1/* 2 * extcon-max77693.c - MAX77693 extcon driver to support MAX77693 MUIC 3 * 4 * Copyright (C) 2012 Samsung Electrnoics 5 * Chanwoo Choi <cw00.choi@samsung.com> 6 * 7 * This program is free software; you can redistribute it and/or modify 8 * it under the terms of the GNU General Public License as published by 9 * the Free Software Foundation; either version 2 of the License, or 10 * (at your option) any later version. 11 * 12 * This program is distributed in the hope that it will be useful, 13 * but WITHOUT ANY WARRANTY; without even the implied warranty of 14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 15 * GNU General Public License for more details. 16 */ 17 18#include <linux/kernel.h> 19#include <linux/module.h> 20#include <linux/i2c.h> 21#include <linux/slab.h> 22#include <linux/input.h> 23#include <linux/interrupt.h> 24#include <linux/err.h> 25#include <linux/platform_device.h> 26#include <linux/mfd/max77693.h> 27#include <linux/mfd/max77693-private.h> 28#include <linux/extcon.h> 29#include <linux/regmap.h> 30#include <linux/irqdomain.h> 31 32#define DEV_NAME "max77693-muic" 33#define DELAY_MS_DEFAULT 20000 /* unit: millisecond */ 34 35/* 36 * Default value of MAX77693 register to bring up MUIC device. 37 * If user don't set some initial value for MUIC device through platform data, 38 * extcon-max77693 driver use 'default_init_data' to bring up base operation 39 * of MAX77693 MUIC device. 40 */ 41static struct max77693_reg_data default_init_data[] = { 42 { 43 /* STATUS2 - [3]ChgDetRun */ 44 .addr = MAX77693_MUIC_REG_STATUS2, 45 .data = STATUS2_CHGDETRUN_MASK, 46 }, { 47 /* INTMASK1 - Unmask [3]ADC1KM,[0]ADCM */ 48 .addr = MAX77693_MUIC_REG_INTMASK1, 49 .data = INTMASK1_ADC1K_MASK 50 | INTMASK1_ADC_MASK, 51 }, { 52 /* INTMASK2 - Unmask [0]ChgTypM */ 53 .addr = MAX77693_MUIC_REG_INTMASK2, 54 .data = INTMASK2_CHGTYP_MASK, 55 }, { 56 /* INTMASK3 - Mask all of interrupts */ 57 .addr = MAX77693_MUIC_REG_INTMASK3, 58 .data = 0x0, 59 }, { 60 /* CDETCTRL2 */ 61 .addr = MAX77693_MUIC_REG_CDETCTRL2, 62 .data = CDETCTRL2_VIDRMEN_MASK 63 | CDETCTRL2_DXOVPEN_MASK, 64 }, 65}; 66 67enum max77693_muic_adc_debounce_time { 68 ADC_DEBOUNCE_TIME_5MS = 0, 69 ADC_DEBOUNCE_TIME_10MS, 70 ADC_DEBOUNCE_TIME_25MS, 71 ADC_DEBOUNCE_TIME_38_62MS, 72}; 73 74struct max77693_muic_info { 75 struct device *dev; 76 struct max77693_dev *max77693; 77 struct extcon_dev *edev; 78 int prev_cable_type; 79 int prev_cable_type_gnd; 80 int prev_chg_type; 81 int prev_button_type; 82 u8 status[2]; 83 84 int irq; 85 struct work_struct irq_work; 86 struct mutex mutex; 87 88 /* 89 * Use delayed workqueue to detect cable state and then 90 * notify cable state to notifiee/platform through uevent. 