2024-01-14

• reason: Issues: #30 and #31.
• config: ht_proxy_cfg.xml and lib/ht_release.py are modified.
• script: ht_project_setup.sh, .pre_setup.sh and .post_setup.sh updated.
• script: ht_2hass.service, ht_collgate.service, ht_proxy.service and httpd.service added.
• script: spi_clk_off.py and spi_clk_on.py removed.

2023-11-20

• reason: Issue: #29; failed 'paho-mqtt' installation.
• moduls: lib/Ccollgate.py and lib/ht_release.py are modified.
• script: .pre_setup.sh and .mqtt_setup.sh updated.

2023-11-08

• reason: Issue: #28; Mixposition and TS8 added.
• moduls: lib/gui_worker.py, lib/ht_discode.py and lib/ht_release.py are modified.
• config: HT3_db_cfg.xml and HT3_db_off_cfg.xml updated.
• docu : ~/HT3/sw/etc/html/HT3-Bus_Telegramme.html ID:866_22_0 assigned to TS8.

2023-10-06

• reason: Issues: #21, #24 and #28.
• moduls: all are modified.
• config: all are modified and have new content.
• importend notes: it's required to recreate the databases. The old once's aren't compatible anymore.

2023-03-22

• reason: Issue: #25 installation-scripts and displays.
• modul : create_databases.py, ht_project_setup.sh, __post_setup.sh modified.
• modul : db_rrdtool.py debug-output modified.
• modul : lib/ht_release.py updated.

2023-03-12

• reason: Issues: #18 and #20. GUI-display modified.
• modul : ht_discode.py, gui_worker.py, data.py modified.
• modul : lib/ht_release.py updated.

2022-12-12

• reason: socketerror cause early start of ht_collgate.py
• modul : ht_collgate.py modified.

2022-11-22

• reason: Issue: #23. recovering from USB disconnection.
• modul : lib/ht_proxy_if.py modified.
• modul : lib/ht_release.py updated.

2022-01-26

• reason: Issue: #15. new DeviceID's with IPM-Modules.
• modul : ht_discode.py modified.

2022-01-19

• reason: Issue: #17. new serial portnaming (changed from ttyAMA0 to serial0).
• modul : all configuration-files (*.xml) modified.

2021-06-16

• reason: Issue: #16. mqtt - LWT handling corrected.
• modul : ht_2hassio.py, lib/mqtt_client_if.py and config/mqtt_client_cfg.xml modified.

2021-03-12

• reason: Issue: #14. HomeAssistant IF added.
• modul : ht_2hassio.py, ht_2hass and lib/ht_release.py added.
• docu : HT3_Adaption.pdf modified for HA.

2021-02-25

• reason: Issue: #13.
• modul : gui_worker.py set to rev.:0.4.
• modul : lib/ht_proxy_if.py port# set to 48088.
• config: etc/config/ht_proxy_cfg.xml port# to:48088, etc/html/httpd.py port# to:48086.

10.09.2020

• modul : gui_worker.py with scrollbars and WW:'T-Soll max' added.
• modul : ht_discode.py decoding of MsgId's 51 & 52 improved, msglength check added.
• config: etc/config/HT3_db_cfg.xml and etc/config/HT3_db_off_cfg.xml WW:'V_spare_1' used as WW:'T-Soll max'.

03.12.2019

• moduls: Issue: Deprecated property InterCharTimeout #7; port.setInterCharTimeout() removed.

20.01.2019

• moduls: modified for new log-values, decoding upgraded for Cxyz Controller. See modul-header for details.
• minor modifications in configuration-files, already used databases (from 0.3) can be used further on.

24.06.2017

• moduls: ht_collgate.py, lib/Ccollgate.py, lib/mqtt_client_if.py and lib/SPS_if.py added.
• modul : HT3_Logger.py and ./etc/sysconfig/ht3_logger aren't used anymore and renamed to: *unused
• New configuration-files added for ht_collgate, mqtt- and SPS- interfaces.

20.10.2016

• autocreate_draw in minutes: modified in moduls: ht3_worker.py, data.py, HT3_db_cfg.xml.
• 3-bytes for solarpump-runtime: modified in modul: ht_discode.py.
• tempniveau for FRxyz-controller: added in moduls: ht_const.py, ht_yanetcom.py.

31.08.2016

• wrong path-extraction: corrected in modul: ht3_worker.py

29.08.2016

• Complete redesign of decoder and dispatcher using new modul: ht_discode.py.
  • Support for new controller-type: Cxyz added.
• moduls: ht_yanetcom.py and ht_netclinet.py are modified for handling with new controller-type: Cxyz.
• moduls: ht3_dispatch.py and ht3_decoder.py aren't used anymore and renamed to: ht3_*.py_unused
• autocreate_draw added in configuration-file: HT3_db_cfg.xml for updating rrdtool-draw every minute.
  • Default configured to: On.
• autoerase_olddata added in configuration-file: HT3_db_cfg.xml for deleting old dataentries in sqlite-db.
  • Default configured to: 30 days.
• db-table: rrdtool_info unused and deleted in sqlite-db.
  • rrdtool-db is updated instead every 60 seconds with all current data.
• modul: db_info.py renamed to: db_info.py_unused.
• MsgID added for every decoded message displayed as hexdump.
• GUI display-layout optimised for viewing all data.
• Autodetection of heater-circuit amount and mixed-/unmixed-circuit(s) results also now in GUI-layout update.
• Displaycode and Causecode added in GUI, database and configuration-file.
• Betriebsstatus added in GUI, database and configuration-file.
  • Values: Manuell and Auto are available.
• Displayed times changed from seconds to hours.
• Renaming of Betriebsart to Temperatur-Niveau in GUI, database and configuration-file.
• Betriebsart still in database but not supported anymore.
• script: rrdtool_draw.pl modified for items:Temperatur-Niveau and Betriebsstatus.
• accessname added in configuration-file for requesting decoded data [currently unused].
• upgrade rrdtool_db tool added for upgrading available rrdtool-database to this release: 0.2.

  • you must have a lot of free space on your drive (> 1 GB in folder: /tmp) doing this upgrade.
    

  • the upgrade takes a lot of time do be finished.
    

  • if this space isn't available, remove the old database and create a new rrdtool-database.
    

• importend notice the current sqlite-database must be deleted or renamed and has to be recreated for this release:0.2 using tool: ./create_databases.py.

05.08.2016

• never been an official release. Used only for testpurposes.

27.04.2016

• HeizkreisMsg_ID677_max33byte() corrected.
• msg:9x00FF00() handling with length of 10byte added.

22.02.2016

• IPM_LastschaltmodulMsg() fixed wrong HK-circuit assignment in ht3_decode.py.

10.02.2016

• HeizkreisMsg_ID677_max33byte() modified for better decoding.
• __GetStrBetriebsart() update with value 4:="Auto".

07.02.2016

• HeizkreisMsg_ID677_max33byte() added for CWxyz handling.

04.03.2015

• heizungspumpenleistung added.
• logging from ht_utils added.

10.01.2015

• first release on github.com.