1/* 2 * Copyright (C) 2007 The Android Open Source Project 3 * 4 * Licensed under the Apache License, Version 2.0 (the "License"); 5 * you may not use this file except in compliance with the License. 6 * You may obtain a copy of the License at 7 * 8 * http://www.apache.org/licenses/LICENSE-2.0 9 * 10 * Unless required by applicable law or agreed to in writing, software 11 * distributed under the License is distributed on an "AS IS" BASIS, 12 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 13 * See the License for the specific language governing permissions and 14 * limitations under the License. 15 */ 16 17package android.webkit; 18 19import android.annotation.IntDef; 20import android.annotation.SystemApi; 21import android.content.Context; 22 23import java.lang.annotation.ElementType; 24import java.lang.annotation.Retention; 25import java.lang.annotation.RetentionPolicy; 26import java.lang.annotation.Target; 27 28/** 29 * Manages settings state for a WebView. When a WebView is first created, it 30 * obtains a set of default settings. These default settings will be returned 31 * from any getter call. A WebSettings object obtained from 32 * WebView.getSettings() is tied to the life of the WebView. If a WebView has 33 * been destroyed, any method call on WebSettings will throw an 34 * IllegalStateException. 35 */ 36// This is an abstract base class: concrete WebViewProviders must 37// create a class derived from this, and return an instance of it in the 38// WebViewProvider.getWebSettingsProvider() method implementation. 39public abstract class WebSettings { 40 /** 41 * Enum for controlling the layout of html. 42 * <ul> 43 * <li>NORMAL means no rendering changes. This is the recommended choice for maximum 44 * compatibility across different platforms and Android versions.</li> 45 * <li>SINGLE_COLUMN moves all content into one column that is the width of the 46 * view.</li> 47 * <li>NARROW_COLUMNS makes all columns no wider than the screen if possible. Only use 48 * this for API levels prior to {@link android.os.Build.VERSION_CODES#KITKAT}.</li> 49 * <li>TEXT_AUTOSIZING boosts font size of paragraphs based on heuristics to make 50 * the text readable when viewing a wide-viewport layout in the overview mode. 51 * It is recommended to enable zoom support {@link #setSupportZoom} when 52 * using this mode. Supported from API level 53 * {@link android.os.Build.VERSION_CODES#KITKAT}</li> 54 * </ul> 55 */ 56 // XXX: These must match LayoutAlgorithm in Settings.h in WebCore. 57 public enum LayoutAlgorithm { 58 NORMAL, 59 /** 60 * @deprecated This algorithm is now obsolete. 61 */ 62 @Deprecated 63 SINGLE_COLUMN, 64 /** 65 * @deprecated This algorithm is now obsolete. 66 */ 67 @Deprecated 68 NARROW_COLUMNS, 69 TEXT_AUTOSIZING 70 } 71 72 /** 73 * Enum for specifying the text size. 74 * <ul> 75 * <li>SMALLEST is 50%</li> 76 * <li>SMALLER is 75%</li> 77 * <li>NORMAL is 100%</li> 78 * <li>LARGER is 150%</li> 79 * <li>LARGEST is 200%</li> 80 * </ul> 81 * 82 * @deprecated Use {@link WebSettings#setTextZoom(int)} and {@link WebSettings#getTextZoom()} instead. 83 */ 84 public enum TextSize { 85 SMALLEST(50), 86 SMALLER(75), 87 NORMAL(100), 88 LARGER(150), 89 LARGEST(200); 90 TextSize(int size) { 91 value = size; 92 } 93 int value; 94 } 95 96 /** 97 * Enum for specifying the WebView's desired density. 98 * <ul> 99 * <li>FAR makes 100% looking like in 240dpi</li> 100 * <li>MEDIUM makes 100% looking like in 160dpi</li> 101 * <li>CLOSE makes 100% looking like in 120dpi</li> 102 * </ul> 103 */ 104 public enum ZoomDensity { 105 FAR(150), // 240dpi 106 MEDIUM(100), // 160dpi 107 CLOSE(75); // 120dpi 108 ZoomDensity(int size) { 109 value = size; 110 } 111 112 /** 113 * @hide Only for use by WebViewProvider implementations 114 */ 115 public int getValue() { 116 return value; 117 } 118 119 int value; 120 } 121 122 /** @hide */ 123 @IntDef({LOAD_DEFAULT, LOAD_NORMAL, LOAD_CACHE_ELSE_NETWORK, LOAD_NO_CACHE, LOAD_CACHE_ONLY}) 124 @Retention(RetentionPolicy.SOURCE) 125 public @interface CacheMode {} 126 127 /** 128 * Default cache usage mode. If the navigation type doesn't impose any 129 * specific behavior, use cached resources when they are available 130 * and not expired, otherwise load resources from the network. 131 * Use with {@link #setCacheMode}. 132 */ 133 public static final int LOAD_DEFAULT = -1; 134 135 /** 136 * Normal cache usage mode. Use with {@link #setCacheMode}. 137 * 138 * @deprecated This value is obsolete, as from API level 139 * {@link android.os.Build.VERSION_CODES#HONEYCOMB} and onwards it has the 140 * same effect as {@link #LOAD_DEFAULT}. 141 */ 142 @Deprecated 143 public static final int LOAD_NORMAL = 0; 144 145 /** 146 * Use cached resources when they are available, even if they have expired. 147 * Otherwise load resources from the network. 148 * Use with {@link #setCacheMode}. 149 */ 150 public static final int LOAD_CACHE_ELSE_NETWORK = 1; 151 152 /** 153 * Don't use the cache, load from the network. 154 * Use with {@link #setCacheMode}. 155 */ 156 public static final int LOAD_NO_CACHE = 2; 157 158 /** 159 * Don't use the network, load from the cache. 160 * Use with {@link #setCacheMode}. 161 */ 162 public static final int LOAD_CACHE_ONLY = 3; 163 164 public enum RenderPriority { 165 NORMAL, 166 HIGH, 167 LOW 168 } 169 170 /** 171 * The plugin state effects how plugins are treated on a page. ON means 172 * that any object will be loaded even if a plugin does not exist to handle 173 * the content. ON_DEMAND means that if there is a plugin installed that 174 * can handle the content, a placeholder is shown until the user clicks on 175 * the placeholder. Once clicked, the plugin will be enabled on the page. 176 * OFF means that all plugins will be turned off and any fallback content 177 * will be used. 178 */ 179 public enum PluginState { 180 ON, 181 ON_DEMAND, 182 OFF 183 } 184 185 /** 186 * Used with {@link #setMixedContentMode} 187 * 188 * In this mode, the WebView will allow a secure origin to load content from any other origin, 189 * even if that origin is insecure. This is the least secure mode of operation for the WebView, 190 * and where possible apps should not set this mode. 191 */ 192 public static final int MIXED_CONTENT_ALWAYS_ALLOW = 0; 193 194 /** 195 * Used with {@link #setMixedContentMode} 196 * 197 * In this mode, the WebView will not allow a secure origin to load content from an insecure 198 * origin. This is the preferred and most secure mode of operation for the WebView and apps are 199 * strongly advised to use this mode. 200 */ 201 public static final int MIXED_CONTENT_NEVER_ALLOW = 1; 202 203 /** 204 * Used with {@link #setMixedContentMode} 205 * 206 * In this mode, the WebView will attempt to be compatible with the approach of a modern web 207 * browser with regard to mixed content. Some insecure content may be allowed to be loaded by 208 * a secure origin and other types of content will be blocked. The types of content are allowed 209 * or blocked may change release to release and are not explicitly defined. 