[go: nahoru, domu]

1/*
2 *  drivers/mtd/nand_bbt.c
3 *
4 *  Overview:
5 *   Bad block table support for the NAND driver
6 *
7 *  Copyright © 2004 Thomas Gleixner (tglx@linutronix.de)
8 *
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License version 2 as
11 * published by the Free Software Foundation.
12 *
13 * Description:
14 *
15 * When nand_scan_bbt is called, then it tries to find the bad block table
16 * depending on the options in the BBT descriptor(s). If no flash based BBT
17 * (NAND_BBT_USE_FLASH) is specified then the device is scanned for factory
18 * marked good / bad blocks. This information is used to create a memory BBT.
19 * Once a new bad block is discovered then the "factory" information is updated
20 * on the device.
21 * If a flash based BBT is specified then the function first tries to find the
22 * BBT on flash. If a BBT is found then the contents are read and the memory
23 * based BBT is created. If a mirrored BBT is selected then the mirror is
24 * searched too and the versions are compared. If the mirror has a greater
25 * version number, then the mirror BBT is used to build the memory based BBT.
26 * If the tables are not versioned, then we "or" the bad block information.
27 * If one of the BBTs is out of date or does not exist it is (re)created.
28 * If no BBT exists at all then the device is scanned for factory marked
29 * good / bad blocks and the bad block tables are created.
30 *
31 * For manufacturer created BBTs like the one found on M-SYS DOC devices
32 * the BBT is searched and read but never created
33 *
34 * The auto generated bad block table is located in the last good blocks
35 * of the device. The table is mirrored, so it can be updated eventually.
36 * The table is marked in the OOB area with an ident pattern and a version
37 * number which indicates which of both tables is more up to date. If the NAND
38 * controller needs the complete OOB area for the ECC information then the
39 * option NAND_BBT_NO_OOB should be used (along with NAND_BBT_USE_FLASH, of
40 * course): it moves the ident pattern and the version byte into the data area
41 * and the OOB area will remain untouched.
42 *
43 * The table uses 2 bits per block
44 * 11b:		block is good
45 * 00b:		block is factory marked bad
46 * 01b, 10b:	block is marked bad due to wear
47 *
48 * The memory bad block table uses the following scheme:
49 * 00b:		block is good
50 * 01b:		block is marked bad due to wear
51 * 10b:		block is reserved (to protect the bbt area)
52 * 11b:		block is factory marked bad
53 *
54 * Multichip devices like DOC store the bad block info per floor.
55 *
56 * Following assumptions are made:
57 * - bbts start at a page boundary, if autolocated on a block boundary
58 * - the space necessary for a bbt in FLASH does not exceed a block boundary
59 *
60 */
61
62#include <linux/slab.h>
63#include <linux/types.h>
64#include <linux/mtd/mtd.h>
65#include <linux/mtd/bbm.h>
66#include <linux/mtd/nand.h>
67#include <linux/mtd/nand_ecc.h>
68#include <linux/bitops.h>
69#include <linux/delay.h>
70#include <linux/vmalloc.h>
71#include <linux/export.h>
72#include <linux/string.h>
73
74#define BBT_BLOCK_GOOD		0x00
75#define BBT_BLOCK_WORN		0x01
76#define BBT_BLOCK_RESERVED	0x02
77#define BBT_BLOCK_FACTORY_BAD	0x03
78
79#define BBT_ENTRY_MASK		0x03
80#define BBT_ENTRY_SHIFT		2
81
82static int nand_update_bbt(struct mtd_info *mtd, loff_t offs);
83
84static inline uint8_t bbt_get_entry(struct nand_chip *chip, int block)
85{
86	uint8_t entry = chip->bbt[block >> BBT_ENTRY_SHIFT];
87	entry >>= (block & BBT_ENTRY_MASK) * 2;
88	return entry & BBT_ENTRY_MASK;
89}
90
91static inline void bbt_mark_entry(struct nand_chip *chip, int block,
92		uint8_t mark)
93{
94	uint8_t msk = (mark & BBT_ENTRY_MASK) << ((block & BBT_ENTRY_MASK) * 2);
95	chip->bbt[block >> BBT_ENTRY_SHIFT] |= msk;
96}
97
98static int check_pattern_no_oob(uint8_t *buf, struct nand_bbt_descr *td)
99{
100	if (memcmp(buf, td->pattern, td->len))
101		return -1;
102	return 0;
103}
104
105/**
106 * check_pattern - [GENERIC] check if a pattern is in the buffer
107 * @buf: the buffer to search
108 * @len: the length of buffer to search
109 * @paglen: the pagelength
110 * @td: search pattern descriptor
111 *
112 * Check for a pattern at the given place. Used to search bad block tables and
113 * good / bad block identifiers.
114 */
115static int check_pattern(uint8_t *buf, int len, int paglen, struct nand_bbt_descr *td)
116{
117	if (td->options & NAND_BBT_NO_OOB)
118		return check_pattern_no_oob(buf, td);
119
120	/* Compare the pattern */
121	if (memcmp(buf + paglen + td->offs, td->pattern, td->len))
122		return -1;
123
124	return 0;
125}
126
127/**
128 * check_short_pattern - [GENERIC] check if a pattern is in the buffer
129 * @buf: the buffer to search
130 * @td:	search pattern descriptor
131 *
132 * Check for a pattern at the given place. Used to search bad block tables and
133 * good / bad block identifiers. Same as check_pattern, but no optional empty
134 * check.
135 */
136static int check_short_pattern(uint8_t *buf, struct nand_bbt_descr *td)
137{
138	/* Compare the pattern */
139	if (memcmp(buf + td->offs, td->pattern, td->len))
140		return -1;
141	return 0;
142}
143
144/**
145 * add_marker_len - compute the length of the marker in data area
146 * @td: BBT descriptor used for computation
147 *
148 * The length will be 0 if the marker is located in OOB area.
149 */
150static u32 add_marker_len(struct nand_bbt_descr *td)
151{
152	u32 len;
153
154	if (!(td->options & NAND_BBT_NO_OOB))
155		return 0;
156
157	len = td->len;
158	if (td->options & NAND_BBT_VERSION)
159		len++;
160	return len;
161}
162
163/**
164 * read_bbt - [GENERIC] Read the bad block table starting from page
165 * @mtd: MTD device structure
166 * @buf: temporary buffer
167 * @page: the starting page
168 * @num: the number of bbt descriptors to read
169 * @td: the bbt describtion table
170 * @offs: block number offset in the table
171 *
172 * Read the bad block table starting from page.
