/*
comedi/drivers/amplc_dio200_common.c
Common support code for "amplc_dio200" and "amplc_dio200_pci".
Copyright (C) 2005-2013 MEV Ltd.
COMEDI - Linux Control and Measurement Device Interface
Copyright (C) 1998,2000 David A. Schleef
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
*/
#include
#include
#include "../comedidev.h"
#include "amplc_dio200.h"
#include "comedi_fc.h"
#include "8253.h"
#include "8255.h" /* only for register defines */
/* 200 series registers */
#define DIO200_IO_SIZE 0x20
#define DIO200_PCIE_IO_SIZE 0x4000
#define DIO200_XCLK_SCE 0x18 /* Group X clock selection register */
#define DIO200_YCLK_SCE 0x19 /* Group Y clock selection register */
#define DIO200_ZCLK_SCE 0x1a /* Group Z clock selection register */
#define DIO200_XGAT_SCE 0x1b /* Group X gate selection register */
#define DIO200_YGAT_SCE 0x1c /* Group Y gate selection register */
#define DIO200_ZGAT_SCE 0x1d /* Group Z gate selection register */
#define DIO200_INT_SCE 0x1e /* Interrupt enable/status register */
/* Extra registers for new PCIe boards */
#define DIO200_ENHANCE 0x20 /* 1 to enable enhanced features */
#define DIO200_VERSION 0x24 /* Hardware version register */
#define DIO200_TS_CONFIG 0x600 /* Timestamp timer config register */
#define DIO200_TS_COUNT 0x602 /* Timestamp timer count register */
/*
* Functions for constructing value for DIO_200_?CLK_SCE and
* DIO_200_?GAT_SCE registers:
*
* 'which' is: 0 for CTR-X1, CTR-Y1, CTR-Z1; 1 for CTR-X2, CTR-Y2 or CTR-Z2.
* 'chan' is the channel: 0, 1 or 2.
* 'source' is the signal source: 0 to 7, or 0 to 31 for "enhanced" boards.
*/
static unsigned char clk_gat_sce(unsigned int which, unsigned int chan,
unsigned int source)
{
return (which << 5) | (chan << 3) |
((source & 030) << 3) | (source & 007);
}
static unsigned char clk_sce(unsigned int which, unsigned int chan,
unsigned int source)
{
return clk_gat_sce(which, chan, source);
}
static unsigned char gat_sce(unsigned int which, unsigned int chan,
unsigned int source)
{
return clk_gat_sce(which, chan, source);
}
/*
* Periods of the internal clock sources in nanoseconds.
*/
static const unsigned int clock_period[32] = {
[1] = 100, /* 10 MHz */
[2] = 1000, /* 1 MHz */
[3] = 10000, /* 100 kHz */
[4] = 100000, /* 10 kHz */
[5] = 1000000, /* 1 kHz */
[11] = 50, /* 20 MHz (enhanced boards) */
/* clock sources 12 and later reserved for enhanced boards */
};
/*
* Timestamp timer configuration register (for new PCIe boards).
*/
#define TS_CONFIG_RESET 0x100 /* Reset counter to zero. */
#define TS_CONFIG_CLK_SRC_MASK 0x0FF /* Clock source. */
#define TS_CONFIG_MAX_CLK_SRC 2 /* Maximum clock source value. */
/*
* Periods of the timestamp timer clock sources in nanoseconds.
