1/* 2 * cx18 ADEC audio functions 3 * 4 * Derived from cx25840-audio.c 5 * 6 * Copyright (C) 2007 Hans Verkuil <hverkuil@xs4all.nl> 7 * Copyright (C) 2008 Andy Walls <awalls@md.metrocast.net> 8 * 9 * This program is free software; you can redistribute it and/or 10 * modify it under the terms of the GNU General Public License 11 * as published by the Free Software Foundation; either version 2 12 * of the License, or (at your option) any later version. 13 * 14 * This program is distributed in the hope that it will be useful, 15 * but WITHOUT ANY WARRANTY; without even the implied warranty of 16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 17 * GNU General Public License for more details. 18 * 19 * You should have received a copy of the GNU General Public License 20 * along with this program; if not, write to the Free Software 21 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 22 * 02110-1301, USA. 23 */ 24 25#include "cx18-driver.h" 26 27static int set_audclk_freq(struct cx18 *cx, u32 freq) 28{ 29 struct cx18_av_state *state = &cx->av_state; 30 31 if (freq != 32000 && freq != 44100 && freq != 48000) 32 return -EINVAL; 33 34 /* 35 * The PLL parameters are based on the external crystal frequency that 36 * would ideally be: 37 * 38 * NTSC Color subcarrier freq * 8 = 39 * 4.5 MHz/286 * 455/2 * 8 = 28.63636363... MHz 40 * 41 * The accidents of history and rationale that explain from where this 42 * combination of magic numbers originate can be found in: 43 * 44 * [1] Abrahams, I. C., "Choice of Chrominance Subcarrier Frequency in 45 * the NTSC Standards", Proceedings of the I-R-E, January 1954, pp 79-80 46 * 47 * [2] Abrahams, I. C., "The 'Frequency Interleaving' Principle in the 48 * NTSC Standards", Proceedings of the I-R-E, January 1954, pp 81-83 49 * 50 * As Mike Bradley has rightly pointed out, it's not the exact crystal 51 * frequency that matters, only that all parts of the driver and 52 * firmware are using the same value (close to the ideal value). 53 * 54 * Since I have a strong suspicion that, if the firmware ever assumes a 55 * crystal value at all, it will assume 28.636360 MHz, the crystal 56 * freq used in calculations in this driver will be: 57 * 58 * xtal_freq = 28.636360 MHz 59 * 60 * an error of less than 0.13 ppm which is way, way better than any off 61 * the shelf crystal will have for accuracy anyway. 62 * 63 * Below I aim to run the PLLs' VCOs near 400 MHz to minimze error. 64 * 65 * Many thanks to Jeff Campbell and Mike Bradley for their extensive 66 * investigation, experimentation, testing, and suggested solutions of 67 * of audio/video sync problems with SVideo and CVBS captures. 