| 0f29b46d49b0ca50536632c6a33986c3171f5ea1 |
|
09-Aug-2014 |
Ira Weiny <ira.weiny@intel.com> |
IB/mad: add new ioctl to ABI to support new registration options
Registrations options are specified through flags. Definitions of flags will
be in subsequent patches.
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
|
| 911eccd284d13d78c92ec4f1f1092c03457d732a |
|
02-May-2014 |
Mike Marciniszyn <mike.marciniszyn@intel.com> |
IB/qib: Fix port in pkey change event
The code used a literal 1 in dispatching an IB_EVENT_PKEY_CHANGE.
As of the dual port qib QDR card, this is not necessarily correct.
Change to use the port as specified in the call.
Cc: <stable@vger.kernel.org>
Reported-by: Alex Estrin <alex.estrin@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
|
| 7d7632add8dd99f68b21546efff08a5a162de184 |
|
07-Mar-2014 |
Mike Marciniszyn <mike.marciniszyn@intel.com> |
IB/qib: Modify software pma counters to use percpu variables
The counters, unicast_xmit, unicast_rcv, multicast_xmit, multicast_rcv
are now maintained as percpu variables.
The mad code is modified to add a z_ latch so that the percpu counters
monotonically increase with appropriate adjustments in the reset,
read logic to maintain the z_ latch.
This patch also corrects the fact the unitcast_xmit wasn't handled
at all for UC and RC QPs.
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
|
| 4c3550057b83bde3250b2f105c7f56326fb43044 |
|
12-Sep-2012 |
Mike Marciniszyn <mike.marciniszyn@intel.com> |
IB/qib: Fix failure of compliance test C14-024#06_LocalPortNum
Commit 3236b2d469db ("IB/qib: MADs with misset M_Keys should return
failure") introduced a return code assignment that unfortunately
introduced an unconditional exit for the routine due to missing braces.
This patch adds the braces to correct the original patch.
Reviewed-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
|
| 36a8f01cd24b125aa027c71c1288588edde5322d |
|
19-Jul-2012 |
Mike Marciniszyn <mike.marciniszyn@intel.com> |
IB/qib: Add congestion control agent implementation
Add a congestion control agent in the driver that handles gets and
sets from the congestion control manager in the fabric for the
Performance Scale Messaging (PSM) library.
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
|
| 1fb9fed6d48960fec3ad8c97fed9aa16c9557091 |
|
16-Jul-2012 |
Mike Marciniszyn <mike.marciniszyn@intel.com> |
IB/qib: Fix QP RCU sparse warnings
Commit af061a644a0e ("IB/qib: Use RCU for qpn lookup") introduced sparse
warnings.
This patch corrects those issues.
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
|
| 3236b2d469dba42fde837b8cb06308f7f360dfed |
|
02-May-2012 |
Jim Foraker <foraker1@llnl.gov> |
IB/qib: MADs with misset M_Keys should return failure
If a MAD is sent directly to the local HCA rather than placed on a QP
and the MAD fails M_Key checks, there is no means to generate a
timeout for the client, which may hang. Instead we report
IB_MAD_RESULT_FAILURE, which operates the same for on-the-wire
packets, but will generate a send failure back to the client.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Jim Foraker <foraker1@llnl.gov>
Signed-off-by: Roland Dreier <roland@purestorage.com>
|
| 6199c8961e1bcd38c112bee9028d482e2a7768eb |
|
02-May-2012 |
Jim Foraker <foraker1@llnl.gov> |
IB/qib: Fix M_Key lease timeout handling
If a port has an M_Key lease set, the M_Key protect bits set to 1, and
a SubnSet arrives with an invalid M_Key, an M_Key mismatch trap is
generated, the lease timer begins as expected, and eventually the
M_Key protect bits will be set back to 0 as per the spec. However, if
any other SMP with an invalid M_Key arrives, the lease timer is expired
and the M_Key protect bits remain in force.
This is not according to to spec. In particular, C14-17 says that
a lease timer that is underway is not affected by protection level
checks (ie, at protection level 1, a SubnGet with a bad M_Key may be
successful, but does not stop the timer), and C14-19 says that the timer
shall stop when a valid M_Key has been received. C14-19 is the only
compliance statement that specifies a stopping condition for the timer.