91 * After completing the booting of platform, the extcon provider 92 * driver should notify cable state to upper layer. 93 */ 94 struct delayed_work wq_detcable; 95 96 /* Button of dock device */ 97 struct input_dev *dock; 98 99 /* 100 * Default usb/uart path whether UART/USB or AUX_UART/AUX_USB 101 * h/w path of COMP2/COMN1 on CONTROL1 register. 102 */ 103 int path_usb; 104 int path_uart; 105}; 106 107enum max77693_muic_cable_group { 108 MAX77693_CABLE_GROUP_ADC = 0, 109 MAX77693_CABLE_GROUP_ADC_GND, 110 MAX77693_CABLE_GROUP_CHG, 111 MAX77693_CABLE_GROUP_VBVOLT, 112}; 113 114enum max77693_muic_charger_type { 115 MAX77693_CHARGER_TYPE_NONE = 0, 116 MAX77693_CHARGER_TYPE_USB, 117 MAX77693_CHARGER_TYPE_DOWNSTREAM_PORT, 118 MAX77693_CHARGER_TYPE_DEDICATED_CHG, 119 MAX77693_CHARGER_TYPE_APPLE_500MA, 120 MAX77693_CHARGER_TYPE_APPLE_1A_2A, 121 MAX77693_CHARGER_TYPE_DEAD_BATTERY = 7, 122}; 123 124/** 125 * struct max77693_muic_irq 126 * @irq: the index of irq list of MUIC device. 127 * @name: the name of irq. 128 * @virq: the virtual irq to use irq domain 129 */ 130struct max77693_muic_irq { 131 unsigned int irq; 132 const char *name; 133 unsigned int virq; 134}; 135 136static struct max77693_muic_irq muic_irqs[] = { 137 { MAX77693_MUIC_IRQ_INT1_ADC, "muic-ADC" }, 138 { MAX77693_MUIC_IRQ_INT1_ADC_LOW, "muic-ADCLOW" }, 139 { MAX77693_MUIC_IRQ_INT1_ADC_ERR, "muic-ADCError" }, 140 { MAX77693_MUIC_IRQ_INT1_ADC1K, "muic-ADC1K" }, 141 { MAX77693_MUIC_IRQ_INT2_CHGTYP, "muic-CHGTYP" }, 142 { MAX77693_MUIC_IRQ_INT2_CHGDETREUN, "muic-CHGDETREUN" }, 143 { MAX77693_MUIC_IRQ_INT2_DCDTMR, "muic-DCDTMR" }, 144 { MAX77693_MUIC_IRQ_INT2_DXOVP, "muic-DXOVP" }, 145 { MAX77693_MUIC_IRQ_INT2_VBVOLT, "muic-VBVOLT" }, 146 { MAX77693_MUIC_IRQ_INT2_VIDRM, "muic-VIDRM" }, 147 { MAX77693_MUIC_IRQ_INT3_EOC, "muic-EOC" }, 148 { MAX77693_MUIC_IRQ_INT3_CGMBC, "muic-CGMBC" }, 149 { MAX77693_MUIC_IRQ_INT3_OVP, "muic-OVP" }, 150 { MAX77693_MUIC_IRQ_INT3_MBCCHG_ERR, "muic-MBCCHG_ERR" }, 151 { MAX77693_MUIC_IRQ_INT3_CHG_ENABLED, "muic-CHG_ENABLED" }, 152 { MAX77693_MUIC_IRQ_INT3_BAT_DET, "muic-BAT_DET" }, 153}; 154 155/* Define supported accessory type */ 156enum max77693_muic_acc_type { 157 MAX77693_MUIC_ADC_GROUND = 0x0, 158 MAX77693_MUIC_ADC_SEND_END_BUTTON, 159 MAX77693_MUIC_ADC_REMOTE_S1_BUTTON, 160 MAX77693_MUIC_ADC_REMOTE_S2_BUTTON, 161 MAX77693_MUIC_ADC_REMOTE_S3_BUTTON, 162 MAX77693_MUIC_ADC_REMOTE_S4_BUTTON, 163 MAX77693_MUIC_ADC_REMOTE_S5_BUTTON, 164 MAX77693_MUIC_ADC_REMOTE_S6_BUTTON, 165 MAX77693_MUIC_ADC_REMOTE_S7_BUTTON, 166 MAX77693_MUIC_ADC_REMOTE_S8_BUTTON, 167 MAX77693_MUIC_ADC_REMOTE_S9_BUTTON, 168 MAX77693_MUIC_ADC_REMOTE_S10_BUTTON, 169 MAX77693_MUIC_ADC_REMOTE_S11_BUTTON, 170 MAX77693_MUIC_ADC_REMOTE_S12_BUTTON, 171 MAX77693_MUIC_ADC_RESERVED_ACC_1, 