*/
static const unsigned int ts_clock_period[TS_CONFIG_MAX_CLK_SRC + 1] = {
1, /* 1 nanosecond (but with 20 ns granularity). */
1000, /* 1 microsecond. */
1000000, /* 1 millisecond. */
};
struct dio200_subdev_8254 {
unsigned int ofs; /* Counter base offset */
unsigned int clk_sce_ofs; /* CLK_SCE base address */
unsigned int gat_sce_ofs; /* GAT_SCE base address */
int which; /* Bit 5 of CLK_SCE or GAT_SCE */
unsigned int clock_src[3]; /* Current clock sources */
unsigned int gate_src[3]; /* Current gate sources */
spinlock_t spinlock;
};
struct dio200_subdev_8255 {
unsigned int ofs; /* DIO base offset */
};
struct dio200_subdev_intr {
spinlock_t spinlock;
unsigned int ofs;
unsigned int valid_isns;
unsigned int enabled_isns;
unsigned int stopcount;
bool active:1;
};
static unsigned char dio200_read8(struct comedi_device *dev,
unsigned int offset)
{
const struct dio200_board *board = dev->board_ptr;
if (board->is_pcie)
offset <<= 3;
if (dev->mmio)
return readb(dev->mmio + offset);
return inb(dev->iobase + offset);
}
static void dio200_write8(struct comedi_device *dev,
unsigned int offset, unsigned char val)
{
const struct dio200_board *board = dev->board_ptr;
if (board->is_pcie)
offset <<= 3;
if (dev->mmio)
writeb(val, dev->mmio + offset);
else
outb(val, dev->iobase + offset);
}
static unsigned int dio200_read32(struct comedi_device *dev,
unsigned int offset)
{
const struct dio200_board *board = dev->board_ptr;
if (board->is_pcie)
offset <<= 3;
if (dev->mmio)
return readl(dev->mmio + offset);
return inl(dev->iobase + offset);
}
static void dio200_write32(struct comedi_device *dev,
unsigned int offset, unsigned int val)
{
const struct dio200_board *board = dev->board_ptr;
if (board->is_pcie)
offset <<= 3;
if (dev->mmio)
writel(val, dev->mmio + offset);
else
outl(val, dev->iobase + offset);
}
static int dio200_subdev_intr_insn_bits(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_insn *insn,
unsigned int *data)
{
const struct dio200_board *board = dev->board_ptr;
struct dio200_subdev_intr *subpriv = s->private;
if (board->has_int_sce) {
/* Just read the interrupt status register. */
data[1] = dio200_read8(dev, subpriv->ofs) & subpriv->valid_isns;
} else {
/* No interrupt status register. */
data[0] = 0;
}
return insn->n;
}
static void dio200_stop_intr(struct comedi_device *dev,
struct comedi_subdevice *s)
{
const struct dio200_board *board = dev->board_ptr;
struct dio200_subdev_intr *subpriv = s->private;
subpriv->active = false;
subpriv->enabled_isns = 0;
if (board->has_int_sce)
dio200_write8(dev, subpriv->ofs, 0);
}
static void dio200_start_intr(struct comedi_device *dev,
struct comedi_subdevice *s)
{
const struct dio200_board *board = dev->board_ptr;
struct dio200_subdev_intr *subpriv = s->private;
struct comedi_cmd *cmd = &s->async->cmd;
unsigned int n;
unsigned isn_bits;
/* Determine interrupt sources to enable. */
isn_bits = 0;
if (cmd->chanlist) {
for (n = 0; n < cmd->chanlist_len; n++)
isn_bits |= (1U << CR_CHAN(cmd->chanlist[n]));
}
isn_bits &= subpriv->valid_isns;
/* Enable interrupt sources. */
subpriv->enabled_isns = isn_bits;
if (board->has_int_sce)
dio200_write8(dev, subpriv->ofs, isn_bits);
}
static int dio200_inttrig_start_intr(struct comedi_device *dev,
struct comedi_subdevice *s,
