd" */ 1734 return 1; 1735 1736out_of_range: 1737 ata_scsi_set_sense(scmd, ILLEGAL_REQUEST, 0x21, 0x0); 1738 /* "Logical Block Address out of range" */ 1739 return 1; 1740 1741nothing_to_do: 1742 scmd->result = SAM_STAT_GOOD; 1743 return 1; 1744} 1745 1746static void ata_scsi_qc_complete(struct ata_queued_cmd *qc) 1747{ 1748 struct ata_port *ap = qc->ap; 1749 struct scsi_cmnd *cmd = qc->scsicmd; 1750 u8 *cdb = cmd->cmnd; 1751 int need_sense = (qc->err_mask != 0); 1752 1753 /* For ATA pass thru (SAT) commands, generate a sense block if 1754 * user mandated it or if there's an error. Note that if we 1755 * generate because the user forced us to [CK_COND =1], a check 1756 * condition is generated and the ATA register values are returned 1757 * whether the command completed successfully or not. If there 1758 * was no error, we use the following sense data: 1759 * sk = RECOVERED ERROR 1760 * asc,ascq = ATA PASS-THROUGH INFORMATION AVAILABLE 1761 */ 1762 if (((cdb[0] == ATA_16) || (cdb[0] == ATA_12)) && 1763 ((cdb[2] & 0x20) || need_sense)) { 1764 ata_gen_passthru_sense(qc); 1765 } else { 1766 if (!need_sense) { 1767 cmd->result = SAM_STAT_GOOD; 1768 } else { 1769 /* TODO: decide which descriptor format to use 1770 * for 48b LBA devices and call that here 1771 * instead of the fixed desc, which is only 1772 * good for smaller LBA (and maybe CHS?) 1773 * devices. 1774 */ 1775 ata_gen_ata_sense(qc); 1776 } 1777 } 1778 1779 if (need_sense && !ap->ops->error_handler) 1780 ata_dump_status(ap->print_id, &qc->result_tf); 1781 1782 qc->scsidone(cmd); 1783 1784 ata_qc_free(qc); 1785} 1786 1787/** 1788 * ata_scsi_translate - Translate then issue SCSI command to ATA device 1789 * @dev: ATA device to which the command is addressed 1790 * @cmd: SCSI command to execute 1791 * @xlat_func: Actor which translates @cmd to an ATA taskfile 1792 * 1793 * Our ->queuecommand() function has decided that the SCSI 1794 * command issued can be directly translated into an ATA 1795 * command, rather than handled internally. 1796 * 1797 * This function sets up an ata_queued_cmd structure for the 1798 * SCSI command, and sends that ata_queued_cmd to the hardware. 1799 * 1800 * The xlat_func argument (actor) returns 0 if ready to execute 1801 * ATA command, else 1 to finish translation. If 1 is returned 1802 * then cmd->result (and possibly cmd->sense_buffer) are assumed 1803 * to be set reflecting an error condition or clean (early) 1804 * termination. 1805 * 1806 * LOCKING: 1807 * spin_lock_irqsave(host lock) 1808 * 1809 * RETURNS: 1810 * 0 on success, SCSI_ML_QUEUE_DEVICE_BUSY if the command 1811 * needs to be deferred. 1812 */ 1813static int ata_scsi_translate(struct ata_device *dev, struct scsi_cmnd *cmd, 1814 ata_xlat_func_t xlat_func) 1815{ 1816 struct ata_port *ap = dev->link->ap; 1817 struct ata_queued_cmd *qc; 1818 int rc; 1819 1820 VPRINTK("ENTER\n"); 1821 1822 qc = ata_scsi_qc_new(dev, cmd); 1823 if (!qc) 1824 goto err_mem; 1825 1826 /* data is present; dma-map it */ 1827 if (cmd->sc_data_direction == DMA_FROM_DEVICE || 1828 cmd->sc_data_direction == DMA_TO_DEVICE) { 1829 if (unlikely(scsi_bufflen(cmd) < 1)) { 1830 ata_dev_warn(dev, "WARNING: zero len r/w req\n"); 1831 goto err_did; 1832 } 1833 1834 ata_sg_init(qc, scsi_sglist(cmd), scsi_sg_count(cmd)); 1835 1836 qc->dma_dir = cmd->sc_data_direction; 1837 } 1838 1839 qc->complete_fn = ata_scsi_qc_complete; 1840 1841 if (xlat_func(qc)) 1842 goto early_finish; 1843 1844 if (ap->ops->qc_defer) { 1845 if ((rc = ap->ops->qc_defer(qc))) 1846 goto defer; 1847 } 1848 1849 /* select device, send command to hardware */ 1850 ata_qc_issue(qc); 1851 1852 VPRINTK("EXIT\n"); 1853 return 0; 1854 1855early_finish: 1856 ata_qc_free(qc); 1857 cmd->scsi_done(cmd); 1858 DPRINTK("EXIT - early finish (good or error)\n"); 1859 return 0; 1860 1861err_did: 1862 ata_qc_free(qc); 1863 cmd->result = (DID_ERROR << 16); 1864 cmd->scsi_done(cmd); 1865err_mem: 1866 DPRINTK("EXIT - internal\n"); 1867 return 0; 1868 1869defer: 1870 ata_qc_free(qc); 1871 DPRINTK("EXIT - defer\n"); 1872 if (rc == ATA_DEFER_LINK) 1873 return SCSI_MLQUEUE_DEVICE_BUSY; 1874 else 1875 return SCSI_MLQUEUE_HOST_BUSY; 1876} 1877 1878/** 1879 * ata_scsi_rbuf_get - Map response buffer. 1880 * @cmd: SCSI command containing buffer to be mapped. 1881 * @flags: unsigned long variable to store irq enable status 1882 * @copy_in: copy in from user buffer 1883 * 1884 * Prepare buffer for simulated SCSI commands. 1885 * 1886 * LOCKING: 1887 * spin_lock_irqsave(ata_scsi_rbuf_lock) on success 1888 * 1889 * RETURNS: 1890 * Pointer to response buffer. 1891 */ 1892static void *ata_scsi_rbuf_get(struct scsi_cmnd *cmd, bool copy_in, 1893 unsigned long *flags) 1894{ 1895 spin_lock_irqsave(&ata_scsi_rbuf_lock, *flags); 1896 1897 memset(ata_scsi_rbuf, 0, ATA_SCSI_RBUF_SIZE); 1898 if (copy_in) 1899 sg_copy_to_buffer(scsi_sglist(cmd), scsi_sg_count(cmd), 1900 ata_scsi_rbuf, ATA_SCSI_RBUF_SIZE); 1901 return ata_scsi_rbuf; 1902} 1903 1904/** 1905 * ata_scsi_rbuf_put - Unmap response buffer. 1906 * @cmd: SCSI command containing buffer to be unmapped. 1907 * @copy_out: copy out result 1908 * @flags: @flags passed to ata_scsi_rbuf_get() 1909 * 1910 * Returns rbuf buffer. The result is copied to @cmd's buffer if 1911 * @copy_back is true. 1912 * 1913 * LOCKING: 1914 * Unlocks ata_scsi_rbuf_lock. 1915 */ 1916static inline void ata_scsi_rbuf_put(struct scsi_cmnd *cmd, bool copy_out, 1917 unsigned long *flags) 1918{ 1919 if (copy_out) 1920 sg_copy_from_buffer(scsi_sglist(cmd), scsi_sg_count(cmd), 1921 ata_scsi_rbuf, ATA_SCSI_RBUF_SIZE); 1922 spin_unlock_irqrestore(&ata_scsi_rbuf_lock, *flags); 1923} 1924 1925/** 1926 * ata_scsi_rbuf_fill - wrapper for SCSI command simulators 1927 * @args: device IDENTIFY data / SCSI command of interest. 1928 * @actor: Callback hook for desired SCSI command simulator 1929 * 1930 * Takes care of the hard work of simulating a SCSI command... 1931 * Mapping the response buffer, calling the command's handler, 1932 * and handling the handler's return value. This return value 1933 * indicates whether the handler wishes the SCSI command to be 1934 * completed successfully (0), or not (in which case cmd->result 1935 * and sense buffer are assumed to be set). 1936 * 1937 * LOCKING: 1938 * spin_lock_irqsave(host lock) 1939 */ 1940static void ata_scsi_rbuf_fill(struct ata_scsi_args *args, 1941 unsigned int (*actor)(struct ata_scsi_args *args, u8 *rbuf)) 1942{ 1943 u8 *rbuf; 1944 unsigned int rc; 1945 struct scsi_cmnd *cmd = args->cmd; 1946 unsigned long flags; 1947 1948 rbuf = ata_scsi_rbuf_get(cmd, false, &flags); 1949 rc = actor(args, rbuf); 1950 ata_scsi_rbuf_put(cmd, rc == 0, &flags); 1951 1952 if (rc == 0) 1953 cmd->result = SAM_STAT_GOOD; 1954 args->done(cmd); 1955} 1956 1957/** 1958 * ata_scsiop_inq_std - Simulate INQUIRY command 1959 * @args: device IDENTIFY data / SCSI command of interest. 1960 * @rbuf: Response buffer, to which simulated SCSI cmd output is sent. 1961 * 1962 * Returns standard device identification data associated 1963 * with non-VPD INQUIRY command output. 1964 * 1965 * LOCKING: 1966 * spin_lock_irqsave(host lock) 1967 */ 1968static unsigned int ata_scsiop_inq_std(struct ata_scsi_args *args, u8 *rbuf) 1969{ 1970 const u8 versions[] = { 1971 0x60, /* SAM-3 (no version claimed) */ 1972 1973 0x03, 1974 0x20, /* SBC-2 (no version claimed) */ 1975 1976 0x02, 1977 0x60 /* SPC-3 (no version claimed) */ 1978 }; 1979 u8 hdr[] = { 1980 TYPE_DISK, 1981 0, 1982 0x5, /* claim SPC-3 version compatibility */ 1983 2, 1984 95 - 4 1985 }; 1986 1987 VPRINTK("ENTER\n"); 1988 1989 /* set scsi removeable (RMB) bit per ata bit */ 1990 if (ata_id_removeable(args->id)) 1991 hdr[1] |= (1 << 7); 1992 1993 memcpy(rbuf, hdr, sizeof(hdr)); 1994 memcpy(&rbuf[8], "ATA ", 8); 1995 ata_id_string(args->id, &rbuf[16], ATA_ID_PROD, 16); 1996 1997 /* From SAT, use last 2 words from fw rev unless they are spaces */ 1998 ata_id_string(args->id, &rbuf[32], ATA_ID_FW_REV + 2, 4); 1999 if (strncmp(&rbuf[32], " ", 4) == 0) 2000 ata_id_string(args->id, &rbuf[32], ATA_ID_FW_REV, 4); 2001 2002 if (rbuf[32] == 0 || rbuf[32] == ' ') 2003 memcpy(&rbuf[32], "n/a ", 4); 2004 2005 memcpy(rbuf + 59, versions, sizeof(versions)); 2006 2007 return 0; 2008} 2009 2010/** 2011 * ata_scsiop_inq_00 - Simulate INQUIRY VPD page 0, list of pages 2012 * @args: device IDENTIFY data / SCSI command of interest. 2013 * @rbuf: Response buffer, to which simulated SCSI cmd output is sent. 2014 * 2015 * Returns list of inquiry VPD pages available. 