1/******************************************************************************* 2 3 Intel 10 Gigabit PCI Express Linux driver 4 Copyright(c) 1999 - 2014 Intel Corporation. 5 6 This program is free software; you can redistribute it and/or modify it 7 under the terms and conditions of the GNU General Public License, 8 version 2, as published by the Free Software Foundation. 9 10 This program is distributed in the hope it will be useful, but WITHOUT 11 ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 12 FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 13 more details. 14 15 You should have received a copy of the GNU General Public License along with 16 this program; if not, write to the Free Software Foundation, Inc., 17 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. 18 19 The full GNU General Public License is included in this distribution in 20 the file called "COPYING". 21 22 Contact Information: 23 Linux NICS <linux.nics@intel.com> 24 e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> 25 Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 26 27*******************************************************************************/ 28 29#include <linux/pci.h> 30#include <linux/delay.h> 31#include <linux/sched.h> 32#include <linux/netdevice.h> 33 34#include "ixgbe.h" 35#include "ixgbe_common.h" 36#include "ixgbe_phy.h" 37 38static s32 ixgbe_acquire_eeprom(struct ixgbe_hw *hw); 39static s32 ixgbe_get_eeprom_semaphore(struct ixgbe_hw *hw); 40static void ixgbe_release_eeprom_semaphore(struct ixgbe_hw *hw); 41static s32 ixgbe_ready_eeprom(struct ixgbe_hw *hw); 42static void ixgbe_standby_eeprom(struct ixgbe_hw *hw); 43static void ixgbe_shift_out_eeprom_bits(struct ixgbe_hw *hw, u16 data, 44 u16 count); 45static u16 ixgbe_shift_in_eeprom_bits(struct ixgbe_hw *hw, u16 count); 46static void ixgbe_raise_eeprom_clk(struct ixgbe_hw *hw, u32 *eec); 47static void ixgbe_lower_eeprom_clk(struct ixgbe_hw *hw, u32 *eec); 48static void ixgbe_release_eeprom(struct ixgbe_hw *hw); 49 50static s32 ixgbe_mta_vector(struct ixgbe_hw *hw, u8 *mc_addr); 51static s32 ixgbe_poll_eerd_eewr_done(struct ixgbe_hw *hw, u32 ee_reg); 52static s32 ixgbe_read_eeprom_buffer_bit_bang(struct ixgbe_hw *hw, u16 offset, 53 u16 words, u16 *data); 54static s32 ixgbe_write_eeprom_buffer_bit_bang(struct ixgbe_hw *hw, u16 offset, 55 u16 words, u16 *data); 56static s32 ixgbe_detect_eeprom_page_size_generic(struct ixgbe_hw *hw, 57 u16 offset); 58static s32 ixgbe_disable_pcie_master(struct ixgbe_hw *hw); 59 60/** 61 * ixgbe_device_supports_autoneg_fc - Check if phy supports autoneg flow 62 * control 63 * @hw: pointer to hardware structure 64 * 65 * There are several phys that do not support autoneg flow control. This 66 * function check the device id to see if the associated phy supports 67 * autoneg flow control. 68 **/ 69bool ixgbe_device_supports_autoneg_fc(struct ixgbe_hw *hw) 70{ 71 bool supported = false; 72 ixgbe_link_speed speed; 73 bool link_up; 74 75 switch (hw->phy.media_type) { 76 case ixgbe_media_type_fiber: 77 hw->mac.ops.check_link(hw, &speed, &link_up, false); 78 /* if link is down, assume supported */ 79 if (link_up) 80 supported = speed == IXGBE_LINK_SPEED_1GB_FULL ? 81 true : false; 82 else 83 supported = true; 84 break; 85 case ixgbe_media_type_backplane: 86 supported = true; 87 break; 88 case ixgbe_media_type_copper: 89 /* only some copper devices support flow control autoneg */ 90 switch (hw->device_id) { 91 case IXGBE_DEV_ID_82599_T3_LOM: 92 case IXGBE_DEV_ID_X540T: 93 case IXGBE_DEV_ID_X540T1: 94 supported = true; 95 break; 96 default: 97 break; 98 } 99 default: 100 break; 101 } 102 103 return supported; 104} 105 106/** 107 * ixgbe_setup_fc - Set up flow control 108 * @hw: pointer to hardware structure 109 * 110 * Called at init time to set up flow control. 111 **/ 112static s32 ixgbe_setup_fc(struct ixgbe_hw *hw) 113{ 114 s32 ret_val = 0; 115 u32 reg = 0, reg_bp = 0; 116 u16 reg_cu = 0; 117 bool locked = false; 118 119 /* 120 * Validate the requested mode. Strict IEEE mode does not allow 121 * ixgbe_fc_rx_pause because it will cause us to fail at UNH. 122 */ 123 if (hw->fc.strict_ieee && hw->fc.requested_mode == ixgbe_fc_rx_pause) { 124 hw_dbg(hw, "ixgbe_fc_rx_pause not valid in strict IEEE mode\n"); 125 return IXGBE_ERR_INVALID_LINK_SETTINGS; 126 } 127 128 /* 129 * 10gig parts do not have a word in the EEPROM to determine the 130 * default flow control setting, so we explicitly set it to full. 131 */ 132 if (hw->fc.requested_mode == ixgbe_fc_default) 133 hw->fc.requested_mode = ixgbe_fc_full; 134 135 /* 136 * Set up the 1G and 10G flow control advertisement registers so the 137 * HW will be able to do fc autoneg once the cable is plugged in. If 138 * we link at 10G, the 1G advertisement is harmless and vice versa. 139 */ 140 switch (hw->phy.media_type) { 141 case ixgbe_media_type_backplane: 142 /* some MAC's need RMW protection on AUTOC */ 143 ret_val = hw->mac.ops.prot_autoc_read(hw, &locked, ®_bp); 144 if (ret_val) 145 return ret_val; 146 147 /* only backplane uses autoc so fall though */ 148 case ixgbe_media_type_fiber: 149 reg = IXGBE_READ_REG(hw, IXGBE_PCS1GANA); 150 151 break; 152 case ixgbe_media_type_copper: 153 hw->phy.ops.read_reg(hw, MDIO_AN_ADVERTISE, 154 MDIO_MMD_AN, ®_cu); 155 break; 156 default: 157 break; 158 } 159 160 /* 161 * The possible values of fc.requested_mode are: 162 * 0: Flow control is completely disabled 163 * 1: Rx flow control is enabled (we can receive pause frames, 164 * but not send pause frames). 165 * 2: Tx flow control is enabled (we can send pause frames but 166 * we do not support receiving pause frames). 167 * 3: Both Rx and Tx flow control (symmetric) are enabled. 168 * other: Invalid. 169 */ 170 switch (hw->fc.requested_mode) { 171 case ixgbe_fc_none: 172 /* Flow control completely disabled by software override. */ 173 reg &= ~(IXGBE_PCS1GANA_SYM_PAUSE | IXGBE_PCS1GANA_ASM_PAUSE); 174 if (hw->phy.media_type == ixgbe_media_type_backplane) 175 reg_bp &= ~(IXGBE_AUTOC_SYM_PAUSE | 176 IXGBE_AUTOC_ASM_PAUSE); 177 else if (hw->phy.media_type == ixgbe_media_type_copper) 178 reg_cu &= ~(IXGBE_TAF_SYM_PAUSE | IXGBE_TAF_ASM_PAUSE); 179 break; 180 case ixgbe_fc_tx_pause: 181 /* 182 * Tx Flow control is enabled, and Rx Flow control is 183 * disabled by software override. 184 */ 185 reg |= IXGBE_PCS1GANA_ASM_PAUSE; 186 reg &= ~IXGBE_PCS1GANA_SYM_PAUSE; 187 if (hw->phy.media_type == ixgbe_media_type_backplane) { 188 reg_bp |= IXGBE_AUTOC_ASM_PAUSE; 189 reg_bp &= ~IXGBE_AUTOC_SYM_PAUSE; 190 } else if (hw->phy.media_type == ixgbe_media_type_copper) { 191 reg_cu |= IXGBE_TAF_ASM_PAUSE; 192 reg_cu &= ~IXGBE_TAF_SYM_PAUSE; 193 } 194 break; 195 case ixgbe_fc_rx_pause: 196 /* 197 * Rx Flow control is enabled and Tx Flow control is 198 * disabled by software override. Since there really 199 * isn't a way to advertise that we are capable of RX 200 * Pause ONLY, we will advertise that we support both 201 * symmetric and asymmetric Rx PAUSE, as such we fall 202 * through to the fc_full statement. Later, we will 203 * disable the adapter's ability to send PAUSE frames. 204 */ 205 case ixgbe_fc_full: 206 /* Flow control (both Rx and Tx) is enabled by SW override. */ 207 reg |= IXGBE_PCS1GANA_SYM_PAUSE | IXGBE_PCS1GANA_ASM_PAUSE; 208 if (hw->phy.media_type == ixgbe_media_type_backplane) 209 reg_bp |= IXGBE_AUTOC_SYM_PAUSE | 210 IXGBE_AUTOC_ASM_PAUSE; 211 else if (hw->phy.media_type == ixgbe_media_type_copper) 212 reg_cu |= IXGBE_TAF_SYM_PAUSE | IXGBE_TAF_ASM_PAUSE; 213 break; 214 default: 215 hw_dbg(hw, "Flow control param set incorrectly\n"); 216 return IXGBE_ERR_CONFIG; 217 } 218 219 if (hw->mac.type != ixgbe_mac_X540) { 220 /* 221 * Enable auto-negotiation between the MAC & PHY; 222 * the MAC will advertise clause 37 flow control. 223 */ 224 IXGBE_WRITE_REG(hw, IXGBE_PCS1GANA, reg); 225 reg = IXGBE_READ_REG(hw, IXGBE_PCS1GLCTL); 226 227 /* Disable AN timeout */ 228 if (hw->fc.strict_ieee) 229 reg &= ~IXGBE_PCS1GLCTL_AN_1G_TIMEOUT_EN; 230 231 IXGBE_WRITE_REG(hw, IXGBE_PCS1GLCTL, reg); 232 hw_dbg(hw, "Set up FC; PCS1GLCTL = 0x%08X\n", reg); 233 } 234 235 /* 236 * AUTOC restart handles negotiation of 1G and 10G on backplane 237 * and copper. There is no need to set the PCS1GCTL register. 238 * 239 */ 240 if (hw->phy.media_type == ixgbe_media_type_backplane) { 241 /* Need the SW/FW semaphore around AUTOC writes if 82599 and 242 * LESM is on, likewise reset_pipeline requries the lock as 243 * it also writes AUTOC. 244 */ 245 ret_val = hw->mac.ops.prot_autoc_write(hw, reg_bp, locked); 246 if (ret_val) 247 return ret_val; 248 249 } else if ((hw->phy.media_type == ixgbe_media_type_copper) && 250 ixgbe_device_supports_autoneg_fc(hw)) { 251 hw->phy.ops.write_reg(hw, MDIO_AN_ADVERTISE, 252 MDIO_MMD_AN, reg_cu); 253 } 254 255 hw_dbg(hw, "Set up FC; IXGBE_AUTOC = 0x%08X\n", reg); 256 return ret_val; 257} 258 259/** 260 * ixgbe_start_hw_generic - Prepare hardware for Tx/Rx 261 * @hw: pointer to hardware structure 262 * 263 * Starts the hardware by filling the bus info structure and media type, clears 264 * all on chip counters, initializes receive address registers, multicast 265 * table, VLAN filter table, calls routine to set up link and flow control 266 * settings, and leaves transmit and receive units disabled and uninitialized 267 **/ 268s32 ixgbe_start_hw_generic(struct ixgbe_hw *hw) 269{ 270 s32 ret_val; 271 u32 ctrl_ext; 272 273 /* Set the media type */ 274 hw->phy.media_type = hw->mac.ops.get_media_type(hw); 275 276 /* Identify the PHY */ 277 hw->phy.ops.identify(hw); 278 279 /* Clear the VLAN filter table */ 280 hw->mac.ops.clear_vfta(hw); 281 282 /* Clear statistics registers */ 283 hw->mac.ops.clear_hw_cntrs(hw); 284 285 /* Set No Snoop Disable */ 286 ctrl_ext = IXGBE_READ_REG(hw, IXGBE_CTRL_EXT); 287 ctrl_ext |= IXGBE_CTRL_EXT_NS_DIS; 288 IXGBE_WRITE_REG(hw, IXGBE_CTRL_EXT, ctrl_ext); 289 IXGBE_WRITE_FLUSH(hw); 290 291 /* Setup flow control */ 292 ret_val = ixgbe_setup_fc(hw); 293 if (!ret_val) 294 return 0; 295 296 /* Clear adapter stopped flag */ 297 hw->adapter_stopped = false; 298 299 return ret_val; 300} 301 302/** 303 * ixgbe_start_hw_gen2 - Init sequence for common device family 304 * @hw: pointer to hw structure 305 * 306 * Performs the init sequence common to the second generation 307 * of 10 GbE devices. 308 * Devices in the second generation: 309 * 82599 310 * X540 311 **/ 312s32 ixgbe_start_hw_gen2(struct ixgbe_hw *hw) 313{ 314 u32 i; 315 u32 regval; 316 317 /* Clear the rate limiters */ 318 for (i = 0; i < hw->mac.max_tx_queues; i++) { 319 IXGBE_WRITE_REG(hw, IXGBE_RTTDQSEL, i); 320 IXGBE_WRITE_REG(hw, IXGBE_RTTBCNRC, 0); 321 } 322 IXGBE_WRITE_FLUSH(hw); 323 324 /* Disable relaxed ordering */ 325 for (i = 0; i < hw->mac.max_tx_queues; i++) { 326 regval = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL_82599(i)); 327 regval &= ~IXGBE_DCA_TXCTRL_DESC_WRO_EN; 328 IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL_82599(i), regval); 329 } 330 331 for (i = 0; i < hw->mac.max_rx_queues; i++) { 332 regval = IXGBE_READ_REG(hw, IXGBE_DCA_RXCTRL(i)); 333 regval &= ~(IXGBE_DCA_RXCTRL_DATA_WRO_EN | 334 IXGBE_DCA_RXCTRL_HEAD_WRO_EN); 335 IXGBE_WRITE_REG(hw, IXGBE_DCA_RXCTRL(i), regval); 336 } 337 338 return 0; 339} 340 341/** 342 * ixgbe_init_hw_generic - Generic hardware initialization 343 * @hw: pointer to hardware structure 344 * 345 * Initialize the hardware by resetting the hardware, filling the bus info 346 * structure and media type, clears all on chip counters, initializes receive 347 * address registers, multicast table, VLAN filter table, calls routine to set 348 * up link and flow control settings, and leaves transmit and receive units 349 * disabled and uninitialized 350 **/ 351s32 ixgbe_init_hw_generic(struct ixgbe_hw *hw) 352{ 353 s32 status; 354 355 /* Reset the hardware */ 356 status = hw->mac.ops.reset_hw(hw); 357 358 if (status == 0) { 359 /* Start the HW */ 360 status = hw->mac.ops.start_hw(hw); 361 } 362 363 return status; 364} 365 366/** 367 * ixgbe_clear_hw_cntrs_generic - Generic clear hardware counters 368 * @hw: pointer to hardware structure 369 * 370 * Clears all hardware statistics counters by reading them from the hardware 371 * Statistics counters are clear on read. 372 **/ 373s32 ixgbe_clear_hw_cntrs_generic(struct ixgbe_hw *hw) 374{ 375 u16 i = 0; 376 377 IXGBE_READ_REG(hw, IXGBE_CRCERRS); 378 IXGBE_READ_REG(hw, IXGBE_ILLERRC); 379 IXGBE_READ_REG(hw, IXGBE_ERRBC); 380 IXGBE_READ_REG(hw, IXGBE_MSPDC); 381 for (i = 0; i < 8; i++) 382 IXGBE_READ_REG(hw, IXGBE_MPC(i)); 383 384 IXGBE_READ_REG(hw, IXGBE_MLFC); 385 IXGBE_READ_REG(hw, IXGBE_MRFC); 386 IXGBE_READ_REG(hw, IXGBE_RLEC); 387 IXGBE_READ_REG(hw, IXGBE_LXONTXC); 388 IXGBE_READ_REG(hw, IXGBE_LXOFFTXC); 389 if (hw->mac.type >= ixgbe_mac_82599EB) { 390 IXGBE_READ_REG(hw, IXGBE_LXONRXCNT); 391 IXGBE_READ_REG(hw, IXGBE_LXOFFRXCNT); 392 } else { 393 IXGBE_READ_REG(hw, IXGBE_LXONRXC); 394 IXGBE_READ_REG(hw, IXGBE_LXOFFRXC); 395 } 396 397 for (i = 0; i < 8; i++) { 398 IXGBE_READ_REG(hw, IXGBE_PXONTXC(i)); 399 IXGBE_READ_REG(hw, IXGBE_PXOFFTXC(i)); 400 if (hw->mac.type >= ixgbe_mac_82599EB) { 401 IXGBE_READ_REG(hw, IXGBE_PXONRXCNT(i)); 402 IXGBE_READ_REG(hw, IXGBE_PXOFFRXCNT(i)); 403 } else { 404 IXGBE_READ_REG(hw, IXGBE_PXONRXC(i)); 405 IXGBE_READ_REG(hw, IXGBE_PXOFFRXC(i)); 406 } 407 } 408 if (hw->mac.type >= ixgbe_mac_82599EB) 409 for (i = 0; i < 8; i++) 410 IXGBE_READ_REG(hw, IXGBE_PXON2OFFCNT(i)); 411 IXGBE_READ_REG(hw, IXGBE_PRC64); 412 IXGBE_READ_REG(hw, IXGBE_PRC127); 413 IXGBE_READ_REG(hw, IXGBE_PRC255); 414 IXGBE_READ_REG(hw, IXGBE_PRC511); 415 IXGBE_READ_REG(hw, IXGBE_PRC1023); 416 IXGBE_READ_REG(hw, IXGBE_PRC1522); 417 IXGBE_READ_REG(hw, IXGBE_GPRC); 418 IXGBE_READ_REG(hw, IXGBE_BPRC); 419 IXGBE_READ_REG(hw, IXGBE_MPRC); 420 IXGBE_READ_REG(hw, IXGBE_GPTC); 421 IXGBE_READ_REG(hw, IXGBE_GORCL); 422 IXGBE_READ_REG(hw, IXGBE_GORCH); 423 IXGBE_READ_REG(hw, IXGBE_GOTCL); 424 IXGBE_READ_REG(hw, IXGBE_GOTCH); 425 if (hw->mac.type == ixgbe_mac_82598EB) 426 for (i = 0; i < 8; i++) 427 IXGBE_READ_REG(hw, IXGBE_RNBC(i)); 428 IXGBE_READ_REG(hw, IXGBE_RUC); 429 IXGBE_READ_REG(hw, IXGBE_RFC); 430 IXGBE_READ_REG(hw, IXGBE_ROC); 431 IXGBE_READ_REG(hw, IXGBE_RJC); 432 IXGBE_READ_REG(hw, IXGBE_MNGPRC); 433 IXGBE_READ_REG(hw, IXGBE_MNGPDC); 434 IXGBE_READ_REG(hw, IXGBE_MNGPTC); 435 IXGBE_READ_REG(hw, IXGBE_TORL); 436 IXGBE_READ_REG(hw, IXGBE_TORH); 437 IXGBE_READ_REG(hw, IXGBE_TPR); 438 IXGBE_READ_REG(hw, IXGBE_TPT); 439 IXGBE_READ_REG(hw, IXGBE_PTC64); 440 IXGBE_READ_REG(hw, IXGBE_PTC127); 441 IXGBE_READ_REG(hw, IXGBE_PTC255); 442 IXGBE_READ_REG(hw, IXGBE_PTC511); 443 IXGBE_READ_REG(hw, IXGBE_PTC1023); 444 IXGBE_READ_REG(hw, IXGBE_PTC1522); 445 IXGBE_READ_REG(hw, IXGBE_MPTC); 446 IXGBE_READ_REG(hw, IXGBE_BPTC); 447 for (i = 0; i < 16; i++) { 448 IXGBE_READ_REG(hw, IXGBE_QPRC(i)); 449 IXGBE_READ_REG(hw, IXGBE_QPTC(i)); 450 if (hw->mac.type >= ixgbe_mac_82599EB) { 451 IXGBE_READ_REG(hw, IXGBE_QBRC_L(i)); 452 IXGBE_READ_REG(hw, IXGBE_QBRC_H(i)); 453 IXGBE_READ_REG(hw, IXGBE_QBTC_L(i)); 454 IXGBE_READ_REG(hw, IXGBE_QBTC_H(i)); 455 IXGBE_READ_REG(hw, IXGBE_QPRDC(i)); 456 } else { 457 IXGBE_READ_REG(hw, IXGBE_QBRC(i)); 458 IXGBE_READ_REG(hw, IXGBE_QBTC(i)); 459 } 460 } 461 462 if (hw->mac.type == ixgbe_mac_X540) { 463 if (hw->phy.id == 0) 464 hw->phy.ops.identify(hw); 465 hw->phy.ops.read_reg(hw, IXGBE_PCRC8ECL, MDIO_MMD_PCS, &i); 466 hw->phy.ops.read_reg(hw, IXGBE_PCRC8ECH, MDIO_MMD_PCS, &i); 467 hw->phy.ops.read_reg(hw, IXGBE_LDPCECL, MDIO_MMD_PCS, &i); 468 hw->phy.ops.read_reg(hw, IXGBE_LDPCECH, MDIO_MMD_PCS, &i); 469 } 470 471 return 0; 472} 473 474/** 475 * ixgbe_read_pba_string_generic - Reads part number string from EEPROM 476 * @hw: pointer to hardware structure 477 * @pba_num: stores the part number string from the EEPROM 478 * @pba_num_size: part number string buffer length 479 * 480 * Reads the part number string from the EEPROM. 