210 * 211 * This mode is intended to be used by apps that are not in control of the content that they 212 * render but desire to operate in a reasonably secure environment. For highest security, apps 213 * are recommended to use {@link #MIXED_CONTENT_NEVER_ALLOW}. 214 */ 215 public static final int MIXED_CONTENT_COMPATIBILITY_MODE = 2; 216 217 /** 218 * Enables dumping the pages navigation cache to a text file. The default 219 * is false. 220 * 221 * @deprecated This method is now obsolete. 222 * @hide Since API level {@link android.os.Build.VERSION_CODES#JELLY_BEAN_MR1} 223 */ 224 @SystemApi 225 @Deprecated 226 public abstract void setNavDump(boolean enabled); 227 228 /** 229 * Gets whether dumping the navigation cache is enabled. 230 * 231 * @return whether dumping the navigation cache is enabled 232 * @see #setNavDump 233 * @deprecated This method is now obsolete. 234 * @hide Since API level {@link android.os.Build.VERSION_CODES#JELLY_BEAN_MR1} 235 */ 236 @SystemApi 237 @Deprecated 238 public abstract boolean getNavDump(); 239 240 /** 241 * Sets whether the WebView should support zooming using its on-screen zoom 242 * controls and gestures. The particular zoom mechanisms that should be used 243 * can be set with {@link #setBuiltInZoomControls}. This setting does not 244 * affect zooming performed using the {@link WebView#zoomIn()} and 245 * {@link WebView#zoomOut()} methods. The default is true. 246 * 247 * @param support whether the WebView should support zoom 248 */ 249 public abstract void setSupportZoom(boolean support); 250 251 /** 252 * Gets whether the WebView supports zoom. 253 * 254 * @return true if the WebView supports zoom 255 * @see #setSupportZoom 256 */ 257 public abstract boolean supportZoom(); 258 259 /** 260 * Sets whether the WebView requires a user gesture to play media. 261 * The default is true. 262 * 263 * @param require whether the WebView requires a user gesture to play media 264 */ 265 public abstract void setMediaPlaybackRequiresUserGesture(boolean require); 266 267 /** 268 * Gets whether the WebView requires a user gesture to play media. 269 * 270 * @return true if the WebView requires a user gesture to play media 271 * @see #setMediaPlaybackRequiresUserGesture 272 */ 273 public abstract boolean getMediaPlaybackRequiresUserGesture(); 274 275 /** 276 * Sets whether the WebView should use its built-in zoom mechanisms. The 277 * built-in zoom mechanisms comprise on-screen zoom controls, which are 278 * displayed over the WebView's content, and the use of a pinch gesture to 279 * control zooming. Whether or not these on-screen controls are displayed 280 * can be set with {@link #setDisplayZoomControls}. The default is false. 281 * <p> 282 * The built-in mechanisms are the only currently supported zoom 283 * mechanisms, so it is recommended that this setting is always enabled. 284 * 285 * @param enabled whether the WebView should use its built-in zoom mechanisms 286 */ 287 // This method was intended to select between the built-in zoom mechanisms 288 // and the separate zoom controls. The latter were obtained using 289 // {@link WebView#getZoomControls}, which is now hidden. 290 public abstract void setBuiltInZoomControls(boolean enabled); 291 292 /** 293 * Gets whether the zoom mechanisms built into WebView are being used. 294 * 295 * @return true if the zoom mechanisms built into WebView are being used 296 * @see #setBuiltInZoomControls 297 */ 298 public abstract boolean getBuiltInZoomControls(); 299 300 /** 301 * Sets whether the WebView should display on-screen zoom controls when 302 * using the built-in zoom mechanisms. See {@link #setBuiltInZoomControls}. 303 * The default is true. 304 * 305 * @param enabled whether the WebView should display on-screen zoom controls 306 */ 307 public abstract void setDisplayZoomControls(boolean enabled); 308 309 /** 310 * Gets whether the WebView displays on-screen zoom controls when using 311 * the built-in zoom mechanisms. 312 * 313 * @return true if the WebView displays on-screen zoom controls when using 314 * the built-in zoom mechanisms 315 * @see #setDisplayZoomControls 316 */ 317 public abstract boolean getDisplayZoomControls(); 318 319 /** 320 * Enables or disables file access within WebView. File access is enabled by 321 * default. Note that this enables or disables file system access only. 322 * Assets and resources are still accessible using file:///android_asset and 323 * file:///android_res. 324 */ 325 public abstract void setAllowFileAccess(boolean allow); 326 327 /** 328 * Gets whether this WebView supports file access. 329 * 330 * @see #setAllowFileAccess 331 */ 332 public abstract boolean getAllowFileAccess(); 333 334 /** 335 * Enables or disables content URL access within WebView. Content URL 336 * access allows WebView to load content from a content provider installed 337 * in the system. The default is enabled. 338 */ 339 public abstract void setAllowContentAccess(boolean allow); 340 341 /** 342 * Gets whether this WebView supports content URL access. 343 * 344 * @see #setAllowContentAccess 345 */ 346 public abstract boolean getAllowContentAccess(); 347 348 /** 349 * Sets whether the WebView loads pages in overview mode, that is, 350 * zooms out the content to fit on screen by width. This setting is 351 * taken into account when the content width is greater than the width 352 * of the WebView control, for example, when {@link #getUseWideViewPort} 353 * is enabled. The default is false. 354 */ 355 public abstract void setLoadWithOverviewMode(boolean overview); 356 357 /** 358 * Gets whether this WebView loads pages in overview mode. 359 * 360 * @return whether this WebView loads pages in overview mode 361 * @see #setLoadWithOverviewMode 362 */ 363 public abstract boolean getLoadWithOverviewMode(); 364 365 /** 366 * Sets whether the WebView will enable smooth transition while panning or 367 * zooming or while the window hosting the WebView does not have focus. 368 * If it is true, WebView will choose a solution to maximize the performance. 369 * e.g. the WebView's content may not be updated during the transition. 