1/******************************************************************************* 2 3 Intel PRO/1000 Linux driver 4 Copyright(c) 1999 - 2006 Intel Corporation. 5 6 This program is free software; you can redistribute it and/or modify it 7 under the terms and conditions of the GNU General Public License, 8 version 2, as published by the Free Software Foundation. 9 10 This program is distributed in the hope it will be useful, but WITHOUT 11 ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 12 FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 13 more details. 14 15 You should have received a copy of the GNU General Public License along with 16 this program; if not, write to the Free Software Foundation, Inc., 17 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. 18 19 The full GNU General Public License is included in this distribution in 20 the file called "COPYING". 21 22 Contact Information: 23 Linux NICS <linux.nics@intel.com> 24 e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> 25 Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 26 27*******************************************************************************/ 28 29/* e1000_hw.h 30 * Structures, enums, and macros for the MAC 31 */ 32 33#ifndef _E1000_HW_H_ 34#define _E1000_HW_H_ 35 36#include "e1000_osdep.h" 37 38 39/* Forward declarations of structures used by the shared code */ 40struct e1000_hw; 41struct e1000_hw_stats; 42 43/* Enumerated types specific to the e1000 hardware */ 44/* Media Access Controllers */ 45typedef enum { 46 e1000_undefined = 0, 47 e1000_82542_rev2_0, 48 e1000_82542_rev2_1, 49 e1000_82543, 50 e1000_82544, 51 e1000_82540, 52 e1000_82545, 53 e1000_82545_rev_3, 54 e1000_82546, 55 e1000_ce4100, 56 e1000_82546_rev_3, 57 e1000_82541, 58 e1000_82541_rev_2, 59 e1000_82547, 60 e1000_82547_rev_2, 61 e1000_num_macs 62} e1000_mac_type; 63 64typedef enum { 65 e1000_eeprom_uninitialized = 0, 66 e1000_eeprom_spi, 67 e1000_eeprom_microwire, 68 e1000_eeprom_flash, 69 e1000_eeprom_none, /* No NVM support */ 70 e1000_num_eeprom_types 71} e1000_eeprom_type; 72 73/* Media Types */ 74typedef enum { 75 e1000_media_type_copper = 0, 76 e1000_media_type_fiber = 1, 77 e1000_media_type_internal_serdes = 2, 78 e1000_num_media_types 79} e1000_media_type; 80 81typedef enum { 82 e1000_10_half = 0, 83 e1000_10_full = 1, 84 e1000_100_half = 2, 85 e1000_100_full = 3 86} e1000_speed_duplex_type; 87 88/* Flow Control Settings */ 89typedef enum { 90 E1000_FC_NONE = 0, 91 E1000_FC_RX_PAUSE = 1, 92 E1000_FC_TX_PAUSE = 2, 93 E1000_FC_FULL = 3, 94 E1000_FC_DEFAULT = 0xFF 95} e1000_fc_type; 96 97struct e1000_shadow_ram { 98 u16 eeprom_word; 99 bool modified; 100}; 101 102/* PCI bus types */ 103typedef enum { 104 e1000_bus_type_unknown = 0, 105 e1000_bus_type_pci, 106 e1000_bus_type_pcix, 107 e1000_bus_type_reserved 108} e1000_bus_type; 109 110/* PCI bus speeds */ 111typedef enum { 112 e1000_bus_speed_unknown = 0, 113 e1000_bus_speed_33, 114 e1000_bus_speed_66, 115 e1000_bus_speed_100, 116 e1000_bus_speed_120, 117 e1000_bus_speed_133, 118 e1000_bus_speed_reserved 119} e1000_bus_speed; 120 121/* PCI bus widths */ 122typedef enum { 123 e1000_bus_width_unknown = 0, 124 e1000_bus_width_32, 125 e1000_bus_width_64, 126 e1000_bus_width_reserved 127} e1000_bus_width; 128 129/* PHY status info structure and supporting enums */ 130typedef enum { 131 e1000_cable_length_50 = 0, 132 e1000_cable_length_50_80, 133 e1000_cable_length_80_110, 134 e1000_cable_length_110_140, 135 e1000_cable_length_140, 136 e1000_cable_length_undefined = 0xFF 137} e1000_cable_length; 138 139typedef enum { 140 e1000_gg_cable_length_60 = 0, 141 e1000_gg_cable_length_60_115 = 1, 142 e1000_gg_cable_length_115_150 = 2, 143 e1000_gg_cable_length_150 = 4 144} e1000_gg_cable_length; 145 146typedef enum { 147 e1000_igp_cable_length_10 = 10, 148 e1000_igp_cable_length_20 = 20, 149 e1000_igp_cable_length_30 = 30, 150 e1000_igp_cable_length_40 = 40, 151 e1000_igp_cable_length_50 = 50, 152 e1000_igp_cable_length_60 = 60, 153 e1000_igp_cable_length_70 = 70, 154 e1000_igp_cable_length_80 = 80, 155 e1000_igp_cable_length_90 = 90, 156 e1000_igp_cable_length_100 = 100, 157 e1000_igp_cable_length_110 = 110, 158 e1000_igp_cable_length_115 = 115, 159 e1000_igp_cable_length_120 = 120, 160 e1000_igp_cable_length_130 = 130, 161 e1000_igp_cable_length_140 = 140, 162 e1000_igp_cable_length_150 = 150, 163 e1000_igp_cable_length_160 = 160, 164 e1000_igp_cable_length_170 = 170, 165 e1000_igp_cable_length_180 = 180 166} e1000_igp_cable_length; 167 168typedef enum { 169 e1000_10bt_ext_dist_enable_normal = 0, 170 e1000_10bt_ext_dist_enable_lower, 171 e1000_10bt_ext_dist_enable_undefined = 0xFF 172} e1000_10bt_ext_dist_enable; 173 174typedef enum { 175 e1000_rev_polarity_normal = 0, 176 e1000_rev_polarity_reversed, 177 e1000_rev_polarity_undefined = 0xFF 178} e1000_rev_polarity; 179 180typedef enum { 181 e1000_downshift_normal = 0, 182 e1000_downshift_activated, 183 e1000_downshift_undefined = 0xFF 184} e1000_downshift; 185 186typedef enum { 187 e1000_smart_speed_default = 0, 188 e1000_smart_speed_on, 189 e1000_smart_speed_off 190} e1000_smart_speed; 191 192typedef enum { 193 e1000_polarity_reversal_enabled = 0, 194 e1000_polarity_reversal_disabled, 195 e1000_polarity_reversal_undefined = 0xFF 196} e1000_polarity_reversal; 197 198typedef enum { 199 e1000_auto_x_mode_manual_mdi = 0, 200 e1000_auto_x_mode_manual_mdix, 201 e1000_auto_x_mode_auto1, 202 e1000_auto_x_mode_auto2, 203 e1000_auto_x_mode_undefined = 0xFF 204} e1000_auto_x_mode; 205 206typedef enum { 207 e1000_1000t_rx_status_not_ok = 0, 208 e1000_1000t_rx_status_ok, 209 e1000_1000t_rx_status_undefined = 0xFF 210} e1000_1000t_rx_status; 211 212typedef enum { 213 e1000_phy_m88 = 0, 214 e1000_phy_igp, 215 e1000_phy_8211, 216 e1000_phy_8201, 217 e1000_phy_undefined = 0xFF 218} e1000_phy_type; 219 220typedef enum { 221 e1000_ms_hw_default = 0, 222 e1000_ms_force_master, 223 e1000_ms_force_slave, 224 e1000_ms_auto 225} e1000_ms_type; 226 227typedef enum { 228 e1000_ffe_config_enabled = 0, 229 e1000_ffe_config_active, 230 e1000_ffe_config_blocked 231} e1000_ffe_config; 232 233typedef enum { 234 e1000_dsp_config_disabled = 0, 235 e1000_dsp_config_enabled, 236 e1000_dsp_config_activated, 237 e1000_dsp_config_undefined = 0xFF 238} e1000_dsp_config; 239 240struct e1000_phy_info { 241 e1000_cable_length cable_length; 242 e1000_10bt_ext_dist_enable extended_10bt_distance; 243 e1000_rev_polarity cable_polarity; 244 e1000_downshift downshift; 245 e1000_polarity_reversal polarity_correction; 246 e1000_auto_x_mode mdix_mode; 247 e1000_1000t_rx_status local_rx; 248 e1000_1000t_rx_status remote_rx; 249}; 250 251struct e1000_phy_stats { 252 u32 idle_errors; 253 u32 receive_errors; 254}; 255 256struct e1000_eeprom_info { 257 e1000_eeprom_type type; 258 u16 word_size; 259 u16 opcode_bits; 260 u16 address_bits; 261 u16 delay_usec; 262 u16 page_size; 263}; 264 265/* Flex ASF Information */ 266#define E1000_HOST_IF_MAX_SIZE 2048 267 268typedef enum { 269 e1000_byte_align = 0, 270 e1000_word_align = 1, 271 e1000_dword_align = 2 272} e1000_align_type; 273 274/* Error Codes */ 275#define E1000_SUCCESS 0 276#define E1000_ERR_EEPROM 1 277#define E1000_ERR_PHY 2 278#define E1000_ERR_CONFIG 3 279#define E1000_ERR_PARAM 4 280#define E1000_ERR_MAC_TYPE 5 281#define E1000_ERR_PHY_TYPE 6 282#define E1000_ERR_RESET 9 283#define E1000_ERR_MASTER_REQUESTS_PENDING 10 284#define E1000_ERR_HOST_INTERFACE_COMMAND 11 285#define E1000_BLK_PHY_RESET 12 286 287#define E1000_BYTE_SWAP_WORD(_value) ((((_value) & 0x00ff) << 8) | \ 288 (((_value) & 0xff00) >> 8)) 289 290/* Function prototypes */ 291/* Initialization */ 292s32 e1000_reset_hw(struct e1000_hw *hw); 293s32 e1000_init_hw(struct e1000_hw *hw); 294s32 e1000_set_mac_type(struct e1000_hw *hw); 295void e1000_set_media_type(struct e1000_hw *hw); 296 297/* Link Configuration */ 298s32 e1000_setup_link(struct e1000_hw *hw); 299s32 e1000_phy_setup_autoneg(struct e1000_hw *hw); 300void e1000_config_collision_dist(struct e1000_hw *hw); 301s32 e1000_check_for_link(struct e1000_hw *hw); 302s32 e1000_get_speed_and_duplex(struct e1000_hw *hw, u16 * speed, u16 * duplex); 303s32 e1000_force_mac_fc(struct e1000_hw *hw); 304 305/* PHY */ 306s32 e1000_read_phy_reg(struct e1000_hw *hw, u32 reg_addr, u16 * phy_data); 307s32 e1000_write_phy_reg(struct e1000_hw *hw, u32 reg_addr, u16 data); 308s32 e1000_phy_hw_reset(struct e1000_hw *hw); 309s32 e1000_phy_reset(struct e1000_hw *hw); 310s32 e1000_phy_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info); 311s32 e1000_validate_mdi_setting(struct e1000_hw *hw); 312 313/* EEPROM Functions */ 314s32 e1000_init_eeprom_params(struct e1000_hw *hw); 315 316/* MNG HOST IF functions */ 317u32 e1000_enable_mng_pass_thru(struct e1000_hw *hw); 318 319#define E1000_MNG_DHCP_TX_PAYLOAD_CMD 64 320#define E1000_HI_MAX_MNG_DATA_LENGTH 0x6F8 /* Host Interface data length */ 321 322#define E1000_MNG_DHCP_COMMAND_TIMEOUT 10 /* Time in ms to process MNG command */ 323#define E1000_MNG_DHCP_COOKIE_OFFSET 0x6F0 /* Cookie offset */ 324#define E1000_MNG_DHCP_COOKIE_LENGTH 0x10 /* Cookie length */ 325#define E1000_MNG_IAMT_MODE 0x3 326#define E1000_MNG_ICH_IAMT_MODE 0x2 327#define E1000_IAMT_SIGNATURE 0x544D4149 /* Intel(R) Active Management Technology signature */ 328 329#define E1000_MNG_DHCP_COOKIE_STATUS_PARSING_SUPPORT 0x1 /* DHCP parsing enabled */ 330#define E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT 0x2 /* DHCP parsing enabled */ 331#define E1000_VFTA_ENTRY_SHIFT 0x5 332#define E1000_VFTA_ENTRY_MASK 0x7F 333#define E1000_VFTA_ENTRY_BIT_SHIFT_MASK 0x1F 334 335struct e1000_host_mng_command_header { 336 u8 command_id; 337 u8 checksum; 338 u16 reserved1; 339 u16 reserved2; 340 u16 command_length; 341}; 342 343struct e1000_host_mng_command_info { 344 struct e1000_host_mng_command_header command_header; /* Command Head/Command Result Head has 4 bytes */ 345 u8 command_data[E1000_HI_MAX_MNG_DATA_LENGTH]; /* Command data can length 0..0x658 */ 346}; 347#ifdef __BIG_ENDIAN 348struct e1000_host_mng_dhcp_cookie { 349 u32 signature; 350 u16 vlan_id; 351 u8 reserved0; 352 u8 status; 353 u32 reserved1; 354 u8 checksum; 355 u8 reserved3; 356 u16 reserved2; 357}; 358#else 359struct e1000_host_mng_dhcp_cookie { 360 u32 signature; 361 u8 status; 362 u8 reserved0; 363 u16 vlan_id; 364 u32 reserved1; 365 u16 reserved2; 366 u8 reserved3; 367 u8 checksum; 368}; 369#endif 370 371bool e1000_check_mng_mode(struct e1000_hw *hw); 372s32 e1000_read_eeprom(struct e1000_hw *hw, u16 reg, u16 words, u16 * data); 373s32 e1000_validate_eeprom_checksum(struct e1000_hw *hw); 374s32 e1000_update_eeprom_checksum(struct e1000_hw *hw); 375s32 e1000_write_eeprom(struct e1000_hw *hw, u16 reg, u16 words, u16 * data); 376s32 e1000_read_mac_addr(struct e1000_hw *hw); 377 378/* Filters (multicast, vlan, receive) */ 379u32 e1000_hash_mc_addr(struct e1000_hw *hw, u8 * mc_addr); 380void e1000_mta_set(struct e1000_hw *hw, u32 hash_value); 381void e1000_rar_set(struct e1000_hw *hw, u8 * mc_addr, u32 rar_index); 382void e1000_write_vfta(struct e1000_hw *hw, u32 offset, u32 value); 383 384/* LED functions */ 385s32 e1000_setup_led(struct e1000_hw *hw); 386s32 e1000_cleanup_led(struct e1000_hw *hw); 387s32 e1000_led_on(struct e1000_hw *hw); 388s32 e1000_led_off(struct e1000_hw *hw); 389s32 e1000_blink_led_start(struct e1000_hw *hw); 390 391/* Adaptive IFS Functions */ 392 393/* Everything else */ 394void e1000_reset_adaptive(struct e1000_hw *hw); 395void e1000_update_adaptive(struct e1000_hw *hw); 396void e1000_get_bus_info(struct e1000_hw *hw); 397void e1000_pci_set_mwi(struct e1000_hw *hw); 398void e1000_pci_clear_mwi(struct e1000_hw *hw); 399void e1000_pcix_set_mmrbc(struct e1000_hw *hw, int mmrbc); 400int e1000_pcix_get_mmrbc(struct e1000_hw *hw); 401/* Port I/O is only supported on 82544 and newer */ 402void e1000_io_write(struct e1000_hw *hw, unsigned long port, u32 value); 403 404#define E1000_READ_REG_IO(a, reg) \ 405 e1000_read_reg_io((a), E1000_##reg) 406#define E1000_WRITE_REG_IO(a, reg, val) \ 407 e1000_write_reg_io((a), E1000_##reg, val) 408 409/* PCI Device IDs */ 410#define E1000_DEV_ID_82542 0x1000 411#define E1000_DEV_ID_82543GC_FIBER 0x1001 412#define E1000_DEV_ID_82543GC_COPPER 0x1004 413#define E1000_DEV_ID_82544EI_COPPER 0x1008 414#define E1000_DEV_ID_82544EI_FIBER 0x1009 415#define E1000_DEV_ID_82544GC_COPPER 0x100C 416#define E1000_DEV_ID_82544GC_LOM 0x100D 417#define E1000_DEV_ID_82540EM 0x100E 418#define E1000_DEV_ID_82540EM_LOM 0x1015 419#define E1000_DEV_ID_82540EP_LOM 0x1016 420#define E1000_DEV_ID_82540EP 0x1017 421#define E1000_DEV_ID_82540EP_LP 0x101E 422#define E1000_DEV_ID_82545EM_COPPER 0x100F 423#define E1000_DEV_ID_82545EM_FIBER 0x1011 424#define E1000_DEV_ID_82545GM_COPPER 0x1026 425#define E1000_DEV_ID_82545GM_FIBER 0x1027 426#define E1000_DEV_ID_82545GM_SERDES 0x1028 427#define E1000_DEV_ID_82546EB_COPPER 0x1010 428#define E1000_DEV_ID_82546EB_FIBER 0x1012 429#define E1000_DEV_ID_82546EB_QUAD_COPPER 0x101D 430#define E1000_DEV_ID_82541EI 0x1013 431#define E1000_DEV_ID_82541EI_MOBILE 0x1018 432#define E1000_DEV_ID_82541ER_LOM 0x1014 433#define E1000_DEV_ID_82541ER 0x1078 434#define E1000_DEV_ID_82547GI 0x1075 435#define E1000_DEV_ID_82541GI 0x1076 436#define E1000_DEV_ID_82541GI_MOBILE 0x1077 437#define E1000_DEV_ID_82541GI_LF 0x107C 438#define E1000_DEV_ID_82546GB_COPPER 0x1079 439#define E1000_DEV_ID_82546GB_FIBER 0x107A 440#define E1000_DEV_ID_82546GB_SERDES 0x107B 441#define E1000_DEV_ID_82546GB_PCIE 0x108A 442#define E1000_DEV_ID_82546GB_QUAD_COPPER 0x1099 443#define E1000_DEV_ID_82547EI 0x1019 444#define E1000_DEV_ID_82547EI_MOBILE 0x101A 445#define E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3 0x10B5 446#define E1000_DEV_ID_INTEL_CE4100_GBE 0x2E6E 447 448#define NODE_ADDRESS_SIZE 6 449 450/* MAC decode size is 128K - This is the size of BAR0 */ 451#define MAC_DECODE_SIZE (128 * 1024) 452 453#define E1000_82542_2_0_REV_ID 2 454#define E1000_82542_2_1_REV_ID 3 455#define E1000_REVISION_0 0 456#define E1000_REVISION_1 1 457#define E1000_REVISION_2 2 458#define E1000_REVISION_3 3 459 460#define SPEED_10 10 461#define SPEED_100 100 462#define SPEED_1000 1000 463#define HALF_DUPLEX 1 464#define FULL_DUPLEX 2 465 466/* The sizes (in bytes) of a ethernet packet */ 467#define ENET_HEADER_SIZE 14 468#define MINIMUM_ETHERNET_FRAME_SIZE 64 /* With FCS */ 469#define ETHERNET_FCS_SIZE 4 470#define MINIMUM_ETHERNET_PACKET_SIZE \ 471 (MINIMUM_ETHERNET_FRAME_SIZE - ETHERNET_FCS_SIZE) 472#define CRC_LENGTH ETHERNET_FCS_SIZE 473#define MAX_JUMBO_FRAME_SIZE 0x3F00 474 475/* 802.1q VLAN Packet Sizes */ 476#define VLAN_TAG_SIZE 4 /* 802.3ac tag (not DMAed) */ 477 478/* Ethertype field values */ 479#define ETHERNET_IEEE_VLAN_TYPE 0x8100 /* 802.3ac packet */ 480#define ETHERNET_IP_TYPE 0x0800 /* IP packets */ 481#define ETHERNET_ARP_TYPE 0x0806 /* Address Resolution Protocol (ARP) */ 482 483/* Packet Header defines */ 484#define IP_PROTOCOL_TCP 6 485#define IP_PROTOCOL_UDP 0x11 486 487/* This defines the bits that are set in the Interrupt Mask 488 * Set/Read Register. Each bit is documented below: 489 * o RXDMT0 = Receive Descriptor Minimum Threshold hit (ring 0) 490 * o RXSEQ = Receive Sequence Error 491 */ 492#define POLL_IMS_ENABLE_MASK ( \ 493 E1000_IMS_RXDMT0 | \ 494 E1000_IMS_RXSEQ) 495 496/* This defines the bits that are set in the Interrupt Mask 497 * Set/Read Register. Each bit is documented below: 498 * o RXT0 = Receiver Timer Interrupt (ring 0) 499 * o TXDW = Transmit Descriptor Written Back 500 * o RXDMT0 = Receive Descriptor Minimum Threshold hit (ring 0) 501 * o RXSEQ = Receive Sequence Error 502 * o LSC = Link Status Change 503 */ 504#define IMS_ENABLE_MASK ( \ 505 E1000_IMS_RXT0 | \ 506 E1000_IMS_TXDW | \ 507 E1000_IMS_RXDMT0 | \ 508 E1000_IMS_RXSEQ | \ 509 E1000_IMS_LSC) 510 511/* Number of high/low register pairs in the RAR. The RAR (Receive Address 512 * Registers) holds the directed and multicast addresses that we monitor. We 513 * reserve one of these spots for our directed address, allowing us room for 514 * E1000_RAR_ENTRIES - 1 multicast addresses. 