unsigned int trig_num)
{
struct dio200_subdev_intr *subpriv = s->private;
struct comedi_cmd *cmd = &s->async->cmd;
unsigned long flags;
if (trig_num != cmd->start_arg)
return -EINVAL;
spin_lock_irqsave(&subpriv->spinlock, flags);
s->async->inttrig = NULL;
if (subpriv->active)
dio200_start_intr(dev, s);
spin_unlock_irqrestore(&subpriv->spinlock, flags);
return 1;
}
static void dio200_read_scan_intr(struct comedi_device *dev,
struct comedi_subdevice *s,
unsigned int triggered)
{
struct dio200_subdev_intr *subpriv = s->private;
struct comedi_cmd *cmd = &s->async->cmd;
unsigned short val;
unsigned int n, ch;
val = 0;
for (n = 0; n < cmd->chanlist_len; n++) {
ch = CR_CHAN(cmd->chanlist[n]);
if (triggered & (1U << ch))
val |= (1U << n);
}
/* Write the scan to the buffer. */
if (comedi_buf_put(s, val)) {
s->async->events |= (COMEDI_CB_BLOCK | COMEDI_CB_EOS);
} else {
/* Error! Stop acquisition. */
dio200_stop_intr(dev, s);
s->async->events |= COMEDI_CB_ERROR | COMEDI_CB_OVERFLOW;
dev_err(dev->class_dev, "buffer overflow\n");
}
/* Check for end of acquisition. */
if (cmd->stop_src == TRIG_COUNT) {
if (subpriv->stopcount > 0) {
subpriv->stopcount--;
if (subpriv->stopcount == 0) {
s->async->events |= COMEDI_CB_EOA;
dio200_stop_intr(dev, s);
}
}
}
}
static int dio200_handle_read_intr(struct comedi_device *dev,
struct comedi_subdevice *s)
{
const struct dio200_board *board = dev->board_ptr;
struct dio200_subdev_intr *subpriv = s->private;
unsigned triggered;
unsigned intstat;
unsigned cur_enabled;
unsigned int oldevents;
unsigned long flags;
triggered = 0;
spin_lock_irqsave(&subpriv->spinlock, flags);
oldevents = s->async->events;
if (board->has_int_sce) {
/*
* Collect interrupt sources that have triggered and disable
* them temporarily. Loop around until no extra interrupt
* sources have triggered, at which point, the valid part of
* the interrupt status register will read zero, clearing the
* cause of the interrupt.
*
* Mask off interrupt sources already seen to avoid infinite
* loop in case of misconfiguration.
*/
cur_enabled = subpriv->enabled_isns;
while ((intstat = (dio200_read8(dev, subpriv->ofs) &
subpriv->valid_isns & ~triggered)) != 0) {
triggered |= intstat;
cur_enabled &= ~triggered;
dio200_write8(dev, subpriv->ofs, cur_enabled);
}
} else {
/*
* No interrupt status register. Assume the single interrupt
* source has triggered.
*/
triggered = subpriv->enabled_isns;
}
if (triggered) {
/*
* Some interrupt sources have triggered and have been
* temporarily disabled to clear the cause of the interrupt.
*
* Reenable them NOW to minimize the time they are disabled.
*/
cur_enabled = subpriv->enabled_isns;
if (board->has_int_sce)
dio200_write8(dev, subpriv->ofs, cur_enabled);
if (subpriv->active) {
/*
* The command is still active.
*
* Ignore interrupt sources that the command isn't
* interested in (just in case there's a race
* condition).
*/
if (triggered & subpriv->enabled_isns)
/* Collect scan data. */
dio200_read_scan_intr(dev, s, triggered);
}
}
spin_unlock_irqrestore(&subpriv->spinlock, flags);
if (oldevents != s->async->events)
comedi_event(dev, s);
return (triggered != 0);
}
static int dio200_subdev_intr_cancel(struct comedi_device *dev,
struct comedi_subdevice *s)
{
struct dio200_subdev_intr *subpriv = s->private;