370 * If it is false, WebView will keep its fidelity. The default value is false. 371 * 372 * @deprecated This method is now obsolete, and will become a no-op in future. 373 */ 374 @Deprecated 375 public abstract void setEnableSmoothTransition(boolean enable); 376 377 /** 378 * Gets whether the WebView enables smooth transition while panning or 379 * zooming. 380 * 381 * @see #setEnableSmoothTransition 382 * 383 * @deprecated This method is now obsolete, and will become a no-op in future. 384 */ 385 @Deprecated 386 public abstract boolean enableSmoothTransition(); 387 388 /** 389 * Sets whether the WebView uses its background for over scroll background. 390 * If true, it will use the WebView's background. If false, it will use an 391 * internal pattern. Default is true. 392 * 393 * @deprecated This method is now obsolete. 394 * @hide Since API level {@link android.os.Build.VERSION_CODES#JELLY_BEAN_MR1} 395 */ 396 @SystemApi 397 @Deprecated 398 public abstract void setUseWebViewBackgroundForOverscrollBackground(boolean view); 399 400 /** 401 * Gets whether this WebView uses WebView's background instead of 402 * internal pattern for over scroll background. 403 * 404 * @see #setUseWebViewBackgroundForOverscrollBackground 405 * @deprecated This method is now obsolete. 406 * @hide Since API level {@link android.os.Build.VERSION_CODES#JELLY_BEAN_MR1} 407 */ 408 @SystemApi 409 @Deprecated 410 public abstract boolean getUseWebViewBackgroundForOverscrollBackground(); 411 412 /** 413 * Sets whether the WebView should save form data. The default is true. 414 */ 415 public abstract void setSaveFormData(boolean save); 416 417 /** 418 * Gets whether the WebView saves form data. 419 * 420 * @return whether the WebView saves form data 421 * @see #setSaveFormData 422 */ 423 public abstract boolean getSaveFormData(); 424 425 /** 426 * Sets whether the WebView should save passwords. The default is true. 427 * @deprecated Saving passwords in WebView will not be supported in future versions. 428 */ 429 @Deprecated 430 public abstract void setSavePassword(boolean save); 431 432 /** 433 * Gets whether the WebView saves passwords. 434 * 435 * @return whether the WebView saves passwords 436 * @see #setSavePassword 437 * @deprecated Saving passwords in WebView will not be supported in future versions. 438 */ 439 @Deprecated 440 public abstract boolean getSavePassword(); 441 442 /** 443 * Sets the text zoom of the page in percent. The default is 100. 444 * 445 * @param textZoom the text zoom in percent 446 */ 447 public abstract void setTextZoom(int textZoom); 448 449 /** 450 * Gets the text zoom of the page in percent. 451 * 452 * @return the text zoom of the page in percent 453 * @see #setTextZoom 454 */ 455 public abstract int getTextZoom(); 456 457 /** 458 * Sets policy for third party cookies. 459 * Developers should access this via {@link CookieManager#setShouldAcceptThirdPartyCookies}. 460 * @hide Internal API. 461 */ 462 @SystemApi 463 public abstract void setAcceptThirdPartyCookies(boolean accept); 464 465 /** 466 * Gets policy for third party cookies. 467 * Developers should access this via {@link CookieManager#getShouldAcceptThirdPartyCookies}. 468 * @hide Internal API 469 */ 470 @SystemApi 471 public abstract boolean getAcceptThirdPartyCookies(); 472 473 /** 474 * Sets the text size of the page. The default is {@link TextSize#NORMAL}. 475 * 476 * @param t the text size as a {@link TextSize} value 477 * @deprecated Use {@link #setTextZoom} instead. 478 */ 479 public synchronized void setTextSize(TextSize t) { 480 setTextZoom(t.value); 481 } 482 483 /** 484 * Gets the text size of the page. If the text size was previously specified 485 * in percent using {@link #setTextZoom}, this will return the closest 486 * matching {@link TextSize}. 487 * 488 * @return the text size as a {@link TextSize} value 489 * @see #setTextSize 490 * @deprecated Use {@link #getTextZoom} instead. 491 */ 492 public synchronized TextSize getTextSize() { 493 TextSize closestSize = null; 494 int smallestDelta = Integer.MAX_VALUE; 495 int textSize = getTextZoom(); 496 for (TextSize size : TextSize.values()) { 497 int delta = Math.abs(textSize - size.value); 498 if (delta == 0) { 499 return size; 500 } 501 if (delta < smallestDelta) { 502 smallestDelta = delta; 503 closestSize = size; 504 } 505 } 506 return closestSize != null ? closestSize : TextSize.NORMAL; 507 } 508 509 /** 510 * Sets the default zoom density of the page. This must be called from the UI 511 * thread. The default is {@link ZoomDensity#MEDIUM}. 512 * 513 * This setting is not recommended for use in new applications. If the WebView 514 * is utilized to display mobile-oriented pages, the desired effect can be achieved by 515 * adjusting 'width' and 'initial-scale' attributes of page's 'meta viewport' 516 * tag. For pages lacking the tag, {@link android.webkit.WebView#setInitialScale} 517 * and {@link #setUseWideViewPort} can be used. 518 * 519 * @param zoom the zoom density 520 * @deprecated This method is no longer supported, see the function documentation for 521 * recommended alternatives. 522 */ 523 @Deprecated 524 public abstract void setDefaultZoom(ZoomDensity zoom); 525 526 /** 527 * Gets the default zoom density of the page. This should be called from 528 * the UI thread. 529 * 530 * This setting is not recommended for use in new applications. 531 * 532 * @return the zoom density 533 * @see #setDefaultZoom 534 * @deprecated Will only return the default value. 535 */ 536 public abstract ZoomDensity getDefaultZoom(); 537 538 /** 539 * Enables using light touches to make a selection and activate mouseovers. 540 * @deprecated From {@link android.os.Build.VERSION_CODES#JELLY_BEAN} this 541 * setting is obsolete and has no effect. 542 */ 543 @Deprecated 544 public abstract void setLightTouchEnabled(boolean enabled); 545 546 /** 547 * Gets whether light touches are enabled. 548 * @see #setLightTouchEnabled 549 * @deprecated This setting is obsolete. 550 */ 551 @Deprecated 552 public abstract boolean getLightTouchEnabled(); 553 554 /** 555 * Controlled a rendering optimization that is no longer present. Setting 556 * it now has no effect. 557 * 558 * @deprecated This setting now has no effect. 559 * @hide Since API level {@link android.os.Build.VERSION_CODES#JELLY_BEAN_MR1} 560 */ 561 @Deprecated 562 public void setUseDoubleTree(boolean use) { 563 // Specified to do nothing, so no need for derived classes to override. 564 } 565 566 /** 567 * Controlled a rendering optimization that is no longer present. Setting 568 * it now has no effect. 569 * 570 * @deprecated This setting now has no effect. 