2016 * 2017 * LOCKING: 2018 * spin_lock_irqsave(host lock) 2019 */ 2020static unsigned int ata_scsiop_inq_00(struct ata_scsi_args *args, u8 *rbuf) 2021{ 2022 const u8 pages[] = { 2023 0x00, /* page 0x00, this page */ 2024 0x80, /* page 0x80, unit serial no page */ 2025 0x83, /* page 0x83, device ident page */ 2026 0x89, /* page 0x89, ata info page */ 2027 0xb0, /* page 0xb0, block limits page */ 2028 0xb1, /* page 0xb1, block device characteristics page */ 2029 0xb2, /* page 0xb2, thin provisioning page */ 2030 }; 2031 2032 rbuf[3] = sizeof(pages); /* number of supported VPD pages */ 2033 memcpy(rbuf + 4, pages, sizeof(pages)); 2034 return 0; 2035} 2036 2037/** 2038 * ata_scsiop_inq_80 - Simulate INQUIRY VPD page 80, device serial number 2039 * @args: device IDENTIFY data / SCSI command of interest. 2040 * @rbuf: Response buffer, to which simulated SCSI cmd output is sent. 2041 * 2042 * Returns ATA device serial number. 2043 * 2044 * LOCKING: 2045 * spin_lock_irqsave(host lock) 2046 */ 2047static unsigned int ata_scsiop_inq_80(struct ata_scsi_args *args, u8 *rbuf) 2048{ 2049 const u8 hdr[] = { 2050 0, 2051 0x80, /* this page code */ 2052 0, 2053 ATA_ID_SERNO_LEN, /* page len */ 2054 }; 2055 2056 memcpy(rbuf, hdr, sizeof(hdr)); 2057 ata_id_string(args->id, (unsigned char *) &rbuf[4], 2058 ATA_ID_SERNO, ATA_ID_SERNO_LEN); 2059 return 0; 2060} 2061 2062/** 2063 * ata_scsiop_inq_83 - Simulate INQUIRY VPD page 83, device identity 2064 * @args: device IDENTIFY data / SCSI command of interest. 2065 * @rbuf: Response buffer, to which simulated SCSI cmd output is sent. 2066 * 2067 * Yields two logical unit device identification designators: 2068 * - vendor specific ASCII containing the ATA serial number 2069 * - SAT defined "t10 vendor id based" containing ASCII vendor 2070 * name ("ATA "), model and serial numbers. 2071 * 2072 * LOCKING: 2073 * spin_lock_irqsave(host lock) 2074 */ 2075static unsigned int ata_scsiop_inq_83(struct ata_scsi_args *args, u8 *rbuf) 2076{ 2077 const int sat_model_serial_desc_len = 68; 2078 int num; 2079 2080 rbuf[1] = 0x83; /* this page code */ 2081 num = 4; 2082 2083 /* piv=0, assoc=lu, code_set=ACSII, designator=vendor */ 2084 rbuf[num + 0] = 2; 2085 rbuf[num + 3] = ATA_ID_SERNO_LEN; 2086 num += 4; 2087 ata_id_string(args->id, (unsigned char *) rbuf + num, 2088 ATA_ID_SERNO, ATA_ID_SERNO_LEN); 2089 num += ATA_ID_SERNO_LEN; 2090 2091 /* SAT defined lu model and serial numbers descriptor */ 2092 /* piv=0, assoc=lu, code_set=ACSII, designator=t10 vendor id */ 2093 rbuf[num + 0] = 2; 2094 rbuf[num + 1] = 1; 2095 rbuf[num + 3] = sat_model_serial_desc_len; 2096 num += 4; 2097 memcpy(rbuf + num, "ATA ", 8); 2098 num += 8; 2099 ata_id_string(args->id, (unsigned char *) rbuf + num, ATA_ID_PROD, 2100 ATA_ID_PROD_LEN); 2101 num += ATA_ID_PROD_LEN; 2102 ata_id_string(args->id, (unsigned char *) rbuf + num, ATA_ID_SERNO, 2103 ATA_ID_SERNO_LEN); 2104 num += ATA_ID_SERNO_LEN; 2105 2106 if (ata_id_has_wwn(args->id)) { 2107 /* SAT defined lu world wide name */ 2108 /* piv=0, assoc=lu, code_set=binary, designator=NAA */ 2109 rbuf[num + 0] = 1; 2110 rbuf[num + 1] = 3; 2111 rbuf[num + 3] = ATA_ID_WWN_LEN; 2112 num += 4; 2113 ata_id_string(args->id, (unsigned char *) rbuf + num, 2114 ATA_ID_WWN, ATA_ID_WWN_LEN); 2115 num += ATA_ID_WWN_LEN; 2116 } 2117 rbuf[3] = num - 4; /* page len (assume less than 256 bytes) */ 2118 return 0; 2119} 2120 2121/** 2122 * ata_scsiop_inq_89 - Simulate INQUIRY VPD page 89, ATA info 2123 * @args: device IDENTIFY data / SCSI command of interest. 2124 * @rbuf: Response buffer, to which simulated SCSI cmd output is sent. 2125 * 2126 * Yields SAT-specified ATA VPD page. 2127 * 2128 * LOCKING: 2129 * spin_lock_irqsave(host lock) 2130 */ 2131static unsigned int ata_scsiop_inq_89(struct ata_scsi_args *args, u8 *rbuf) 2132{ 2133 struct ata_taskfile tf; 2134 2135 memset(&tf, 0, sizeof(tf)); 2136 2137 rbuf[1] = 0x89; /* our page code */ 2138 rbuf[2] = (0x238 >> 8); /* page size fixed at 238h */ 2139 rbuf[3] = (0x238 & 0xff); 2140 2141 memcpy(&rbuf[8], "linux ", 8); 2142 memcpy(&rbuf[16], "libata ", 16); 2143 memcpy(&rbuf[32], DRV_VERSION, 4); 2144 2145 /* we don't store the ATA device signature, so we fake it */ 2146 2147 tf.command = ATA_DRDY; /* really, this is Status reg */ 2148 tf.lbal = 0x1; 2149 tf.nsect = 0x1; 2150 2151 ata_tf_to_fis(&tf, 0, 1, &rbuf[36]); /* TODO: PMP? */ 2152 rbuf[36] = 0x34; /* force D2H Reg FIS (34h) */ 2153 2154 rbuf[56] = ATA_CMD_ID_ATA; 2155 2156 memcpy(&rbuf[60], &args->id[0], 512); 2157 return 0; 2158} 2159 2160static unsigned int ata_scsiop_inq_b0(struct ata_scsi_args *args, u8 *rbuf) 2161{ 2162 u16 min_io_sectors; 2163 2164 rbuf[1] = 0xb0; 2165 rbuf[3] = 0x3c; /* required VPD size with unmap support */ 2166 2167 /* 2168 * Optimal transfer length granularity. 2169 * 2170 * This is always one physical block, but for disks with a smaller 2171 * logical than physical sector size we need to figure out what the 2172 * latter is. 2173 */ 2174 min_io_sectors = 1 << ata_id_log2_per_physical_sector(args->id); 2175 put_unaligned_be16(min_io_sectors, &rbuf[6]); 2176 2177 /* 2178 * Optimal unmap granularity. 2179 * 2180 * The ATA spec doesn't even know about a granularity or alignment 2181 * for the TRIM command. We can leave away most of the unmap related 2182 * VPD page entries, but we have specifify a granularity to signal 2183 * that we support some form of unmap - in thise case via WRITE SAME 2184 * with the unmap bit set. 2185 */ 2186 if (ata_id_has_trim(args->id)) { 2187 put_unaligned_be64(65535 * 512 / 8, &rbuf[36]); 2188 put_unaligned_be32(1, &rbuf[28]); 2189 } 2190 2191 return 0; 2192} 2193 2194static unsigned int ata_scsiop_inq_b1(struct ata_scsi_args *args, u8 *rbuf) 2195{ 2196 int form_factor = ata_id_form_factor(args->id); 2197 int media_rotation_rate = ata_id_rotation_rate(args->id); 2198 2199 rbuf[1] = 0xb1; 2200 rbuf[3] = 0x3c; 2201 rbuf[4] = media_rotation_rate >> 8; 2202 rbuf[5] = media_rotation_rate; 2203 rbuf[7] = form_factor; 2204 2205 return 0; 2206} 2207 2208static unsigned int ata_scsiop_inq_b2(struct ata_scsi_args *args, u8 *rbuf) 2209{ 2210 /* SCSI Thin Provisioning VPD page: SBC-3 rev 22 or later */ 2211 rbuf[1] = 0xb2; 2212 rbuf[3] = 0x4; 2213 rbuf[5] = 1 << 6; /* TPWS */ 2214 2215 return 0; 2216} 2217 2218/** 2219 * ata_scsiop_noop - Command handler that simply returns success. 2220 * @args: device IDENTIFY data / SCSI command of interest. 2221 * @rbuf: Response buffer, to which simulated SCSI cmd output is sent. 2222 * 2223 * No operation. Simply returns success to caller, to indicate 2224 * that the caller should successfully complete this SCSI command. 2225 * 2226 * LOCKING: 2227 * spin_lock_irqsave(host lock) 2228 */ 2229static unsigned int ata_scsiop_noop(struct ata_scsi_args *args, u8 *rbuf) 2230{ 2231 VPRINTK("ENTER\n"); 2232 return 0; 2233} 2234 2235/** 2236 * modecpy - Prepare response for MODE SENSE 2237 * @dest: output buffer 2238 * @src: data being copied 2239 * @n: length of mode page 2240 * @changeable: whether changeable parameters are requested 2241 * 2242 * Generate a generic MODE SENSE page for either current or changeable 2243 * parameters. 2244 * 2245 * LOCKING: 2246 * None. 2247 */ 2248static void modecpy(u8 *dest, const u8 *src, int n, bool changeable) 2249{ 2250 if (changeable) { 2251 memcpy(dest, src, 2); 2252 memset(dest + 2, 0, n - 2); 2253 } else { 2254 memcpy(dest, src, n); 2255 } 2256} 2257 2258/** 2259 * ata_msense_caching - Simulate MODE SENSE caching info page 2260 * @id: device IDENTIFY data 2261 * @buf: output buffer 2262 * @changeable: whether changeable parameters are requested 2263 * 2264 * Generate a caching info page, which conditionally indicates 2265 * write caching to the SCSI layer, depending on device 2266 * capabilities. 2267 * 2268 * LOCKING: 2269 * None. 2270 */ 2271static unsigned int ata_msense_caching(u16 *id, u8 *buf, bool changeable) 2272{ 2273 modecpy(buf, def_cache_mpage, sizeof(def_cache_mpage), changeable); 2274 if (changeable || ata_id_wcache_enabled(id)) 2275 buf[2] |= (1 << 2); /* write cache enable */ 2276 if (!changeable && !ata_id_rahead_enabled(id)) 2277 buf[12] |= (1 << 5); /* disable read ahead */ 2278 return sizeof(def_cache_mpage); 2279} 2280 2281/** 2282 * ata_msense_ctl_mode - Simulate MODE SENSE control mode page 2283 * @buf: output buffer 2284 * @changeable: whether changeable parameters are requested 2285 * 2286 * Generate a generic MODE SENSE control mode page. 2287 * 2288 * LOCKING: 2289 * None. 2290 */ 2291static unsigned int ata_msense_ctl_mode(u8 *buf, bool changeable) 2292{ 2293 modecpy(buf, def_control_mpage, sizeof(def_control_mpage), changeable); 2294 return sizeof(def_control_mpage); 2295} 2296 2297/** 2298 * ata_msense_rw_recovery - Simulate MODE SENSE r/w error recovery page 2299 * @buf: output buffer 2300 * @changeable: whether changeable parameters are requested 2301 * 2302 * Generate a generic MODE SENSE r/w error recovery page. 2303 * 2304 * LOCKING: 2305 * None. 2306 */ 2307static unsigned int ata_msense_rw_recovery(u8 *buf, bool changeable) 2308{ 2309 modecpy(buf, def_rw_recovery_mpage, sizeof(def_rw_recovery_mpage), 2310 changeable); 2311 return sizeof(def_rw_recovery_mpage); 2312} 2313 2314/* 2315 * We can turn this into a real blacklist if it's needed, for now just 2316 * blacklist any Maxtor BANC1G10 revision firmware 2317 */ 2318static int ata_dev_supports_fua(u16 *id) 2319{ 2320 unsigned char model[ATA_ID_PROD_LEN + 1], fw[ATA_ID_FW_REV_LEN + 1]; 2321 2322 if (!libata_fua) 2323 return 0; 2324 if (!ata_id_has_fua(id)) 2325 return 0; 2326 2327 ata_id_c_string(id, model, ATA_ID_PROD, sizeof(model)); 2328 ata_id_c_string(id, fw, ATA_ID_FW_REV, sizeof(fw)); 2329 2330 if (strcmp(model, "Maxtor")) 2331 return 1; 2332 if (strcmp(fw, "BANC1G10")) 2333 return 1; 2334 2335 return 0; /* blacklisted */ 2336} 2337 2338/** 2339 * ata_scsiop_mode_sense - Simulate MODE SENSE 6, 10 commands 2340 * @args: device IDENTIFY data / SCSI command of interest. 