unsigned long flags;
spin_lock_irqsave(&subpriv->spinlock, flags);
if (subpriv->active)
dio200_stop_intr(dev, s);
spin_unlock_irqrestore(&subpriv->spinlock, flags);
return 0;
}
static int dio200_subdev_intr_cmdtest(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_cmd *cmd)
{
int err = 0;
/* Step 1 : check if triggers are trivially valid */
err |= cfc_check_trigger_src(&cmd->start_src, TRIG_NOW | TRIG_INT);
err |= cfc_check_trigger_src(&cmd->scan_begin_src, TRIG_EXT);
err |= cfc_check_trigger_src(&cmd->convert_src, TRIG_NOW);
err |= cfc_check_trigger_src(&cmd->scan_end_src, TRIG_COUNT);
err |= cfc_check_trigger_src(&cmd->stop_src, TRIG_COUNT | TRIG_NONE);
if (err)
return 1;
/* Step 2a : make sure trigger sources are unique */
err |= cfc_check_trigger_is_unique(cmd->start_src);
err |= cfc_check_trigger_is_unique(cmd->stop_src);
/* Step 2b : and mutually compatible */
if (err)
return 2;
/* Step 3: check if arguments are trivially valid */
err |= cfc_check_trigger_arg_is(&cmd->start_arg, 0);
err |= cfc_check_trigger_arg_is(&cmd->scan_begin_arg, 0);
err |= cfc_check_trigger_arg_is(&cmd->convert_arg, 0);
err |= cfc_check_trigger_arg_is(&cmd->scan_end_arg, cmd->chanlist_len);
if (cmd->stop_src == TRIG_COUNT)
err |= cfc_check_trigger_arg_min(&cmd->stop_arg, 1);
else /* TRIG_NONE */
err |= cfc_check_trigger_arg_is(&cmd->stop_arg, 0);
if (err)
return 3;
/* step 4: fix up any arguments */
/* if (err) return 4; */
return 0;
}
static int dio200_subdev_intr_cmd(struct comedi_device *dev,
struct comedi_subdevice *s)
{
struct comedi_cmd *cmd = &s->async->cmd;
struct dio200_subdev_intr *subpriv = s->private;
unsigned long flags;
spin_lock_irqsave(&subpriv->spinlock, flags);
subpriv->active = true;
subpriv->stopcount = cmd->stop_arg;
if (cmd->start_src == TRIG_INT)
s->async->inttrig = dio200_inttrig_start_intr;
else /* TRIG_NOW */
dio200_start_intr(dev, s);
spin_unlock_irqrestore(&subpriv->spinlock, flags);
return 0;
}
static int dio200_subdev_intr_init(struct comedi_device *dev,
struct comedi_subdevice *s,
unsigned int offset,
unsigned valid_isns)
{
const struct dio200_board *board = dev->board_ptr;
struct dio200_subdev_intr *subpriv;
subpriv = comedi_alloc_spriv(s, sizeof(*subpriv));
if (!subpriv)
return -ENOMEM;
subpriv->ofs = offset;
subpriv->valid_isns = valid_isns;
spin_lock_init(&subpriv->spinlock);
if (board->has_int_sce)
/* Disable interrupt sources. */
dio200_write8(dev, subpriv->ofs, 0);
s->type = COMEDI_SUBD_DI;
s->subdev_flags = SDF_READABLE | SDF_CMD_READ;
if (board->has_int_sce) {
s->n_chan = DIO200_MAX_ISNS;
s->len_chanlist = DIO200_MAX_ISNS;
} else {
/* No interrupt source register. Support single channel. */
s->n_chan = 1;
s->len_chanlist = 1;
}
s->range_table = &range_digital;
s->maxdata = 1;
s->insn_bits = dio200_subdev_intr_insn_bits;
s->do_cmdtest = dio200_subdev_intr_cmdtest;
s->do_cmd = dio200_subdev_intr_cmd;
s->cancel = dio200_subdev_intr_cancel;
return 0;
}
static irqreturn_t dio200_interrupt(int irq, void *d)
{
struct comedi_device *dev = d;
struct comedi_subdevice *s = dev->read_subdev;
int handled;
if (!dev->attached)
return IRQ_NONE;
handled = dio200_handle_read_intr(dev, s);
return IRQ_RETVAL(handled);
}
static unsigned int dio200_subdev_8254_read_chan(struct comedi_device *dev,