172 MAX77693_MUIC_ADC_RESERVED_ACC_2, 173 MAX77693_MUIC_ADC_RESERVED_ACC_3, 174 MAX77693_MUIC_ADC_RESERVED_ACC_4, 175 MAX77693_MUIC_ADC_RESERVED_ACC_5, 176 MAX77693_MUIC_ADC_CEA936_AUDIO, 177 MAX77693_MUIC_ADC_PHONE_POWERED_DEV, 178 MAX77693_MUIC_ADC_TTY_CONVERTER, 179 MAX77693_MUIC_ADC_UART_CABLE, 180 MAX77693_MUIC_ADC_CEA936A_TYPE1_CHG, 181 MAX77693_MUIC_ADC_FACTORY_MODE_USB_OFF, 182 MAX77693_MUIC_ADC_FACTORY_MODE_USB_ON, 183 MAX77693_MUIC_ADC_AV_CABLE_NOLOAD, 184 MAX77693_MUIC_ADC_CEA936A_TYPE2_CHG, 185 MAX77693_MUIC_ADC_FACTORY_MODE_UART_OFF, 186 MAX77693_MUIC_ADC_FACTORY_MODE_UART_ON, 187 MAX77693_MUIC_ADC_AUDIO_MODE_REMOTE, 188 MAX77693_MUIC_ADC_OPEN, 189 190 /* The below accessories have same ADC value so ADCLow and 191 ADC1K bit is used to separate specific accessory */ 192 /* ADC|VBVolot|ADCLow|ADC1K| */ 193 MAX77693_MUIC_GND_USB_OTG = 0x100, /* 0x0| 0| 0| 0| */ 194 MAX77693_MUIC_GND_USB_OTG_VB = 0x104, /* 0x0| 1| 0| 0| */ 195 MAX77693_MUIC_GND_AV_CABLE_LOAD = 0x102,/* 0x0| 0| 1| 0| */ 196 MAX77693_MUIC_GND_MHL = 0x103, /* 0x0| 0| 1| 1| */ 197 MAX77693_MUIC_GND_MHL_VB = 0x107, /* 0x0| 1| 1| 1| */ 198}; 199 200/* 201 * MAX77693 MUIC device support below list of accessories(external connector) 202 */ 203enum { 204 EXTCON_CABLE_USB = 0, 205 EXTCON_CABLE_USB_HOST, 206 EXTCON_CABLE_TA, 207 EXTCON_CABLE_FAST_CHARGER, 208 EXTCON_CABLE_SLOW_CHARGER, 209 EXTCON_CABLE_CHARGE_DOWNSTREAM, 210 EXTCON_CABLE_MHL, 211 EXTCON_CABLE_MHL_TA, 212 EXTCON_CABLE_JIG_USB_ON, 213 EXTCON_CABLE_JIG_USB_OFF, 214 EXTCON_CABLE_JIG_UART_OFF, 215 EXTCON_CABLE_JIG_UART_ON, 216 EXTCON_CABLE_DOCK_SMART, 217 EXTCON_CABLE_DOCK_DESK, 218 EXTCON_CABLE_DOCK_AUDIO, 219 220 _EXTCON_CABLE_NUM, 221}; 222 223static const char *max77693_extcon_cable[] = { 224 [EXTCON_CABLE_USB] = "USB", 225 [EXTCON_CABLE_USB_HOST] = "USB-Host", 226 [EXTCON_CABLE_TA] = "TA", 227 [EXTCON_CABLE_FAST_CHARGER] = "Fast-charger", 228 [EXTCON_CABLE_SLOW_CHARGER] = "Slow-charger", 229 [EXTCON_CABLE_CHARGE_DOWNSTREAM] = "Charge-downstream", 230 [EXTCON_CABLE_MHL] = "MHL", 231 [EXTCON_CABLE_MHL_TA] = "MHL_TA", 232 [EXTCON_CABLE_JIG_USB_ON] = "JIG-USB-ON", 233 [EXTCON_CABLE_JIG_USB_OFF] = "JIG-USB-OFF", 234 [EXTCON_CABLE_JIG_UART_OFF] = "JIG-UART-OFF", 235 [EXTCON_CABLE_JIG_UART_ON] = "Dock-Car", 236 [EXTCON_CABLE_DOCK_SMART] = "Dock-Smart", 237 [EXTCON_CABLE_DOCK_DESK] = "Dock-Desk", 238 [EXTCON_CABLE_DOCK_AUDIO] = "Dock-Audio", 239 240 NULL, 241}; 242 243/* 244 * max77693_muic_set_debounce_time - Set the debounce time of ADC 245 * @info: the instance including private data of max77693 MUIC 246 * @time: the debounce time of ADC 247 */ 248static int max77693_muic_set_debounce_time(struct max77693_muic_info *info, 249 enum max77693_muic_adc_debounce_time time) 250{ 251 int ret; 252 253 switch (time) { 254 case ADC_DEBOUNCE_TIME_5MS: 255 case ADC_DEBOUNCE_TIME_10MS: 256 case ADC_DEBOUNCE_TIME_25MS: 257 case ADC_DEBOUNCE_TIME_38_62MS: 258 /* 259 * Don't touch BTLDset, JIGset when you want to change adc 260 * debounce time. If it writes other than 0 to BTLDset, JIGset 261 * muic device will be reset and loose current state. 