68 */ 69 70 if (state->aud_input > CX18_AV_AUDIO_SERIAL2) { 71 switch (freq) { 72 case 32000: 73 /* 74 * VID_PLL Integer = 0x0f, VID_PLL Post Divider = 0x04 75 * AUX_PLL Integer = 0x0d, AUX PLL Post Divider = 0x20 76 */ 77 cx18_av_write4(cx, 0x108, 0x200d040f); 78 79 /* VID_PLL Fraction = 0x2be2fe */ 80 /* xtal * 0xf.15f17f0/4 = 108 MHz: 432 MHz pre-postdiv*/ 81 cx18_av_write4(cx, 0x10c, 0x002be2fe); 82 83 /* AUX_PLL Fraction = 0x176740c */ 84 /* xtal * 0xd.bb3a060/0x20 = 32000 * 384: 393 MHz p-pd*/ 85 cx18_av_write4(cx, 0x110, 0x0176740c); 86 87 /* src3/4/6_ctl */ 88 /* 0x1.f77f = (4 * xtal/8*2/455) / 32000 */ 89 cx18_av_write4(cx, 0x900, 0x0801f77f); 90 cx18_av_write4(cx, 0x904, 0x0801f77f); 91 cx18_av_write4(cx, 0x90c, 0x0801f77f); 92 93 /* SA_MCLK_SEL=1, SA_MCLK_DIV=0x20 */ 94 cx18_av_write(cx, 0x127, 0x60); 95 96 /* AUD_COUNT = 0x2fff = 8 samples * 4 * 384 - 1 */ 97 cx18_av_write4(cx, 0x12c, 0x11202fff); 98 99 /* 100 * EN_AV_LOCK = 0 101 * VID_COUNT = 0x0d2ef8 = 107999.000 * 8 = 102 * ((8 samples/32,000) * (13,500,000 * 8) * 4 - 1) * 8 103 */ 104 cx18_av_write4(cx, 0x128, 0xa00d2ef8); 105 break; 106 107 case 44100: 108 /* 109 * VID_PLL Integer = 0x0f, VID_PLL Post Divider = 0x04 110 * AUX_PLL Integer = 0x0e, AUX PLL Post Divider = 0x18 111 */ 112 cx18_av_write4(cx, 0x108, 0x180e040f); 113 114 /* VID_PLL Fraction = 0x2be2fe */ 115 /* xtal * 0xf.15f17f0/4 = 108 MHz: 432 MHz pre-postdiv*/ 116 cx18_av_write4(cx, 0x10c, 0x002be2fe); 117 118 /* AUX_PLL Fraction = 0x062a1f2 */ 119 /* xtal * 0xe.3150f90/0x18 = 44100 * 384: 406 MHz p-pd*/ 120 cx18_av_write4(cx, 0x110, 0x0062a1f2); 121 122 /* src3/4/6_ctl */ 123 /* 0x1.6d59 = (4 * xtal/8*2/455) / 44100 */ 124 cx18_av_write4(cx, 0x900, 0x08016d59); 125 cx18_av_write4(cx, 0x904, 0x08016d59); 126 cx18_av_write4(cx, 0x90c, 0x08016d59); 127 128 /* SA_MCLK_SEL=1, SA_MCLK_DIV=0x18 */ 129 cx18_av_write(cx, 0x127, 0x58); 130 131 /* AUD_COUNT = 0x92ff = 49 samples * 2 * 384 - 1 */ 132 cx18_av_write4(cx, 0x12c, 0x112092ff); 133 134 /* 135 * EN_AV_LOCK = 0 136 * VID_COUNT = 0x1d4bf8 = 239999.000 * 8 = 137 * ((49 samples/44,100) * (13,500,000 * 8) * 2 - 1) * 8 138 */ 139 cx18_av_write4(cx, 0x128, 0xa01d4bf8); 140 break; 141 142 case 48000: 143 /* 144 * VID_PLL Integer = 0x0f, VID_PLL Post Divider = 0x04 145 * AUX_PLL Integer = 0x0e, AUX PLL Post Divider = 0x16 146 */ 147 cx18_av_write4(cx, 0x108, 0x160e040f); 148 149 /* VID_PLL Fraction = 0x2be2fe */ 150 /* xtal * 0xf.15f17f0/4 = 108 MHz: 432 MHz pre-postdiv*/ 151 cx18_av_write4(cx, 0x10c, 0x002be2fe); 152 153 /* AUX_PLL Fraction = 0x05227ad */ 154 /* xtal * 0xe.2913d68/0x16 = 48000 * 384: 406 MHz p-pd*/ 155 cx18_av_write4(cx, 0x110, 0x005227ad); 156 157 /* src3/4/6_ctl */ 158 /* 0x1.4faa = (4 * xtal/8*2/455) / 48000 */ 159 cx18_av_write4(cx, 0x900, 0x08014faa); 160 cx18_av_write4(cx, 0x904, 0x08014faa); 161 cx18_av_write4(cx, 0x90c, 0x08014faa); 162 163 /* SA_MCLK_SEL=1, SA_MCLK_DIV=0x16 */ 164 cx18_av_write(cx, 0x127, 0x56); 165 166 /* AUD_COUNT = 0x5fff = 4 samples * 16 * 384 - 1 */ 167 cx18_av_write4(cx, 