2341 * @rbuf: Response buffer, to which simulated SCSI cmd output is sent. 2342 * 2343 * Simulate MODE SENSE commands. Assume this is invoked for direct 2344 * access devices (e.g. disks) only. There should be no block 2345 * descriptor for other device types. 2346 * 2347 * LOCKING: 2348 * spin_lock_irqsave(host lock) 2349 */ 2350static unsigned int ata_scsiop_mode_sense(struct ata_scsi_args *args, u8 *rbuf) 2351{ 2352 struct ata_device *dev = args->dev; 2353 u8 *scsicmd = args->cmd->cmnd, *p = rbuf; 2354 const u8 sat_blk_desc[] = { 2355 0, 0, 0, 0, /* number of blocks: sat unspecified */ 2356 0, 2357 0, 0x2, 0x0 /* block length: 512 bytes */ 2358 }; 2359 u8 pg, spg; 2360 unsigned int ebd, page_control, six_byte; 2361 u8 dpofua; 2362 2363 VPRINTK("ENTER\n"); 2364 2365 six_byte = (scsicmd[0] == MODE_SENSE); 2366 ebd = !(scsicmd[1] & 0x8); /* dbd bit inverted == edb */ 2367 /* 2368 * LLBA bit in msense(10) ignored (compliant) 2369 */ 2370 2371 page_control = scsicmd[2] >> 6; 2372 switch (page_control) { 2373 case 0: /* current */ 2374 case 1: /* changeable */ 2375 case 2: /* defaults */ 2376 break; /* supported */ 2377 case 3: /* saved */ 2378 goto saving_not_supp; 2379 default: 2380 goto invalid_fld; 2381 } 2382 2383 if (six_byte) 2384 p += 4 + (ebd ? 8 : 0); 2385 else 2386 p += 8 + (ebd ? 8 : 0); 2387 2388 pg = scsicmd[2] & 0x3f; 2389 spg = scsicmd[3]; 2390 /* 2391 * No mode subpages supported (yet) but asking for _all_ 2392 * subpages may be valid 2393 */ 2394 if (spg && (spg != ALL_SUB_MPAGES)) 2395 goto invalid_fld; 2396 2397 switch(pg) { 2398 case RW_RECOVERY_MPAGE: 2399 p += ata_msense_rw_recovery(p, page_control == 1); 2400 break; 2401 2402 case CACHE_MPAGE: 2403 p += ata_msense_caching(args->id, p, page_control == 1); 2404 break; 2405 2406 case CONTROL_MPAGE: 2407 p += ata_msense_ctl_mode(p, page_control == 1); 2408 break; 2409 2410 case ALL_MPAGES: 2411 p += ata_msense_rw_recovery(p, page_control == 1); 2412 p += ata_msense_caching(args->id, p, page_control == 1); 2413 p += ata_msense_ctl_mode(p, page_control == 1); 2414 break; 2415 2416 default: /* invalid page code */ 2417 goto invalid_fld; 2418 } 2419 2420 dpofua = 0; 2421 if (ata_dev_supports_fua(args->id) && (dev->flags & ATA_DFLAG_LBA48) && 2422 (!(dev->flags & ATA_DFLAG_PIO) || dev->multi_count)) 2423 dpofua = 1 << 4; 2424 2425 if (six_byte) { 2426 rbuf[0] = p - rbuf - 1; 2427 rbuf[2] |= dpofua; 2428 if (ebd) { 2429 rbuf[3] = sizeof(sat_blk_desc); 2430 memcpy(rbuf + 4, sat_blk_desc, sizeof(sat_blk_desc)); 2431 } 2432 } else { 2433 unsigned int output_len = p - rbuf - 2; 2434 2435 rbuf[0] = output_len >> 8; 2436 rbuf[1] = output_len; 2437 rbuf[3] |= dpofua; 2438 if (ebd) { 2439 rbuf[7] = sizeof(sat_blk_desc); 2440 memcpy(rbuf + 8, sat_blk_desc, sizeof(sat_blk_desc)); 2441 } 2442 } 2443 return 0; 2444 2445invalid_fld: 2446 ata_scsi_set_sense(args->cmd, ILLEGAL_REQUEST, 0x24, 0x0); 2447 /* "Invalid field in cbd" */ 2448 return 1; 2449 2450saving_not_supp: 2451 ata_scsi_set_sense(args->cmd, ILLEGAL_REQUEST, 0x39, 0x0); 2452 /* "Saving parameters not supported" */ 2453 return 1; 2454} 2455 2456/** 2457 * ata_scsiop_read_cap - Simulate READ CAPACITY[ 16] commands 2458 * @args: device IDENTIFY data / SCSI command of interest. 2459 * @rbuf: Response buffer, to which simulated SCSI cmd output is sent. 2460 * 2461 * Simulate READ CAPACITY commands. 2462 * 2463 * LOCKING: 2464 * None. 2465 */ 2466static unsigned int ata_scsiop_read_cap(struct ata_scsi_args *args, u8 *rbuf) 2467{ 2468 struct ata_device *dev = args->dev; 2469 u64 last_lba = dev->n_sectors - 1; /* LBA of the last block */ 2470 u32 sector_size; /* physical sector size in bytes */ 2471 u8 log2_per_phys; 2472 u16 lowest_aligned; 2473 2474 sector_size = ata_id_logical_sector_size(dev->id); 2475 log2_per_phys = ata_id_log2_per_physical_sector(dev->id); 2476 lowest_aligned = ata_id_logical_sector_offset(dev->id, log2_per_phys); 2477 2478 VPRINTK("ENTER\n"); 2479 2480 if (args->cmd->cmnd[0] == READ_CAPACITY) { 2481 if (last_lba >= 0xffffffffULL) 2482 last_lba = 0xffffffff; 2483 2484 /* sector count, 32-bit */ 2485 rbuf[0] = last_lba >> (8 * 3); 2486 rbuf[1] = last_lba >> (8 * 2); 2487 rbuf[2] = last_lba >> (8 * 1); 2488 rbuf[3] = last_lba; 2489 2490 /* sector size */ 2491 rbuf[4] = sector_size >> (8 * 3); 2492 rbuf[5] = sector_size >> (8 * 2); 2493 rbuf[6] = sector_size >> (8 * 1); 2494 rbuf[7] = sector_size; 2495 } else { 2496 /* sector count, 64-bit */ 2497 rbuf[0] = last_lba >> (8 * 7); 2498 rbuf[1] = last_lba >> (8 * 6); 2499 rbuf[2] = last_lba >> (8 * 5); 2500 rbuf[3] = last_lba >> (8 * 4); 2501 rbuf[4] = last_lba >> (8 * 3); 2502 rbuf[5] = last_lba >> (8 * 2); 2503 rbuf[6] = last_lba >> (8 * 1); 2504 rbuf[7] = last_lba; 2505 2506 /* sector size */ 2507 rbuf[ 8] = sector_size >> (8 * 3); 2508 rbuf[ 9] = sector_size >> (8 * 2); 2509 rbuf[10] = sector_size >> (8 * 1); 2510 rbuf[11] = sector_size; 2511 2512 rbuf[12] = 0; 2513 rbuf[13] = log2_per_phys; 2514 rbuf[14] = (lowest_aligned >> 8) & 0x3f; 2515 rbuf[15] = lowest_aligned; 2516 2517 if (ata_id_has_trim(args->id)) { 2518 rbuf[14] |= 0x80; /* TPE */ 2519 2520 if (ata_id_has_zero_after_trim(args->id)) 2521 rbuf[14] |= 0x40; /* TPRZ */ 2522 } 2523 } 2524 2525 return 0; 2526} 2527 2528/** 2529 * ata_scsiop_report_luns - Simulate REPORT LUNS command 2530 * @args: device IDENTIFY data / SCSI command of interest. 2531 * @rbuf: Response buffer, to which simulated SCSI cmd output is sent. 2532 * 2533 * Simulate REPORT LUNS command. 2534 * 2535 * LOCKING: 2536 * spin_lock_irqsave(host lock) 2537 */ 2538static unsigned int ata_scsiop_report_luns(struct ata_scsi_args *args, u8 *rbuf) 2539{ 2540 VPRINTK("ENTER\n"); 2541 rbuf[3] = 8; /* just one lun, LUN 0, size 8 bytes */ 2542 2543 return 0; 2544} 2545 2546static void atapi_sense_complete(struct ata_queued_cmd *qc) 2547{ 2548 if (qc->err_mask && ((qc->err_mask & AC_ERR_DEV) == 0)) { 2549 /* FIXME: not quite right; we don't want the 2550 * translation of taskfile registers into 2551 * a sense descriptors, since that's only 2552 * correct for ATA, not ATAPI 2553 */ 2554 ata_gen_passthru_sense(qc); 2555 } 2556 2557 qc->scsidone(qc->scsicmd); 2558 ata_qc_free(qc); 2559} 2560 2561/* is it pointless to prefer PIO for "safety reasons"? */ 2562static inline int ata_pio_use_silly(struct ata_port *ap) 2563{ 2564 return (ap->flags & ATA_FLAG_PIO_DMA); 2565} 2566 2567static void atapi_request_sense(struct ata_queued_cmd *qc) 2568{ 2569 struct ata_port *ap = qc->ap; 2570 struct scsi_cmnd *cmd = qc->scsicmd; 2571 2572 DPRINTK("ATAPI request sense\n"); 2573 2574 /* FIXME: is this needed? */ 2575 memset(cmd->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE); 2576 2577#ifdef CONFIG_ATA_SFF 2578 if (ap->ops->sff_tf_read) 2579 ap->ops->sff_tf_read(ap, &qc->tf); 2580#endif 2581 2582 /* fill these in, for the case where they are -not- overwritten */ 2583 cmd->sense_buffer[0] = 0x70; 2584 cmd->sense_buffer[2] = qc->tf.feature >> 4; 2585 2586 ata_qc_reinit(qc); 2587 2588 /* setup sg table and init transfer direction */ 2589 sg_init_one(&qc->sgent, cmd->sense_buffer, SCSI_SENSE_BUFFERSIZE); 2590 ata_sg_init(qc, &qc->sgent, 1); 2591 qc->dma_dir = DMA_FROM_DEVICE; 2592 2593 memset(&qc->cdb, 0, qc->dev->cdb_len); 2594 qc->cdb[0] = REQUEST_SENSE; 2595 qc->cdb[4] = SCSI_SENSE_BUFFERSIZE; 2596 2597 qc->tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; 2598 qc->tf.command = ATA_CMD_PACKET; 2599 2600 if (ata_pio_use_silly(ap)) { 2601 qc->tf.protocol = ATAPI_PROT_DMA; 2602 qc->tf.feature |= ATAPI_PKT_DMA; 2603 } else { 2604 qc->tf.protocol = ATAPI_PROT_PIO; 2605 qc->tf.lbam = SCSI_SENSE_BUFFERSIZE; 2606 qc->tf.lbah = 0; 2607 } 2608 qc->nbytes = SCSI_SENSE_BUFFERSIZE; 2609 2610 qc->complete_fn = atapi_sense_complete; 2611 2612 ata_qc_issue(qc); 2613 2614 DPRINTK("EXIT\n"); 2615} 2616 2617static void atapi_qc_complete(struct ata_queued_cmd *qc) 2618{ 2619 struct scsi_cmnd *cmd = qc->scsicmd; 2620 unsigned int err_mask = qc->err_mask; 2621 2622 VPRINTK("ENTER, err_mask 0x%X\n", err_mask); 2623 2624 /* handle completion from new EH */ 2625 if (unlikely(qc->ap->ops->error_handler && 2626 (err_mask || qc->flags & ATA_QCFLAG_SENSE_VALID))) { 2627 2628 if (!