173 */
174static int read_bbt(struct mtd_info *mtd, uint8_t *buf, int page, int num,
175		struct nand_bbt_descr *td, int offs)
176{
177	int res, ret = 0, i, j, act = 0;
178	struct nand_chip *this = mtd->priv;
179	size_t retlen, len, totlen;
180	loff_t from;
181	int bits = td->options & NAND_BBT_NRBITS_MSK;
182	uint8_t msk = (uint8_t)((1 << bits) - 1);
183	u32 marker_len;
184	int reserved_block_code = td->reserved_block_code;
185
186	totlen = (num * bits) >> 3;
187	marker_len = add_marker_len(td);
188	from = ((loff_t)page) << this->page_shift;
189
190	while (totlen) {
191		len = min(totlen, (size_t)(1 << this->bbt_erase_shift));
192		if (marker_len) {
193			/*
194			 * In case the BBT marker is not in the OOB area it
195			 * will be just in the first page.
196			 */
197			len -= marker_len;
198			from += marker_len;
199			marker_len = 0;
200		}
201		res = mtd_read(mtd, from, len, &retlen, buf);
202		if (res < 0) {
203			if (mtd_is_eccerr(res)) {
204				pr_info("nand_bbt: ECC error in BBT at 0x%012llx\n",
205					from & ~mtd->writesize);
206				return res;
207			} else if (mtd_is_bitflip(res)) {
208				pr_info("nand_bbt: corrected error in BBT at 0x%012llx\n",
209					from & ~mtd->writesize);
210				ret = res;
211			} else {
212				pr_info("nand_bbt: error reading BBT\n");
213				return res;
214			}
215		}
216
217		/* Analyse data */
218		for (i = 0; i < len; i++) {
219			uint8_t dat = buf[i];
220			for (j = 0; j < 8; j += bits, act++) {
221				uint8_t tmp = (dat >> j) & msk;
222				if (tmp == msk)
223					continue;
224				if (reserved_block_code && (tmp == reserved_block_code)) {
225					pr_info("nand_read_bbt: reserved block at 0x%012llx\n",
226						 (loff_t)(offs + act) <<
227						 this->bbt_erase_shift);
228					bbt_mark_entry(this, offs + act,
229							BBT_BLOCK_RESERVED);
230					mtd->ecc_stats.bbtblocks++;
231					continue;
232				}
233				/*
234				 * Leave it for now, if it's matured we can
235				 * move this message to pr_debug.
236				 */
237				pr_info("nand_read_bbt: bad block at 0x%012llx\n",
238					 (loff_t)(offs + act) <<
239					 this->bbt_erase_shift);
240				/* Factory marked bad or worn out? */
241				if (tmp == 0)
242					bbt_mark_entry(this, offs + act,
243							BBT_BLOCK_FACTORY_BAD);
244				else
245					bbt_mark_entry(this, offs + act,
246							BBT_BLOCK_WORN);
247				mtd->ecc_stats.badblocks++;
248			}
249		}
250		totlen -= len;
251		from += len;
252	}
253	return ret;
254}
255
256/**
257 * read_abs_bbt - [GENERIC] Read the bad block table starting at a given page
258 * @mtd: MTD device structure
259 * @buf: temporary buffer
260 * @td: descriptor for the bad block table
261 * @chip: read the table for a specific chip, -1 read all chips; applies only if
262 *        NAND_BBT_PERCHIP option is set
263 *
264 * Read the bad block table for all chips starting at a given page. We assume
265 * that the bbt bits are in consecutive order.
266 */
267static int read_abs_bbt(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr *td, int chip)
268{
269	struct nand_chip *this = mtd->priv;
270	int res = 0, i;
271
272	if (td->options & NAND_BBT_PERCHIP) {
273		int offs = 0;
274		for (i = 0; i < this->numchips; i++) {
275			if (chip == -1 || chip == i)
276				res = read_bbt(mtd, buf, td->pages[i],
277					this->chipsize >> this->bbt_erase_shift,
278					td, offs);
279			if (res)
280				return res;
281			offs += this->chipsize >> this->bbt_erase_shift;
282		}
283	} else {
284		res = read_bbt(mtd, buf, td->pages[0],
285				mtd->size >> this->bbt_erase_shift, td, 0);
286		if (res)
287			return res;
288	}
289	return 0;
290}
291
292/* BBT marker is in the first page, no OOB */
293static int scan_read_data(struct mtd_info *mtd, uint8_t *buf, loff_t offs,
294			 struct nand_bbt_descr *td)
295{
296	size_t retlen;
297	size_t len;
298
299	len = td->len;
300	if (td->options & NAND_BBT_VERSION)
301		len++;
302
303	return mtd_read(mtd, offs, len, &retlen, buf);
304}
305
306/**
307 * scan_read_oob - [GENERIC] Scan data+OOB region to buffer
308 * @mtd: MTD device structure
309 * @buf: temporary buffer
310 * @offs: offset at which to scan
311 * @len: length of data region to read
312 *
313 * Scan read data from data+OOB. May traverse multiple pages, interleaving
314 * page,OOB,page,OOB,... in buf. Completes transfer and returns the "strongest"
315 * ECC condition (error or bitflip). May quit on the first (non-ECC) error.