481 **/ 482s32 ixgbe_read_pba_string_generic(struct ixgbe_hw *hw, u8 *pba_num, 483 u32 pba_num_size) 484{ 485 s32 ret_val; 486 u16 data; 487 u16 pba_ptr; 488 u16 offset; 489 u16 length; 490 491 if (pba_num == NULL) { 492 hw_dbg(hw, "PBA string buffer was null\n"); 493 return IXGBE_ERR_INVALID_ARGUMENT; 494 } 495 496 ret_val = hw->eeprom.ops.read(hw, IXGBE_PBANUM0_PTR, &data); 497 if (ret_val) { 498 hw_dbg(hw, "NVM Read Error\n"); 499 return ret_val; 500 } 501 502 ret_val = hw->eeprom.ops.read(hw, IXGBE_PBANUM1_PTR, &pba_ptr); 503 if (ret_val) { 504 hw_dbg(hw, "NVM Read Error\n"); 505 return ret_val; 506 } 507 508 /* 509 * if data is not ptr guard the PBA must be in legacy format which 510 * means pba_ptr is actually our second data word for the PBA number 511 * and we can decode it into an ascii string 512 */ 513 if (data != IXGBE_PBANUM_PTR_GUARD) { 514 hw_dbg(hw, "NVM PBA number is not stored as string\n"); 515 516 /* we will need 11 characters to store the PBA */ 517 if (pba_num_size < 11) { 518 hw_dbg(hw, "PBA string buffer too small\n"); 519 return IXGBE_ERR_NO_SPACE; 520 } 521 522 /* extract hex string from data and pba_ptr */ 523 pba_num[0] = (data >> 12) & 0xF; 524 pba_num[1] = (data >> 8) & 0xF; 525 pba_num[2] = (data >> 4) & 0xF; 526 pba_num[3] = data & 0xF; 527 pba_num[4] = (pba_ptr >> 12) & 0xF; 528 pba_num[5] = (pba_ptr >> 8) & 0xF; 529 pba_num[6] = '-'; 530 pba_num[7] = 0; 531 pba_num[8] = (pba_ptr >> 4) & 0xF; 532 pba_num[9] = pba_ptr & 0xF; 533 534 /* put a null character on the end of our string */ 535 pba_num[10] = '\0'; 536 537 /* switch all the data but the '-' to hex char */ 538 for (offset = 0; offset < 10; offset++) { 539 if (pba_num[offset] < 0xA) 540 pba_num[offset] += '0'; 541 else if (pba_num[offset] < 0x10) 542 pba_num[offset] += 'A' - 0xA; 543 } 544 545 return 0; 546 } 547 548 ret_val = hw->eeprom.ops.read(hw, pba_ptr, &length); 549 if (ret_val) { 550 hw_dbg(hw, "NVM Read Error\n"); 551 return ret_val; 552 } 553 554 if (length == 0xFFFF || length == 0) { 555 hw_dbg(hw, "NVM PBA number section invalid length\n"); 556 return IXGBE_ERR_PBA_SECTION; 557 } 558 559 /* check if pba_num buffer is big enough */ 560 if (pba_num_size < (((u32)length * 2) - 1)) { 561 hw_dbg(hw, "PBA string buffer too small\n"); 562 return IXGBE_ERR_NO_SPACE; 563 } 564 565 /* trim pba length from start of string */ 566 pba_ptr++; 567 length--; 568 569 for (offset = 0; offset < length; offset++) { 570 ret_val = hw->eeprom.ops.read(hw, pba_ptr + offset, &data); 571 if (ret_val) { 572 hw_dbg(hw, "NVM Read Error\n"); 573 return ret_val; 574 } 575 pba_num[offset * 2] = (u8)(data >> 8); 576 pba_num[(offset * 2) + 1] = (u8)(data & 0xFF); 577 } 578 pba_num[offset * 2] = '\0'; 579 580 return 0; 581} 582 583/** 584 * ixgbe_get_mac_addr_generic - Generic get MAC address 585 * @hw: pointer to hardware structure 586 * @mac_addr: Adapter MAC address 587 * 588 * Reads the adapter's MAC address from first Receive Address Register (RAR0) 589 * A reset of the adapter must be performed prior to calling this function 590 * in order for the MAC address to have been loaded from the EEPROM into RAR0 591 **/ 592s32 ixgbe_get_mac_addr_generic(struct ixgbe_hw *hw, u8 *mac_addr) 593{ 594 u32 rar_high; 595 u32 rar_low; 596 u16 i; 597 598 rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(0)); 599 rar_low = IXGBE_READ_REG(hw, IXGBE_RAL(0)); 600 601 for (i = 0; i < 4; i++) 602 mac_addr[i] = (u8)(rar_low >> (i*8)); 603 604 for (i = 0; i < 2; i++) 605 mac_addr[i+4] = (u8)(rar_high >> (i*8)); 606 607 return 0; 608} 609 610enum ixgbe_bus_width ixgbe_convert_bus_width(u16 link_status) 611{ 612 switch (link_status & IXGBE_PCI_LINK_WIDTH) { 613 case IXGBE_PCI_LINK_WIDTH_1: 614 return ixgbe_bus_width_pcie_x1; 615 case IXGBE_PCI_LINK_WIDTH_2: 616 return ixgbe_bus_width_pcie_x2; 617 case IXGBE_PCI_LINK_WIDTH_4: 618 return ixgbe_bus_width_pcie_x4; 619 case IXGBE_PCI_LINK_WIDTH_8: 620 return ixgbe_bus_width_pcie_x8; 621 default: 622 return ixgbe_bus_width_unknown; 623 } 624} 625 626enum ixgbe_bus_speed ixgbe_convert_bus_speed(u16 link_status) 627{ 628 switch (link_status & IXGBE_PCI_LINK_SPEED) { 629 case IXGBE_PCI_LINK_SPEED_2500: 630 return ixgbe_bus_speed_2500; 631 case IXGBE_PCI_LINK_SPEED_5000: 632 return ixgbe_bus_speed_5000; 633 case IXGBE_PCI_LINK_SPEED_8000: 634 return ixgbe_bus_speed_8000; 635 default: 636 return ixgbe_bus_speed_unknown; 637 } 638} 639 640/** 641 * ixgbe_get_bus_info_generic - Generic set PCI bus info 642 * @hw: pointer to hardware structure 643 * 644 * Sets the PCI bus info (speed, width, type) within the ixgbe_hw structure 645 **/ 646s32 ixgbe_get_bus_info_generic(struct ixgbe_hw *hw) 647{ 648 u16 link_status; 649 650 hw->bus.type = ixgbe_bus_type_pci_express; 651 652 /* Get the negotiated link width and speed from PCI config space */ 653 link_status = ixgbe_read_pci_cfg_word(hw, IXGBE_PCI_LINK_STATUS); 654 655 hw->bus.width = ixgbe_convert_bus_width(link_status); 656 hw->bus.speed = ixgbe_convert_bus_speed(link_status); 657 658 hw->mac.ops.set_lan_id(hw); 659 660 return 0; 661} 662 663/** 664 * ixgbe_set_lan_id_multi_port_pcie - Set LAN id for PCIe multiple port devices 665 * @hw: pointer to the HW structure 666 * 667 * Determines the LAN function id by reading memory-mapped registers 668 * and swaps the port value if requested. 669 **/ 670void ixgbe_set_lan_id_multi_port_pcie(struct ixgbe_hw *hw) 671{ 672 struct ixgbe_bus_info *bus = &hw->bus; 673 u32 reg; 674 675 reg = IXGBE_READ_REG(hw, IXGBE_STATUS); 676 bus->func = (reg & IXGBE_STATUS_LAN_ID) >> IXGBE_STATUS_LAN_ID_SHIFT; 677 bus->lan_id = bus->func; 678 679 /* check for a port swap */ 680 reg = IXGBE_READ_REG(hw, IXGBE_FACTPS); 681 if (reg & IXGBE_FACTPS_LFS) 682 bus->func ^= 0x1; 683} 684 685/** 686 * ixgbe_stop_adapter_generic - Generic stop Tx/Rx units 687 * @hw: pointer to hardware structure 688 * 689 * Sets the adapter_stopped flag within ixgbe_hw struct. Clears interrupts, 690 * disables transmit and receive units. The adapter_stopped flag is used by 691 * the shared code and drivers to determine if the adapter is in a stopped 692 * state and should not touch the hardware. 693 **/ 694s32 ixgbe_stop_adapter_generic(struct ixgbe_hw *hw) 695{ 696 u32 reg_val; 697 u16 i; 698 699 /* 700 * Set the adapter_stopped flag so other driver functions stop touching 701 * the hardware 702 */ 703 hw->adapter_stopped = true; 704 705 /* Disable the receive unit */ 706 IXGBE_WRITE_REG(hw, IXGBE_RXCTRL, 0); 707 708 /* Clear interrupt mask to stop interrupts from being generated */ 709 IXGBE_WRITE_REG(hw, IXGBE_EIMC, IXGBE_IRQ_CLEAR_MASK); 710 711 /* Clear any pending interrupts, flush previous writes */ 712 IXGBE_READ_REG(hw, IXGBE_EICR); 713 714 /* Disable the transmit unit. Each queue must be disabled. */ 715 for (i = 0; i < hw->mac.max_tx_queues; i++) 716 IXGBE_WRITE_REG(hw, IXGBE_TXDCTL(i), IXGBE_TXDCTL_SWFLSH); 717 718 /* Disable the receive unit by stopping each queue */ 719 for (i = 0; i < hw->mac.max_rx_queues; i++) { 720 reg_val = IXGBE_READ_REG(hw, IXGBE_RXDCTL(i)); 721 reg_val &= ~IXGBE_RXDCTL_ENABLE; 722 reg_val |= IXGBE_RXDCTL_SWFLSH; 723 IXGBE_WRITE_REG(hw, IXGBE_RXDCTL(i), reg_val); 724 } 725 726 /* flush all queues disables */ 727 IXGBE_WRITE_FLUSH(hw); 728 usleep_range(1000, 2000); 729 730 /* 731 * Prevent the PCI-E bus from from hanging by disabling PCI-E master 732 * access and verify no pending requests 733 */ 734 return ixgbe_disable_pcie_master(hw); 735} 736 737/** 738 * ixgbe_led_on_generic - Turns on the software controllable LEDs. 739 * @hw: pointer to hardware structure 740 * @index: led number to turn on 741 **/ 742s32 ixgbe_led_on_generic(struct ixgbe_hw *hw, u32 index) 743{ 744 u32 led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL); 745 746 /* To turn on the LED, set mode to ON. */ 747 led_reg &= ~IXGBE_LED_MODE_MASK(index); 748 led_reg |= IXGBE_LED_ON << IXGBE_LED_MODE_SHIFT(index); 749 IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, led_reg); 750 IXGBE_WRITE_FLUSH(hw); 751 752 return 0; 753} 754 755/** 756 * ixgbe_led_off_generic - Turns off the software controllable LEDs. 757 * @hw: pointer to hardware structure 758 * @index: led number to turn off 759 **/ 760s32 ixgbe_led_off_generic(struct ixgbe_hw *hw, u32 index) 761{ 762 u32 led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL); 763 764 /* To turn off the LED, set mode to OFF. */ 765 led_reg &= ~IXGBE_LED_MODE_MASK(index); 766 led_reg |= IXGBE_LED_OFF << IXGBE_LED_MODE_SHIFT(index); 767 IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, led_reg); 768 IXGBE_WRITE_FLUSH(hw); 769 770 return 0; 771} 772 773/** 774 * ixgbe_init_eeprom_params_generic - Initialize EEPROM params 775 * @hw: pointer to hardware structure 776 * 777 * Initializes the EEPROM parameters ixgbe_eeprom_info within the 778 * ixgbe_hw struct in order to set up EEPROM access. 779 **/ 780s32 ixgbe_init_eeprom_params_generic(struct ixgbe_hw *hw) 781{ 782 struct ixgbe_eeprom_info *eeprom = &hw->eeprom; 783 u32 eec; 784 u16 eeprom_size; 785 786 if (eeprom->type == ixgbe_eeprom_uninitialized) { 787 eeprom->type = ixgbe_eeprom_none; 788 /* Set default semaphore delay to 10ms which is a well 789 * tested value */ 790 eeprom->semaphore_delay = 10; 791 /* Clear EEPROM page size, it will be initialized as needed */ 792 eeprom->word_page_size = 0; 793 794 /* 795 * Check for EEPROM present first. 796 * If not present leave as none 797 */ 798 eec = IXGBE_READ_REG(hw, IXGBE_EEC); 799 if (eec & IXGBE_EEC_PRES) { 800 eeprom->type = ixgbe_eeprom_spi; 801 802 /* 803 * SPI EEPROM is assumed here. This code would need to 804 * change if a future EEPROM is not SPI. 805 */ 806 eeprom_size = (u16)((eec & IXGBE_EEC_SIZE) >> 807 IXGBE_EEC_SIZE_SHIFT); 808 eeprom->word_size = 1 << (eeprom_size + 809 IXGBE_EEPROM_WORD_SIZE_SHIFT); 810 } 811 812 if (eec & IXGBE_EEC_ADDR_SIZE) 813 eeprom->address_bits = 16; 814 else 815 eeprom->address_bits = 8; 816 hw_dbg(hw, "Eeprom params: type = %d, size = %d, address bits: %d\n", 817 eeprom->type, eeprom->word_size, eeprom->address_bits); 818 } 819 820 return 0; 821} 822 823/** 824 * ixgbe_write_eeprom_buffer_bit_bang_generic - Write EEPROM using bit-bang 825 * @hw: pointer to hardware structure 826 * @offset: offset within the EEPROM to write 827 * @words: number of words 828 * @data: 16 bit word(s) to write to EEPROM 829 * 830 * Reads 16 bit word(s) from EEPROM through bit-bang method 831 **/ 832s32 ixgbe_write_eeprom_buffer_bit_bang_generic(struct ixgbe_hw *hw, u16 offset, 833 u16 words, u16 *data) 834{ 835 s32 status; 836 u16 i, count; 837 838 hw->eeprom.ops.init_params(hw); 839 840 if (words == 0) 841 return IXGBE_ERR_INVALID_ARGUMENT; 842 843 if (offset + words > hw->eeprom.word_size) 844 return IXGBE_ERR_EEPROM; 845 846 /* 847 * The EEPROM page size cannot be queried from the chip. We do lazy 848 * initialization. It is worth to do that when we write large buffer. 849 */ 850 if ((hw->eeprom.word_page_size == 0) && 851 (words > IXGBE_EEPROM_PAGE_SIZE_MAX)) 852 ixgbe_detect_eeprom_page_size_generic(hw, offset); 853 854 /* 855 * We cannot hold synchronization semaphores for too long 856 * to avoid other entity starvation. However it is more efficient 857 * to read in bursts than synchronizing access for each word. 858 */ 859 for (i = 0; i < words; i += IXGBE_EEPROM_RD_BUFFER_MAX_COUNT) { 860 count = (words - i) / IXGBE_EEPROM_RD_BUFFER_MAX_COUNT > 0 ? 861 IXGBE_EEPROM_RD_BUFFER_MAX_COUNT : (words - i); 862 status = ixgbe_write_eeprom_buffer_bit_bang(hw, offset + i, 863 count, &data[i]); 864 865 if (status != 0) 866 break; 867 } 868 869 return status; 870} 871 872/** 873 * ixgbe_write_eeprom_buffer_bit_bang - Writes 16 bit word(s) to EEPROM 874 * @hw: pointer to hardware structure 875 * @offset: offset within the EEPROM to be written to 876 * @words: number of word(s) 877 * @data: 16 bit word(s) to be written to the EEPROM 878 * 879 * If ixgbe_eeprom_update_checksum is not called after this function, the 880 * EEPROM will most likely contain an invalid checksum. 881 **/ 882static s32 ixgbe_write_eeprom_buffer_bit_bang(struct ixgbe_hw *hw, u16 offset, 883 u16 words, u16 *data) 884{ 885 s32 status; 886 u16 word; 887 u16 page_size; 888 u16 i; 889 u8 write_opcode = IXGBE_EEPROM_WRITE_OPCODE_SPI; 890 891 /* Prepare the EEPROM for writing */ 892 status = ixgbe_acquire_eeprom(hw); 893 if (status) 894 return status; 895 896 if (ixgbe_ready_eeprom(hw) != 0) { 897 ixgbe_release_eeprom(hw); 898 return IXGBE_ERR_EEPROM; 899 } 900 901 for (i = 0; i < words; i++) { 902 ixgbe_standby_eeprom(hw); 903 904 /* Send the WRITE ENABLE command (8 bit opcode) */ 905 ixgbe_shift_out_eeprom_bits(hw, 906 IXGBE_EEPROM_WREN_OPCODE_SPI, 907 IXGBE_EEPROM_OPCODE_BITS); 908 909 ixgbe_standby_eeprom(hw); 910 911 /* Some SPI eeproms use the 8th address bit embedded 912 * in the opcode 913 */ 914 if ((hw->eeprom.address_bits == 8) && 915 ((offset + i) >= 128)) 916 write_opcode |= IXGBE_EEPROM_A8_OPCODE_SPI; 917 918 /* Send the Write command (8-bit opcode + addr) */ 919 ixgbe_shift_out_eeprom_bits(hw, write_opcode, 920 IXGBE_EEPROM_OPCODE_BITS); 921 ixgbe_shift_out_eeprom_bits(hw, (u16)((offset + i) * 2), 922 hw->eeprom.address_bits); 923 924 page_size = hw->eeprom.word_page_size; 925 926 /* Send the data in burst via SPI */ 927 do { 928 word = data[i]; 929 word = (word >> 8) | (word << 8); 930 ixgbe_shift_out_eeprom_bits(hw, word, 16); 931 932 if (page_size == 0) 933 break; 934 935 /* do not wrap around page */ 936 if (((offset + i) & (page_size - 1)) == 937 (page_size - 1)) 938 break; 939 } while (++i < words); 940 941 ixgbe_standby_eeprom(hw); 942 usleep_range(10000, 20000); 943 } 944 /* Done with writing - release the EEPROM */ 945 ixgbe_release_eeprom(hw); 946 947 return 0; 948} 949 950/** 951 * ixgbe_write_eeprom_generic - Writes 16 bit value to EEPROM 952 * @hw: pointer to hardware structure 953 * @offset: offset within the EEPROM to be written to 954 * @data: 16 bit word to be written to the EEPROM 955 * 956 * If ixgbe_eeprom_update_checksum is not called after this function, the 957 * EEPROM will most likely contain an invalid checksum. 