515 */ 516#define E1000_RAR_ENTRIES 15 517 518#define MIN_NUMBER_OF_DESCRIPTORS 8 519#define MAX_NUMBER_OF_DESCRIPTORS 0xFFF8 520 521/* Receive Descriptor */ 522struct e1000_rx_desc { 523 __le64 buffer_addr; /* Address of the descriptor's data buffer */ 524 __le16 length; /* Length of data DMAed into data buffer */ 525 __le16 csum; /* Packet checksum */ 526 u8 status; /* Descriptor status */ 527 u8 errors; /* Descriptor Errors */ 528 __le16 special; 529}; 530 531/* Receive Descriptor - Extended */ 532union e1000_rx_desc_extended { 533 struct { 534 __le64 buffer_addr; 535 __le64 reserved; 536 } read; 537 struct { 538 struct { 539 __le32 mrq; /* Multiple Rx Queues */ 540 union { 541 __le32 rss; /* RSS Hash */ 542 struct { 543 __le16 ip_id; /* IP id */ 544 __le16 csum; /* Packet Checksum */ 545 } csum_ip; 546 } hi_dword; 547 } lower; 548 struct { 549 __le32 status_error; /* ext status/error */ 550 __le16 length; 551 __le16 vlan; /* VLAN tag */ 552 } upper; 553 } wb; /* writeback */ 554}; 555 556#define MAX_PS_BUFFERS 4 557/* Receive Descriptor - Packet Split */ 558union e1000_rx_desc_packet_split { 559 struct { 560 /* one buffer for protocol header(s), three data buffers */ 561 __le64 buffer_addr[MAX_PS_BUFFERS]; 562 } read; 563 struct { 564 struct { 565 __le32 mrq; /* Multiple Rx Queues */ 566 union { 567 __le32 rss; /* RSS Hash */ 568 struct { 569 __le16 ip_id; /* IP id */ 570 __le16 csum; /* Packet Checksum */ 571 } csum_ip; 572 } hi_dword; 573 } lower; 574 struct { 575 __le32 status_error; /* ext status/error */ 576 __le16 length0; /* length of buffer 0 */ 577 __le16 vlan; /* VLAN tag */ 578 } middle; 579 struct { 580 __le16 header_status; 581 __le16 length[3]; /* length of buffers 1-3 */ 582 } upper; 583 __le64 reserved; 584 } wb; /* writeback */ 585}; 586 587/* Receive Descriptor bit definitions */ 588#define E1000_RXD_STAT_DD 0x01 /* Descriptor Done */ 589#define E1000_RXD_STAT_EOP 0x02 /* End of Packet */ 590#define E1000_RXD_STAT_IXSM 0x04 /* Ignore checksum */ 591#define E1000_RXD_STAT_VP 0x08 /* IEEE VLAN Packet */ 592#define E1000_RXD_STAT_UDPCS 0x10 /* UDP xsum calculated */ 593#define E1000_RXD_STAT_TCPCS 0x20 /* TCP xsum calculated */ 594#define E1000_RXD_STAT_IPCS 0x40 /* IP xsum calculated */ 595#define E1000_RXD_STAT_PIF 0x80 /* passed in-exact filter */ 596#define E1000_RXD_STAT_IPIDV 0x200 /* IP identification valid */ 597#define E1000_RXD_STAT_UDPV 0x400 /* Valid UDP checksum */ 598#define E1000_RXD_STAT_ACK 0x8000 /* ACK Packet indication */ 599#define E1000_RXD_ERR_CE 0x01 /* CRC Error */ 600#define E1000_RXD_ERR_SE 0x02 /* Symbol Error */ 601#define E1000_RXD_ERR_SEQ 0x04 /* Sequence Error */ 602#define E1000_RXD_ERR_CXE 0x10 /* Carrier Extension Error */ 603#define E1000_RXD_ERR_TCPE 0x20 /* TCP/UDP Checksum Error */ 604#define E1000_RXD_ERR_IPE 0x40 /* IP Checksum Error */ 605#define E1000_RXD_ERR_RXE 0x80 /* Rx Data Error */ 606#define E1000_RXD_SPC_VLAN_MASK 0x0FFF /* VLAN ID is in lower 12 bits */ 607#define E1000_RXD_SPC_PRI_MASK 0xE000 /* Priority is in upper 3 bits */ 608#define E1000_RXD_SPC_PRI_SHIFT 13 609#define E1000_RXD_SPC_CFI_MASK 0x1000 /* CFI is bit 12 */ 610#define E1000_RXD_SPC_CFI_SHIFT 12 611 612#define E1000_RXDEXT_STATERR_CE 0x01000000 613#define E1000_RXDEXT_STATERR_SE 0x02000000 614#define E1000_RXDEXT_STATERR_SEQ 0x04000000 615#define E1000_RXDEXT_STATERR_CXE 0x10000000 616#define E1000_RXDEXT_STATERR_TCPE 0x20000000 617#define E1000_RXDEXT_STATERR_IPE 0x40000000 618#define E1000_RXDEXT_STATERR_RXE 0x80000000 619 620#define E1000_RXDPS_HDRSTAT_HDRSP 0x00008000 621#define E1000_RXDPS_HDRSTAT_HDRLEN_MASK 0x000003FF 622 623/* mask to determine if packets should be dropped due to frame errors */ 624#define E1000_RXD_ERR_FRAME_ERR_MASK ( \ 625 E1000_RXD_ERR_CE | \ 626 E1000_RXD_ERR_SE | \ 627 E1000_RXD_ERR_SEQ | \ 628 E1000_RXD_ERR_CXE | \ 629 E1000_RXD_ERR_RXE) 630 631/* Same mask, but for extended and packet split descriptors */ 632#define E1000_RXDEXT_ERR_FRAME_ERR_MASK ( \ 633 E1000_RXDEXT_STATERR_CE | \ 634 E1000_RXDEXT_STATERR_SE | \ 635 E1000_RXDEXT_STATERR_SEQ | \ 636 E1000_RXDEXT_STATERR_CXE | \ 637 E1000_RXDEXT_STATERR_RXE) 638 639/* Transmit Descriptor */ 640struct e1000_tx_desc { 641 __le64 buffer_addr; /* Address of the descriptor's data buffer */ 642 union { 643 __le32 data; 644 struct { 645 __le16 length; /* Data buffer length */ 646 u8 cso; /* Checksum offset */ 647 u8 cmd; /* Descriptor control */ 648 } flags; 649 } lower; 650 union { 651 __le32 data; 652 struct { 653 u8 status; /* Descriptor status */ 654 u8 css; /* Checksum start */ 655 __le16 special; 656 } fields; 657 } upper; 658}; 659 660/* Transmit Descriptor bit definitions */ 661#define E1000_TXD_DTYP_D 0x00100000 /* Data Descriptor */ 662#define E1000_TXD_DTYP_C 0x00000000 /* Context Descriptor */ 663#define E1000_TXD_POPTS_IXSM 0x01 /* Insert IP checksum */ 664#define E1000_TXD_POPTS_TXSM 0x02 /* Insert TCP/UDP checksum */ 665#define E1000_TXD_CMD_EOP 0x01000000 /* End of Packet */ 666#define E1000_TXD_CMD_IFCS 0x02000000 /* Insert FCS (Ethernet CRC) */ 667#define E1000_TXD_CMD_IC 0x04000000 /* Insert Checksum */ 668#define E1000_TXD_CMD_RS 0x08000000 /* Report Status */ 669#define E1000_TXD_CMD_RPS 0x10000000 /* Report Packet Sent */ 670#define E1000_TXD_CMD_DEXT 0x20000000 /* Descriptor extension (0 = legacy) */ 671#define E1000_TXD_CMD_VLE 0x40000000 /* Add VLAN tag */ 672#define E1000_TXD_CMD_IDE 0x80000000 /* Enable Tidv register */ 673#define E1000_TXD_STAT_DD 0x00000001 /* Descriptor Done */ 674#define E1000_TXD_STAT_EC 0x00000002 /* Excess Collisions */ 675#define E1000_TXD_STAT_LC 0x00000004 /* Late Collisions */ 676#define E1000_TXD_STAT_TU 0x00000008 /* Transmit underrun */ 677#define E1000_TXD_CMD_TCP 0x01000000 /* TCP packet */ 678#define E1000_TXD_CMD_IP 0x02000000 /* IP packet */ 679#define E1000_TXD_CMD_TSE 0x04000000 /* TCP Seg enable */ 680#define E1000_TXD_STAT_TC 0x00000004 /* Tx Underrun */ 681 682/* Offload Context Descriptor */ 683struct e1000_context_desc { 684 union { 685 __le32 ip_config; 686 struct { 687 u8 ipcss; /* IP checksum start */ 688 u8 ipcso; /* IP checksum offset */ 689 __le16 ipcse; /* IP checksum end */ 690 } ip_fields; 691 } lower_setup; 692 union { 693 __le32 tcp_config; 694 struct { 695 u8 tucss; /* TCP checksum start */ 696 u8 tucso; /* TCP checksum offset */ 697 __le16 tucse; /* TCP checksum end */ 698 } tcp_fields; 699 } upper_setup; 700 __le32 cmd_and_length; /* */ 701 union { 702 __le32 data; 703 struct { 704 u8 status; /* Descriptor status */ 705 u8 hdr_len; /* Header length */ 706 __le16 mss; /* Maximum segment size */ 707 } fields; 708 } tcp_seg_setup; 709}; 710 711/* Offload data descriptor */ 712struct e1000_data_desc { 713 __le64 buffer_addr; /* Address of the descriptor's buffer address */ 714 union { 715 __le32 data; 716 struct { 717 __le16 length; /* Data buffer length */ 718 u8 typ_len_ext; /* */ 719 u8 cmd; /* */ 720 } flags; 721 } lower; 722 union { 723 __le32 data; 724 struct { 725 u8 status; /* Descriptor status */ 726 u8 popts; /* Packet Options */ 727 __le16 special; /* */ 728 } fields; 729 } upper; 730}; 731 732/* Filters */ 733#define E1000_NUM_UNICAST 16 /* Unicast filter entries */ 734#define E1000_MC_TBL_SIZE 128 /* Multicast Filter Table (4096 bits) */ 735#define E1000_VLAN_FILTER_TBL_SIZE 128 /* VLAN Filter Table (4096 bits) */ 736 737/* Receive Address Register */ 738struct e1000_rar { 739 volatile __le32 low; /* receive address low */ 740 volatile __le32 high; /* receive address high */ 741}; 742 743/* Number of entries in the Multicast Table Array (MTA). */ 744#define E1000_NUM_MTA_REGISTERS 128 745 746/* IPv4 Address Table Entry */ 747struct e1000_ipv4_at_entry { 748 volatile u32 ipv4_addr; /* IP Address (RW) */ 749 volatile u32 reserved; 750}; 751 752/* Four wakeup IP addresses are supported */ 753#define E1000_WAKEUP_IP_ADDRESS_COUNT_MAX 4 754#define E1000_IP4AT_SIZE E1000_WAKEUP_IP_ADDRESS_COUNT_MAX 755#define E1000_IP6AT_SIZE 1 756 757/* IPv6 Address Table Entry */ 758struct e1000_ipv6_at_entry { 759 volatile u8 ipv6_addr[16]; 760}; 761 762/* Flexible Filter Length Table Entry */ 763struct e1000_fflt_entry { 764 volatile u32 length; /* Flexible Filter Length (RW) */ 765 volatile u32 reserved; 766}; 767 768/* Flexible Filter Mask Table Entry */ 769struct e1000_ffmt_entry { 770 volatile u32 mask; /* Flexible Filter Mask (RW) */ 771 volatile u32 reserved; 772}; 773 774/* Flexible Filter Value Table Entry */ 775struct e1000_ffvt_entry { 776 volatile u32 value; /* Flexible Filter Value (RW) */ 777 volatile u32 reserved; 778}; 779 780/* Four Flexible Filters are supported */ 781#define E1000_FLEXIBLE_FILTER_COUNT_MAX 4 782 783/* Each Flexible Filter is at most 128 (0x80) bytes in length */ 784#define E1000_FLEXIBLE_FILTER_SIZE_MAX 128 785 786#define E1000_FFLT_SIZE E1000_FLEXIBLE_FILTER_COUNT_MAX 787#define E1000_FFMT_SIZE E1000_FLEXIBLE_FILTER_SIZE_MAX 788#define E1000_FFVT_SIZE E1000_FLEXIBLE_FILTER_SIZE_MAX 789 790#define E1000_DISABLE_SERDES_LOOPBACK 0x0400 791 792/* Register Set. (82543, 82544) 793 * 794 * Registers are defined to be 32 bits and should be accessed as 32 bit values. 795 * These registers are physically located on the NIC, but are mapped into the 796 * host memory address space. 797 * 798 * RW - register is both readable and writable 799 * RO - register is read only 800 * WO - register is write only 801 * R/clr - register is read only and is cleared when read 802 * A - register array 803 */ 804#define E1000_CTRL 0x00000 /* Device Control - RW */ 805#define E1000_CTRL_DUP 0x00004 /* Device Control Duplicate (Shadow) - RW */ 806#define E1000_STATUS 0x00008 /* Device Status - RO */ 807#define E1000_EECD 0x00010 /* EEPROM/Flash Control - RW */ 808#define E1000_EERD 0x00014 /* EEPROM Read - RW */ 809#define E1000_CTRL_EXT 0x00018 /* Extended Device Control - RW */ 810#define E1000_FLA 0x0001C /* Flash Access - RW */ 811#define E1000_MDIC 0x00020 /* MDI Control - RW */ 812 813#define INTEL_CE_GBE_MDIO_RCOMP_BASE (hw->ce4100_gbe_mdio_base_virt) 814#define E1000_MDIO_STS (INTEL_CE_GBE_MDIO_RCOMP_BASE + 0) 815#define E1000_MDIO_CMD (INTEL_CE_GBE_MDIO_RCOMP_BASE + 4) 816#define E1000_MDIO_DRV (INTEL_CE_GBE_MDIO_RCOMP_BASE + 8) 817#define E1000_MDC_CMD (INTEL_CE_GBE_MDIO_RCOMP_BASE + 0xC) 818#define E1000_RCOMP_CTL (INTEL_CE_GBE_MDIO_RCOMP_BASE + 0x20) 819#define E1000_RCOMP_STS (INTEL_CE_GBE_MDIO_RCOMP_BASE + 0x24) 820 821#define E1000_SCTL 0x00024 /* SerDes Control - RW */ 822#define E1000_FEXTNVM 0x00028 /* Future Extended NVM register */ 823#define E1000_FCAL 0x00028 /* Flow Control Address Low - RW */ 824#define E1000_FCAH 0x0002C /* Flow Control Address High -RW */ 825#define E1000_FCT 0x00030 /* Flow Control Type - RW */ 826#define E1000_VET 0x00038 /* VLAN Ether Type - RW */ 827#define E1000_ICR 0x000C0 /* Interrupt Cause Read - R/clr */ 828#define E1000_ITR 0x000C4 /* Interrupt Throttling Rate - RW */ 829#define E1000_ICS 0x000C8 /* Interrupt Cause Set - WO */ 830#define E1000_IMS 0x000D0 /* Interrupt Mask Set - RW */ 831#define E1000_IMC 0x000D8 /* Interrupt Mask Clear - WO */ 832#define E1000_IAM 0x000E0 /* Interrupt Acknowledge Auto Mask */ 833 834/* Auxiliary Control Register. This register is CE4100 specific, 835 * RMII/RGMII function is switched by this register - RW 836 * Following are bits definitions of the Auxiliary Control Register 837 */ 838#define E1000_CTL_AUX 0x000E0 839#define E1000_CTL_AUX_END_SEL_SHIFT 10 840#define E1000_CTL_AUX_ENDIANESS_SHIFT 8 841#define E1000_CTL_AUX_RGMII_RMII_SHIFT 0 842 843/* descriptor and packet transfer use CTL_AUX.ENDIANESS */ 844#define E1000_CTL_AUX_DES_PKT (0x0 << E1000_CTL_AUX_END_SEL_SHIFT) 845/* descriptor use CTL_AUX.ENDIANESS, packet use default */ 846#define E1000_CTL_AUX_DES (0x1 << E1000_CTL_AUX_END_SEL_SHIFT) 847/* descriptor use default, packet use CTL_AUX.ENDIANESS */ 848#define E1000_CTL_AUX_PKT (0x2 << E1000_CTL_AUX_END_SEL_SHIFT) 849/* all use CTL_AUX.ENDIANESS */ 850#define E1000_CTL_AUX_ALL (0x3 << E1000_CTL_AUX_END_SEL_SHIFT) 851 852#define E1000_CTL_AUX_RGMII (0x0 << E1000_CTL_AUX_RGMII_RMII_SHIFT) 853#define E1000_CTL_AUX_RMII (0x1 << E1000_CTL_AUX_RGMII_RMII_SHIFT) 854 855/* LW little endian, Byte big endian */ 856#define E1000_CTL_AUX_LWLE_BBE (0x0 << E1000_CTL_AUX_ENDIANESS_SHIFT) 857#define E1000_CTL_AUX_LWLE_BLE (0x1 << E1000_CTL_AUX_ENDIANESS_SHIFT) 858#define E1000_CTL_AUX_LWBE_BBE (0x2 << E1000_CTL_AUX_ENDIANESS_SHIFT) 859#define E1000_CTL_AUX_LWBE_BLE (0x3 << E1000_CTL_AUX_ENDIANESS_SHIFT) 860 861#define E1000_RCTL 0x00100 /* RX Control - RW */ 862#define E1000_RDTR1 0x02820 /* RX Delay Timer (1) - RW */ 863#define E1000_RDBAL1 0x02900 /* RX Descriptor Base Address Low (1) - RW */ 864#define E1000_RDBAH1 0x02904 /* RX Descriptor Base Address High (1) - RW */ 865#define E1000_RDLEN1 0x02908 /* RX Descriptor Length (1) - RW */ 866#define E1000_RDH1 0x02910 /* RX Descriptor Head (1) - RW */ 867#define E1000_RDT1 0x02918 /* RX Descriptor Tail (1) - RW */ 868#define E1000_FCTTV 0x00170 /* Flow Control Transmit Timer Value - RW */ 869#define E1000_TXCW 0x00178 /* TX Configuration Word - RW */ 870#define E1000_RXCW 0x00180 /* RX Configuration Word - RO */ 871#define E1000_TCTL 0x00400 /* TX Control - RW */ 872#define E1000_TCTL_EXT 0x00404 /* Extended TX Control - RW */ 873#define E1000_TIPG 0x00410 /* TX Inter-packet gap -RW */ 874#define E1000_TBT 0x00448 /* TX Burst Timer - RW */ 875#define E1000_AIT 0x00458 /* Adaptive Interframe Spacing Throttle - RW */ 876#define E1000_LEDCTL 0x00E00 /* LED Control - RW */ 877#define E1000_EXTCNF_CTRL 0x00F00 /* Extended Configuration Control */ 878#define E1000_EXTCNF_SIZE 0x00F08 /* Extended Configuration Size */ 879#define E1000_PHY_CTRL 0x00F10 /* PHY Control Register in CSR */ 880#define FEXTNVM_SW_CONFIG 0x0001 881#define E1000_PBA 0x01000 /* Packet Buffer Allocation - RW */ 882#define E1000_PBS 0x01008 /* Packet Buffer Size */ 883#define E1000_EEMNGCTL 0x01010 /* MNG EEprom Control */ 884#define E1000_FLASH_UPDATES 1000 885#define E1000_EEARBC 0x01024 /* EEPROM Auto Read Bus Control */ 886#define E1000_FLASHT 0x01028 /* FLASH Timer Register */ 887#define E1000_EEWR 0x0102C /* EEPROM Write Register - RW */ 888#define E1000_FLSWCTL 0x01030 /* FLASH control register */ 889#define E1000_FLSWDATA 0x01034 /* FLASH data register */ 890#define E1000_FLSWCNT 0x01038 /* FLASH Access Counter */ 891#define E1000_FLOP 0x0103C /* FLASH Opcode Register */ 892#define E1000_ERT 0x02008 /* Early Rx Threshold - RW */ 893#define E1000_FCRTL 0x02160 /* Flow Control Receive Threshold Low - RW */ 894#define E1000_FCRTH 0x02168 /* Flow Control Receive Threshold High - RW */ 895#define E1000_PSRCTL 0x02170 /* Packet Split Receive Control - RW */ 896#define E1000_RDFH 0x02410 /* RX Data FIFO Head - RW */ 897#define E1000_RDFT 0x02418 /* RX Data FIFO Tail - RW */ 898#define E1000_RDFHS 0x02420 /* RX Data FIFO Head Saved - RW */ 899#define E1000_RDFTS 0x02428 /* RX Data FIFO Tail Saved - RW */ 900#define E1000_RDFPC 0x02430 /* RX Data FIFO Packet Count - RW */ 901#define E1000_RDBAL 0x02800 /* RX Descriptor Base Address Low - RW */ 902#define E1000_RDBAH 0x02804 /* RX Descriptor Base Address High - RW */ 903#define E1000_RDLEN 0x02808 /* RX Descriptor Length - RW */ 904#define E1000_RDH 0x02810 /* RX Descriptor Head - RW */ 905#define E1000_RDT 0x02818 /* RX Descriptor Tail - RW */ 906#define E1000_RDTR 0x02820 /* RX Delay Timer - RW */ 907#define E1000_RDBAL0 E1000_RDBAL /* RX Desc Base Address Low (0) - RW */ 908#define E1000_RDBAH0 E1000_RDBAH /* RX Desc Base Address High (0) - RW */ 909#define E1000_RDLEN0 E1000_RDLEN /* RX Desc Length (0) - RW */ 910#define E1000_RDH0 E1000_RDH /* RX Desc Head (0) - RW */ 911#define E1000_RDT0 E1000_RDT /* RX Desc Tail (0) - RW */ 912#define E1000_RDTR0 E1000_RDTR /* RX Delay Timer (0) - RW */ 913#define E1000_RXDCTL 0x02828 /* RX Descriptor Control queue 0 - RW */ 914#define E1000_RXDCTL1 0x02928 /* RX Descriptor Control queue 1 - RW */ 915#define E1000_RADV 0x0282C /* RX Interrupt Absolute Delay Timer - RW */ 916#define E1000_RSRPD 0x02C00 /* RX Small Packet Detect - RW */ 917#define E1000_RAID 0x02C08 /* Receive Ack Interrupt Delay - RW */ 918#define E1000_TXDMAC 0x03000 /* TX DMA Control - RW */ 919#define E1000_KABGTXD 0x03004 /* AFE Band Gap Transmit Ref Data */ 920#define E1000_TDFH 0x03410 /* TX Data FIFO Head - RW */ 921#define E1000_TDFT 0x03418 /* TX Data FIFO Tail - RW */ 922#define E1000_TDFHS 0x03420 /* TX Data FIFO Head Saved - RW */ 923#define E1000_TDFTS 0x03428 /* TX Data FIFO Tail Saved - RW */ 924#define E1000_TDFPC 0x03430 /* TX Data FIFO Packet Count - RW */ 925#define E1000_TDBAL 0x03800 /* TX Descriptor Base Address Low - RW */ 926#define E1000_TDBAH 0x03804 /* TX Descriptor Base Address High - RW */ 927#define E1000_TDLEN 0x03808 /* TX Descriptor Length - RW */ 928#define E1000_TDH 0x03810 /* TX Descriptor Head - RW */ 929#define E1000_TDT 0x03818 /* TX Descripotr Tail - RW */ 930#define E1000_TIDV 0x03820 /* TX Interrupt Delay Value - RW */ 931#define E1000_TXDCTL 0x03828 /* TX Descriptor Control - RW */ 932#define E1000_TADV 0x0382C /* TX Interrupt Absolute Delay Val - RW */ 933#define E1000_TSPMT 0x03830 /* TCP Segmentation PAD & Min Threshold - RW */ 934#define E1000_TARC0 0x03840 /* TX Arbitration Count (0) */ 935#define E1000_TDBAL1 0x03900 /* TX Desc Base Address Low (1) - RW */ 936#define E1000_TDBAH1 0x03904 /* TX Desc Base Address High (1) - RW */ 937#define E1000_TDLEN1 0x03908 /* TX Desc Length (1) - RW */ 938#define E1000_TDH1 0x03910 /* TX Desc Head (1) - RW */ 939#define E1000_TDT1 0x03918 /* TX Desc Tail (1) - RW */ 940#define E1000_TXDCTL1 0x03928 /* TX Descriptor Control (1) - RW */ 941#define E1000_TARC1 0x03940 /* TX Arbitration Count (1) */ 942#define E1000_CRCERRS 0x04000 /* CRC Error Count - R/clr */ 943#define E1000_ALGNERRC 0x04004 /* Alignment Error Count - R/clr */ 944#define E1000_SYMERRS 0x04008 /* Symbol Error Count - R/clr */ 945#define E1000_RXERRC 0x0400C /* Receive Error Count - R/clr */ 946#define E1000_MPC 0x04010 /* Missed Packet Count - R/clr */ 947#define E1000_SCC 0x04014 /* Single Collision Count - R/clr */ 948#define E1000_ECOL 0x04018 /* Excessive Collision Count - R/clr */ 949#define E1000_MCC 0x0401C /* Multiple Collision Count - R/clr */ 950#define E1000_LATECOL 0x04020 /* Late Collision Count - R/clr */ 951#define E1000_COLC 0x04028 /* Collision Count - R/clr */ 