struct comedi_subdevice *s,
unsigned int chan)
{
struct dio200_subdev_8254 *subpriv = s->private;
unsigned int val;
/* latch counter */
val = chan << 6;
dio200_write8(dev, subpriv->ofs + i8254_control_reg, val);
/* read lsb, msb */
val = dio200_read8(dev, subpriv->ofs + chan);
val += dio200_read8(dev, subpriv->ofs + chan) << 8;
return val;
}
static void dio200_subdev_8254_write_chan(struct comedi_device *dev,
struct comedi_subdevice *s,
unsigned int chan,
unsigned int count)
{
struct dio200_subdev_8254 *subpriv = s->private;
/* write lsb, msb */
dio200_write8(dev, subpriv->ofs + chan, count & 0xff);
dio200_write8(dev, subpriv->ofs + chan, (count >> 8) & 0xff);
}
static void dio200_subdev_8254_set_mode(struct comedi_device *dev,
struct comedi_subdevice *s,
unsigned int chan,
unsigned int mode)
{
struct dio200_subdev_8254 *subpriv = s->private;
unsigned int byte;
byte = chan << 6;
byte |= 0x30; /* access order: lsb, msb */
byte |= (mode & 0xf); /* counter mode and BCD|binary */
dio200_write8(dev, subpriv->ofs + i8254_control_reg, byte);
}
static unsigned int dio200_subdev_8254_status(struct comedi_device *dev,
struct comedi_subdevice *s,
unsigned int chan)
{
struct dio200_subdev_8254 *subpriv = s->private;
/* latch status */
dio200_write8(dev, subpriv->ofs + i8254_control_reg,
0xe0 | (2 << chan));
/* read status */
return dio200_read8(dev, subpriv->ofs + chan);
}
static int dio200_subdev_8254_read(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_insn *insn,
unsigned int *data)
{
struct dio200_subdev_8254 *subpriv = s->private;
int chan = CR_CHAN(insn->chanspec);
unsigned int n;
unsigned long flags;
for (n = 0; n < insn->n; n++) {
spin_lock_irqsave(&subpriv->spinlock, flags);
data[n] = dio200_subdev_8254_read_chan(dev, s, chan);
spin_unlock_irqrestore(&subpriv->spinlock, flags);
}
return insn->n;
}
static int dio200_subdev_8254_write(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_insn *insn,
unsigned int *data)
{
struct dio200_subdev_8254 *subpriv = s->private;
int chan = CR_CHAN(insn->chanspec);
unsigned int n;
unsigned long flags;
for (n = 0; n < insn->n; n++) {
spin_lock_irqsave(&subpriv->spinlock, flags);
dio200_subdev_8254_write_chan(dev, s, chan, data[n]);
spin_unlock_irqrestore(&subpriv->spinlock, flags);
}
return insn->n;
}
static int dio200_subdev_8254_set_gate_src(struct comedi_device *dev,
struct comedi_subdevice *s,
unsigned int counter_number,
unsigned int gate_src)
{
const struct dio200_board *board = dev->board_ptr;
struct dio200_subdev_8254 *subpriv = s->private;
unsigned char byte;
if (!board->has_clk_gat_sce)
return -1;
if (counter_number > 2)
return -1;
if (gate_src > (board->is_pcie ? 31 : 7))
return -1;
subpriv->gate_src[counter_number] = gate_src;
byte = gat_sce(subpriv->which, counter_number, gate_src);
dio200_write8(dev, subpriv->gat_sce_ofs, byte);
return 0;
}
static int dio200_subdev_8254_get_gate_src(struct comedi_device *dev,
struct comedi_subdevice *s,
unsigned int counter_number)
{
const struct dio200_board *board = dev->board_ptr;
struct dio200_subdev_8254 *subpriv = s->private;
if (!board->has_clk_gat_sce)
return -1;
if (counter_number > 2)
return -1;
return subpriv->gate_src[counter_number];
}
static int dio200_subdev_8254_set_clock_src(struct comedi_device *dev,