262 */ 263 ret = regmap_write(info->max77693->regmap_muic, 264 MAX77693_MUIC_REG_CTRL3, 265 time << CONTROL3_ADCDBSET_SHIFT); 266 if (ret) { 267 dev_err(info->dev, "failed to set ADC debounce time\n"); 268 return ret; 269 } 270 break; 271 default: 272 dev_err(info->dev, "invalid ADC debounce time\n"); 273 return -EINVAL; 274 } 275 276 return 0; 277}; 278 279/* 280 * max77693_muic_set_path - Set hardware line according to attached cable 281 * @info: the instance including private data of max77693 MUIC 282 * @value: the path according to attached cable 283 * @attached: the state of cable (true:attached, false:detached) 284 * 285 * The max77693 MUIC device share outside H/W line among a varity of cables 286 * so, this function set internal path of H/W line according to the type of 287 * attached cable. 288 */ 289static int max77693_muic_set_path(struct max77693_muic_info *info, 290 u8 val, bool attached) 291{ 292 int ret = 0; 293 unsigned int ctrl1, ctrl2 = 0; 294 295 if (attached) 296 ctrl1 = val; 297 else 298 ctrl1 = CONTROL1_SW_OPEN; 299 300 ret = regmap_update_bits(info->max77693->regmap_muic, 301 MAX77693_MUIC_REG_CTRL1, COMP_SW_MASK, ctrl1); 302 if (ret < 0) { 303 dev_err(info->dev, "failed to update MUIC register\n"); 304 return ret; 305 } 306 307 if (attached) 308 ctrl2 |= CONTROL2_CPEN_MASK; /* LowPwr=0, CPEn=1 */ 309 else 310 ctrl2 |= CONTROL2_LOWPWR_MASK; /* LowPwr=1, CPEn=0 */ 311 312 ret = regmap_update_bits(info->max77693->regmap_muic, 313 MAX77693_MUIC_REG_CTRL2, 314 CONTROL2_LOWPWR_MASK | CONTROL2_CPEN_MASK, ctrl2); 315 if (ret < 0) { 316 dev_err(info->dev, "failed to update MUIC register\n"); 317 return ret; 318 } 319 320 dev_info(info->dev, 321 "CONTROL1 : 0x%02x, CONTROL2 : 0x%02x, state : %s\n", 322 ctrl1, ctrl2, attached ? "attached" : "detached"); 323 324 return 0; 325} 326 327/* 328 * max77693_muic_get_cable_type - Return cable type and check cable state 329 * @info: the instance including private data of max77693 MUIC 330 * @group: the path according to attached cable 331 * @attached: store cable state and return 332 * 333 * This function check the cable state either attached or detached, 334 * and then divide precise type of cable according to cable group. 