958 **/ 959s32 ixgbe_write_eeprom_generic(struct ixgbe_hw *hw, u16 offset, u16 data) 960{ 961 hw->eeprom.ops.init_params(hw); 962 963 if (offset >= hw->eeprom.word_size) 964 return IXGBE_ERR_EEPROM; 965 966 return ixgbe_write_eeprom_buffer_bit_bang(hw, offset, 1, &data); 967} 968 969/** 970 * ixgbe_read_eeprom_buffer_bit_bang_generic - Read EEPROM using bit-bang 971 * @hw: pointer to hardware structure 972 * @offset: offset within the EEPROM to be read 973 * @words: number of word(s) 974 * @data: read 16 bit words(s) from EEPROM 975 * 976 * Reads 16 bit word(s) from EEPROM through bit-bang method 977 **/ 978s32 ixgbe_read_eeprom_buffer_bit_bang_generic(struct ixgbe_hw *hw, u16 offset, 979 u16 words, u16 *data) 980{ 981 s32 status; 982 u16 i, count; 983 984 hw->eeprom.ops.init_params(hw); 985 986 if (words == 0) 987 return IXGBE_ERR_INVALID_ARGUMENT; 988 989 if (offset + words > hw->eeprom.word_size) 990 return IXGBE_ERR_EEPROM; 991 992 /* 993 * We cannot hold synchronization semaphores for too long 994 * to avoid other entity starvation. However it is more efficient 995 * to read in bursts than synchronizing access for each word. 996 */ 997 for (i = 0; i < words; i += IXGBE_EEPROM_RD_BUFFER_MAX_COUNT) { 998 count = (words - i) / IXGBE_EEPROM_RD_BUFFER_MAX_COUNT > 0 ? 999 IXGBE_EEPROM_RD_BUFFER_MAX_COUNT : (words - i); 1000 1001 status = ixgbe_read_eeprom_buffer_bit_bang(hw, offset + i, 1002 count, &data[i]); 1003 1004 if (status) 1005 return status; 1006 } 1007 1008 return 0; 1009} 1010 1011/** 1012 * ixgbe_read_eeprom_buffer_bit_bang - Read EEPROM using bit-bang 1013 * @hw: pointer to hardware structure 1014 * @offset: offset within the EEPROM to be read 1015 * @words: number of word(s) 1016 * @data: read 16 bit word(s) from EEPROM 1017 * 1018 * Reads 16 bit word(s) from EEPROM through bit-bang method 1019 **/ 1020static s32 ixgbe_read_eeprom_buffer_bit_bang(struct ixgbe_hw *hw, u16 offset, 1021 u16 words, u16 *data) 1022{ 1023 s32 status; 1024 u16 word_in; 1025 u8 read_opcode = IXGBE_EEPROM_READ_OPCODE_SPI; 1026 u16 i; 1027 1028 /* Prepare the EEPROM for reading */ 1029 status = ixgbe_acquire_eeprom(hw); 1030 if (status) 1031 return status; 1032 1033 if (ixgbe_ready_eeprom(hw) != 0) { 1034 ixgbe_release_eeprom(hw); 1035 return IXGBE_ERR_EEPROM; 1036 } 1037 1038 for (i = 0; i < words; i++) { 1039 ixgbe_standby_eeprom(hw); 1040 /* Some SPI eeproms use the 8th address bit embedded 1041 * in the opcode 1042 */ 1043 if ((hw->eeprom.address_bits == 8) && 1044 ((offset + i) >= 128)) 1045 read_opcode |= IXGBE_EEPROM_A8_OPCODE_SPI; 1046 1047 /* Send the READ command (opcode + addr) */ 1048 ixgbe_shift_out_eeprom_bits(hw, read_opcode, 1049 IXGBE_EEPROM_OPCODE_BITS); 1050 ixgbe_shift_out_eeprom_bits(hw, (u16)((offset + i) * 2), 1051 hw->eeprom.address_bits); 1052 1053 /* Read the data. */ 1054 word_in = ixgbe_shift_in_eeprom_bits(hw, 16); 1055 data[i] = (word_in >> 8) | (word_in << 8); 1056 } 1057 1058 /* End this read operation */ 1059 ixgbe_release_eeprom(hw); 1060 1061 return 0; 1062} 1063 1064/** 1065 * ixgbe_read_eeprom_bit_bang_generic - Read EEPROM word using bit-bang 1066 * @hw: pointer to hardware structure 1067 * @offset: offset within the EEPROM to be read 1068 * @data: read 16 bit value from EEPROM 1069 * 1070 * Reads 16 bit value from EEPROM through bit-bang method 1071 **/ 1072s32 ixgbe_read_eeprom_bit_bang_generic(struct ixgbe_hw *hw, u16 offset, 1073 u16 *data) 1074{ 1075 hw->eeprom.ops.init_params(hw); 1076 1077 if (offset >= hw->eeprom.word_size) 1078 return IXGBE_ERR_EEPROM; 1079 1080 return ixgbe_read_eeprom_buffer_bit_bang(hw, offset, 1, data); 1081} 1082 1083/** 1084 * ixgbe_read_eerd_buffer_generic - Read EEPROM word(s) using EERD 1085 * @hw: pointer to hardware structure 1086 * @offset: offset of word in the EEPROM to read 1087 * @words: number of word(s) 1088 * @data: 16 bit word(s) from the EEPROM 1089 * 1090 * Reads a 16 bit word(s) from the EEPROM using the EERD register. 1091 **/ 1092s32 ixgbe_read_eerd_buffer_generic(struct ixgbe_hw *hw, u16 offset, 1093 u16 words, u16 *data) 1094{ 1095 u32 eerd; 1096 s32 status; 1097 u32 i; 1098 1099 hw->eeprom.ops.init_params(hw); 1100 1101 if (words == 0) 1102 return IXGBE_ERR_INVALID_ARGUMENT; 1103 1104 if (offset >= hw->eeprom.word_size) 1105 return IXGBE_ERR_EEPROM; 1106 1107 for (i = 0; i < words; i++) { 1108 eerd = ((offset + i) << IXGBE_EEPROM_RW_ADDR_SHIFT) | 1109 IXGBE_EEPROM_RW_REG_START; 1110 1111 IXGBE_WRITE_REG(hw, IXGBE_EERD, eerd); 1112 status = ixgbe_poll_eerd_eewr_done(hw, IXGBE_NVM_POLL_READ); 1113 1114 if (status == 0) { 1115 data[i] = (IXGBE_READ_REG(hw, IXGBE_EERD) >> 1116 IXGBE_EEPROM_RW_REG_DATA); 1117 } else { 1118 hw_dbg(hw, "Eeprom read timed out\n"); 1119 return status; 1120 } 1121 } 1122 1123 return 0; 1124} 1125 1126/** 1127 * ixgbe_detect_eeprom_page_size_generic - Detect EEPROM page size 1128 * @hw: pointer to hardware structure 1129 * @offset: offset within the EEPROM to be used as a scratch pad 1130 * 1131 * Discover EEPROM page size by writing marching data at given offset. 1132 * This function is called only when we are writing a new large buffer 1133 * at given offset so the data would be overwritten anyway. 1134 **/ 1135static s32 ixgbe_detect_eeprom_page_size_generic(struct ixgbe_hw *hw, 1136 u16 offset) 1137{ 1138 u16 data[IXGBE_EEPROM_PAGE_SIZE_MAX]; 1139 s32 status; 1140 u16 i; 1141 1142 for (i = 0; i < IXGBE_EEPROM_PAGE_SIZE_MAX; i++) 1143 data[i] = i; 1144 1145 hw->eeprom.word_page_size = IXGBE_EEPROM_PAGE_SIZE_MAX; 1146 status = ixgbe_write_eeprom_buffer_bit_bang(hw, offset, 1147 IXGBE_EEPROM_PAGE_SIZE_MAX, data); 1148 hw->eeprom.word_page_size = 0; 1149 if (status) 1150 return status; 1151 1152 status = ixgbe_read_eeprom_buffer_bit_bang(hw, offset, 1, data); 1153 if (status) 1154 return status; 1155 1156 /* 1157 * When writing in burst more than the actual page size 1158 * EEPROM address wraps around current page. 1159 */ 1160 hw->eeprom.word_page_size = IXGBE_EEPROM_PAGE_SIZE_MAX - data[0]; 1161 1162 hw_dbg(hw, "Detected EEPROM page size = %d words.\n", 1163 hw->eeprom.word_page_size); 1164 return 0; 1165} 1166 1167/** 1168 * ixgbe_read_eerd_generic - Read EEPROM word using EERD 1169 * @hw: pointer to hardware structure 1170 * @offset: offset of word in the EEPROM to read 1171 * @data: word read from the EEPROM 1172 * 1173 * Reads a 16 bit word from the EEPROM using the EERD register. 1174 **/ 1175s32 ixgbe_read_eerd_generic(struct ixgbe_hw *hw, u16 offset, u16 *data) 1176{ 1177 return ixgbe_read_eerd_buffer_generic(hw, offset, 1, data); 1178} 1179 1180/** 1181 * ixgbe_write_eewr_buffer_generic - Write EEPROM word(s) using EEWR 1182 * @hw: pointer to hardware structure 1183 * @offset: offset of word in the EEPROM to write 1184 * @words: number of words 1185 * @data: word(s) write to the EEPROM 1186 * 1187 * Write a 16 bit word(s) to the EEPROM using the EEWR register. 1188 **/ 1189s32 ixgbe_write_eewr_buffer_generic(struct ixgbe_hw *hw, u16 offset, 1190 u16 words, u16 *data) 1191{ 1192 u32 eewr; 1193 s32 status; 1194 u16 i; 1195 1196 hw->eeprom.ops.init_params(hw); 1197 1198 if (words == 0) 1199 return IXGBE_ERR_INVALID_ARGUMENT; 1200 1201 if (offset >= hw->eeprom.word_size) 1202 return IXGBE_ERR_EEPROM; 1203 1204 for (i = 0; i < words; i++) { 1205 eewr = ((offset + i) << IXGBE_EEPROM_RW_ADDR_SHIFT) | 1206 (data[i] << IXGBE_EEPROM_RW_REG_DATA) | 1207 IXGBE_EEPROM_RW_REG_START; 1208 1209 status = ixgbe_poll_eerd_eewr_done(hw, IXGBE_NVM_POLL_WRITE); 1210 if (status) { 1211 hw_dbg(hw, "Eeprom write EEWR timed out\n"); 1212 return status; 1213 } 1214 1215 IXGBE_WRITE_REG(hw, IXGBE_EEWR, eewr); 1216 1217 status = ixgbe_poll_eerd_eewr_done(hw, IXGBE_NVM_POLL_WRITE); 1218 if (status) { 1219 hw_dbg(hw, "Eeprom write EEWR timed out\n"); 1220 return status; 1221 } 1222 } 1223 1224 return 0; 1225} 1226 1227/** 1228 * ixgbe_write_eewr_generic - Write EEPROM word using EEWR 1229 * @hw: pointer to hardware structure 1230 * @offset: offset of word in the EEPROM to write 1231 * @data: word write to the EEPROM 1232 * 1233 * Write a 16 bit word to the EEPROM using the EEWR register. 1234 **/ 1235s32 ixgbe_write_eewr_generic(struct ixgbe_hw *hw, u16 offset, u16 data) 1236{ 1237 return ixgbe_write_eewr_buffer_generic(hw, offset, 1, &data); 1238} 1239 1240/** 1241 * ixgbe_poll_eerd_eewr_done - Poll EERD read or EEWR write status 1242 * @hw: pointer to hardware structure 1243 * @ee_reg: EEPROM flag for polling 1244 * 1245 * Polls the status bit (bit 1) of the EERD or EEWR to determine when the 1246 * read or write is done respectively. 1247 **/ 1248static s32 ixgbe_poll_eerd_eewr_done(struct ixgbe_hw *hw, u32 ee_reg) 1249{ 1250 u32 i; 1251 u32 reg; 1252 1253 for (i = 0; i < IXGBE_EERD_EEWR_ATTEMPTS; i++) { 1254 if (ee_reg == IXGBE_NVM_POLL_READ) 1255 reg = IXGBE_READ_REG(hw, IXGBE_EERD); 1256 else 1257 reg = IXGBE_READ_REG(hw, IXGBE_EEWR); 1258 1259 if (reg & IXGBE_EEPROM_RW_REG_DONE) { 1260 return 0; 1261 } 1262 udelay(5); 1263 } 1264 return IXGBE_ERR_EEPROM; 1265} 1266 1267/** 1268 * ixgbe_acquire_eeprom - Acquire EEPROM using bit-bang 1269 * @hw: pointer to hardware structure 1270 * 1271 * Prepares EEPROM for access using bit-bang method. This function should 1272 * be called before issuing a command to the EEPROM. 1273 **/ 1274static s32 ixgbe_acquire_eeprom(struct ixgbe_hw *hw) 1275{ 1276 u32 eec; 1277 u32 i; 1278 1279 if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) != 0) 1280 return IXGBE_ERR_SWFW_SYNC; 1281 1282 eec = IXGBE_READ_REG(hw, IXGBE_EEC); 1283 1284 /* Request EEPROM Access */ 1285 eec |= IXGBE_EEC_REQ; 1286 IXGBE_WRITE_REG(hw, IXGBE_EEC, eec); 1287 1288 for (i = 0; i < IXGBE_EEPROM_GRANT_ATTEMPTS; i++) { 1289 eec = IXGBE_READ_REG(hw, IXGBE_EEC); 1290 if (eec & IXGBE_EEC_GNT) 1291 break; 1292 udelay(5); 1293 } 1294 1295 /* Release if grant not acquired */ 1296 if (!(eec & IXGBE_EEC_GNT)) { 1297 eec &= ~IXGBE_EEC_REQ; 1298 IXGBE_WRITE_REG(hw, IXGBE_EEC, eec); 1299 hw_dbg(hw, "Could not acquire EEPROM grant\n"); 1300 1301 hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM); 1302 return IXGBE_ERR_EEPROM; 1303 } 1304 1305 /* Setup EEPROM for Read/Write */ 1306 /* Clear CS and SK */ 1307 eec &= ~(IXGBE_EEC_CS | IXGBE_EEC_SK); 1308 IXGBE_WRITE_REG(hw, IXGBE_EEC, eec); 1309 IXGBE_WRITE_FLUSH(hw); 1310 udelay(1); 1311 return 0; 1312} 1313 1314/** 1315 * ixgbe_get_eeprom_semaphore - Get hardware semaphore 1316 * @hw: pointer to hardware structure 1317 * 1318 * Sets the hardware semaphores so EEPROM access can occur for bit-bang method 1319 **/ 1320static s32 ixgbe_get_eeprom_semaphore(struct ixgbe_hw *hw) 1321{ 1322 u32 timeout = 2000; 1323 u32 i; 1324 u32 swsm; 1325 1326 /* Get SMBI software semaphore between device drivers first */ 1327 for (i = 0; i < timeout; i++) { 1328 /* 1329 * If the SMBI bit is 0 when we read it, then the bit will be 1330 * set and we have the semaphore 1331 */ 1332 swsm = IXGBE_READ_REG(hw, IXGBE_SWSM); 1333 if (!(swsm & IXGBE_SWSM_SMBI)) 1334 break; 1335 usleep_range(50, 100); 1336 } 1337 1338 if (i == timeout) { 1339 hw_dbg(hw, "Driver can't access the Eeprom - SMBI Semaphore not granted.\n"); 1340 /* this release is particularly important because our attempts 1341 * above to get the semaphore may have succeeded, and if there 1342 * was a timeout, we should unconditionally clear the semaphore 1343 * bits to free the driver to make progress 1344 */ 1345 ixgbe_release_eeprom_semaphore(hw); 1346 1347 usleep_range(50, 100); 1348 /* one last try 1349 * If the SMBI bit is 0 when we read it, then the bit will be 1350 * set and we have the semaphore 1351 */ 1352 swsm = IXGBE_READ_REG(hw, IXGBE_SWSM); 1353 if (swsm & IXGBE_SWSM_SMBI) { 1354 hw_dbg(hw, "Software semaphore SMBI between device drivers not granted.\n"); 1355 return IXGBE_ERR_EEPROM; 1356 } 1357 } 1358 1359 /* Now get the semaphore between SW/FW through the SWESMBI bit */ 1360 for (i = 0; i < timeout; i++) { 1361 swsm = IXGBE_READ_REG(hw, IXGBE_SWSM); 1362 1363 /* Set the SW EEPROM semaphore bit to request access */ 1364 swsm |= IXGBE_SWSM_SWESMBI; 1365 IXGBE_WRITE_REG(hw, IXGBE_SWSM, swsm); 1366 1367 /* If we set the bit successfully then we got the 1368 * semaphore. 1369 */ 1370 swsm = IXGBE_READ_REG(hw, IXGBE_SWSM); 1371 if (swsm & IXGBE_SWSM_SWESMBI) 1372 break; 1373 1374 usleep_range(50, 100); 1375 } 1376 1377 /* Release semaphores and return error if SW EEPROM semaphore 1378 * was not granted because we don't have access to the EEPROM 1379 */ 1380 if (i >= timeout) { 1381 hw_dbg(hw, "SWESMBI Software EEPROM semaphore not granted.\n"); 1382 ixgbe_release_eeprom_semaphore(hw); 1383 return IXGBE_ERR_EEPROM; 1384 } 1385 1386 return 0; 1387} 1388 1389/** 1390 * ixgbe_release_eeprom_semaphore - Release hardware semaphore 1391 * @hw: pointer to hardware structure 1392 * 1393 * This function clears hardware semaphore bits. 1394 **/ 1395static void ixgbe_release_eeprom_semaphore(struct ixgbe_hw *hw) 1396{ 1397 u32 swsm; 1398 1399 swsm = IXGBE_READ_REG(hw, IXGBE_SWSM); 1400 1401 /* Release both semaphores by writing 0 to the bits SWESMBI and SMBI */ 1402 swsm &= ~(IXGBE_SWSM_SWESMBI | IXGBE_SWSM_SMBI); 1403 IXGBE_WRITE_REG(hw, IXGBE_SWSM, swsm); 1404 IXGBE_WRITE_FLUSH(hw); 1405} 1406 1407/** 1408 * ixgbe_ready_eeprom - Polls for EEPROM ready 1409 * @hw: pointer to hardware structure 1410 **/ 1411static s32 ixgbe_ready_eeprom(struct ixgbe_hw *hw) 1412{ 1413 u16 i; 1414 u8 spi_stat_reg; 1415 1416 /* 1417 * Read "Status Register" repeatedly until the LSB is cleared. The 1418 * EEPROM will signal that the command has been completed by clearing 1419 * bit 0 of the internal status register. If it's not cleared within 1420 * 5 milliseconds, then error out. 1421 */ 1422 for (i = 0; i < IXGBE_EEPROM_MAX_RETRY_SPI; i += 5) { 1423 ixgbe_shift_out_eeprom_bits(hw, IXGBE_EEPROM_RDSR_OPCODE_SPI, 1424 IXGBE_EEPROM_OPCODE_BITS); 1425 spi_stat_reg = (u8)ixgbe_shift_in_eeprom_bits(hw, 8); 1426 if (!