316 */
317static int scan_read_oob(struct mtd_info *mtd, uint8_t *buf, loff_t offs,
318			 size_t len)
319{
320	struct mtd_oob_ops ops;
321	int res, ret = 0;
322
323	ops.mode = MTD_OPS_PLACE_OOB;
324	ops.ooboffs = 0;
325	ops.ooblen = mtd->oobsize;
326
327	while (len > 0) {
328		ops.datbuf = buf;
329		ops.len = min(len, (size_t)mtd->writesize);
330		ops.oobbuf = buf + ops.len;
331
332		res = mtd_read_oob(mtd, offs, &ops);
333		if (res) {
334			if (!mtd_is_bitflip_or_eccerr(res))
335				return res;
336			else if (mtd_is_eccerr(res) || !ret)
337				ret = res;
338		}
339
340		buf += mtd->oobsize + mtd->writesize;
341		len -= mtd->writesize;
342		offs += mtd->writesize;
343	}
344	return ret;
345}
346
347static int scan_read(struct mtd_info *mtd, uint8_t *buf, loff_t offs,
348			 size_t len, struct nand_bbt_descr *td)
349{
350	if (td->options & NAND_BBT_NO_OOB)
351		return scan_read_data(mtd, buf, offs, td);
352	else
353		return scan_read_oob(mtd, buf, offs, len);
354}
355
356/* Scan write data with oob to flash */
357static int scan_write_bbt(struct mtd_info *mtd, loff_t offs, size_t len,
358			  uint8_t *buf, uint8_t *oob)
359{
360	struct mtd_oob_ops ops;
361
362	ops.mode = MTD_OPS_PLACE_OOB;
363	ops.ooboffs = 0;
364	ops.ooblen = mtd->oobsize;
365	ops.datbuf = buf;
366	ops.oobbuf = oob;
367	ops.len = len;
368
369	return mtd_write_oob(mtd, offs, &ops);
370}
371
372static u32 bbt_get_ver_offs(struct mtd_info *mtd, struct nand_bbt_descr *td)
373{
374	u32 ver_offs = td->veroffs;
375
376	if (!(td->options & NAND_BBT_NO_OOB))
377		ver_offs += mtd->writesize;
378	return ver_offs;
379}
380
381/**
382 * read_abs_bbts - [GENERIC] Read the bad block table(s) for all chips starting at a given page
383 * @mtd: MTD device structure
384 * @buf: temporary buffer
385 * @td: descriptor for the bad block table
386 * @md:	descriptor for the bad block table mirror
387 *
388 * Read the bad block table(s) for all chips starting at a given page. We
389 * assume that the bbt bits are in consecutive order.
390 */
391static void read_abs_bbts(struct mtd_info *mtd, uint8_t *buf,
392			  struct nand_bbt_descr *td, struct nand_bbt_descr *md)
393{
394	struct nand_chip *this = mtd->priv;
395
396	/* Read the primary version, if available */
397	if (td->options & NAND_BBT_VERSION) {
398		scan_read(mtd, buf, (loff_t)td->pages[0] << this->page_shift,
399			      mtd->writesize, td);
400		td->version[0] = buf[bbt_get_ver_offs(mtd, td)];
401		pr_info("Bad block table at page %d, version 0x%02X\n",
402			 td->pages[0], td->version[0]);
403	}
404
405	/* Read the mirror version, if available */
406	if (md && (md->options & NAND_BBT_VERSION)) {
407		scan_read(mtd, buf, (loff_t)md->pages[0] << this->page_shift,
408			      mtd->writesize, md);
409		md->version[0] = buf[bbt_get_ver_offs(mtd, md)];
410		pr_info("Bad block table at page %d, version 0x%02X\n",
411			 md->pages[0], md->version[0]);
412	}
413}
414
415/* Scan a given block partially */
416static int scan_block_fast(struct mtd_info *mtd, struct nand_bbt_descr *bd,
417			   loff_t offs, uint8_t *buf, int numpages)
418{
419	struct mtd_oob_ops ops;
420	int j, ret;
421
422	ops.ooblen = mtd->oobsize;
423	ops.oobbuf = buf;
424	ops.ooboffs = 0;
425	ops.datbuf = NULL;
426	ops.mode = MTD_OPS_PLACE_OOB;
427
428	for (j = 0; j < numpages; j++) {
429		/*
430		 * Read the full oob until read_oob is fixed to handle single
431		 * byte reads for 16 bit buswidth.
432		 */
433		ret = mtd_read_oob(mtd, offs, &ops);
434		/* Ignore ECC errors when checking for BBM */
435		if (ret && !mtd_is_bitflip_or_eccerr(ret))
436			return ret;
437
438		if (check_short_pattern(buf, bd))
439			return 1;
440
441		offs += mtd->writesize;
442	}
443	return 0;
444}
445
446/**
447 * create_bbt - [GENERIC] Create a bad block table by scanning the device
448 * @mtd: MTD device structure
449 * @buf: temporary buffer
450 * @bd: descriptor for the good/bad block search pattern
451 * @chip: create the table for a specific chip, -1 read all chips; applies only
452 *        if NAND_BBT_PERCHIP option is set
453 *
454 * Create a bad block table by scanning the device for the given good/bad block
455 * identify pattern.
456 */
457static int create_bbt(struct mtd_info *mtd, uint8_t *buf,
458	struct nand_bbt_descr *bd, int chip)
459{
460	struct nand_chip *this = mtd->priv;
461	int i, numblocks, numpages;
462	int startblock;
463	loff_t from;
464
465	pr_info("Scanning device for bad blocks\n");
466
467	if (bd->options & NAND_BBT_SCAN2NDPAGE)
468		numpages = 2;
469	else
470		numpages = 1;
471
472	if (chip == -1) {
473		numblocks = mtd->size >> this->bbt_erase_shift;
474		startblock = 0;
475		from = 0;
476	} else {
477		if (chip >= this->numchips) {
478			pr_warn("create_bbt(): chipnr (%d) > available chips (%d)\n",
479			       chip + 1, this->numchips);
480			return -EINVAL;
481		}
482		numblocks = this->chipsize >> this->bbt_erase_shift;
483		startblock = chip * numblocks;
484		numblocks += startblock;
485		from = (loff_t)startblock << this->bbt_erase_shift;
486	}
487
488	if (this->bbt_options & NAND_BBT_SCANLASTPAGE)
489		from += mtd->erasesize - (mtd->writesize * numpages);
490
491	for (i = startblock; i < numblocks; i++) {
492		int ret;
493
494		BUG_ON(bd->options & NAND_BBT_NO_OOB);
495
496		ret = scan_block_fast(mtd, bd, from, buf, numpages);
497		if (ret < 0)
498			return ret;
499
500		if (ret) {
501			bbt_mark_entry(this, i, BBT_BLOCK_FACTORY_BAD);
502			pr_warn("Bad eraseblock %d at 0x%012llx\n",
503				i, (unsigned long long)from);
504			mtd->ecc_stats.badblocks++;
505		}
506
507		from += (1 << this->bbt_erase_shift);
508	}
509	return 0;
510}
511
512/**
513 * search_bbt - [GENERIC] scan the device for a specific bad block table
514 * @mtd: MTD device structure
515 * @buf: temporary buffer
516 * @td: descriptor for the bad block table
517 *
518 * Read the bad block table by searching for a given ident pattern. Search is
519 * preformed either from the beginning up or from the end of the device
520 * downwards. The search starts always at the start of a block. If the option
521 * NAND_BBT_PERCHIP is given, each chip is searched for a bbt, which contains
522 * the bad block information of this chip. This is necessary to provide support
523 * for certain DOC devices.
