1/* 2 * Copyright © 2006-2011 Intel Corporation 3 * 4 * This program is free software; you can redistribute it and/or modify it 5 * under the terms and conditions of the GNU General Public License, 6 * version 2, as published by the Free Software Foundation. 7 * 8 * This program is distributed in the hope it will be useful, but WITHOUT 9 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 10 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 11 * more details. 12 * 13 * You should have received a copy of the GNU General Public License along with 14 * this program; if not, write to the Free Software Foundation, Inc., 15 * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. 16 * 17 * Authors: 18 * Eric Anholt <eric@anholt.net> 19 */ 20 21#include <linux/i2c.h> 22 23#include <drm/drmP.h> 24#include "framebuffer.h" 25#include "psb_drv.h" 26#include "psb_intel_drv.h" 27#include "psb_intel_reg.h" 28#include "gma_display.h" 29#include "power.h" 30 31#define INTEL_LIMIT_I9XX_SDVO_DAC 0 32#define INTEL_LIMIT_I9XX_LVDS 1 33 34static const struct gma_limit_t psb_intel_limits[] = { 35 { /* INTEL_LIMIT_I9XX_SDVO_DAC */ 36 .dot = {.min = 20000, .max = 400000}, 37 .vco = {.min = 1400000, .max = 2800000}, 38 .n = {.min = 1, .max = 6}, 39 .m = {.min = 70, .max = 120}, 40 .m1 = {.min = 8, .max = 18}, 41 .m2 = {.min = 3, .max = 7}, 42 .p = {.min = 5, .max = 80}, 43 .p1 = {.min = 1, .max = 8}, 44 .p2 = {.dot_limit = 200000, .p2_slow = 10, .p2_fast = 5}, 45 .find_pll = gma_find_best_pll, 46 }, 47 { /* INTEL_LIMIT_I9XX_LVDS */ 48 .dot = {.min = 20000, .max = 400000}, 49 .vco = {.min = 1400000, .max = 2800000}, 50 .n = {.min = 1, .max = 6}, 51 .m = {.min = 70, .max = 120}, 52 .m1 = {.min = 8, .max = 18}, 53 .m2 = {.min = 3, .max = 7}, 54 .p = {.min = 7, .max = 98}, 55 .p1 = {.min = 1, .max = 8}, 56 /* The single-channel range is 25-112Mhz, and dual-channel 57 * is 80-224Mhz. Prefer single channel as much as possible. 58 */ 59 .p2 = {.dot_limit = 112000, .p2_slow = 14, .p2_fast = 7}, 60 .find_pll = gma_find_best_pll, 61 }, 62}; 63 64static const struct gma_limit_t *psb_intel_limit(struct drm_crtc *crtc, 65 int refclk) 66{ 67 const struct gma_limit_t *limit; 68 69 if (gma_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) 70 limit = &psb_intel_limits[INTEL_LIMIT_I9XX_LVDS]; 71 else 72 limit = &psb_intel_limits[INTEL_LIMIT_I9XX_SDVO_DAC]; 73 return limit; 74} 75 76static void psb_intel_clock(int refclk, struct gma_clock_t *clock) 77{ 78 clock->m = 5 * (clock->m1 + 2) + (clock->m2 + 2); 79 clock->p = clock->p1 * clock->p2; 80 clock->vco = refclk * clock->m / (clock->n + 2); 81 clock->dot = clock->vco / clock->p; 82} 83 84/** 85 * Return the pipe currently connected to the panel fitter, 86 * or -1 if the panel fitter is not present or not in use 87 */ 88static int psb_intel_panel_fitter_pipe(struct drm_device *dev) 89{ 90 u32 pfit_control; 91 92 pfit_control = REG_READ(PFIT_CONTROL); 93 94 /* See if the panel fitter is in use */ 95 if ((pfit_control & PFIT_ENABLE) == 0) 96 return -1; 97 /* Must be on PIPE 1 for PSB */ 98 return 1; 99} 100 101static int psb_intel_crtc_mode_set(struct drm_crtc *crtc, 102 struct drm_display_mode *mode, 103 struct drm_display_mode *adjusted_mode, 104 int x, int y, 105 struct drm_framebuffer *old_fb) 106{ 107 struct drm_device *dev = crtc->dev; 108 struct drm_psb_private *dev_priv = dev->dev_private; 109 struct gma_crtc *gma_crtc = to_gma_crtc(crtc); 110 struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private; 111 int pipe = gma_crtc->pipe; 112 const struct psb_offset *map = &dev_priv->regmap[pipe]; 113 int refclk; 114 struct gma_clock_t clock; 115 u32 dpll = 0, fp = 0, dspcntr, pipeconf; 116 bool ok, is_sdvo = false; 117 bool is_lvds = false, is_tv = false; 118 struct drm_mode_config *mode_config = &dev->mode_config; 119 struct drm_connector *connector; 120 const struct gma_limit_t *limit; 121 122 /* No scan out no play */ 123 if (crtc->primary->fb == NULL) { 124 crtc_funcs->mode_set_base(crtc, x, y, old_fb); 125 return 0; 126 } 127 128 list_for_each_entry(connector, &mode_config->connector_list, head) { 129 struct gma_encoder *gma_encoder = gma_attached_encoder(connector); 130 131 if (!connector->encoder 132 || connector->encoder->crtc != crtc) 133 continue; 134 135 switch (gma_encoder->type) { 136 case INTEL_OUTPUT_LVDS: 137 is_lvds = true; 138 break; 139 case INTEL_OUTPUT_SDVO: 140 is_sdvo = true; 141 break; 142 case INTEL_OUTPUT_TVOUT: 143 is_tv = true; 144 break; 145 } 146 } 147 148 refclk = 96000; 149 150 limit = gma_crtc->clock_funcs->limit(crtc, refclk); 151 152 ok = limit->find_pll(limit, crtc, adjusted_mode->clock, refclk, 153 &clock); 154 if (!ok) { 155 DRM_ERROR("Couldn't find PLL settings for mode! target: %d, actual: %d", 156 adjusted_mode->clock, clock.dot); 157 return 0; 158 } 159 160 fp = clock.n << 16 | clock.m1 << 8 | clock.m2; 161 162 dpll = DPLL_VGA_MODE_DIS; 163 if (is_lvds) { 164 dpll |= DPLLB_MODE_LVDS; 165 dpll |= DPLL_DVO_HIGH_SPEED; 166 } else 167 dpll |= DPLLB_MODE_DAC_SERIAL; 168 if (is_sdvo) { 169 int sdvo_pixel_multiply = 170 adjusted_mode->clock / mode->clock; 171 dpll |= DPLL_DVO_HIGH_SPEED; 172 dpll |= 173 (sdvo_pixel_multiply - 1) << SDVO_MULTIPLIER_SHIFT_HIRES; 174 } 175 176 /* compute bitmask from p1 value */ 177 dpll |= (1 << (clock.p1 - 1)) << 16; 178 switch (clock.p2) { 179 case 5: 180 dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_5; 181 break; 182 case 7: 183 dpll |= DPLLB_LVDS_P2_CLOCK_DIV_7; 184 break; 185 case 10: 186 dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_10; 187 break; 188 case 14: 189 dpll |= DPLLB_LVDS_P2_CLOCK_DIV_14; 190 break; 191 } 192 193 if (is_tv) { 194 /* XXX: just matching BIOS for now */ 195/* dpll |= PLL_REF_INPUT_TVCLKINBC; */ 196 dpll |= 3; 197 } 198 dpll |= PLL_REF_INPUT_DREFCLK; 199 200 /* setup