(spi_stat_reg & IXGBE_EEPROM_STATUS_RDY_SPI)) 1427 break; 1428 1429 udelay(5); 1430 ixgbe_standby_eeprom(hw); 1431 } 1432 1433 /* 1434 * On some parts, SPI write time could vary from 0-20mSec on 3.3V 1435 * devices (and only 0-5mSec on 5V devices) 1436 */ 1437 if (i >= IXGBE_EEPROM_MAX_RETRY_SPI) { 1438 hw_dbg(hw, "SPI EEPROM Status error\n"); 1439 return IXGBE_ERR_EEPROM; 1440 } 1441 1442 return 0; 1443} 1444 1445/** 1446 * ixgbe_standby_eeprom - Returns EEPROM to a "standby" state 1447 * @hw: pointer to hardware structure 1448 **/ 1449static void ixgbe_standby_eeprom(struct ixgbe_hw *hw) 1450{ 1451 u32 eec; 1452 1453 eec = IXGBE_READ_REG(hw, IXGBE_EEC); 1454 1455 /* Toggle CS to flush commands */ 1456 eec |= IXGBE_EEC_CS; 1457 IXGBE_WRITE_REG(hw, IXGBE_EEC, eec); 1458 IXGBE_WRITE_FLUSH(hw); 1459 udelay(1); 1460 eec &= ~IXGBE_EEC_CS; 1461 IXGBE_WRITE_REG(hw, IXGBE_EEC, eec); 1462 IXGBE_WRITE_FLUSH(hw); 1463 udelay(1); 1464} 1465 1466/** 1467 * ixgbe_shift_out_eeprom_bits - Shift data bits out to the EEPROM. 1468 * @hw: pointer to hardware structure 1469 * @data: data to send to the EEPROM 1470 * @count: number of bits to shift out 1471 **/ 1472static void ixgbe_shift_out_eeprom_bits(struct ixgbe_hw *hw, u16 data, 1473 u16 count) 1474{ 1475 u32 eec; 1476 u32 mask; 1477 u32 i; 1478 1479 eec = IXGBE_READ_REG(hw, IXGBE_EEC); 1480 1481 /* 1482 * Mask is used to shift "count" bits of "data" out to the EEPROM 1483 * one bit at a time. Determine the starting bit based on count 1484 */ 1485 mask = 0x01 << (count - 1); 1486 1487 for (i = 0; i < count; i++) { 1488 /* 1489 * A "1" is shifted out to the EEPROM by setting bit "DI" to a 1490 * "1", and then raising and then lowering the clock (the SK 1491 * bit controls the clock input to the EEPROM). A "0" is 1492 * shifted out to the EEPROM by setting "DI" to "0" and then 1493 * raising and then lowering the clock. 1494 */ 1495 if (data & mask) 1496 eec |= IXGBE_EEC_DI; 1497 else 1498 eec &= ~IXGBE_EEC_DI; 1499 1500 IXGBE_WRITE_REG(hw, IXGBE_EEC, eec); 1501 IXGBE_WRITE_FLUSH(hw); 1502 1503 udelay(1); 1504 1505 ixgbe_raise_eeprom_clk(hw, &eec); 1506 ixgbe_lower_eeprom_clk(hw, &eec); 1507 1508 /* 1509 * Shift mask to signify next bit of data to shift in to the 1510 * EEPROM 1511 */ 1512 mask = mask >> 1; 1513 } 1514 1515 /* We leave the "DI" bit set to "0" when we leave this routine. */ 1516 eec &= ~IXGBE_EEC_DI; 1517 IXGBE_WRITE_REG(hw, IXGBE_EEC, eec); 1518 IXGBE_WRITE_FLUSH(hw); 1519} 1520 1521/** 1522 * ixgbe_shift_in_eeprom_bits - Shift data bits in from the EEPROM 1523 * @hw: pointer to hardware structure 1524 **/ 1525static u16 ixgbe_shift_in_eeprom_bits(struct ixgbe_hw *hw, u16 count) 1526{ 1527 u32 eec; 1528 u32 i; 1529 u16 data = 0; 1530 1531 /* 1532 * In order to read a register from the EEPROM, we need to shift 1533 * 'count' bits in from the EEPROM. Bits are "shifted in" by raising 1534 * the clock input to the EEPROM (setting the SK bit), and then reading 1535 * the value of the "DO" bit. During this "shifting in" process the 1536 * "DI" bit should always be clear. 1537 */ 1538 eec = IXGBE_READ_REG(hw, IXGBE_EEC); 1539 1540 eec &= ~(IXGBE_EEC_DO | IXGBE_EEC_DI); 1541 1542 for (i = 0; i < count; i++) { 1543 data = data << 1; 1544 ixgbe_raise_eeprom_clk(hw, &eec); 1545 1546 eec = IXGBE_READ_REG(hw, IXGBE_EEC); 1547 1548 eec &= ~(IXGBE_EEC_DI); 1549 if (eec & IXGBE_EEC_DO) 1550 data |= 1; 1551 1552 ixgbe_lower_eeprom_clk(hw, &eec); 1553 } 1554 1555 return data; 1556} 1557 1558/** 1559 * ixgbe_raise_eeprom_clk - Raises the EEPROM's clock input. 1560 * @hw: pointer to hardware structure 1561 * @eec: EEC register's current value 1562 **/ 1563static void ixgbe_raise_eeprom_clk(struct ixgbe_hw *hw, u32 *eec) 1564{ 1565 /* 1566 * Raise the clock input to the EEPROM 1567 * (setting the SK bit), then delay 1568 */ 1569 *eec = *eec | IXGBE_EEC_SK; 1570 IXGBE_WRITE_REG(hw, IXGBE_EEC, *eec); 1571 IXGBE_WRITE_FLUSH(hw); 1572 udelay(1); 1573} 1574 1575/** 1576 * ixgbe_lower_eeprom_clk - Lowers the EEPROM's clock input. 1577 * @hw: pointer to hardware structure 1578 * @eecd: EECD's current value 1579 **/ 1580static void ixgbe_lower_eeprom_clk(struct ixgbe_hw *hw, u32 *eec) 1581{ 1582 /* 1583 * Lower the clock input to the EEPROM (clearing the SK bit), then 1584 * delay 1585 */ 1586 *eec = *eec & ~IXGBE_EEC_SK; 1587 IXGBE_WRITE_REG(hw, IXGBE_EEC, *eec); 1588 IXGBE_WRITE_FLUSH(hw); 1589 udelay(1); 1590} 1591 1592/** 1593 * ixgbe_release_eeprom - Release EEPROM, release semaphores 1594 * @hw: pointer to hardware structure 1595 **/ 1596static void ixgbe_release_eeprom(struct ixgbe_hw *hw) 1597{ 1598 u32 eec; 1599 1600 eec = IXGBE_READ_REG(hw, IXGBE_EEC); 1601 1602 eec |= IXGBE_EEC_CS; /* Pull CS high */ 1603 eec &= ~IXGBE_EEC_SK; /* Lower SCK */ 1604 1605 IXGBE_WRITE_REG(hw, IXGBE_EEC, eec); 1606 IXGBE_WRITE_FLUSH(hw); 1607 1608 udelay(1); 1609 1610 /* Stop requesting EEPROM access */ 1611 eec &= ~IXGBE_EEC_REQ; 1612 IXGBE_WRITE_REG(hw, IXGBE_EEC, eec); 1613 1614 hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM); 1615 1616 /* 1617 * Delay before attempt to obtain semaphore again to allow FW 1618 * access. semaphore_delay is in ms we need us for usleep_range 1619 */ 1620 usleep_range(hw->eeprom.semaphore_delay * 1000, 1621 hw->eeprom.semaphore_delay * 2000); 1622} 1623 1624/** 1625 * ixgbe_calc_eeprom_checksum_generic - Calculates and returns the checksum 1626 * @hw: pointer to hardware structure 1627 **/ 1628u16 ixgbe_calc_eeprom_checksum_generic(struct ixgbe_hw *hw) 1629{ 1630 u16 i; 1631 u16 j; 1632 u16 checksum = 0; 1633 u16 length = 0; 1634 u16 pointer = 0; 1635 u16 word = 0; 1636 1637 /* Include 0x0-0x3F in the checksum */ 1638 for (i = 0; i < IXGBE_EEPROM_CHECKSUM; i++) { 1639 if (hw->eeprom.ops.read(hw, i, &word) != 0) { 1640 hw_dbg(hw, "EEPROM read failed\n"); 1641 break; 1642 } 1643 checksum += word; 1644 } 1645 1646 /* Include all data from pointers except for the fw pointer */ 1647 for (i = IXGBE_PCIE_ANALOG_PTR; i < IXGBE_FW_PTR; i++) { 1648 hw->eeprom.ops.read(hw, i, &pointer); 1649 1650 /* Make sure the pointer seems valid */ 1651 if (pointer != 0xFFFF && pointer != 0) { 1652 hw->eeprom.ops.read(hw, pointer, &length); 1653 1654 if (length != 0xFFFF && length != 0) { 1655 for (j = pointer+1; j <= pointer+length; j++) { 1656 hw->eeprom.ops.read(hw, j, &word); 1657 checksum += word; 1658 } 1659 } 1660 } 1661 } 1662 1663 checksum = (u16)IXGBE_EEPROM_SUM - checksum; 1664 1665 return checksum; 1666} 1667 1668/** 1669 * ixgbe_validate_eeprom_checksum_generic - Validate EEPROM checksum 1670 * @hw: pointer to hardware structure 1671 * @checksum_val: calculated checksum 1672 * 1673 * Performs checksum calculation and validates the EEPROM checksum. If the 1674 * caller does not need checksum_val, the value can be NULL. 1675 **/ 1676s32 ixgbe_validate_eeprom_checksum_generic(struct ixgbe_hw *hw, 1677 u16 *checksum_val) 1678{ 1679 s32 status; 1680 u16 checksum; 1681 u16 read_checksum = 0; 1682 1683 /* 1684 * Read the first word from the EEPROM. If this times out or fails, do 1685 * not continue or we could be in for a very long wait while every 1686 * EEPROM read fails 1687 */ 1688 status = hw->eeprom.ops.read(hw, 0, &checksum); 1689 1690 if (status == 0) { 1691 checksum = hw->eeprom.ops.calc_checksum(hw); 1692 1693 hw->eeprom.ops.read(hw, IXGBE_EEPROM_CHECKSUM, &read_checksum); 1694 1695 /* 1696 * Verify read checksum from EEPROM is the same as 1697 * calculated checksum 1698 */ 1699 if (read_checksum != checksum) 1700 status = IXGBE_ERR_EEPROM_CHECKSUM; 1701 1702 /* If the user cares, return the calculated checksum */ 1703 if (checksum_val) 1704 *checksum_val = checksum; 1705 } else { 1706 hw_dbg(hw, "EEPROM read failed\n"); 1707 } 1708 1709 return status; 1710} 1711 1712/** 1713 * ixgbe_update_eeprom_checksum_generic - Updates the EEPROM checksum 1714 * @hw: pointer to hardware structure 1715 **/ 1716s32 ixgbe_update_eeprom_checksum_generic(struct ixgbe_hw *hw) 1717{ 1718 s32 status; 1719 u16 checksum; 1720 1721 /* 1722 * Read the first word from the EEPROM. If this times out or fails, do 1723 * not continue or we could be in for a very long wait while every 1724 * EEPROM read fails 1725 */ 1726 status = hw->eeprom.ops.read(hw, 0, &checksum); 1727 1728 if (status == 0) { 1729 checksum = hw->eeprom.ops.calc_checksum(hw); 1730 status = hw->eeprom.ops.write(hw, IXGBE_EEPROM_CHECKSUM, 1731 checksum); 1732 } else { 1733 hw_dbg(hw, "EEPROM read failed\n"); 1734 } 1735 1736 return status; 1737} 1738 1739/** 1740 * ixgbe_set_rar_generic - Set Rx address register 1741 * @hw: pointer to hardware structure 1742 * @index: Receive address register to write 1743 * @addr: Address to put into receive address register 1744 * @vmdq: VMDq "set" or "pool" index 1745 * @enable_addr: set flag that address is active 1746 * 1747 * Puts an ethernet address into a receive address register. 1748 **/ 1749s32 ixgbe_set_rar_generic(struct ixgbe_hw *hw, u32 index, u8 *addr, u32 vmdq, 1750 u32 enable_addr) 1751{ 1752 u32 rar_low, rar_high; 1753 u32 rar_entries = hw->mac.num_rar_entries; 1754 1755 /* Make sure we are using a valid rar index range */ 1756 if (index >= rar_entries) { 1757 hw_dbg(hw, "RAR index %d is out of range.\n", index); 1758 return IXGBE_ERR_INVALID_ARGUMENT; 1759 } 1760 1761 /* setup VMDq pool selection before this RAR gets enabled */ 1762 hw->mac.ops.set_vmdq(hw, index, vmdq); 1763 1764 /* 1765 * HW expects these in little endian so we reverse the byte 1766 * order from network order (big endian) to little endian 1767 */ 1768 rar_low = ((u32)addr[0] | 1769 ((u32)addr[1] << 8) | 1770 ((u32)addr[2] << 16) | 1771 ((u32)addr[3] << 24)); 1772 /* 1773 * Some parts put the VMDq setting in the extra RAH bits, 1774 * so save everything except the lower 16 bits that hold part 1775 * of the address and the address valid bit. 1776 */ 1777 rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(index)); 1778 rar_high &= ~(0x0000FFFF | IXGBE_RAH_AV); 1779 rar_high |= ((u32)addr[4] | ((u32)addr[5] << 8)); 1780 1781 if (enable_addr != 0) 1782 rar_high |= IXGBE_RAH_AV; 1783 1784 IXGBE_WRITE_REG(hw, IXGBE_RAL(index), rar_low); 1785 IXGBE_WRITE_REG(hw, IXGBE_RAH(index), rar_high); 1786 1787 return 0; 1788} 1789 1790/** 1791 * ixgbe_clear_rar_generic - Remove Rx address register 1792 * @hw: pointer to hardware structure 1793 * @index: Receive address register to write 1794 * 1795 * Clears an ethernet address from a receive address register. 1796 **/ 1797s32 ixgbe_clear_rar_generic(struct ixgbe_hw *hw, u32 index) 1798{ 1799 u32 rar_high; 1800 u32 rar_entries = hw->mac.num_rar_entries; 1801 1802 /* Make sure we are using a valid rar index range */ 1803 if (index >= rar_entries) { 1804 hw_dbg(hw, "RAR index %d is out of range.\n", index); 1805 return IXGBE_ERR_INVALID_ARGUMENT; 1806 } 1807 1808 /* 1809 * Some parts put the VMDq setting in the extra RAH bits, 1810 * so save everything except the lower 16 bits that hold part 1811 * of the address and the address valid bit. 1812 */ 1813 rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(index)); 1814 rar_high &= ~(0x0000FFFF | IXGBE_RAH_AV); 1815 1816 IXGBE_WRITE_REG(hw, IXGBE_RAL(index), 0); 1817 IXGBE_WRITE_REG(hw, IXGBE_RAH(index), rar_high); 1818 1819 /* clear VMDq pool/queue selection for this RAR */ 1820 hw->mac.ops.clear_vmdq(hw, index, IXGBE_CLEAR_VMDQ_ALL); 1821 1822 return 0; 1823} 1824 1825/** 1826 * ixgbe_init_rx_addrs_generic - Initializes receive address filters. 1827 * @hw: pointer to hardware structure 1828 * 1829 * Places the MAC address in receive address register 0 and clears the rest 1830 * of the receive address registers. Clears the multicast table. Assumes 1831 * the receiver is in reset when the routine is called. 1832 **/ 1833s32 ixgbe_init_rx_addrs_generic(struct ixgbe_hw *hw) 1834{ 1835 u32 i; 1836 u32 rar_entries = hw->mac.num_rar_entries; 1837 1838 /* 1839 * If the current mac address is valid, assume it is a software override 1840 * to the permanent address. 1841 * Otherwise, use the permanent address from the eeprom. 1842 */ 1843 if (!is_valid_ether_addr(hw->mac.addr)) { 1844 /* Get the MAC address from the RAR0 for later reference */ 1845 hw->mac.ops.get_mac_addr(hw, hw->mac.addr); 1846 1847 hw_dbg(hw, " Keeping Current RAR0 Addr =%pM\n", hw->mac.addr); 1848 } else { 1849 /* Setup the receive address. */ 1850 hw_dbg(hw, "Overriding MAC Address in RAR[0]\n"); 1851 hw_dbg(hw, " New MAC Addr =%pM\n", hw->mac.addr); 1852 1853 hw->mac.ops.set_rar(hw, 0, hw->mac.addr, 0, IXGBE_RAH_AV); 1854 1855 /* clear VMDq pool/queue selection for RAR 0 */ 1856 hw->mac.ops.clear_vmdq(hw, 0, IXGBE_CLEAR_VMDQ_ALL); 1857 } 1858 hw->addr_ctrl.overflow_promisc = 0; 1859 1860 hw->addr_ctrl.rar_used_count = 1; 1861 1862 /* Zero out the other receive addresses. */ 1863 hw_dbg(hw, "Clearing RAR[1-%d]\n", rar_entries - 1); 1864 for (i = 1; i < rar_entries; i++) { 1865 IXGBE_WRITE_REG(hw, IXGBE_RAL(i), 0); 1866 IXGBE_WRITE_REG(hw, IXGBE_RAH(i), 0); 1867 } 1868 1869 /* Clear the MTA */ 1870 hw->addr_ctrl.mta_in_use = 0; 1871 IXGBE_WRITE_REG(hw, IXGBE_MCSTCTRL, hw->mac.mc_filter_type); 1872 1873 hw_dbg(hw, " Clearing MTA\n"); 1874 for (i = 0; i < hw->mac.mcft_size; i++) 1875 IXGBE_WRITE_REG(hw, IXGBE_MTA(i), 0); 1876 1877 if (hw->mac.ops.init_uta_tables) 1878 hw->mac.ops.init_uta_tables(hw); 1879 1880 return 0; 1881} 1882 1883/** 1884 * ixgbe_mta_vector - Determines bit-vector in multicast table to set 1885 * @hw: pointer to hardware structure 1886 * @mc_addr: the multicast address 1887 * 1888 * Extracts the 12 bits, from a multicast address, to determine which 1889 * bit-vector to set in the multicast table. The hardware uses 12 bits, from 1890 * incoming rx multicast addresses, to determine the bit-vector to check in 1891 * the MTA. Which of the 4 combination, of 12-bits, the hardware uses is set 1892 * by the MO field of the MCSTCTRL. The MO field is set during initialization 1893 * to mc_filter_type. 1894 **/ 1895static s32 ixgbe_mta_vector(struct ixgbe_hw *hw, u8 *mc_addr) 1896{ 1897 u32 vector = 0; 1898 1899 switch (hw->mac.mc_filter_type) { 1900 case 0: /* use bits [47:36] of the address */ 1901 vector = ((mc_addr[4] >> 4) | (((u16)mc_addr[5]) << 4)); 1902 break; 1903 case 1: /* use bits [46:35] of the address */ 1904 vector = ((mc_addr[4] >> 3) | (((u16)mc_addr[5]) << 5)); 1905 break; 1906 case 2: /* use bits [45:34] of the address */ 1907 vector = ((mc_addr[4] >> 2) | (((u16)mc_addr[5]) << 6)); 1908 break; 1909 case 3: /* use bits [43:32] of the address */ 1910 vector = ((mc_addr[4]) | (((u16)mc_addr[5]) << 8)); 1911 break; 1912 default: /* Invalid mc_filter_type */ 1913 hw_dbg(hw, "MC filter type param set incorrectly\n"); 1914 break; 1915 } 1916 1917 /* vector can only be 12-bits or boundary will be exceeded */ 1918 vector &= 0xFFF; 1919 return vector; 1920} 1921 1922/** 1923 * ixgbe_set_mta - Set bit-vector in multicast table 1924 * @hw: pointer to hardware structure 1925 * @hash_value: Multicast address hash value 1926 * 1927 * Sets the bit-vector in the multicast table. 