571 * @hide Since API level {@link android.os.Build.VERSION_CODES#JELLY_BEAN_MR1} 572 */ 573 @Deprecated 574 public boolean getUseDoubleTree() { 575 // Returns false unconditionally, so no need for derived classes to override. 576 return false; 577 } 578 579 /** 580 * Sets the user-agent string using an integer code. 581 * <ul> 582 * <li>0 means the WebView should use an Android user-agent string</li> 583 * <li>1 means the WebView should use a desktop user-agent string</li> 584 * </ul> 585 * Other values are ignored. The default is an Android user-agent string, 586 * i.e. code value 0. 587 * 588 * @param ua the integer code for the user-agent string 589 * @deprecated Please use {@link #setUserAgentString} instead. 590 * @hide Since API level {@link android.os.Build.VERSION_CODES#JELLY_BEAN_MR1} 591 */ 592 @SystemApi 593 @Deprecated 594 public abstract void setUserAgent(int ua); 595 596 /** 597 * Gets the user-agent as an integer code. 598 * <ul> 599 * <li>-1 means the WebView is using a custom user-agent string set with 600 * {@link #setUserAgentString}</li> 601 * <li>0 means the WebView should use an Android user-agent string</li> 602 * <li>1 means the WebView should use a desktop user-agent string</li> 603 * </ul> 604 * 605 * @return the integer code for the user-agent string 606 * @see #setUserAgent 607 * @deprecated Please use {@link #getUserAgentString} instead. 608 * @hide Since API level {@link android.os.Build.VERSION_CODES#JELLY_BEAN_MR1} 609 */ 610 @SystemApi 611 @Deprecated 612 public abstract int getUserAgent(); 613 614 /** 615 * Sets whether the WebView should enable support for the "viewport" 616 * HTML meta tag or should use a wide viewport. 617 * When the value of the setting is false, the layout width is always set to the 618 * width of the WebView control in device-independent (CSS) pixels. 619 * When the value is true and the page contains the viewport meta tag, the value 620 * of the width specified in the tag is used. If the page does not contain the tag or 621 * does not provide a width, then a wide viewport will be used. 622 * 623 * @param use whether to enable support for the viewport meta tag 624 */ 625 public abstract void setUseWideViewPort(boolean use); 626 627 /** 628 * Gets whether the WebView supports the "viewport" 629 * HTML meta tag or will use a wide viewport. 630 * 631 * @return true if the WebView supports the viewport meta tag 632 * @see #setUseWideViewPort 633 */ 634 public abstract boolean getUseWideViewPort(); 635 636 /** 637 * Sets whether the WebView whether supports multiple windows. If set to 638 * true, {@link WebChromeClient#onCreateWindow} must be implemented by the 639 * host application. The default is false. 640 * 641 * @param support whether to suport multiple windows 642 */ 643 public abstract void setSupportMultipleWindows(boolean support); 644 645 /** 646 * Gets whether the WebView supports multiple windows. 647 * 648 * @return true if the WebView supports multiple windows 649 * @see #setSupportMultipleWindows 650 */ 651 public abstract boolean supportMultipleWindows(); 652 653 /** 654 * Sets the underlying layout algorithm. This will cause a relayout of the 655 * WebView. The default is {@link LayoutAlgorithm#NARROW_COLUMNS}. 656 * 657 * @param l the layout algorithm to use, as a {@link LayoutAlgorithm} value 658 */ 659 public abstract void setLayoutAlgorithm(LayoutAlgorithm l); 660 661 /** 662 * Gets the current layout algorithm. 663 * 664 * @return the layout algorithm in use, as a {@link LayoutAlgorithm} value 665 * @see #setLayoutAlgorithm 666 */ 667 public abstract LayoutAlgorithm getLayoutAlgorithm(); 668 669 /** 670 * Sets the standard font family name. The default is "sans-serif". 671 * 672 * @param font a font family name 673 */ 674 public abstract void setStandardFontFamily(String font); 675 676 /** 677 * Gets the standard font family name. 678 * 679 * @return the standard font family name as a string 680 * @see #setStandardFontFamily 681 */ 682 public abstract String getStandardFontFamily(); 683 684 /** 685 * Sets the fixed font family name. The default is "monospace". 686 * 687 * @param font a font family name 688 */ 689 public abstract void setFixedFontFamily(String font); 690 691 /** 692 * Gets the fixed font family name. 693 * 694 * @return the fixed font family name as a string 695 * @see #setFixedFontFamily 696 */ 697 public abstract String getFixedFontFamily(); 698 699 /** 700 * Sets the sans-serif font family name. The default is "sans-serif". 701 * 702 * @param font a font family name 703 */ 704 public abstract void setSansSerifFontFamily(String font); 705 706 /** 707 * Gets the sans-serif font family name. 708 * 709 * @return the sans-serif font family name as a string 710 * @see #setSansSerifFontFamily 711 */ 712 public abstract String getSansSerifFontFamily(); 713 714 /** 715 * Sets the serif font family name. The default is "sans-serif". 716 * 717 * @param font a font family name 718 */ 719 public abstract void setSerifFontFamily(String font); 720 721 /** 722 * Gets the serif font family name. The default is "serif". 723 * 724 * @return the serif font family name as a string 725 * @see #setSerifFontFamily 726 */ 727 public abstract String getSerifFontFamily(); 728 729 /** 730 * Sets the cursive font family name. The default is "cursive". 731 * 732 * @param font a font family name 733 */ 734 public abstract void setCursiveFontFamily(String font); 735 736 /** 737 * Gets the cursive font family name. 738 * 739 * @return the cursive font family name as a string 740 * @see #setCursiveFontFamily 741 */ 742 public abstract String getCursiveFontFamily(); 743 744 /** 745 * Sets the fantasy font family name. The default is "fantasy". 746 * 747 * @param font a font family name 748 */ 749 public abstract void setFantasyFontFamily(String font); 750 751 /** 752 * Gets the fantasy font family name. 753 * 754 * @return the fantasy font family name as a string 755 * @see #setFantasyFontFamily 756 */ 757 public abstract String getFantasyFontFamily(); 758 759 /** 760 * Sets the minimum font size. The default is 8. 761 * 762 * @param size a non-negative integer between 1 and 72. Any number outside 763 * the specified range will be pinned. 764 */ 765 public abstract void setMinimumFontSize(int size); 766 767 /** 768 * Gets the minimum font size. 769 * 770 * @return a non-negative integer between 1 and 72 771 * @see #setMinimumFontSize 772 */ 773 public abstract int getMinimumFontSize(); 774 775 /** 776 * Sets the minimum logical font size. The default is 8. 777 * 778 * @param size a non-negative integer between 1 and 72. Any number outside 779 * the specified range will be pinned. 