(qc->flags & ATA_QCFLAG_SENSE_VALID)) { 2629 /* FIXME: not quite right; we don't want the 2630 * translation of taskfile registers into a 2631 * sense descriptors, since that's only 2632 * correct for ATA, not ATAPI 2633 */ 2634 ata_gen_passthru_sense(qc); 2635 } 2636 2637 /* SCSI EH automatically locks door if sdev->locked is 2638 * set. Sometimes door lock request continues to 2639 * fail, for example, when no media is present. This 2640 * creates a loop - SCSI EH issues door lock which 2641 * fails and gets invoked again to acquire sense data 2642 * for the failed command. 2643 * 2644 * If door lock fails, always clear sdev->locked to 2645 * avoid this infinite loop. 2646 * 2647 * This may happen before SCSI scan is complete. Make 2648 * sure qc->dev->sdev isn't NULL before dereferencing. 2649 */ 2650 if (qc->cdb[0] == ALLOW_MEDIUM_REMOVAL && qc->dev->sdev) 2651 qc->dev->sdev->locked = 0; 2652 2653 qc->scsicmd->result = SAM_STAT_CHECK_CONDITION; 2654 qc->scsidone(cmd); 2655 ata_qc_free(qc); 2656 return; 2657 } 2658 2659 /* successful completion or old EH failure path */ 2660 if (unlikely(err_mask & AC_ERR_DEV)) { 2661 cmd->result = SAM_STAT_CHECK_CONDITION; 2662 atapi_request_sense(qc); 2663 return; 2664 } else if (unlikely(err_mask)) { 2665 /* FIXME: not quite right; we don't want the 2666 * translation of taskfile registers into 2667 * a sense descriptors, since that's only 2668 * correct for ATA, not ATAPI 2669 */ 2670 ata_gen_passthru_sense(qc); 2671 } else { 2672 u8 *scsicmd = cmd->cmnd; 2673 2674 if ((scsicmd[0] == INQUIRY) && ((scsicmd[1] & 0x03) == 0)) { 2675 unsigned long flags; 2676 u8 *buf; 2677 2678 buf = ata_scsi_rbuf_get(cmd, true, &flags); 2679 2680 /* ATAPI devices typically report zero for their SCSI version, 2681 * and sometimes deviate from the spec WRT response data 2682 * format. If SCSI version is reported as zero like normal, 2683 * then we make the following fixups: 1) Fake MMC-5 version, 2684 * to indicate to the Linux scsi midlayer this is a modern 2685 * device. 2) Ensure response data format / ATAPI information 2686 * are always correct. 2687 */ 2688 if (buf[2] == 0) { 2689 buf[2] = 0x5; 2690 buf[3] = 0x32; 2691 } 2692 2693 ata_scsi_rbuf_put(cmd, true, &flags); 2694 } 2695 2696 cmd->result = SAM_STAT_GOOD; 2697 } 2698 2699 qc->scsidone(cmd); 2700 ata_qc_free(qc); 2701} 2702/** 2703 * atapi_xlat - Initialize PACKET taskfile 2704 * @qc: command structure to be initialized 2705 * 2706 * LOCKING: 2707 * spin_lock_irqsave(host lock) 2708 * 2709 * RETURNS: 2710 * Zero on success, non-zero on failure. 2711 */ 2712static unsigned int atapi_xlat(struct ata_queued_cmd *qc) 2713{ 2714 struct scsi_cmnd *scmd = qc->scsicmd; 2715 struct ata_device *dev = qc->dev; 2716 int nodata = (scmd->sc_data_direction == DMA_NONE); 2717 int using_pio = !nodata && (dev->flags & ATA_DFLAG_PIO); 2718 unsigned int nbytes; 2719 2720 memset(qc->cdb, 0, dev->cdb_len); 2721 memcpy(qc->cdb, scmd->cmnd, scmd->cmd_len); 2722 2723 qc->complete_fn = atapi_qc_complete; 2724 2725 qc->tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; 2726 if (scmd->sc_data_direction == DMA_TO_DEVICE) { 2727 qc->tf.flags |= ATA_TFLAG_WRITE; 2728 DPRINTK("direction: write\n"); 2729 } 2730 2731 qc->tf.command = ATA_CMD_PACKET; 2732 ata_qc_set_pc_nbytes(qc); 2733 2734 /* check whether ATAPI DMA is safe */ 2735 if (!nodata && !using_pio && atapi_check_dma(qc)) 2736 using_pio = 1; 2737 2738 /* Some controller variants snoop this value for Packet 2739 * transfers to do state machine and FIFO management. Thus we 2740 * want to set it properly, and for DMA where it is 2741 * effectively meaningless. 2742 */ 2743 nbytes = min(ata_qc_raw_nbytes(qc), (unsigned int)63 * 1024); 2744 2745 /* Most ATAPI devices which honor transfer chunk size don't 2746 * behave according to the spec when odd chunk size which 2747 * matches the transfer length is specified. If the number of 2748 * bytes to transfer is 2n+1. According to the spec, what 2749 * should happen is to indicate that 2n+1 is going to be 2750 * transferred and transfer 2n+2 bytes where the last byte is 2751 * padding. 2752 * 2753 * In practice, this doesn't happen. ATAPI devices first 2754 * indicate and transfer 2n bytes and then indicate and 2755 * transfer 2 bytes where the last byte is padding. 2756 * 2757 * This inconsistency confuses several controllers which 2758 * perform PIO using DMA such as Intel AHCIs and sil3124/32. 2759 * These controllers use actual number of transferred bytes to 2760 * update DMA poitner and transfer of 4n+2 bytes make those 2761 * controller push DMA pointer by 4n+4 bytes because SATA data 2762 * FISes are aligned to 4 bytes. This causes data corruption 2763 * and buffer overrun. 2764 * 2765 * Always setting nbytes to even number solves this problem 2766 * because then ATAPI devices don't have to split data at 2n 2767 * boundaries. 2768 */ 2769 if (nbytes & 0x1) 2770 nbytes++; 2771 2772 qc->tf.lbam = (nbytes & 0xFF); 2773 qc->tf.lbah = (nbytes >> 8); 2774 2775 if (nodata) 2776 qc->tf.protocol = ATAPI_PROT_NODATA; 2777 else if (using_pio) 2778 qc->tf.protocol = ATAPI_PROT_PIO; 2779 else { 2780 /* DMA data xfer */ 2781 qc->tf.protocol = ATAPI_PROT_DMA; 2782 qc->tf.feature |= ATAPI_PKT_DMA; 2783 2784 if ((dev->flags & ATA_DFLAG_DMADIR) && 2785 (scmd->sc_data_direction != DMA_TO_DEVICE)) 2786 /* some SATA bridges need us to indicate data xfer direction */ 2787 qc->tf.feature |= ATAPI_DMADIR; 2788 } 2789 2790 2791 /* FIXME: We need to translate 0x05 READ_BLOCK_LIMITS to a MODE_SENSE 2792 as ATAPI tape drives don't get this right otherwise */ 2793 return 0; 2794} 2795 2796static struct ata_device *ata_find_dev(struct ata_port *ap, int devno) 2797{ 2798 if (!sata_pmp_attached(ap)) { 2799 if (likely(devno < ata_link_max_devices(&ap->link))) 2800 return &ap->link.device[devno]; 2801 } else { 2802 if (likely(devno < ap->nr_pmp_links)) 2803 return &ap->pmp_link[devno].device[0]; 2804 } 2805 2806 return NULL; 2807} 2808 2809static struct ata_device *__ata_scsi_find_dev(struct ata_port *ap, 2810 const struct scsi_device *scsidev) 2811{ 2812 int devno; 2813 2814 /* skip commands not addressed to targets we simulate */ 2815 if (!sata_pmp_attached(ap)) { 2816 if (unlikely(scsidev->channel || scsidev->lun)) 2817 return NULL; 2818 devno = scsidev->id; 2819 } else { 2820 if (unlikely(scsidev->id || scsidev->lun)) 2821 return NULL; 2822 devno = scsidev->channel; 2823 } 2824 2825 return ata_find_dev(ap, devno); 2826} 2827 2828/** 2829 * ata_scsi_find_dev - lookup ata_device from scsi_cmnd 2830 * @ap: ATA port to which the device is attached 2831 * @scsidev: SCSI device from which we derive the ATA device 2832 * 2833 * Given various information provided in struct scsi_cmnd, 2834 * map that onto an ATA bus, and using that mapping 2835 * determine which ata_device is associated with the 2836 * SCSI command to be sent. 2837 * 2838 * LOCKING: 2839 * spin_lock_irqsave(host lock) 2840 * 2841 * RETURNS: 2842 * Associated ATA device, or %NULL if not found. 2843 */ 2844static struct ata_device * 2845ata_scsi_find_dev(struct ata_port *ap, const struct scsi_device *scsidev) 2846{ 2847 struct ata_device *dev = __ata_scsi_find_dev(ap, scsidev); 2848 2849 if (unlikely(!dev || !ata_dev_enabled(dev))) 2850 return NULL; 2851 2852 return dev; 2853} 2854 2855/* 2856 * ata_scsi_map_proto - Map pass-thru protocol value to taskfile value. 2857 * @byte1: Byte 1 from pass-thru CDB. 2858 * 2859 * RETURNS: 2860 * ATA_PROT_UNKNOWN if mapping failed/unimplemented, protocol otherwise. 2861 */ 2862static u8 2863ata_scsi_map_proto(u8 byte1) 2864{ 2865 switch((byte1 & 0x1e) >> 1) { 2866 case 3: /* Non-data */ 2867 return ATA_PROT_NODATA; 2868 2869 case 6: /* DMA */ 2870 case 10: /* UDMA Data-in */ 2871 case 11: /* UDMA Data-Out */ 2872 return ATA_PROT_DMA; 2873 2874 case 4: /* PIO Data-in */ 2875 case 5: /* PIO Data-out */ 2876 return ATA_PROT_PIO; 2877 2878 case 0: /* Hard Reset */ 2879 case 1: /* SRST */ 2880 case 8: /* Device Diagnostic */ 2881 case 9: /* Device Reset */ 2882 case 7: /* DMA Queued */ 2883 case 12: /* FPDMA */ 2884 case 15: /* Return Response Info */ 2885 default: /* Reserved */ 2886 break; 2887 } 2888 2889 return ATA_PROT_UNKNOWN; 2890} 2891 2892/** 2893 * ata_scsi_pass_thru - convert ATA pass-thru CDB to taskfile 2894 * @qc: command structure to be initialized 2895 * 2896 * Handles either 12 or 16-byte versions of the CDB. 2897 * 2898 * RETURNS: 2899 * Zero on success, non-zero on failure. 2900 */ 2901static unsigned int ata_scsi_pass_thru(struct ata_queued_cmd *qc) 2902{ 2903 struct ata_taskfile *tf = &(qc->tf); 2904 struct scsi_cmnd *scmd = qc->scsicmd; 2905 struct ata_device *dev = qc->dev; 2906 const u8 *cdb = scmd->cmnd; 2907 2908 if ((tf->protocol = ata_scsi_map_proto(cdb[1])) == ATA_PROT_UNKNOWN) 2909 goto invalid_fld; 2910 2911 /* 2912 * 12 and 16 byte CDBs use different offsets to 2913 * provide the various register values. 