1928 **/ 1929static void ixgbe_set_mta(struct ixgbe_hw *hw, u8 *mc_addr) 1930{ 1931 u32 vector; 1932 u32 vector_bit; 1933 u32 vector_reg; 1934 1935 hw->addr_ctrl.mta_in_use++; 1936 1937 vector = ixgbe_mta_vector(hw, mc_addr); 1938 hw_dbg(hw, " bit-vector = 0x%03X\n", vector); 1939 1940 /* 1941 * The MTA is a register array of 128 32-bit registers. It is treated 1942 * like an array of 4096 bits. We want to set bit 1943 * BitArray[vector_value]. So we figure out what register the bit is 1944 * in, read it, OR in the new bit, then write back the new value. The 1945 * register is determined by the upper 7 bits of the vector value and 1946 * the bit within that register are determined by the lower 5 bits of 1947 * the value. 1948 */ 1949 vector_reg = (vector >> 5) & 0x7F; 1950 vector_bit = vector & 0x1F; 1951 hw->mac.mta_shadow[vector_reg] |= (1 << vector_bit); 1952} 1953 1954/** 1955 * ixgbe_update_mc_addr_list_generic - Updates MAC list of multicast addresses 1956 * @hw: pointer to hardware structure 1957 * @netdev: pointer to net device structure 1958 * 1959 * The given list replaces any existing list. Clears the MC addrs from receive 1960 * address registers and the multicast table. Uses unused receive address 1961 * registers for the first multicast addresses, and hashes the rest into the 1962 * multicast table. 1963 **/ 1964s32 ixgbe_update_mc_addr_list_generic(struct ixgbe_hw *hw, 1965 struct net_device *netdev) 1966{ 1967 struct netdev_hw_addr *ha; 1968 u32 i; 1969 1970 /* 1971 * Set the new number of MC addresses that we are being requested to 1972 * use. 1973 */ 1974 hw->addr_ctrl.num_mc_addrs = netdev_mc_count(netdev); 1975 hw->addr_ctrl.mta_in_use = 0; 1976 1977 /* Clear mta_shadow */ 1978 hw_dbg(hw, " Clearing MTA\n"); 1979 memset(&hw->mac.mta_shadow, 0, sizeof(hw->mac.mta_shadow)); 1980 1981 /* Update mta shadow */ 1982 netdev_for_each_mc_addr(ha, netdev) { 1983 hw_dbg(hw, " Adding the multicast addresses:\n"); 1984 ixgbe_set_mta(hw, ha->addr); 1985 } 1986 1987 /* Enable mta */ 1988 for (i = 0; i < hw->mac.mcft_size; i++) 1989 IXGBE_WRITE_REG_ARRAY(hw, IXGBE_MTA(0), i, 1990 hw->mac.mta_shadow[i]); 1991 1992 if (hw->addr_ctrl.mta_in_use > 0) 1993 IXGBE_WRITE_REG(hw, IXGBE_MCSTCTRL, 1994 IXGBE_MCSTCTRL_MFE | hw->mac.mc_filter_type); 1995 1996 hw_dbg(hw, "ixgbe_update_mc_addr_list_generic Complete\n"); 1997 return 0; 1998} 1999 2000/** 2001 * ixgbe_enable_mc_generic - Enable multicast address in RAR 2002 * @hw: pointer to hardware structure 2003 * 2004 * Enables multicast address in RAR and the use of the multicast hash table. 2005 **/ 2006s32 ixgbe_enable_mc_generic(struct ixgbe_hw *hw) 2007{ 2008 struct ixgbe_addr_filter_info *a = &hw->addr_ctrl; 2009 2010 if (a->mta_in_use > 0) 2011 IXGBE_WRITE_REG(hw, IXGBE_MCSTCTRL, IXGBE_MCSTCTRL_MFE | 2012 hw->mac.mc_filter_type); 2013 2014 return 0; 2015} 2016 2017/** 2018 * ixgbe_disable_mc_generic - Disable multicast address in RAR 2019 * @hw: pointer to hardware structure 2020 * 2021 * Disables multicast address in RAR and the use of the multicast hash table. 2022 **/ 2023s32 ixgbe_disable_mc_generic(struct ixgbe_hw *hw) 2024{ 2025 struct ixgbe_addr_filter_info *a = &hw->addr_ctrl; 2026 2027 if (a->mta_in_use > 0) 2028 IXGBE_WRITE_REG(hw, IXGBE_MCSTCTRL, hw->mac.mc_filter_type); 2029 2030 return 0; 2031} 2032 2033/** 2034 * ixgbe_fc_enable_generic - Enable flow control 2035 * @hw: pointer to hardware structure 2036 * 2037 * Enable flow control according to the current settings. 2038 **/ 2039s32 ixgbe_fc_enable_generic(struct ixgbe_hw *hw) 2040{ 2041 u32 mflcn_reg, fccfg_reg; 2042 u32 reg; 2043 u32 fcrtl, fcrth; 2044 int i; 2045 2046 /* Validate the water mark configuration. */ 2047 if (!hw->fc.pause_time) 2048 return IXGBE_ERR_INVALID_LINK_SETTINGS; 2049 2050 /* Low water mark of zero causes XOFF floods */ 2051 for (i = 0; i < MAX_TRAFFIC_CLASS; i++) { 2052 if ((hw->fc.current_mode & ixgbe_fc_tx_pause) && 2053 hw->fc.high_water[i]) { 2054 if (!hw->fc.low_water[i] || 2055 hw->fc.low_water[i] >= hw->fc.high_water[i]) { 2056 hw_dbg(hw, "Invalid water mark configuration\n"); 2057 return IXGBE_ERR_INVALID_LINK_SETTINGS; 2058 } 2059 } 2060 } 2061 2062 /* Negotiate the fc mode to use */ 2063 ixgbe_fc_autoneg(hw); 2064 2065 /* Disable any previous flow control settings */ 2066 mflcn_reg = IXGBE_READ_REG(hw, IXGBE_MFLCN); 2067 mflcn_reg &= ~(IXGBE_MFLCN_RPFCE_MASK | IXGBE_MFLCN_RFCE); 2068 2069 fccfg_reg = IXGBE_READ_REG(hw, IXGBE_FCCFG); 2070 fccfg_reg &= ~(IXGBE_FCCFG_TFCE_802_3X | IXGBE_FCCFG_TFCE_PRIORITY); 2071 2072 /* 2073 * The possible values of fc.current_mode are: 2074 * 0: Flow control is completely disabled 2075 * 1: Rx flow control is enabled (we can receive pause frames, 2076 * but not send pause frames). 2077 * 2: Tx flow control is enabled (we can send pause frames but 2078 * we do not support receiving pause frames). 2079 * 3: Both Rx and Tx flow control (symmetric) are enabled. 2080 * other: Invalid. 2081 */ 2082 switch (hw->fc.current_mode) { 2083 case ixgbe_fc_none: 2084 /* 2085 * Flow control is disabled by software override or autoneg. 2086 * The code below will actually disable it in the HW. 2087 */ 2088 break; 2089 case ixgbe_fc_rx_pause: 2090 /* 2091 * Rx Flow control is enabled and Tx Flow control is 2092 * disabled by software override. Since there really 2093 * isn't a way to advertise that we are capable of RX 2094 * Pause ONLY, we will advertise that we support both 2095 * symmetric and asymmetric Rx PAUSE. Later, we will 2096 * disable the adapter's ability to send PAUSE frames. 2097 */ 2098 mflcn_reg |= IXGBE_MFLCN_RFCE; 2099 break; 2100 case ixgbe_fc_tx_pause: 2101 /* 2102 * Tx Flow control is enabled, and Rx Flow control is 2103 * disabled by software override. 2104 */ 2105 fccfg_reg |= IXGBE_FCCFG_TFCE_802_3X; 2106 break; 2107 case ixgbe_fc_full: 2108 /* Flow control (both Rx and Tx) is enabled by SW override. */ 2109 mflcn_reg |= IXGBE_MFLCN_RFCE; 2110 fccfg_reg |= IXGBE_FCCFG_TFCE_802_3X; 2111 break; 2112 default: 2113 hw_dbg(hw, "Flow control param set incorrectly\n"); 2114 return IXGBE_ERR_CONFIG; 2115 } 2116 2117 /* Set 802.3x based flow control settings. */ 2118 mflcn_reg |= IXGBE_MFLCN_DPF; 2119 IXGBE_WRITE_REG(hw, IXGBE_MFLCN, mflcn_reg); 2120 IXGBE_WRITE_REG(hw, IXGBE_FCCFG, fccfg_reg); 2121 2122 /* Set up and enable Rx high/low water mark thresholds, enable XON. */ 2123 for (i = 0; i < MAX_TRAFFIC_CLASS; i++) { 2124 if ((hw->fc.current_mode & ixgbe_fc_tx_pause) && 2125 hw->fc.high_water[i]) { 2126 fcrtl = (hw->fc.low_water[i] << 10) | IXGBE_FCRTL_XONE; 2127 IXGBE_WRITE_REG(hw, IXGBE_FCRTL_82599(i), fcrtl); 2128 fcrth = (hw->fc.high_water[i] << 10) | IXGBE_FCRTH_FCEN; 2129 } else { 2130 IXGBE_WRITE_REG(hw, IXGBE_FCRTL_82599(i), 0); 2131 /* 2132 * In order to prevent Tx hangs when the internal Tx 2133 * switch is enabled we must set the high water mark 2134 * to the maximum FCRTH value. This allows the Tx 2135 * switch to function even under heavy Rx workloads. 2136 */ 2137 fcrth = IXGBE_READ_REG(hw, IXGBE_RXPBSIZE(i)) - 32; 2138 } 2139 2140 IXGBE_WRITE_REG(hw, IXGBE_FCRTH_82599(i), fcrth); 2141 } 2142 2143 /* Configure pause time (2 TCs per register) */ 2144 reg = hw->fc.pause_time * 0x00010001; 2145 for (i = 0; i < (MAX_TRAFFIC_CLASS / 2); i++) 2146 IXGBE_WRITE_REG(hw, IXGBE_FCTTV(i), reg); 2147 2148 IXGBE_WRITE_REG(hw, IXGBE_FCRTV, hw->fc.pause_time / 2); 2149 2150 return 0; 2151} 2152 2153/** 2154 * ixgbe_negotiate_fc - Negotiate flow control 2155 * @hw: pointer to hardware structure 2156 * @adv_reg: flow control advertised settings 2157 * @lp_reg: link partner's flow control settings 2158 * @adv_sym: symmetric pause bit in advertisement 2159 * @adv_asm: asymmetric pause bit in advertisement 2160 * @lp_sym: symmetric pause bit in link partner advertisement 2161 * @lp_asm: asymmetric pause bit in link partner advertisement 2162 * 2163 * Find the intersection between advertised settings and link partner's 2164 * advertised settings 2165 **/ 2166static s32 ixgbe_negotiate_fc(struct ixgbe_hw *hw, u32 adv_reg, u32 lp_reg, 2167 u32 adv_sym, u32 adv_asm, u32 lp_sym, u32 lp_asm) 2168{ 2169 if ((!(adv_reg)) || (!(lp_reg))) 2170 return IXGBE_ERR_FC_NOT_NEGOTIATED; 2171 2172 if ((adv_reg & adv_sym) && (lp_reg & lp_sym)) { 2173 /* 2174 * Now we need to check if the user selected Rx ONLY 2175 * of pause frames. In this case, we had to advertise 2176 * FULL flow control because we could not advertise RX 2177 * ONLY. Hence, we must now check to see if we need to 2178 * turn OFF the TRANSMISSION of PAUSE frames. 2179 */ 2180 if (hw->fc.requested_mode == ixgbe_fc_full) { 2181 hw->fc.current_mode = ixgbe_fc_full; 2182 hw_dbg(hw, "Flow Control = FULL.\n"); 2183 } else { 2184 hw->fc.current_mode = ixgbe_fc_rx_pause; 2185 hw_dbg(hw, "Flow Control=RX PAUSE frames only\n"); 2186 } 2187 } else if (!(adv_reg & adv_sym) && (adv_reg & adv_asm) && 2188 (lp_reg & lp_sym) && (lp_reg & lp_asm)) { 2189 hw->fc.current_mode = ixgbe_fc_tx_pause; 2190 hw_dbg(hw, "Flow Control = TX PAUSE frames only.\n"); 2191 } else if ((adv_reg & adv_sym) && (adv_reg & adv_asm) && 2192 !(lp_reg & lp_sym) && (lp_reg & lp_asm)) { 2193 hw->fc.current_mode = ixgbe_fc_rx_pause; 2194 hw_dbg(hw, "Flow Control = RX PAUSE frames only.\n"); 2195 } else { 2196 hw->fc.current_mode = ixgbe_fc_none; 2197 hw_dbg(hw, "Flow Control = NONE.\n"); 2198 } 2199 return 0; 2200} 2201 2202/** 2203 * ixgbe_fc_autoneg_fiber - Enable flow control on 1 gig fiber 2204 * @hw: pointer to hardware structure 2205 * 2206 * Enable flow control according on 1 gig fiber. 2207 **/ 2208static s32 ixgbe_fc_autoneg_fiber(struct ixgbe_hw *hw) 2209{ 2210 u32 pcs_anadv_reg, pcs_lpab_reg, linkstat; 2211 s32 ret_val; 2212 2213 /* 2214 * On multispeed fiber at 1g, bail out if 2215 * - link is up but AN did not complete, or if 2216 * - link is up and AN completed but timed out 2217 */ 2218 2219 linkstat = IXGBE_READ_REG(hw, IXGBE_PCS1GLSTA); 2220 if ((!!(linkstat & IXGBE_PCS1GLSTA_AN_COMPLETE) == 0) || 2221 (!!(linkstat & IXGBE_PCS1GLSTA_AN_TIMED_OUT) == 1)) 2222 return IXGBE_ERR_FC_NOT_NEGOTIATED; 2223 2224 pcs_anadv_reg = IXGBE_READ_REG(hw, IXGBE_PCS1GANA); 2225 pcs_lpab_reg = IXGBE_READ_REG(hw, IXGBE_PCS1GANLP); 2226 2227 ret_val = ixgbe_negotiate_fc(hw, pcs_anadv_reg, 2228 pcs_lpab_reg, IXGBE_PCS1GANA_SYM_PAUSE, 2229 IXGBE_PCS1GANA_ASM_PAUSE, 2230 IXGBE_PCS1GANA_SYM_PAUSE, 2231 IXGBE_PCS1GANA_ASM_PAUSE); 2232 2233 return ret_val; 2234} 2235 2236/** 2237 * ixgbe_fc_autoneg_backplane - Enable flow control IEEE clause 37 2238 * @hw: pointer to hardware structure 2239 * 2240 * Enable flow control according to IEEE clause 37. 2241 **/ 2242static s32 ixgbe_fc_autoneg_backplane(struct ixgbe_hw *hw) 2243{ 2244 u32 links2, anlp1_reg, autoc_reg, links; 2245 s32 ret_val; 2246 2247 /* 2248 * On backplane, bail out if 2249 * - backplane autoneg was not completed, or if 2250 * - we are 82599 and link partner is not AN enabled 2251 */ 2252 links = IXGBE_READ_REG(hw, IXGBE_LINKS); 2253 if ((links & IXGBE_LINKS_KX_AN_COMP) == 0) 2254 return IXGBE_ERR_FC_NOT_NEGOTIATED; 2255 2256 if (hw->mac.type == ixgbe_mac_82599EB) { 2257 links2 = IXGBE_READ_REG(hw, IXGBE_LINKS2); 2258 if ((links2 & IXGBE_LINKS2_AN_SUPPORTED) == 0) 2259 return IXGBE_ERR_FC_NOT_NEGOTIATED; 2260 } 2261 /* 2262 * Read the 10g AN autoc and LP ability registers and resolve 2263 * local flow control settings accordingly 2264 */ 2265 autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC); 2266 anlp1_reg = IXGBE_READ_REG(hw, IXGBE_ANLP1); 2267 2268 ret_val = ixgbe_negotiate_fc(hw, autoc_reg, 2269 anlp1_reg, IXGBE_AUTOC_SYM_PAUSE, IXGBE_AUTOC_ASM_PAUSE, 2270 IXGBE_ANLP1_SYM_PAUSE, IXGBE_ANLP1_ASM_PAUSE); 2271 2272 return ret_val; 2273} 2274 2275/** 2276 * ixgbe_fc_autoneg_copper - Enable flow control IEEE clause 37 2277 * @hw: pointer to hardware structure 2278 * 2279 * Enable flow control according to IEEE clause 37. 2280 **/ 2281static s32 ixgbe_fc_autoneg_copper(struct ixgbe_hw *hw) 2282{ 2283 u16 technology_ability_reg = 0; 2284 u16 lp_technology_ability_reg = 0; 2285 2286 hw->phy.ops.read_reg(hw, MDIO_AN_ADVERTISE, 2287 MDIO_MMD_AN, 2288 &technology_ability_reg); 2289 hw->phy.ops.read_reg(hw, MDIO_AN_LPA, 2290 MDIO_MMD_AN, 2291 &lp_technology_ability_reg); 2292 2293 return ixgbe_negotiate_fc(hw, (u32)technology_ability_reg, 2294 (u32)lp_technology_ability_reg, 2295 IXGBE_TAF_SYM_PAUSE, IXGBE_TAF_ASM_PAUSE, 2296 IXGBE_TAF_SYM_PAUSE, IXGBE_TAF_ASM_PAUSE); 2297} 2298 2299/** 2300 * ixgbe_fc_autoneg - Configure flow control 2301 * @hw: pointer to hardware structure 2302 * 2303 * Compares our advertised flow control capabilities to those advertised by 2304 * our link partner, and determines the proper flow control mode to use. 2305 **/ 2306void ixgbe_fc_autoneg(struct ixgbe_hw *hw) 2307{ 2308 s32 ret_val = IXGBE_ERR_FC_NOT_NEGOTIATED; 2309 ixgbe_link_speed speed; 2310 bool link_up; 2311 2312 /* 2313 * AN should have completed when the cable was plugged in. 2314 * Look for reasons to bail out. Bail out if: 2315 * - FC autoneg is disabled, or if 2316 * - link is not up. 2317 * 2318 * Since we're being called from an LSC, link is already known to be up. 2319 * So use link_up_wait_to_complete=false. 2320 */ 2321 if (hw->fc.disable_fc_autoneg) 2322 goto out; 2323 2324 hw->mac.ops.check_link(hw, &speed, &link_up, false); 2325 if (!link_up) 2326 goto out; 2327 2328 switch (hw->phy.media_type) { 2329 /* Autoneg flow control on fiber adapters */ 2330 case ixgbe_media_type_fiber: 2331 if (speed == IXGBE_LINK_SPEED_1GB_FULL) 2332 ret_val = ixgbe_fc_autoneg_fiber(hw); 2333 break; 2334 2335 /* Autoneg flow control on backplane adapters */ 2336 case ixgbe_media_type_backplane: 2337 ret_val = ixgbe_fc_autoneg_backplane(hw); 2338 break; 2339 2340 /* Autoneg flow control on copper adapters */ 2341 case ixgbe_media_type_copper: 2342 if (ixgbe_device_supports_autoneg_fc(hw)) 2343 ret_val = ixgbe_fc_autoneg_copper(hw); 2344 break; 2345 2346 default: 2347 break; 2348 } 2349 2350out: 2351 if (ret_val == 0) { 2352 hw->fc.fc_was_autonegged = true; 2353 } else { 2354 hw->fc.fc_was_autonegged = false; 2355 hw->fc.current_mode = hw->fc.requested_mode; 2356 } 2357} 2358 2359/** 2360 * ixgbe_pcie_timeout_poll - Return number of times to poll for completion 2361 * @hw: pointer to hardware structure 2362 * 2363 * System-wide timeout range is encoded in PCIe Device Control2 register. 