pipeconf */ 201 pipeconf = REG_READ(map->conf); 202 203 /* Set up the display plane register */ 204 dspcntr = DISPPLANE_GAMMA_ENABLE; 205 206 if (pipe == 0) 207 dspcntr |= DISPPLANE_SEL_PIPE_A; 208 else 209 dspcntr |= DISPPLANE_SEL_PIPE_B; 210 211 dspcntr |= DISPLAY_PLANE_ENABLE; 212 pipeconf |= PIPEACONF_ENABLE; 213 dpll |= DPLL_VCO_ENABLE; 214 215 216 /* Disable the panel fitter if it was on our pipe */ 217 if (psb_intel_panel_fitter_pipe(dev) == pipe) 218 REG_WRITE(PFIT_CONTROL, 0); 219 220 drm_mode_debug_printmodeline(mode); 221 222 if (dpll & DPLL_VCO_ENABLE) { 223 REG_WRITE(map->fp0, fp); 224 REG_WRITE(map->dpll, dpll & ~DPLL_VCO_ENABLE); 225 REG_READ(map->dpll); 226 udelay(150); 227 } 228 229 /* The LVDS pin pair needs to be on before the DPLLs are enabled. 230 * This is an exception to the general rule that mode_set doesn't turn 231 * things on. 232 */ 233 if (is_lvds) { 234 u32 lvds = REG_READ(LVDS); 235 236 lvds &= ~LVDS_PIPEB_SELECT; 237 if (pipe == 1) 238 lvds |= LVDS_PIPEB_SELECT; 239 240 lvds |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP; 241 /* Set the B0-B3 data pairs corresponding to 242 * whether we're going to 243 * set the DPLLs for dual-channel mode or not. 244 */ 245 lvds &= ~(LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP); 246 if (clock.p2 == 7) 247 lvds |= LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP; 248 249 /* It would be nice to set 24 vs 18-bit mode (LVDS_A3_POWER_UP) 250 * appropriately here, but we need to look more 251 * thoroughly into how panels behave in the two modes. 252 */ 253 254 REG_WRITE(LVDS, lvds); 255 REG_READ(LVDS); 256 } 257 258 REG_WRITE(map->fp0, fp); 259 REG_WRITE(map->dpll, dpll); 260 REG_READ(map->dpll); 261 /* Wait for the clocks to stabilize. */ 262 udelay(150); 263 264 /* write it again -- the BIOS does, after all */ 265 REG_WRITE(map->dpll, dpll); 266 267 REG_READ(map->dpll); 268 /* Wait for the clocks to stabilize. */ 269 udelay(150); 270 271 REG_WRITE(map->htotal, (adjusted_mode->crtc_hdisplay - 1) | 272 ((adjusted_mode->crtc_htotal - 1) << 16)); 273 REG_WRITE(map->hblank, (adjusted_mode->crtc_hblank_start - 1) | 274 ((adjusted_mode->crtc_hblank_end - 1) << 16)); 275 REG_WRITE(map->hsync, (adjusted_mode->crtc_hsync_start - 1) | 276 ((adjusted_mode->crtc_hsync_end - 1) << 16)); 277 REG_WRITE(map->vtotal, (adjusted_mode->crtc_vdisplay - 1) | 278 ((adjusted_mode->crtc_vtotal - 1) << 16)); 279 REG_WRITE(map->vblank, (adjusted_mode->crtc_vblank_start - 1) | 280 ((adjusted_mode->crtc_vblank_end - 1) << 16)); 281 REG_WRITE(map->vsync, (adjusted_mode->crtc_vsync_start - 1) | 282 ((adjusted_mode->crtc_vsync_end - 1) << 16)); 283 /* pipesrc and dspsize control the size that is scaled from, 284 * which should always be the user's requested size. 285 */ 286 REG_WRITE(map->size, 287 ((mode->vdisplay - 1) << 16) | (mode->hdisplay - 1)); 288 REG_WRITE(map->pos, 0); 289 REG_WRITE(map->src, 