524 *
525 * The bbt ident pattern resides in the oob area of the first page in a block.
526 */
527static int search_bbt(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr *td)
528{
529	struct nand_chip *this = mtd->priv;
530	int i, chips;
531	int startblock, block, dir;
532	int scanlen = mtd->writesize + mtd->oobsize;
533	int bbtblocks;
534	int blocktopage = this->bbt_erase_shift - this->page_shift;
535
536	/* Search direction top -> down? */
537	if (td->options & NAND_BBT_LASTBLOCK) {
538		startblock = (mtd->size >> this->bbt_erase_shift) - 1;
539		dir = -1;
540	} else {
541		startblock = 0;
542		dir = 1;
543	}
544
545	/* Do we have a bbt per chip? */
546	if (td->options & NAND_BBT_PERCHIP) {
547		chips = this->numchips;
548		bbtblocks = this->chipsize >> this->bbt_erase_shift;
549		startblock &= bbtblocks - 1;
550	} else {
551		chips = 1;
552		bbtblocks = mtd->size >> this->bbt_erase_shift;
553	}
554
555	for (i = 0; i < chips; i++) {
556		/* Reset version information */
557		td->version[i] = 0;
558		td->pages[i] = -1;
559		/* Scan the maximum number of blocks */
560		for (block = 0; block < td->maxblocks; block++) {
561
562			int actblock = startblock + dir * block;
563			loff_t offs = (loff_t)actblock << this->bbt_erase_shift;
564
565			/* Read first page */
566			scan_read(mtd, buf, offs, mtd->writesize, td);
567			if (!check_pattern(buf, scanlen, mtd->writesize, td)) {
568				td->pages[i] = actblock << blocktopage;
569				if (td->options & NAND_BBT_VERSION) {
570					offs = bbt_get_ver_offs(mtd, td);
571					td->version[i] = buf[offs];
572				}
573				break;
574			}
575		}
576		startblock += this->chipsize >> this->bbt_erase_shift;
577	}
578	/* Check, if we found a bbt for each requested chip */
579	for (i = 0; i < chips; i++) {
580		if (td->pages[i] == -1)
581			pr_warn("Bad block table not found for chip %d\n", i);
582		else
583			pr_info("Bad block table found at page %d, version 0x%02X\n",
584				td->pages[i], td->version[i]);
585	}
586	return 0;
587}
588
589/**
590 * search_read_bbts - [GENERIC] scan the device for bad block table(s)
591 * @mtd: MTD device structure
592 * @buf: temporary buffer
593 * @td: descriptor for the bad block table
594 * @md: descriptor for the bad block table mirror
595 *
596 * Search and read the bad block table(s).
597 */
598static void search_read_bbts(struct mtd_info *mtd, uint8_t *buf,
599			     struct nand_bbt_descr *td,
600			     struct nand_bbt_descr *md)
601{
602	/* Search the primary table */
603	search_bbt(mtd, buf, td);
604
605	/* Search the mirror table */
606	if (md)
607		search_bbt(mtd, buf, md);
608}
609
610/**
611 * write_bbt - [GENERIC] (Re)write the bad block table
612 * @mtd: MTD device structure
613 * @buf: temporary buffer
614 * @td: descriptor for the bad block table
615 * @md: descriptor for the bad block table mirror
616 * @chipsel: selector for a specific chip, -1 for all
617 *
618 * (Re)write the bad block table.
619 */
620static int write_bbt(struct mtd_info *mtd, uint8_t *buf,
621		     struct nand_bbt_descr *td, struct nand_bbt_descr *md,
622		     int chipsel)
623{
624	struct nand_chip *this = mtd->priv;
625	struct erase_info einfo;
626	int i, res, chip = 0;
627	int bits, startblock, dir, page, offs, numblocks, sft, sftmsk;
628	int nrchips, pageoffs, ooboffs;
629	uint8_t msk[4];
630	uint8_t rcode = td->reserved_block_code;
631	size_t retlen, len = 0;
632	loff_t to;
633	struct mtd_oob_ops ops;
634
635	ops.ooblen = mtd->oobsize;
636	ops.ooboffs = 0;
637	ops.datbuf = NULL;
638	ops.mode = MTD_OPS_PLACE_OOB;
639
640	if (!rcode)
641		rcode = 0xff;
642	/* Write bad block table per chip rather than per device? */
643	if (td->options & NAND_BBT_PERCHIP) {
644		numblocks = (int)(this->chipsize >> this->bbt_erase_shift);
645		/* Full device write or specific chip? */
646		if (chipsel == -1) {
647			nrchips = this->numchips;
648		} else {
649			nrchips = chipsel + 1;
650			chip = chipsel;
651		}
652	} else {
653		numblocks = (int)(mtd->size >> this->bbt_erase_shift);
654		nrchips = 1;
655	}
656
657	/* Loop through the chips */
658	for (; chip < nrchips; chip++) {
659		/*
660		 * There was already a version of the table, reuse the page
661		 * This applies for absolute placement too, as we have the
662		 * page nr. in td->pages.
663		 */
664		if (td->pages[chip] != -1) {
665			page = td->pages[chip];
666			goto write;
667		}
668
669		/*
670		 * Automatic placement of the bad block table. Search direction
671		 * top -> down?
