1/* 2 * Copyright (c) 2006, 2007 Cisco Systems, Inc. All rights reserved. 3 * Copyright (c) 2007, 2008 Mellanox Technologies. All rights reserved. 4 * 5 * This software is available to you under a choice of one of two 6 * licenses. You may choose to be licensed under the terms of the GNU 7 * General Public License (GPL) Version 2, available from the file 8 * COPYING in the main directory of this source tree, or the 9 * OpenIB.org BSD license below: 10 * 11 * Redistribution and use in source and binary forms, with or 12 * without modification, are permitted provided that the following 13 * conditions are met: 14 * 15 * - Redistributions of source code must retain the above 16 * copyright notice, this list of conditions and the following 17 * disclaimer. 18 * 19 * - Redistributions in binary form must reproduce the above 20 * copyright notice, this list of conditions and the following 21 * disclaimer in the documentation and/or other materials 22 * provided with the distribution. 23 * 24 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, 25 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF 26 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND 27 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS 28 * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN 29 * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN 30 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE 31 * SOFTWARE. 32 */ 33 34#include <linux/errno.h> 35#include <linux/pci.h> 36#include <linux/delay.h> 37#include <linux/slab.h> 38#include <linux/jiffies.h> 39 40#include "mlx4.h" 41 42int mlx4_reset(struct mlx4_dev *dev) 43{ 44 void __iomem *reset; 45 u32 *hca_header = NULL; 46 int pcie_cap; 47 u16 devctl; 48 u16 linkctl; 49 u16 vendor; 50 unsigned long end; 51 u32 sem; 52 int i; 53 int err = 0; 54 55#define MLX4_RESET_BASE 0xf0000 56#define MLX4_RESET_SIZE 0x400 57#define MLX4_SEM_OFFSET 0x3fc 58#define MLX4_RESET_OFFSET 0x10 59#define MLX4_RESET_VALUE swab32(1) 60 61#define MLX4_SEM_TIMEOUT_JIFFIES (10 * HZ) 62#define MLX4_RESET_TIMEOUT_JIFFIES (2 * HZ) 63 64 /* 65 * Reset the chip. This is somewhat ugly because we have to 66 * save off the PCI header before reset and then restore it 67 * after the chip reboots. We skip config space offsets 22 68 * and 23 since those have a special meaning. 69 */ 70 71 /* Do we need to save off the full 4K PCI Express header?? */ 72 hca_header = kmalloc(256, GFP_KERNEL); 73 if (!hca_header) { 74 err = -ENOMEM; 75 mlx4_err(dev, "Couldn't allocate memory to save HCA PCI header, aborting\n"); 76 goto out; 77 } 78 79 pcie_cap = pci_pcie_cap(dev->pdev); 80 81 for (i = 0; i < 64; ++i) { 82 if (i == 22 || i == 23) 83 continue; 84 if (pci_read_config_dword(dev->pdev, i * 4, hca_header + i)) { 85 err = -ENODEV; 86 mlx4_err(dev, "Couldn't save HCA PCI header, aborting\n"); 87 goto out; 88 } 89 } 90 91 reset = ioremap(pci_resource_start(dev->pdev, 0) + MLX4_RESET_BASE, 92 MLX4_RESET_SIZE); 93 if (!reset) { 94 err = -ENOMEM; 95 mlx4_err(dev, "Couldn't map HCA reset register, aborting\n"); 96 goto out; 97 } 98 99 /* grab HW semaphore to lock out flash updates */ 100 end = jiffies + MLX4_SEM_TIMEOUT_JIFFIES; 101 do { 102 sem = readl(reset + MLX4_SEM_OFFSET); 103 if (!sem) 104 break; 105 106 msleep(1); 107 } while (time_before(jiffies, end)); 108 109 if (sem) { 110 mlx4_err(dev, "Failed to obtain HW semaphore, aborting\n"); 111 err = -EAGAIN; 112 iounmap(reset); 113 goto out; 114 } 115 116 /* actually hit reset */ 117 writel(MLX4_RESET_VALUE, reset + MLX4_RESET_OFFSET); 118 iounmap(reset); 119 120 /* Docs say to wait one second before accessing device */ 121 msleep(1000); 122 123 end = jiffies + MLX4_RESET_TIMEOUT_JIFFIES; 124 do { 125 if (!pci_read_config_word(dev->pdev, PCI_VENDOR_ID, &vendor) && 126 vendor != 0xffff) 127 break; 128 129 msleep(1); 130 } while (time_before(jiffies, end)); 131 132 if (vendor == 0xffff) { 133 err = -ENODEV; 134 mlx4_err(dev, "PCI device did not come back after reset, aborting\n"); 135 goto out; 136 } 137 138 /* Now restore the PCI headers */ 139 if (pcie_cap) { 140 devctl = hca_header[(pcie_cap + PCI_EXP_DEVCTL) / 4]; 141 if (pcie_capability_write_word(dev->pdev, PCI_EXP_DEVCTL, 142 devctl)) { 143 err = -ENODEV; 144 mlx4_err(dev, "Couldn't restore HCA PCI Express Device Control register, aborting\n"); 145 goto out; 146 } 147 linkctl = hca_header[(pcie_cap + PCI_EXP_LNKCTL) / 4]; 148 if (pcie_capability_write_word(dev->pdev, PCI_EXP_LNKCTL, 149 linkctl)) { 150 err = -ENODEV; 151 mlx4_err(dev, "Couldn't restore HCA PCI Express Link control register, aborting\n"); 152 goto out; 153 } 154 } 155 156 for (i = 0; i < 16; ++i) { 157 if (i * 4 == PCI_COMMAND) 158 continue; 159 160 if (pci_write_config_dword(dev->pdev, i * 4, hca_header[i])) { 161 err = -ENODEV; 162 mlx4_err(dev, "Couldn't restore HCA reg %x, aborting\n", 163 i); 164 goto out; 165 } 166 } 167 168 if (pci_write_config_dword(dev->pdev, PCI_COMMAND, 169 hca_header[PCI_COMMAND / 4])) { 170 err = -ENODEV; 171 mlx4_err(dev, "Couldn't restore HCA COMMAND, aborting\n"); 172 goto out; 173 } 174 175out: 176 kfree(hca_header); 177 178 return err; 179} 180