0x12c, 0x11205fff); 168 169 /* 170 * EN_AV_LOCK = 0 171 * VID_COUNT = 0x1193f8 = 143999.000 * 8 = 172 * ((4 samples/48,000) * (13,500,000 * 8) * 16 - 1) * 8 173 */ 174 cx18_av_write4(cx, 0x128, 0xa01193f8); 175 break; 176 } 177 } else { 178 switch (freq) { 179 case 32000: 180 /* 181 * VID_PLL Integer = 0x0f, VID_PLL Post Divider = 0x04 182 * AUX_PLL Integer = 0x0d, AUX PLL Post Divider = 0x30 183 */ 184 cx18_av_write4(cx, 0x108, 0x300d040f); 185 186 /* VID_PLL Fraction = 0x2be2fe */ 187 /* xtal * 0xf.15f17f0/4 = 108 MHz: 432 MHz pre-postdiv*/ 188 cx18_av_write4(cx, 0x10c, 0x002be2fe); 189 190 /* AUX_PLL Fraction = 0x176740c */ 191 /* xtal * 0xd.bb3a060/0x30 = 32000 * 256: 393 MHz p-pd*/ 192 cx18_av_write4(cx, 0x110, 0x0176740c); 193 194 /* src1_ctl */ 195 /* 0x1.0000 = 32000/32000 */ 196 cx18_av_write4(cx, 0x8f8, 0x08010000); 197 198 /* src3/4/6_ctl */ 199 /* 0x2.0000 = 2 * (32000/32000) */ 200 cx18_av_write4(cx, 0x900, 0x08020000); 201 cx18_av_write4(cx, 0x904, 0x08020000); 202 cx18_av_write4(cx, 0x90c, 0x08020000); 203 204 /* SA_MCLK_SEL=1, SA_MCLK_DIV=0x30 */ 205 cx18_av_write(cx, 0x127, 0x70); 206 207 /* AUD_COUNT = 0x1fff = 8 samples * 4 * 256 - 1 */ 208 cx18_av_write4(cx, 0x12c, 0x11201fff); 209 210 /* 211 * EN_AV_LOCK = 0 212 * VID_COUNT = 0x0d2ef8 = 107999.000 * 8 = 213 * ((8 samples/32,000) * (13,500,000 * 8) * 4 - 1) * 8 214 */ 215 cx18_av_write4(cx, 0x128, 0xa00d2ef8); 216 break; 217 218 case 44100: 219 /* 220 * VID_PLL Integer = 0x0f, VID_PLL Post Divider = 0x04 221 * AUX_PLL Integer = 0x0e, AUX PLL Post Divider = 0x24 222 */ 223 cx18_av_write4(cx, 0x108, 0x240e040f); 224 225 /* VID_PLL Fraction = 0x2be2fe */ 226 /* xtal * 0xf.15f17f0/4 = 108 MHz: 432 MHz pre-postdiv*/ 227 cx18_av_write4(cx, 0x10c, 0x002be2fe); 228 229 /* AUX_PLL Fraction = 0x062a1f2 */ 230 /* xtal * 0xe.3150f90/0x24 = 44100 * 256: 406 MHz p-pd*/ 231 cx18_av_write4(cx, 0x110, 0x0062a1f2); 232 233 /* src1_ctl */ 234 /* 0x1.60cd = 44100/32000 */ 235 cx18_av_write4(cx, 0x8f8, 0x080160cd); 236 237 /* src3/4/6_ctl */ 238 /* 0x1.7385 = 2 * (32000/44100) */ 239 cx18_av_write4(cx, 0x900, 0x08017385); 240 cx18_av_write4(cx, 0x904, 0x08017385); 241 cx18_av_write4(cx, 0x90c, 0x08017385); 242 243 /* SA_MCLK_SEL=1, SA_MCLK_DIV=0x24 */ 244 cx18_av_write(cx, 0x127, 0x64); 245 246 /* AUD_COUNT = 0x61ff = 49 samples * 2 * 256 - 1 */ 247 cx18_av_write4(cx, 0x12c, 0x112061ff); 248 249 /* 250 * EN_AV_LOCK = 0 251 * VID_COUNT = 0x1d4bf8 = 239999.000 * 8 = 252 * ((49 samples/44,100) * (13,500,000 * 8) * 2 - 1) * 8 253 */ 254 cx18_av_write4(cx, 0x128, 0xa01d4bf8); 255 break; 256 257 case 48000: 258 /* 259 * VID_PLL Integer = 0x0f, VID_PLL Post Divider = 0x04 260 * AUX_PLL Integer = 0x0d, AUX PLL Post Divider = 0x20 261 */ 262 cx18_av_write4(cx, 0x108, 0x200d040f); 263 264 /* VID_PLL Fraction = 0x2be2fe */ 265 /* xtal * 0xf.15f17f0/4 = 