290 ((mode->hdisplay - 1) << 16) | (mode->vdisplay - 1)); 291 REG_WRITE(map->conf, pipeconf); 292 REG_READ(map->conf); 293 294 gma_wait_for_vblank(dev); 295 296 REG_WRITE(map->cntr, dspcntr); 297 298 /* Flush the plane changes */ 299 crtc_funcs->mode_set_base(crtc, x, y, old_fb); 300 301 gma_wait_for_vblank(dev); 302 303 return 0; 304} 305 306/* Returns the clock of the currently programmed mode of the given pipe. */ 307static int psb_intel_crtc_clock_get(struct drm_device *dev, 308 struct drm_crtc *crtc) 309{ 310 struct gma_crtc *gma_crtc = to_gma_crtc(crtc); 311 struct drm_psb_private *dev_priv = dev->dev_private; 312 int pipe = gma_crtc->pipe; 313 const struct psb_offset *map = &dev_priv->regmap[pipe]; 314 u32 dpll; 315 u32 fp; 316 struct gma_clock_t clock; 317 bool is_lvds; 318 struct psb_pipe *p = &dev_priv->regs.pipe[pipe]; 319 320 if (gma_power_begin(dev, false)) { 321 dpll = REG_READ(map->dpll); 322 if ((dpll & DISPLAY_RATE_SELECT_FPA1) == 0) 323 fp = REG_READ(map->fp0); 324 else 325 fp = REG_READ(map->fp1); 326 is_lvds = (pipe == 1) && (REG_READ(LVDS) & LVDS_PORT_EN); 327 gma_power_end(dev); 328 } else { 329 dpll = p->dpll; 330 331 if ((dpll & DISPLAY_RATE_SELECT_FPA1) == 0) 332 fp = p->fp0; 333 else 334 fp = p->fp1; 335 336 is_lvds = (pipe == 1) && (dev_priv->regs.psb.saveLVDS & 337 LVDS_PORT_EN); 338 } 339 340 clock.m1 = (fp & FP_M1_DIV_MASK) >> FP_M1_DIV_SHIFT; 341 clock.m2 = (fp & FP_M2_DIV_MASK) >> FP_M2_DIV_SHIFT; 342 clock.n = (fp & FP_N_DIV_MASK) >> FP_N_DIV_SHIFT; 343 344 if (is_lvds) { 345 clock.p1 = 346 ffs((dpll & 347 DPLL_FPA01_P1_POST_DIV_MASK_I830_LVDS) >> 348 DPLL_FPA01_P1_POST_DIV_SHIFT); 349 clock.p2 = 14; 350 351 if ((dpll & PLL_REF_INPUT_MASK) == 352 PLLB_REF_INPUT_SPREADSPECTRUMIN) { 353 /* XXX: might not be 66MHz */ 354 psb_intel_clock(66000, &clock); 355 } else 356 psb_intel_clock(48000, &clock); 357 } else { 358 if (dpll & PLL_P1_DIVIDE_BY_TWO) 359 clock.p1 = 2; 360 else { 361 clock.p1 = 362 ((dpll & 363 DPLL_FPA01_P1_POST_DIV_MASK_I830) >> 364 DPLL_FPA01_P1_POST_DIV_SHIFT) + 2; 365 } 366 if (dpll & PLL_P2_DIVIDE_BY_4) 367 clock.p2 = 4; 368 else 369 clock.p2 = 2; 370 371 psb_intel_clock(48000, &clock); 372 } 373 374 /* XXX: It would be nice to validate the clocks, but we can't reuse 375 * i830PllIsValid() because it relies on the xf86_config connector 376 * configuration being accurate, which it isn't necessarily. 377 */ 378 379 return clock.dot; 380} 381 382/** Returns the currently programmed mode of the given pipe. */ 383struct drm_display_mode *psb_intel_crtc_mode_get(struct drm_device *dev, 384 struct drm_crtc *crtc) 385{ 386 struct gma_crtc *gma_crtc = to_gma_crtc(crtc); 387 int pipe = gma_crtc->pipe; 388 struct drm_display_mode *mode; 389 int htot; 390 int hsync; 391 int vtot; 392 int vsync; 393 struct drm_psb_private *dev_priv = dev->dev_private; 394 struct psb_pipe *p = &dev_priv->regs.pipe[pipe]; 395 const