672		 */
673		if (td->options & NAND_BBT_LASTBLOCK) {
674			startblock = numblocks * (chip + 1) - 1;
675			dir = -1;
676		} else {
677			startblock = chip * numblocks;
678			dir = 1;
679		}
680
681		for (i = 0; i < td->maxblocks; i++) {
682			int block = startblock + dir * i;
683			/* Check, if the block is bad */
684			switch (bbt_get_entry(this, block)) {
685			case BBT_BLOCK_WORN:
686			case BBT_BLOCK_FACTORY_BAD:
687				continue;
688			}
689			page = block <<
690				(this->bbt_erase_shift - this->page_shift);
691			/* Check, if the block is used by the mirror table */
692			if (!md || md->pages[chip] != page)
693				goto write;
694		}
695		pr_err("No space left to write bad block table\n");
696		return -ENOSPC;
697	write:
698
699		/* Set up shift count and masks for the flash table */
700		bits = td->options & NAND_BBT_NRBITS_MSK;
701		msk[2] = ~rcode;
702		switch (bits) {
703		case 1: sft = 3; sftmsk = 0x07; msk[0] = 0x00; msk[1] = 0x01;
704			msk[3] = 0x01;
705			break;
706		case 2: sft = 2; sftmsk = 0x06; msk[0] = 0x00; msk[1] = 0x01;
707			msk[3] = 0x03;
708			break;
709		case 4: sft = 1; sftmsk = 0x04; msk[0] = 0x00; msk[1] = 0x0C;
710			msk[3] = 0x0f;
711			break;
712		case 8: sft = 0; sftmsk = 0x00; msk[0] = 0x00; msk[1] = 0x0F;
713			msk[3] = 0xff;
714			break;
715		default: return -EINVAL;
716		}
717
718		to = ((loff_t)page) << this->page_shift;
719
720		/* Must we save the block contents? */
721		if (td->options & NAND_BBT_SAVECONTENT) {
722			/* Make it block aligned */
723			to &= ~((loff_t)((1 << this->bbt_erase_shift) - 1));
724			len = 1 << this->bbt_erase_shift;
725			res = mtd_read(mtd, to, len, &retlen, buf);
726			if (res < 0) {
727				if (retlen != len) {
728					pr_info("nand_bbt: error reading block for writing the bad block table\n");
729					return res;
730				}
731				pr_warn("nand_bbt: ECC error while reading block for writing bad block table\n");
732			}
733			/* Read oob data */
734			ops.ooblen = (len >> this->page_shift) * mtd->oobsize;
735			ops.oobbuf = &buf[len];
736			res = mtd_read_oob(mtd, to + mtd->writesize, &ops);
737			if (res < 0 || ops.oobretlen != ops.ooblen)
738				goto outerr;
739
740			/* Calc the byte offset in the buffer */
741			pageoffs = page - (int)(to >> this->page_shift);
742			offs = pageoffs << this->page_shift;
743			/* Preset the bbt area with 0xff */
744			memset(&buf[offs], 0xff, (size_t)(numblocks >> sft));
745			ooboffs = len + (pageoffs * mtd->oobsize);
746
747		} else if (td->options & NAND_BBT_NO_OOB) {
748			ooboffs = 0;
749			offs = td->len;
750			/* The version byte */
751			if (td->options & NAND_BBT_VERSION)
752				offs++;
753			/* Calc length */
754			len = (size_t)(numblocks >> sft);
755			len += offs;
756			/* Make it page aligned! */
757			len = ALIGN(len, mtd->writesize);
758			/* Preset the buffer with 0xff */
759			memset(buf, 0xff, len);
760			/* Pattern is located at the begin of first page */
761			memcpy(buf, td->pattern, td->len);
762		} else {
763			/* Calc length */
764			len = (size_t)(numblocks >> sft);
765			/* Make it page aligned! */
766			len = ALIGN(len, mtd->writesize);
767			/* Preset the buffer with 0xff */
768			memset(buf, 0xff, len +
769			       (len >> this->page_shift)* mtd->oobsize);
770			offs = 0;
771			ooboffs = len;
772			/* Pattern is located in oob area of first page */
773			memcpy(&buf[ooboffs + td->offs], td->pattern, td->len);
774		}
775
776		if (td->options & NAND_BBT_VERSION)
777			buf[ooboffs + td->veroffs] = td->version[chip];
778
779		/* Walk through the memory table */
780		for (i = 0; i < numblocks; i++) {
781			uint8_t dat;
782			int sftcnt = (i << (3 - sft)) & sftmsk;
783			dat = bbt_get_entry(this, chip * numblocks + i);
784			/* Do not store the reserved bbt blocks! */
785			buf[offs + (i >> sft)] &= ~(msk[dat] << sftcnt);
786		}
787
788		memset(&einfo, 0, sizeof(einfo));
789		einfo.mtd = mtd;
790		einfo.addr = to;
791		einfo.len = 1 << this->bbt_erase_shift;
792		res = nand_erase_nand(mtd, &einfo, 1);
793		if (res < 0)
794			goto outerr;
795
796		res = scan_write_bbt(mtd, to, len, buf,
797				td->options & NAND_BBT_NO_OOB ? NULL :
798				&buf[len]);
799		if (res < 0)
800			goto outerr;
801
802		pr_info("Bad block table written to 0x%012llx, version 0x%02X\n",
803			 (unsigned long long)to, td->version[chip]);
804
805		/* Mark it as used */
806		td->pages[chip] = page;
807	}
808	return 0;
809
810 outerr:
811	pr_warn("nand_bbt: error while writing bad block table %d\n", res);
812	return res;
813}
814
815/**
816 * nand_memory_bbt - [GENERIC] create a memory based bad block table
817 * @mtd: MTD device structure
818 * @bd: descriptor for the good/bad block search pattern
819 *
820 * The function creates a memory based bbt by scanning the device for
821 * manufacturer / software marked good / bad blocks.
822 */
823static inline int nand_memory_bbt(struct mtd_info *mtd, struct nand_bbt_descr *bd)
824{
825	struct nand_chip *this = mtd->priv;
826
827	return create_bbt(mtd, this->buffers->databuf, bd, -1);
828}
829
830/**
831 * check_create - [GENERIC] create and write bbt(s) if necessary
832 * @mtd: MTD device structure
833 * @buf: temporary buffer
834 * @bd: descriptor for the good/bad block search pattern
835 *
836 * The function checks the results of the previous call to read_bbt and creates
837 * / updates the bbt(s) if necessary. Creation is necessary if no bbt was found
838 * for the chip/device. Update is necessary if one of the tables is missing or
839 * the version nr. of one table is less than the other.