2914 */ 2915 if (cdb[0] == ATA_16) { 2916 /* 2917 * 16-byte CDB - may contain extended commands. 2918 * 2919 * If that is the case, copy the upper byte register values. 2920 */ 2921 if (cdb[1] & 0x01) { 2922 tf->hob_feature = cdb[3]; 2923 tf->hob_nsect = cdb[5]; 2924 tf->hob_lbal = cdb[7]; 2925 tf->hob_lbam = cdb[9]; 2926 tf->hob_lbah = cdb[11]; 2927 tf->flags |= ATA_TFLAG_LBA48; 2928 } else 2929 tf->flags &= ~ATA_TFLAG_LBA48; 2930 2931 /* 2932 * Always copy low byte, device and command registers. 2933 */ 2934 tf->feature = cdb[4]; 2935 tf->nsect = cdb[6]; 2936 tf->lbal = cdb[8]; 2937 tf->lbam = cdb[10]; 2938 tf->lbah = cdb[12]; 2939 tf->device = cdb[13]; 2940 tf->command = cdb[14]; 2941 } else { 2942 /* 2943 * 12-byte CDB - incapable of extended commands. 2944 */ 2945 tf->flags &= ~ATA_TFLAG_LBA48; 2946 2947 tf->feature = cdb[3]; 2948 tf->nsect = cdb[4]; 2949 tf->lbal = cdb[5]; 2950 tf->lbam = cdb[6]; 2951 tf->lbah = cdb[7]; 2952 tf->device = cdb[8]; 2953 tf->command = cdb[9]; 2954 } 2955 2956 /* enforce correct master/slave bit */ 2957 tf->device = dev->devno ? 2958 tf->device | ATA_DEV1 : tf->device & ~ATA_DEV1; 2959 2960 switch (tf->command) { 2961 /* READ/WRITE LONG use a non-standard sect_size */ 2962 case ATA_CMD_READ_LONG: 2963 case ATA_CMD_READ_LONG_ONCE: 2964 case ATA_CMD_WRITE_LONG: 2965 case ATA_CMD_WRITE_LONG_ONCE: 2966 if (tf->protocol != ATA_PROT_PIO || tf->nsect != 1) 2967 goto invalid_fld; 2968 qc->sect_size = scsi_bufflen(scmd); 2969 break; 2970 2971 /* commands using reported Logical Block size (e.g. 512 or 4K) */ 2972 case ATA_CMD_CFA_WRITE_NE: 2973 case ATA_CMD_CFA_TRANS_SECT: 2974 case ATA_CMD_CFA_WRITE_MULT_NE: 2975 /* XXX: case ATA_CMD_CFA_WRITE_SECTORS_WITHOUT_ERASE: */ 2976 case ATA_CMD_READ: 2977 case ATA_CMD_READ_EXT: 2978 case ATA_CMD_READ_QUEUED: 2979 /* XXX: case ATA_CMD_READ_QUEUED_EXT: */ 2980 case ATA_CMD_FPDMA_READ: 2981 case ATA_CMD_READ_MULTI: 2982 case ATA_CMD_READ_MULTI_EXT: 2983 case ATA_CMD_PIO_READ: 2984 case ATA_CMD_PIO_READ_EXT: 2985 case ATA_CMD_READ_STREAM_DMA_EXT: 2986 case ATA_CMD_READ_STREAM_EXT: 2987 case ATA_CMD_VERIFY: 2988 case ATA_CMD_VERIFY_EXT: 2989 case ATA_CMD_WRITE: 2990 case ATA_CMD_WRITE_EXT: 2991 case ATA_CMD_WRITE_FUA_EXT: 2992 case ATA_CMD_WRITE_QUEUED: 2993 case ATA_CMD_WRITE_QUEUED_FUA_EXT: 2994 case ATA_CMD_FPDMA_WRITE: 2995 case ATA_CMD_WRITE_MULTI: 2996 case ATA_CMD_WRITE_MULTI_EXT: 2997 case ATA_CMD_WRITE_MULTI_FUA_EXT: 2998 case ATA_CMD_PIO_WRITE: 2999 case ATA_CMD_PIO_WRITE_EXT: 3000 case ATA_CMD_WRITE_STREAM_DMA_EXT: 3001 case ATA_CMD_WRITE_STREAM_EXT: 3002 qc->sect_size = scmd->device->sector_size; 3003 break; 3004 3005 /* Everything else uses 512 byte "sectors" */ 3006 default: 3007 qc->sect_size = ATA_SECT_SIZE; 3008 } 3009 3010 /* 3011 * Set flags so that all registers will be written, pass on 3012 * write indication (used for PIO/DMA setup), result TF is 3013 * copied back and we don't whine too much about its failure. 3014 */ 3015 tf->flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; 3016 if (scmd->sc_data_direction == DMA_TO_DEVICE) 3017 tf->flags |= ATA_TFLAG_WRITE; 3018 3019 qc->flags |= ATA_QCFLAG_RESULT_TF | ATA_QCFLAG_QUIET; 3020 3021 /* 3022 * Set transfer length. 3023 * 3024 * TODO: find out if we need to do more here to 3025 * cover scatter/gather case. 3026 */ 3027 ata_qc_set_pc_nbytes(qc); 3028 3029 /* We may not issue DMA commands if no DMA mode is set */ 3030 if (tf->protocol == ATA_PROT_DMA && dev->dma_mode == 0) 3031 goto invalid_fld; 3032 3033 /* sanity check for pio multi commands */ 3034 if ((cdb[1] & 0xe0) && !is_multi_taskfile(tf)) 3035 goto invalid_fld; 3036 3037 if (is_multi_taskfile(tf)) { 3038 unsigned int multi_count = 1 << (cdb[1] >> 5); 3039 3040 /* compare the passed through multi_count 3041 * with the cached multi_count of libata 3042 */ 3043 if (multi_count != dev->multi_count) 3044 ata_dev_warn(dev, "invalid multi_count %u ignored\n", 3045 multi_count); 3046 } 3047 3048 /* 3049 * Filter SET_FEATURES - XFER MODE command -- otherwise, 3050 * SET_FEATURES - XFER MODE must be preceded/succeeded 3051 * by an update to hardware-specific registers for each 3052 * controller (i.e. the reason for ->set_piomode(), 3053 * ->set_dmamode(), and ->post_set_mode() hooks). 3054 */ 3055 if (tf->command == ATA_CMD_SET_FEATURES && 3056 tf->feature == SETFEATURES_XFER) 3057 goto invalid_fld; 3058 3059 /* 3060 * Filter TPM commands by default. These provide an 3061 * essentially uncontrolled encrypted "back door" between 3062 * applications and the disk. Set libata.allow_tpm=1 if you 3063 * have a real reason for wanting to use them. This ensures 3064 * that installed software cannot easily mess stuff up without 3065 * user intent. DVR type users will probably ship with this enabled 3066 * for movie content management. 3067 * 3068 * Note that for ATA8 we can issue a DCS change and DCS freeze lock 3069 * for this and should do in future but that it is not sufficient as 3070 * DCS is an optional feature set. Thus we also do the software filter 3071 * so that we comply with the TC consortium stated goal that the user 3072 * can turn off TC features of their system. 3073 */ 3074 if (tf->command >= 0x5C && tf->command <= 0x5F && !libata_allow_tpm) 3075 goto invalid_fld; 3076 3077 return 0; 3078 3079 invalid_fld: 3080 ata_scsi_set_sense(scmd, ILLEGAL_REQUEST, 0x24, 0x00); 3081 /* "Invalid field in cdb" */ 3082 return 1; 3083} 3084 3085static unsigned int ata_scsi_write_same_xlat(struct ata_queued_cmd *qc) 3086{ 3087 struct ata_taskfile *tf = &qc->tf; 3088 struct scsi_cmnd *scmd = qc->scsicmd; 3089 struct ata_device *dev = qc->dev; 3090 const u8 *cdb = scmd->cmnd; 3091 u64 block; 3092 u32 n_block; 3093 u32 size; 3094 void *buf; 3095 3096 /* we may not issue DMA commands if no DMA mode is set */ 3097 if (unlikely(!dev->dma_mode)) 3098 goto invalid_fld; 3099 3100 if (unlikely(scmd->cmd_len < 16)) 3101 goto invalid_fld; 3102 scsi_16_lba_len(cdb, &block, &n_block); 3103 3104 /* for now we only support WRITE SAME with the unmap bit set */ 3105 if (unlikely(!(cdb[1] & 0x8))) 3106 goto invalid_fld; 3107 3108 /* 3109 * WRITE SAME always has a sector sized buffer as payload, this 3110 * should never be a multiple entry S/G list. 3111 */ 3112 if (!scsi_sg_count(scmd)) 3113 goto invalid_fld; 3114 3115 buf = page_address(sg_page(scsi_sglist(scmd))); 3116 size = ata_set_lba_range_entries(buf, 512, block, n_block); 3117 3118 if (ata_ncq_enabled(dev) && ata_fpdma_dsm_supported(dev)) { 3119 /* Newer devices support queued TRIM commands */ 3120 tf->protocol = ATA_PROT_NCQ; 3121 tf->command = ATA_CMD_FPDMA_SEND; 3122 tf->hob_nsect = ATA_SUBCMD_FPDMA_SEND_DSM & 0x1f; 3123 tf->nsect = qc->tag << 3; 3124 tf->hob_feature = (size / 512) >> 8; 3125 tf->feature = size / 512; 3126 3127 tf->auxiliary = 1; 3128 } else { 3129 tf->protocol = ATA_PROT_DMA; 3130 tf->hob_feature = 0; 3131 tf->feature = ATA_DSM_TRIM; 3132 tf->hob_nsect = (size / 512) >> 8; 3133 tf->nsect = size / 512; 3134 tf->command = ATA_CMD_DSM; 3135 } 3136 3137 tf->flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE | ATA_TFLAG_LBA48 | 3138 ATA_TFLAG_WRITE; 3139 3140 ata_qc_set_pc_nbytes(qc); 3141 3142 return 0; 3143 3144 invalid_fld: 3145 ata_scsi_set_sense(scmd, ILLEGAL_REQUEST, 0x24, 0x00); 3146 /* "Invalid field in cdb" */ 3147 return 1; 3148} 3149 3150/** 3151 * ata_mselect_caching - Simulate MODE SELECT for caching info page 3152 * @qc: Storage for translated ATA taskfile 3153 * @buf: input buffer 3154 * @len: number of valid bytes in the input buffer 3155 * 3156 * Prepare a taskfile to modify caching information for the device. 3157 * 3158 * LOCKING: 3159 * None. 3160 */ 3161static int ata_mselect_caching(struct ata_queued_cmd *qc, 3162 const u8 *buf, int len) 3163{ 3164 struct ata_taskfile *tf = &qc->tf; 3165 struct ata_device *dev = qc->dev; 3166 char mpage[CACHE_MPAGE_LEN]; 3167 u8 wce; 3168 3169 /* 3170 * The first two bytes of def_cache_mpage are a header, so offsets 3171 * in mpage are off by 2 compared to buf. Same for len. 3172 */ 3173 3174 if (len != CACHE_MPAGE_LEN - 2) 3175 return -EINVAL; 3176 3177 wce = buf[0] & (1 << 2); 3178 3179 /* 3180 * Check that read-only bits are not modified. 3181 */ 3182 ata_msense_caching(dev->id, mpage, false); 3183 mpage[2] &= ~(1 << 2); 3184 mpage[2] |= wce; 3185 if (memcmp(mpage + 2, buf, CACHE_MPAGE_LEN - 2) != 0) 3186 return -EINVAL; 3187 3188 tf->flags |= ATA_TFLAG_DEVICE | ATA_TFLAG_ISADDR; 3189 tf->protocol = ATA_PROT_NODATA; 3190 tf->nsect = 0; 3191 tf->command = ATA_CMD_SET_FEATURES; 3192 tf->feature = wce ? SETFEATURES_WC_ON : SETFEATURES_WC_OFF; 3193 return 0; 3194} 3195 3196/** 3197 * ata_scsiop_mode_select - Simulate MODE SELECT 6, 10 commands 3198 * @qc: Storage for translated ATA taskfile 3199 * 3200 * Converts a MODE SELECT command to an ATA SET FEATURES taskfile. 