952#define E1000_DC 0x04030 /* Defer Count - R/clr */ 953#define E1000_TNCRS 0x04034 /* TX-No CRS - R/clr */ 954#define E1000_SEC 0x04038 /* Sequence Error Count - R/clr */ 955#define E1000_CEXTERR 0x0403C /* Carrier Extension Error Count - R/clr */ 956#define E1000_RLEC 0x04040 /* Receive Length Error Count - R/clr */ 957#define E1000_XONRXC 0x04048 /* XON RX Count - R/clr */ 958#define E1000_XONTXC 0x0404C /* XON TX Count - R/clr */ 959#define E1000_XOFFRXC 0x04050 /* XOFF RX Count - R/clr */ 960#define E1000_XOFFTXC 0x04054 /* XOFF TX Count - R/clr */ 961#define E1000_FCRUC 0x04058 /* Flow Control RX Unsupported Count- R/clr */ 962#define E1000_PRC64 0x0405C /* Packets RX (64 bytes) - R/clr */ 963#define E1000_PRC127 0x04060 /* Packets RX (65-127 bytes) - R/clr */ 964#define E1000_PRC255 0x04064 /* Packets RX (128-255 bytes) - R/clr */ 965#define E1000_PRC511 0x04068 /* Packets RX (255-511 bytes) - R/clr */ 966#define E1000_PRC1023 0x0406C /* Packets RX (512-1023 bytes) - R/clr */ 967#define E1000_PRC1522 0x04070 /* Packets RX (1024-1522 bytes) - R/clr */ 968#define E1000_GPRC 0x04074 /* Good Packets RX Count - R/clr */ 969#define E1000_BPRC 0x04078 /* Broadcast Packets RX Count - R/clr */ 970#define E1000_MPRC 0x0407C /* Multicast Packets RX Count - R/clr */ 971#define E1000_GPTC 0x04080 /* Good Packets TX Count - R/clr */ 972#define E1000_GORCL 0x04088 /* Good Octets RX Count Low - R/clr */ 973#define E1000_GORCH 0x0408C /* Good Octets RX Count High - R/clr */ 974#define E1000_GOTCL 0x04090 /* Good Octets TX Count Low - R/clr */ 975#define E1000_GOTCH 0x04094 /* Good Octets TX Count High - R/clr */ 976#define E1000_RNBC 0x040A0 /* RX No Buffers Count - R/clr */ 977#define E1000_RUC 0x040A4 /* RX Undersize Count - R/clr */ 978#define E1000_RFC 0x040A8 /* RX Fragment Count - R/clr */ 979#define E1000_ROC 0x040AC /* RX Oversize Count - R/clr */ 980#define E1000_RJC 0x040B0 /* RX Jabber Count - R/clr */ 981#define E1000_MGTPRC 0x040B4 /* Management Packets RX Count - R/clr */ 982#define E1000_MGTPDC 0x040B8 /* Management Packets Dropped Count - R/clr */ 983#define E1000_MGTPTC 0x040BC /* Management Packets TX Count - R/clr */ 984#define E1000_TORL 0x040C0 /* Total Octets RX Low - R/clr */ 985#define E1000_TORH 0x040C4 /* Total Octets RX High - R/clr */ 986#define E1000_TOTL 0x040C8 /* Total Octets TX Low - R/clr */ 987#define E1000_TOTH 0x040CC /* Total Octets TX High - R/clr */ 988#define E1000_TPR 0x040D0 /* Total Packets RX - R/clr */ 989#define E1000_TPT 0x040D4 /* Total Packets TX - R/clr */ 990#define E1000_PTC64 0x040D8 /* Packets TX (64 bytes) - R/clr */ 991#define E1000_PTC127 0x040DC /* Packets TX (65-127 bytes) - R/clr */ 992#define E1000_PTC255 0x040E0 /* Packets TX (128-255 bytes) - R/clr */ 993#define E1000_PTC511 0x040E4 /* Packets TX (256-511 bytes) - R/clr */ 994#define E1000_PTC1023 0x040E8 /* Packets TX (512-1023 bytes) - R/clr */ 995#define E1000_PTC1522 0x040EC /* Packets TX (1024-1522 Bytes) - R/clr */ 996#define E1000_MPTC 0x040F0 /* Multicast Packets TX Count - R/clr */ 997#define E1000_BPTC 0x040F4 /* Broadcast Packets TX Count - R/clr */ 998#define E1000_TSCTC 0x040F8 /* TCP Segmentation Context TX - R/clr */ 999#define E1000_TSCTFC 0x040FC /* TCP Segmentation Context TX Fail - R/clr */ 1000#define E1000_IAC 0x04100 /* Interrupt Assertion Count */ 1001#define E1000_ICRXPTC 0x04104 /* Interrupt Cause Rx Packet Timer Expire Count */ 1002#define E1000_ICRXATC 0x04108 /* Interrupt Cause Rx Absolute Timer Expire Count */ 1003#define E1000_ICTXPTC 0x0410C /* Interrupt Cause Tx Packet Timer Expire Count */ 1004#define E1000_ICTXATC 0x04110 /* Interrupt Cause Tx Absolute Timer Expire Count */ 1005#define E1000_ICTXQEC 0x04118 /* Interrupt Cause Tx Queue Empty Count */ 1006#define E1000_ICTXQMTC 0x0411C /* Interrupt Cause Tx Queue Minimum Threshold Count */ 1007#define E1000_ICRXDMTC 0x04120 /* Interrupt Cause Rx Descriptor Minimum Threshold Count */ 1008#define E1000_ICRXOC 0x04124 /* Interrupt Cause Receiver Overrun Count */ 1009#define E1000_RXCSUM 0x05000 /* RX Checksum Control - RW */ 1010#define E1000_RFCTL 0x05008 /* Receive Filter Control */ 1011#define E1000_MTA 0x05200 /* Multicast Table Array - RW Array */ 1012#define E1000_RA 0x05400 /* Receive Address - RW Array */ 1013#define E1000_VFTA 0x05600 /* VLAN Filter Table Array - RW Array */ 1014#define E1000_WUC 0x05800 /* Wakeup Control - RW */ 1015#define E1000_WUFC 0x05808 /* Wakeup Filter Control - RW */ 1016#define E1000_WUS 0x05810 /* Wakeup Status - RO */ 1017#define E1000_MANC 0x05820 /* Management Control - RW */ 1018#define E1000_IPAV 0x05838 /* IP Address Valid - RW */ 1019#define E1000_IP4AT 0x05840 /* IPv4 Address Table - RW Array */ 1020#define E1000_IP6AT 0x05880 /* IPv6 Address Table - RW Array */ 1021#define E1000_WUPL 0x05900 /* Wakeup Packet Length - RW */ 1022#define E1000_WUPM 0x05A00 /* Wakeup Packet Memory - RO A */ 1023#define E1000_FFLT 0x05F00 /* Flexible Filter Length Table - RW Array */ 1024#define E1000_HOST_IF 0x08800 /* Host Interface */ 1025#define E1000_FFMT 0x09000 /* Flexible Filter Mask Table - RW Array */ 1026#define E1000_FFVT 0x09800 /* Flexible Filter Value Table - RW Array */ 1027 1028#define E1000_KUMCTRLSTA 0x00034 /* MAC-PHY interface - RW */ 1029#define E1000_MDPHYA 0x0003C /* PHY address - RW */ 1030#define E1000_MANC2H 0x05860 /* Management Control To Host - RW */ 1031#define E1000_SW_FW_SYNC 0x05B5C /* Software-Firmware Synchronization - RW */ 1032 1033#define E1000_GCR 0x05B00 /* PCI-Ex Control */ 1034#define E1000_GSCL_1 0x05B10 /* PCI-Ex Statistic Control #1 */ 1035#define E1000_GSCL_2 0x05B14 /* PCI-Ex Statistic Control #2 */ 1036#define E1000_GSCL_3 0x05B18 /* PCI-Ex Statistic Control #3 */ 1037#define E1000_GSCL_4 0x05B1C /* PCI-Ex Statistic Control #4 */ 1038#define E1000_FACTPS 0x05B30 /* Function Active and Power State to MNG */ 1039#define E1000_SWSM 0x05B50 /* SW Semaphore */ 1040#define E1000_FWSM 0x05B54 /* FW Semaphore */ 1041#define E1000_FFLT_DBG 0x05F04 /* Debug Register */ 1042#define E1000_HICR 0x08F00 /* Host Interface Control */ 1043 1044/* RSS registers */ 1045#define E1000_CPUVEC 0x02C10 /* CPU Vector Register - RW */ 1046#define E1000_MRQC 0x05818 /* Multiple Receive Control - RW */ 1047#define E1000_RETA 0x05C00 /* Redirection Table - RW Array */ 1048#define E1000_RSSRK 0x05C80 /* RSS Random Key - RW Array */ 1049#define E1000_RSSIM 0x05864 /* RSS Interrupt Mask */ 1050#define E1000_RSSIR 0x05868 /* RSS Interrupt Request */ 1051/* Register Set (82542) 1052 * 1053 * Some of the 82542 registers are located at different offsets than they are 1054 * in more current versions of the 8254x. Despite the difference in location, 1055 * the registers function in the same manner. 1056 */ 1057#define E1000_82542_CTL_AUX E1000_CTL_AUX 1058#define E1000_82542_CTRL E1000_CTRL 1059#define E1000_82542_CTRL_DUP E1000_CTRL_DUP 1060#define E1000_82542_STATUS E1000_STATUS 1061#define E1000_82542_EECD E1000_EECD 1062#define E1000_82542_EERD E1000_EERD 1063#define E1000_82542_CTRL_EXT E1000_CTRL_EXT 1064#define E1000_82542_FLA E1000_FLA 1065#define E1000_82542_MDIC E1000_MDIC 1066#define E1000_82542_SCTL E1000_SCTL 1067#define E1000_82542_FEXTNVM E1000_FEXTNVM 1068#define E1000_82542_FCAL E1000_FCAL 1069#define E1000_82542_FCAH E1000_FCAH 1070#define E1000_82542_FCT E1000_FCT 1071#define E1000_82542_VET E1000_VET 1072#define E1000_82542_RA 0x00040 1073#define E1000_82542_ICR E1000_ICR 1074#define E1000_82542_ITR E1000_ITR 1075#define E1000_82542_ICS E1000_ICS 1076#define E1000_82542_IMS E1000_IMS 1077#define E1000_82542_IMC E1000_IMC 1078#define E1000_82542_RCTL E1000_RCTL 1079#define E1000_82542_RDTR 0x00108 1080#define E1000_82542_RDFH E1000_RDFH 1081#define E1000_82542_RDFT E1000_RDFT 1082#define E1000_82542_RDFHS E1000_RDFHS 1083#define E1000_82542_RDFTS E1000_RDFTS 1084#define E1000_82542_RDFPC E1000_RDFPC 1085#define E1000_82542_RDBAL 0x00110 1086#define E1000_82542_RDBAH 0x00114 1087#define E1000_82542_RDLEN 0x00118 1088#define E1000_82542_RDH 0x00120 1089#define E1000_82542_RDT 0x00128 1090#define E1000_82542_RDTR0 E1000_82542_RDTR 1091#define E1000_82542_RDBAL0 E1000_82542_RDBAL 1092#define E1000_82542_RDBAH0 E1000_82542_RDBAH 1093#define E1000_82542_RDLEN0 E1000_82542_RDLEN 1094#define E1000_82542_RDH0 E1000_82542_RDH 1095#define E1000_82542_RDT0 E1000_82542_RDT 1096#define E1000_82542_SRRCTL(_n) (0x280C + ((_n) << 8)) /* Split and Replication 1097 * RX Control - RW */ 1098#define E1000_82542_DCA_RXCTRL(_n) (0x02814 + ((_n) << 8)) 1099#define E1000_82542_RDBAH3 0x02B04 /* RX Desc Base High Queue 3 - RW */ 1100#define E1000_82542_RDBAL3 0x02B00 /* RX Desc Low Queue 3 - RW */ 1101#define E1000_82542_RDLEN3 0x02B08 /* RX Desc Length Queue 3 - RW */ 1102#define E1000_82542_RDH3 0x02B10 /* RX Desc Head Queue 3 - RW */ 1103#define E1000_82542_RDT3 0x02B18 /* RX Desc Tail Queue 3 - RW */ 1104#define E1000_82542_RDBAL2 0x02A00 /* RX Desc Base Low Queue 2 - RW */ 1105#define E1000_82542_RDBAH2 0x02A04 /* RX Desc Base High Queue 2 - RW */ 1106#define E1000_82542_RDLEN2 0x02A08 /* RX Desc Length Queue 2 - RW */ 1107#define E1000_82542_RDH2 0x02A10 /* RX Desc Head Queue 2 - RW */ 1108#define E1000_82542_RDT2 0x02A18 /* RX Desc Tail Queue 2 - RW */ 1109#define E1000_82542_RDTR1 0x00130 1110#define E1000_82542_RDBAL1 0x00138 1111#define E1000_82542_RDBAH1 0x0013C 1112#define E1000_82542_RDLEN1 0x00140 1113#define E1000_82542_RDH1 0x00148 1114#define E1000_82542_RDT1 0x00150 1115#define E1000_82542_FCRTH 0x00160 1116#define E1000_82542_FCRTL 0x00168 1117#define E1000_82542_FCTTV E1000_FCTTV 1118#define E1000_82542_TXCW E1000_TXCW 1119#define E1000_82542_RXCW E1000_RXCW 1120#define E1000_82542_MTA 0x00200 1121#define E1000_82542_TCTL E1000_TCTL 1122#define E1000_82542_TCTL_EXT E1000_TCTL_EXT 1123#define E1000_82542_TIPG E1000_TIPG 1124#define E1000_82542_TDBAL 0x00420 1125#define E1000_82542_TDBAH 0x00424 1126#define E1000_82542_TDLEN 0x00428 1127#define E1000_82542_TDH 0x00430 1128#define E1000_82542_TDT 0x00438 1129#define E1000_82542_TIDV 0x00440 1130#define E1000_82542_TBT E1000_TBT 1131#define E1000_82542_AIT E1000_AIT 1132#define E1000_82542_VFTA 0x00600 1133#define E1000_82542_LEDCTL E1000_LEDCTL 1134#define E1000_82542_PBA E1000_PBA 1135#define E1000_82542_PBS E1000_PBS 1136#define E1000_82542_EEMNGCTL E1000_EEMNGCTL 1137#define E1000_82542_EEARBC E1000_EEARBC 1138#define E1000_82542_FLASHT E1000_FLASHT 1139#define E1000_82542_EEWR E1000_EEWR 1140#define E1000_82542_FLSWCTL E1000_FLSWCTL 1141#define E1000_82542_FLSWDATA E1000_FLSWDATA 1142#define E1000_82542_FLSWCNT E1000_FLSWCNT 1143#define E1000_82542_FLOP E1000_FLOP 1144#define E1000_82542_EXTCNF_CTRL E1000_EXTCNF_CTRL 1145#define E1000_82542_EXTCNF_SIZE E1000_EXTCNF_SIZE 1146#define E1000_82542_PHY_CTRL E1000_PHY_CTRL 1147#define E1000_82542_ERT E1000_ERT 1148#define E1000_82542_RXDCTL E1000_RXDCTL 1149#define E1000_82542_RXDCTL1 E1000_RXDCTL1 1150#define E1000_82542_RADV E1000_RADV 1151#define E1000_82542_RSRPD E1000_RSRPD 1152#define E1000_82542_TXDMAC E1000_TXDMAC 1153#define E1000_82542_KABGTXD E1000_KABGTXD 1154#define E1000_82542_TDFHS E1000_TDFHS 1155#define E1000_82542_TDFTS E1000_TDFTS 1156#define E1000_82542_TDFPC E1000_TDFPC 1157#define E1000_82542_TXDCTL E1000_TXDCTL 1158#define E1000_82542_TADV E1000_TADV 1159#define E1000_82542_TSPMT E1000_TSPMT 1160#define E1000_82542_CRCERRS E1000_CRCERRS 1161#define E1000_82542_ALGNERRC E1000_ALGNERRC 1162#define E1000_82542_SYMERRS E1000_SYMERRS 1163#define E1000_82542_RXERRC E1000_RXERRC 1164#define E1000_82542_MPC E1000_MPC 1165#define E1000_82542_SCC E1000_SCC 1166#define E1000_82542_ECOL E1000_ECOL 1167#define E1000_82542_MCC E1000_MCC 1168#define E1000_82542_LATECOL E1000_LATECOL 1169#define E1000_82542_COLC E1000_COLC 1170#define E1000_82542_DC E1000_DC 1171#define E1000_82542_TNCRS E1000_TNCRS 1172#define E1000_82542_SEC E1000_SEC 1173#define E1000_82542_CEXTERR E1000_CEXTERR 1174#define E1000_82542_RLEC E1000_RLEC 1175#define E1000_82542_XONRXC E1000_XONRXC 1176#define E1000_82542_XONTXC E1000_XONTXC 1177#define E1000_82542_XOFFRXC E1000_XOFFRXC 1178#define E1000_82542_XOFFTXC E1000_XOFFTXC 1179#define E1000_82542_FCRUC E1000_FCRUC 1180#define E1000_82542_PRC64 E1000_PRC64 1181#define E1000_82542_PRC127 E1000_PRC127 1182#define E1000_82542_PRC255 E1000_PRC255 1183#define E1000_82542_PRC511 E1000_PRC511 1184#define E1000_82542_PRC1023 E1000_PRC1023 1185#define E1000_82542_PRC1522 E1000_PRC1522 1186#define E1000_82542_GPRC E1000_GPRC 1187#define E1000_82542_BPRC E1000_BPRC 1188#define E1000_82542_MPRC E1000_MPRC 1189#define E1000_82542_GPTC E1000_GPTC 1190#define E1000_82542_GORCL E1000_GORCL 1191#define E1000_82542_GORCH E1000_GORCH 1192#define E1000_82542_GOTCL E1000_GOTCL 1193#define E1000_82542_GOTCH E1000_GOTCH 1194#define E1000_82542_RNBC E1000_RNBC 1195#define E1000_82542_RUC E1000_RUC 1196#define E1000_82542_RFC E1000_RFC 1197#define E1000_82542_ROC E1000_ROC 1198#define E1000_82542_RJC E1000_RJC 1199#define E1000_82542_MGTPRC E1000_MGTPRC 1200#define E1000_82542_MGTPDC E1000_MGTPDC 1201#define E1000_82542_MGTPTC E1000_MGTPTC 1202#define E1000_82542_TORL E1000_TORL 1203#define E1000_82542_TORH E1000_TORH 1204#define E1000_82542_TOTL E1000_TOTL 1205#define E1000_82542_TOTH E1000_TOTH 1206#define E1000_82542_TPR E1000_TPR 1207#define E1000_82542_TPT E1000_TPT 1208#define E1000_82542_PTC64 E1000_PTC64 1209#define E1000_82542_PTC127 E1000_PTC127 1210#define E1000_82542_PTC255 E1000_PTC255 1211#define E1000_82542_PTC511 E1000_PTC511 1212#define E1000_82542_PTC1023 E1000_PTC1023 1213#define E1000_82542_PTC1522 E1000_PTC1522 1214#define E1000_82542_MPTC E1000_MPTC 1215#define E1000_82542_BPTC E1000_BPTC 1216#define E1000_82542_TSCTC E1000_TSCTC 1217#define E1000_82542_TSCTFC E1000_TSCTFC 1218#define E1000_82542_RXCSUM E1000_RXCSUM 1219#define E1000_82542_WUC E1000_WUC 1220#define E1000_82542_WUFC E1000_WUFC 1221#define E1000_82542_WUS E1000_WUS 1222#define E1000_82542_MANC E1000_MANC 1223#define E1000_82542_IPAV E1000_IPAV 1224#define E1000_82542_IP4AT E1000_IP4AT 1225#define E1000_82542_IP6AT E1000_IP6AT 1226#define E1000_82542_WUPL E1000_WUPL 1227#define E1000_82542_WUPM E1000_WUPM 1228#define E1000_82542_FFLT E1000_FFLT 1229#define E1000_82542_TDFH 0x08010 1230#define E1000_82542_TDFT 0x08018 1231#define E1000_82542_FFMT E1000_FFMT 1232#define E1000_82542_FFVT E1000_FFVT 1233#define E1000_82542_HOST_IF E1000_HOST_IF 1234#define E1000_82542_IAM E1000_IAM 1235#define E1000_82542_EEMNGCTL E1000_EEMNGCTL 1236#define E1000_82542_PSRCTL E1000_PSRCTL 1237#define E1000_82542_RAID E1000_RAID 1238#define E1000_82542_TARC0 E1000_TARC0 1239#define E1000_82542_TDBAL1 E1000_TDBAL1 1240#define E1000_82542_TDBAH1 E1000_TDBAH1 1241#define E1000_82542_TDLEN1 E1000_TDLEN1 1242#define E1000_82542_TDH1 E1000_TDH1 1243#define E1000_82542_TDT1 E1000_TDT1 1244#define E1000_82542_TXDCTL1 E1000_TXDCTL1 1245#define E1000_82542_TARC1 E1000_TARC1 1246#define E1000_82542_RFCTL E1000_RFCTL 1247#define E1000_82542_GCR E1000_GCR 1248#define E1000_82542_GSCL_1 E1000_GSCL_1 1249#define E1000_82542_GSCL_2 E1000_GSCL_2 1250#define E1000_82542_GSCL_3 E1000_GSCL_3 1251#define E1000_82542_GSCL_4 E1000_GSCL_4 1252#define E1000_82542_FACTPS E1000_FACTPS 1253#define E1000_82542_SWSM E1000_SWSM 1254#define E1000_82542_FWSM E1000_FWSM 1255#define E1000_82542_FFLT_DBG E1000_FFLT_DBG 1256#define E1000_82542_IAC E1000_IAC 1257#define E1000_82542_ICRXPTC E1000_ICRXPTC 1258#define E1000_82542_ICRXATC E1000_ICRXATC 1259#define E1000_82542_ICTXPTC E1000_ICTXPTC 1260#define E1000_82542_ICTXATC E1000_ICTXATC 1261#define E1000_82542_ICTXQEC E1000_ICTXQEC 1262#define E1000_82542_ICTXQMTC E1000_ICTXQMTC 1263#define E1000_82542_ICRXDMTC E1000_ICRXDMTC 1264#define E1000_82542_ICRXOC E1000_ICRXOC 1265#define E1000_82542_HICR E1000_HICR 1266 1267#define E1000_82542_CPUVEC E1000_CPUVEC 1268#define E1000_82542_MRQC E1000_MRQC 1269#define E1000_82542_RETA E1000_RETA 1270#define E1000_82542_RSSRK E1000_RSSRK 1271#define E1000_82542_RSSIM E1000_RSSIM 1272#define E1000_82542_RSSIR E1000_RSSIR 1273#define E1000_82542_KUMCTRLSTA E1000_KUMCTRLSTA 1274#define E1000_82542_SW_FW_SYNC E1000_SW_FW_SYNC 1275 1276/* Statistics counters collected by the MAC */ 1277struct e1000_hw_stats { 1278 u64 crcerrs; 1279 u64 algnerrc; 1280 u64 symerrs; 1281 u64 rxerrc; 1282 u64 txerrc; 1283 u64 mpc; 1284 u64 scc; 1285 u64 ecol; 1286 u64 mcc; 1287 u64 latecol; 1288 u64 colc; 1289 u64 dc; 1290 u64 tncrs; 1291 u64 sec; 1292 u64 cexterr; 1293 u64 rlec; 1294 u64 xonrxc; 1295 u64 xontxc; 1296 u64 xoffrxc; 1297 u64 xofftxc; 1298 u64 fcruc; 1299 u64 prc64; 1300 u64 prc127; 1301 u64 prc255; 1302 u64 prc511; 1303 u64 prc1023; 1304 u64 prc1522; 1305 u64 gprc; 1306 u64 bprc; 1307 u64 mprc; 1308 u64 gptc; 1309 u64 gorcl; 1310 u64 gorch; 1311 u64 gotcl; 1312 u64 gotch; 1313 u64 rnbc; 1314 u64 ruc; 1315 u64 rfc; 1316 u64 roc; 1317 u64 rlerrc; 1318 u64 rjc; 1319 u64 mgprc; 1320 u64 mgpdc; 1321 u64 mgptc; 1322 u64 torl; 1323 u64 torh; 1324 u64 totl; 1325 u64 toth; 1326 u64 tpr; 1327 u64 tpt; 1328 u64 ptc64; 1329 u64 ptc127; 1330 u64 ptc255; 1331 u64 ptc511; 1332 u64 ptc1023; 1333 u64 ptc1522; 1334 u64 mptc; 1335 u64 bptc; 1336 u64 tsctc; 1337 u64 tsctfc; 1338 u64 iac; 1339 u64 icrxptc; 1340 u64 icrxatc; 1341 u64 