This behavior is magnified if the port's Master SM LID attribute
points at itself. In that case, the M_Key mismatch trap is sufficient to
expire the timer, and the mkey lease attribute is rendered useless.
Reviewed-by: Ram Vepa <ram.vepa@qlogic.com>
Signed-off-by: Jim Foraker <foraker1@llnl.gov>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
|
| 4ccf28a26c981bcc6f938a7ea293a623d2d66d7b |
|
02-May-2012 |
Todd Rimmer <todd.rimmer@qlogic.com> |
IB/qib: Correct ordering of reregister vs. port active events
When a port first goes active with SMA Set(PortInfo) and reregister
bit set, the driver sends up the reregister event followed by a port
active event.
The problem is that in response to reregister event most apps try to
issue a SA query of some sort, but that fails because port is not
active.
The qib driver needs to a trivial change to correct this behavior.
This issue has been there for a while; however the recent serdes work
has probably made the delay between the reregister event and the
active event larger and hence opened the race far enough so that its
being seen more often.
The patch also changes the clientrereg local to a u8 and saves off the
rereg bit into it. The code following the nested subn_get_portinfo()
now restores that bit per o14-12.2.1 with a logical OR from that copy.
Reviewed-by: Ram Vepa <ram.vepa@qlogic.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
|
| 520b3ee70527cb47f0b08ceb25ace02aed71eab7 |
|
26-Feb-2012 |
Mike Marciniszyn <mike.marciniszyn@qlogic.com> |
IB/qib: Avoid filtering LID on SMA portinfo
The current get portinfo handling filters the LID being sent,
changing zero to 0xffff.
This causes OpenSM to log excessive warning messages.
Reviewed-by: Edward Mascarenhas <edward.mascarenhas@qlogic.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
|
| 6aea213a62122701891fe55cc3405d31b927cfde |
|
05-Jul-2011 |
Or Gerlitz <ogerlitz@mellanox.com> |
IB/pma: Add include file for IBA performance counters definitions
Move the various definitions and mad structures needed for software
implementation of IBA PM agent from the ipath and qib drivers into a
single include file, which in turn could be used by more consumers.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.co.il>
Signed-off-by: Roland Dreier <roland@purestorage.com>
|
| 36b87b419c7616a8aaa9889566d9a9b50689dee1 |
|
04-Mar-2011 |
Mitko Haralanov <mitko@qlogic.com> |
IB/qib: Fix M_Key field in SubnGet and SubnGetResp MADs
Set the M_Key field in SubnGet and SugnGetResp MADs based on correctly
interpreting the protection level specified in the M_KeyProtBits field.
Signed-off-by: Mitko Haralanov <mitko@qlogic.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
|
| cc7fb05946fb1cd2fd0582f9e39f759e20dfeefa |
|
23-Feb-2011 |
Mitko Haralanov <mitko@qlogic.com> |
IB/qib: Return correct MAD when setting link width to 255
Fix a bug which causes the driver to return incorrect MADs as a
response to Set(PortInfo) which sets the link width to 0xFF or link
speed to 0xF.
Signed-off-by: Mitko Haralanov <mitko@qlogic.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
|
| 3c9e5f4d657170c2fbc3d382d2daae3820713a6c |
|
11-Jan-2011 |
Mike Marciniszyn <mike.marciniszyn@qlogic.com> |
IB/qib: Set port physical state even if other fields are invalid
The IBTA vol. 1 release 1.2.1 spec. says:
C14-24.2.1: If PortInfo:Portstate=Down, then a SubnSet(PortInfo) shall
make any changes it specifies to PortInfo:PortPhysicalState; any other
result is vendor-dependent.
The patch changes the error handling so that the reply says there are
invalid fields but still attempts to set fields that are in range
including PortInfo:PortPhysicalState.
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
|
| f931551bafe1f10ded7f5282e2aa162c267a2e5d |
|
24-May-2010 |
Ralph Campbell <ralph.campbell@qlogic.com> |
IB/qib: Add new qib driver for QLogic PCIe InfiniBand adapters
Add a low-level IB driver for QLogic PCIe adapters.
Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
|