335 * - MAX77693_CABLE_GROUP_ADC 336 * - MAX77693_CABLE_GROUP_ADC_GND 337 * - MAX77693_CABLE_GROUP_CHG 338 * - MAX77693_CABLE_GROUP_VBVOLT 339 */ 340static int max77693_muic_get_cable_type(struct max77693_muic_info *info, 341 enum max77693_muic_cable_group group, bool *attached) 342{ 343 int cable_type = 0; 344 int adc; 345 int adc1k; 346 int adclow; 347 int vbvolt; 348 int chg_type; 349 350 switch (group) { 351 case MAX77693_CABLE_GROUP_ADC: 352 /* 353 * Read ADC value to check cable type and decide cable state 354 * according to cable type 355 */ 356 adc = info->status[0] & STATUS1_ADC_MASK; 357 adc >>= STATUS1_ADC_SHIFT; 358 359 /* 360 * Check current cable state/cable type and store cable type 361 * (info->prev_cable_type) for handling cable when cable is 362 * detached. 363 */ 364 if (adc == MAX77693_MUIC_ADC_OPEN) { 365 *attached = false; 366 367 cable_type = info->prev_cable_type; 368 info->prev_cable_type = MAX77693_MUIC_ADC_OPEN; 369 } else { 370 *attached = true; 371 372 cable_type = info->prev_cable_type = adc; 373 } 374 break; 375 case MAX77693_CABLE_GROUP_ADC_GND: 376 /* 377 * Read ADC value to check cable type and decide cable state 378 * according to cable type 379 */ 380 adc = info->status[0] & STATUS1_ADC_MASK; 381 adc >>= STATUS1_ADC_SHIFT; 382 383 /* 384 * Check current cable state/cable type and store cable type 385 * (info->prev_cable_type/_gnd) for handling cable when cable 386 * is detached. 387 */ 388 if (adc == MAX77693_MUIC_ADC_OPEN) { 389 *attached = false; 390 391 cable_type = info->prev_cable_type_gnd; 392 info->prev_cable_type_gnd = MAX77693_MUIC_ADC_OPEN; 393 } else { 394 *attached = true; 395 396 adclow = info->status[0] & STATUS1_ADCLOW_MASK; 397 adclow >>= STATUS1_ADCLOW_SHIFT; 398 adc1k = info->status[0] & STATUS1_ADC1K_MASK; 399 adc1k >>= STATUS1_ADC1K_SHIFT; 400 401 vbvolt = info->status[1] & STATUS2_VBVOLT_MASK; 402 vbvolt >>= STATUS2_VBVOLT_SHIFT; 403 404 /** 405 * [0x1|VBVolt|ADCLow|ADC1K] 406 * [0x1| 0| 0| 0] USB_OTG 407 * [0x1| 1| 0| 0] USB_OTG_VB 408 * [0x1| 0| 1| 0] Audio Video cable with load 409 * [0x1| 0| 1| 1] MHL without charging cable 410 * [0x1| 1| 1| 1] MHL with charging cable 411 */ 412 cable_type = ((0x1 << 8) 413 | (vbvolt << 2) 414 | (adclow << 1) 415 | adc1k); 416 417 info->prev_cable_type = adc; 418 info->prev_cable_type_gnd = cable_type; 419 } 420 421 break; 422 case MAX77693_CABLE_GROUP_CHG: 423 /* 424 * Read charger type to check cable type and decide cable state 425 * according to type of charger cable. 426 */ 427 chg_type = info->status[1] & STATUS2_CHGTYP_MASK; 428 chg_type >>= STATUS2_CHGTYP_SHIFT; 429 430 if (chg_type == MAX77693_CHARGER_TYPE_NONE) { 431 *attached = false; 432 433 cable_type = info->prev_chg_type; 434 info->prev_chg_type = MAX77693_CHARGER_TYPE_NONE; 435 } else { 436 *attached = true; 437 438 /* 439 * Check current cable state/cable type and store cable 440 * type(info->prev_chg_type) for handling cable when 441 * charger cable is detached. 