2364 * 2365 * Add 10% to specified maximum and return the number of times to poll for 2366 * completion timeout, in units of 100 microsec. Never return less than 2367 * 800 = 80 millisec. 2368 **/ 2369static u32 ixgbe_pcie_timeout_poll(struct ixgbe_hw *hw) 2370{ 2371 s16 devctl2; 2372 u32 pollcnt; 2373 2374 devctl2 = ixgbe_read_pci_cfg_word(hw, IXGBE_PCI_DEVICE_CONTROL2); 2375 devctl2 &= IXGBE_PCIDEVCTRL2_TIMEO_MASK; 2376 2377 switch (devctl2) { 2378 case IXGBE_PCIDEVCTRL2_65_130ms: 2379 pollcnt = 1300; /* 130 millisec */ 2380 break; 2381 case IXGBE_PCIDEVCTRL2_260_520ms: 2382 pollcnt = 5200; /* 520 millisec */ 2383 break; 2384 case IXGBE_PCIDEVCTRL2_1_2s: 2385 pollcnt = 20000; /* 2 sec */ 2386 break; 2387 case IXGBE_PCIDEVCTRL2_4_8s: 2388 pollcnt = 80000; /* 8 sec */ 2389 break; 2390 case IXGBE_PCIDEVCTRL2_17_34s: 2391 pollcnt = 34000; /* 34 sec */ 2392 break; 2393 case IXGBE_PCIDEVCTRL2_50_100us: /* 100 microsecs */ 2394 case IXGBE_PCIDEVCTRL2_1_2ms: /* 2 millisecs */ 2395 case IXGBE_PCIDEVCTRL2_16_32ms: /* 32 millisec */ 2396 case IXGBE_PCIDEVCTRL2_16_32ms_def: /* 32 millisec default */ 2397 default: 2398 pollcnt = 800; /* 80 millisec minimum */ 2399 break; 2400 } 2401 2402 /* add 10% to spec maximum */ 2403 return (pollcnt * 11) / 10; 2404} 2405 2406/** 2407 * ixgbe_disable_pcie_master - Disable PCI-express master access 2408 * @hw: pointer to hardware structure 2409 * 2410 * Disables PCI-Express master access and verifies there are no pending 2411 * requests. IXGBE_ERR_MASTER_REQUESTS_PENDING is returned if master disable 2412 * bit hasn't caused the master requests to be disabled, else 0 2413 * is returned signifying master requests disabled. 2414 **/ 2415static s32 ixgbe_disable_pcie_master(struct ixgbe_hw *hw) 2416{ 2417 u32 i, poll; 2418 u16 value; 2419 2420 /* Always set this bit to ensure any future transactions are blocked */ 2421 IXGBE_WRITE_REG(hw, IXGBE_CTRL, IXGBE_CTRL_GIO_DIS); 2422 2423 /* Exit if master requests are blocked */ 2424 if (!(IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_GIO) || 2425 ixgbe_removed(hw->hw_addr)) 2426 return 0; 2427 2428 /* Poll for master request bit to clear */ 2429 for (i = 0; i < IXGBE_PCI_MASTER_DISABLE_TIMEOUT; i++) { 2430 udelay(100); 2431 if (!(IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_GIO)) 2432 return 0; 2433 } 2434 2435 /* 2436 * Two consecutive resets are required via CTRL.RST per datasheet 2437 * 5.2.5.3.2 Master Disable. We set a flag to inform the reset routine 2438 * of this need. The first reset prevents new master requests from 2439 * being issued by our device. We then must wait 1usec or more for any 2440 * remaining completions from the PCIe bus to trickle in, and then reset 2441 * again to clear out any effects they may have had on our device. 2442 */ 2443 hw_dbg(hw, "GIO Master Disable bit didn't clear - requesting resets\n"); 2444 hw->mac.flags |= IXGBE_FLAGS_DOUBLE_RESET_REQUIRED; 2445 2446 /* 2447 * Before proceeding, make sure that the PCIe block does not have 2448 * transactions pending. 2449 */ 2450 poll = ixgbe_pcie_timeout_poll(hw); 2451 for (i = 0; i < poll; i++) { 2452 udelay(100); 2453 value = ixgbe_read_pci_cfg_word(hw, IXGBE_PCI_DEVICE_STATUS); 2454 if (ixgbe_removed(hw->hw_addr)) 2455 return 0; 2456 if (!(value & IXGBE_PCI_DEVICE_STATUS_TRANSACTION_PENDING)) 2457 return 0; 2458 } 2459 2460 hw_dbg(hw, "PCIe transaction pending bit also did not clear.\n"); 2461 return IXGBE_ERR_MASTER_REQUESTS_PENDING; 2462} 2463 2464/** 2465 * ixgbe_acquire_swfw_sync - Acquire SWFW semaphore 2466 * @hw: pointer to hardware structure 2467 * @mask: Mask to specify which semaphore to acquire 2468 * 2469 * Acquires the SWFW semaphore through the GSSR register for the specified 2470 * function (CSR, PHY0, PHY1, EEPROM, Flash) 2471 **/ 2472s32 ixgbe_acquire_swfw_sync(struct ixgbe_hw *hw, u16 mask) 2473{ 2474 u32 gssr = 0; 2475 u32 swmask = mask; 2476 u32 fwmask = mask << 5; 2477 u32 timeout = 200; 2478 u32 i; 2479 2480 for (i = 0; i < timeout; i++) { 2481 /* 2482 * SW NVM semaphore bit is used for access to all 2483 * SW_FW_SYNC bits (not just NVM) 2484 */ 2485 if (ixgbe_get_eeprom_semaphore(hw)) 2486 return IXGBE_ERR_SWFW_SYNC; 2487 2488 gssr = IXGBE_READ_REG(hw, IXGBE_GSSR); 2489 if (!(gssr & (fwmask | swmask))) { 2490 gssr |= swmask; 2491 IXGBE_WRITE_REG(hw, IXGBE_GSSR, gssr); 2492 ixgbe_release_eeprom_semaphore(hw); 2493 return 0; 2494 } else { 2495 /* Resource is currently in use by FW or SW */ 2496 ixgbe_release_eeprom_semaphore(hw); 2497 usleep_range(5000, 10000); 2498 } 2499 } 2500 2501 /* If time expired clear the bits holding the lock and retry */ 2502 if (gssr & (fwmask | swmask)) 2503 ixgbe_release_swfw_sync(hw, gssr & (fwmask | swmask)); 2504 2505 usleep_range(5000, 10000); 2506 return IXGBE_ERR_SWFW_SYNC; 2507} 2508 2509/** 2510 * ixgbe_release_swfw_sync - Release SWFW semaphore 2511 * @hw: pointer to hardware structure 2512 * @mask: Mask to specify which semaphore to release 2513 * 2514 * Releases the SWFW semaphore through the GSSR register for the specified 2515 * function (CSR, PHY0, PHY1, EEPROM, Flash) 2516 **/ 2517void ixgbe_release_swfw_sync(struct ixgbe_hw *hw, u16 mask) 2518{ 2519 u32 gssr; 2520 u32 swmask = mask; 2521 2522 ixgbe_get_eeprom_semaphore(hw); 2523 2524 gssr = IXGBE_READ_REG(hw, IXGBE_GSSR); 2525 gssr &= ~swmask; 2526 IXGBE_WRITE_REG(hw, IXGBE_GSSR, gssr); 2527 2528 ixgbe_release_eeprom_semaphore(hw); 2529} 2530 2531/** 2532 * prot_autoc_read_generic - Hides MAC differences needed for AUTOC read 2533 * @hw: pointer to hardware structure 2534 * @reg_val: Value we read from AUTOC 2535 * @locked: bool to indicate whether the SW/FW lock should be taken. Never 2536 * true in this the generic case. 2537 * 2538 * The default case requires no protection so just to the register read. 2539 **/ 2540s32 prot_autoc_read_generic(struct ixgbe_hw *hw, bool *locked, u32 *reg_val) 2541{ 2542 *locked = false; 2543 *reg_val = IXGBE_READ_REG(hw, IXGBE_AUTOC); 2544 return 0; 2545} 2546 2547/** 2548 * prot_autoc_write_generic - Hides MAC differences needed for AUTOC write 2549 * @hw: pointer to hardware structure 2550 * @reg_val: value to write to AUTOC 2551 * @locked: bool to indicate whether the SW/FW lock was already taken by 2552 * previous read. 2553 **/ 2554s32 prot_autoc_write_generic(struct ixgbe_hw *hw, u32 reg_val, bool locked) 2555{ 2556 IXGBE_WRITE_REG(hw, IXGBE_AUTOC, reg_val); 2557 return 0; 2558} 2559 2560/** 2561 * ixgbe_disable_rx_buff_generic - Stops the receive data path 2562 * @hw: pointer to hardware structure 2563 * 2564 * Stops the receive data path and waits for the HW to internally 2565 * empty the Rx security block. 2566 **/ 2567s32 ixgbe_disable_rx_buff_generic(struct ixgbe_hw *hw) 2568{ 2569#define IXGBE_MAX_SECRX_POLL 40 2570 int i; 2571 int secrxreg; 2572 2573 secrxreg = IXGBE_READ_REG(hw, IXGBE_SECRXCTRL); 2574 secrxreg |= IXGBE_SECRXCTRL_RX_DIS; 2575 IXGBE_WRITE_REG(hw, IXGBE_SECRXCTRL, secrxreg); 2576 for (i = 0; i < IXGBE_MAX_SECRX_POLL; i++) { 2577 secrxreg = IXGBE_READ_REG(hw, IXGBE_SECRXSTAT); 2578 if (secrxreg & IXGBE_SECRXSTAT_SECRX_RDY) 2579 break; 2580 else 2581 /* Use interrupt-safe sleep just in case */ 2582 udelay(1000); 2583 } 2584 2585 /* For informational purposes only */ 2586 if (i >= IXGBE_MAX_SECRX_POLL) 2587 hw_dbg(hw, "Rx unit being enabled before security path fully disabled. Continuing with init.\n"); 2588 2589 return 0; 2590 2591} 2592 2593/** 2594 * ixgbe_enable_rx_buff - Enables the receive data path 2595 * @hw: pointer to hardware structure 2596 * 2597 * Enables the receive data path 2598 **/ 2599s32 ixgbe_enable_rx_buff_generic(struct ixgbe_hw *hw) 2600{ 2601 int secrxreg; 2602 2603 secrxreg = IXGBE_READ_REG(hw, IXGBE_SECRXCTRL); 2604 secrxreg &= ~IXGBE_SECRXCTRL_RX_DIS; 2605 IXGBE_WRITE_REG(hw, IXGBE_SECRXCTRL, secrxreg); 2606 IXGBE_WRITE_FLUSH(hw); 2607 2608 return 0; 2609} 2610 2611/** 2612 * ixgbe_enable_rx_dma_generic - Enable the Rx DMA unit 2613 * @hw: pointer to hardware structure 2614 * @regval: register value to write to RXCTRL 2615 * 2616 * Enables the Rx DMA unit 2617 **/ 2618s32 ixgbe_enable_rx_dma_generic(struct ixgbe_hw *hw, u32 regval) 2619{ 2620 IXGBE_WRITE_REG(hw, IXGBE_RXCTRL, regval); 2621 2622 return 0; 2623} 2624 2625/** 2626 * ixgbe_blink_led_start_generic - Blink LED based on index. 2627 * @hw: pointer to hardware structure 2628 * @index: led number to blink 2629 **/ 2630s32 ixgbe_blink_led_start_generic(struct ixgbe_hw *hw, u32 index) 2631{ 2632 ixgbe_link_speed speed = 0; 2633 bool link_up = false; 2634 u32 autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC); 2635 u32 led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL); 2636 bool locked = false; 2637 s32 ret_val; 2638 2639 /* 2640 * Link must be up to auto-blink the LEDs; 2641 * Force it if link is down. 2642 */ 2643 hw->mac.ops.check_link(hw, &speed, &link_up, false); 2644 2645 if (!link_up) { 2646 ret_val = hw->mac.ops.prot_autoc_read(hw, &locked, &autoc_reg); 2647 if (ret_val) 2648 return ret_val; 2649 2650 autoc_reg |= IXGBE_AUTOC_AN_RESTART; 2651 autoc_reg |= IXGBE_AUTOC_FLU; 2652 2653 ret_val = hw->mac.ops.prot_autoc_write(hw, autoc_reg, locked); 2654 if (ret_val) 2655 return ret_val; 2656 2657 IXGBE_WRITE_FLUSH(hw); 2658 2659 usleep_range(10000, 20000); 2660 } 2661 2662 led_reg &= ~IXGBE_LED_MODE_MASK(index); 2663 led_reg |= IXGBE_LED_BLINK(index); 2664 IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, led_reg); 2665 IXGBE_WRITE_FLUSH(hw); 2666 2667 return 0; 2668} 2669 2670/** 2671 * ixgbe_blink_led_stop_generic - Stop blinking LED based on index. 2672 * @hw: pointer to hardware structure 2673 * @index: led number to stop blinking 2674 **/ 2675s32 ixgbe_blink_led_stop_generic(struct ixgbe_hw *hw, u32 index) 2676{ 2677 u32 autoc_reg = 0; 2678 u32 led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL); 2679 bool locked = false; 2680 s32 ret_val; 2681 2682 ret_val = hw->mac.ops.prot_autoc_read(hw, &locked, &autoc_reg); 2683 if (ret_val) 2684 return ret_val; 2685 2686 autoc_reg &= ~IXGBE_AUTOC_FLU; 2687 autoc_reg |= IXGBE_AUTOC_AN_RESTART; 2688 2689 ret_val = hw->mac.ops.prot_autoc_write(hw, autoc_reg, locked); 2690 if (ret_val) 2691 return ret_val; 2692 2693 led_reg &= ~IXGBE_LED_MODE_MASK(index); 2694 led_reg &= ~IXGBE_LED_BLINK(index); 2695 led_reg |= IXGBE_LED_LINK_ACTIVE << IXGBE_LED_MODE_SHIFT(index); 2696 IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, led_reg); 2697 IXGBE_WRITE_FLUSH(hw); 2698 2699 return 0; 2700} 2701 2702/** 2703 * ixgbe_get_san_mac_addr_offset - Get SAN MAC address offset from the EEPROM 2704 * @hw: pointer to hardware structure 2705 * @san_mac_offset: SAN MAC address offset 2706 * 2707 * This function will read the EEPROM location for the SAN MAC address 2708 * pointer, and returns the value at that location. This is used in both 2709 * get and set mac_addr routines. 2710 **/ 2711static s32 ixgbe_get_san_mac_addr_offset(struct ixgbe_hw *hw, 2712 u16 *san_mac_offset) 2713{ 2714 s32 ret_val; 2715 2716 /* 2717 * First read the EEPROM pointer to see if the MAC addresses are 2718 * available. 2719 */ 2720 ret_val = hw->eeprom.ops.read(hw, IXGBE_SAN_MAC_ADDR_PTR, 2721 san_mac_offset); 2722 if (ret_val) 2723 hw_err(hw, "eeprom read at offset %d failed\n", 2724 IXGBE_SAN_MAC_ADDR_PTR); 2725 2726 return ret_val; 2727} 2728 2729/** 2730 * ixgbe_get_san_mac_addr_generic - SAN MAC address retrieval from the EEPROM 2731 * @hw: pointer to hardware structure 2732 * @san_mac_addr: SAN MAC address 2733 * 2734 * Reads the SAN MAC address from the EEPROM, if it's available. This is 2735 * per-port, so set_lan_id() must be called before reading the addresses. 2736 * set_lan_id() is called by identify_sfp(), but this cannot be relied 2737 * upon for non-SFP connections, so we must call it here. 2738 **/ 2739s32 ixgbe_get_san_mac_addr_generic(struct ixgbe_hw *hw, u8 *san_mac_addr) 2740{ 2741 u16 san_mac_data, san_mac_offset; 2742 u8 i; 2743 s32 ret_val; 2744 2745 /* 2746 * First read the EEPROM pointer to see if the MAC addresses are 2747 * available. If they're not, no point in calling set_lan_id() here. 2748 */ 2749 ret_val = ixgbe_get_san_mac_addr_offset(hw, &san_mac_offset); 2750 if (ret_val || san_mac_offset == 0 || san_mac_offset == 0xFFFF) 2751 2752 goto san_mac_addr_clr; 2753 2754 /* make sure we know which port we need to program */ 2755 hw->mac.ops.set_lan_id(hw); 2756 /* apply the port offset to the address offset */ 2757 (hw->bus.func) ? (san_mac_offset += IXGBE_SAN_MAC_ADDR_PORT1_OFFSET) : 2758 (san_mac_offset += IXGBE_SAN_MAC_ADDR_PORT0_OFFSET); 2759 for (i = 0; i < 3; i++) { 2760 ret_val = hw->eeprom.ops.read(hw, san_mac_offset, 2761 &san_mac_data); 2762 if (ret_val) { 2763 hw_err(hw, "eeprom read at offset %d failed\n", 2764 san_mac_offset); 2765 goto san_mac_addr_clr; 2766 } 2767 san_mac_addr[i * 2] = (u8)(san_mac_data); 2768 san_mac_addr[i * 2 + 1] = (u8)(san_mac_data >> 8); 2769 san_mac_offset++; 2770 } 2771 return 0; 2772 2773san_mac_addr_clr: 2774 /* No addresses available in this EEPROM. It's not necessarily an 2775 * error though, so just wipe the local address and return. 2776 */ 2777 for (i = 0; i < 6; i++) 2778 san_mac_addr[i] = 0xFF; 2779 return ret_val; 2780} 2781 2782/** 2783 * ixgbe_get_pcie_msix_count_generic - Gets MSI-X vector count 2784 * @hw: pointer to hardware structure 2785 * 2786 * Read PCIe configuration space, and get the MSI-X vector count from 2787 * the capabilities table. 2788 **/ 2789u16 ixgbe_get_pcie_msix_count_generic(struct ixgbe_hw *hw) 2790{ 2791 u16 msix_count; 2792 u16 max_msix_count; 2793 u16 pcie_offset; 2794 2795 switch (hw->mac.type) { 2796 case ixgbe_mac_82598EB: 2797 pcie_offset = IXGBE_PCIE_MSIX_82598_CAPS; 2798 max_msix_count = IXGBE_MAX_MSIX_VECTORS_82598; 2799 break; 2800 case ixgbe_mac_82599EB: 2801 case ixgbe_mac_X540: 2802 pcie_offset = IXGBE_PCIE_MSIX_82599_CAPS; 2803 max_msix_count = IXGBE_MAX_MSIX_VECTORS_82599; 2804 break; 2805 default: 2806 return 1; 2807 } 2808 2809 msix_count = ixgbe_read_pci_cfg_word(hw, pcie_offset); 2810 if (ixgbe_removed(hw->hw_addr)) 2811 msix_count = 0; 2812 msix_count &= IXGBE_PCIE_MSIX_TBL_SZ_MASK; 2813 2814 /* MSI-X count is zero-based in HW */ 2815 msix_count++; 2816 2817 if (msix_count > max_msix_count) 2818 msix_count = max_msix_count; 2819 2820 return msix_count; 2821} 2822 2823/** 2824 * ixgbe_clear_vmdq_generic - Disassociate a VMDq pool index from a rx address 2825 * @hw: pointer to hardware struct 2826 * @rar: receive address register index to disassociate 2827 * @vmdq: VMDq pool index to remove from the rar 2828 **/ 2829s32 ixgbe_clear_vmdq_generic(struct ixgbe_hw *hw, u32 rar, u32 vmdq) 2830{ 2831 u32 mpsar_lo, mpsar_hi; 2832 u32 rar_entries = hw->mac.num_rar_entries; 2833 2834 /* Make sure we are using a valid rar index range */ 2835 if (rar >= rar_entries) { 2836 hw_dbg(hw, "RAR index %d is out of range.