840 */
841static int check_create(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr *bd)
842{
843	int i, chips, writeops, create, chipsel, res, res2;
844	struct nand_chip *this = mtd->priv;
845	struct nand_bbt_descr *td = this->bbt_td;
846	struct nand_bbt_descr *md = this->bbt_md;
847	struct nand_bbt_descr *rd, *rd2;
848
849	/* Do we have a bbt per chip? */
850	if (td->options & NAND_BBT_PERCHIP)
851		chips = this->numchips;
852	else
853		chips = 1;
854
855	for (i = 0; i < chips; i++) {
856		writeops = 0;
857		create = 0;
858		rd = NULL;
859		rd2 = NULL;
860		res = res2 = 0;
861		/* Per chip or per device? */
862		chipsel = (td->options & NAND_BBT_PERCHIP) ? i : -1;
863		/* Mirrored table available? */
864		if (md) {
865			if (td->pages[i] == -1 && md->pages[i] == -1) {
866				create = 1;
867				writeops = 0x03;
868			} else if (td->pages[i] == -1) {
869				rd = md;
870				writeops = 0x01;
871			} else if (md->pages[i] == -1) {
872				rd = td;
873				writeops = 0x02;
874			} else if (td->version[i] == md->version[i]) {
875				rd = td;
876				if (!(td->options & NAND_BBT_VERSION))
877					rd2 = md;
878			} else if (((int8_t)(td->version[i] - md->version[i])) > 0) {
879				rd = td;
880				writeops = 0x02;
881			} else {
882				rd = md;
883				writeops = 0x01;
884			}
885		} else {
886			if (td->pages[i] == -1) {
887				create = 1;
888				writeops = 0x01;
889			} else {
890				rd = td;
891			}
892		}
893
894		if (create) {
895			/* Create the bad block table by scanning the device? */
896			if (!(td->options & NAND_BBT_CREATE))
897				continue;
898
899			/* Create the table in memory by scanning the chip(s) */
900			if (!(this->bbt_options & NAND_BBT_CREATE_EMPTY))
901				create_bbt(mtd, buf, bd, chipsel);
902
903			td->version[i] = 1;
904			if (md)
905				md->version[i] = 1;
906		}
907
908		/* Read back first? */
909		if (rd) {
910			res = read_abs_bbt(mtd, buf, rd, chipsel);
911			if (mtd_is_eccerr(res)) {
912				/* Mark table as invalid */
913				rd->pages[i] = -1;
914				rd->version[i] = 0;
915				i--;
916				continue;
917			}
918		}
919		/* If they weren't versioned, read both */
920		if (rd2) {
921			res2 = read_abs_bbt(mtd, buf, rd2, chipsel);
922			if (mtd_is_eccerr(res2)) {
923				/* Mark table as invalid */
924				rd2->pages[i] = -1;
925				rd2->version[i] = 0;
926				i--;
927				continue;
928			}
929		}
930
931		/* Scrub the flash table(s)? */
932		if (mtd_is_bitflip(res) || mtd_is_bitflip(res2))
933			writeops = 0x03;
934
935		/* Update version numbers before writing */
936		if (md) {
937			td->version[i] = max(td->version[i], md->version[i]);
938			md->version[i] = td->version[i];
939		}
940
941		/* Write the bad block table to the device? */
942		if ((writeops & 0x01) && (td->options & NAND_BBT_WRITE)) {
943			res = write_bbt(mtd, buf, td, md, chipsel);
944			if (res < 0)
945				return res;
946		}
947
948		/* Write the mirror bad block table to the device? */
949		if ((writeops & 0x02) && md && (md->options & NAND_BBT_WRITE)) {
950			res = write_bbt(mtd, buf, md, td, chipsel);
951			if (res < 0)
952				return res;
953		}
954	}
955	return 0;
956}
957
958/**
959 * mark_bbt_regions - [GENERIC] mark the bad block table regions
960 * @mtd: MTD device structure
961 * @td: bad block table descriptor
962 *
963 * The bad block table regions are marked as "bad" to prevent accidental
964 * erasures / writes. The regions are identified by the mark 0x02.
965 */
966static void mark_bbt_region(struct mtd_info *mtd, struct nand_bbt_descr *td)
967{
968	struct nand_chip *this = mtd->priv;
969	int i, j, chips, block, nrblocks, update;
970	uint8_t oldval;
971
972	/* Do we have a bbt per chip? */
973	if (td->options & NAND_BBT_PERCHIP) {
974		chips = this->numchips;
975		nrblocks = (int)(this->chipsize >> this->bbt_erase_shift);
976	} else {
977		chips = 1;
978		nrblocks = (int)(mtd->size >> this->bbt_erase_shift);
979	}
980
981	for (i = 0; i < chips; i++) {
982		if ((td->options & NAND_BBT_ABSPAGE) ||
983		    !(td->options & NAND_BBT_WRITE)) {
984			if (td->pages[i] == -1)
985				continue;
986			block = td->pages[i] >> (this->bbt_erase_shift - this->page_shift);
987			oldval = bbt_get_entry(this, block);
988			bbt_mark_entry(this, block, BBT_BLOCK_RESERVED);
989			if ((oldval != BBT_BLOCK_RESERVED) &&
990					td->reserved_block_code)
991				nand_update_bbt(mtd, (loff_t)block <<
992						this->bbt_erase_shift);
993			continue;
994		}
995		update = 0;
996		if (td->options & NAND_BBT_LASTBLOCK)
997			block = ((i + 1) * nrblocks) - td->maxblocks;
998		else
999			block = i * nrblocks;
1000		for (j = 0; j < td->maxblocks; j++) {
1001			oldval = bbt_get_entry(this, block);
1002			bbt_mark_entry(this, block, BBT_BLOCK_RESERVED);
1003			if (oldval != BBT_BLOCK_RESERVED)
1004				update = 1;
1005			block++;
1006		}
1007		/*
1008		 * If we want reserved blocks to be recorded to flash, and some
1009		 * new ones have been marked, then we need to update the stored
1010		 * bbts.  This should only happen once.
1011		 */
1012		if (update && td->reserved_block_code)
1013			nand_update_bbt(mtd, (loff_t)(block - 1) <<
1014					this->bbt_erase_shift);
1015	}
1016}
1017
1018/**
1019 * verify_bbt_descr - verify the bad block description
1020 * @mtd: MTD device structure
1021 * @bd: the table to verify
1022 *
1023 * This functions performs a few sanity checks on the bad block description
1024 * table.