780 */ 781 public abstract void setMinimumLogicalFontSize(int size); 782 783 /** 784 * Gets the minimum logical font size. 785 * 786 * @return a non-negative integer between 1 and 72 787 * @see #setMinimumLogicalFontSize 788 */ 789 public abstract int getMinimumLogicalFontSize(); 790 791 /** 792 * Sets the default font size. The default is 16. 793 * 794 * @param size a non-negative integer between 1 and 72. Any number outside 795 * the specified range will be pinned. 796 */ 797 public abstract void setDefaultFontSize(int size); 798 799 /** 800 * Gets the default font size. 801 * 802 * @return a non-negative integer between 1 and 72 803 * @see #setDefaultFontSize 804 */ 805 public abstract int getDefaultFontSize(); 806 807 /** 808 * Sets the default fixed font size. The default is 16. 809 * 810 * @param size a non-negative integer between 1 and 72. Any number outside 811 * the specified range will be pinned. 812 */ 813 public abstract void setDefaultFixedFontSize(int size); 814 815 /** 816 * Gets the default fixed font size. 817 * 818 * @return a non-negative integer between 1 and 72 819 * @see #setDefaultFixedFontSize 820 */ 821 public abstract int getDefaultFixedFontSize(); 822 823 /** 824 * Sets whether the WebView should load image resources. Note that this method 825 * controls loading of all images, including those embedded using the data 826 * URI scheme. Use {@link #setBlockNetworkImage} to control loading only 827 * of images specified using network URI schemes. Note that if the value of this 828 * setting is changed from false to true, all images resources referenced 829 * by content currently displayed by the WebView are loaded automatically. 830 * The default is true. 831 * 832 * @param flag whether the WebView should load image resources 833 */ 834 public abstract void setLoadsImagesAutomatically(boolean flag); 835 836 /** 837 * Gets whether the WebView loads image resources. This includes 838 * images embedded using the data URI scheme. 839 * 840 * @return true if the WebView loads image resources 841 * @see #setLoadsImagesAutomatically 842 */ 843 public abstract boolean getLoadsImagesAutomatically(); 844 845 /** 846 * Sets whether the WebView should not load image resources from the 847 * network (resources accessed via http and https URI schemes). Note 848 * that this method has no effect unless 849 * {@link #getLoadsImagesAutomatically} returns true. Also note that 850 * disabling all network loads using {@link #setBlockNetworkLoads} 851 * will also prevent network images from loading, even if this flag is set 852 * to false. When the value of this setting is changed from true to false, 853 * network images resources referenced by content currently displayed by 854 * the WebView are fetched automatically. The default is false. 855 * 856 * @param flag whether the WebView should not load image resources from the 857 * network 858 * @see #setBlockNetworkLoads 859 */ 860 public abstract void setBlockNetworkImage(boolean flag); 861 862 /** 863 * Gets whether the WebView does not load image resources from the network. 864 * 865 * @return true if the WebView does not load image resources from the network 866 * @see #setBlockNetworkImage 867 */ 868 public abstract boolean getBlockNetworkImage(); 869 870 /** 871 * Sets whether the WebView should not load resources from the network. 872 * Use {@link #setBlockNetworkImage} to only avoid loading 873 * image resources. Note that if the value of this setting is 874 * changed from true to false, network resources referenced by content 875 * currently displayed by the WebView are not fetched until 876 * {@link android.webkit.WebView#reload} is called. 877 * If the application does not have the 878 * {@link android.Manifest.permission#INTERNET} permission, attempts to set 879 * a value of false will cause a {@link java.lang.SecurityException} 880 * to be thrown. The default value is false if the application has the 881 * {@link android.Manifest.permission#INTERNET} permission, otherwise it is 882 * true. 883 * 884 * @param flag true means block network loads by the WebView 885 * @see android.webkit.WebView#reload 886 */ 887 public abstract void setBlockNetworkLoads(boolean flag); 888 889 /** 890 * Gets whether the WebView does not load any resources from the network. 891 * 892 * @return true if the WebView does not load any resources from the network 893 * @see #setBlockNetworkLoads 894 */ 895 public abstract boolean getBlockNetworkLoads(); 896 897 /** 898 * Tells the WebView to enable JavaScript execution. 899 * <b>The default is false.</b> 900 * 901 * @param flag true if the WebView should execute JavaScript 902 */ 903 public abstract void setJavaScriptEnabled(boolean flag); 904 905 /** 906 * Sets whether JavaScript running in the context of a file scheme URL 907 * should be allowed to access content from any origin. This includes 908 * access to content from other file scheme URLs. See 909 * {@link #setAllowFileAccessFromFileURLs}. To enable the most restrictive, 910 * and therefore secure policy, this setting should be disabled. 911 * Note that this setting affects only JavaScript access to file scheme 912 * resources. Other access to such resources, for example, from image HTML 913 * elements, is unaffected. To prevent possible violation of same domain policy 914 * on {@link android.os.Build.VERSION_CODES#ICE_CREAM_SANDWICH} and earlier 915 * devices, you should explicitly set this value to {@code false}. 916 * <p> 917 * The default value is true for API level 918 * {@link android.os.Build.VERSION_CODES#ICE_CREAM_SANDWICH_MR1} and below, 919 * and false for API level {@link android.os.Build.VERSION_CODES#JELLY_BEAN} 920 * and above. 921 * 922 * @param flag whether JavaScript running in the context of a file scheme 923 * URL should be allowed to access content from any origin 924 */ 925 public abstract void setAllowUniversalAccessFromFileURLs(boolean flag); 926 927 /** 928 * Sets whether JavaScript running in the context of a file scheme URL 929 * should be allowed to access content from other file scheme URLs. To 930 * enable the most restrictive, and therefore secure policy, this setting 931 * should be disabled. Note that the value of this setting is ignored if 932 * the value of {@link #getAllowUniversalAccessFromFileURLs} is true. 933 * Note too, that this setting affects only JavaScript access to file scheme 934 * resources. Other access to such resources, for example, from image HTML 935 * elements, is unaffected. To prevent possible violation of same domain policy 936 * on {@link android.os.Build.VERSION_CODES#ICE_CREAM_SANDWICH} and earlier 937 * devices, you should explicitly set this value to {@code false}. 