ictxptc; 1342 u64 ictxatc; 1343 u64 ictxqec; 1344 u64 ictxqmtc; 1345 u64 icrxdmtc; 1346 u64 icrxoc; 1347}; 1348 1349/* Structure containing variables used by the shared code (e1000_hw.c) */ 1350struct e1000_hw { 1351 u8 __iomem *hw_addr; 1352 u8 __iomem *flash_address; 1353 void __iomem *ce4100_gbe_mdio_base_virt; 1354 e1000_mac_type mac_type; 1355 e1000_phy_type phy_type; 1356 u32 phy_init_script; 1357 e1000_media_type media_type; 1358 void *back; 1359 struct e1000_shadow_ram *eeprom_shadow_ram; 1360 u32 flash_bank_size; 1361 u32 flash_base_addr; 1362 e1000_fc_type fc; 1363 e1000_bus_speed bus_speed; 1364 e1000_bus_width bus_width; 1365 e1000_bus_type bus_type; 1366 struct e1000_eeprom_info eeprom; 1367 e1000_ms_type master_slave; 1368 e1000_ms_type original_master_slave; 1369 e1000_ffe_config ffe_config_state; 1370 u32 asf_firmware_present; 1371 u32 eeprom_semaphore_present; 1372 unsigned long io_base; 1373 u32 phy_id; 1374 u32 phy_revision; 1375 u32 phy_addr; 1376 u32 original_fc; 1377 u32 txcw; 1378 u32 autoneg_failed; 1379 u32 max_frame_size; 1380 u32 min_frame_size; 1381 u32 mc_filter_type; 1382 u32 num_mc_addrs; 1383 u32 collision_delta; 1384 u32 tx_packet_delta; 1385 u32 ledctl_default; 1386 u32 ledctl_mode1; 1387 u32 ledctl_mode2; 1388 bool tx_pkt_filtering; 1389 struct e1000_host_mng_dhcp_cookie mng_cookie; 1390 u16 phy_spd_default; 1391 u16 autoneg_advertised; 1392 u16 pci_cmd_word; 1393 u16 fc_high_water; 1394 u16 fc_low_water; 1395 u16 fc_pause_time; 1396 u16 current_ifs_val; 1397 u16 ifs_min_val; 1398 u16 ifs_max_val; 1399 u16 ifs_step_size; 1400 u16 ifs_ratio; 1401 u16 device_id; 1402 u16 vendor_id; 1403 u16 subsystem_id; 1404 u16 subsystem_vendor_id; 1405 u8 revision_id; 1406 u8 autoneg; 1407 u8 mdix; 1408 u8 forced_speed_duplex; 1409 u8 wait_autoneg_complete; 1410 u8 dma_fairness; 1411 u8 mac_addr[NODE_ADDRESS_SIZE]; 1412 u8 perm_mac_addr[NODE_ADDRESS_SIZE]; 1413 bool disable_polarity_correction; 1414 bool speed_downgraded; 1415 e1000_smart_speed smart_speed; 1416 e1000_dsp_config dsp_config_state; 1417 bool get_link_status; 1418 bool serdes_has_link; 1419 bool tbi_compatibility_en; 1420 bool tbi_compatibility_on; 1421 bool laa_is_present; 1422 bool phy_reset_disable; 1423 bool initialize_hw_bits_disable; 1424 bool fc_send_xon; 1425 bool fc_strict_ieee; 1426 bool report_tx_early; 1427 bool adaptive_ifs; 1428 bool ifs_params_forced; 1429 bool in_ifs_mode; 1430 bool mng_reg_access_disabled; 1431 bool leave_av_bit_off; 1432 bool bad_tx_carr_stats_fd; 1433 bool has_smbus; 1434}; 1435 1436#define E1000_EEPROM_SWDPIN0 0x0001 /* SWDPIN 0 EEPROM Value */ 1437#define E1000_EEPROM_LED_LOGIC 0x0020 /* Led Logic Word */ 1438#define E1000_EEPROM_RW_REG_DATA 16 /* Offset to data in EEPROM read/write registers */ 1439#define E1000_EEPROM_RW_REG_DONE 2 /* Offset to READ/WRITE done bit */ 1440#define E1000_EEPROM_RW_REG_START 1 /* First bit for telling part to start operation */ 1441#define E1000_EEPROM_RW_ADDR_SHIFT 2 /* Shift to the address bits */ 1442#define E1000_EEPROM_POLL_WRITE 1 /* Flag for polling for write complete */ 1443#define E1000_EEPROM_POLL_READ 0 /* Flag for polling for read complete */ 1444/* Register Bit Masks */ 1445/* Device Control */ 1446#define E1000_CTRL_FD 0x00000001 /* Full duplex.0=half; 1=full */ 1447#define E1000_CTRL_BEM 0x00000002 /* Endian Mode.0=little,1=big */ 1448#define E1000_CTRL_PRIOR 0x00000004 /* Priority on PCI. 0=rx,1=fair */ 1449#define E1000_CTRL_GIO_MASTER_DISABLE 0x00000004 /*Blocks new Master requests */ 1450#define E1000_CTRL_LRST 0x00000008 /* Link reset. 0=normal,1=reset */ 1451#define E1000_CTRL_TME 0x00000010 /* Test mode. 0=normal,1=test */ 1452#define E1000_CTRL_SLE 0x00000020 /* Serial Link on 0=dis,1=en */ 1453#define E1000_CTRL_ASDE 0x00000020 /* Auto-speed detect enable */ 1454#define E1000_CTRL_SLU 0x00000040 /* Set link up (Force Link) */ 1455#define E1000_CTRL_ILOS 0x00000080 /* Invert Loss-Of Signal */ 1456#define E1000_CTRL_SPD_SEL 0x00000300 /* Speed Select Mask */ 1457#define E1000_CTRL_SPD_10 0x00000000 /* Force 10Mb */ 1458#define E1000_CTRL_SPD_100 0x00000100 /* Force 100Mb */ 1459#define E1000_CTRL_SPD_1000 0x00000200 /* Force 1Gb */ 1460#define E1000_CTRL_BEM32 0x00000400 /* Big Endian 32 mode */ 1461#define E1000_CTRL_FRCSPD 0x00000800 /* Force Speed */ 1462#define E1000_CTRL_FRCDPX 0x00001000 /* Force Duplex */ 1463#define E1000_CTRL_D_UD_EN 0x00002000 /* Dock/Undock enable */ 1464#define E1000_CTRL_D_UD_POLARITY 0x00004000 /* Defined polarity of Dock/Undock indication in SDP[0] */ 1465#define E1000_CTRL_FORCE_PHY_RESET 0x00008000 /* Reset both PHY ports, through PHYRST_N pin */ 1466#define E1000_CTRL_EXT_LINK_EN 0x00010000 /* enable link status from external LINK_0 and LINK_1 pins */ 1467#define E1000_CTRL_SWDPIN0 0x00040000 /* SWDPIN 0 value */ 1468#define E1000_CTRL_SWDPIN1 0x00080000 /* SWDPIN 1 value */ 1469#define E1000_CTRL_SWDPIN2 0x00100000 /* SWDPIN 2 value */ 1470#define E1000_CTRL_SWDPIN3 0x00200000 /* SWDPIN 3 value */ 1471#define E1000_CTRL_SWDPIO0 0x00400000 /* SWDPIN 0 Input or output */ 1472#define E1000_CTRL_SWDPIO1 0x00800000 /* SWDPIN 1 input or output */ 1473#define E1000_CTRL_SWDPIO2 0x01000000 /* SWDPIN 2 input or output */ 1474#define E1000_CTRL_SWDPIO3 0x02000000 /* SWDPIN 3 input or output */ 1475#define E1000_CTRL_RST 0x04000000 /* Global reset */ 1476#define E1000_CTRL_RFCE 0x08000000 /* Receive Flow Control enable */ 1477#define E1000_CTRL_TFCE 0x10000000 /* Transmit flow control enable */ 1478#define E1000_CTRL_RTE 0x20000000 /* Routing tag enable */ 1479#define E1000_CTRL_VME 0x40000000 /* IEEE VLAN mode enable */ 1480#define E1000_CTRL_PHY_RST 0x80000000 /* PHY Reset */ 1481#define E1000_CTRL_SW2FW_INT 0x02000000 /* Initiate an interrupt to manageability engine */ 1482 1483/* Device Status */ 1484#define E1000_STATUS_FD 0x00000001 /* Full duplex.0=half,1=full */ 1485#define E1000_STATUS_LU 0x00000002 /* Link up.0=no,1=link */ 1486#define E1000_STATUS_FUNC_MASK 0x0000000C /* PCI Function Mask */ 1487#define E1000_STATUS_FUNC_SHIFT 2 1488#define E1000_STATUS_FUNC_0 0x00000000 /* Function 0 */ 1489#define E1000_STATUS_FUNC_1 0x00000004 /* Function 1 */ 1490#define E1000_STATUS_TXOFF 0x00000010 /* transmission paused */ 1491#define E1000_STATUS_TBIMODE 0x00000020 /* TBI mode */ 1492#define E1000_STATUS_SPEED_MASK 0x000000C0 1493#define E1000_STATUS_SPEED_10 0x00000000 /* Speed 10Mb/s */ 1494#define E1000_STATUS_SPEED_100 0x00000040 /* Speed 100Mb/s */ 1495#define E1000_STATUS_SPEED_1000 0x00000080 /* Speed 1000Mb/s */ 1496#define E1000_STATUS_LAN_INIT_DONE 0x00000200 /* Lan Init Completion 1497 by EEPROM/Flash */ 1498#define E1000_STATUS_ASDV 0x00000300 /* Auto speed detect value */ 1499#define E1000_STATUS_DOCK_CI 0x00000800 /* Change in Dock/Undock state. Clear on write '0'. */ 1500#define E1000_STATUS_GIO_MASTER_ENABLE 0x00080000 /* Status of Master requests. */ 1501#define E1000_STATUS_MTXCKOK 0x00000400 /* MTX clock running OK */ 1502#define E1000_STATUS_PCI66 0x00000800 /* In 66Mhz slot */ 1503#define E1000_STATUS_BUS64 0x00001000 /* In 64 bit slot */ 1504#define E1000_STATUS_PCIX_MODE 0x00002000 /* PCI-X mode */ 1505#define E1000_STATUS_PCIX_SPEED 0x0000C000 /* PCI-X bus speed */ 1506#define E1000_STATUS_BMC_SKU_0 0x00100000 /* BMC USB redirect disabled */ 1507#define E1000_STATUS_BMC_SKU_1 0x00200000 /* BMC SRAM disabled */ 1508#define E1000_STATUS_BMC_SKU_2 0x00400000 /* BMC SDRAM disabled */ 1509#define E1000_STATUS_BMC_CRYPTO 0x00800000 /* BMC crypto disabled */ 1510#define E1000_STATUS_BMC_LITE 0x01000000 /* BMC external code execution disabled */ 1511#define E1000_STATUS_RGMII_ENABLE 0x02000000 /* RGMII disabled */ 1512#define E1000_STATUS_FUSE_8 0x04000000 1513#define E1000_STATUS_FUSE_9 0x08000000 1514#define E1000_STATUS_SERDES0_DIS 0x10000000 /* SERDES disabled on port 0 */ 1515#define E1000_STATUS_SERDES1_DIS 0x20000000 /* SERDES disabled on port 1 */ 1516 1517/* Constants used to interpret the masked PCI-X bus speed. */ 1518#define E1000_STATUS_PCIX_SPEED_66 0x00000000 /* PCI-X bus speed 50-66 MHz */ 1519#define E1000_STATUS_PCIX_SPEED_100 0x00004000 /* PCI-X bus speed 66-100 MHz */ 1520#define E1000_STATUS_PCIX_SPEED_133 0x00008000 /* PCI-X bus speed 100-133 MHz */ 1521 1522/* EEPROM/Flash Control */ 1523#define E1000_EECD_SK 0x00000001 /* EEPROM Clock */ 1524#define E1000_EECD_CS 0x00000002 /* EEPROM Chip Select */ 1525#define E1000_EECD_DI 0x00000004 /* EEPROM Data In */ 1526#define E1000_EECD_DO 0x00000008 /* EEPROM Data Out */ 1527#define E1000_EECD_FWE_MASK 0x00000030 1528#define E1000_EECD_FWE_DIS 0x00000010 /* Disable FLASH writes */ 1529#define E1000_EECD_FWE_EN 0x00000020 /* Enable FLASH writes */ 1530#define E1000_EECD_FWE_SHIFT 4 1531#define E1000_EECD_REQ 0x00000040 /* EEPROM Access Request */ 1532#define E1000_EECD_GNT 0x00000080 /* EEPROM Access Grant */ 1533#define E1000_EECD_PRES 0x00000100 /* EEPROM Present */ 1534#define E1000_EECD_SIZE 0x00000200 /* EEPROM Size (0=64 word 1=256 word) */ 1535#define E1000_EECD_ADDR_BITS 0x00000400 /* EEPROM Addressing bits based on type 1536 * (0-small, 1-large) */ 1537#define E1000_EECD_TYPE 0x00002000 /* EEPROM Type (1-SPI, 0-Microwire) */ 1538#ifndef E1000_EEPROM_GRANT_ATTEMPTS 1539#define E1000_EEPROM_GRANT_ATTEMPTS 1000 /* EEPROM # attempts to gain grant */ 1540#endif 1541#define E1000_EECD_AUTO_RD 0x00000200 /* EEPROM Auto Read done */ 1542#define E1000_EECD_SIZE_EX_MASK 0x00007800 /* EEprom Size */ 1543#define E1000_EECD_SIZE_EX_SHIFT 11 1544#define E1000_EECD_NVADDS 0x00018000 /* NVM Address Size */ 1545#define E1000_EECD_SELSHAD 0x00020000 /* Select Shadow RAM */ 1546#define E1000_EECD_INITSRAM 0x00040000 /* Initialize Shadow RAM */ 1547#define E1000_EECD_FLUPD 0x00080000 /* Update FLASH */ 1548#define E1000_EECD_AUPDEN 0x00100000 /* Enable Autonomous FLASH update */ 1549#define E1000_EECD_SHADV 0x00200000 /* Shadow RAM Data Valid */ 1550#define E1000_EECD_SEC1VAL 0x00400000 /* Sector One Valid */ 1551#define E1000_EECD_SECVAL_SHIFT 22 1552#define E1000_STM_OPCODE 0xDB00 1553#define E1000_HICR_FW_RESET 0xC0 1554 1555#define E1000_SHADOW_RAM_WORDS 2048 1556#define E1000_ICH_NVM_SIG_WORD 0x13 1557#define E1000_ICH_NVM_SIG_MASK 0xC0 1558 1559/* EEPROM Read */ 1560#define E1000_EERD_START 0x00000001 /* Start Read */ 1561#define E1000_EERD_DONE 0x00000010 /* Read Done */ 1562#define E1000_EERD_ADDR_SHIFT 8 1563#define E1000_EERD_ADDR_MASK 0x0000FF00 /* Read Address */ 1564#define E1000_EERD_DATA_SHIFT 16 1565#define E1000_EERD_DATA_MASK 0xFFFF0000 /* Read Data */ 1566 1567/* SPI EEPROM Status Register */ 1568#define EEPROM_STATUS_RDY_SPI 0x01 1569#define EEPROM_STATUS_WEN_SPI 0x02 1570#define EEPROM_STATUS_BP0_SPI 0x04 1571#define EEPROM_STATUS_BP1_SPI 0x08 1572#define EEPROM_STATUS_WPEN_SPI 0x80 1573 1574/* Extended Device Control */ 1575#define E1000_CTRL_EXT_GPI0_EN 0x00000001 /* Maps SDP4 to GPI0 */ 1576#define E1000_CTRL_EXT_GPI1_EN 0x00000002 /* Maps SDP5 to GPI1 */ 1577#define E1000_CTRL_EXT_PHYINT_EN E1000_CTRL_EXT_GPI1_EN 1578#define E1000_CTRL_EXT_GPI2_EN 0x00000004 /* Maps SDP6 to GPI2 */ 1579#define E1000_CTRL_EXT_GPI3_EN 0x00000008 /* Maps SDP7 to GPI3 */ 1580#define E1000_CTRL_EXT_SDP4_DATA 0x00000010 /* Value of SW Defineable Pin 4 */ 1581#define E1000_CTRL_EXT_SDP5_DATA 0x00000020 /* Value of SW Defineable Pin 5 */ 1582#define E1000_CTRL_EXT_PHY_INT E1000_CTRL_EXT_SDP5_DATA 1583#define E1000_CTRL_EXT_SDP6_DATA 0x00000040 /* Value of SW Defineable Pin 6 */ 1584#define E1000_CTRL_EXT_SDP7_DATA 0x00000080 /* Value of SW Defineable Pin 7 */ 1585#define E1000_CTRL_EXT_SDP4_DIR 0x00000100 /* Direction of SDP4 0=in 1=out */ 1586#define E1000_CTRL_EXT_SDP5_DIR 0x00000200 /* Direction of SDP5 0=in 1=out */ 1587#define E1000_CTRL_EXT_SDP6_DIR 0x00000400 /* Direction of SDP6 0=in 1=out */ 1588#define E1000_CTRL_EXT_SDP7_DIR 0x00000800 /* Direction of SDP7 0=in 1=out */ 1589#define E1000_CTRL_EXT_ASDCHK 0x00001000 /* Initiate an ASD sequence */ 1590#define E1000_CTRL_EXT_EE_RST 0x00002000 /* Reinitialize from EEPROM */ 1591#define E1000_CTRL_EXT_IPS 0x00004000 /* Invert Power State */ 1592#define E1000_CTRL_EXT_SPD_BYPS 0x00008000 /* Speed Select Bypass */ 1593#define E1000_CTRL_EXT_RO_DIS 0x00020000 /* Relaxed Ordering disable */ 1594#define E1000_CTRL_EXT_LINK_MODE_MASK 0x00C00000 1595#define E1000_CTRL_EXT_LINK_MODE_GMII 0x00000000 1596#define E1000_CTRL_EXT_LINK_MODE_TBI 0x00C00000 1597#define E1000_CTRL_EXT_LINK_MODE_KMRN 0x00000000 1598#define E1000_CTRL_EXT_LINK_MODE_SERDES 0x00C00000 1599#define E1000_CTRL_EXT_LINK_MODE_SGMII 0x00800000 1600#define E1000_CTRL_EXT_WR_WMARK_MASK 0x03000000 1601#define E1000_CTRL_EXT_WR_WMARK_256 0x00000000 1602#define E1000_CTRL_EXT_WR_WMARK_320 0x01000000 1603#define E1000_CTRL_EXT_WR_WMARK_384 0x02000000 1604#define E1000_CTRL_EXT_WR_WMARK_448 0x03000000 1605#define E1000_CTRL_EXT_DRV_LOAD 0x10000000 /* Driver loaded bit for FW */ 1606#define E1000_CTRL_EXT_IAME 0x08000000 /* Interrupt acknowledge Auto-mask */ 1607#define E1000_CTRL_EXT_INT_TIMER_CLR 0x20000000 /* Clear Interrupt timers after IMS clear */ 1608#define E1000_CRTL_EXT_PB_PAREN 0x01000000 /* packet buffer parity error detection enabled */ 1609#define E1000_CTRL_EXT_DF_PAREN 0x02000000 /* descriptor FIFO parity error detection enable */ 1610#define E1000_CTRL_EXT_GHOST_PAREN 0x40000000 1611 1612/* MDI Control */ 1613#define E1000_MDIC_DATA_MASK 0x0000FFFF 1614#define E1000_MDIC_REG_MASK 0x001F0000 1615#define E1000_MDIC_REG_SHIFT 16 1616#define E1000_MDIC_PHY_MASK 0x03E00000 1617#define E1000_MDIC_PHY_SHIFT 21 1618#define E1000_MDIC_OP_WRITE 0x04000000 1619#define E1000_MDIC_OP_READ 0x08000000 1620#define E1000_MDIC_READY 0x10000000 1621#define E1000_MDIC_INT_EN 0x20000000 1622#define E1000_MDIC_ERROR 0x40000000 1623 1624#define INTEL_CE_GBE_MDIC_OP_WRITE 0x04000000 1625#define INTEL_CE_GBE_MDIC_OP_READ 0x00000000 1626#define INTEL_CE_GBE_MDIC_GO 0x80000000 1627#define INTEL_CE_GBE_MDIC_READ_ERROR 0x80000000 1628 1629#define E1000_KUMCTRLSTA_MASK 0x0000FFFF 1630#define E1000_KUMCTRLSTA_OFFSET 0x001F0000 1631#define E1000_KUMCTRLSTA_OFFSET_SHIFT 16 1632#define E1000_KUMCTRLSTA_REN 0x00200000 1633 1634#define E1000_KUMCTRLSTA_OFFSET_FIFO_CTRL 0x00000000 1635#define E1000_KUMCTRLSTA_OFFSET_CTRL 0x00000001 1636#define E1000_KUMCTRLSTA_OFFSET_INB_CTRL 0x00000002 1637#define E1000_KUMCTRLSTA_OFFSET_DIAG 0x00000003 1638#define E1000_KUMCTRLSTA_OFFSET_TIMEOUTS 0x00000004 1639#define E1000_KUMCTRLSTA_OFFSET_INB_PARAM 0x00000009 1640#define E1000_KUMCTRLSTA_OFFSET_HD_CTRL 0x00000010 1641#define E1000_KUMCTRLSTA_OFFSET_M2P_SERDES 0x0000001E 1642#define E1000_KUMCTRLSTA_OFFSET_M2P_MODES 0x0000001F 1643 1644/* FIFO Control */ 1645#define E1000_KUMCTRLSTA_FIFO_CTRL_RX_BYPASS 0x00000008 1646#define E1000_KUMCTRLSTA_FIFO_CTRL_TX_BYPASS 0x00000800 1647 1648/* In-Band Control */ 1649#define E1000_KUMCTRLSTA_INB_CTRL_LINK_STATUS_TX_TIMEOUT_DEFAULT 0x00000500 1650#define E1000_KUMCTRLSTA_INB_CTRL_DIS_PADDING 0x00000010 1651 1652/* Half-Duplex Control */ 1653#define E1000_KUMCTRLSTA_HD_CTRL_10_100_DEFAULT 0x00000004 1654#define E1000_KUMCTRLSTA_HD_CTRL_1000_DEFAULT 0x00000000 1655 1656#define E1000_KUMCTRLSTA_OFFSET_K0S_CTRL 0x0000001E 1657 1658#define E1000_KUMCTRLSTA_DIAG_FELPBK 0x2000 1659#define E1000_KUMCTRLSTA_DIAG_NELPBK 0x1000 1660 1661#define E1000_KUMCTRLSTA_K0S_100_EN 0x2000 1662#define E1000_KUMCTRLSTA_K0S_GBE_EN 0x1000 1663#define E1000_KUMCTRLSTA_K0S_ENTRY_LATENCY_MASK 0x0003 1664 1665#define E1000_KABGTXD_BGSQLBIAS 0x00050000 1666 1667#define E1000_PHY_CTRL_SPD_EN 0x00000001 1668#define E1000_PHY_CTRL_D0A_LPLU 0x00000002 1669#define E1000_PHY_CTRL_NOND0A_LPLU 0x00000004 1670#define E1000_PHY_CTRL_NOND0A_GBE_DISABLE 0x00000008 1671#define E1000_PHY_CTRL_GBE_DISABLE 0x00000040 1672#define E1000_PHY_CTRL_B2B_EN 0x00000080 1673 1674/* LED Control */ 1675#define E1000_LEDCTL_LED0_MODE_MASK 0x0000000F 1676#define E1000_LEDCTL_LED0_MODE_SHIFT 0 1677#define E1000_LEDCTL_LED0_BLINK_RATE 0x0000020 1678#define E1000_LEDCTL_LED0_IVRT 0x00000040 1679#define E1000_LEDCTL_LED0_BLINK 0x00000080 1680#define E1000_LEDCTL_LED1_MODE_MASK 0x00000F00 1681#define E1000_LEDCTL_LED1_MODE_SHIFT 8 1682#define E1000_LEDCTL_LED1_BLINK_RATE 0x0002000 1683#define E1000_LEDCTL_LED1_IVRT 0x00004000 1684#define E1000_LEDCTL_LED1_BLINK 0x00008000 1685#define E1000_LEDCTL_LED2_MODE_MASK 0x000F0000 1686#define E1000_LEDCTL_LED2_MODE_SHIFT 16 1687#define E1000_LEDCTL_LED2_BLINK_RATE 0x00200000 1688#define E1000_LEDCTL_LED2_IVRT 0x00400000 1689#define E1000_LEDCTL_LED2_BLINK 0x00800000 1690#define E1000_LEDCTL_LED3_MODE_MASK 0x0F000000 1691#define E1000_LEDCTL_LED3_MODE_SHIFT 24 1692#define E1000_LEDCTL_LED3_BLINK_RATE 0x20000000 1693#define E1000_LEDCTL_LED3_IVRT 0x40000000 1694#define E1000_LEDCTL_LED3_BLINK 0x80000000 1695 1696#define E1000_LEDCTL_MODE_LINK_10_1000 0x0 1697#define E1000_LEDCTL_MODE_LINK_100_1000 0x1 1698#define E1000_LEDCTL_MODE_LINK_UP 0x2 1699#define E1000_LEDCTL_MODE_ACTIVITY 0x3 1700#define E1000_LEDCTL_MODE_LINK_ACTIVITY 0x4 1701#define E1000_LEDCTL_MODE_LINK_10 0x5 1702#define E1000_LEDCTL_MODE_LINK_100 0x6 1703#define E1000_LEDCTL_MODE_LINK_1000 0x7 1704#define E1000_LEDCTL_MODE_PCIX_MODE 0x8 1705#define E1000_LEDCTL_MODE_FULL_DUPLEX 0x9 1706#define E1000_LEDCTL_MODE_COLLISION 0xA 