442 */ 443 cable_type = info->prev_chg_type = chg_type; 444 } 445 446 break; 447 case MAX77693_CABLE_GROUP_VBVOLT: 448 /* 449 * Read ADC value to check cable type and decide cable state 450 * according to cable type 451 */ 452 adc = info->status[0] & STATUS1_ADC_MASK; 453 adc >>= STATUS1_ADC_SHIFT; 454 chg_type = info->status[1] & STATUS2_CHGTYP_MASK; 455 chg_type >>= STATUS2_CHGTYP_SHIFT; 456 457 if (adc == MAX77693_MUIC_ADC_OPEN 458 && chg_type == MAX77693_CHARGER_TYPE_NONE) 459 *attached = false; 460 else 461 *attached = true; 462 463 /* 464 * Read vbvolt field, if vbvolt is 1, 465 * this cable is used for charging. 466 */ 467 vbvolt = info->status[1] & STATUS2_VBVOLT_MASK; 468 vbvolt >>= STATUS2_VBVOLT_SHIFT; 469 470 cable_type = vbvolt; 471 break; 472 default: 473 dev_err(info->dev, "Unknown cable group (%d)\n", group); 474 cable_type = -EINVAL; 475 break; 476 } 477 478 return cable_type; 479} 480 481static int max77693_muic_dock_handler(struct max77693_muic_info *info, 482 int cable_type, bool attached) 483{ 484 int ret = 0; 485 int vbvolt; 486 bool cable_attached; 487 char dock_name[CABLE_NAME_MAX]; 488 489 dev_info(info->dev, 490 "external connector is %s (adc:0x%02x)\n", 491 attached ? "attached" : "detached", cable_type); 492 493 switch (cable_type) { 494 case MAX77693_MUIC_ADC_RESERVED_ACC_3: /* Dock-Smart */ 495 /* 496 * Check power cable whether attached or detached state. 497 * The Dock-Smart device need surely external power supply. 498 * If power cable(USB/TA) isn't connected to Dock device, 499 * user can't use Dock-Smart for desktop mode. 500 */ 501 vbvolt = max77693_muic_get_cable_type(info, 502 MAX77693_CABLE_GROUP_VBVOLT, &cable_attached); 503 if (attached && !vbvolt) { 504 dev_warn(info->dev, 505 "Cannot detect external power supply\n"); 506 return 0; 507 } 508 509 /* 510 * Notify Dock-Smart/MHL state. 511 * - Dock-Smart device include three type of cable which 512 * are HDMI, USB for mouse/keyboard and micro-usb port 513 * for USB/TA cable. Dock-Smart device need always exteranl 514 * power supply(USB/TA cable through micro-usb cable). Dock- 515 * Smart device support screen output of target to separate 516 * monitor and mouse/keyboard for desktop mode. 517 * 518 * Features of 'USB/TA cable with Dock-Smart device' 519 * - Support MHL 520 * - Support external output feature of audio 521 * - Support charging through micro-usb port without data 522 * connection if TA cable is connected to target. 523 * - Support charging and data connection through micro-usb port 524 * if USB cable is connected between target and host 525 * device. 