\n", rar); 2837 return IXGBE_ERR_INVALID_ARGUMENT; 2838 } 2839 2840 mpsar_lo = IXGBE_READ_REG(hw, IXGBE_MPSAR_LO(rar)); 2841 mpsar_hi = IXGBE_READ_REG(hw, IXGBE_MPSAR_HI(rar)); 2842 2843 if (ixgbe_removed(hw->hw_addr)) 2844 return 0; 2845 2846 if (!mpsar_lo && !mpsar_hi) 2847 return 0; 2848 2849 if (vmdq == IXGBE_CLEAR_VMDQ_ALL) { 2850 if (mpsar_lo) { 2851 IXGBE_WRITE_REG(hw, IXGBE_MPSAR_LO(rar), 0); 2852 mpsar_lo = 0; 2853 } 2854 if (mpsar_hi) { 2855 IXGBE_WRITE_REG(hw, IXGBE_MPSAR_HI(rar), 0); 2856 mpsar_hi = 0; 2857 } 2858 } else if (vmdq < 32) { 2859 mpsar_lo &= ~(1 << vmdq); 2860 IXGBE_WRITE_REG(hw, IXGBE_MPSAR_LO(rar), mpsar_lo); 2861 } else { 2862 mpsar_hi &= ~(1 << (vmdq - 32)); 2863 IXGBE_WRITE_REG(hw, IXGBE_MPSAR_HI(rar), mpsar_hi); 2864 } 2865 2866 /* was that the last pool using this rar? */ 2867 if (mpsar_lo == 0 && mpsar_hi == 0 && rar != 0) 2868 hw->mac.ops.clear_rar(hw, rar); 2869 return 0; 2870} 2871 2872/** 2873 * ixgbe_set_vmdq_generic - Associate a VMDq pool index with a rx address 2874 * @hw: pointer to hardware struct 2875 * @rar: receive address register index to associate with a VMDq index 2876 * @vmdq: VMDq pool index 2877 **/ 2878s32 ixgbe_set_vmdq_generic(struct ixgbe_hw *hw, u32 rar, u32 vmdq) 2879{ 2880 u32 mpsar; 2881 u32 rar_entries = hw->mac.num_rar_entries; 2882 2883 /* Make sure we are using a valid rar index range */ 2884 if (rar >= rar_entries) { 2885 hw_dbg(hw, "RAR index %d is out of range.\n", rar); 2886 return IXGBE_ERR_INVALID_ARGUMENT; 2887 } 2888 2889 if (vmdq < 32) { 2890 mpsar = IXGBE_READ_REG(hw, IXGBE_MPSAR_LO(rar)); 2891 mpsar |= 1 << vmdq; 2892 IXGBE_WRITE_REG(hw, IXGBE_MPSAR_LO(rar), mpsar); 2893 } else { 2894 mpsar = IXGBE_READ_REG(hw, IXGBE_MPSAR_HI(rar)); 2895 mpsar |= 1 << (vmdq - 32); 2896 IXGBE_WRITE_REG(hw, IXGBE_MPSAR_HI(rar), mpsar); 2897 } 2898 return 0; 2899} 2900 2901/** 2902 * This function should only be involved in the IOV mode. 2903 * In IOV mode, Default pool is next pool after the number of 2904 * VFs advertized and not 0. 2905 * MPSAR table needs to be updated for SAN_MAC RAR [hw->mac.san_mac_rar_index] 2906 * 2907 * ixgbe_set_vmdq_san_mac - Associate default VMDq pool index with a rx address 2908 * @hw: pointer to hardware struct 2909 * @vmdq: VMDq pool index 2910 **/ 2911s32 ixgbe_set_vmdq_san_mac_generic(struct ixgbe_hw *hw, u32 vmdq) 2912{ 2913 u32 rar = hw->mac.san_mac_rar_index; 2914 2915 if (vmdq < 32) { 2916 IXGBE_WRITE_REG(hw, IXGBE_MPSAR_LO(rar), 1 << vmdq); 2917 IXGBE_WRITE_REG(hw, IXGBE_MPSAR_HI(rar), 0); 2918 } else { 2919 IXGBE_WRITE_REG(hw, IXGBE_MPSAR_LO(rar), 0); 2920 IXGBE_WRITE_REG(hw, IXGBE_MPSAR_HI(rar), 1 << (vmdq - 32)); 2921 } 2922 2923 return 0; 2924} 2925 2926/** 2927 * ixgbe_init_uta_tables_generic - Initialize the Unicast Table Array 2928 * @hw: pointer to hardware structure 2929 **/ 2930s32 ixgbe_init_uta_tables_generic(struct ixgbe_hw *hw) 2931{ 2932 int i; 2933 2934 for (i = 0; i < 128; i++) 2935 IXGBE_WRITE_REG(hw, IXGBE_UTA(i), 0); 2936 2937 return 0; 2938} 2939 2940/** 2941 * ixgbe_find_vlvf_slot - find the vlanid or the first empty slot 2942 * @hw: pointer to hardware structure 2943 * @vlan: VLAN id to write to VLAN filter 2944 * 2945 * return the VLVF index where this VLAN id should be placed 2946 * 2947 **/ 2948static s32 ixgbe_find_vlvf_slot(struct ixgbe_hw *hw, u32 vlan) 2949{ 2950 u32 bits = 0; 2951 u32 first_empty_slot = 0; 2952 s32 regindex; 2953 2954 /* short cut the special case */ 2955 if (vlan == 0) 2956 return 0; 2957 2958 /* 2959 * Search for the vlan id in the VLVF entries. Save off the first empty 2960 * slot found along the way 2961 */ 2962 for (regindex = 1; regindex < IXGBE_VLVF_ENTRIES; regindex++) { 2963 bits = IXGBE_READ_REG(hw, IXGBE_VLVF(regindex)); 2964 if (!bits && !(first_empty_slot)) 2965 first_empty_slot = regindex; 2966 else if ((bits & 0x0FFF) == vlan) 2967 break; 2968 } 2969 2970 /* 2971 * If regindex is less than IXGBE_VLVF_ENTRIES, then we found the vlan 2972 * in the VLVF. Else use the first empty VLVF register for this 2973 * vlan id. 2974 */ 2975 if (regindex >= IXGBE_VLVF_ENTRIES) { 2976 if (first_empty_slot) 2977 regindex = first_empty_slot; 2978 else { 2979 hw_dbg(hw, "No space in VLVF.\n"); 2980 regindex = IXGBE_ERR_NO_SPACE; 2981 } 2982 } 2983 2984 return regindex; 2985} 2986 2987/** 2988 * ixgbe_set_vfta_generic - Set VLAN filter table 2989 * @hw: pointer to hardware structure 2990 * @vlan: VLAN id to write to VLAN filter 2991 * @vind: VMDq output index that maps queue to VLAN id in VFVFB 2992 * @vlan_on: boolean flag to turn on/off VLAN in VFVF 2993 * 2994 * Turn on/off specified VLAN in the VLAN filter table. 2995 **/ 2996s32 ixgbe_set_vfta_generic(struct ixgbe_hw *hw, u32 vlan, u32 vind, 2997 bool vlan_on) 2998{ 2999 s32 regindex; 3000 u32 bitindex; 3001 u32 vfta; 3002 u32 bits; 3003 u32 vt; 3004 u32 targetbit; 3005 bool vfta_changed = false; 3006 3007 if (vlan > 4095) 3008 return IXGBE_ERR_PARAM; 3009 3010 /* 3011 * this is a 2 part operation - first the VFTA, then the 3012 * VLVF and VLVFB if VT Mode is set 3013 * We don't write the VFTA until we know the VLVF part succeeded. 3014 */ 3015 3016 /* Part 1 3017 * The VFTA is a bitstring made up of 128 32-bit registers 3018 * that enable the particular VLAN id, much like the MTA: 3019 * bits[11-5]: which register 3020 * bits[4-0]: which bit in the register 3021 */ 3022 regindex = (vlan >> 5) & 0x7F; 3023 bitindex = vlan & 0x1F; 3024 targetbit = (1 << bitindex); 3025 vfta = IXGBE_READ_REG(hw, IXGBE_VFTA(regindex)); 3026 3027 if (vlan_on) { 3028 if (!(vfta & targetbit)) { 3029 vfta |= targetbit; 3030 vfta_changed = true; 3031 } 3032 } else { 3033 if ((vfta & targetbit)) { 3034 vfta &= ~targetbit; 3035 vfta_changed = true; 3036 } 3037 } 3038 3039 /* Part 2 3040 * If VT Mode is set 3041 * Either vlan_on 3042 * make sure the vlan is in VLVF 3043 * set the vind bit in the matching VLVFB 3044 * Or !vlan_on 3045 * clear the pool bit and possibly the vind 3046 */ 3047 vt = IXGBE_READ_REG(hw, IXGBE_VT_CTL); 3048 if (vt & IXGBE_VT_CTL_VT_ENABLE) { 3049 s32 vlvf_index; 3050 3051 vlvf_index = ixgbe_find_vlvf_slot(hw, vlan); 3052 if (vlvf_index < 0) 3053 return vlvf_index; 3054 3055 if (vlan_on) { 3056 /* set the pool bit */ 3057 if (vind < 32) { 3058 bits = IXGBE_READ_REG(hw, 3059 IXGBE_VLVFB(vlvf_index*2)); 3060 bits |= (1 << vind); 3061 IXGBE_WRITE_REG(hw, 3062 IXGBE_VLVFB(vlvf_index*2), 3063 bits); 3064 } else { 3065 bits = IXGBE_READ_REG(hw, 3066 IXGBE_VLVFB((vlvf_index*2)+1)); 3067 bits |= (1 << (vind-32)); 3068 IXGBE_WRITE_REG(hw, 3069 IXGBE_VLVFB((vlvf_index*2)+1), 3070 bits); 3071 } 3072 } else { 3073 /* clear the pool bit */ 3074 if (vind < 32) { 3075 bits = IXGBE_READ_REG(hw, 3076 IXGBE_VLVFB(vlvf_index*2)); 3077 bits &= ~(1 << vind); 3078 IXGBE_WRITE_REG(hw, 3079 IXGBE_VLVFB(vlvf_index*2), 3080 bits); 3081 bits |= IXGBE_READ_REG(hw, 3082 IXGBE_VLVFB((vlvf_index*2)+1)); 3083 } else { 3084 bits = IXGBE_READ_REG(hw, 3085 IXGBE_VLVFB((vlvf_index*2)+1)); 3086 bits &= ~(1 << (vind-32)); 3087 IXGBE_WRITE_REG(hw, 3088 IXGBE_VLVFB((vlvf_index*2)+1), 3089 bits); 3090 bits |= IXGBE_READ_REG(hw, 3091 IXGBE_VLVFB(vlvf_index*2)); 3092 } 3093 } 3094 3095 /* 3096 * If there are still bits set in the VLVFB registers 3097 * for the VLAN ID indicated we need to see if the 3098 * caller is requesting that we clear the VFTA entry bit. 3099 * If the caller has requested that we clear the VFTA 3100 * entry bit but there are still pools/VFs using this VLAN 3101 * ID entry then ignore the request. We're not worried 3102 * about the case where we're turning the VFTA VLAN ID 3103 * entry bit on, only when requested to turn it off as 3104 * there may be multiple pools and/or VFs using the 3105 * VLAN ID entry. In that case we cannot clear the 3106 * VFTA bit until all pools/VFs using that VLAN ID have also 3107 * been cleared. This will be indicated by "bits" being 3108 * zero. 3109 */ 3110 if (bits) { 3111 IXGBE_WRITE_REG(hw, IXGBE_VLVF(vlvf_index), 3112 (IXGBE_VLVF_VIEN | vlan)); 3113 if (!vlan_on) { 3114 /* someone wants to clear the vfta entry 3115 * but some pools/VFs are still using it. 3116 * Ignore it. */ 3117 vfta_changed = false; 3118 } 3119 } else { 3120 IXGBE_WRITE_REG(hw, IXGBE_VLVF(vlvf_index), 0); 3121 } 3122 } 3123 3124 if (vfta_changed) 3125 IXGBE_WRITE_REG(hw, IXGBE_VFTA(regindex), vfta); 3126 3127 return 0; 3128} 3129 3130/** 3131 * ixgbe_clear_vfta_generic - Clear VLAN filter table 3132 * @hw: pointer to hardware structure 3133 * 3134 * Clears the VLAN filer table, and the VMDq index associated with the filter 3135 **/ 3136s32 ixgbe_clear_vfta_generic(struct ixgbe_hw *hw) 3137{ 3138 u32 offset; 3139 3140 for (offset = 0; offset < hw->mac.vft_size; offset++) 3141 IXGBE_WRITE_REG(hw, IXGBE_VFTA(offset), 0); 3142 3143 for (offset = 0; offset < IXGBE_VLVF_ENTRIES; offset++) { 3144 IXGBE_WRITE_REG(hw, IXGBE_VLVF(offset), 0); 3145 IXGBE_WRITE_REG(hw, IXGBE_VLVFB(offset*2), 0); 3146 IXGBE_WRITE_REG(hw, IXGBE_VLVFB((offset*2)+1), 0); 3147 } 3148 3149 return 0; 3150} 3151 3152/** 3153 * ixgbe_check_mac_link_generic - Determine link and speed status 3154 * @hw: pointer to hardware structure 3155 * @speed: pointer to link speed 3156 * @link_up: true when link is up 3157 * @link_up_wait_to_complete: bool used to wait for link up or not 3158 * 3159 * Reads the links register to determine if link is up and the current speed 3160 **/ 3161s32 ixgbe_check_mac_link_generic(struct ixgbe_hw *hw, ixgbe_link_speed *speed, 3162 bool *link_up, bool link_up_wait_to_complete) 3163{ 3164 u32 links_reg, links_orig; 3165 u32 i; 3166 3167 /* clear the old state */ 3168 links_orig = IXGBE_READ_REG(hw, IXGBE_LINKS); 3169 3170 links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS); 3171 3172 if (links_orig != links_reg) { 3173 hw_dbg(hw, "LINKS changed from %08X to %08X\n", 3174 links_orig, links_reg); 3175 } 3176 3177 if (link_up_wait_to_complete) { 3178 for (i = 0; i < IXGBE_LINK_UP_TIME; i++) { 3179 if (links_reg & IXGBE_LINKS_UP) { 3180 *link_up = true; 3181 break; 3182 } else { 3183 *link_up = false; 3184 } 3185 msleep(100); 3186 links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS); 3187 } 3188 } else { 3189 if (links_reg & IXGBE_LINKS_UP) 3190 *link_up = true; 3191 else 3192 *link_up = false; 3193 } 3194 3195 if ((links_reg & IXGBE_LINKS_SPEED_82599) == 3196 IXGBE_LINKS_SPEED_10G_82599) 3197 *speed = IXGBE_LINK_SPEED_10GB_FULL; 3198 else if ((links_reg & IXGBE_LINKS_SPEED_82599) == 3199 IXGBE_LINKS_SPEED_1G_82599) 3200 *speed = IXGBE_LINK_SPEED_1GB_FULL; 3201 else if ((links_reg & IXGBE_LINKS_SPEED_82599) == 3202 IXGBE_LINKS_SPEED_100_82599) 3203 *speed = IXGBE_LINK_SPEED_100_FULL; 3204 else 3205 *speed = IXGBE_LINK_SPEED_UNKNOWN; 3206 3207 return 0; 3208} 3209 3210/** 3211 * ixgbe_get_wwn_prefix_generic - Get alternative WWNN/WWPN prefix from 3212 * the EEPROM 3213 * @hw: pointer to hardware structure 3214 * @wwnn_prefix: the alternative WWNN prefix 3215 * @wwpn_prefix: the alternative WWPN prefix 3216 * 3217 * This function will read the EEPROM from the alternative SAN MAC address 3218 * block to check the support for the alternative WWNN/WWPN prefix support. 3219 **/ 3220s32 ixgbe_get_wwn_prefix_generic(struct ixgbe_hw *hw, u16 *wwnn_prefix, 3221 u16 *wwpn_prefix) 3222{ 3223 u16 offset, caps; 3224 u16 alt_san_mac_blk_offset; 3225 3226 /* clear output first */ 3227 *wwnn_prefix = 0xFFFF; 3228 *wwpn_prefix = 0xFFFF; 3229 3230 /* check if alternative SAN MAC is supported */ 3231 offset = IXGBE_ALT_SAN_MAC_ADDR_BLK_PTR; 3232 if (hw->eeprom.ops.read(hw, offset, &alt_san_mac_blk_offset)) 3233 goto wwn_prefix_err; 3234 3235 if ((alt_san_mac_blk_offset == 0) || 3236 (alt_san_mac_blk_offset == 0xFFFF)) 3237 return 0; 3238 3239 /* check capability in alternative san mac address block */ 3240 offset = alt_san_mac_blk_offset + IXGBE_ALT_SAN_MAC_ADDR_CAPS_OFFSET; 3241 if (hw->eeprom.ops.read(hw, offset, &caps)) 3242 goto wwn_prefix_err; 3243 if (!(caps & IXGBE_ALT_SAN_MAC_ADDR_CAPS_ALTWWN)) 3244 return 0; 3245 3246 /* get the corresponding prefix for WWNN/WWPN */ 3247 offset = alt_san_mac_blk_offset + IXGBE_ALT_SAN_MAC_ADDR_WWNN_OFFSET; 3248 if (hw->eeprom.ops.read(hw, offset, wwnn_prefix)) 3249 hw_err(hw, "eeprom read at offset %d failed\n", offset); 3250 3251 offset = alt_san_mac_blk_offset + IXGBE_ALT_SAN_MAC_ADDR_WWPN_OFFSET; 3252 if (hw->eeprom.ops.read(hw, offset, wwpn_prefix)) 3253 goto wwn_prefix_err; 3254 3255 return 0; 3256 3257wwn_prefix_err: 3258 hw_err(hw, "eeprom read at offset %d failed\n", offset); 3259 return 0; 3260} 3261 3262/** 3263 * ixgbe_set_mac_anti_spoofing - Enable/Disable MAC anti-spoofing 3264 * @hw: pointer to hardware structure 3265 * @enable: enable or disable switch for anti-spoofing 3266 * @pf: Physical Function pool - do not enable anti-spoofing for the PF 3267 * 3268 **/ 3269void ixgbe_set_mac_anti_spoofing(struct ixgbe_hw *hw, bool enable, int pf) 3270{ 3271 int j; 3272 int pf_target_reg = pf >> 3; 3273 int pf_target_shift = pf % 8; 3274 u32 pfvfspoof = 0; 3275 3276 if (hw->mac.type == ixgbe_mac_82598EB) 3277 return; 3278 3279 if (enable) 3280 pfvfspoof = IXGBE_SPOOF_MACAS_MASK; 3281 3282 /* 3283 * PFVFSPOOF register array is size 8 with 8 bits assigned to 3284 * MAC anti-spoof enables in each register array element. 3285 */ 3286 for (j = 0; j < pf_target_reg; j++) 3287 IXGBE_WRITE_REG(hw, IXGBE_PFVFSPOOF(j), pfvfspoof); 3288 3289 /* 3290 * The PF should be allowed to spoof so that it can support 3291 * emulation mode NICs. Do not set the bits assigned to the PF 3292 */ 3293 pfvfspoof &= (1 << pf_target_shift) - 1; 3294 IXGBE_WRITE_REG(hw, IXGBE_PFVFSPOOF(j), pfvfspoof); 3295 3296 /* 3297 * Remaining pools belong to the PF so they do not need to have 3298 * anti-spoofing enabled. 