1707#define E1000_LEDCTL_MODE_BUS_SPEED 0xB 1708#define E1000_LEDCTL_MODE_BUS_SIZE 0xC 1709#define E1000_LEDCTL_MODE_PAUSED 0xD 1710#define E1000_LEDCTL_MODE_LED_ON 0xE 1711#define E1000_LEDCTL_MODE_LED_OFF 0xF 1712 1713/* Receive Address */ 1714#define E1000_RAH_AV 0x80000000 /* Receive descriptor valid */ 1715 1716/* Interrupt Cause Read */ 1717#define E1000_ICR_TXDW 0x00000001 /* Transmit desc written back */ 1718#define E1000_ICR_TXQE 0x00000002 /* Transmit Queue empty */ 1719#define E1000_ICR_LSC 0x00000004 /* Link Status Change */ 1720#define E1000_ICR_RXSEQ 0x00000008 /* rx sequence error */ 1721#define E1000_ICR_RXDMT0 0x00000010 /* rx desc min. threshold (0) */ 1722#define E1000_ICR_RXO 0x00000040 /* rx overrun */ 1723#define E1000_ICR_RXT0 0x00000080 /* rx timer intr (ring 0) */ 1724#define E1000_ICR_MDAC 0x00000200 /* MDIO access complete */ 1725#define E1000_ICR_RXCFG 0x00000400 /* RX /c/ ordered set */ 1726#define E1000_ICR_GPI_EN0 0x00000800 /* GP Int 0 */ 1727#define E1000_ICR_GPI_EN1 0x00001000 /* GP Int 1 */ 1728#define E1000_ICR_GPI_EN2 0x00002000 /* GP Int 2 */ 1729#define E1000_ICR_GPI_EN3 0x00004000 /* GP Int 3 */ 1730#define E1000_ICR_TXD_LOW 0x00008000 1731#define E1000_ICR_SRPD 0x00010000 1732#define E1000_ICR_ACK 0x00020000 /* Receive Ack frame */ 1733#define E1000_ICR_MNG 0x00040000 /* Manageability event */ 1734#define E1000_ICR_DOCK 0x00080000 /* Dock/Undock */ 1735#define E1000_ICR_INT_ASSERTED 0x80000000 /* If this bit asserted, the driver should claim the interrupt */ 1736#define E1000_ICR_RXD_FIFO_PAR0 0x00100000 /* queue 0 Rx descriptor FIFO parity error */ 1737#define E1000_ICR_TXD_FIFO_PAR0 0x00200000 /* queue 0 Tx descriptor FIFO parity error */ 1738#define E1000_ICR_HOST_ARB_PAR 0x00400000 /* host arb read buffer parity error */ 1739#define E1000_ICR_PB_PAR 0x00800000 /* packet buffer parity error */ 1740#define E1000_ICR_RXD_FIFO_PAR1 0x01000000 /* queue 1 Rx descriptor FIFO parity error */ 1741#define E1000_ICR_TXD_FIFO_PAR1 0x02000000 /* queue 1 Tx descriptor FIFO parity error */ 1742#define E1000_ICR_ALL_PARITY 0x03F00000 /* all parity error bits */ 1743#define E1000_ICR_DSW 0x00000020 /* FW changed the status of DISSW bit in the FWSM */ 1744#define E1000_ICR_PHYINT 0x00001000 /* LAN connected device generates an interrupt */ 1745#define E1000_ICR_EPRST 0x00100000 /* ME hardware reset occurs */ 1746 1747/* Interrupt Cause Set */ 1748#define E1000_ICS_TXDW E1000_ICR_TXDW /* Transmit desc written back */ 1749#define E1000_ICS_TXQE E1000_ICR_TXQE /* Transmit Queue empty */ 1750#define E1000_ICS_LSC E1000_ICR_LSC /* Link Status Change */ 1751#define E1000_ICS_RXSEQ E1000_ICR_RXSEQ /* rx sequence error */ 1752#define E1000_ICS_RXDMT0 E1000_ICR_RXDMT0 /* rx desc min. threshold */ 1753#define E1000_ICS_RXO E1000_ICR_RXO /* rx overrun */ 1754#define E1000_ICS_RXT0 E1000_ICR_RXT0 /* rx timer intr */ 1755#define E1000_ICS_MDAC E1000_ICR_MDAC /* MDIO access complete */ 1756#define E1000_ICS_RXCFG E1000_ICR_RXCFG /* RX /c/ ordered set */ 1757#define E1000_ICS_GPI_EN0 E1000_ICR_GPI_EN0 /* GP Int 0 */ 1758#define E1000_ICS_GPI_EN1 E1000_ICR_GPI_EN1 /* GP Int 1 */ 1759#define E1000_ICS_GPI_EN2 E1000_ICR_GPI_EN2 /* GP Int 2 */ 1760#define E1000_ICS_GPI_EN3 E1000_ICR_GPI_EN3 /* GP Int 3 */ 1761#define E1000_ICS_TXD_LOW E1000_ICR_TXD_LOW 1762#define E1000_ICS_SRPD E1000_ICR_SRPD 1763#define E1000_ICS_ACK E1000_ICR_ACK /* Receive Ack frame */ 1764#define E1000_ICS_MNG E1000_ICR_MNG /* Manageability event */ 1765#define E1000_ICS_DOCK E1000_ICR_DOCK /* Dock/Undock */ 1766#define E1000_ICS_RXD_FIFO_PAR0 E1000_ICR_RXD_FIFO_PAR0 /* queue 0 Rx descriptor FIFO parity error */ 1767#define E1000_ICS_TXD_FIFO_PAR0 E1000_ICR_TXD_FIFO_PAR0 /* queue 0 Tx descriptor FIFO parity error */ 1768#define E1000_ICS_HOST_ARB_PAR E1000_ICR_HOST_ARB_PAR /* host arb read buffer parity error */ 1769#define E1000_ICS_PB_PAR E1000_ICR_PB_PAR /* packet buffer parity error */ 1770#define E1000_ICS_RXD_FIFO_PAR1 E1000_ICR_RXD_FIFO_PAR1 /* queue 1 Rx descriptor FIFO parity error */ 1771#define E1000_ICS_TXD_FIFO_PAR1 E1000_ICR_TXD_FIFO_PAR1 /* queue 1 Tx descriptor FIFO parity error */ 1772#define E1000_ICS_DSW E1000_ICR_DSW 1773#define E1000_ICS_PHYINT E1000_ICR_PHYINT 1774#define E1000_ICS_EPRST E1000_ICR_EPRST 1775 1776/* Interrupt Mask Set */ 1777#define E1000_IMS_TXDW E1000_ICR_TXDW /* Transmit desc written back */ 1778#define E1000_IMS_TXQE E1000_ICR_TXQE /* Transmit Queue empty */ 1779#define E1000_IMS_LSC E1000_ICR_LSC /* Link Status Change */ 1780#define E1000_IMS_RXSEQ E1000_ICR_RXSEQ /* rx sequence error */ 1781#define E1000_IMS_RXDMT0 E1000_ICR_RXDMT0 /* rx desc min. threshold */ 1782#define E1000_IMS_RXO E1000_ICR_RXO /* rx overrun */ 1783#define E1000_IMS_RXT0 E1000_ICR_RXT0 /* rx timer intr */ 1784#define E1000_IMS_MDAC E1000_ICR_MDAC /* MDIO access complete */ 1785#define E1000_IMS_RXCFG E1000_ICR_RXCFG /* RX /c/ ordered set */ 1786#define E1000_IMS_GPI_EN0 E1000_ICR_GPI_EN0 /* GP Int 0 */ 1787#define E1000_IMS_GPI_EN1 E1000_ICR_GPI_EN1 /* GP Int 1 */ 1788#define E1000_IMS_GPI_EN2 E1000_ICR_GPI_EN2 /* GP Int 2 */ 1789#define E1000_IMS_GPI_EN3 E1000_ICR_GPI_EN3 /* GP Int 3 */ 1790#define E1000_IMS_TXD_LOW E1000_ICR_TXD_LOW 1791#define E1000_IMS_SRPD E1000_ICR_SRPD 1792#define E1000_IMS_ACK E1000_ICR_ACK /* Receive Ack frame */ 1793#define E1000_IMS_MNG E1000_ICR_MNG /* Manageability event */ 1794#define E1000_IMS_DOCK E1000_ICR_DOCK /* Dock/Undock */ 1795#define E1000_IMS_RXD_FIFO_PAR0 E1000_ICR_RXD_FIFO_PAR0 /* queue 0 Rx descriptor FIFO parity error */ 1796#define E1000_IMS_TXD_FIFO_PAR0 E1000_ICR_TXD_FIFO_PAR0 /* queue 0 Tx descriptor FIFO parity error */ 1797#define E1000_IMS_HOST_ARB_PAR E1000_ICR_HOST_ARB_PAR /* host arb read buffer parity error */ 1798#define E1000_IMS_PB_PAR E1000_ICR_PB_PAR /* packet buffer parity error */ 1799#define E1000_IMS_RXD_FIFO_PAR1 E1000_ICR_RXD_FIFO_PAR1 /* queue 1 Rx descriptor FIFO parity error */ 1800#define E1000_IMS_TXD_FIFO_PAR1 E1000_ICR_TXD_FIFO_PAR1 /* queue 1 Tx descriptor FIFO parity error */ 1801#define E1000_IMS_DSW E1000_ICR_DSW 1802#define E1000_IMS_PHYINT E1000_ICR_PHYINT 1803#define E1000_IMS_EPRST E1000_ICR_EPRST 1804 1805/* Interrupt Mask Clear */ 1806#define E1000_IMC_TXDW E1000_ICR_TXDW /* Transmit desc written back */ 1807#define E1000_IMC_TXQE E1000_ICR_TXQE /* Transmit Queue empty */ 1808#define E1000_IMC_LSC E1000_ICR_LSC /* Link Status Change */ 1809#define E1000_IMC_RXSEQ E1000_ICR_RXSEQ /* rx sequence error */ 1810#define E1000_IMC_RXDMT0 E1000_ICR_RXDMT0 /* rx desc min. threshold */ 1811#define E1000_IMC_RXO E1000_ICR_RXO /* rx overrun */ 1812#define E1000_IMC_RXT0 E1000_ICR_RXT0 /* rx timer intr */ 1813#define E1000_IMC_MDAC E1000_ICR_MDAC /* MDIO access complete */ 1814#define E1000_IMC_RXCFG E1000_ICR_RXCFG /* RX /c/ ordered set */ 1815#define E1000_IMC_GPI_EN0 E1000_ICR_GPI_EN0 /* GP Int 0 */ 1816#define E1000_IMC_GPI_EN1 E1000_ICR_GPI_EN1 /* GP Int 1 */ 1817#define E1000_IMC_GPI_EN2 E1000_ICR_GPI_EN2 /* GP Int 2 */ 1818#define E1000_IMC_GPI_EN3 E1000_ICR_GPI_EN3 /* GP Int 3 */ 1819#define E1000_IMC_TXD_LOW E1000_ICR_TXD_LOW 1820#define E1000_IMC_SRPD E1000_ICR_SRPD 1821#define E1000_IMC_ACK E1000_ICR_ACK /* Receive Ack frame */ 1822#define E1000_IMC_MNG E1000_ICR_MNG /* Manageability event */ 1823#define E1000_IMC_DOCK E1000_ICR_DOCK /* Dock/Undock */ 1824#define E1000_IMC_RXD_FIFO_PAR0 E1000_ICR_RXD_FIFO_PAR0 /* queue 0 Rx descriptor FIFO parity error */ 1825#define E1000_IMC_TXD_FIFO_PAR0 E1000_ICR_TXD_FIFO_PAR0 /* queue 0 Tx descriptor FIFO parity error */ 1826#define E1000_IMC_HOST_ARB_PAR E1000_ICR_HOST_ARB_PAR /* host arb read buffer parity error */ 1827#define E1000_IMC_PB_PAR E1000_ICR_PB_PAR /* packet buffer parity error */ 1828#define E1000_IMC_RXD_FIFO_PAR1 E1000_ICR_RXD_FIFO_PAR1 /* queue 1 Rx descriptor FIFO parity error */ 1829#define E1000_IMC_TXD_FIFO_PAR1 E1000_ICR_TXD_FIFO_PAR1 /* queue 1 Tx descriptor FIFO parity error */ 1830#define E1000_IMC_DSW E1000_ICR_DSW 1831#define E1000_IMC_PHYINT E1000_ICR_PHYINT 1832#define E1000_IMC_EPRST E1000_ICR_EPRST 1833 1834/* Receive Control */ 1835#define E1000_RCTL_RST 0x00000001 /* Software reset */ 1836#define E1000_RCTL_EN 0x00000002 /* enable */ 1837#define E1000_RCTL_SBP 0x00000004 /* store bad packet */ 1838#define E1000_RCTL_UPE 0x00000008 /* unicast promiscuous enable */ 1839#define E1000_RCTL_MPE 0x00000010 /* multicast promiscuous enab */ 1840#define E1000_RCTL_LPE 0x00000020 /* long packet enable */ 1841#define E1000_RCTL_LBM_NO 0x00000000 /* no loopback mode */ 1842#define E1000_RCTL_LBM_MAC 0x00000040 /* MAC loopback mode */ 1843#define E1000_RCTL_LBM_SLP 0x00000080 /* serial link loopback mode */ 1844#define E1000_RCTL_LBM_TCVR 0x000000C0 /* tcvr loopback mode */ 1845#define E1000_RCTL_DTYP_MASK 0x00000C00 /* Descriptor type mask */ 1846#define E1000_RCTL_DTYP_PS 0x00000400 /* Packet Split descriptor */ 1847#define E1000_RCTL_RDMTS_HALF 0x00000000 /* rx desc min threshold size */ 1848#define E1000_RCTL_RDMTS_QUAT 0x00000100 /* rx desc min threshold size */ 1849#define E1000_RCTL_RDMTS_EIGTH 0x00000200 /* rx desc min threshold size */ 1850#define E1000_RCTL_MO_SHIFT 12 /* multicast offset shift */ 1851#define E1000_RCTL_MO_0 0x00000000 /* multicast offset 11:0 */ 1852#define E1000_RCTL_MO_1 0x00001000 /* multicast offset 12:1 */ 1853#define E1000_RCTL_MO_2 0x00002000 /* multicast offset 13:2 */ 1854#define E1000_RCTL_MO_3 0x00003000 /* multicast offset 15:4 */ 1855#define E1000_RCTL_MDR 0x00004000 /* multicast desc ring 0 */ 1856#define E1000_RCTL_BAM 0x00008000 /* broadcast enable */ 1857/* these buffer sizes are valid if E1000_RCTL_BSEX is 0 */ 1858#define E1000_RCTL_SZ_2048 0x00000000 /* rx buffer size 2048 */ 1859#define E1000_RCTL_SZ_1024 0x00010000 /* rx buffer size 1024 */ 1860#define E1000_RCTL_SZ_512 0x00020000 /* rx buffer size 512 */ 1861#define E1000_RCTL_SZ_256 0x00030000 /* rx buffer size 256 */ 1862/* these buffer sizes are valid if E1000_RCTL_BSEX is 1 */ 1863#define E1000_RCTL_SZ_16384 0x00010000 /* rx buffer size 16384 */ 1864#define E1000_RCTL_SZ_8192 0x00020000 /* rx buffer size 8192 */ 1865#define E1000_RCTL_SZ_4096 0x00030000 /* rx buffer size 4096 */ 1866#define E1000_RCTL_VFE 0x00040000 /* vlan filter enable */ 1867#define E1000_RCTL_CFIEN 0x00080000 /* canonical form enable */ 1868#define E1000_RCTL_CFI 0x00100000 /* canonical form indicator */ 1869#define E1000_RCTL_DPF 0x00400000 /* discard pause frames */ 1870#define E1000_RCTL_PMCF 0x00800000 /* pass MAC control frames */ 1871#define E1000_RCTL_BSEX 0x02000000 /* Buffer size extension */ 1872#define E1000_RCTL_SECRC 0x04000000 /* Strip Ethernet CRC */ 1873#define E1000_RCTL_FLXBUF_MASK 0x78000000 /* Flexible buffer size */ 1874#define E1000_RCTL_FLXBUF_SHIFT 27 /* Flexible buffer shift */ 1875 1876/* Use byte values for the following shift parameters 1877 * Usage: 1878 * psrctl |= (((ROUNDUP(value0, 128) >> E1000_PSRCTL_BSIZE0_SHIFT) & 1879 * E1000_PSRCTL_BSIZE0_MASK) | 1880 * ((ROUNDUP(value1, 1024) >> E1000_PSRCTL_BSIZE1_SHIFT) & 1881 * E1000_PSRCTL_BSIZE1_MASK) | 1882 * ((ROUNDUP(value2, 1024) << E1000_PSRCTL_BSIZE2_SHIFT) & 1883 * E1000_PSRCTL_BSIZE2_MASK) | 1884 * ((ROUNDUP(value3, 1024) << E1000_PSRCTL_BSIZE3_SHIFT) |; 1885 * E1000_PSRCTL_BSIZE3_MASK)) 1886 * where value0 = [128..16256], default=256 1887 * value1 = [1024..64512], default=4096 1888 * value2 = [0..64512], default=4096 1889 * value3 = [0..64512], default=0 1890 */ 1891 1892#define E1000_PSRCTL_BSIZE0_MASK 0x0000007F 1893#define E1000_PSRCTL_BSIZE1_MASK 0x00003F00 1894#define E1000_PSRCTL_BSIZE2_MASK 0x003F0000 1895#define E1000_PSRCTL_BSIZE3_MASK 0x3F000000 1896 1897#define E1000_PSRCTL_BSIZE0_SHIFT 7 /* Shift _right_ 7 */ 1898#define E1000_PSRCTL_BSIZE1_SHIFT 2 /* Shift _right_ 2 */ 1899#define E1000_PSRCTL_BSIZE2_SHIFT 6 /* Shift _left_ 6 */ 1900#define E1000_PSRCTL_BSIZE3_SHIFT 14 /* Shift _left_ 14 */ 1901 1902/* SW_W_SYNC definitions */ 1903#define E1000_SWFW_EEP_SM 0x0001 1904#define E1000_SWFW_PHY0_SM 0x0002 1905#define E1000_SWFW_PHY1_SM 0x0004 1906#define E1000_SWFW_MAC_CSR_SM 0x0008 1907 1908/* Receive Descriptor */ 1909#define E1000_RDT_DELAY 0x0000ffff /* Delay timer (1=1024us) */ 1910#define E1000_RDT_FPDB 0x80000000 /* Flush descriptor block */ 1911#define E1000_RDLEN_LEN 0x0007ff80 /* descriptor length */ 1912#define E1000_RDH_RDH 0x0000ffff /* receive descriptor head */ 1913#define E1000_RDT_RDT 0x0000ffff /* receive descriptor tail */ 1914 1915/* Flow Control */ 1916#define E1000_FCRTH_RTH 0x0000FFF8 /* Mask Bits[15:3] for RTH */ 1917#define E1000_FCRTH_XFCE 0x80000000 /* External Flow Control Enable */ 1918#define E1000_FCRTL_RTL 0x0000FFF8 /* Mask Bits[15:3] for RTL */ 1919#define E1000_FCRTL_XONE 0x80000000 /* Enable XON frame transmission */ 1920 1921/* Header split receive */ 1922#define E1000_RFCTL_ISCSI_DIS 0x00000001 1923#define E1000_RFCTL_ISCSI_DWC_MASK 0x0000003E 1924#define E1000_RFCTL_ISCSI_DWC_SHIFT 1 1925#define E1000_RFCTL_NFSW_DIS 0x00000040 1926#define E1000_RFCTL_NFSR_DIS 0x00000080 1927#define E1000_RFCTL_NFS_VER_MASK 0x00000300 1928#define E1000_RFCTL_NFS_VER_SHIFT 8 1929#define E1000_RFCTL_IPV6_DIS 0x00000400 1930#define E1000_RFCTL_IPV6_XSUM_DIS 0x00000800 1931#define E1000_RFCTL_ACK_DIS 0x00001000 1932#define E1000_RFCTL_ACKD_DIS 0x00002000 1933#define E1000_RFCTL_IPFRSP_DIS 0x00004000 1934#define E1000_RFCTL_EXTEN 0x00008000 1935#define E1000_RFCTL_IPV6_EX_DIS 0x00010000 1936#define E1000_RFCTL_NEW_IPV6_EXT_DIS 0x00020000 1937 1938/* Receive Descriptor Control */ 1939#define E1000_RXDCTL_PTHRESH 0x0000003F /* RXDCTL Prefetch Threshold */ 1940#define E1000_RXDCTL_HTHRESH 0x00003F00 /* RXDCTL Host Threshold */ 1941#define E1000_RXDCTL_WTHRESH 0x003F0000 /* RXDCTL Writeback Threshold */ 1942#define E1000_RXDCTL_GRAN 0x01000000 /* RXDCTL Granularity */ 1943 1944/* Transmit Descriptor Control */ 1945#define E1000_TXDCTL_PTHRESH 0x0000003F /* TXDCTL Prefetch Threshold */ 1946#define E1000_TXDCTL_HTHRESH 0x00003F00 /* TXDCTL Host Threshold */ 1947#define E1000_TXDCTL_WTHRESH 0x003F0000 /* TXDCTL Writeback Threshold */ 1948#define E1000_TXDCTL_GRAN 0x01000000 /* TXDCTL Granularity */ 1949#define E1000_TXDCTL_LWTHRESH 0xFE000000 /* TXDCTL Low Threshold */ 1950#define E1000_TXDCTL_FULL_TX_DESC_WB 0x01010000 /* GRAN=1, WTHRESH=1 */ 1951#define E1000_TXDCTL_COUNT_DESC 0x00400000 /* Enable the counting of desc. 1952 still to be processed. */ 1953/* Transmit Configuration Word */ 1954#define E1000_TXCW_FD 0x00000020 /* TXCW full duplex */ 1955#define E1000_TXCW_HD 0x00000040 /* TXCW half duplex */ 1956#define E1000_TXCW_PAUSE 0x00000080 /* TXCW sym pause request */ 1957#define E1000_TXCW_ASM_DIR 0x00000100 /* TXCW astm pause direction */ 1958#define E1000_TXCW_PAUSE_MASK 0x00000180 /* TXCW pause request mask */ 1959#define E1000_TXCW_RF 0x00003000 /* TXCW remote fault */ 1960#define E1000_TXCW_NP 0x00008000 /* TXCW next page */ 1961#define E1000_TXCW_CW 0x0000ffff /* TxConfigWord mask */ 1962#define E1000_TXCW_TXC 0x40000000 /* Transmit Config control */ 1963#define E1000_TXCW_ANE 0x80000000 /* Auto-neg enable */ 1964 1965/* Receive Configuration Word */ 1966#define E1000_RXCW_CW 0x0000ffff /* RxConfigWord mask */ 1967#define E1000_RXCW_NC 0x04000000 /* Receive config no carrier */ 1968#define E1000_RXCW_IV 0x08000000 /* Receive config invalid */ 1969#define E1000_RXCW_CC 0x10000000 /* Receive config change */ 1970#define E1000_RXCW_C 0x20000000 /* Receive config */ 1971#define E1000_RXCW_SYNCH 0x40000000 /* Receive config synch */ 1972#define E1000_RXCW_ANC 0x80000000 /* Auto-neg complete */ 1973 1974/* Transmit Control */ 1975#define E1000_TCTL_RST 0x00000001 /* software reset */ 1976#define E1000_TCTL_EN 0x00000002 /* enable tx */ 1977#define E1000_TCTL_BCE 0x00000004 /* busy check enable */ 1978#define E1000_TCTL_PSP 0x00000008 /* pad short packets */ 1979#define E1000_TCTL_CT 0x00000ff0 /* collision threshold */ 1980#define E1000_TCTL_COLD 0x003ff000 /* collision distance */ 1981#define E1000_TCTL_SWXOFF 0x00400000 /* SW Xoff transmission */ 1982#define E1000_TCTL_PBE 0x00800000 /* Packet Burst Enable */ 1983#define E1000_TCTL_RTLC 0x01000000 /* Re-transmit on late collision */ 1984#define E1000_TCTL_NRTU 0x02000000 /* No Re-transmit on underrun */ 1985#define E1000_TCTL_MULR 0x10000000 /* Multiple request support */ 1986/* Extended Transmit Control */ 1987#define E1000_TCTL_EXT_BST_MASK 0x000003FF /* Backoff Slot Time */ 1988#define E1000_TCTL_EXT_GCEX_MASK 0x000FFC00 /* Gigabit Carry Extend Padding */ 1989 1990/* Receive Checksum Control */ 1991#define E1000_RXCSUM_PCSS_MASK 0x000000FF /* Packet Checksum Start */ 1992#define E1000_RXCSUM_IPOFL 0x00000100 /* IPv4 checksum offload */ 1993#define E1000_RXCSUM_TUOFL 0x00000200 /* TCP / UDP checksum offload */ 1994#define E1000_RXCSUM_IPV6OFL 0x00000400 /* IPv6 checksum offload */ 1995#define E1000_RXCSUM_IPPCSE 0x00001000 /* IP payload checksum enable */ 1996#define E1000_RXCSUM_PCSD 0x00002000 /* packet checksum disabled */ 1997 1998/* Multiple Receive Queue Control */ 1999#define E1000_MRQC_ENABLE_MASK 0x00000003 2000#define E1000_MRQC_ENABLE_RSS_2Q 0x00000001 2001#define E1000_MRQC_ENABLE_RSS_INT 0x00000004 2002#define E1000_MRQC_RSS_FIELD_MASK 0xFFFF0000 2003#define