1025 */
1026static void verify_bbt_descr(struct mtd_info *mtd, struct nand_bbt_descr *bd)
1027{
1028	struct nand_chip *this = mtd->priv;
1029	u32 pattern_len;
1030	u32 bits;
1031	u32 table_size;
1032
1033	if (!bd)
1034		return;
1035
1036	pattern_len = bd->len;
1037	bits = bd->options & NAND_BBT_NRBITS_MSK;
1038
1039	BUG_ON((this->bbt_options & NAND_BBT_NO_OOB) &&
1040			!(this->bbt_options & NAND_BBT_USE_FLASH));
1041	BUG_ON(!bits);
1042
1043	if (bd->options & NAND_BBT_VERSION)
1044		pattern_len++;
1045
1046	if (bd->options & NAND_BBT_NO_OOB) {
1047		BUG_ON(!(this->bbt_options & NAND_BBT_USE_FLASH));
1048		BUG_ON(!(this->bbt_options & NAND_BBT_NO_OOB));
1049		BUG_ON(bd->offs);
1050		if (bd->options & NAND_BBT_VERSION)
1051			BUG_ON(bd->veroffs != bd->len);
1052		BUG_ON(bd->options & NAND_BBT_SAVECONTENT);
1053	}
1054
1055	if (bd->options & NAND_BBT_PERCHIP)
1056		table_size = this->chipsize >> this->bbt_erase_shift;
1057	else
1058		table_size = mtd->size >> this->bbt_erase_shift;
1059	table_size >>= 3;
1060	table_size *= bits;
1061	if (bd->options & NAND_BBT_NO_OOB)
1062		table_size += pattern_len;
1063	BUG_ON(table_size > (1 << this->bbt_erase_shift));
1064}
1065
1066/**
1067 * nand_scan_bbt - [NAND Interface] scan, find, read and maybe create bad block table(s)
1068 * @mtd: MTD device structure
1069 * @bd: descriptor for the good/bad block search pattern
1070 *
1071 * The function checks, if a bad block table(s) is/are already available. If
1072 * not it scans the device for manufacturer marked good / bad blocks and writes
1073 * the bad block table(s) to the selected place.
1074 *
1075 * The bad block table memory is allocated here. It must be freed by calling
1076 * the nand_free_bbt function.
1077 */
1078int nand_scan_bbt(struct mtd_info *mtd, struct nand_bbt_descr *bd)
1079{
1080	struct nand_chip *this = mtd->priv;
1081	int len, res = 0;
1082	uint8_t *buf;
1083	struct nand_bbt_descr *td = this->bbt_td;
1084	struct nand_bbt_descr *md = this->bbt_md;
1085
1086	len = mtd->size >> (this->bbt_erase_shift + 2);
1087	/*
1088	 * Allocate memory (2bit per block) and clear the memory bad block
1089	 * table.
1090	 */
1091	this->bbt = kzalloc(len, GFP_KERNEL);
1092	if (!this->bbt)
1093		return -ENOMEM;
1094
1095	/*
1096	 * If no primary table decriptor is given, scan the device to build a
1097	 * memory based bad block table.
1098	 */
1099	if (!td) {
1100		if ((res = nand_memory_bbt(mtd, bd))) {
1101			pr_err("nand_bbt: can't scan flash and build the RAM-based BBT\n");
1102			kfree(this->bbt);
1103			this->bbt = NULL;
1104		}
1105		return res;
1106	}
1107	verify_bbt_descr(mtd, td);
1108	verify_bbt_descr(mtd, md);
1109
1110	/* Allocate a temporary buffer for one eraseblock incl. oob */
1111	len = (1 << this->bbt_erase_shift);
1112	len += (len >> this->page_shift) * mtd->oobsize;
1113	buf = vmalloc(len);
1114	if (!buf) {
1115		kfree(this->bbt);
1116		this->bbt = NULL;
1117		return -ENOMEM;
1118	}
1119
1120	/* Is the bbt at a given page? */
1121	if (td->options & NAND_BBT_ABSPAGE) {
1122		read_abs_bbts(mtd, buf, td, md);
1123	} else {
1124		/* Search the bad block table using a pattern in oob */
1125		search_read_bbts(mtd, buf, td, md);
1126	}
1127
1128	res = check_create(mtd, buf, bd);
1129
1130	/* Prevent the bbt regions from erasing / writing */
1131	mark_bbt_region(mtd, td);
1132	if (md)
1133		mark_bbt_region(mtd, md);
1134
1135	vfree(buf);
1136	return res;
1137}
1138
1139/**
1140 * nand_update_bbt - update bad block table(s)
1141 * @mtd: MTD device structure
1142 * @offs: the offset of the newly marked block
1143 *
1144 * The function updates the bad block table(s).
1145 */
1146static int nand_update_bbt(struct mtd_info *mtd, loff_t offs)
1147{
1148	struct nand_chip *this = mtd->priv;
1149	int len, res = 0;
1150	int chip, chipsel;
1151	uint8_t *buf;
1152	struct nand_bbt_descr *td = this->bbt_td;
1153	struct nand_bbt_descr *md = this->bbt_md;
1154
1155	if (!this->bbt || !td)
1156		return -EINVAL;
1157
1158	/* Allocate a temporary buffer for one eraseblock incl. oob */
1159	len = (1 << this->bbt_erase_shift);
1160	len += (len >> this->page_shift) * mtd->oobsize;
1161	buf = kmalloc(len, GFP_KERNEL);
1162	if (!buf)
1163		return -ENOMEM;
1164
1165	/* Do we have a bbt per chip? */
1166	if (td->options & NAND_BBT_PERCHIP) {
1167		chip = (int)(offs >> this->chip_shift);
1168		chipsel = chip;
1169	} else {
1170		chip = 0;
1171		chipsel = -1;
1172	}
1173
1174	td->version[chip]++;
1175	if (md)
1176		md->version[chip]++;
1177
1178	/* Write the bad block table to the device? */
1179	if (td->options & NAND_BBT_WRITE) {
1180		res = write_bbt(mtd, buf, td, md, chipsel);
1181		if (res < 0)
1182			goto out;
1183	}
1184	/* Write the mirror bad block table to the device? */
1185	if (md && (md->options & NAND_BBT_WRITE)) {
1186		res = write_bbt(mtd, buf, md, td, chipsel);
1187	}
1188
1189 out:
1190	kfree(buf);
1191	return res;
1192}
1193
1194/*
1195 * Define some generic bad / good block scan pattern which are used
1196 * while scanning a device for factory marked good / bad blocks.