938 * <p> 939 * The default value is true for API level 940 * {@link android.os.Build.VERSION_CODES#ICE_CREAM_SANDWICH_MR1} and below, 941 * and false for API level {@link android.os.Build.VERSION_CODES#JELLY_BEAN} 942 * and above. 943 * 944 * @param flag whether JavaScript running in the context of a file scheme 945 * URL should be allowed to access content from other file 946 * scheme URLs 947 */ 948 public abstract void setAllowFileAccessFromFileURLs(boolean flag); 949 950 /** 951 * Sets whether the WebView should enable plugins. The default is false. 952 * 953 * @param flag true if plugins should be enabled 954 * @deprecated This method has been deprecated in favor of 955 * {@link #setPluginState} 956 * @hide Since API level {@link android.os.Build.VERSION_CODES#JELLY_BEAN_MR2} 957 */ 958 @SystemApi 959 @Deprecated 960 public abstract void setPluginsEnabled(boolean flag); 961 962 /** 963 * Tells the WebView to enable, disable, or have plugins on demand. On 964 * demand mode means that if a plugin exists that can handle the embedded 965 * content, a placeholder icon will be shown instead of the plugin. When 966 * the placeholder is clicked, the plugin will be enabled. The default is 967 * {@link PluginState#OFF}. 968 * 969 * @param state a PluginState value 970 * @deprecated Plugins will not be supported in future, and should not be used. 971 */ 972 @Deprecated 973 public abstract void setPluginState(PluginState state); 974 975 /** 976 * Sets a custom path to plugins used by the WebView. This method is 977 * obsolete since each plugin is now loaded from its own package. 978 * 979 * @param pluginsPath a String path to the directory containing plugins 980 * @deprecated This method is no longer used as plugins are loaded from 981 * their own APK via the system's package manager. 982 * @hide Since API level {@link android.os.Build.VERSION_CODES#JELLY_BEAN_MR2} 983 */ 984 @Deprecated 985 public void setPluginsPath(String pluginsPath) { 986 // Specified to do nothing, so no need for derived classes to override. 987 } 988 989 /** 990 * Sets the path to where database storage API databases should be saved. 991 * In order for the database storage API to function correctly, this method 992 * must be called with a path to which the application can write. This 993 * method should only be called once: repeated calls are ignored. 994 * 995 * @param databasePath a path to the directory where databases should be 996 * saved. 997 * @deprecated Database paths are managed by the implementation and calling this method 998 * will have no effect. 999 */ 1000 @Deprecated 1001 public abstract void setDatabasePath(String databasePath); 1002 1003 /** 1004 * Sets the path where the Geolocation databases should be saved. In order 1005 * for Geolocation permissions and cached positions to be persisted, this 1006 * method must be called with a path to which the application can write. 1007 * 1008 * @param databasePath a path to the directory where databases should be 1009 * saved. 1010 * @deprecated Geolocation database are managed by the implementation and calling this method 1011 * will have no effect. 1012 */ 1013 @Deprecated 1014 public abstract void setGeolocationDatabasePath(String databasePath); 1015 1016 /** 1017 * Sets whether the Application Caches API should be enabled. The default 1018 * is false. Note that in order for the Application Caches API to be 1019 * enabled, a valid database path must also be supplied to 1020 * {@link #setAppCachePath}. 1021 * 1022 * @param flag true if the WebView should enable Application Caches 1023 */ 1024 public abstract void setAppCacheEnabled(boolean flag); 1025 1026 /** 1027 * Sets the path to the Application Caches files. In order for the 1028 * Application Caches API to be enabled, this method must be called with a 1029 * path to which the application can write. This method should only be 1030 * called once: repeated calls are ignored. 1031 * 1032 * @param appCachePath a String path to the directory containing 1033 * Application Caches files. 1034 * @see #setAppCacheEnabled 1035 */ 1036 public abstract void setAppCachePath(String appCachePath); 1037 1038 /** 1039 * Sets the maximum size for the Application Cache content. The passed size 1040 * will be rounded to the nearest value that the database can support, so 1041 * this should be viewed as a guide, not a hard limit. Setting the 1042 * size to a value less than current database size does not cause the 1043 * database to be trimmed. The default size is {@link Long#MAX_VALUE}. 1044 * It is recommended to leave the maximum size set to the default value. 1045 * 1046 * @param appCacheMaxSize the maximum size in bytes 1047 * @deprecated In future quota will be managed automatically. 1048 */ 1049 @Deprecated 1050 public abstract void setAppCacheMaxSize(long appCacheMaxSize); 1051 1052 /** 1053 * Sets whether the database storage API is enabled. The default value is 1054 * false. See also {@link #setDatabasePath} for how to correctly set up the 1055 * database storage API. 1056 * 1057 * This setting is global in effect, across all WebView instances in a process. 1058 * Note you should only modify this setting prior to making <b>any</b> WebView 1059 * page load within a given process, as the WebView implementation may ignore 1060 * changes to this setting after that point. 1061 * 1062 * @param flag true if the WebView should use the database storage API 1063 */ 1064 public abstract void setDatabaseEnabled(boolean flag); 1065 1066 /** 1067 * Sets whether the DOM storage API is enabled. The default value is false. 1068 * 1069 * @param flag true if the WebView should use the DOM storage API 1070 */ 1071 public abstract void setDomStorageEnabled(boolean flag); 1072 1073 /** 1074 * Gets whether the DOM Storage APIs are enabled. 1075 * 1076 * @return true if the DOM Storage APIs are enabled 1077 * @see #setDomStorageEnabled 1078 */ 1079 public abstract boolean getDomStorageEnabled(); 1080 1081 /** 1082 * Gets the path to where database storage API databases are saved. 1083 * 1084 * @return the String path to the database storage API databases 1085 * @see #setDatabasePath 1086 * @deprecated Database paths are managed by the implementation this method is obsolete. 1087 */ 1088 @Deprecated 1089 public abstract String getDatabasePath(); 1090 1091 /** 1092 * Gets whether the database storage API is enabled. 