E1000_MRQC_RSS_FIELD_IPV4_TCP 0x00010000 2004#define E1000_MRQC_RSS_FIELD_IPV4 0x00020000 2005#define E1000_MRQC_RSS_FIELD_IPV6_TCP_EX 0x00040000 2006#define E1000_MRQC_RSS_FIELD_IPV6_EX 0x00080000 2007#define E1000_MRQC_RSS_FIELD_IPV6 0x00100000 2008#define E1000_MRQC_RSS_FIELD_IPV6_TCP 0x00200000 2009 2010/* Definitions for power management and wakeup registers */ 2011/* Wake Up Control */ 2012#define E1000_WUC_APME 0x00000001 /* APM Enable */ 2013#define E1000_WUC_PME_EN 0x00000002 /* PME Enable */ 2014#define E1000_WUC_PME_STATUS 0x00000004 /* PME Status */ 2015#define E1000_WUC_APMPME 0x00000008 /* Assert PME on APM Wakeup */ 2016#define E1000_WUC_SPM 0x80000000 /* Enable SPM */ 2017 2018/* Wake Up Filter Control */ 2019#define E1000_WUFC_LNKC 0x00000001 /* Link Status Change Wakeup Enable */ 2020#define E1000_WUFC_MAG 0x00000002 /* Magic Packet Wakeup Enable */ 2021#define E1000_WUFC_EX 0x00000004 /* Directed Exact Wakeup Enable */ 2022#define E1000_WUFC_MC 0x00000008 /* Directed Multicast Wakeup Enable */ 2023#define E1000_WUFC_BC 0x00000010 /* Broadcast Wakeup Enable */ 2024#define E1000_WUFC_ARP 0x00000020 /* ARP Request Packet Wakeup Enable */ 2025#define E1000_WUFC_IPV4 0x00000040 /* Directed IPv4 Packet Wakeup Enable */ 2026#define E1000_WUFC_IPV6 0x00000080 /* Directed IPv6 Packet Wakeup Enable */ 2027#define E1000_WUFC_IGNORE_TCO 0x00008000 /* Ignore WakeOn TCO packets */ 2028#define E1000_WUFC_FLX0 0x00010000 /* Flexible Filter 0 Enable */ 2029#define E1000_WUFC_FLX1 0x00020000 /* Flexible Filter 1 Enable */ 2030#define E1000_WUFC_FLX2 0x00040000 /* Flexible Filter 2 Enable */ 2031#define E1000_WUFC_FLX3 0x00080000 /* Flexible Filter 3 Enable */ 2032#define E1000_WUFC_ALL_FILTERS 0x000F00FF /* Mask for all wakeup filters */ 2033#define E1000_WUFC_FLX_OFFSET 16 /* Offset to the Flexible Filters bits */ 2034#define E1000_WUFC_FLX_FILTERS 0x000F0000 /* Mask for the 4 flexible filters */ 2035 2036/* Wake Up Status */ 2037#define E1000_WUS_LNKC 0x00000001 /* Link Status Changed */ 2038#define E1000_WUS_MAG 0x00000002 /* Magic Packet Received */ 2039#define E1000_WUS_EX 0x00000004 /* Directed Exact Received */ 2040#define E1000_WUS_MC 0x00000008 /* Directed Multicast Received */ 2041#define E1000_WUS_BC 0x00000010 /* Broadcast Received */ 2042#define E1000_WUS_ARP 0x00000020 /* ARP Request Packet Received */ 2043#define E1000_WUS_IPV4 0x00000040 /* Directed IPv4 Packet Wakeup Received */ 2044#define E1000_WUS_IPV6 0x00000080 /* Directed IPv6 Packet Wakeup Received */ 2045#define E1000_WUS_FLX0 0x00010000 /* Flexible Filter 0 Match */ 2046#define E1000_WUS_FLX1 0x00020000 /* Flexible Filter 1 Match */ 2047#define E1000_WUS_FLX2 0x00040000 /* Flexible Filter 2 Match */ 2048#define E1000_WUS_FLX3 0x00080000 /* Flexible Filter 3 Match */ 2049#define E1000_WUS_FLX_FILTERS 0x000F0000 /* Mask for the 4 flexible filters */ 2050 2051/* Management Control */ 2052#define E1000_MANC_SMBUS_EN 0x00000001 /* SMBus Enabled - RO */ 2053#define E1000_MANC_ASF_EN 0x00000002 /* ASF Enabled - RO */ 2054#define E1000_MANC_R_ON_FORCE 0x00000004 /* Reset on Force TCO - RO */ 2055#define E1000_MANC_RMCP_EN 0x00000100 /* Enable RCMP 026Fh Filtering */ 2056#define E1000_MANC_0298_EN 0x00000200 /* Enable RCMP 0298h Filtering */ 2057#define E1000_MANC_IPV4_EN 0x00000400 /* Enable IPv4 */ 2058#define E1000_MANC_IPV6_EN 0x00000800 /* Enable IPv6 */ 2059#define E1000_MANC_SNAP_EN 0x00001000 /* Accept LLC/SNAP */ 2060#define E1000_MANC_ARP_EN 0x00002000 /* Enable ARP Request Filtering */ 2061#define E1000_MANC_NEIGHBOR_EN 0x00004000 /* Enable Neighbor Discovery 2062 * Filtering */ 2063#define E1000_MANC_ARP_RES_EN 0x00008000 /* Enable ARP response Filtering */ 2064#define E1000_MANC_TCO_RESET 0x00010000 /* TCO Reset Occurred */ 2065#define E1000_MANC_RCV_TCO_EN 0x00020000 /* Receive TCO Packets Enabled */ 2066#define E1000_MANC_REPORT_STATUS 0x00040000 /* Status Reporting Enabled */ 2067#define E1000_MANC_RCV_ALL 0x00080000 /* Receive All Enabled */ 2068#define E1000_MANC_BLK_PHY_RST_ON_IDE 0x00040000 /* Block phy resets */ 2069#define E1000_MANC_EN_MAC_ADDR_FILTER 0x00100000 /* Enable MAC address 2070 * filtering */ 2071#define E1000_MANC_EN_MNG2HOST 0x00200000 /* Enable MNG packets to host 2072 * memory */ 2073#define E1000_MANC_EN_IP_ADDR_FILTER 0x00400000 /* Enable IP address 2074 * filtering */ 2075#define E1000_MANC_EN_XSUM_FILTER 0x00800000 /* Enable checksum filtering */ 2076#define E1000_MANC_BR_EN 0x01000000 /* Enable broadcast filtering */ 2077#define E1000_MANC_SMB_REQ 0x01000000 /* SMBus Request */ 2078#define E1000_MANC_SMB_GNT 0x02000000 /* SMBus Grant */ 2079#define E1000_MANC_SMB_CLK_IN 0x04000000 /* SMBus Clock In */ 2080#define E1000_MANC_SMB_DATA_IN 0x08000000 /* SMBus Data In */ 2081#define E1000_MANC_SMB_DATA_OUT 0x10000000 /* SMBus Data Out */ 2082#define E1000_MANC_SMB_CLK_OUT 0x20000000 /* SMBus Clock Out */ 2083 2084#define E1000_MANC_SMB_DATA_OUT_SHIFT 28 /* SMBus Data Out Shift */ 2085#define E1000_MANC_SMB_CLK_OUT_SHIFT 29 /* SMBus Clock Out Shift */ 2086 2087/* SW Semaphore Register */ 2088#define E1000_SWSM_SMBI 0x00000001 /* Driver Semaphore bit */ 2089#define E1000_SWSM_SWESMBI 0x00000002 /* FW Semaphore bit */ 2090#define E1000_SWSM_WMNG 0x00000004 /* Wake MNG Clock */ 2091#define E1000_SWSM_DRV_LOAD 0x00000008 /* Driver Loaded Bit */ 2092 2093/* FW Semaphore Register */ 2094#define E1000_FWSM_MODE_MASK 0x0000000E /* FW mode */ 2095#define E1000_FWSM_MODE_SHIFT 1 2096#define E1000_FWSM_FW_VALID 0x00008000 /* FW established a valid mode */ 2097 2098#define E1000_FWSM_RSPCIPHY 0x00000040 /* Reset PHY on PCI reset */ 2099#define E1000_FWSM_DISSW 0x10000000 /* FW disable SW Write Access */ 2100#define E1000_FWSM_SKUSEL_MASK 0x60000000 /* LAN SKU select */ 2101#define E1000_FWSM_SKUEL_SHIFT 29 2102#define E1000_FWSM_SKUSEL_EMB 0x0 /* Embedded SKU */ 2103#define E1000_FWSM_SKUSEL_CONS 0x1 /* Consumer SKU */ 2104#define E1000_FWSM_SKUSEL_PERF_100 0x2 /* Perf & Corp 10/100 SKU */ 2105#define E1000_FWSM_SKUSEL_PERF_GBE 0x3 /* Perf & Copr GbE SKU */ 2106 2107/* FFLT Debug Register */ 2108#define E1000_FFLT_DBG_INVC 0x00100000 /* Invalid /C/ code handling */ 2109 2110typedef enum { 2111 e1000_mng_mode_none = 0, 2112 e1000_mng_mode_asf, 2113 e1000_mng_mode_pt, 2114 e1000_mng_mode_ipmi, 2115 e1000_mng_mode_host_interface_only 2116} e1000_mng_mode; 2117 2118/* Host Interface Control Register */ 2119#define E1000_HICR_EN 0x00000001 /* Enable Bit - RO */ 2120#define E1000_HICR_C 0x00000002 /* Driver sets this bit when done 2121 * to put command in RAM */ 2122#define E1000_HICR_SV 0x00000004 /* Status Validity */ 2123#define E1000_HICR_FWR 0x00000080 /* FW reset. Set by the Host */ 2124 2125/* Host Interface Command Interface - Address range 0x8800-0x8EFF */ 2126#define E1000_HI_MAX_DATA_LENGTH 252 /* Host Interface data length */ 2127#define E1000_HI_MAX_BLOCK_BYTE_LENGTH 1792 /* Number of bytes in range */ 2128#define E1000_HI_MAX_BLOCK_DWORD_LENGTH 448 /* Number of dwords in range */ 2129#define E1000_HI_COMMAND_TIMEOUT 500 /* Time in ms to process HI command */ 2130 2131struct e1000_host_command_header { 2132 u8 command_id; 2133 u8 command_length; 2134 u8 command_options; /* I/F bits for command, status for return */ 2135 u8 checksum; 2136}; 2137struct e1000_host_command_info { 2138 struct e1000_host_command_header command_header; /* Command Head/Command Result Head has 4 bytes */ 2139 u8 command_data[E1000_HI_MAX_DATA_LENGTH]; /* Command data can length 0..252 */ 2140}; 2141 2142/* Host SMB register #0 */ 2143#define E1000_HSMC0R_CLKIN 0x00000001 /* SMB Clock in */ 2144#define E1000_HSMC0R_DATAIN 0x00000002 /* SMB Data in */ 2145#define E1000_HSMC0R_DATAOUT 0x00000004 /* SMB Data out */ 2146#define E1000_HSMC0R_CLKOUT 0x00000008 /* SMB Clock out */ 2147 2148/* Host SMB register #1 */ 2149#define E1000_HSMC1R_CLKIN E1000_HSMC0R_CLKIN 2150#define E1000_HSMC1R_DATAIN E1000_HSMC0R_DATAIN 2151#define E1000_HSMC1R_DATAOUT E1000_HSMC0R_DATAOUT 2152#define E1000_HSMC1R_CLKOUT E1000_HSMC0R_CLKOUT 2153 2154/* FW Status Register */ 2155#define E1000_FWSTS_FWS_MASK 0x000000FF /* FW Status */ 2156 2157/* Wake Up Packet Length */ 2158#define E1000_WUPL_LENGTH_MASK 0x0FFF /* Only the lower 12 bits are valid */ 2159 2160#define E1000_MDALIGN 4096 2161 2162/* PCI-Ex registers*/ 2163 2164/* PCI-Ex Control Register */ 2165#define E1000_GCR_RXD_NO_SNOOP 0x00000001 2166#define E1000_GCR_RXDSCW_NO_SNOOP 0x00000002 2167#define E1000_GCR_RXDSCR_NO_SNOOP 0x00000004 2168#define E1000_GCR_TXD_NO_SNOOP 0x00000008 2169#define E1000_GCR_TXDSCW_NO_SNOOP 0x00000010 2170#define E1000_GCR_TXDSCR_NO_SNOOP 0x00000020 2171 2172#define PCI_EX_NO_SNOOP_ALL (E1000_GCR_RXD_NO_SNOOP | \ 2173 E1000_GCR_RXDSCW_NO_SNOOP | \ 2174 E1000_GCR_RXDSCR_NO_SNOOP | \ 2175 E1000_GCR_TXD_NO_SNOOP | \ 2176 E1000_GCR_TXDSCW_NO_SNOOP | \ 2177 E1000_GCR_TXDSCR_NO_SNOOP) 2178 2179#define PCI_EX_82566_SNOOP_ALL PCI_EX_NO_SNOOP_ALL 2180 2181#define E1000_GCR_L1_ACT_WITHOUT_L0S_RX 0x08000000 2182/* Function Active and Power State to MNG */ 2183#define E1000_FACTPS_FUNC0_POWER_STATE_MASK 0x00000003 2184#define E1000_FACTPS_LAN0_VALID 0x00000004 2185#define E1000_FACTPS_FUNC0_AUX_EN 0x00000008 2186#define E1000_FACTPS_FUNC1_POWER_STATE_MASK 0x000000C0 2187#define E1000_FACTPS_FUNC1_POWER_STATE_SHIFT 6 2188#define E1000_FACTPS_LAN1_VALID 0x00000100 2189#define E1000_FACTPS_FUNC1_AUX_EN 0x00000200 2190#define E1000_FACTPS_FUNC2_POWER_STATE_MASK 0x00003000 2191#define E1000_FACTPS_FUNC2_POWER_STATE_SHIFT 12 2192#define E1000_FACTPS_IDE_ENABLE 0x00004000 2193#define E1000_FACTPS_FUNC2_AUX_EN 0x00008000 2194#define E1000_FACTPS_FUNC3_POWER_STATE_MASK 0x000C0000 2195#define E1000_FACTPS_FUNC3_POWER_STATE_SHIFT 18 2196#define E1000_FACTPS_SP_ENABLE 0x00100000 2197#define E1000_FACTPS_FUNC3_AUX_EN 0x00200000 2198#define E1000_FACTPS_FUNC4_POWER_STATE_MASK 0x03000000 2199#define E1000_FACTPS_FUNC4_POWER_STATE_SHIFT 24 2200#define E1000_FACTPS_IPMI_ENABLE 0x04000000 2201#define E1000_FACTPS_FUNC4_AUX_EN 0x08000000 2202#define E1000_FACTPS_MNGCG 0x20000000 2203#define E1000_FACTPS_LAN_FUNC_SEL 0x40000000 2204#define E1000_FACTPS_PM_STATE_CHANGED 0x80000000 2205 2206/* PCI-Ex Config Space */ 2207#define PCI_EX_LINK_STATUS 0x12 2208#define PCI_EX_LINK_WIDTH_MASK 0x3F0 2209#define PCI_EX_LINK_WIDTH_SHIFT 4 2210 2211/* EEPROM Commands - Microwire */ 2212#define EEPROM_READ_OPCODE_MICROWIRE 0x6 /* EEPROM read opcode */ 2213#define EEPROM_WRITE_OPCODE_MICROWIRE 0x5 /* EEPROM write opcode */ 2214#define EEPROM_ERASE_OPCODE_MICROWIRE 0x7 /* EEPROM erase opcode */ 2215#define EEPROM_EWEN_OPCODE_MICROWIRE 0x13 /* EEPROM erase/write enable */ 2216#define EEPROM_EWDS_OPCODE_MICROWIRE 0x10 /* EEPROM erase/write disable */ 2217 2218/* EEPROM Commands - SPI */ 2219#define EEPROM_MAX_RETRY_SPI 5000 /* Max wait of 5ms, for RDY signal */ 2220#define EEPROM_READ_OPCODE_SPI 0x03 /* EEPROM read opcode */ 2221#define EEPROM_WRITE_OPCODE_SPI 0x02 /* EEPROM write opcode */ 2222#define EEPROM_A8_OPCODE_SPI 0x08 /* opcode bit-3 = address bit-8 */ 2223#define EEPROM_WREN_OPCODE_SPI 0x06 /* EEPROM set Write Enable latch */ 2224#define EEPROM_WRDI_OPCODE_SPI 0x04 /* EEPROM reset Write Enable latch */ 2225#define EEPROM_RDSR_OPCODE_SPI 0x05 /* EEPROM read Status register */ 2226#define EEPROM_WRSR_OPCODE_SPI 0x01 /* EEPROM write Status register */ 2227#define EEPROM_ERASE4K_OPCODE_SPI 0x20 /* EEPROM ERASE 4KB */ 2228#define EEPROM_ERASE64K_OPCODE_SPI 0xD8 /* EEPROM ERASE 64KB */ 2229#define EEPROM_ERASE256_OPCODE_SPI 0xDB /* EEPROM ERASE 256B */ 2230 2231/* EEPROM Size definitions */ 2232#define EEPROM_WORD_SIZE_SHIFT 6 2233#define EEPROM_SIZE_SHIFT 10 2234#define EEPROM_SIZE_MASK 0x1C00 2235 2236/* EEPROM Word Offsets */ 2237#define EEPROM_COMPAT 0x0003 2238#define EEPROM_ID_LED_SETTINGS 0x0004 2239#define EEPROM_VERSION 0x0005 2240#define EEPROM_SERDES_AMPLITUDE 0x0006 /* For SERDES output amplitude adjustment. */ 2241#define EEPROM_PHY_CLASS_WORD 0x0007 2242#define EEPROM_INIT_CONTROL1_REG 0x000A 2243#define EEPROM_INIT_CONTROL2_REG 0x000F 2244#define EEPROM_SWDEF_PINS_CTRL_PORT_1 0x0010 2245#define EEPROM_INIT_CONTROL3_PORT_B 0x0014 2246#define EEPROM_INIT_3GIO_3 0x001A 2247#define EEPROM_SWDEF_PINS_CTRL_PORT_0 0x0020 2248#define EEPROM_INIT_CONTROL3_PORT_A 0x0024 2249#define EEPROM_CFG 0x0012 2250#define EEPROM_FLASH_VERSION 0x0032 2251#define EEPROM_CHECKSUM_REG 0x003F 2252 2253#define E1000_EEPROM_CFG_DONE 0x00040000 /* MNG config cycle done */ 2254#define E1000_EEPROM_CFG_DONE_PORT_1 0x00080000 /* ...for second port */ 2255 2256/* Word definitions for ID LED Settings */ 2257#define ID_LED_RESERVED_0000 0x0000 2258#define ID_LED_RESERVED_FFFF 0xFFFF 2259#define ID_LED_DEFAULT ((ID_LED_OFF1_ON2 << 12) | \ 2260 (ID_LED_OFF1_OFF2 << 8) | \ 2261 (ID_LED_DEF1_DEF2 << 4) | \ 2262 (ID_LED_DEF1_DEF2)) 2263#define ID_LED_DEF1_DEF2 0x1 2264#define ID_LED_DEF1_ON2 0x2 2265#define ID_LED_DEF1_OFF2 0x3 2266#define ID_LED_ON1_DEF2 0x4 2267#define ID_LED_ON1_ON2 0x5 2268#define ID_LED_ON1_OFF2 0x6 2269#define ID_LED_OFF1_DEF2 0x7 2270#define ID_LED_OFF1_ON2 0x8 2271#define ID_LED_OFF1_OFF2 0x9 2272 2273#define IGP_ACTIVITY_LED_MASK 0xFFFFF0FF 2274#define IGP_ACTIVITY_LED_ENABLE 0x0300 2275#define IGP_LED3_MODE 0x07000000 2276 2277/* Mask bits for SERDES amplitude adjustment in Word 6 of the EEPROM */ 2278#define EEPROM_SERDES_AMPLITUDE_MASK 0x000F 2279 2280/* Mask bit for PHY class in Word 7 of the EEPROM */ 2281#define EEPROM_PHY_CLASS_A 0x8000 2282 2283/* Mask bits for fields in Word 0x0a of the EEPROM */ 2284#define EEPROM_WORD0A_ILOS 0x0010 2285#define EEPROM_WORD0A_SWDPIO 0x01E0 2286#define EEPROM_WORD0A_LRST 0x0200 2287#define EEPROM_WORD0A_FD 0x0400 2288#define EEPROM_WORD0A_66MHZ 0x0800 2289 2290/* Mask bits for fields in Word 0x0f of the EEPROM */ 2291#define EEPROM_WORD0F_PAUSE_MASK 0x3000 2292#define EEPROM_WORD0F_PAUSE 0x1000 2293#define EEPROM_WORD0F_ASM_DIR 0x2000 2294#define EEPROM_WORD0F_ANE 0x0800 2295#define EEPROM_WORD0F_SWPDIO_EXT 0x00F0 2296#define EEPROM_WORD0F_LPLU 0x0001 2297 2298/* Mask bits for fields in Word 0x10/0x20 of the EEPROM */ 2299#define EEPROM_WORD1020_GIGA_DISABLE 0x0010 2300#define EEPROM_WORD1020_GIGA_DISABLE_NON_D0A 0x0008 2301 2302/* Mask bits for fields in Word 0x1a of the EEPROM */ 2303#define EEPROM_WORD1A_ASPM_MASK 0x000C 2304 2305/* For checksumming, the sum of all words in the EEPROM should equal 0xBABA. */ 2306#define EEPROM_SUM 0xBABA 2307 2308/* EEPROM Map defines (WORD OFFSETS)*/ 2309#define EEPROM_NODE_ADDRESS_BYTE_0 0 2310#define EEPROM_PBA_BYTE_1 8 2311 2312#define EEPROM_RESERVED_WORD 0xFFFF 2313 2314/* EEPROM Map Sizes (Byte Counts) */ 2315#define PBA_SIZE 4 2316 2317/* Collision related configuration parameters */ 2318#define E1000_COLLISION_THRESHOLD 15 2319#define E1000_CT_SHIFT 4 2320/* Collision distance is a 0-based value that applies to 2321 * half-duplex-capable hardware only. */ 2322#define E1000_COLLISION_DISTANCE 63 2323#define E1000_COLLISION_DISTANCE_82542 64 2324#define E1000_FDX_COLLISION_DISTANCE E1000_COLLISION_DISTANCE 2325#define E1000_HDX_COLLISION_DISTANCE E1000_COLLISION_DISTANCE 2326#define E1000_COLD_SHIFT 12 2327 2328/* Number of Transmit and Receive Descriptors must be a multiple of 8 */ 2329#define REQ_TX_DESCRIPTOR_MULTIPLE 8 2330#define REQ_RX_DESCRIPTOR_MULTIPLE 8 2331 2332/* Default values for the transmit IPG register */ 2333#define DEFAULT_82542_TIPG_IPGT 10 2334#define DEFAULT_82543_TIPG_IPGT_FIBER 9 2335#define DEFAULT_82543_TIPG_IPGT_COPPER 8 2336 2337#define E1000_TIPG_IPGT_MASK 0x000003FF 2338#define E1000_TIPG_IPGR1_MASK 0x000FFC00 2339#define E1000_TIPG_IPGR2_MASK 0x3FF00000 2340 2341#define DEFAULT_82542_TIPG_IPGR1 2 2342#define DEFAULT_82543_TIPG_IPGR1 8 2343#define E1000_TIPG_IPGR1_SHIFT 10 2344 2345#define DEFAULT_82542_TIPG_IPGR2 10 2346#define DEFAULT_82543_TIPG_IPGR2 6 2347#define E1000_TIPG_IPGR2_SHIFT 20 2348 2349#define E1000_TXDMAC_DPP 0x00000001 2350 2351/* Adaptive IFS defines */ 2352#define TX_THRESHOLD_START 8 2353#define TX_THRESHOLD_INCREMENT 10 2354#define TX_THRESHOLD_DECREMENT 1 2355#define TX_THRESHOLD_STOP 190 2356#define TX_THRESHOLD_DISABLE 0 2357#define TX_THRESHOLD_TIMER_MS 10000 2358#define MIN_NUM_XMITS 1000 2359#define IFS_MAX 80 2360#define IFS_STEP 10 2361#define IFS_MIN 40 2362#define IFS_RATIO 4 2363 2364/* Extended Configuration Control and Size */ 2365#define E1000_EXTCNF_CTRL_PCIE_WRITE_ENABLE 0x00000001 2366#define E1000_EXTCNF_CTRL_PHY_WRITE_ENABLE 0x00000002 2367#define E1000_EXTCNF_CTRL_D_UD_ENABLE 0x00000004 2368#define E1000_EXTCNF_CTRL_D_UD_LATENCY 0x00000008 2369#define E1000_EXTCNF_CTRL_D_UD_OWNER 0x00000010 2370#define E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP 0x00000020 2371#define E1000_EXTCNF_CTRL_MDIO_HW_OWNERSHIP 0x00000040 2372#define E1000_EXTCNF_CTRL_EXT_CNF_POINTER 0x0FFF0000 2373 2374#define E1000_EXTCNF_SIZE_EXT_PHY_LENGTH 0x000000FF 2375#define E1000_EXTCNF_SIZE_EXT_DOCK_LENGTH 0x0000FF00 2376#define E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH 0x00FF0000 2377#define E1000_EXTCNF_CTRL_LCD_WRITE_ENABLE 0x00000001 2378#define E1000_EXTCNF_CTRL_SWFLAG 0x00000020 2379 2380/* PBA constants */ 2381#define E1000_PBA_8K 0x0008 /* 8KB, default Rx allocation */ 2382#define E1000_PBA_12K 0x000C /* 12KB, default Rx allocation */ 2383#define E1000_PBA_16K 0x0010 /* 16KB, default TX allocation */ 2384#define E1000_PBA_20K 0x0014 2385#define E1000_PBA_22K 0x0016 2386#define E1000_PBA_24K 0x0018 2387#define E1000_PBA_30K 0x001E 2388#define E1000_PBA_32K 0x0020 2389#define E1000_PBA_34K 0x0022 2390#define E1000_PBA_38K 0x0026 2391#define E1000_PBA_40K 0x0028 2392#define E1000_PBA_48K 0x0030 /* 48KB, default RX allocation */ 2393 2394#define E1000_PBS_16K E1000_PBA_16K 2395 2396/* Flow Control Constants */ 2397#define FLOW_CONTROL_ADDRESS_LOW 0x00C28001 2398#define FLOW_CONTROL_ADDRESS_HIGH 0x00000100 2399#define FLOW_CONTROL_TYPE 0x8808 2400 2401/* The historical defaults for the flow control values are given below. */ 2402#define FC_DEFAULT_HI_THRESH (0x8000) /* 32KB */ 2403#define FC_DEFAULT_LO_THRESH (0x4000) /* 16KB */ 2404#define FC_DEFAULT_TX_TIMER (0x100) /* ~130 us */ 2405 2406/* PCIX Config space */ 2407#define PCIX_COMMAND_REGISTER 0xE6 2408#define PCIX_STATUS_REGISTER_LO 0xE8 2409#define PCIX_STATUS_REGISTER_HI 0xEA 2410 2411#define PCIX_COMMAND_MMRBC_MASK 0x000C 2412#define PCIX_COMMAND_MMRBC_SHIFT 0x2 2413#define PCIX_STATUS_HI_MMRBC_MASK 0x0060 2414#define PCIX_STATUS_HI_MMRBC_SHIFT 0x5 2415#define PCIX_STATUS_HI_MMRBC_4K 0x3 2416#define PCIX_STATUS_HI_MMRBC_2K 0x2 2417 2418/* Number of bits required to shift right the "pause" bits from the 2419 * EEPROM (bits 13:12) to the "pause" (bits 8:7) field in the TXCW register. 