[go: nahoru, domu]
1/*
2 * Copyright (C) 2008 Per Dalen <per.dalen@cnw.se>
3 *
4 * Parts of this software are based on (derived) the following:
5 *
6 * - Kvaser linux driver, version 4.72 BETA
7 *   Copyright (C) 2002-2007 KVASER AB
8 *
9 * - Lincan driver, version 0.3.3, OCERA project
10 *   Copyright (C) 2004 Pavel Pisa
11 *   Copyright (C) 2001 Arnaud Westenberg
12 *
13 * - Socketcan SJA1000 drivers
14 *   Copyright (C) 2007 Wolfgang Grandegger <wg@grandegger.com>
15 *   Copyright (c) 2002-2007 Volkswagen Group Electronic Research
16 *   Copyright (c) 2003 Matthias Brukner, Trajet Gmbh, Rebenring 33,
17 *   38106 Braunschweig, GERMANY
18 *
19 * This program is free software; you can redistribute it and/or modify
20 * it under the terms of the version 2 of the GNU General Public License
21 * as published by the Free Software Foundation
22 *
23 * This program is distributed in the hope that it will be useful, but
24 * WITHOUT ANY WARRANTY; without even the implied warranty of
25 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
26 * General Public License for more details.
27 *
28 * You should have received a copy of the GNU General Public License
29 * along with this program; if not, see <http://www.gnu.org/licenses/>.
30 */
31
32#include <linux/kernel.h>
33#include <linux/module.h>
34#include <linux/interrupt.h>
35#include <linux/netdevice.h>
36#include <linux/delay.h>
37#include <linux/pci.h>
38#include <linux/can/dev.h>
39#include <linux/io.h>
40
41#include "sja1000.h"
42
43#define DRV_NAME  "kvaser_pci"
44
45MODULE_AUTHOR("Per Dalen <per.dalen@cnw.se>");
46MODULE_DESCRIPTION("Socket-CAN driver for KVASER PCAN PCI cards");
47MODULE_SUPPORTED_DEVICE("KVASER PCAN PCI CAN card");
48MODULE_LICENSE("GPL v2");
49
50#define MAX_NO_OF_CHANNELS        4 /* max no of channels on a single card */
51
52struct kvaser_pci {
53	int channel;
54	struct pci_dev *pci_dev;
55	struct net_device *slave_dev[MAX_NO_OF_CHANNELS-1];
56	void __iomem *conf_addr;
57	void __iomem *res_addr;
58	int no_channels;
59	u8 xilinx_ver;
60};
61
62#define KVASER_PCI_CAN_CLOCK      (16000000 / 2)
63
64/*
65 * The board configuration is probably following:
66 * RX1 is connected to ground.
67 * TX1 is not connected.
68 * CLKO is not connected.
69 * Setting the OCR register to 0xDA is a good idea.
70 * This means  normal output mode , push-pull and the correct polarity.
71 */
72#define KVASER_PCI_OCR            (OCR_TX0_PUSHPULL | OCR_TX1_PUSHPULL)
73
74/*
75 * In the CDR register, you should set CBP to 1.
76 * You will probably also want to set the clock divider value to 0
77 * (meaning divide-by-2), the Pelican bit, and the clock-off bit
78 * (you will have no need for CLKOUT anyway).
79 */
80#define KVASER_PCI_CDR            (CDR_CBP | CDR_CLKOUT_MASK)
81
82/*
83 * These register values are valid for revision 14 of the Xilinx logic.