3201 * Assume this is invoked for direct access devices (e.g. disks) only. 3202 * There should be no block descriptor for other device types. 3203 * 3204 * LOCKING: 3205 * spin_lock_irqsave(host lock) 3206 */ 3207static unsigned int ata_scsi_mode_select_xlat(struct ata_queued_cmd *qc) 3208{ 3209 struct scsi_cmnd *scmd = qc->scsicmd; 3210 const u8 *cdb = scmd->cmnd; 3211 const u8 *p; 3212 u8 pg, spg; 3213 unsigned six_byte, pg_len, hdr_len, bd_len; 3214 int len; 3215 3216 VPRINTK("ENTER\n"); 3217 3218 six_byte = (cdb[0] == MODE_SELECT); 3219 if (six_byte) { 3220 if (scmd->cmd_len < 5) 3221 goto invalid_fld; 3222 3223 len = cdb[4]; 3224 hdr_len = 4; 3225 } else { 3226 if (scmd->cmd_len < 9) 3227 goto invalid_fld; 3228 3229 len = (cdb[7] << 8) + cdb[8]; 3230 hdr_len = 8; 3231 } 3232 3233 /* We only support PF=1, SP=0. */ 3234 if ((cdb[1] & 0x11) != 0x10) 3235 goto invalid_fld; 3236 3237 /* Test early for possible overrun. */ 3238 if (!scsi_sg_count(scmd) || scsi_sglist(scmd)->length < len) 3239 goto invalid_param_len; 3240 3241 p = page_address(sg_page(scsi_sglist(scmd))); 3242 3243 /* Move past header and block descriptors. */ 3244 if (len < hdr_len) 3245 goto invalid_param_len; 3246 3247 if (six_byte) 3248 bd_len = p[3]; 3249 else 3250 bd_len = (p[6] << 8) + p[7]; 3251 3252 len -= hdr_len; 3253 p += hdr_len; 3254 if (len < bd_len) 3255 goto invalid_param_len; 3256 if (bd_len != 0 && bd_len != 8) 3257 goto invalid_param; 3258 3259 len -= bd_len; 3260 p += bd_len; 3261 if (len == 0) 3262 goto skip; 3263 3264 /* Parse both possible formats for the mode page headers. */ 3265 pg = p[0] & 0x3f; 3266 if (p[0] & 0x40) { 3267 if (len < 4) 3268 goto invalid_param_len; 3269 3270 spg = p[1]; 3271 pg_len = (p[2] << 8) | p[3]; 3272 p += 4; 3273 len -= 4; 3274 } else { 3275 if (len < 2) 3276 goto invalid_param_len; 3277 3278 spg = 0; 3279 pg_len = p[1]; 3280 p += 2; 3281 len -= 2; 3282 } 3283 3284 /* 3285 * No mode subpages supported (yet) but asking for _all_ 3286 * subpages may be valid 3287 */ 3288 if (spg && (spg != ALL_SUB_MPAGES)) 3289 goto invalid_param; 3290 if (pg_len > len) 3291 goto invalid_param_len; 3292 3293 switch (pg) { 3294 case CACHE_MPAGE: 3295 if (ata_mselect_caching(qc, p, pg_len) < 0) 3296 goto invalid_param; 3297 break; 3298 3299 default: /* invalid page code */ 3300 goto invalid_param; 3301 } 3302 3303 /* 3304 * Only one page has changeable data, so we only support setting one 3305 * page at a time. 3306 */ 3307 if (len > pg_len) 3308 goto invalid_param; 3309 3310 return 0; 3311 3312 invalid_fld: 3313 /* "Invalid field in CDB" */ 3314 ata_scsi_set_sense(scmd, ILLEGAL_REQUEST, 0x24, 0x0); 3315 return 1; 3316 3317 invalid_param: 3318 /* "Invalid field in parameter list" */ 3319 ata_scsi_set_sense(scmd, ILLEGAL_REQUEST, 0x26, 0x0); 3320 return 1; 3321 3322 invalid_param_len: 3323 /* "Parameter list length error" */ 3324 ata_scsi_set_sense(scmd, ILLEGAL_REQUEST, 0x1a, 0x0); 3325 return 1; 3326 3327 skip: 3328 scmd->result = SAM_STAT_GOOD; 3329 return 1; 3330} 3331 3332/** 3333 * ata_get_xlat_func - check if SCSI to ATA translation is possible 3334 * @dev: ATA device 3335 * @cmd: SCSI command opcode to consider 3336 * 3337 * Look up the SCSI command given, and determine whether the 3338 * SCSI command is to be translated or simulated. 3339 * 3340 * RETURNS: 3341 * Pointer to translation function if possible, %NULL if not. 3342 */ 3343 3344static inline ata_xlat_func_t ata_get_xlat_func(struct ata_device *dev, u8 cmd) 3345{ 3346 switch (cmd) { 3347 case READ_6: 3348 case READ_10: 3349 case READ_16: 3350 3351 case WRITE_6: 3352 case WRITE_10: 3353 case WRITE_16: 3354 return ata_scsi_rw_xlat; 3355 3356 case WRITE_SAME_16: 3357 return ata_scsi_write_same_xlat; 3358 3359 case SYNCHRONIZE_CACHE: 3360 if (ata_try_flush_cache(dev)) 3361 return ata_scsi_flush_xlat; 3362 break; 3363 3364 case VERIFY: 3365 case VERIFY_16: 3366 return ata_scsi_verify_xlat; 3367 3368 case ATA_12: 3369 case ATA_16: 3370 return ata_scsi_pass_thru; 3371 3372 case MODE_SELECT: 3373 case MODE_SELECT_10: 3374 return ata_scsi_mode_select_xlat; 3375 break; 3376 3377 case START_STOP: 3378 return ata_scsi_start_stop_xlat; 3379 } 3380 3381 return NULL; 3382} 3383 3384/** 3385 * ata_scsi_dump_cdb - dump SCSI command contents to dmesg 3386 * @ap: ATA port to which the command was being sent 3387 * @cmd: SCSI command to dump 3388 * 3389 * Prints the contents of a SCSI command via printk(). 3390 */ 3391 3392static inline void ata_scsi_dump_cdb(struct ata_port *ap, 3393 struct scsi_cmnd *cmd) 3394{ 3395#ifdef ATA_DEBUG 3396 struct scsi_device *scsidev = cmd->device; 3397 u8 *scsicmd = cmd->cmnd; 3398 3399 DPRINTK("CDB (%u:%d,%d,%d) %02x %02x %02x %02x %02x %02x %02x %02x %02x\n", 3400 ap->print_id, 3401 scsidev->channel, scsidev->id, scsidev->lun, 3402 scsicmd[0], scsicmd[1], scsicmd[2], scsicmd[3], 3403 scsicmd[4], scsicmd[5], scsicmd[6], scsicmd[7], 3404 scsicmd[8]); 3405#endif 3406} 3407 3408static inline int __ata_scsi_queuecmd(struct scsi_cmnd *scmd, 3409 struct ata_device *dev) 3410{ 3411 u8 scsi_op = scmd->cmnd[0]; 3412 ata_xlat_func_t xlat_func; 3413 int rc = 0; 3414 3415 if (dev->class == ATA_DEV_ATA) { 3416 if (unlikely(!scmd->cmd_len || scmd->cmd_len > dev->cdb_len)) 3417 goto bad_cdb_len; 3418 3419 xlat_func = ata_get_xlat_func(dev, scsi_op); 3420 } else { 3421 if (unlikely(!scmd->cmd_len)) 3422 goto bad_cdb_len; 3423 3424 xlat_func = NULL; 3425 if (likely((scsi_op != ATA_16) || !atapi_passthru16)) { 3426 /* relay SCSI command to ATAPI device */ 3427 int len = COMMAND_SIZE(scsi_op); 3428 if (unlikely(len > scmd->cmd_len || len > dev->cdb_len)) 3429 goto bad_cdb_len; 3430 3431 xlat_func = atapi_xlat; 3432 } else { 3433 /* ATA_16 passthru, treat as an ATA command */ 3434 if (unlikely(scmd->cmd_len > 16)) 3435 goto bad_cdb_len; 3436 3437 xlat_func = ata_get_xlat_func(dev, scsi_op); 3438 } 3439 } 3440 3441 if (xlat_func) 3442 rc = ata_scsi_translate(dev, scmd, xlat_func); 3443 else 3444 ata_scsi_simulate(dev, scmd); 3445 3446 return rc; 3447 3448 bad_cdb_len: 3449 DPRINTK("bad CDB len=%u, scsi_op=0x%02x, max=%u\n", 3450 scmd->cmd_len, scsi_op, dev->cdb_len); 3451 scmd->result = DID_ERROR << 16; 3452 scmd->scsi_done(scmd); 3453 return 0; 3454} 3455 3456/** 3457 * ata_scsi_queuecmd - Issue SCSI cdb to libata-managed device 3458 * @shost: SCSI host of command to be sent 3459 * @cmd: SCSI command to be sent 3460 * 3461 * In some cases, this function translates SCSI commands into 3462 * ATA taskfiles, and queues the taskfiles to be sent to 3463 * hardware. In other cases, this function simulates a 3464 * SCSI device by evaluating and responding to certain 3465 * SCSI commands. This creates the overall effect of 3466 * ATA and ATAPI devices appearing as SCSI devices. 3467 * 3468 * LOCKING: 3469 * ATA host lock 3470 * 3471 * RETURNS: 3472 * Return value from __ata_scsi_queuecmd() if @cmd can be queued, 3473 * 0 otherwise. 3474 */ 3475int ata_scsi_queuecmd(struct Scsi_Host *shost, struct scsi_cmnd *cmd) 3476{ 3477 struct ata_port *ap; 3478 struct ata_device *dev; 3479 struct scsi_device *scsidev = cmd->device; 3480 int rc = 0; 3481 unsigned long irq_flags; 3482 3483 ap = ata_shost_to_port(shost); 3484 3485 spin_lock_irqsave(ap->lock, irq_flags); 3486 3487 ata_scsi_dump_cdb(ap, cmd); 3488 3489 dev = ata_scsi_find_dev(ap, scsidev); 3490 if (likely(dev)) 3491 rc = __ata_scsi_queuecmd(cmd, dev); 3492 else { 3493 cmd->result = (DID_BAD_TARGET << 16); 3494 cmd->scsi_done(cmd); 3495 } 3496 3497 spin_unlock_irqrestore(ap->lock, irq_flags); 3498 3499 return rc; 3500} 3501 3502/** 3503 * ata_scsi_simulate - simulate SCSI command on ATA device 3504 * @dev: the target device 3505 * @cmd: SCSI command being sent to device. 3506 * 3507 * Interprets and directly executes a select list of SCSI commands 3508 * that can be handled internally. 