2420 */ 2421#define PAUSE_SHIFT 5 2422 2423/* Number of bits required to shift left the "SWDPIO" bits from the 2424 * EEPROM (bits 8:5) to the "SWDPIO" (bits 25:22) field in the CTRL register. 2425 */ 2426#define SWDPIO_SHIFT 17 2427 2428/* Number of bits required to shift left the "SWDPIO_EXT" bits from the 2429 * EEPROM word F (bits 7:4) to the bits 11:8 of The Extended CTRL register. 2430 */ 2431#define SWDPIO__EXT_SHIFT 4 2432 2433/* Number of bits required to shift left the "ILOS" bit from the EEPROM 2434 * (bit 4) to the "ILOS" (bit 7) field in the CTRL register. 2435 */ 2436#define ILOS_SHIFT 3 2437 2438#define RECEIVE_BUFFER_ALIGN_SIZE (256) 2439 2440/* Number of milliseconds we wait for auto-negotiation to complete */ 2441#define LINK_UP_TIMEOUT 500 2442 2443/* Number of milliseconds we wait for Eeprom auto read bit done after MAC reset */ 2444#define AUTO_READ_DONE_TIMEOUT 10 2445/* Number of milliseconds we wait for PHY configuration done after MAC reset */ 2446#define PHY_CFG_TIMEOUT 100 2447 2448#define E1000_TX_BUFFER_SIZE ((u32)1514) 2449 2450/* The carrier extension symbol, as received by the NIC. */ 2451#define CARRIER_EXTENSION 0x0F 2452 2453/* TBI_ACCEPT macro definition: 2454 * 2455 * This macro requires: 2456 * adapter = a pointer to struct e1000_hw 2457 * status = the 8 bit status field of the RX descriptor with EOP set 2458 * error = the 8 bit error field of the RX descriptor with EOP set 2459 * length = the sum of all the length fields of the RX descriptors that 2460 * make up the current frame 2461 * last_byte = the last byte of the frame DMAed by the hardware 2462 * max_frame_length = the maximum frame length we want to accept. 2463 * min_frame_length = the minimum frame length we want to accept. 2464 * 2465 * This macro is a conditional that should be used in the interrupt 2466 * handler's Rx processing routine when RxErrors have been detected. 2467 * 2468 * Typical use: 2469 * ... 2470 * if (TBI_ACCEPT) { 2471 * accept_frame = true; 2472 * e1000_tbi_adjust_stats(adapter, MacAddress); 2473 * frame_length--; 2474 * } else { 2475 * accept_frame = false; 2476 * } 2477 * ... 2478 */ 2479 2480#define TBI_ACCEPT(adapter, status, errors, length, last_byte) \ 2481 ((adapter)->tbi_compatibility_on && \ 2482 (((errors) & E1000_RXD_ERR_FRAME_ERR_MASK) == E1000_RXD_ERR_CE) && \ 2483 ((last_byte) == CARRIER_EXTENSION) && \ 2484 (((status) & E1000_RXD_STAT_VP) ? \ 2485 (((length) > ((adapter)->min_frame_size - VLAN_TAG_SIZE)) && \ 2486 ((length) <= ((adapter)->max_frame_size + 1))) : \ 2487 (((length) > (adapter)->min_frame_size) && \ 2488 ((length) <= ((adapter)->max_frame_size + VLAN_TAG_SIZE + 1))))) 2489 2490/* Structures, enums, and macros for the PHY */ 2491 2492/* Bit definitions for the Management Data IO (MDIO) and Management Data 2493 * Clock (MDC) pins in the Device Control Register. 2494 */ 2495#define E1000_CTRL_PHY_RESET_DIR E1000_CTRL_SWDPIO0 2496#define E1000_CTRL_PHY_RESET E1000_CTRL_SWDPIN0 2497#define E1000_CTRL_MDIO_DIR E1000_CTRL_SWDPIO2 2498#define E1000_CTRL_MDIO E1000_CTRL_SWDPIN2 2499#define E1000_CTRL_MDC_DIR E1000_CTRL_SWDPIO3 2500#define E1000_CTRL_MDC E1000_CTRL_SWDPIN3 2501#define E1000_CTRL_PHY_RESET_DIR4 E1000_CTRL_EXT_SDP4_DIR 2502#define E1000_CTRL_PHY_RESET4 E1000_CTRL_EXT_SDP4_DATA 2503 2504/* PHY 1000 MII Register/Bit Definitions */ 2505/* PHY Registers defined by IEEE */ 2506#define PHY_CTRL 0x00 /* Control Register */ 2507#define PHY_STATUS 0x01 /* Status Register */ 2508#define PHY_ID1 0x02 /* Phy Id Reg (word 1) */ 2509#define PHY_ID2 0x03 /* Phy Id Reg (word 2) */ 2510#define PHY_AUTONEG_ADV 0x04 /* Autoneg Advertisement */ 2511#define PHY_LP_ABILITY 0x05 /* Link Partner Ability (Base Page) */ 2512#define PHY_AUTONEG_EXP 0x06 /* Autoneg Expansion Reg */ 2513#define PHY_NEXT_PAGE_TX 0x07 /* Next Page TX */ 2514#define PHY_LP_NEXT_PAGE 0x08 /* Link Partner Next Page */ 2515#define PHY_1000T_CTRL 0x09 /* 1000Base-T Control Reg */ 2516#define PHY_1000T_STATUS 0x0A /* 1000Base-T Status Reg */ 2517#define PHY_EXT_STATUS 0x0F /* Extended Status Reg */ 2518 2519#define MAX_PHY_REG_ADDRESS 0x1F /* 5 bit address bus (0-0x1F) */ 2520#define MAX_PHY_MULTI_PAGE_REG 0xF /* Registers equal on all pages */ 2521 2522/* M88E1000 Specific Registers */ 2523#define M88E1000_PHY_SPEC_CTRL 0x10 /* PHY Specific Control Register */ 2524#define M88E1000_PHY_SPEC_STATUS 0x11 /* PHY Specific Status Register */ 2525#define M88E1000_INT_ENABLE 0x12 /* Interrupt Enable Register */ 2526#define M88E1000_INT_STATUS 0x13 /* Interrupt Status Register */ 2527#define M88E1000_EXT_PHY_SPEC_CTRL 0x14 /* Extended PHY Specific Control */ 2528#define M88E1000_RX_ERR_CNTR 0x15 /* Receive Error Counter */ 2529 2530#define M88E1000_PHY_EXT_CTRL 0x1A /* PHY extend control register */ 2531#define M88E1000_PHY_PAGE_SELECT 0x1D /* Reg 29 for page number setting */ 2532#define M88E1000_PHY_GEN_CONTROL 0x1E /* Its meaning depends on reg 29 */ 2533#define M88E1000_PHY_VCO_REG_BIT8 0x100 /* Bits 8 & 11 are adjusted for */ 2534#define M88E1000_PHY_VCO_REG_BIT11 0x800 /* improved BER performance */ 2535 2536#define IGP01E1000_IEEE_REGS_PAGE 0x0000 2537#define IGP01E1000_IEEE_RESTART_AUTONEG 0x3300 2538#define IGP01E1000_IEEE_FORCE_GIGA 0x0140 2539 2540/* IGP01E1000 Specific Registers */ 2541#define IGP01E1000_PHY_PORT_CONFIG 0x10 /* PHY Specific Port Config Register */ 2542#define IGP01E1000_PHY_PORT_STATUS 0x11 /* PHY Specific Status Register */ 2543#define IGP01E1000_PHY_PORT_CTRL 0x12 /* PHY Specific Control Register */ 2544#define IGP01E1000_PHY_LINK_HEALTH 0x13 /* PHY Link Health Register */ 2545#define IGP01E1000_GMII_FIFO 0x14 /* GMII FIFO Register */ 2546#define IGP01E1000_PHY_CHANNEL_QUALITY 0x15 /* PHY Channel Quality Register */ 2547#define IGP02E1000_PHY_POWER_MGMT 0x19 2548#define IGP01E1000_PHY_PAGE_SELECT 0x1F /* PHY Page Select Core Register */ 2549 2550/* IGP01E1000 AGC Registers - stores the cable length values*/ 2551#define IGP01E1000_PHY_AGC_A 0x1172 2552#define IGP01E1000_PHY_AGC_B 0x1272 2553#define IGP01E1000_PHY_AGC_C 0x1472 2554#define IGP01E1000_PHY_AGC_D 0x1872 2555 2556/* IGP02E1000 AGC Registers for cable length values */ 2557#define IGP02E1000_PHY_AGC_A 0x11B1 2558#define IGP02E1000_PHY_AGC_B 0x12B1 2559#define IGP02E1000_PHY_AGC_C 0x14B1 2560#define IGP02E1000_PHY_AGC_D 0x18B1 2561 2562/* IGP01E1000 DSP Reset Register */ 2563#define IGP01E1000_PHY_DSP_RESET 0x1F33 2564#define IGP01E1000_PHY_DSP_SET 0x1F71 2565#define IGP01E1000_PHY_DSP_FFE 0x1F35 2566 2567#define IGP01E1000_PHY_CHANNEL_NUM 4 2568#define IGP02E1000_PHY_CHANNEL_NUM 4 2569 2570#define IGP01E1000_PHY_AGC_PARAM_A 0x1171 2571#define IGP01E1000_PHY_AGC_PARAM_B 0x1271 2572#define IGP01E1000_PHY_AGC_PARAM_C 0x1471 2573#define IGP01E1000_PHY_AGC_PARAM_D 0x1871 2574 2575#define IGP01E1000_PHY_EDAC_MU_INDEX 0xC000 2576#define IGP01E1000_PHY_EDAC_SIGN_EXT_9_BITS 0x8000 2577 2578#define IGP01E1000_PHY_ANALOG_TX_STATE 0x2890 2579#define IGP01E1000_PHY_ANALOG_CLASS_A 0x2000 2580#define IGP01E1000_PHY_FORCE_ANALOG_ENABLE 0x0004 2581#define IGP01E1000_PHY_DSP_FFE_CM_CP 0x0069 2582 2583#define IGP01E1000_PHY_DSP_FFE_DEFAULT 0x002A 2584/* IGP01E1000 PCS Initialization register - stores the polarity status when 2585 * speed = 1000 Mbps. */ 2586#define IGP01E1000_PHY_PCS_INIT_REG 0x00B4 2587#define IGP01E1000_PHY_PCS_CTRL_REG 0x00B5 2588 2589#define IGP01E1000_ANALOG_REGS_PAGE 0x20C0 2590 2591/* PHY Control Register */ 2592#define MII_CR_SPEED_SELECT_MSB 0x0040 /* bits 6,13: 10=1000, 01=100, 00=10 */ 2593#define MII_CR_COLL_TEST_ENABLE 0x0080 /* Collision test enable */ 2594#define MII_CR_FULL_DUPLEX 0x0100 /* FDX =1, half duplex =0 */ 2595#define MII_CR_RESTART_AUTO_NEG 0x0200 /* Restart auto negotiation */ 2596#define MII_CR_ISOLATE 0x0400 /* Isolate PHY from MII */ 2597#define MII_CR_POWER_DOWN 0x0800 /* Power down */ 2598#define MII_CR_AUTO_NEG_EN 0x1000 /* Auto Neg Enable */ 2599#define MII_CR_SPEED_SELECT_LSB 0x2000 /* bits 6,13: 10=1000, 01=100, 00=10 */ 2600#define MII_CR_LOOPBACK 0x4000 /* 0 = normal, 1 = loopback */ 2601#define MII_CR_RESET 0x8000 /* 0 = normal, 1 = PHY reset */ 2602 2603/* PHY Status Register */ 2604#define MII_SR_EXTENDED_CAPS 0x0001 /* Extended register capabilities */ 2605#define MII_SR_JABBER_DETECT 0x0002 /* Jabber Detected */ 2606#define MII_SR_LINK_STATUS 0x0004 /* Link Status 1 = link */ 2607#define MII_SR_AUTONEG_CAPS 0x0008 /* Auto Neg Capable */ 2608#define MII_SR_REMOTE_FAULT 0x0010 /* Remote Fault Detect */ 2609#define MII_SR_AUTONEG_COMPLETE 0x0020 /* Auto Neg Complete */ 2610#define MII_SR_PREAMBLE_SUPPRESS 0x0040 /* Preamble may be suppressed */ 2611#define MII_SR_EXTENDED_STATUS 0x0100 /* Ext. status info in Reg 0x0F */ 2612#define MII_SR_100T2_HD_CAPS 0x0200 /* 100T2 Half Duplex Capable */ 2613#define MII_SR_100T2_FD_CAPS 0x0400 /* 100T2 Full Duplex Capable */ 2614#define MII_SR_10T_HD_CAPS 0x0800 /* 10T Half Duplex Capable */ 2615#define MII_SR_10T_FD_CAPS 0x1000 /* 10T Full Duplex Capable */ 2616#define MII_SR_100X_HD_CAPS 0x2000 /* 100X Half Duplex Capable */ 2617#define MII_SR_100X_FD_CAPS 0x4000 /* 100X Full Duplex Capable */ 2618#define MII_SR_100T4_CAPS 0x8000 /* 100T4 Capable */ 2619 2620/* Autoneg Advertisement Register */ 2621#define NWAY_AR_SELECTOR_FIELD 0x0001 /* indicates IEEE 802.3 CSMA/CD */ 2622#define NWAY_AR_10T_HD_CAPS 0x0020 /* 10T Half Duplex Capable */ 2623#define NWAY_AR_10T_FD_CAPS 0x0040 /* 10T Full Duplex Capable */ 2624#define NWAY_AR_100TX_HD_CAPS 0x0080 /* 100TX Half Duplex Capable */ 2625#define NWAY_AR_100TX_FD_CAPS 0x0100 /* 100TX Full Duplex Capable */ 2626#define NWAY_AR_100T4_CAPS 0x0200 /* 100T4 Capable */ 2627#define NWAY_AR_PAUSE 0x0400 /* Pause operation desired */ 2628#define NWAY_AR_ASM_DIR 0x0800 /* Asymmetric Pause Direction bit */ 2629#define NWAY_AR_REMOTE_FAULT 0x2000 /* Remote Fault detected */ 2630#define NWAY_AR_NEXT_PAGE 0x8000 /* Next Page ability supported */ 2631 2632/* Link Partner Ability Register (Base Page) */ 2633#define NWAY_LPAR_SELECTOR_FIELD 0x0000 /* LP protocol selector field */ 2634#define NWAY_LPAR_10T_HD_CAPS 0x0020 /* LP is 10T Half Duplex Capable */ 2635#define NWAY_LPAR_10T_FD_CAPS 0x0040 /* LP is 10T Full Duplex Capable */ 2636#define NWAY_LPAR_100TX_HD_CAPS 0x0080 /* LP is 100TX Half Duplex Capable */ 2637#define NWAY_LPAR_100TX_FD_CAPS 0x0100 /* LP is 100TX Full Duplex Capable */ 2638#define NWAY_LPAR_100T4_CAPS 0x0200 /* LP is 100T4 Capable */ 2639#define NWAY_LPAR_PAUSE 0x0400 /* LP Pause operation desired */ 2640#define NWAY_LPAR_ASM_DIR 0x0800 /* LP Asymmetric Pause Direction bit */ 2641#define NWAY_LPAR_REMOTE_FAULT 0x2000 /* LP has detected Remote Fault */ 2642#define NWAY_LPAR_ACKNOWLEDGE 0x4000 /* LP has rx'd link code word */ 2643#define NWAY_LPAR_NEXT_PAGE 0x8000 /* Next Page ability supported */ 2644 2645/* Autoneg Expansion Register */ 2646#define NWAY_ER_LP_NWAY_CAPS 0x0001 /* LP has Auto Neg Capability */ 2647#define NWAY_ER_PAGE_RXD 0x0002 /* LP is 10T Half Duplex Capable */ 2648#define NWAY_ER_NEXT_PAGE_CAPS 0x0004 /* LP is 10T Full Duplex Capable */ 2649#define NWAY_ER_LP_NEXT_PAGE_CAPS 0x0008 /* LP is 100TX Half Duplex Capable */ 2650#define NWAY_ER_PAR_DETECT_FAULT 0x0010 /* LP is 100TX Full Duplex Capable */ 2651 2652/* Next Page TX Register */ 2653#define NPTX_MSG_CODE_FIELD 0x0001 /* NP msg code or unformatted data */ 2654#define NPTX_TOGGLE 0x0800 /* Toggles between exchanges 2655 * of different NP 2656 */ 2657#define NPTX_ACKNOWLDGE2 0x1000 /* 1 = will comply with msg 2658 * 0 = cannot comply with msg 2659 */ 2660#define NPTX_MSG_PAGE 0x2000 /* formatted(1)/unformatted(0) pg */ 2661#define NPTX_NEXT_PAGE 0x8000 /* 1 = addition NP will follow 2662 * 0 = sending last NP 2663 */ 2664 2665/* Link Partner Next Page Register */ 2666#define LP_RNPR_MSG_CODE_FIELD 0x0001 /* NP msg code or unformatted data */ 2667#define LP_RNPR_TOGGLE 0x0800 /* Toggles between exchanges 2668 * of different NP 2669 */ 2670#define LP_RNPR_ACKNOWLDGE2 0x1000 /* 1 = will comply with msg 2671 * 0 = cannot comply with msg 2672 */ 2673#define LP_RNPR_MSG_PAGE 0x2000 /* formatted(1)/unformatted(0) pg */ 2674#define LP_RNPR_ACKNOWLDGE 0x4000 /* 1 = ACK / 0 = NO ACK */ 2675#define LP_RNPR_NEXT_PAGE 0x8000 /* 1 = addition NP will follow 2676 * 0 = sending last NP 2677 */ 2678 2679/* 1000BASE-T Control Register */ 2680#define CR_1000T_ASYM_PAUSE 0x0080 /* Advertise asymmetric pause bit */ 2681#define CR_1000T_HD_CAPS 0x0100 /* Advertise 1000T HD capability */ 2682#define CR_1000T_FD_CAPS 0x0200 /* Advertise 1000T FD capability */ 2683#define CR_1000T_REPEATER_DTE 0x0400 /* 1=Repeater/switch device port */ 2684 /* 0=DTE device */ 2685#define CR_1000T_MS_VALUE 0x0800 /* 1=Configure PHY as Master */ 2686 /* 0=Configure PHY as Slave */ 2687#define CR_1000T_MS_ENABLE 0x1000 /* 1=Master/Slave manual config value */ 2688 /* 0=Automatic Master/Slave config */ 2689#define CR_1000T_TEST_MODE_NORMAL 0x0000 /* Normal Operation */ 2690#define CR_1000T_TEST_MODE_1 0x2000 /* Transmit Waveform test */ 2691#define CR_1000T_TEST_MODE_2 0x4000 /* Master Transmit Jitter test */ 2692#define CR_1000T_TEST_MODE_3 0x6000 /* Slave Transmit Jitter test */ 2693#define CR_1000T_TEST_MODE_4 0x8000 /* Transmitter Distortion test */ 2694 2695/* 1000BASE-T Status Register */ 2696#define SR_1000T_IDLE_ERROR_CNT 0x00FF /* Num idle errors since last read */ 2697#define SR_1000T_ASYM_PAUSE_DIR 0x0100 /* LP asymmetric pause direction bit */ 2698#define SR_1000T_LP_HD_CAPS 0x0400 /* LP is 1000T HD capable */ 2699#define SR_1000T_LP_FD_CAPS 0x0800 /* LP is 1000T FD capable */ 2700#define SR_1000T_REMOTE_RX_STATUS 0x1000 /* Remote receiver OK */ 2701#define SR_1000T_LOCAL_RX_STATUS 0x2000 /* Local receiver OK */ 2702#define SR_1000T_MS_CONFIG_RES 0x4000 /* 1=Local TX is Master, 0=Slave */ 2703#define SR_1000T_MS_CONFIG_FAULT 0x8000 /* Master/Slave config fault */ 2704#define SR_1000T_REMOTE_RX_STATUS_SHIFT 12 2705#define SR_1000T_LOCAL_RX_STATUS_SHIFT 13 2706#define SR_1000T_PHY_EXCESSIVE_IDLE_ERR_COUNT 5 2707#define FFE_IDLE_ERR_COUNT_TIMEOUT_20 20 2708#define FFE_IDLE_ERR_COUNT_TIMEOUT_100 100 2709 2710/* Extended Status Register */ 2711#define IEEE_ESR_1000T_HD_CAPS 0x1000 /* 1000T HD capable */ 2712#define IEEE_ESR_1000T_FD_CAPS 0x2000 /* 1000T FD capable */ 2713#define IEEE_ESR_1000X_HD_CAPS 0x4000 /* 1000X HD capable */ 2714#define IEEE_ESR_1000X_FD_CAPS 0x8000 /* 1000X FD capable */ 2715 2716#define PHY_TX_POLARITY_MASK 0x0100 /* register 10h bit 8 (polarity bit) */ 2717#define PHY_TX_NORMAL_POLARITY 0 /* register 10h bit 8 (normal polarity) */ 2718 2719#define AUTO_POLARITY_DISABLE 0x0010 /* register 11h bit 4 */ 2720 /* (0=enable, 1=disable) */ 2721 2722/* M88E1000 PHY Specific Control Register */ 2723#define M88E1000_PSCR_JABBER_DISABLE 0x0001 /* 1=Jabber Function disabled */ 2724#define M88E1000_PSCR_POLARITY_REVERSAL 0x0002 /* 1=Polarity Reversal enabled */ 2725#define M88E1000_PSCR_SQE_TEST 0x0004 /* 1=SQE Test enabled */ 2726#define M88E1000_PSCR_CLK125_DISABLE 0x0010 /* 1=CLK125 low, 2727 * 0=CLK125 toggling 2728 */ 2729#define M88E1000_PSCR_MDI_MANUAL_MODE 0x0000 /* MDI Crossover Mode bits 6:5 */ 2730 /* Manual MDI configuration */ 2731#define M88E1000_PSCR_MDIX_MANUAL_MODE 0x0020 /* Manual MDIX configuration */ 2732#define M88E1000_PSCR_AUTO_X_1000T 0x0040 /* 1000BASE-T: Auto crossover, 2733 * 100BASE-TX/10BASE-T: 2734 * MDI Mode 2735 */ 2736#define M88E1000_PSCR_AUTO_X_MODE 0x0060 /* Auto crossover enabled 2737 * all speeds. 