[go: nahoru, domu]

1/*
2 * Copyright (c) 2007 Mellanox Technologies. All rights reserved.
3 *
4 * This software is available to you under a choice of one of two
5 * licenses.  You may choose to be licensed under the terms of the GNU
6 * General Public License (GPL) Version 2, available from the file
7 * COPYING in the main directory of this source tree, or the
8 * OpenIB.org BSD license below:
9 *
10 *     Redistribution and use in source and binary forms, with or
11 *     without modification, are permitted provided that the following
12 *     conditions are met:
13 *
14 *      - Redistributions of source code must retain the above
15 *        copyright notice, this list of conditions and the following
16 *        disclaimer.
17 *
18 *      - Redistributions in binary form must reproduce the above
19 *        copyright notice, this list of conditions and the following
20 *        disclaimer in the documentation and/or other materials
21 *        provided with the distribution.
22 *
23 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
24 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
25 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
26 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
27 * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
28 * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
29 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
30 * SOFTWARE.
31 *
32 */
33
34#include <linux/cpumask.h>
35#include <linux/module.h>
36#include <linux/delay.h>
37#include <linux/netdevice.h>
38#include <linux/slab.h>
39
40#include <linux/mlx4/driver.h>
41#include <linux/mlx4/device.h>
42#include <linux/mlx4/cmd.h>
43
44#include "mlx4_en.h"
45
46MODULE_AUTHOR("Liran Liss, Yevgeny Petrilin");
47MODULE_DESCRIPTION("Mellanox ConnectX HCA Ethernet driver");
48MODULE_LICENSE("Dual BSD/GPL");
49MODULE_VERSION(DRV_VERSION " ("DRV_RELDATE")");
50
51static const char mlx4_en_version[] =
52	DRV_NAME ": Mellanox ConnectX HCA Ethernet driver v"
53	DRV_VERSION " (" DRV_RELDATE ")\n";
54
55#define MLX4_EN_PARM_INT(X, def_val, desc) \
56	static unsigned int X = def_val;\
57	module_param(X , uint, 0444); \
58	MODULE_PARM_DESC(X, desc);
59
60
61/*
62 * Device scope module parameters
63 */
64
65/* Enable RSS UDP traffic */
66MLX4_EN_PARM_INT(udp_rss, 1,
67		 "Enable RSS for incoming UDP traffic or disabled (0)");
68
69/* Priority pausing */
70MLX4_EN_PARM_INT(pfctx, 0, "Priority based Flow Control policy on TX[7:0]."
71			   " Per priority bit mask");
72MLX4_EN_PARM_INT(pfcrx, 0, "Priority based Flow Control policy on RX[7:0]."
73			   " Per priority bit mask");
74
75MLX4_EN_PARM_INT(inline_thold, MAX_INLINE,
76		 "Threshold for using inline data (range: 17-104, default: 104)");
77
78#define MAX_PFC_TX     0xff
79#define MAX_PFC_RX     0xff
80
81void en_print(const char *level, const struct mlx4_en_priv *priv,
82	      const char *format, ...)
83{
84	va_list args;
85	struct va_format vaf;
86
87	va_start(args, format);
88
89	vaf.fmt = format;
90	vaf.va = &args;
91	if (priv->registered)
92		printk("%s%s: %s: %pV",
93		       level, DRV_NAME, priv->dev->name, &vaf);
94	else
95		printk("%s%s: %s: Port %d: %pV",
96		       level, DRV_NAME, dev_name(&priv->mdev->pdev->dev),
97		       priv->port, &vaf);
98	va_end(args);
99}
100
101void mlx4_en_update_loopback_state(struct net_device *dev,
102				   netdev_features_t features)
103{
104	struct mlx4_en_priv *priv = netdev_priv(dev);
105
106	priv->flags &= ~(MLX4_EN_FLAG_RX_FILTER_NEEDED|
107			MLX4_EN_FLAG_ENABLE_HW_LOOPBACK);
108
109	/* Drop the packet if SRIOV is not enabled
110	 * and not performing the selftest or flb disabled
111	 */
112	if (mlx4_is_mfunc(priv->mdev->dev) &&
113	    !(features & NETIF_F_LOOPBACK) && !priv->validate_loopback)
114		priv->flags |= MLX4_EN_FLAG_RX_FILTER_NEEDED;
115
116	/* Set dmac in Tx WQE if we are in SRIOV mode or if loopback selftest
117	 * is requested
118	 */
119	if (mlx4_is_mfunc(priv->mdev->dev) || priv->validate_loopback)
120		priv->flags |= MLX4_EN_FLAG_ENABLE_HW_LOOPBACK;
121}
122
123static int mlx4_en_get_profile(struct mlx4_en_dev *mdev)
124{
125	struct mlx4_en_profile *params = &mdev->profile;
126	int i;
127
128	params->udp_rss = udp_rss;
129	params->num_tx_rings_p_up = mlx4_low_memory_profile() ?