1093 * 1094 * @return true if the database storage API is enabled 1095 * @see #setDatabaseEnabled 1096 */ 1097 public abstract boolean getDatabaseEnabled(); 1098 1099 /** 1100 * Sets whether Geolocation is enabled. The default is true. 1101 * <p> 1102 * Please note that in order for the Geolocation API to be usable 1103 * by a page in the WebView, the following requirements must be met: 1104 * <ul> 1105 * <li>an application must have permission to access the device location, 1106 * see {@link android.Manifest.permission#ACCESS_COARSE_LOCATION}, 1107 * {@link android.Manifest.permission#ACCESS_FINE_LOCATION}; 1108 * <li>an application must provide an implementation of the 1109 * {@link WebChromeClient#onGeolocationPermissionsShowPrompt} callback 1110 * to receive notifications that a page is requesting access to location 1111 * via the JavaScript Geolocation API. 1112 * </ul> 1113 * <p> 1114 * 1115 * @param flag whether Geolocation should be enabled 1116 */ 1117 public abstract void setGeolocationEnabled(boolean flag); 1118 1119 /** 1120 * Gets whether JavaScript is enabled. 1121 * 1122 * @return true if JavaScript is enabled 1123 * @see #setJavaScriptEnabled 1124 */ 1125 public abstract boolean getJavaScriptEnabled(); 1126 1127 /** 1128 * Gets whether JavaScript running in the context of a file scheme URL can 1129 * access content from any origin. This includes access to content from 1130 * other file scheme URLs. 1131 * 1132 * @return whether JavaScript running in the context of a file scheme URL 1133 * can access content from any origin 1134 * @see #setAllowUniversalAccessFromFileURLs 1135 */ 1136 public abstract boolean getAllowUniversalAccessFromFileURLs(); 1137 1138 /** 1139 * Gets whether JavaScript running in the context of a file scheme URL can 1140 * access content from other file scheme URLs. 1141 * 1142 * @return whether JavaScript running in the context of a file scheme URL 1143 * can access content from other file scheme URLs 1144 * @see #setAllowFileAccessFromFileURLs 1145 */ 1146 public abstract boolean getAllowFileAccessFromFileURLs(); 1147 1148 /** 1149 * Gets whether plugins are enabled. 1150 * 1151 * @return true if plugins are enabled 1152 * @see #setPluginsEnabled 1153 * @deprecated This method has been replaced by {@link #getPluginState} 1154 * @hide Since API level {@link android.os.Build.VERSION_CODES#JELLY_BEAN_MR2} 1155 */ 1156 @SystemApi 1157 @Deprecated 1158 public abstract boolean getPluginsEnabled(); 1159 1160 /** 1161 * Gets the current state regarding whether plugins are enabled. 1162 * 1163 * @return the plugin state as a {@link PluginState} value 1164 * @see #setPluginState 1165 * @deprecated Plugins will not be supported in future, and should not be used. 1166 */ 1167 @Deprecated 1168 public abstract PluginState getPluginState(); 1169 1170 /** 1171 * Gets the directory that contains the plugin libraries. This method is 1172 * obsolete since each plugin is now loaded from its own package. 1173 * 1174 * @return an empty string 1175 * @deprecated This method is no longer used as plugins are loaded from 1176 * their own APK via the system's package manager. 1177 * @hide Since API level {@link android.os.Build.VERSION_CODES#JELLY_BEAN_MR2} 1178 */ 1179 @Deprecated 1180 public String getPluginsPath() { 1181 // Unconditionally returns empty string, so no need for derived classes to override. 1182 return ""; 1183 } 1184 1185 /** 1186 * Tells JavaScript to open windows automatically. This applies to the 1187 * JavaScript function window.open(). The default is false. 1188 * 1189 * @param flag true if JavaScript can open windows automatically 1190 */ 1191 public abstract void setJavaScriptCanOpenWindowsAutomatically(boolean flag); 1192 1193 /** 1194 * Gets whether JavaScript can open windows automatically. 1195 * 1196 * @return true if JavaScript can open windows automatically during 1197 * window.open() 1198 * @see #setJavaScriptCanOpenWindowsAutomatically 1199 */ 1200 public abstract boolean getJavaScriptCanOpenWindowsAutomatically(); 1201 1202 /** 1203 * Sets the default text encoding name to use when decoding html pages. 1204 * The default is "UTF-8". 1205 * 1206 * @param encoding the text encoding name 1207 */ 1208 public abstract void setDefaultTextEncodingName(String encoding); 1209 1210 /** 1211 * Gets the default text encoding name. 1212 * 1213 * @return the default text encoding name as a string 1214 * @see #setDefaultTextEncodingName 1215 */ 1216 public abstract String getDefaultTextEncodingName(); 1217 1218 /** 1219 * Sets the WebView's user-agent string. If the string is null or empty, 1220 * the system default value will be used. 1221 * 1222 * Note that starting from {@link android.os.Build.VERSION_CODES#KITKAT} Android 1223 * version, changing the user-agent while loading a web page causes WebView 1224 * to initiate loading once again. 1225 * 1226 * @param ua new user-agent string 1227 */ 1228 public abstract void setUserAgentString(String ua); 1229 1230 /** 1231 * Gets the WebView's user-agent string. 1232 * 1233 * @return the WebView's user-agent string 1234 * @see #setUserAgentString 1235 */ 1236 public abstract String getUserAgentString(); 1237 1238 /** 1239 * Returns the default User-Agent used by a WebView. 1240 * An instance of WebView could use a different User-Agent if a call 1241 * is made to {@link WebSettings#setUserAgentString(String)}. 1242 * 1243 * @param context a Context object used to access application assets 1244 */ 1245 public static String getDefaultUserAgent(Context context) { 1246 return WebViewFactory.getProvider().getStatics().getDefaultUserAgent(context); 1247 } 1248 1249 /** 1250 * Tells the WebView whether it needs to set a node to have focus when 1251 * {@link WebView#requestFocus(int, android.graphics.Rect)} is called. The 1252 * default value is true. 1253 * 1254 * @param flag whether the WebView needs to set a node 1255 */ 1256 public abstract void setNeedInitialFocus(boolean flag); 1257 1258 /** 1259 * Sets the priority of the Render thread. Unlike the other settings, this 1260 * one only needs to be called once per process. The default value is 1261 * {@link RenderPriority#NORMAL}. 1262 * 1263 * @param priority the priority 1264 * @deprecated It is not recommended to adjust thread priorities, and this will 1265 * not be supported in future versions. 1266 */ 1267 @Deprecated 1268 public abstract void setRenderPriority(RenderPriority priority); 1269 1270 /** 1271 * Overrides the way the cache is used. The way the cache is used is based 1272 * on the navigation type. For a normal page load, the cache is checked 1273 * and content is re-validated as needed. When navigating back, content is 1274 * not revalidated, instead the content is just retrieved from the cache. 