2738 */ 2739#define M88E1000_PSCR_10BT_EXT_DIST_ENABLE 0x0080 2740 /* 1=Enable Extended 10BASE-T distance 2741 * (Lower 10BASE-T RX Threshold) 2742 * 0=Normal 10BASE-T RX Threshold */ 2743#define M88E1000_PSCR_MII_5BIT_ENABLE 0x0100 2744 /* 1=5-Bit interface in 100BASE-TX 2745 * 0=MII interface in 100BASE-TX */ 2746#define M88E1000_PSCR_SCRAMBLER_DISABLE 0x0200 /* 1=Scrambler disable */ 2747#define M88E1000_PSCR_FORCE_LINK_GOOD 0x0400 /* 1=Force link good */ 2748#define M88E1000_PSCR_ASSERT_CRS_ON_TX 0x0800 /* 1=Assert CRS on Transmit */ 2749 2750#define M88E1000_PSCR_POLARITY_REVERSAL_SHIFT 1 2751#define M88E1000_PSCR_AUTO_X_MODE_SHIFT 5 2752#define M88E1000_PSCR_10BT_EXT_DIST_ENABLE_SHIFT 7 2753 2754/* M88E1000 PHY Specific Status Register */ 2755#define M88E1000_PSSR_JABBER 0x0001 /* 1=Jabber */ 2756#define M88E1000_PSSR_REV_POLARITY 0x0002 /* 1=Polarity reversed */ 2757#define M88E1000_PSSR_DOWNSHIFT 0x0020 /* 1=Downshifted */ 2758#define M88E1000_PSSR_MDIX 0x0040 /* 1=MDIX; 0=MDI */ 2759#define M88E1000_PSSR_CABLE_LENGTH 0x0380 /* 0=<50M;1=50-80M;2=80-110M; 2760 * 3=110-140M;4=>140M */ 2761#define M88E1000_PSSR_LINK 0x0400 /* 1=Link up, 0=Link down */ 2762#define M88E1000_PSSR_SPD_DPLX_RESOLVED 0x0800 /* 1=Speed & Duplex resolved */ 2763#define M88E1000_PSSR_PAGE_RCVD 0x1000 /* 1=Page received */ 2764#define M88E1000_PSSR_DPLX 0x2000 /* 1=Duplex 0=Half Duplex */ 2765#define M88E1000_PSSR_SPEED 0xC000 /* Speed, bits 14:15 */ 2766#define M88E1000_PSSR_10MBS 0x0000 /* 00=10Mbs */ 2767#define M88E1000_PSSR_100MBS 0x4000 /* 01=100Mbs */ 2768#define M88E1000_PSSR_1000MBS 0x8000 /* 10=1000Mbs */ 2769 2770#define M88E1000_PSSR_REV_POLARITY_SHIFT 1 2771#define M88E1000_PSSR_DOWNSHIFT_SHIFT 5 2772#define M88E1000_PSSR_MDIX_SHIFT 6 2773#define M88E1000_PSSR_CABLE_LENGTH_SHIFT 7 2774 2775/* M88E1000 Extended PHY Specific Control Register */ 2776#define M88E1000_EPSCR_FIBER_LOOPBACK 0x4000 /* 1=Fiber loopback */ 2777#define M88E1000_EPSCR_DOWN_NO_IDLE 0x8000 /* 1=Lost lock detect enabled. 2778 * Will assert lost lock and bring 2779 * link down if idle not seen 2780 * within 1ms in 1000BASE-T 2781 */ 2782/* Number of times we will attempt to autonegotiate before downshifting if we 2783 * are the master */ 2784#define M88E1000_EPSCR_MASTER_DOWNSHIFT_MASK 0x0C00 2785#define M88E1000_EPSCR_MASTER_DOWNSHIFT_1X 0x0000 2786#define M88E1000_EPSCR_MASTER_DOWNSHIFT_2X 0x0400 2787#define M88E1000_EPSCR_MASTER_DOWNSHIFT_3X 0x0800 2788#define M88E1000_EPSCR_MASTER_DOWNSHIFT_4X 0x0C00 2789/* Number of times we will attempt to autonegotiate before downshifting if we 2790 * are the slave */ 2791#define M88E1000_EPSCR_SLAVE_DOWNSHIFT_MASK 0x0300 2792#define M88E1000_EPSCR_SLAVE_DOWNSHIFT_DIS 0x0000 2793#define M88E1000_EPSCR_SLAVE_DOWNSHIFT_1X 0x0100 2794#define M88E1000_EPSCR_SLAVE_DOWNSHIFT_2X 0x0200 2795#define M88E1000_EPSCR_SLAVE_DOWNSHIFT_3X 0x0300 2796#define M88E1000_EPSCR_TX_CLK_2_5 0x0060 /* 2.5 MHz TX_CLK */ 2797#define M88E1000_EPSCR_TX_CLK_25 0x0070 /* 25 MHz TX_CLK */ 2798#define M88E1000_EPSCR_TX_CLK_0 0x0000 /* NO TX_CLK */ 2799 2800/* M88EC018 Rev 2 specific DownShift settings */ 2801#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_MASK 0x0E00 2802#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_1X 0x0000 2803#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_2X 0x0200 2804#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_3X 0x0400 2805#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_4X 0x0600 2806#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_5X 0x0800 2807#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_6X 0x0A00 2808#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_7X 0x0C00 2809#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_8X 0x0E00 2810 2811/* IGP01E1000 Specific Port Config Register - R/W */ 2812#define IGP01E1000_PSCFR_AUTO_MDIX_PAR_DETECT 0x0010 2813#define IGP01E1000_PSCFR_PRE_EN 0x0020 2814#define IGP01E1000_PSCFR_SMART_SPEED 0x0080 2815#define IGP01E1000_PSCFR_DISABLE_TPLOOPBACK 0x0100 2816#define IGP01E1000_PSCFR_DISABLE_JABBER 0x0400 2817#define IGP01E1000_PSCFR_DISABLE_TRANSMIT 0x2000 2818 2819/* IGP01E1000 Specific Port Status Register - R/O */ 2820#define IGP01E1000_PSSR_AUTONEG_FAILED 0x0001 /* RO LH SC */ 2821#define IGP01E1000_PSSR_POLARITY_REVERSED 0x0002 2822#define IGP01E1000_PSSR_CABLE_LENGTH 0x007C 2823#define IGP01E1000_PSSR_FULL_DUPLEX 0x0200 2824#define IGP01E1000_PSSR_LINK_UP 0x0400 2825#define IGP01E1000_PSSR_MDIX 0x0800 2826#define IGP01E1000_PSSR_SPEED_MASK 0xC000 /* speed bits mask */ 2827#define IGP01E1000_PSSR_SPEED_10MBPS 0x4000 2828#define IGP01E1000_PSSR_SPEED_100MBPS 0x8000 2829#define IGP01E1000_PSSR_SPEED_1000MBPS 0xC000 2830#define IGP01E1000_PSSR_CABLE_LENGTH_SHIFT 0x0002 /* shift right 2 */ 2831#define IGP01E1000_PSSR_MDIX_SHIFT 0x000B /* shift right 11 */ 2832 2833/* IGP01E1000 Specific Port Control Register - R/W */ 2834#define IGP01E1000_PSCR_TP_LOOPBACK 0x0010 2835#define IGP01E1000_PSCR_CORRECT_NC_SCMBLR 0x0200 2836#define IGP01E1000_PSCR_TEN_CRS_SELECT 0x0400 2837#define IGP01E1000_PSCR_FLIP_CHIP 0x0800 2838#define IGP01E1000_PSCR_AUTO_MDIX 0x1000 2839#define IGP01E1000_PSCR_FORCE_MDI_MDIX 0x2000 /* 0-MDI, 1-MDIX */ 2840 2841/* IGP01E1000 Specific Port Link Health Register */ 2842#define IGP01E1000_PLHR_SS_DOWNGRADE 0x8000 2843#define IGP01E1000_PLHR_GIG_SCRAMBLER_ERROR 0x4000 2844#define IGP01E1000_PLHR_MASTER_FAULT 0x2000 2845#define IGP01E1000_PLHR_MASTER_RESOLUTION 0x1000 2846#define IGP01E1000_PLHR_GIG_REM_RCVR_NOK 0x0800 /* LH */ 2847#define IGP01E1000_PLHR_IDLE_ERROR_CNT_OFLOW 0x0400 /* LH */ 2848#define IGP01E1000_PLHR_DATA_ERR_1 0x0200 /* LH */ 2849#define IGP01E1000_PLHR_DATA_ERR_0 0x0100 2850#define IGP01E1000_PLHR_AUTONEG_FAULT 0x0040 2851#define IGP01E1000_PLHR_AUTONEG_ACTIVE 0x0010 2852#define IGP01E1000_PLHR_VALID_CHANNEL_D 0x0008 2853#define IGP01E1000_PLHR_VALID_CHANNEL_C 0x0004 2854#define IGP01E1000_PLHR_VALID_CHANNEL_B 0x0002 2855#define IGP01E1000_PLHR_VALID_CHANNEL_A 0x0001 2856 2857/* IGP01E1000 Channel Quality Register */ 2858#define IGP01E1000_MSE_CHANNEL_D 0x000F 2859#define IGP01E1000_MSE_CHANNEL_C 0x00F0 2860#define IGP01E1000_MSE_CHANNEL_B 0x0F00 2861#define IGP01E1000_MSE_CHANNEL_A 0xF000 2862 2863#define IGP02E1000_PM_SPD 0x0001 /* Smart Power Down */ 2864#define IGP02E1000_PM_D3_LPLU 0x0004 /* Enable LPLU in non-D0a modes */ 2865#define IGP02E1000_PM_D0_LPLU 0x0002 /* Enable LPLU in D0a mode */ 2866 2867/* IGP01E1000 DSP reset macros */ 2868#define DSP_RESET_ENABLE 0x0 2869#define DSP_RESET_DISABLE 0x2 2870#define E1000_MAX_DSP_RESETS 10 2871 2872/* IGP01E1000 & IGP02E1000 AGC Registers */ 2873 2874#define IGP01E1000_AGC_LENGTH_SHIFT 7 /* Coarse - 13:11, Fine - 10:7 */ 2875#define IGP02E1000_AGC_LENGTH_SHIFT 9 /* Coarse - 15:13, Fine - 12:9 */ 2876 2877/* IGP02E1000 AGC Register Length 9-bit mask */ 2878#define IGP02E1000_AGC_LENGTH_MASK 0x7F 2879 2880/* 7 bits (3 Coarse + 4 Fine) --> 128 optional values */ 2881#define IGP01E1000_AGC_LENGTH_TABLE_SIZE 128 2882#define IGP02E1000_AGC_LENGTH_TABLE_SIZE 113 2883 2884/* The precision error of the cable length is +/- 10 meters */ 2885#define IGP01E1000_AGC_RANGE 10 2886#define IGP02E1000_AGC_RANGE 15 2887 2888/* IGP01E1000 PCS Initialization register */ 2889/* bits 3:6 in the PCS registers stores the channels polarity */ 2890#define IGP01E1000_PHY_POLARITY_MASK 0x0078 2891 2892/* IGP01E1000 GMII FIFO Register */ 2893#define IGP01E1000_GMII_FLEX_SPD 0x10 /* Enable flexible speed 2894 * on Link-Up */ 2895#define IGP01E1000_GMII_SPD 0x20 /* Enable SPD */ 2896 2897/* IGP01E1000 Analog Register */ 2898#define IGP01E1000_ANALOG_SPARE_FUSE_STATUS 0x20D1 2899#define IGP01E1000_ANALOG_FUSE_STATUS 0x20D0 2900#define IGP01E1000_ANALOG_FUSE_CONTROL 0x20DC 2901#define IGP01E1000_ANALOG_FUSE_BYPASS 0x20DE 2902 2903#define IGP01E1000_ANALOG_FUSE_POLY_MASK 0xF000 2904#define IGP01E1000_ANALOG_FUSE_FINE_MASK 0x0F80 2905#define IGP01E1000_ANALOG_FUSE_COARSE_MASK 0x0070 2906#define IGP01E1000_ANALOG_SPARE_FUSE_ENABLED 0x0100 2907#define IGP01E1000_ANALOG_FUSE_ENABLE_SW_CONTROL 0x0002 2908 2909#define IGP01E1000_ANALOG_FUSE_COARSE_THRESH 0x0040 2910#define IGP01E1000_ANALOG_FUSE_COARSE_10 0x0010 2911#define IGP01E1000_ANALOG_FUSE_FINE_1 0x0080 2912#define IGP01E1000_ANALOG_FUSE_FINE_10 0x0500 2913 2914/* Bit definitions for valid PHY IDs. */ 2915/* I = Integrated 2916 * E = External 2917 */ 2918#define M88_VENDOR 0x0141 2919#define M88E1000_E_PHY_ID 0x01410C50 2920#define M88E1000_I_PHY_ID 0x01410C30 2921#define M88E1011_I_PHY_ID 0x01410C20 2922#define IGP01E1000_I_PHY_ID 0x02A80380 2923#define M88E1000_12_PHY_ID M88E1000_E_PHY_ID 2924#define M88E1000_14_PHY_ID M88E1000_E_PHY_ID 2925#define M88E1011_I_REV_4 0x04 2926#define M88E1111_I_PHY_ID 0x01410CC0 2927#define M88E1118_E_PHY_ID 0x01410E40 2928#define L1LXT971A_PHY_ID 0x001378E0 2929 2930#define RTL8211B_PHY_ID 0x001CC910 2931#define RTL8201N_PHY_ID 0x8200 2932#define RTL_PHY_CTRL_FD 0x0100 /* Full duplex.0=half; 1=full */ 2933#define RTL_PHY_CTRL_SPD_100 0x200000 /* Force 100Mb */ 2934 2935/* Bits... 2936 * 15-5: page 2937 * 4-0: register offset 2938 */ 2939#define PHY_PAGE_SHIFT 5 2940#define PHY_REG(page, reg) \ 2941 (((page) << PHY_PAGE_SHIFT) | ((reg) & MAX_PHY_REG_ADDRESS)) 2942 2943#define IGP3_PHY_PORT_CTRL \ 2944 PHY_REG(769, 17) /* Port General Configuration */ 2945#define IGP3_PHY_RATE_ADAPT_CTRL \ 2946 PHY_REG(769, 25) /* Rate Adapter Control Register */ 2947 2948#define IGP3_KMRN_FIFO_CTRL_STATS \ 2949 PHY_REG(770, 16) /* KMRN FIFO's control/status register */ 2950#define IGP3_KMRN_POWER_MNG_CTRL \ 2951 PHY_REG(770, 17) /* KMRN Power Management Control Register */ 2952#define IGP3_KMRN_INBAND_CTRL \ 2953 PHY_REG(770, 18) /* KMRN Inband Control Register */ 2954#define IGP3_KMRN_DIAG \ 2955 PHY_REG(770, 19) /* KMRN Diagnostic register */ 2956#define IGP3_KMRN_DIAG_PCS_LOCK_LOSS 0x0002 /* RX PCS is not synced */ 2957#define IGP3_KMRN_ACK_TIMEOUT \ 2958 PHY_REG(770, 20) /* KMRN Acknowledge Timeouts register */ 2959 2960#define IGP3_VR_CTRL \ 2961 PHY_REG(776, 18) /* Voltage regulator control register */ 2962#define IGP3_VR_CTRL_MODE_SHUT 0x0200 /* Enter powerdown, shutdown VRs */ 2963#define IGP3_VR_CTRL_MODE_MASK 0x0300 /* Shutdown VR Mask */ 2964 2965#define IGP3_CAPABILITY \ 2966 PHY_REG(776, 19) /* IGP3 Capability Register */ 2967 2968/* Capabilities for SKU Control */ 2969#define IGP3_CAP_INITIATE_TEAM 0x0001 /* Able to initiate a team */ 2970#define IGP3_CAP_WFM 0x0002 /* Support WoL and PXE */ 2971#define IGP3_CAP_ASF 0x0004 /* Support ASF */ 2972#define IGP3_CAP_LPLU 0x0008 /* Support Low Power Link Up */ 2973#define IGP3_CAP_DC_AUTO_SPEED 0x0010 /* Support AC/DC Auto Link Speed */ 2974#define IGP3_CAP_SPD 0x0020 /* Support Smart Power Down */ 2975#define IGP3_CAP_MULT_QUEUE 0x0040 /* Support 2 tx & 2 rx queues */ 2976#define IGP3_CAP_RSS 0x0080 /* Support RSS */ 2977#define IGP3_CAP_8021PQ 0x0100 /* Support 802.1Q & 802.1p */ 2978#define IGP3_CAP_AMT_CB 0x0200 /* Support active manageability and circuit breaker */ 2979 2980#define IGP3_PPC_JORDAN_EN 0x0001 2981#define IGP3_PPC_JORDAN_GIGA_SPEED 0x0002 2982 2983#define IGP3_KMRN_PMC_EE_IDLE_LINK_DIS 0x0001 2984#define IGP3_KMRN_PMC_K0S_ENTRY_LATENCY_MASK 0x001E 2985#define IGP3_KMRN_PMC_K0S_MODE1_EN_GIGA 0x0020 2986#define IGP3_KMRN_PMC_K0S_MODE1_EN_100 0x0040 2987 2988#define IGP3E1000_PHY_MISC_CTRL 0x1B /* Misc. Ctrl register */ 2989#define IGP3_PHY_MISC_DUPLEX_MANUAL_SET 0x1000 /* Duplex Manual Set */ 2990 2991#define IGP3_KMRN_EXT_CTRL PHY_REG(770, 18) 2992#define IGP3_KMRN_EC_DIS_INBAND 0x0080 2993 2994#define IGP03E1000_E_PHY_ID 0x02A80390 2995#define IFE_E_PHY_ID 0x02A80330 /* 10/100 PHY */ 2996#define IFE_PLUS_E_PHY_ID 0x02A80320 2997#define IFE_C_E_PHY_ID 0x02A80310 2998 2999#define IFE_PHY_EXTENDED_STATUS_CONTROL 0x10 /* 100BaseTx Extended Status, Control and Address */ 3000#define IFE_PHY_SPECIAL_CONTROL 0x11 /* 100BaseTx PHY special control register */ 3001#define IFE_PHY_RCV_FALSE_CARRIER 0x13 /* 100BaseTx Receive False Carrier Counter */ 3002#define IFE_PHY_RCV_DISCONNECT 0x14 /* 100BaseTx Receive Disconnect Counter */ 3003#define IFE_PHY_RCV_ERROT_FRAME 0x15 /* 100BaseTx Receive Error Frame Counter */ 3004#define IFE_PHY_RCV_SYMBOL_ERR 0x16 /* Receive Symbol Error Counter */ 3005#define IFE_PHY_PREM_EOF_ERR 0x17 /* 100BaseTx Receive Premature End Of Frame Error Counter */ 3006#define IFE_PHY_RCV_EOF_ERR 0x18 /* 10BaseT Receive End Of Frame Error Counter */ 3007#define IFE_PHY_TX_JABBER_DETECT 0x19 /* 10BaseT Transmit Jabber Detect Counter */ 3008#define IFE_PHY_EQUALIZER 0x1A /* PHY Equalizer Control and Status */ 3009#define IFE_PHY_SPECIAL_CONTROL_LED 0x1B /* PHY special control and LED configuration */ 3010#define IFE_PHY_MDIX_CONTROL 0x1C /* MDI/MDI-X Control register */ 3011#define IFE_PHY_HWI_CONTROL 0x1D /* Hardware Integrity Control (HWI) */ 3012 3013#define IFE_PESC_REDUCED_POWER_DOWN_DISABLE 0x2000 /* Default 1 = Disable auto reduced power down */ 3014#define IFE_PESC_100BTX_POWER_DOWN 0x0400 /* Indicates the power state of 100BASE-TX */ 3015#define IFE_PESC_10BTX_POWER_DOWN 0x0200 /* Indicates the power state of 10BASE-T */ 3016#define IFE_PESC_POLARITY_REVERSED 0x0100 /* Indicates 10BASE-T polarity */ 3017#define IFE_PESC_PHY_ADDR_MASK 0x007C /* Bit 6:2 for sampled PHY address */ 3018#define IFE_PESC_SPEED 0x0002 /* Auto-negotiation speed result 1=100Mbs, 0=10Mbs */ 3019#define IFE_PESC_DUPLEX 0x0001 /* Auto-negotiation duplex result 1=Full, 0=Half */ 3020#define IFE_PESC_POLARITY_REVERSED_SHIFT 8 3021 3022#define IFE_PSC_DISABLE_DYNAMIC_POWER_DOWN 0x0100 /* 1 = Dynamic Power Down disabled */ 3023#define IFE_PSC_FORCE_POLARITY 0x0020 /* 1=Reversed Polarity, 0=Normal */ 3024#define IFE_PSC_AUTO_POLARITY_DISABLE 0x0010 /* 1=Auto Polarity Disabled, 0=Enabled */ 3025#define IFE_PSC_JABBER_FUNC_DISABLE 0x0001 /* 1=Jabber Disabled, 0=Normal Jabber Operation */ 3026#define IFE_PSC_FORCE_POLARITY_SHIFT 5 3027#define IFE_PSC_AUTO_POLARITY_DISABLE_SHIFT 4 3028 3029#define IFE_PMC_AUTO_MDIX 0x0080 /* 1=enable MDI/MDI-X feature, default 0=disabled */ 3030#define IFE_PMC_FORCE_MDIX 0x0040 /* 1=force MDIX-X, 0=force MDI */ 3031#define IFE_PMC_MDIX_STATUS 0x0020 /* 1=MDI-X, 0=MDI */ 3032#define IFE_PMC_AUTO_MDIX_COMPLETE 0x0010 /* Resolution algorithm is completed */ 3033#define IFE_PMC_MDIX_MODE_SHIFT 6 3034#define IFE_PHC_MDIX_RESET_ALL_MASK 0x0000 /* Disable auto MDI-X */ 3035 3036#define IFE_PHC_HWI_ENABLE 0x8000 /* Enable the HWI feature */ 3037#define IFE_PHC_ABILITY_CHECK 0x4000 /* 1= Test Passed, 0=failed */ 3038#define IFE_PHC_TEST_EXEC 0x2000 /* PHY launch test pulses on the wire */ 3039#define IFE_PHC_HIGHZ 0x0200 /* 1 = Open Circuit */ 3040#define IFE_PHC_LOWZ 0x0400 /* 1 = Short Circuit */ 3041#define IFE_PHC_LOW_HIGH_Z_MASK 0x0600 /* Mask for indication type of problem on the line */ 3042#define IFE_PHC_DISTANCE_MASK 0x01FF /* Mask for distance to the cable problem, in 80cm granularity */ 3043#define IFE_PHC_RESET_ALL_MASK 0x0000 /* Disable HWI */ 3044#define IFE_PSCL_PROBE_MODE 0x0020 /* LED Probe mode */ 3045#define IFE_PSCL_PROBE_LEDS_OFF 0x0006 /* Force LEDs 0 and 2 off */ 3046#define IFE_PSCL_PROBE_LEDS_ON 0x0007 /* Force LEDs 0 and 2 on */ 3047 3048#define ICH_FLASH_COMMAND_TIMEOUT 5000 /* 5000 uSecs - adjusted */ 3049#define ICH_FLASH_ERASE_TIMEOUT 3000000 /* Up to 3 seconds - worst case */ 3050#define ICH_FLASH_CYCLE_REPEAT_COUNT 10 /* 10 cycles */ 3051#define ICH_FLASH_SEG_SIZE_256 256 3052#define ICH_FLASH_SEG_SIZE_4K 4096 3053#define ICH_FLASH_SEG_SIZE_64K 65536 3054 3055#define ICH_CYCLE_READ 0x0 3056#define ICH_CYCLE_RESERVED 0x1 3057#define ICH_CYCLE_WRITE 0x2 3058#define ICH_CYCLE_ERASE 0x3 3059 3060#define ICH_FLASH_GFPREG 0x0000 3061#define ICH_FLASH_HSFSTS 0x0004 3062#define ICH_FLASH_HSFCTL 0x0006 3063#define ICH_FLASH_FADDR 0x0008 3064#define ICH_FLASH_FDATA0 0x0010 3065#define ICH_FLASH_FRACC 0x0050 3066#define ICH_FLASH_FREG0 0x0054 3067#define ICH_FLASH_FREG1 0x0058 3068#define ICH_FLASH_FREG2 0x005C 3069#define ICH_FLASH_FREG3 0x0060 3070#define ICH_FLASH_FPR0 0x0074 3071#define ICH_FLASH_FPR1 0x0078 3072#define ICH_FLASH_SSFSTS 0x0090 3073#define ICH_FLASH_SSFCTL 0x0092 3074#define ICH_FLASH_PREOP 0x0094 3075#define ICH_FLASH_OPTYPE 0x0096 3076#define ICH_FLASH_OPMENU 0x0098 3077 3078#define ICH_FLASH_REG_MAPSIZE 0x00A0 3079#define ICH_FLASH_SECTOR_SIZE 4096 3080#define ICH_GFPREG_BASE_MASK 0x1FFF 3081#define ICH_FLASH_LINEAR_ADDR_MASK 0x00FFFFFF 3082 3083/* Miscellaneous PHY bit definitions. */ 3084#define PHY_PREAMBLE 0xFFFFFFFF 3085#define PHY_SOF 0x01 3086#define PHY_OP_READ 0x02 3087#define PHY_OP_WRITE 0x01 3088#define PHY_TURNAROUND 0x02 3089#define PHY_PREAMBLE_SIZE 32 3090#define MII_CR_SPEED_1000 0x0040 3091#define MII_CR_SPEED_100 0x2000 3092#define MII_CR_SPEED_10 0x0000 3093#define E1000_PHY_ADDRESS 0x01 3094#define PHY_AUTO_NEG_TIME 45 /* 4.5 Seconds */ 3095#define PHY_FORCE_TIME 20 /* 2.0 Seconds */ 3096#define PHY_REVISION_MASK 0xFFFFFFF0 3097#define DEVICE_SPEED_MASK 0x00000300 /* Device Ctrl Reg Speed Mask */ 3098#define REG4_SPEED_MASK 0x01E0 3099#define REG9_SPEED_MASK 0x0300 3100#define ADVERTISE_10_HALF 0x0001 3101#define ADVERTISE_10_FULL 0x0002 3102#define ADVERTISE_100_HALF 0x0004 3103#define ADVERTISE_100_FULL 0x0008 3104#define ADVERTISE_1000_HALF 0x0010 3105#define ADVERTISE_1000_FULL 0x0020 3106#define AUTONEG_ADVERTISE_SPEED_DEFAULT 0x002F /* Everything but 1000-Half */ 3107#define AUTONEG_ADVERTISE_10_100_ALL 0x000F /* All 10/100 speeds */ 3108#define AUTONEG_ADVERTISE_10_ALL 0x0003 /* 10Mbps Full & Half speeds */ 3109 3110#endif /* _E1000_HW_H_ */ 3111