English: Closeup of National Prototype Meter Bar No. 27, made in 1889 by the International Bureau of Weights and Measures (BIPM) and given to the United States, which served as the standard for defining all units of length in the US from 1893 to 1960. In 1960 the SI changed the standard of length to define the meter by the wavelength of light of a spectral line of krypton 86. This bar is now in the collection of the NIST Museum, Gaithersburg, Maryland, USA.
After the Treaty of the Meter had been signed in 1875, the BIPM in Sevres, France made 30 prototype standard bars of 90% platinum–10% iridium alloy. One of the bars was selected as the International Meter. Small elliptical areas on the upper surface of the central rib at each end of the bars were highly polished, and three lines, nominally 0.5 mm apart, were ruled on these surfaces, the distance between the middle lines of each group at the temperature of freezing water defining the meter. The bars had a modified X cross section named for the French scientist, Henri Tresca, who proposed it. The Tresca section was designed to provide maximum stiffness-to-weight ratio, reduce thermal accommodation time, and to enable the graduation lines to be located on the "neutral" axis of the bar, where change in length with flexure is minimum. After selecting the bar to be used as the International Prototype Meter, the other bars were calibrated relative to it and given to nations to serve as their national standards. The United States received National Prototype Meters No. 27 and No. 21 in 1890. The US adoption of the metric system in 1893 made the meter the fundamental length standard of the US, and No. 27 became the primary national standard for all length measurements. The relationship between No. 27 and the International Prototype Meter was certified to be 1 m − 1.6 µm + 8.657 µm·T + 0.001 µm·T2 ± 0.2 µm with T in degrees centigrade. Intercomparison between the International Meter and No. 27 yielded a probable error of ±0.04 µm. The probable uncertainty of the length of No. 27 at temperatures between 20°C and 25°C was estimated by BIPM to lie between ±0.1 µm and ±0.2 µm.
The main problem with defining the length standard by an artifact such as the meter bar is that there is no sure way to determine if it has changed length due to age, deterioration, or misuse. It can be compared to other bar standards, but these may have changed length themselves.
Data
Data sconosciuta
Fonte
This image was copied from wikipedia:en. Transwiki approved by: w:en:User:Dmcdevit. The original description was: National meter #27. From w:en:NIST museum.
Product of employee of US Government, NIST. Disclaimer on NIST website: "With the exception of material marked as copyrighted, information presented on these pages is considered public information and may be distributed or copied."
National meter #27. From <a href="http://en.wikipedia.org/wiki/NIST" class="extiw" title="w:NIST">w:NIST</a> museum After the Treaty of the Meter had been signed in 1875, the International Bureau of Weights and Measures (BIPM) in Sevres, France made 30 prototype line standards of platinum-iridium. The bars had a modified X cr
(National meter #27. From <a href="http://en.wikipedia.org/wiki/NIST" class="extiw" title="w:NIST">w:NIST</a> museum After the Treaty of the Meter had been signed in 1875, the International Bureau of Weights and Measures (BIPM) in Sevres, France made 30 prototype line standards of platinum-iridium. The bars had a modified X cr)
Didascalie
Aggiungi una brevissima spiegazione di ciò che questo file rappresenta
Urmeter
International Prototype Metre<\/a>\u00a0inglese<\/sup>"}},"text\/plain":{"it":{"P180":"International Prototype Metre"}}}}" class="wbmi-entityview-statementsGroup wbmi-entityview-statementsGroup-P180 oo-ui-layout oo-ui-panelLayout oo-ui-panelLayout-framed">
Transwiki approved by: w:en:User:Dmcdevit This image was copied from wikipedia:en. The original description was: National meter #27. From w:en:w:NIST museum After the Treaty of the Meter had been signed in 1875, the International Bureau of Weig
Questo file contiene informazioni aggiuntive, probabilmente aggiunte dalla fotocamera o dallo scanner usati per crearlo o digitalizzarlo. Se il file è stato modificato, alcuni dettagli potrebbero non corrispondere alla realtà.