84 */
85#define XILINX_VERINT             7   /* Lower nibble simulate interrupts,
86					 high nibble version number. */
87
88#define XILINX_PRESUMED_VERSION   14
89
90/*
91 * Important S5920 registers
92 */
93#define S5920_INTCSR              0x38
94#define S5920_PTCR                0x60
95#define INTCSR_ADDON_INTENABLE_M  0x2000
96
97
98#define KVASER_PCI_PORT_BYTES     0x20
99
100#define PCI_CONFIG_PORT_SIZE      0x80      /* size of the config io-memory */
101#define PCI_PORT_SIZE             0x80      /* size of a channel io-memory */
102#define PCI_PORT_XILINX_SIZE      0x08      /* size of a xilinx io-memory */
103
104#define KVASER_PCI_VENDOR_ID1     0x10e8    /* the PCI device and vendor IDs */
105#define KVASER_PCI_DEVICE_ID1     0x8406
106
107#define KVASER_PCI_VENDOR_ID2     0x1a07    /* the PCI device and vendor IDs */
108#define KVASER_PCI_DEVICE_ID2     0x0008
109
110static const struct pci_device_id kvaser_pci_tbl[] = {
111	{KVASER_PCI_VENDOR_ID1, KVASER_PCI_DEVICE_ID1, PCI_ANY_ID, PCI_ANY_ID,},
112	{KVASER_PCI_VENDOR_ID2, KVASER_PCI_DEVICE_ID2, PCI_ANY_ID, PCI_ANY_ID,},
113	{ 0,}
114};
115
116MODULE_DEVICE_TABLE(pci, kvaser_pci_tbl);
117
118static u8 kvaser_pci_read_reg(const struct sja1000_priv *priv, int port)
119{
120	return ioread8(priv->reg_base + port);
121}
122
123static void kvaser_pci_write_reg(const struct sja1000_priv *priv,
124				 int port, u8 val)
125{
126	iowrite8(val, priv->reg_base + port);
127}
128
129static void kvaser_pci_disable_irq(struct net_device *dev)
130{
131	struct sja1000_priv *priv = netdev_priv(dev);
132	struct kvaser_pci *board = priv->priv;
133	u32 intcsr;
134
135	/* Disable interrupts from card */
136	intcsr = ioread32(board->conf_addr + S5920_INTCSR);
137	intcsr &= ~INTCSR_ADDON_INTENABLE_M;
138	iowrite32(intcsr, board->conf_addr + S5920_INTCSR);
139}
140
141static void kvaser_pci_enable_irq(struct net_device *dev)
142{
143	struct sja1000_priv *priv = netdev_priv(dev);
144	struct kvaser_pci *board = priv->priv;
145	u32 tmp_en_io;
146
147	/* Enable interrupts from card */
148	tmp_en_io = ioread32(board->conf_addr + S5920_INTCSR);
149	tmp_en_io |= INTCSR_ADDON_INTENABLE_M;
150	iowrite32(tmp_en_io, board->conf_addr + S5920_INTCSR);
151}
152
153static int number_of_sja1000_chip(void __iomem *base_addr)
154{
155	u8 status;
156	int i;
157
158	for (i = 0; i < MAX_NO_OF_CHANNELS; i++) {
159		/* reset chip */
160		iowrite8(MOD_RM, base_addr +
161			 (i * KVASER_PCI_PORT_BYTES) + SJA1000_MOD);
162		status = ioread8(base_addr +
163				 (i * KVASER_PCI_PORT_BYTES) + SJA1000_MOD);
164		/* check reset bit */
165		if (!(status & MOD_RM))
166			break;
167	}
168
169	return i;
170}
171
172static void kvaser_pci_del_chan(struct net_device *dev)
173{
174	struct sja1000_priv *priv;
175	struct kvaser_pci *board;
176	int i;
177
178	if (!dev)
179		return;
180	priv = netdev_priv(dev);
181	board = priv->priv;
182	if (!board)
183		return;
184
185	dev_info(&board->pci_dev->dev, "Removing device %s\n",
186		 dev->name);
187
188	/* Disable PCI interrupts */
189	kvaser_pci_disable_irq(dev);
190
191	for (i = 0; i < board->no_channels - 1; i++) {
192		if (board->slave_dev[i]) {
193			dev_info(&board->pci_dev->dev, "Removing device %s\n",
194				 board->slave_dev[i]->name);
195			unregister_sja1000dev(board->slave_dev[i]);
196			free_sja1000dev(board->slave_dev[i]);
197		}
198	}
199	unregister_sja1000dev(dev);
200
201	pci_iounmap(board->pci_dev, priv->reg_base);
202	pci_iounmap(board->pci_dev, board->conf_addr);
203	pci_iounmap(board->pci_dev, board->res_addr);
204
205	free_sja1000dev(dev);
206}
207
208static int kvaser_pci_add_chan(struct pci_dev *pdev, int channel,
209			       struct net_device **master_dev,
210			       void __iomem *conf_addr,
211			       void __iomem *res_addr,
212			       void __iomem *base_addr)
213{
214	struct net_device *dev;
215	struct sja1000_priv *priv;
216	struct kvaser_pci *board;
217	int err;
218
219	dev = alloc_sja1000dev(sizeof(struct kvaser_pci));
220	if (dev == NULL)
221		return -ENOMEM;
222
223	priv = netdev_priv(dev);
224	board = priv->priv;
225
226	board->pci_dev = pdev;
227	board->channel = channel;
228
229	/* S5920 */
