[go: nahoru, domu]
Skip to content

Latest commit

 

History

History
73 lines (42 loc) · 5.65 KB

tips.md

File metadata and controls

73 lines (42 loc) · 5.65 KB
Raw

Usage Tips

  • To see the controls and shortcuts available, press "?" (Shift + /)

  • All buttons and fields in the UI have helpful tooltips you can view by hovering the cursor over them.

  • Clicking on the map will lock the cursor in place, allowing you to control the camera.

  • All commands are issued to the currently selected robot. Change which robot is selected with the dropdown in the top right.

  • If you send a new command to a robot while it's already running one, it will start the second command as soon as it finishes the first.

  • Wondering why the colors of the map are so weird? See here.

Tools

  • The five buttons in the Tools panel change what happens at your cursor location when you click while controlling the camera.

  • With the move tool selected, the robot will attempt to move to the highlighted point. This can fail if the movement is complex. If that happens, break the movement up into a few smaller ones.

  • With the interact tool selected, the robot will perform a right-click on the highlighted point using whatever tool the robot has equipped. This can be used for things like flipping levers and shearing sheep.

  • If you use the interact tool on a container such as a chest, its contents will be displayed to you, and you can put items in or take them out. Some blocks such as furnaces do not allow all displayed inventory slots to be used, and have different inventories depending on which side you access.

  • With the inspect tool selected, the robot will report in the command history panel exactly what is at the highlighted point.

  • The swing and place tools require you to select an area to operate on. With either of these tools selected, first click on one corner of the area you want to change. Next, click on the opposite corner of the area you want to change. Now you can either click a third time to finalize the area, or change it using the coordinate boxes on the right side of the screen. If you want to stop before finalizing, right click while controlling the camera, or click a button for a separate tool, and your selection will be undone.

  • With the swing tool selected, the robot will perform a left click action with its equipped tool on every block in the specified area. This can be used for things like digging and attacking.

  • With the place tool selected, the robot will attempt to place the block in its selected inventory slot (not the equip slot) at every empty space in the specified area.

Actions

  • The inventory button toggles the visibility of the robot's inventory. Closing and opening the inventory will update it. Drag and drop an item stack to move it, and click on a slot to select it.

  • The equip button exchanges the items in your selected slot and your equip slot.

  • The scan button reveals the area around the robot, with blocks colored by hardness. The scan size selector affects how large the scanned area will be. For slower computers, a large scan can be rather taxing, so use with care. A small scan will complete almost instantly, but you'll have to wait about 15 to 45 seconds for a large scan.

  • The center button will move the camera to be centered above the selected robot, looking down.

  • The list of items that can be crafted includes all items in Minecraft 1.11 and OpenComputers 1.6. It isn't yet possible to add your own recipes or change the existing ones.

  • The cutaway tool allows easy viewing of layers of ground that are obscured by the surface.

Robot

  • Run lua /home/lib/commandLoop.lua to have the robot begin listening for commands from the web client.

  • If you want the robot to begin listening to the Roboserver every time it starts, add the above command to the end of /home/.shrc.

  • Configuration settings for the robot are stored in /home/lib/config.txt.

  • You can easily modify configuration settings using the following command: lua /home/lib/config.lua settingName settingValue. This can be useful for changing the coordinates and orientation of your robot.

  • If you want to be able to send arbitrary Lua code to your robot from the web interface, edit /home/lib/config.txt and change components={} to components={raw=true}. This will cause a command input field to appear in the command history panel when you have the configured robot selected.

  • The command input field appends a return to the front of whatever you enter, which is convenient sometimes and inconvenient others. If you have statements reporting syntax errors that shouldn't be, this is likely why. You can work around it if you need to by wrapping your code in a function.

Config

Here's a list of what each possible setting in config.txt is for.

  • robotName: A unique name for your robot, used to tell it apart from other robots.
  • accountName: Your Roboserver account name.
  • serverIP: The IP address or hostname of your Roboserver. The default is 127.0.0.1. If you're using the standalone application, you don't need to change this.
  • tcpPort: the TCP port for your Roboserver. The default is 3001. Don't change this, it's not properly configurable yet.
  • posX: The X coordinate your robot will be displayed at in the application.
  • posY: The Y coordinate your robot will be displayed at in the application.
  • posZ: The Z coordinate your robot will be displayed at in the application.
  • orient: This should be 0 if your robot is facing South, 1 if East, 2 if North, 3 if West. It affects how the things your robot sees are displayed in the application.
  • components: An empty list by default. Adding raw=true inside it can allow you to run arbitrary Lua code on your robot from the application. In the future, this will be used to report which upgrades your robot has, allowing the use of more specialized robots.