3509 * 3510 * LOCKING: 3511 * spin_lock_irqsave(host lock) 3512 */ 3513 3514void ata_scsi_simulate(struct ata_device *dev, struct scsi_cmnd *cmd) 3515{ 3516 struct ata_scsi_args args; 3517 const u8 *scsicmd = cmd->cmnd; 3518 u8 tmp8; 3519 3520 args.dev = dev; 3521 args.id = dev->id; 3522 args.cmd = cmd; 3523 args.done = cmd->scsi_done; 3524 3525 switch(scsicmd[0]) { 3526 /* TODO: worth improving? */ 3527 case FORMAT_UNIT: 3528 ata_scsi_invalid_field(cmd); 3529 break; 3530 3531 case INQUIRY: 3532 if (scsicmd[1] & 2) /* is CmdDt set? */ 3533 ata_scsi_invalid_field(cmd); 3534 else if ((scsicmd[1] & 1) == 0) /* is EVPD clear? */ 3535 ata_scsi_rbuf_fill(&args, ata_scsiop_inq_std); 3536 else switch (scsicmd[2]) { 3537 case 0x00: 3538 ata_scsi_rbuf_fill(&args, ata_scsiop_inq_00); 3539 break; 3540 case 0x80: 3541 ata_scsi_rbuf_fill(&args, ata_scsiop_inq_80); 3542 break; 3543 case 0x83: 3544 ata_scsi_rbuf_fill(&args, ata_scsiop_inq_83); 3545 break; 3546 case 0x89: 3547 ata_scsi_rbuf_fill(&args, ata_scsiop_inq_89); 3548 break; 3549 case 0xb0: 3550 ata_scsi_rbuf_fill(&args, ata_scsiop_inq_b0); 3551 break; 3552 case 0xb1: 3553 ata_scsi_rbuf_fill(&args, ata_scsiop_inq_b1); 3554 break; 3555 case 0xb2: 3556 ata_scsi_rbuf_fill(&args, ata_scsiop_inq_b2); 3557 break; 3558 default: 3559 ata_scsi_invalid_field(cmd); 3560 break; 3561 } 3562 break; 3563 3564 case MODE_SENSE: 3565 case MODE_SENSE_10: 3566 ata_scsi_rbuf_fill(&args, ata_scsiop_mode_sense); 3567 break; 3568 3569 case READ_CAPACITY: 3570 ata_scsi_rbuf_fill(&args, ata_scsiop_read_cap); 3571 break; 3572 3573 case SERVICE_ACTION_IN: 3574 if ((scsicmd[1] & 0x1f) == SAI_READ_CAPACITY_16) 3575 ata_scsi_rbuf_fill(&args, ata_scsiop_read_cap); 3576 else 3577 ata_scsi_invalid_field(cmd); 3578 break; 3579 3580 case REPORT_LUNS: 3581 ata_scsi_rbuf_fill(&args, ata_scsiop_report_luns); 3582 break; 3583 3584 case REQUEST_SENSE: 3585 ata_scsi_set_sense(cmd, 0, 0, 0); 3586 cmd->result = (DRIVER_SENSE << 24); 3587 cmd->scsi_done(cmd); 3588 break; 3589 3590 /* if we reach this, then writeback caching is disabled, 3591 * turning this into a no-op. 3592 */ 3593 case SYNCHRONIZE_CACHE: 3594 /* fall through */ 3595 3596 /* no-op's, complete with success */ 3597 case REZERO_UNIT: 3598 case SEEK_6: 3599 case SEEK_10: 3600 case TEST_UNIT_READY: 3601 ata_scsi_rbuf_fill(&args, ata_scsiop_noop); 3602 break; 3603 3604 case SEND_DIAGNOSTIC: 3605 tmp8 = scsicmd[1] & ~(1 << 3); 3606 if ((tmp8 == 0x4) && (!scsicmd[3]) && (!scsicmd[4])) 3607 ata_scsi_rbuf_fill(&args, ata_scsiop_noop); 3608 else 3609 ata_scsi_invalid_field(cmd); 3610 break; 3611 3612 /* all other commands */ 3613 default: 3614 ata_scsi_set_sense(cmd, ILLEGAL_REQUEST, 0x20, 0x0); 3615 /* "Invalid command operation code" */ 3616 cmd->scsi_done(cmd); 3617 break; 3618 } 3619} 3620 3621int ata_scsi_add_hosts(struct ata_host *host, struct scsi_host_template *sht) 3622{ 3623 int i, rc; 3624 3625 for (i = 0; i < host->n_ports; i++) { 3626 struct ata_port *ap = host->ports[i]; 3627 struct Scsi_Host *shost; 3628 3629 rc = -ENOMEM; 3630 shost = scsi_host_alloc(sht, sizeof(struct ata_port *)); 3631 if (!shost) 3632 goto err_alloc; 3633 3634 shost->eh_noresume = 1; 3635 *(struct ata_port **)&shost->hostdata[0] = ap; 3636 ap->scsi_host = shost; 3637 3638 shost->transportt = ata_scsi_transport_template; 3639 shost->unique_id = ap->print_id; 3640 shost->max_id = 16; 3641 shost->max_lun = 1; 3642 shost->max_channel = 1; 3643 shost->max_cmd_len = 16; 3644 shost->no_write_same = 1; 3645 3646 /* Schedule policy is determined by ->qc_defer() 3647 * callback and it needs to see every deferred qc. 3648 * Set host_blocked to 1 to prevent SCSI midlayer from 3649 * automatically deferring requests. 3650 */ 3651 shost->max_host_blocked = 1; 3652 3653 rc = scsi_add_host_with_dma(ap->scsi_host, 3654 &ap->tdev, ap->host->dev); 3655 if (rc) 3656 goto err_add; 3657 } 3658 3659 return 0; 3660 3661 err_add: 3662 scsi_host_put(host->ports[i]->scsi_host); 3663 err_alloc: 3664 while (--i >= 0) { 3665 struct Scsi_Host *shost = host->ports[i]->scsi_host; 3666 3667 scsi_remove_host(shost); 3668 scsi_host_put(shost); 3669 } 3670 return rc; 3671} 3672 3673void ata_scsi_scan_host(struct ata_port *ap, int sync) 3674{ 3675 int tries = 5; 3676 struct ata_device *last_failed_dev = NULL; 3677 struct ata_link *link; 3678 struct ata_device *dev; 3679 3680 repeat: 3681 ata_for_each_link(link, ap, EDGE) { 3682 ata_for_each_dev(dev, link, ENABLED) { 3683 struct scsi_device *sdev; 3684 int channel = 0, id = 0; 3685 3686 if (dev->sdev) 3687 continue; 3688 3689 if (ata_is_host_link(link)) 3690 id = dev->devno; 3691 else 3692 channel = link->pmp; 3693 3694 sdev = __scsi_add_device(ap->scsi_host, channel, id, 0, 3695 NULL); 3696 if (!IS_ERR(sdev)) { 3697 dev->sdev = sdev; 3698 scsi_device_put(sdev); 3699 } else { 3700 dev->sdev = NULL; 3701 } 3702 } 3703 } 3704 3705 /* If we scanned while EH was in progress or allocation 3706 * failure occurred, scan would have failed silently. Check 3707 * whether all devices are attached. 3708 */ 3709 ata_for_each_link(link, ap, EDGE) { 3710 ata_for_each_dev(dev, link, ENABLED) { 3711 if (!dev->sdev) 3712 goto exit_loop; 3713 } 3714 } 3715 exit_loop: 3716 if (!link) 3717 return; 3718 3719 /* we're missing some SCSI devices */ 3720 if (sync) { 3721 /* If caller requested synchrnous scan && we've made 3722 * any progress, sleep briefly and repeat. 3723 */ 3724 if (dev != last_failed_dev) { 3725 msleep(100); 3726 last_failed_dev = dev; 3727 goto repeat; 3728 } 3729 3730 /* We might be failing to detect boot device, give it 3731 * a few more chances. 3732 */ 3733 if (--tries) { 3734 msleep(100); 3735 goto repeat; 3736 } 3737 3738 ata_port_err(ap, 3739 "WARNING: synchronous SCSI scan failed without making any progress, switching to async\n"); 3740 } 3741 3742 queue_delayed_work(system_long_wq, &ap->hotplug_task, 3743 round_jiffies_relative(HZ)); 3744} 3745 3746/** 3747 * ata_scsi_offline_dev - offline attached SCSI device 3748 * @dev: ATA device to offline attached SCSI device for 3749 * 3750 * This function is called from ata_eh_hotplug() and responsible 3751 * for taking the SCSI device attached to @dev offline. This 3752 * function is called with host lock which protects dev->sdev 3753 * against clearing. 3754 * 3755 * LOCKING: 3756 * spin_lock_irqsave(host lock) 3757 * 3758 * RETURNS: 3759 * 1 if attached SCSI device exists, 0 otherwise. 3760 */ 3761int ata_scsi_offline_dev(struct ata_device *dev) 3762{ 3763 if (dev->sdev) { 3764 scsi_device_set_state(dev->sdev, SDEV_OFFLINE); 3765 return 1; 3766 } 3767 return 0; 3768} 3769 3770/** 3771 * ata_scsi_remove_dev - remove attached SCSI device 3772 * @dev: ATA device to remove attached SCSI device for 3773 * 3774 * This function is called from ata_eh_scsi_hotplug() and 3775 * responsible for removing the SCSI device attached to @dev. 3776 * 3777 * LOCKING: 3778 * Kernel thread context (may sleep). 3779 */ 3780static void ata_scsi_remove_dev(struct ata_device *dev) 3781{ 3782 struct ata_port *ap = dev->link->ap; 3783 struct scsi_device *sdev; 3784 unsigned long flags; 3785 3786 /* Alas, we need to grab scan_mutex to ensure SCSI device 3787 * state doesn't change underneath us and thus 3788 * scsi_device_get() always succeeds. The mutex locking can 3789 * be removed if there is __scsi_device_get() interface which 3790 * increments reference counts regardless of device state. 3791 */ 3792 mutex_lock(&ap->scsi_host->scan_mutex); 3793 spin_lock_irqsave(ap->lock, flags); 3794 3795 /* clearing dev->sdev is protected by host lock */ 3796 sdev = dev->sdev; 3797 dev->sdev = NULL; 3798 3799 if (sdev) { 3800 /* If user initiated unplug races with us, sdev can go 3801 * away underneath us after the host lock and 3802 * scan_mutex are released. Hold onto it. 3803 */ 3804 if (scsi_device_get(sdev) == 0) { 3805 /* The following ensures the attached sdev is 3806 * offline on return from ata_scsi_offline_dev() 3807 * regardless it wins or loses the race 3808 * against this function. 3809 */ 3810 scsi_device_set_state(sdev, SDEV_OFFLINE); 3811 } else { 3812 WARN_ON(1); 3813 sdev = NULL; 3814 } 3815 } 3816 3817 spin_unlock_irqrestore(ap->lock, flags); 3818 mutex_unlock(&ap->scsi_host->scan_mutex); 3819 3820 if (sdev) { 3821 ata_dev_info(dev, "detaching (SCSI %s)\n", 3822 dev_name(&sdev->sdev_gendev)); 3823 3824 scsi_remove_device(sdev); 3825 scsi_device_put(sdev); 3826 } 3827} 3828 3829static void ata_scsi_handle_link_detach(struct ata_link *link) 3830{ 3831 struct ata_port *ap = link->ap; 3832 struct ata_device *dev; 3833 3834 ata_for_each_dev(dev, link, ALL) { 3835 unsigned long flags; 3836 3837 if (!(dev->flags & ATA_DFLAG_DETACHED)) 3838 continue; 3839 3840 spin_lock_irqsave(ap->lock, flags); 3841 dev->flags &= ~ATA_DFLAG_DETACHED; 3842 spin_unlock_irqrestore(ap->lock, flags); 3843 3844 if (zpodd_dev_enabled(dev)) 3845 zpodd_exit(dev); 3846 3847 ata_scsi_remove_dev(dev); 3848 } 3849} 3850 3851/** 3852 * ata_scsi_media_change_notify - send media change event 3853 * @dev: Pointer to the disk device with media change event 3854 * 3855 * Tell the block layer to send a media change notification 3856 * event. 3857 * 3858 * LOCKING: 3859 * spin_lock_irqsave(host lock) 3860 */ 3861void ata_scsi_media_change_notify(struct ata_device *dev) 3862{ 3863 if (dev->sdev) 3864 sdev_evt_send_simple(dev->sdev, SDEV_EVT_MEDIA_CHANGE, 3865 GFP_ATOMIC); 3866} 3867 3868/** 3869 * ata_scsi_hotplug - SCSI part of hotplug 3870 * @work: Pointer to ATA port to perform SCSI hotplug on 3871 * 3872 * Perform SCSI part of hotplug. It's executed from a separate 3873 * workqueue after EH completes. This is necessary because SCSI 3874 * hot plugging requires working EH and hot unplugging is 3875 * synchronized with hot plugging with a mutex. 3876 * 3877 * LOCKING: 3878 * Kernel thread context (may sleep). 