230	board->conf_addr = conf_addr;
231
232	/* XILINX board wide address */
233	board->res_addr = res_addr;
234
235	if (channel == 0) {
236		board->xilinx_ver =
237			ioread8(board->res_addr + XILINX_VERINT) >> 4;
238
239		/* Assert PTADR# - we're in passive mode so the other bits are
240		   not important */
241		iowrite32(0x80808080UL, board->conf_addr + S5920_PTCR);
242
243		/* Enable interrupts from card */
244		kvaser_pci_enable_irq(dev);
245	} else {
246		struct sja1000_priv *master_priv = netdev_priv(*master_dev);
247		struct kvaser_pci *master_board = master_priv->priv;
248		master_board->slave_dev[channel - 1] = dev;
249		master_board->no_channels = channel + 1;
250		board->xilinx_ver = master_board->xilinx_ver;
251	}
252
253	priv->reg_base = base_addr + channel * KVASER_PCI_PORT_BYTES;
254
255	priv->read_reg = kvaser_pci_read_reg;
256	priv->write_reg = kvaser_pci_write_reg;
257
258	priv->can.clock.freq = KVASER_PCI_CAN_CLOCK;
259
260	priv->ocr = KVASER_PCI_OCR;
261	priv->cdr = KVASER_PCI_CDR;
262
263	priv->irq_flags = IRQF_SHARED;
264	dev->irq = pdev->irq;
265
266	dev_info(&pdev->dev, "reg_base=%p conf_addr=%p irq=%d\n",
267		 priv->reg_base, board->conf_addr, dev->irq);
268
269	SET_NETDEV_DEV(dev, &pdev->dev);
270	dev->dev_id = channel;
271
272	/* Register SJA1000 device */
273	err = register_sja1000dev(dev);
274	if (err) {
275		dev_err(&pdev->dev, "Registering device failed (err=%d)\n",
276			err);
277		goto failure;
278	}
279
280	if (channel == 0)
281		*master_dev = dev;
282
283	return 0;
284
285failure:
286	kvaser_pci_del_chan(dev);
287	return err;
288}
289
290static int kvaser_pci_init_one(struct pci_dev *pdev,
291			       const struct pci_device_id *ent)
292{
293	int err;
294	struct net_device *master_dev = NULL;
295	struct sja1000_priv *priv;
296	struct kvaser_pci *board;
297	int no_channels;
298	void __iomem *base_addr = NULL;
299	void __iomem *conf_addr = NULL;
300	void __iomem *res_addr = NULL;
301	int i;
302
303	dev_info(&pdev->dev, "initializing device %04x:%04x\n",
304		 pdev->vendor, pdev->device);
305
306	err = pci_enable_device(pdev);
307	if (err)
308		goto failure;
309
310	err = pci_request_regions(pdev, DRV_NAME);
311	if (err)
312		goto failure_release_pci;
313
314	/* S5920 */
315	conf_addr = pci_iomap(pdev, 0, PCI_CONFIG_PORT_SIZE);
316	if (conf_addr == NULL) {
317		err = -ENODEV;
318		goto failure_release_regions;
319	}
320
321	/* XILINX board wide address */
322	res_addr = pci_iomap(pdev, 2, PCI_PORT_XILINX_SIZE);
323	if (res_addr == NULL) {
324		err = -ENOMEM;
325		goto failure_iounmap;
326	}
327
328	base_addr = pci_iomap(pdev, 1, PCI_PORT_SIZE);
329	if (base_addr == NULL) {
330		err = -ENOMEM;
331		goto failure_iounmap;
332	}
333
334	no_channels = number_of_sja1000_chip(base_addr);
335	if (no_channels == 0) {
336		err = -ENOMEM;
337		goto failure_iounmap;
338	}
339
340	for (i = 0; i < no_channels; i++) {
341		err = kvaser_pci_add_chan(pdev, i, &master_dev,
342					  conf_addr, res_addr,
343					  base_addr);
344		if (err)
345			goto failure_cleanup;
346	}
347
348	priv = netdev_priv(master_dev);
349	board = priv->priv;
350
351	dev_info(&pdev->dev, "xilinx version=%d number of channels=%d\n",
352		 board->xilinx_ver, board->no_channels);
353
354	pci_set_drvdata(pdev, master_dev);
355	return 0;
356
357failure_cleanup:
358	kvaser_pci_del_chan(master_dev);
359
360failure_iounmap:
361	if (conf_addr != NULL)
362		pci_iounmap(pdev, conf_addr);
363	if (res_addr != NULL)
364		pci_iounmap(pdev, res_addr);
365	if (base_addr != NULL)
366		pci_iounmap(pdev, base_addr);
367
368failure_release_regions:
369	pci_release_regions(pdev);
370
371failure_release_pci:
372	pci_disable_device(pdev);
373
374failure:
375	return err;
376
377}
378
379static void kvaser_pci_remove_one(struct pci_dev *pdev)
380{
381	struct net_device *dev = pci_get_drvdata(pdev);
382
383	kvaser_pci_del_chan(dev);
384
385	pci_release_regions(pdev);
386	pci_disable_device(pdev);
387}
388
389static struct pci_driver kvaser_pci_driver = {
390	.name = DRV_NAME,
391	.id_table = kvaser_pci_tbl,
392	.probe = kvaser_pci_init_one,
393	.remove = kvaser_pci_remove_one,
394};
395
396module_pci_driver(kvaser_pci_driver);
397