108 MHz: 432 MHz pre-postdiv*/ 266 cx18_av_write4(cx, 0x10c, 0x002be2fe); 267 268 /* AUX_PLL Fraction = 0x176740c */ 269 /* xtal * 0xd.bb3a060/0x20 = 48000 * 256: 393 MHz p-pd*/ 270 cx18_av_write4(cx, 0x110, 0x0176740c); 271 272 /* src1_ctl */ 273 /* 0x1.8000 = 48000/32000 */ 274 cx18_av_write4(cx, 0x8f8, 0x08018000); 275 276 /* src3/4/6_ctl */ 277 /* 0x1.5555 = 2 * (32000/48000) */ 278 cx18_av_write4(cx, 0x900, 0x08015555); 279 cx18_av_write4(cx, 0x904, 0x08015555); 280 cx18_av_write4(cx, 0x90c, 0x08015555); 281 282 /* SA_MCLK_SEL=1, SA_MCLK_DIV=0x20 */ 283 cx18_av_write(cx, 0x127, 0x60); 284 285 /* AUD_COUNT = 0x3fff = 4 samples * 16 * 256 - 1 */ 286 cx18_av_write4(cx, 0x12c, 0x11203fff); 287 288 /* 289 * EN_AV_LOCK = 0 290 * VID_COUNT = 0x1193f8 = 143999.000 * 8 = 291 * ((4 samples/48,000) * (13,500,000 * 8) * 16 - 1) * 8 292 */ 293 cx18_av_write4(cx, 0x128, 0xa01193f8); 294 break; 295 } 296 } 297 298 state->audclk_freq = freq; 299 300 return 0; 301} 302 303void cx18_av_audio_set_path(struct cx18 *cx) 304{ 305 struct cx18_av_state *state = &cx->av_state; 306 u8 v; 307 308 /* stop microcontroller */ 309 v = cx18_av_read(cx, 0x803) & ~0x10; 310 cx18_av_write_expect(cx, 0x803, v, v, 0x1f); 311 312 /* assert soft reset */ 313 v = cx18_av_read(cx, 0x810) | 0x01; 314 cx18_av_write_expect(cx, 0x810, v, v, 0x0f); 315 316 /* Mute everything to prevent the PFFT! */ 317 cx18_av_write(cx, 0x8d3, 0x1f); 318 319 if (state->aud_input <= CX18_AV_AUDIO_SERIAL2) { 320 /* Set Path1 to Serial Audio Input */ 321 cx18_av_write4(cx, 0x8d0, 0x01011012); 322 323 /* The microcontroller should not be started for the 324 * non-tuner inputs: autodetection is specific for 325 * TV audio. */ 326 } else { 327 /* Set Path1 to Analog Demod Main Channel */ 328 cx18_av_write4(cx, 0x8d0, 0x1f063870); 329 } 330 331 set_audclk_freq(cx, state->audclk_freq); 332 333 /* deassert soft reset */ 334 v = cx18_av_read(cx, 0x810) & ~0x01; 335 cx18_av_write_expect(cx, 0x810, v, v, 0x0f); 336 337 if (state->aud_input > CX18_AV_AUDIO_SERIAL2) { 338 /* When the microcontroller detects the 339 * audio format, it will unmute the lines */ 340 v = cx18_av_read(cx, 0x803) | 0x10; 341 cx18_av_write_expect(cx, 0x803, v, v, 0x1f); 342 } 343} 344 345static void set_volume(struct cx18 *cx, int volume) 346{ 347 /* First convert the volume to msp3400 values (0-127) */ 348 int vol = volume >> 9; 349 /* now scale it up to cx18_av values 350 * -114dB to -96dB maps to 0 351 * this should be 19, but in my testing that was 4dB too loud */ 352 if (vol <= 23) 353 vol = 0; 354 else 355 vol -= 23; 356 357 /* PATH1_VOLUME */ 358 cx18_av_write(cx, 0x8d4, 228 - (vol * 2)); 359} 360 361static void set_bass(struct cx18 *cx, int bass) 362{ 363 /* PATH1_EQ_BASS_VOL */ 364 cx18_av_and_or(cx, 0x8d9, ~0x3f, 48 - (bass * 48 / 0xffff)); 365} 366 367static void set_treble(struct