3879 */ 3880void ata_scsi_hotplug(struct work_struct *work) 3881{ 3882 struct ata_port *ap = 3883 container_of(work, struct ata_port, hotplug_task.work); 3884 int i; 3885 3886 if (ap->pflags & ATA_PFLAG_UNLOADING) { 3887 DPRINTK("ENTER/EXIT - unloading\n"); 3888 return; 3889 } 3890 3891 /* 3892 * XXX - UGLY HACK 3893 * 3894 * The block layer suspend/resume path is fundamentally broken due 3895 * to freezable kthreads and workqueue and may deadlock if a block 3896 * device gets removed while resume is in progress. I don't know 3897 * what the solution is short of removing freezable kthreads and 3898 * workqueues altogether. 3899 * 3900 * The following is an ugly hack to avoid kicking off device 3901 * removal while freezer is active. This is a joke but does avoid 3902 * this particular deadlock scenario. 3903 * 3904 * https://bugzilla.kernel.org/show_bug.cgi?id=62801 3905 * http://marc.info/?l=linux-kernel&m=138695698516487 3906 */ 3907#ifdef CONFIG_FREEZER 3908 while (pm_freezing) 3909 msleep(10); 3910#endif 3911 3912 DPRINTK("ENTER\n"); 3913 mutex_lock(&ap->scsi_scan_mutex); 3914 3915 /* Unplug detached devices. We cannot use link iterator here 3916 * because PMP links have to be scanned even if PMP is 3917 * currently not attached. Iterate manually. 3918 */ 3919 ata_scsi_handle_link_detach(&ap->link); 3920 if (ap->pmp_link) 3921 for (i = 0; i < SATA_PMP_MAX_PORTS; i++) 3922 ata_scsi_handle_link_detach(&ap->pmp_link[i]); 3923 3924 /* scan for new ones */ 3925 ata_scsi_scan_host(ap, 0); 3926 3927 mutex_unlock(&ap->scsi_scan_mutex); 3928 DPRINTK("EXIT\n"); 3929} 3930 3931/** 3932 * ata_scsi_user_scan - indication for user-initiated bus scan 3933 * @shost: SCSI host to scan 3934 * @channel: Channel to scan 3935 * @id: ID to scan 3936 * @lun: LUN to scan 3937 * 3938 * This function is called when user explicitly requests bus 3939 * scan. Set probe pending flag and invoke EH. 3940 * 3941 * LOCKING: 3942 * SCSI layer (we don't care) 3943 * 3944 * RETURNS: 3945 * Zero. 3946 */ 3947int ata_scsi_user_scan(struct Scsi_Host *shost, unsigned int channel, 3948 unsigned int id, u64 lun) 3949{ 3950 struct ata_port *ap = ata_shost_to_port(shost); 3951 unsigned long flags; 3952 int devno, rc = 0; 3953 3954 if (!ap->ops->error_handler) 3955 return -EOPNOTSUPP; 3956 3957 if (lun != SCAN_WILD_CARD && lun) 3958 return -EINVAL; 3959 3960 if (!sata_pmp_attached(ap)) { 3961 if (channel != SCAN_WILD_CARD && channel) 3962 return -EINVAL; 3963 devno = id; 3964 } else { 3965 if (id != SCAN_WILD_CARD && id) 3966 return -EINVAL; 3967 devno = channel; 3968 } 3969 3970 spin_lock_irqsave(ap->lock, flags); 3971 3972 if (devno == SCAN_WILD_CARD) { 3973 struct ata_link *link; 3974 3975 ata_for_each_link(link, ap, EDGE) { 3976 struct ata_eh_info *ehi = &link->eh_info; 3977 ehi->probe_mask |= ATA_ALL_DEVICES; 3978 ehi->action |= ATA_EH_RESET; 3979 } 3980 } else { 3981 struct ata_device *dev = ata_find_dev(ap, devno); 3982 3983 if (dev) { 3984 struct ata_eh_info *ehi = &dev->link->eh_info; 3985 ehi->probe_mask |= 1 << dev->devno; 3986 ehi->action |= ATA_EH_RESET; 3987 } else 3988 rc = -EINVAL; 3989 } 3990 3991 if (rc == 0) { 3992 ata_port_schedule_eh(ap); 3993 spin_unlock_irqrestore(ap->lock, flags); 3994 ata_port_wait_eh(ap); 3995 } else 3996 spin_unlock_irqrestore(ap->lock, flags); 3997 3998 return rc; 3999} 4000 4001/** 4002 * ata_scsi_dev_rescan - initiate scsi_rescan_device() 4003 * @work: Pointer to ATA port to perform scsi_rescan_device() 4004 * 4005 * After ATA pass thru (SAT) commands are executed successfully, 4006 * libata need to propagate the changes to SCSI layer. 4007 * 4008 * LOCKING: 4009 * Kernel thread context (may sleep). 4010 */ 4011void ata_scsi_dev_rescan(struct work_struct *work) 4012{ 4013 struct ata_port *ap = 4014 container_of(work, struct ata_port, scsi_rescan_task); 4015 struct ata_link *link; 4016 struct ata_device *dev; 4017 unsigned long flags; 4018 4019 mutex_lock(&ap->scsi_scan_mutex); 4020 spin_lock_irqsave(ap->lock, flags); 4021 4022 ata_for_each_link(link, ap, EDGE) { 4023 ata_for_each_dev(dev, link, ENABLED) { 4024 struct scsi_device *sdev = dev->sdev; 4025 4026 if (!sdev) 4027 continue; 4028 if (scsi_device_get(sdev)) 4029 continue; 4030 4031 spin_unlock_irqrestore(ap->lock, flags); 4032 scsi_rescan_device(&(sdev->sdev_gendev)); 4033 scsi_device_put(sdev); 4034 spin_lock_irqsave(ap->lock, flags); 4035 } 4036 } 4037 4038 spin_unlock_irqrestore(ap->lock, flags); 4039 mutex_unlock(&ap->scsi_scan_mutex); 4040} 4041 4042/** 4043 * ata_sas_port_alloc - Allocate port for a SAS attached SATA device 4044 * @host: ATA host container for all SAS ports 4045 * @port_info: Information from low-level host driver 4046 * @shost: SCSI host that the scsi device is attached to 4047 * 4048 * LOCKING: 4049 * PCI/etc. bus probe sem. 4050 * 4051 * RETURNS: 4052 * ata_port pointer on success / NULL on failure. 4053 */ 4054 4055struct ata_port *ata_sas_port_alloc(struct ata_host *host, 4056 struct ata_port_info *port_info, 4057 struct Scsi_Host *shost) 4058{ 4059 struct ata_port *ap; 4060 4061 ap = ata_port_alloc(host); 4062 if (!ap) 4063 return NULL; 4064 4065 ap->port_no = 0; 4066 ap->lock = &host->lock; 4067 ap->pio_mask = port_info->pio_mask; 4068 ap->mwdma_mask = port_info->mwdma_mask; 4069 ap->udma_mask = port_info->udma_mask; 4070 ap->flags |= port_info->flags; 4071 ap->ops = port_info->port_ops; 4072 ap->cbl = ATA_CBL_SATA; 4073 4074 return ap; 4075} 4076EXPORT_SYMBOL_GPL(ata_sas_port_alloc); 4077 4078/** 4079 * ata_sas_port_start - Set port up for dma. 4080 * @ap: Port to initialize 4081 * 4082 * Called just after data structures for each port are 4083 * initialized. 4084 * 4085 * May be used as the port_start() entry in ata_port_operations. 4086 * 4087 * LOCKING: 4088 * Inherited from caller. 4089 */ 4090int ata_sas_port_start(struct ata_port *ap) 4091{ 4092 /* 4093 * the port is marked as frozen at allocation time, but if we don't 4094 * have new eh, we won't thaw it 4095 */ 4096 if (!ap->ops->error_handler) 4097 ap->pflags &= ~ATA_PFLAG_FROZEN; 4098 return 0; 4099} 4100EXPORT_SYMBOL_GPL(ata_sas_port_start); 4101 4102/** 4103 * ata_port_stop - Undo ata_sas_port_start() 4104 * @ap: Port to shut down 4105 * 4106 * May be used as the port_stop() entry in ata_port_operations. 4107 * 4108 * LOCKING: 4109 * Inherited from caller. 4110 */ 4111 4112void ata_sas_port_stop(struct ata_port *ap) 4113{ 4114} 4115EXPORT_SYMBOL_GPL(ata_sas_port_stop); 4116 4117/** 4118 * ata_sas_async_probe - simply schedule probing and return 4119 * @ap: Port to probe 4120 * 4121 * For batch scheduling of probe for sas attached ata devices, assumes 4122 * the port has already been through ata_sas_port_init() 4123 */ 4124void ata_sas_async_probe(struct ata_port *ap) 4125{ 4126 __ata_port_probe(ap); 4127} 4128EXPORT_SYMBOL_GPL(ata_sas_async_probe); 4129 4130int ata_sas_sync_probe(struct ata_port *ap) 4131{ 4132 return ata_port_probe(ap); 4133} 4134EXPORT_SYMBOL_GPL(ata_sas_sync_probe); 4135 4136 4137/** 4138 * ata_sas_port_init - Initialize a SATA device 4139 * @ap: SATA port to initialize 4140 * 4141 * LOCKING: 4142 * PCI/etc. bus probe sem. 4143 * 4144 * RETURNS: 4145 * Zero on success, non-zero on error. 4146 */ 4147 4148int ata_sas_port_init(struct ata_port *ap) 4149{ 4150 int rc = ap->ops->port_start(ap); 4151 4152 if (rc) 4153 return rc; 4154 ap->print_id = atomic_inc_return(&ata_print_id); 4155 return 0; 4156} 4157EXPORT_SYMBOL_GPL(ata_sas_port_init); 4158 4159/** 4160 * ata_sas_port_destroy - Destroy a SATA port allocated by ata_sas_port_alloc 4161 * @ap: SATA port to destroy 4162 * 4163 */ 4164 4165void ata_sas_port_destroy(struct ata_port *ap) 4166{ 4167 if (ap->ops->port_stop) 4168 ap->ops->port_stop(ap); 4169 kfree(ap); 4170} 4171EXPORT_SYMBOL_GPL(ata_sas_port_destroy); 4172 4173/** 4174 * ata_sas_slave_configure - Default slave_config routine for libata devices 4175 * @sdev: SCSI device to configure 4176 * @ap: ATA port to which SCSI device is attached 4177 * 4178 * RETURNS: 4179 * Zero. 4180 */ 4181 4182int ata_sas_slave_configure(struct scsi_device *sdev, struct ata_port *ap) 4183{ 4184 ata_scsi_sdev_config(sdev); 4185 ata_scsi_dev_config(sdev, ap->link.device); 4186 return 0; 4187} 4188EXPORT_SYMBOL_GPL(ata_sas_slave_configure); 4189 4190/** 4191 * ata_sas_queuecmd - Issue SCSI cdb to libata-managed device 4192 * @cmd: SCSI command to be sent 4193 * @ap: ATA port to which the command is being sent 4194 * 4195 * RETURNS: 4196 * Return value from __ata_scsi_queuecmd() if @cmd can be queued, 4197 * 0 otherwise. 4198 */ 4199 4200int ata_sas_queuecmd(struct scsi_cmnd *cmd, struct ata_port *ap) 4201{ 4202 int rc = 0; 4203 4204 ata_scsi_dump_cdb(ap, cmd); 4205 4206 if (likely(ata_dev_enabled(ap->link.device))) 4207 rc = __ata_scsi_queuecmd(cmd, ap->link.device); 4208 else { 4209 cmd->result = (DID_BAD_TARGET << 16); 4210 cmd->scsi_done(cmd); 4211 } 4212 return rc; 4213} 4214EXPORT_SYMBOL_GPL(ata_sas_queuecmd); 4215