struct comedi_subdevice *s,
unsigned int counter_number,
unsigned int clock_src)
{
const struct dio200_board *board = dev->board_ptr;
struct dio200_subdev_8254 *subpriv = s->private;
unsigned char byte;
if (!board->has_clk_gat_sce)
return -1;
if (counter_number > 2)
return -1;
if (clock_src > (board->is_pcie ? 31 : 7))
return -1;
subpriv->clock_src[counter_number] = clock_src;
byte = clk_sce(subpriv->which, counter_number, clock_src);
dio200_write8(dev, subpriv->clk_sce_ofs, byte);
return 0;
}
static int dio200_subdev_8254_get_clock_src(struct comedi_device *dev,
struct comedi_subdevice *s,
unsigned int counter_number,
unsigned int *period_ns)
{
const struct dio200_board *board = dev->board_ptr;
struct dio200_subdev_8254 *subpriv = s->private;
unsigned clock_src;
if (!board->has_clk_gat_sce)
return -1;
if (counter_number > 2)
return -1;
clock_src = subpriv->clock_src[counter_number];
*period_ns = clock_period[clock_src];
return clock_src;
}
static int dio200_subdev_8254_config(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_insn *insn,
unsigned int *data)
{
struct dio200_subdev_8254 *subpriv = s->private;
int ret = 0;
int chan = CR_CHAN(insn->chanspec);
unsigned long flags;
spin_lock_irqsave(&subpriv->spinlock, flags);
switch (data[0]) {
case INSN_CONFIG_SET_COUNTER_MODE:
if (data[1] > (I8254_MODE5 | I8254_BCD))
ret = -EINVAL;
else
dio200_subdev_8254_set_mode(dev, s, chan, data[1]);
break;
case INSN_CONFIG_8254_READ_STATUS:
data[1] = dio200_subdev_8254_status(dev, s, chan);
break;
case INSN_CONFIG_SET_GATE_SRC:
ret = dio200_subdev_8254_set_gate_src(dev, s, chan, data[2]);
if (ret < 0)
ret = -EINVAL;
break;
case INSN_CONFIG_GET_GATE_SRC:
ret = dio200_subdev_8254_get_gate_src(dev, s, chan);
if (ret < 0) {
ret = -EINVAL;
break;
}
data[2] = ret;
break;
case INSN_CONFIG_SET_CLOCK_SRC:
ret = dio200_subdev_8254_set_clock_src(dev, s, chan, data[1]);
if (ret < 0)
ret = -EINVAL;
break;
case INSN_CONFIG_GET_CLOCK_SRC:
ret = dio200_subdev_8254_get_clock_src(dev, s, chan, &data[2]);
if (ret < 0) {
ret = -EINVAL;
break;
}
data[1] = ret;
break;
default:
ret = -EINVAL;
break;
}
spin_unlock_irqrestore(&subpriv->spinlock, flags);
return ret < 0 ? ret : insn->n;
}
static int dio200_subdev_8254_init(struct comedi_device *dev,
struct comedi_subdevice *s,
unsigned int offset)
{
const struct dio200_board *board = dev->board_ptr;
struct dio200_subdev_8254 *subpriv;
unsigned int chan;
subpriv = comedi_alloc_spriv(s, sizeof(*subpriv));
if (!subpriv)
return -ENOMEM;
s->type = COMEDI_SUBD_COUNTER;
s->subdev_flags = SDF_WRITABLE | SDF_READABLE;
s->n_chan = 3;
s->maxdata = 0xFFFF;
s->insn_read = dio200_subdev_8254_read;
s->insn_write = dio200_subdev_8254_write;
s->insn_config = dio200_subdev_8254_config;
spin_lock_init(&subpriv->spinlock);
subpriv->ofs = offset;
if (board->has_clk_gat_sce) {
/* Derive CLK_SCE and GAT_SCE register offsets from
* 8254 offset. */
subpriv->clk_sce_ofs = DIO200_XCLK_SCE + (offset >> 3);
subpriv->gat_sce_ofs = DIO200_XGAT_SCE + (offset >> 3);
subpriv->which = (offset >> 2) & 1;
}
/* Initialize channels. */
for (chan = 0; chan < 3; chan++) {
dio200_subdev_8254_set_mode(dev, s, chan,
I8254_MODE0 | I8254_BINARY);
if (board->has_clk_gat_sce) {
/* Gate source 0 is VCC (logic 1). */