struct psb_offset *map = &dev_priv->regmap[pipe]; 396 397 if (gma_power_begin(dev, false)) { 398 htot = REG_READ(map->htotal); 399 hsync = REG_READ(map->hsync); 400 vtot = REG_READ(map->vtotal); 401 vsync = REG_READ(map->vsync); 402 gma_power_end(dev); 403 } else { 404 htot = p->htotal; 405 hsync = p->hsync; 406 vtot = p->vtotal; 407 vsync = p->vsync; 408 } 409 410 mode = kzalloc(sizeof(*mode), GFP_KERNEL); 411 if (!mode) 412 return NULL; 413 414 mode->clock = psb_intel_crtc_clock_get(dev, crtc); 415 mode->hdisplay = (htot & 0xffff) + 1; 416 mode->htotal = ((htot & 0xffff0000) >> 16) + 1; 417 mode->hsync_start = (hsync & 0xffff) + 1; 418 mode->hsync_end = ((hsync & 0xffff0000) >> 16) + 1; 419 mode->vdisplay = (vtot & 0xffff) + 1; 420 mode->vtotal = ((vtot & 0xffff0000) >> 16) + 1; 421 mode->vsync_start = (vsync & 0xffff) + 1; 422 mode->vsync_end = ((vsync & 0xffff0000) >> 16) + 1; 423 424 drm_mode_set_name(mode); 425 drm_mode_set_crtcinfo(mode, 0); 426 427 return mode; 428} 429 430const struct drm_crtc_helper_funcs psb_intel_helper_funcs = { 431 .dpms = gma_crtc_dpms, 432 .mode_fixup = gma_crtc_mode_fixup, 433 .mode_set = psb_intel_crtc_mode_set, 434 .mode_set_base = gma_pipe_set_base, 435 .prepare = gma_crtc_prepare, 436 .commit = gma_crtc_commit, 437 .disable = gma_crtc_disable, 438}; 439 440const struct drm_crtc_funcs psb_intel_crtc_funcs = { 441 .save = gma_crtc_save, 442 .restore = gma_crtc_restore, 443 .cursor_set = gma_crtc_cursor_set, 444 .cursor_move = gma_crtc_cursor_move, 445 .gamma_set = gma_crtc_gamma_set, 446 .set_config = gma_crtc_set_config, 447 .destroy = gma_crtc_destroy, 448}; 449 450const struct gma_clock_funcs psb_clock_funcs = { 451 .clock = psb_intel_clock, 452 .limit = psb_intel_limit, 453 .pll_is_valid = gma_pll_is_valid, 454}; 455 456/* 457 * Set the default value of cursor control and base register 458 * to zero. This is a workaround for h/w defect on Oaktrail 459 */ 460static void psb_intel_cursor_init(struct drm_device *dev, 461 struct gma_crtc *gma_crtc) 462{ 463 struct drm_psb_private *dev_priv = dev->dev_private; 464 u32 control[3] = { CURACNTR, CURBCNTR, CURCCNTR }; 465 u32 base[3] = { CURABASE, CURBBASE, CURCBASE }; 466 struct gtt_range *cursor_gt; 467 468 if (dev_priv->ops->cursor_needs_phys) { 469 /* Allocate 4 pages of stolen mem for a hardware cursor. That 470 * is enough for the 64 x 64 ARGB cursors we support. 471 */ 472 cursor_gt = psb_gtt_alloc_range(dev, 4 * PAGE_SIZE, "cursor", 1, 473 PAGE_SIZE); 474 if (!cursor_gt) { 475 gma_crtc->cursor_gt = NULL; 476 goto out; 477 } 478 gma_crtc->cursor_gt = cursor_gt; 479 gma_crtc->cursor_addr = dev_priv->stolen_base + 480 cursor_gt->offset; 481 } else { 482 gma_crtc->cursor_gt = NULL; 483 } 484 485out: 486 REG_WRITE(control[gma_crtc->pipe], 0); 487 REG_WRITE(base[gma_crtc->pipe], 0); 488} 489 490void psb_intel_crtc_init(struct drm_device *dev, int pipe, 491 struct