3299 */ 3300 for (j++; j < IXGBE_PFVFSPOOF_REG_COUNT; j++) 3301 IXGBE_WRITE_REG(hw, IXGBE_PFVFSPOOF(j), 0); 3302} 3303 3304/** 3305 * ixgbe_set_vlan_anti_spoofing - Enable/Disable VLAN anti-spoofing 3306 * @hw: pointer to hardware structure 3307 * @enable: enable or disable switch for VLAN anti-spoofing 3308 * @pf: Virtual Function pool - VF Pool to set for VLAN anti-spoofing 3309 * 3310 **/ 3311void ixgbe_set_vlan_anti_spoofing(struct ixgbe_hw *hw, bool enable, int vf) 3312{ 3313 int vf_target_reg = vf >> 3; 3314 int vf_target_shift = vf % 8 + IXGBE_SPOOF_VLANAS_SHIFT; 3315 u32 pfvfspoof; 3316 3317 if (hw->mac.type == ixgbe_mac_82598EB) 3318 return; 3319 3320 pfvfspoof = IXGBE_READ_REG(hw, IXGBE_PFVFSPOOF(vf_target_reg)); 3321 if (enable) 3322 pfvfspoof |= (1 << vf_target_shift); 3323 else 3324 pfvfspoof &= ~(1 << vf_target_shift); 3325 IXGBE_WRITE_REG(hw, IXGBE_PFVFSPOOF(vf_target_reg), pfvfspoof); 3326} 3327 3328/** 3329 * ixgbe_get_device_caps_generic - Get additional device capabilities 3330 * @hw: pointer to hardware structure 3331 * @device_caps: the EEPROM word with the extra device capabilities 3332 * 3333 * This function will read the EEPROM location for the device capabilities, 3334 * and return the word through device_caps. 3335 **/ 3336s32 ixgbe_get_device_caps_generic(struct ixgbe_hw *hw, u16 *device_caps) 3337{ 3338 hw->eeprom.ops.read(hw, IXGBE_DEVICE_CAPS, device_caps); 3339 3340 return 0; 3341} 3342 3343/** 3344 * ixgbe_set_rxpba_generic - Initialize RX packet buffer 3345 * @hw: pointer to hardware structure 3346 * @num_pb: number of packet buffers to allocate 3347 * @headroom: reserve n KB of headroom 3348 * @strategy: packet buffer allocation strategy 3349 **/ 3350void ixgbe_set_rxpba_generic(struct ixgbe_hw *hw, 3351 int num_pb, 3352 u32 headroom, 3353 int strategy) 3354{ 3355 u32 pbsize = hw->mac.rx_pb_size; 3356 int i = 0; 3357 u32 rxpktsize, txpktsize, txpbthresh; 3358 3359 /* Reserve headroom */ 3360 pbsize -= headroom; 3361 3362 if (!num_pb) 3363 num_pb = 1; 3364 3365 /* Divide remaining packet buffer space amongst the number 3366 * of packet buffers requested using supplied strategy. 3367 */ 3368 switch (strategy) { 3369 case (PBA_STRATEGY_WEIGHTED): 3370 /* pba_80_48 strategy weight first half of packet buffer with 3371 * 5/8 of the packet buffer space. 3372 */ 3373 rxpktsize = ((pbsize * 5 * 2) / (num_pb * 8)); 3374 pbsize -= rxpktsize * (num_pb / 2); 3375 rxpktsize <<= IXGBE_RXPBSIZE_SHIFT; 3376 for (; i < (num_pb / 2); i++) 3377 IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(i), rxpktsize); 3378 /* Fall through to configure remaining packet buffers */ 3379 case (PBA_STRATEGY_EQUAL): 3380 /* Divide the remaining Rx packet buffer evenly among the TCs */ 3381 rxpktsize = (pbsize / (num_pb - i)) << IXGBE_RXPBSIZE_SHIFT; 3382 for (; i < num_pb; i++) 3383 IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(i), rxpktsize); 3384 break; 3385 default: 3386 break; 3387 } 3388 3389 /* 3390 * Setup Tx packet buffer and threshold equally for all TCs 3391 * TXPBTHRESH register is set in K so divide by 1024 and subtract 3392 * 10 since the largest packet we support is just over 9K. 3393 */ 3394 txpktsize = IXGBE_TXPBSIZE_MAX / num_pb; 3395 txpbthresh = (txpktsize / 1024) - IXGBE_TXPKT_SIZE_MAX; 3396 for (i = 0; i < num_pb; i++) { 3397 IXGBE_WRITE_REG(hw, IXGBE_TXPBSIZE(i), txpktsize); 3398 IXGBE_WRITE_REG(hw, IXGBE_TXPBTHRESH(i), txpbthresh); 3399 } 3400 3401 /* Clear unused TCs, if any, to zero buffer size*/ 3402 for (; i < IXGBE_MAX_PB; i++) { 3403 IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(i), 0); 3404 IXGBE_WRITE_REG(hw, IXGBE_TXPBSIZE(i), 0); 3405 IXGBE_WRITE_REG(hw, IXGBE_TXPBTHRESH(i), 0); 3406 } 3407} 3408 3409/** 3410 * ixgbe_calculate_checksum - Calculate checksum for buffer 3411 * @buffer: pointer to EEPROM 3412 * @length: size of EEPROM to calculate a checksum for 3413 * 3414 * Calculates the checksum for some buffer on a specified length. The 3415 * checksum calculated is returned. 3416 **/ 3417static u8 ixgbe_calculate_checksum(u8 *buffer, u32 length) 3418{ 3419 u32 i; 3420 u8 sum = 0; 3421 3422 if (!buffer) 3423 return 0; 3424 3425 for (i = 0; i < length; i++) 3426 sum += buffer[i]; 3427 3428 return (u8) (0 - sum); 3429} 3430 3431/** 3432 * ixgbe_host_interface_command - Issue command to manageability block 3433 * @hw: pointer to the HW structure 3434 * @buffer: contains the command to write and where the return status will 3435 * be placed 3436 * @length: length of buffer, must be multiple of 4 bytes 3437 * 3438 * Communicates with the manageability block. On success return 0 3439 * else return IXGBE_ERR_HOST_INTERFACE_COMMAND. 3440 **/ 3441static s32 ixgbe_host_interface_command(struct ixgbe_hw *hw, u32 *buffer, 3442 u32 length) 3443{ 3444 u32 hicr, i, bi; 3445 u32 hdr_size = sizeof(struct ixgbe_hic_hdr); 3446 u8 buf_len, dword_len; 3447 3448 if (length == 0 || length & 0x3 || 3449 length > IXGBE_HI_MAX_BLOCK_BYTE_LENGTH) { 3450 hw_dbg(hw, "Buffer length failure.\n"); 3451 return IXGBE_ERR_HOST_INTERFACE_COMMAND; 3452 } 3453 3454 /* Check that the host interface is enabled. */ 3455 hicr = IXGBE_READ_REG(hw, IXGBE_HICR); 3456 if ((hicr & IXGBE_HICR_EN) == 0) { 3457 hw_dbg(hw, "IXGBE_HOST_EN bit disabled.\n"); 3458 return IXGBE_ERR_HOST_INTERFACE_COMMAND; 3459 } 3460 3461 /* Calculate length in DWORDs */ 3462 dword_len = length >> 2; 3463 3464 /* 3465 * The device driver writes the relevant command block 3466 * into the ram area. 3467 */ 3468 for (i = 0; i < dword_len; i++) 3469 IXGBE_WRITE_REG_ARRAY(hw, IXGBE_FLEX_MNG, 3470 i, cpu_to_le32(buffer[i])); 3471 3472 /* Setting this bit tells the ARC that a new command is pending. */ 3473 IXGBE_WRITE_REG(hw, IXGBE_HICR, hicr | IXGBE_HICR_C); 3474 3475 for (i = 0; i < IXGBE_HI_COMMAND_TIMEOUT; i++) { 3476 hicr = IXGBE_READ_REG(hw, IXGBE_HICR); 3477 if (!(hicr & IXGBE_HICR_C)) 3478 break; 3479 usleep_range(1000, 2000); 3480 } 3481 3482 /* Check command successful completion. */ 3483 if (i == IXGBE_HI_COMMAND_TIMEOUT || 3484 (!(IXGBE_READ_REG(hw, IXGBE_HICR) & IXGBE_HICR_SV))) { 3485 hw_dbg(hw, "Command has failed with no status valid.\n"); 3486 return IXGBE_ERR_HOST_INTERFACE_COMMAND; 3487 } 3488 3489 /* Calculate length in DWORDs */ 3490 dword_len = hdr_size >> 2; 3491 3492 /* first pull in the header so we know the buffer length */ 3493 for (bi = 0; bi < dword_len; bi++) { 3494 buffer[bi] = IXGBE_READ_REG_ARRAY(hw, IXGBE_FLEX_MNG, bi); 3495 le32_to_cpus(&buffer[bi]); 3496 } 3497 3498 /* If there is any thing in data position pull it in */ 3499 buf_len = ((struct ixgbe_hic_hdr *)buffer)->buf_len; 3500 if (buf_len == 0) 3501 return 0; 3502 3503 if (length < (buf_len + hdr_size)) { 3504 hw_dbg(hw, "Buffer not large enough for reply message.\n"); 3505 return IXGBE_ERR_HOST_INTERFACE_COMMAND; 3506 } 3507 3508 /* Calculate length in DWORDs, add 3 for odd lengths */ 3509 dword_len = (buf_len + 3) >> 2; 3510 3511 /* Pull in the rest of the buffer (bi is where we left off)*/ 3512 for (; bi <= dword_len; bi++) { 3513 buffer[bi] = IXGBE_READ_REG_ARRAY(hw, IXGBE_FLEX_MNG, bi); 3514 le32_to_cpus(&buffer[bi]); 3515 } 3516 3517 return 0; 3518} 3519 3520/** 3521 * ixgbe_set_fw_drv_ver_generic - Sends driver version to firmware 3522 * @hw: pointer to the HW structure 3523 * @maj: driver version major number 3524 * @min: driver version minor number 3525 * @build: driver version build number 3526 * @sub: driver version sub build number 3527 * 3528 * Sends driver version number to firmware through the manageability 3529 * block. On success return 0 3530 * else returns IXGBE_ERR_SWFW_SYNC when encountering an error acquiring 3531 * semaphore or IXGBE_ERR_HOST_INTERFACE_COMMAND when command fails. 3532 **/ 3533s32 ixgbe_set_fw_drv_ver_generic(struct ixgbe_hw *hw, u8 maj, u8 min, 3534 u8 build, u8 sub) 3535{ 3536 struct ixgbe_hic_drv_info fw_cmd; 3537 int i; 3538 s32 ret_val; 3539 3540 if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_SW_MNG_SM)) 3541 return IXGBE_ERR_SWFW_SYNC; 3542 3543 fw_cmd.hdr.cmd = FW_CEM_CMD_DRIVER_INFO; 3544 fw_cmd.hdr.buf_len = FW_CEM_CMD_DRIVER_INFO_LEN; 3545 fw_cmd.hdr.cmd_or_resp.cmd_resv = FW_CEM_CMD_RESERVED; 3546 fw_cmd.port_num = (u8)hw->bus.func; 3547 fw_cmd.ver_maj = maj; 3548 fw_cmd.ver_min = min; 3549 fw_cmd.ver_build = build; 3550 fw_cmd.ver_sub = sub; 3551 fw_cmd.hdr.checksum = 0; 3552 fw_cmd.hdr.checksum = ixgbe_calculate_checksum((u8 *)&fw_cmd, 3553 (FW_CEM_HDR_LEN + fw_cmd.hdr.buf_len)); 3554 fw_cmd.pad = 0; 3555 fw_cmd.pad2 = 0; 3556 3557 for (i = 0; i <= FW_CEM_MAX_RETRIES; i++) { 3558 ret_val = ixgbe_host_interface_command(hw, (u32 *)&fw_cmd, 3559 sizeof(fw_cmd)); 3560 if (ret_val != 0) 3561 continue; 3562 3563 if (fw_cmd.hdr.cmd_or_resp.ret_status == 3564 FW_CEM_RESP_STATUS_SUCCESS) 3565 ret_val = 0; 3566 else 3567 ret_val = IXGBE_ERR_HOST_INTERFACE_COMMAND; 3568 3569 break; 3570 } 3571 3572 hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_SW_MNG_SM); 3573 return ret_val; 3574} 3575 3576/** 3577 * ixgbe_clear_tx_pending - Clear pending TX work from the PCIe fifo 3578 * @hw: pointer to the hardware structure 3579 * 3580 * The 82599 and x540 MACs can experience issues if TX work is still pending 3581 * when a reset occurs. This function prevents this by flushing the PCIe 3582 * buffers on the system. 3583 **/ 3584void ixgbe_clear_tx_pending(struct ixgbe_hw *hw) 3585{ 3586 u32 gcr_ext, hlreg0; 3587 3588 /* 3589 * If double reset is not requested then all transactions should 3590 * already be clear and as such there is no work to do 3591 */ 3592 if (!(hw->mac.flags & IXGBE_FLAGS_DOUBLE_RESET_REQUIRED)) 3593 return; 3594 3595 /* 3596 * Set loopback enable to prevent any transmits from being sent 3597 * should the link come up. This assumes that the RXCTRL.RXEN bit 3598 * has already been cleared. 3599 */ 3600 hlreg0 = IXGBE_READ_REG(hw, IXGBE_HLREG0); 3601 IXGBE_WRITE_REG(hw, IXGBE_HLREG0, hlreg0 | IXGBE_HLREG0_LPBK); 3602 3603 /* initiate cleaning flow for buffers in the PCIe transaction layer */ 3604 gcr_ext = IXGBE_READ_REG(hw, IXGBE_GCR_EXT); 3605 IXGBE_WRITE_REG(hw, IXGBE_GCR_EXT, 3606 gcr_ext | IXGBE_GCR_EXT_BUFFERS_CLEAR); 3607 3608 /* Flush all writes and allow 20usec for all transactions to clear */ 3609 IXGBE_WRITE_FLUSH(hw); 3610 udelay(20); 3611 3612 /* restore previous register values */ 3613 IXGBE_WRITE_REG(hw, IXGBE_GCR_EXT, gcr_ext); 3614 IXGBE_WRITE_REG(hw, IXGBE_HLREG0, hlreg0); 3615} 3616 3617static const u8 ixgbe_emc_temp_data[4] = { 3618 IXGBE_EMC_INTERNAL_DATA, 3619 IXGBE_EMC_DIODE1_DATA, 3620 IXGBE_EMC_DIODE2_DATA, 3621 IXGBE_EMC_DIODE3_DATA 3622}; 3623static const u8 ixgbe_emc_therm_limit[4] = { 3624 IXGBE_EMC_INTERNAL_THERM_LIMIT, 3625 IXGBE_EMC_DIODE1_THERM_LIMIT, 3626 IXGBE_EMC_DIODE2_THERM_LIMIT, 3627 IXGBE_EMC_DIODE3_THERM_LIMIT 3628}; 3629 3630/** 3631 * ixgbe_get_ets_data - Extracts the ETS bit data 3632 * @hw: pointer to hardware structure 3633 * @ets_cfg: extected ETS data 3634 * @ets_offset: offset of ETS data 3635 * 3636 * Returns error code. 3637 **/ 3638static s32 ixgbe_get_ets_data(struct ixgbe_hw *hw, u16 *ets_cfg, 3639 u16 *ets_offset) 3640{ 3641 s32 status; 3642 3643 status = hw->eeprom.ops.read(hw, IXGBE_ETS_CFG, ets_offset); 3644 if (status) 3645 return status; 3646 3647 if ((*ets_offset == 0x0000) || (*ets_offset == 0xFFFF)) 3648 return IXGBE_NOT_IMPLEMENTED; 3649 3650 status = hw->eeprom.ops.read(hw, *ets_offset, ets_cfg); 3651 if (status) 3652 return status; 3653 3654 if ((*ets_cfg & IXGBE_ETS_TYPE_MASK) != IXGBE_ETS_TYPE_EMC_SHIFTED) 3655 return IXGBE_NOT_IMPLEMENTED; 3656 3657 return 0; 3658} 3659 3660/** 3661 * ixgbe_get_thermal_sensor_data - Gathers thermal sensor data 3662 * @hw: pointer to hardware structure 3663 * 3664 * Returns the thermal sensor data structure 3665 **/ 3666s32 ixgbe_get_thermal_sensor_data_generic(struct ixgbe_hw *hw) 3667{ 3668 s32 status; 3669 u16 ets_offset; 3670 u16 ets_cfg; 3671 u16 ets_sensor; 3672 u8 num_sensors; 3673 u8 i; 3674 struct ixgbe_thermal_sensor_data *data = &hw->mac.thermal_sensor_data; 3675 3676 /* Only support thermal sensors attached to physical port 0 */ 3677 if ((IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_LAN_ID_1)) 3678 return IXGBE_NOT_IMPLEMENTED; 3679 3680 status = ixgbe_get_ets_data(hw, &ets_cfg, &ets_offset); 3681 if (status) 3682 return status; 3683 3684 num_sensors = (ets_cfg & IXGBE_ETS_NUM_SENSORS_MASK); 3685 if (num_sensors > IXGBE_MAX_SENSORS) 3686 num_sensors = IXGBE_MAX_SENSORS; 3687 3688 for (i = 0; i < num_sensors; i++) { 3689 u8 sensor_index; 3690 u8 sensor_location; 3691 3692 status = hw->eeprom.ops.read(hw, (ets_offset + 1 + i), 3693 &ets_sensor); 3694 if (status) 3695 return status; 3696 3697 sensor_index = ((ets_sensor & IXGBE_ETS_DATA_INDEX_MASK) >> 3698 IXGBE_ETS_DATA_INDEX_SHIFT); 3699 sensor_location = ((ets_sensor & IXGBE_ETS_DATA_LOC_MASK) >> 3700 IXGBE_ETS_DATA_LOC_SHIFT); 3701 3702 if (sensor_location != 0) { 3703 status = hw->phy.ops.read_i2c_byte(hw, 3704 ixgbe_emc_temp_data[sensor_index], 3705 IXGBE_I2C_THERMAL_SENSOR_ADDR, 3706 &data->sensor[i].temp); 3707 if (status) 3708 return status; 3709 } 3710 } 3711 3712 return 0; 3713} 3714 3715/** 3716 * ixgbe_init_thermal_sensor_thresh_generic - Inits thermal sensor thresholds 3717 * @hw: pointer to hardware structure 3718 * 3719 * Inits the thermal sensor thresholds according to the NVM map 3720 * and save off the threshold and location values into mac.thermal_sensor_data 3721 **/ 3722s32 ixgbe_init_thermal_sensor_thresh_generic(struct ixgbe_hw *hw) 3723{ 3724 s32 status; 3725 u16 ets_offset; 3726 u16 ets_cfg; 3727 u16 ets_sensor; 3728 u8 low_thresh_delta; 3729 u8 num_sensors; 3730 u8 therm_limit; 3731 u8 i; 3732 struct ixgbe_thermal_sensor_data *data = &hw->mac.thermal_sensor_data; 3733 3734 memset(data, 0, sizeof(struct ixgbe_thermal_sensor_data)); 3735 3736 /* Only support thermal sensors attached to physical port 0 */ 3737 if ((IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_LAN_ID_1)) 3738 return IXGBE_NOT_IMPLEMENTED; 3739 3740 status = ixgbe_get_ets_data(hw, &ets_cfg, &ets_offset); 3741 if (status) 3742 return status; 3743 3744 low_thresh_delta = ((ets_cfg & IXGBE_ETS_LTHRES_DELTA_MASK) >> 3745 IXGBE_ETS_LTHRES_DELTA_SHIFT); 3746 num_sensors = (ets_cfg & IXGBE_ETS_NUM_SENSORS_MASK); 3747 if (num_sensors > IXGBE_MAX_SENSORS) 3748 num_sensors = IXGBE_MAX_SENSORS; 3749 3750 for (i = 0; i < num_sensors; i++) { 3751 u8 sensor_index; 3752 u8 sensor_location; 3753 3754 if (hw->eeprom.ops.read(hw, ets_offset + 1 + i, &ets_sensor)) { 3755 hw_err(hw, "eeprom read at offset %d failed\n", 3756 ets_offset + 1 + i); 3757 continue; 3758 } 3759 sensor_index = ((ets_sensor & IXGBE_ETS_DATA_INDEX_MASK) >> 3760 IXGBE_ETS_DATA_INDEX_SHIFT); 3761 sensor_location = ((ets_sensor & IXGBE_ETS_DATA_LOC_MASK) >> 3762 IXGBE_ETS_DATA_LOC_SHIFT); 3763 therm_limit = ets_sensor & IXGBE_ETS_DATA_HTHRESH_MASK; 3764 3765 hw->phy.ops.write_i2c_byte(hw, 3766 ixgbe_emc_therm_limit[sensor_index], 3767 IXGBE_I2C_THERMAL_SENSOR_ADDR, therm_limit); 3768 3769 if (sensor_location == 0) 3770 continue; 3771 3772 data->sensor[i].location = sensor_location; 3773 data->sensor[i].caution_thresh = therm_limit; 3774 data->sensor[i].max_op_thresh = therm_limit - low_thresh_delta; 3775 } 3776 3777 return 0; 3778} 3779 3780