dio200_subdev_8254_set_gate_src(dev, s, chan, 0);
/* Clock source 0 is the dedicated clock input. */
dio200_subdev_8254_set_clock_src(dev, s, chan, 0);
}
}
return 0;
}
static void dio200_subdev_8255_set_dir(struct comedi_device *dev,
struct comedi_subdevice *s)
{
struct dio200_subdev_8255 *subpriv = s->private;
int config;
config = I8255_CTRL_CW;
/* 1 in io_bits indicates output, 1 in config indicates input */
if (!(s->io_bits & 0x0000ff))
config |= I8255_CTRL_A_IO;
if (!(s->io_bits & 0x00ff00))
config |= I8255_CTRL_B_IO;
if (!(s->io_bits & 0x0f0000))
config |= I8255_CTRL_C_LO_IO;
if (!(s->io_bits & 0xf00000))
config |= I8255_CTRL_C_HI_IO;
dio200_write8(dev, subpriv->ofs + I8255_CTRL_REG, config);
}
static int dio200_subdev_8255_bits(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_insn *insn,
unsigned int *data)
{
struct dio200_subdev_8255 *subpriv = s->private;
unsigned int mask;
unsigned int val;
mask = comedi_dio_update_state(s, data);
if (mask) {
if (mask & 0xff)
dio200_write8(dev, subpriv->ofs + I8255_DATA_A_REG,
s->state & 0xff);
if (mask & 0xff00)
dio200_write8(dev, subpriv->ofs + I8255_DATA_B_REG,
(s->state >> 8) & 0xff);
if (mask & 0xff0000)
dio200_write8(dev, subpriv->ofs + I8255_DATA_C_REG,
(s->state >> 16) & 0xff);
}
val = dio200_read8(dev, subpriv->ofs + I8255_DATA_A_REG);
val |= dio200_read8(dev, subpriv->ofs + I8255_DATA_B_REG) << 8;
val |= dio200_read8(dev, subpriv->ofs + I8255_DATA_C_REG) << 16;
data[1] = val;
return insn->n;
}
static int dio200_subdev_8255_config(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_insn *insn,
unsigned int *data)
{
unsigned int chan = CR_CHAN(insn->chanspec);
unsigned int mask;
int ret;
if (chan < 8)
mask = 0x0000ff;
else if (chan < 16)
mask = 0x00ff00;
else if (chan < 20)
mask = 0x0f0000;
else
mask = 0xf00000;
ret = comedi_dio_insn_config(dev, s, insn, data, mask);
if (ret)
return ret;
dio200_subdev_8255_set_dir(dev, s);
return insn->n;
}
static int dio200_subdev_8255_init(struct comedi_device *dev,
struct comedi_subdevice *s,
unsigned int offset)
{
struct dio200_subdev_8255 *subpriv;
subpriv = comedi_alloc_spriv(s, sizeof(*subpriv));
if (!subpriv)
return -ENOMEM;
subpriv->ofs = offset;
s->type = COMEDI_SUBD_DIO;
s->subdev_flags = SDF_READABLE | SDF_WRITABLE;
s->n_chan = 24;
s->range_table = &range_digital;
s->maxdata = 1;
s->insn_bits = dio200_subdev_8255_bits;
s->insn_config = dio200_subdev_8255_config;
dio200_subdev_8255_set_dir(dev, s);
return 0;
}
static int dio200_subdev_timer_read(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_insn *insn,
unsigned int *data)
{
unsigned int n;
for (n = 0; n < insn->n; n++)
data[n] = dio200_read32(dev, DIO200_TS_COUNT);
return n;
}
static void dio200_subdev_timer_reset(struct comedi_device *dev,
struct comedi_subdevice *s)
{
unsigned int clock;
clock = dio200_read32(dev, DIO200_TS_CONFIG) & TS_CONFIG_CLK_SRC_MASK;
dio200_write32(dev, DIO200_TS_CONFIG, clock | TS_CONFIG_RESET);
dio200_write32(dev, DIO200_TS_CONFIG, clock);
}
static void dio200_subdev_timer_get_clock_src(struct comedi_device *dev,
struct comedi_subdevice *s,
unsigned int *src,
unsigned int *period)
{
unsigned int clk;
clk = dio200_read32(dev, DIO200_TS_CONFIG) & TS_CONFIG_CLK_SRC_MASK;
*src = clk;
*period = (clk < ARRAY_SIZE(ts_clock_period)) ?