cx18 *cx, int treble) 368{ 369 /* PATH1_EQ_TREBLE_VOL */ 370 cx18_av_and_or(cx, 0x8db, ~0x3f, 48 - (treble * 48 / 0xffff)); 371} 372 373static void set_balance(struct cx18 *cx, int balance) 374{ 375 int bal = balance >> 8; 376 if (bal > 0x80) { 377 /* PATH1_BAL_LEFT */ 378 cx18_av_and_or(cx, 0x8d5, 0x7f, 0x80); 379 /* PATH1_BAL_LEVEL */ 380 cx18_av_and_or(cx, 0x8d5, ~0x7f, bal & 0x7f); 381 } else { 382 /* PATH1_BAL_LEFT */ 383 cx18_av_and_or(cx, 0x8d5, 0x7f, 0x00); 384 /* PATH1_BAL_LEVEL */ 385 cx18_av_and_or(cx, 0x8d5, ~0x7f, 0x80 - bal); 386 } 387} 388 389static void set_mute(struct cx18 *cx, int mute) 390{ 391 struct cx18_av_state *state = &cx->av_state; 392 u8 v; 393 394 if (state->aud_input > CX18_AV_AUDIO_SERIAL2) { 395 /* Must turn off microcontroller in order to mute sound. 396 * Not sure if this is the best method, but it does work. 397 * If the microcontroller is running, then it will undo any 398 * changes to the mute register. */ 399 v = cx18_av_read(cx, 0x803); 400 if (mute) { 401 /* disable microcontroller */ 402 v &= ~0x10; 403 cx18_av_write_expect(cx, 0x803, v, v, 0x1f); 404 cx18_av_write(cx, 0x8d3, 0x1f); 405 } else { 406 /* enable microcontroller */ 407 v |= 0x10; 408 cx18_av_write_expect(cx, 0x803, v, v, 0x1f); 409 } 410 } else { 411 /* SRC1_MUTE_EN */ 412 cx18_av_and_or(cx, 0x8d3, ~0x2, mute ? 0x02 : 0x00); 413 } 414} 415 416int cx18_av_s_clock_freq(struct v4l2_subdev *sd, u32 freq) 417{ 418 struct cx18 *cx = v4l2_get_subdevdata(sd); 419 struct cx18_av_state *state = &cx->av_state; 420 int retval; 421 u8 v; 422 423 if (state->aud_input > CX18_AV_AUDIO_SERIAL2) { 424 v = cx18_av_read(cx, 0x803) & ~0x10; 425 cx18_av_write_expect(cx, 0x803, v, v, 0x1f); 426 cx18_av_write(cx, 0x8d3, 0x1f); 427 } 428 v = cx18_av_read(cx, 0x810) | 0x1; 429 cx18_av_write_expect(cx, 0x810, v, v, 0x0f); 430 431 retval = set_audclk_freq(cx, freq); 432 433 v = cx18_av_read(cx, 0x810) & ~0x1; 434 cx18_av_write_expect(cx, 0x810, v, v, 0x0f); 435 if (state->aud_input > CX18_AV_AUDIO_SERIAL2) { 436 v = cx18_av_read(cx, 0x803) | 0x10; 437 cx18_av_write_expect(cx, 0x803, v, v, 0x1f); 438 } 439 return retval; 440} 441 442static int cx18_av_audio_s_ctrl(struct v4l2_ctrl *ctrl) 443{ 444 struct v4l2_subdev *sd = to_sd(ctrl); 445 struct cx18 *cx = v4l2_get_subdevdata(sd); 446 447 switch (ctrl->id) { 448 case V4L2_CID_AUDIO_VOLUME: 449 set_volume(cx, ctrl->val); 450 break; 451 case V4L2_CID_AUDIO_BASS: 452 set_bass(cx, ctrl->val); 453 break; 454 case V4L2_CID_AUDIO_TREBLE: 455 set_treble(cx, ctrl->val); 456 break; 457 case V4L2_CID_AUDIO_BALANCE: 458 set_balance(cx, ctrl->val); 459 break; 460 case V4L2_CID_AUDIO_MUTE: 461 set_mute(cx, ctrl->val); 462 break; 463 default: 464 return -EINVAL; 465 } 466 return 0; 467} 468 469const struct v4l2_ctrl_ops cx18_av_audio_ctrl_ops = { 470 .s_ctrl = cx18_av_audio_s_ctrl, 471}; 472