psb_intel_mode_device *mode_dev) 492{ 493 struct drm_psb_private *dev_priv = dev->dev_private; 494 struct gma_crtc *gma_crtc; 495 int i; 496 uint16_t *r_base, *g_base, *b_base; 497 498 /* We allocate a extra array of drm_connector pointers 499 * for fbdev after the crtc */ 500 gma_crtc = kzalloc(sizeof(struct gma_crtc) + 501 (INTELFB_CONN_LIMIT * sizeof(struct drm_connector *)), 502 GFP_KERNEL); 503 if (gma_crtc == NULL) 504 return; 505 506 gma_crtc->crtc_state = 507 kzalloc(sizeof(struct psb_intel_crtc_state), GFP_KERNEL); 508 if (!gma_crtc->crtc_state) { 509 dev_err(dev->dev, "Crtc state error: No memory\n"); 510 kfree(gma_crtc); 511 return; 512 } 513 514 /* Set the CRTC operations from the chip specific data */ 515 drm_crtc_init(dev, &gma_crtc->base, dev_priv->ops->crtc_funcs); 516 517 /* Set the CRTC clock functions from chip specific data */ 518 gma_crtc->clock_funcs = dev_priv->ops->clock_funcs; 519 520 drm_mode_crtc_set_gamma_size(&gma_crtc->base, 256); 521 gma_crtc->pipe = pipe; 522 gma_crtc->plane = pipe; 523 524 r_base = gma_crtc->base.gamma_store; 525 g_base = r_base + 256; 526 b_base = g_base + 256; 527 for (i = 0; i < 256; i++) { 528 gma_crtc->lut_r[i] = i; 529 gma_crtc->lut_g[i] = i; 530 gma_crtc->lut_b[i] = i; 531 r_base[i] = i << 8; 532 g_base[i] = i << 8; 533 b_base[i] = i << 8; 534 535 gma_crtc->lut_adj[i] = 0; 536 } 537 538 gma_crtc->mode_dev = mode_dev; 539 gma_crtc->cursor_addr = 0; 540 541 drm_crtc_helper_add(&gma_crtc->base, 542 dev_priv->ops->crtc_helper); 543 544 /* Setup the array of drm_connector pointer array */ 545 gma_crtc->mode_set.crtc = &gma_crtc->base; 546 BUG_ON(pipe >= ARRAY_SIZE(dev_priv->plane_to_crtc_mapping) || 547 dev_priv->plane_to_crtc_mapping[gma_crtc->plane] != NULL); 548 dev_priv->plane_to_crtc_mapping[gma_crtc->plane] = &gma_crtc->base; 549 dev_priv->pipe_to_crtc_mapping[gma_crtc->pipe] = &gma_crtc->base; 550 gma_crtc->mode_set.connectors = (struct drm_connector **)(gma_crtc + 1); 551 gma_crtc->mode_set.num_connectors = 0; 552 psb_intel_cursor_init(dev, gma_crtc); 553 554 /* Set to true so that the pipe is forced off on initial config. */ 555 gma_crtc->active = true; 556} 557 558struct drm_crtc *psb_intel_get_crtc_from_pipe(struct drm_device *dev, int pipe) 559{ 560 struct drm_crtc *crtc = NULL; 561 562 list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { 563 struct gma_crtc *gma_crtc = to_gma_crtc(crtc); 564 if (gma_crtc->pipe == pipe) 565 break; 566 } 567 return crtc; 568} 569 570int gma_connector_clones(struct drm_device *dev, int type_mask) 571{ 572 int index_mask = 0; 573 struct drm_connector *connector; 574 int entry = 0; 575 576 list_for_each_entry(connector, &dev->mode_config.connector_list, 577 head) { 578 struct gma_encoder *gma_encoder = gma_attached_encoder(connector); 579 if (type_mask & (1 << gma_encoder->type)) 580 index_mask |= (1 << entry); 581 entry++; 582 } 583 return index_mask; 584} 585