ts_clock_period[clk] : 0;
}
static int dio200_subdev_timer_set_clock_src(struct comedi_device *dev,
struct comedi_subdevice *s,
unsigned int src)
{
if (src > TS_CONFIG_MAX_CLK_SRC)
return -EINVAL;
dio200_write32(dev, DIO200_TS_CONFIG, src);
return 0;
}
static int dio200_subdev_timer_config(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_insn *insn,
unsigned int *data)
{
int ret = 0;
switch (data[0]) {
case INSN_CONFIG_RESET:
dio200_subdev_timer_reset(dev, s);
break;
case INSN_CONFIG_SET_CLOCK_SRC:
ret = dio200_subdev_timer_set_clock_src(dev, s, data[1]);
if (ret < 0)
ret = -EINVAL;
break;
case INSN_CONFIG_GET_CLOCK_SRC:
dio200_subdev_timer_get_clock_src(dev, s, &data[1], &data[2]);
break;
default:
ret = -EINVAL;
break;
}
return ret < 0 ? ret : insn->n;
}
void amplc_dio200_set_enhance(struct comedi_device *dev, unsigned char val)
{
dio200_write8(dev, DIO200_ENHANCE, val);
}
EXPORT_SYMBOL_GPL(amplc_dio200_set_enhance);
int amplc_dio200_common_attach(struct comedi_device *dev, unsigned int irq,
unsigned long req_irq_flags)
{
const struct dio200_board *board = dev->board_ptr;
struct comedi_subdevice *s;
unsigned int n;
int ret;
ret = comedi_alloc_subdevices(dev, board->n_subdevs);
if (ret)
return ret;
for (n = 0; n < dev->n_subdevices; n++) {
s = &dev->subdevices[n];
switch (board->sdtype[n]) {
case sd_8254:
/* counter subdevice (8254) */
ret = dio200_subdev_8254_init(dev, s,
board->sdinfo[n]);
if (ret < 0)
return ret;
break;
case sd_8255:
/* digital i/o subdevice (8255) */
ret = dio200_subdev_8255_init(dev, s,
board->sdinfo[n]);
if (ret < 0)
return ret;
break;
case sd_intr:
/* 'INTERRUPT' subdevice */
if (irq && !dev->read_subdev) {
ret = dio200_subdev_intr_init(dev, s,
DIO200_INT_SCE,
board->sdinfo[n]);
if (ret < 0)
return ret;
dev->read_subdev = s;
} else {
s->type = COMEDI_SUBD_UNUSED;
}
break;
case sd_timer:
s->type = COMEDI_SUBD_TIMER;
s->subdev_flags = SDF_READABLE | SDF_LSAMPL;
s->n_chan = 1;
s->maxdata = 0xffffffff;
s->insn_read = dio200_subdev_timer_read;
s->insn_config = dio200_subdev_timer_config;
break;
default:
s->type = COMEDI_SUBD_UNUSED;
break;
}
}
if (irq && dev->read_subdev) {
if (request_irq(irq, dio200_interrupt, req_irq_flags,
dev->board_name, dev) >= 0) {
dev->irq = irq;
} else {
dev_warn(dev->class_dev,
"warning! irq %u unavailable!\n", irq);
}
}
return 0;
}
EXPORT_SYMBOL_GPL(amplc_dio200_common_attach);
static int __init amplc_dio200_common_init(void)
{
return 0;
}
module_init(amplc_dio200_common_init);
static void __exit amplc_dio200_common_exit(void)
{
}
module_exit(amplc_dio200_common_exit);
MODULE_AUTHOR("Comedi http://www.comedi.org");
MODULE_DESCRIPTION("Comedi helper for amplc_dio200 and amplc_dio200_pci");
MODULE_LICENSE("GPL");