130		MLX4_EN_MIN_TX_RING_P_UP :
131		min_t(int, num_online_cpus(), MLX4_EN_MAX_TX_RING_P_UP);
132
133	if (params->udp_rss && !(mdev->dev->caps.flags
134					& MLX4_DEV_CAP_FLAG_UDP_RSS)) {
135		mlx4_warn(mdev, "UDP RSS is not supported on this device\n");
136		params->udp_rss = 0;
137	}
138	for (i = 1; i <= MLX4_MAX_PORTS; i++) {
139		params->prof[i].rx_pause = 1;
140		params->prof[i].rx_ppp = pfcrx;
141		params->prof[i].tx_pause = 1;
142		params->prof[i].tx_ppp = pfctx;
143		params->prof[i].tx_ring_size = MLX4_EN_DEF_TX_RING_SIZE;
144		params->prof[i].rx_ring_size = MLX4_EN_DEF_RX_RING_SIZE;
145		params->prof[i].tx_ring_num = params->num_tx_rings_p_up *
146			MLX4_EN_NUM_UP;
147		params->prof[i].rss_rings = 0;
148		params->prof[i].inline_thold = inline_thold;
149	}
150
151	return 0;
152}
153
154static void *mlx4_en_get_netdev(struct mlx4_dev *dev, void *ctx, u8 port)
155{
156	struct mlx4_en_dev *endev = ctx;
157
158	return endev->pndev[port];
159}
160
161static void mlx4_en_event(struct mlx4_dev *dev, void *endev_ptr,
162			  enum mlx4_dev_event event, unsigned long port)
163{
164	struct mlx4_en_dev *mdev = (struct mlx4_en_dev *) endev_ptr;
165	struct mlx4_en_priv *priv;
166
167	switch (event) {
168	case MLX4_DEV_EVENT_PORT_UP:
169	case MLX4_DEV_EVENT_PORT_DOWN:
170		if (!mdev->pndev[port])
171			return;
172		priv = netdev_priv(mdev->pndev[port]);
173		/* To prevent races, we poll the link state in a separate
174		  task rather than changing it here */
175		priv->link_state = event;
176		queue_work(mdev->workqueue, &priv->linkstate_task);
177		break;
178
179	case MLX4_DEV_EVENT_CATASTROPHIC_ERROR:
180		mlx4_err(mdev, "Internal error detected, restarting device\n");
181		break;
182
183	case MLX4_DEV_EVENT_SLAVE_INIT:
184	case MLX4_DEV_EVENT_SLAVE_SHUTDOWN:
185		break;
186	default:
187		if (port < 1 || port > dev->caps.num_ports ||
188		    !mdev->pndev[port])
189			return;
190		mlx4_warn(mdev, "Unhandled event %d for port %d\n", event,
191			  (int) port);
192	}
193}
194
195static void mlx4_en_remove(struct mlx4_dev *dev, void *endev_ptr)
196{
197	struct mlx4_en_dev *mdev = endev_ptr;
198	int i;
199
200	mutex_lock(&mdev->state_lock);
201	mdev->device_up = false;
202	mutex_unlock(&mdev->state_lock);
203
204	mlx4_foreach_port(i, dev, MLX4_PORT_TYPE_ETH)
205		if (mdev->pndev[i])
206			mlx4_en_destroy_netdev(mdev->pndev[i]);
207
208	if (mdev->dev->caps.flags2 & MLX4_DEV_CAP_FLAG2_TS)
209		mlx4_en_remove_timestamp(mdev);
210
211	flush_workqueue(mdev->workqueue);
212	destroy_workqueue(mdev->workqueue);
213	(void) mlx4_mr_free(dev, &mdev->mr);
214	iounmap(mdev->uar_map);
215	mlx4_uar_free(dev, &mdev->priv_uar);
216	mlx4_pd_free(dev, mdev->priv_pdn);
217	kfree(mdev);
218}
219
220static void *mlx4_en_add(struct mlx4_dev *dev)
221{
222	struct mlx4_en_dev *mdev;
223	int i;
224	int err;
225
226	printk_once(KERN_INFO "%s", mlx4_en_version);
227
228	mdev = kzalloc(sizeof(*mdev), GFP_KERNEL);
229	if (!mdev) {
230		err = -ENOMEM;
231		goto err_free_res;
232	}
233
234	if (mlx4_pd_alloc(dev, &mdev->priv_pdn))
235		goto err_free_dev;
236
237	if (mlx4_uar_alloc(dev, &mdev->priv_uar))
238		goto err_pd;
239
240	mdev->uar_map = ioremap((phys_addr_t) mdev->priv_uar.pfn << PAGE_SHIFT,
241				PAGE_SIZE);
242	if (!mdev->uar_map)
243		goto err_uar;
244	spin_lock_init(&mdev->uar_lock);
245
246	mdev->dev = dev;
247	mdev->dma_device = &(dev->pdev->dev);
248	mdev->pdev = dev->pdev;
249	mdev->device_up = false;
250
251	mdev->LSO_support = !!(dev->caps.flags & (1 << 15));