1275 * This method allows the client to override this behavior by specifying 1276 * one of {@link #LOAD_DEFAULT}, 1277 * {@link #LOAD_CACHE_ELSE_NETWORK}, {@link #LOAD_NO_CACHE} or 1278 * {@link #LOAD_CACHE_ONLY}. The default value is {@link #LOAD_DEFAULT}. 1279 * 1280 * @param mode the mode to use 1281 */ 1282 public abstract void setCacheMode(@CacheMode int mode); 1283 1284 /** 1285 * Gets the current setting for overriding the cache mode. 1286 * 1287 * @return the current setting for overriding the cache mode 1288 * @see #setCacheMode 1289 */ 1290 @CacheMode 1291 public abstract int getCacheMode(); 1292 1293 /** 1294 * Configures the WebView's behavior when a secure origin attempts to load a resource from an 1295 * insecure origin. 1296 * 1297 * By default, apps that target {@link android.os.Build.VERSION_CODES#KITKAT} or below default 1298 * to {@link #MIXED_CONTENT_ALWAYS_ALLOW}. Apps targeting 1299 * {@link android.os.Build.VERSION_CODES#LOLLIPOP} default to {@link #MIXED_CONTENT_NEVER_ALLOW}. 1300 * 1301 * The preferred and most secure mode of operation for the WebView is 1302 * {@link #MIXED_CONTENT_NEVER_ALLOW} and use of {@link #MIXED_CONTENT_ALWAYS_ALLOW} is 1303 * strongly discouraged. 1304 * 1305 * @param mode The mixed content mode to use. One of {@link #MIXED_CONTENT_NEVER_ALLOW}, 1306 * {@link #MIXED_CONTENT_ALWAYS_ALLOW} or {@link #MIXED_CONTENT_COMPATIBILITY_MODE}. 1307 */ 1308 public abstract void setMixedContentMode(int mode); 1309 1310 /** 1311 * Gets the current behavior of the WebView with regard to loading insecure content from a 1312 * secure origin. 1313 * @return The current setting, one of {@link #MIXED_CONTENT_NEVER_ALLOW}, 1314 * {@link #MIXED_CONTENT_ALWAYS_ALLOW} or {@link #MIXED_CONTENT_COMPATIBILITY_MODE}. 1315 */ 1316 public abstract int getMixedContentMode(); 1317 1318 /** 1319 * Sets whether to use a video overlay for embedded encrypted video. 1320 * In API levels prior to {@link android.os.Build.VERSION_CODES#LOLLIPOP}, encrypted video can 1321 * only be rendered directly on a secure video surface, so it had been a hard problem to play 1322 * encrypted video in HTML. When this flag is on, WebView can play encrypted video (MSE/EME) 1323 * by using a video overlay (aka hole-punching) for videos embedded using HTML <video> 1324 * tag.<br> 1325 * Caution: This setting is intended for use only in a narrow set of circumstances and apps 1326 * should only enable it if they require playback of encrypted video content. It will impose 1327 * the following limitations on the WebView: 1328 * <ul> 1329 * <li> Only one video overlay can be played at a time. 1330 * <li> Changes made to position or dimensions of a video element may be propagated to the 1331 * corresponding video overlay with a noticeable delay. 1332 * <li> The video overlay is not visible to web APIs and as such may not interact with 1333 * script or styling. For example, CSS styles applied to the <video> tag may be ignored. 1334 * </ul> 1335 * This is not an exhaustive set of constraints and it may vary with new versions of the 1336 * WebView. 1337 * @hide 1338 */ 1339 @SystemApi 1340 public abstract void setVideoOverlayForEmbeddedEncryptedVideoEnabled(boolean flag); 1341 1342 /** 1343 * Gets whether a video overlay will be used for embedded encrypted video. 1344 * 1345 * @return true if WebView uses a video overlay for embedded encrypted video. 1346 * @see #setVideoOverlayForEmbeddedEncryptedVideoEnabled 1347 * @hide 1348 */ 1349 @SystemApi 1350 public abstract boolean getVideoOverlayForEmbeddedEncryptedVideoEnabled(); 1351 1352 /** 1353 * Sets whether this WebView should raster tiles when it is 1354 * offscreen but attached to a window. Turning this on can avoid 1355 * rendering artifacts when animating an offscreen WebView on-screen. 1356 * Offscreen WebViews in this mode use more memory. The default value is 1357 * false.<br> 1358 * Please follow these guidelines to limit memory usage: 1359 * <ul> 1360 * <li> WebView size should be not be larger than the device screen size. 1361 * <li> Limit use of this mode to a small number of WebViews. Use it for 1362 * visible WebViews and WebViews about to be animated to visible. 1363 * </ul> 1364 */ 1365 public abstract void setOffscreenPreRaster(boolean enabled); 1366 1367 /** 1368 * Gets whether this WebView should raster tiles when it is 1369 * offscreen but attached to a window. 1370 * @return true if this WebView will raster tiles when it is 1371 * offscreen but attached to a window. 1372 */ 1373 public abstract boolean getOffscreenPreRaster(); 1374 1375 /** 1376 * @hide 1377 */ 1378 @IntDef(flag = true, 1379 value = { 1380 MENU_ITEM_NONE, 1381 MENU_ITEM_SHARE, 1382 MENU_ITEM_WEB_SEARCH, 1383 MENU_ITEM_PROCESS_TEXT 1384 }) 1385 @Retention(RetentionPolicy.SOURCE) 1386 @Target({ElementType.PARAMETER, ElementType.METHOD}) 1387 private @interface MenuItemFlags {} 1388 1389 /** 1390 * Disables the action mode menu items according to {@code menuItems} flag. 1391 * @param menuItems an integer field flag for the menu items to be disabled. 1392 */ 1393 public abstract void setDisabledActionModeMenuItems(@MenuItemFlags int menuItems); 1394 1395 /** 1396 * Gets the action mode menu items that are disabled, expressed in an integer field flag. 1397 * The default value is {@link #MENU_ITEM_NONE} 1398 * 1399 * @return all the disabled menu item flags combined with bitwise OR. 1400 */ 1401 public abstract @MenuItemFlags int getDisabledActionModeMenuItems(); 1402 1403 /** 1404 * Used with {@link #setDisabledActionModeMenuItems}. 1405 * 1406 * No menu items should be disabled. 1407 */ 1408 public static final int MENU_ITEM_NONE = 0; 1409 1410 /** 1411 * Used with {@link #setDisabledActionModeMenuItems}. 1412 * 1413 * Disable menu item "Share". 1414 */ 1415 public static final int MENU_ITEM_SHARE = 1 << 0; 1416 1417 /** 1418 * Used with {@link #setDisabledActionModeMenuItems}. 1419 * 1420 * Disable menu item "Web Search". 1421 */ 1422 public static final int MENU_ITEM_WEB_SEARCH = 1 << 1; 1423 1424 /** 1425 * Used with {@link #setDisabledActionModeMenuItems}. 1426 * 1427 * Disable all the action mode menu items for text processing. 1428 * By default WebView searches for activities that are able to handle 1429 * {@link android.content.Intent#ACTION_PROCESS_TEXT} and show them in the 1430 * action mode menu. If this flag is set via {@link 1431 * #setDisabledActionModeMenuItems}, these menu items will be disabled. 1432 */ 1433 public static final int MENU_ITEM_PROCESS_TEXT = 1 << 2; 1434} 1435