1197 */
1198static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
1199
1200/* Generic flash bbt descriptors */
1201static uint8_t bbt_pattern[] = {'B', 'b', 't', '0' };
1202static uint8_t mirror_pattern[] = {'1', 't', 'b', 'B' };
1203
1204static struct nand_bbt_descr bbt_main_descr = {
1205	.options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE
1206		| NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP,
1207	.offs =	8,
1208	.len = 4,
1209	.veroffs = 12,
1210	.maxblocks = NAND_BBT_SCAN_MAXBLOCKS,
1211	.pattern = bbt_pattern
1212};
1213
1214static struct nand_bbt_descr bbt_mirror_descr = {
1215	.options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE
1216		| NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP,
1217	.offs =	8,
1218	.len = 4,
1219	.veroffs = 12,
1220	.maxblocks = NAND_BBT_SCAN_MAXBLOCKS,
1221	.pattern = mirror_pattern
1222};
1223
1224static struct nand_bbt_descr bbt_main_no_oob_descr = {
1225	.options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE
1226		| NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP
1227		| NAND_BBT_NO_OOB,
1228	.len = 4,
1229	.veroffs = 4,
1230	.maxblocks = NAND_BBT_SCAN_MAXBLOCKS,
1231	.pattern = bbt_pattern
1232};
1233
1234static struct nand_bbt_descr bbt_mirror_no_oob_descr = {
1235	.options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE
1236		| NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP
1237		| NAND_BBT_NO_OOB,
1238	.len = 4,
1239	.veroffs = 4,
1240	.maxblocks = NAND_BBT_SCAN_MAXBLOCKS,
1241	.pattern = mirror_pattern
1242};
1243
1244#define BADBLOCK_SCAN_MASK (~NAND_BBT_NO_OOB)
1245/**
1246 * nand_create_badblock_pattern - [INTERN] Creates a BBT descriptor structure
1247 * @this: NAND chip to create descriptor for
1248 *
1249 * This function allocates and initializes a nand_bbt_descr for BBM detection
1250 * based on the properties of @this. The new descriptor is stored in
1251 * this->badblock_pattern. Thus, this->badblock_pattern should be NULL when
1252 * passed to this function.
1253 */
1254static int nand_create_badblock_pattern(struct nand_chip *this)
1255{
1256	struct nand_bbt_descr *bd;
1257	if (this->badblock_pattern) {
1258		pr_warn("Bad block pattern already allocated; not replacing\n");
1259		return -EINVAL;
1260	}
1261	bd = kzalloc(sizeof(*bd), GFP_KERNEL);
1262	if (!bd)
1263		return -ENOMEM;
1264	bd->options = this->bbt_options & BADBLOCK_SCAN_MASK;
1265	bd->offs = this->badblockpos;
1266	bd->len = (this->options & NAND_BUSWIDTH_16) ? 2 : 1;
1267	bd->pattern = scan_ff_pattern;
1268	bd->options |= NAND_BBT_DYNAMICSTRUCT;
1269	this->badblock_pattern = bd;
1270	return 0;
1271}
1272
1273/**
1274 * nand_default_bbt - [NAND Interface] Select a default bad block table for the device
1275 * @mtd: MTD device structure
1276 *
1277 * This function selects the default bad block table support for the device and
1278 * calls the nand_scan_bbt function.
1279 */
1280int nand_default_bbt(struct mtd_info *mtd)
1281{
1282	struct nand_chip *this = mtd->priv;
1283	int ret;
1284
1285	/* Is a flash based bad block table requested? */
1286	if (this->bbt_options & NAND_BBT_USE_FLASH) {
1287		/* Use the default pattern descriptors */
1288		if (!this->bbt_td) {
1289			if (this->bbt_options & NAND_BBT_NO_OOB) {
1290				this->bbt_td = &bbt_main_no_oob_descr;
1291				this->bbt_md = &bbt_mirror_no_oob_descr;
1292			} else {
1293				this->bbt_td = &bbt_main_descr;
1294				this->bbt_md = &bbt_mirror_descr;
1295			}
1296		}
1297	} else {
1298		this->bbt_td = NULL;
1299		this->bbt_md = NULL;
1300	}
1301
1302	if (!this->badblock_pattern) {
1303		ret = nand_create_badblock_pattern(this);
1304		if (ret)
1305			return ret;
1306	}
1307
1308	return nand_scan_bbt(mtd, this->badblock_pattern);
1309}
1310
1311/**
1312 * nand_isreserved_bbt - [NAND Interface] Check if a block is reserved
1313 * @mtd: MTD device structure
1314 * @offs: offset in the device
1315 */
1316int nand_isreserved_bbt(struct mtd_info *mtd, loff_t offs)
1317{
1318	struct nand_chip *this = mtd->priv;
1319	int block;
1320
1321	block = (int)(offs >> this->bbt_erase_shift);
1322	return bbt_get_entry(this, block) == BBT_BLOCK_RESERVED;
1323}
1324
1325/**
1326 * nand_isbad_bbt - [NAND Interface] Check if a block is bad
1327 * @mtd: MTD device structure
1328 * @offs: offset in the device
1329 * @allowbbt: allow access to bad block table region
1330 */
1331int nand_isbad_bbt(struct mtd_info *mtd, loff_t offs, int allowbbt)
1332{
1333	struct nand_chip *this = mtd->priv;
1334	int block, res;
1335
1336	block = (int)(offs >> this->bbt_erase_shift);
1337	res = bbt_get_entry(this, block);
1338
1339	pr_debug("nand_isbad_bbt(): bbt info for offs 0x%08x: (block %d) 0x%02x\n",
1340		 (unsigned int)offs, block, res);
1341
1342	switch (res) {
1343	case BBT_BLOCK_GOOD:
1344		return 0;
1345	case BBT_BLOCK_WORN:
1346		return 1;
1347	case BBT_BLOCK_RESERVED:
1348		return allowbbt ? 0 : 1;
1349	}
1350	return 1;
1351}
1352
1353/**
1354 * nand_markbad_bbt - [NAND Interface] Mark a block bad in the BBT
1355 * @mtd: MTD device structure
1356 * @offs: offset of the bad block
1357 */
1358int nand_markbad_bbt(struct mtd_info *mtd, loff_t offs)
1359{
1360	struct nand_chip *this = mtd->priv;
1361	int block, ret = 0;
1362
1363	block = (int)(offs >> this->bbt_erase_shift);
1364
1365	/* Mark bad block in memory */
1366	bbt_mark_entry(this, block, BBT_BLOCK_WORN);
1367
1368	/* Update flash-based bad block table */
1369	if (this->bbt_options & NAND_BBT_USE_FLASH)
1370		ret = nand_update_bbt(mtd, offs);
1371
1372	return ret;
1373}
1374
1375EXPORT_SYMBOL(nand_scan_bbt);
1376