252	if (!mdev->LSO_support)
253		mlx4_warn(mdev, "LSO not supported, please upgrade to later FW version to enable LSO\n");
254
255	if (mlx4_mr_alloc(mdev->dev, mdev->priv_pdn, 0, ~0ull,
256			 MLX4_PERM_LOCAL_WRITE |  MLX4_PERM_LOCAL_READ,
257			 0, 0, &mdev->mr)) {
258		mlx4_err(mdev, "Failed allocating memory region\n");
259		goto err_map;
260	}
261	if (mlx4_mr_enable(mdev->dev, &mdev->mr)) {
262		mlx4_err(mdev, "Failed enabling memory region\n");
263		goto err_mr;
264	}
265
266	/* Build device profile according to supplied module parameters */
267	err = mlx4_en_get_profile(mdev);
268	if (err) {
269		mlx4_err(mdev, "Bad module parameters, aborting\n");
270		goto err_mr;
271	}
272
273	/* Configure which ports to start according to module parameters */
274	mdev->port_cnt = 0;
275	mlx4_foreach_port(i, dev, MLX4_PORT_TYPE_ETH)
276		mdev->port_cnt++;
277
278	/* Initialize time stamp mechanism */
279	if (mdev->dev->caps.flags2 & MLX4_DEV_CAP_FLAG2_TS)
280		mlx4_en_init_timestamp(mdev);
281
282	/* Set default number of RX rings*/
283	mlx4_en_set_num_rx_rings(mdev);
284
285	/* Create our own workqueue for reset/multicast tasks
286	 * Note: we cannot use the shared workqueue because of deadlocks caused
287	 *       by the rtnl lock */
288	mdev->workqueue = create_singlethread_workqueue("mlx4_en");
289	if (!mdev->workqueue) {
290		err = -ENOMEM;
291		goto err_mr;
292	}
293
294	/* At this stage all non-port specific tasks are complete:
295	 * mark the card state as up */
296	mutex_init(&mdev->state_lock);
297	mdev->device_up = true;
298
299	/* Setup ports */
300
301	/* Create a netdev for each port */
302	mlx4_foreach_port(i, dev, MLX4_PORT_TYPE_ETH) {
303		mlx4_info(mdev, "Activating port:%d\n", i);
304		if (mlx4_en_init_netdev(mdev, i, &mdev->profile.prof[i]))
305			mdev->pndev[i] = NULL;
306	}
307
308	return mdev;
309
310err_mr:
311	(void) mlx4_mr_free(dev, &mdev->mr);
312err_map:
313	if (mdev->uar_map)
314		iounmap(mdev->uar_map);
315err_uar:
316	mlx4_uar_free(dev, &mdev->priv_uar);
317err_pd:
318	mlx4_pd_free(dev, mdev->priv_pdn);
319err_free_dev:
320	kfree(mdev);
321err_free_res:
322	return NULL;
323}
324
325static struct mlx4_interface mlx4_en_interface = {
326	.add		= mlx4_en_add,
327	.remove		= mlx4_en_remove,
328	.event		= mlx4_en_event,
329	.get_dev	= mlx4_en_get_netdev,
330	.protocol	= MLX4_PROT_ETH,
331};
332
333static void mlx4_en_verify_params(void)
334{
335	if (pfctx > MAX_PFC_TX) {
336		pr_warn("mlx4_en: WARNING: illegal module parameter pfctx 0x%x - should be in range 0-0x%x, will be changed to default (0)\n",
337			pfctx, MAX_PFC_TX);
338		pfctx = 0;
339	}
340
341	if (pfcrx > MAX_PFC_RX) {
342		pr_warn("mlx4_en: WARNING: illegal module parameter pfcrx 0x%x - should be in range 0-0x%x, will be changed to default (0)\n",
343			pfcrx, MAX_PFC_RX);
344		pfcrx = 0;
345	}
346
347	if (inline_thold < MIN_PKT_LEN || inline_thold > MAX_INLINE) {
348		pr_warn("mlx4_en: WARNING: illegal module parameter inline_thold %d - should be in range %d-%d, will be changed to default (%d)\n",
349			inline_thold, MIN_PKT_LEN, MAX_INLINE, MAX_INLINE);
350		inline_thold = MAX_INLINE;
351	}
352}
353
354static int __init mlx4_en_init(void)
355{
356	mlx4_en_verify_params();
357
358	return mlx4_register_interface(&mlx4_en_interface);
359}
360
361static void __exit mlx4_en_cleanup(void)
362{
363	mlx4_unregister_interface(&mlx4_en_interface);
364}
365
366module_init(mlx4_en_init);
367module_exit(mlx4_en_cleanup);
368
369