526 * - Support OTG device (Mouse/Keyboard) 527 */ 528 ret = max77693_muic_set_path(info, info->path_usb, attached); 529 if (ret < 0) 530 return ret; 531 532 extcon_set_cable_state(info->edev, "Dock-Smart", attached); 533 extcon_set_cable_state(info->edev, "MHL", attached); 534 goto out; 535 case MAX77693_MUIC_ADC_FACTORY_MODE_UART_ON: /* Dock-Car */ 536 strcpy(dock_name, "Dock-Car"); 537 break; 538 case MAX77693_MUIC_ADC_AUDIO_MODE_REMOTE: /* Dock-Desk */ 539 strcpy(dock_name, "Dock-Desk"); 540 break; 541 case MAX77693_MUIC_ADC_AV_CABLE_NOLOAD: /* Dock-Audio */ 542 strcpy(dock_name, "Dock-Audio"); 543 if (!attached) 544 extcon_set_cable_state(info->edev, "USB", false); 545 break; 546 default: 547 dev_err(info->dev, "failed to detect %s dock device\n", 548 attached ? "attached" : "detached"); 549 return -EINVAL; 550 } 551 552 /* Dock-Car/Desk/Audio, PATH:AUDIO */ 553 ret = max77693_muic_set_path(info, CONTROL1_SW_AUDIO, attached); 554 if (ret < 0) 555 return ret; 556 extcon_set_cable_state(info->edev, dock_name, attached); 557 558out: 559 return 0; 560} 561 562static int max77693_muic_dock_button_handler(struct max77693_muic_info *info, 563 int button_type, bool attached) 564{ 565 struct input_dev *dock = info->dock; 566 unsigned int code; 567 568 switch (button_type) { 569 case MAX77693_MUIC_ADC_REMOTE_S3_BUTTON-1 570 ... MAX77693_MUIC_ADC_REMOTE_S3_BUTTON+1: 571 /* DOCK_KEY_PREV */ 572 code = KEY_PREVIOUSSONG; 573 break; 574 case MAX77693_MUIC_ADC_REMOTE_S7_BUTTON-1 575 ... MAX77693_MUIC_ADC_REMOTE_S7_BUTTON+1: 576 /* DOCK_KEY_NEXT */ 577 code = KEY_NEXTSONG; 578 break; 579 case MAX77693_MUIC_ADC_REMOTE_S9_BUTTON: 580 /* DOCK_VOL_DOWN */ 581 code = KEY_VOLUMEDOWN; 582 break; 583 case MAX77693_MUIC_ADC_REMOTE_S10_BUTTON: 584 /* DOCK_VOL_UP */ 585 code = KEY_VOLUMEUP; 586 break; 587 case MAX77693_MUIC_ADC_REMOTE_S12_BUTTON-1 588 ... MAX77693_MUIC_ADC_REMOTE_S12_BUTTON+1: 589 /* DOCK_KEY_PLAY_PAUSE */ 590 code = KEY_PLAYPAUSE; 591 break; 592 default: 593 dev_err(info->dev, 594 "failed to detect %s key (adc:0x%x)\n", 595 attached ? "pressed" : "released", button_type); 596 return -EINVAL; 597 } 598 599 input_event(dock, EV_KEY, code, attached); 600 input_sync(dock); 601 602 return 0; 603} 604 605static int max77693_muic_adc_ground_handler(struct max77693_muic_info *info) 606{ 607 int cable_type_gnd; 608 int ret = 0; 609 bool attached; 610 611 cable_type_gnd = max77693_muic_get_cable_type(info, 612 MAX77693_CABLE_GROUP_ADC_GND, &attached); 613 614 switch (cable_type_gnd) { 615 case MAX77693_MUIC_GND_USB_OTG: 616 case MAX77693_MUIC_GND_USB_OTG_VB: 617 /* USB_OTG, PATH: AP_USB */ 618 ret = max77693_muic_set_path(info, CONTROL1_SW_USB, attached); 619 if (ret < 0) 620 return ret; 621 extcon_set_cable_state(info->edev, "USB-Host", attached); 622 break; 623 case MAX77693_MUIC_GND_AV_CABLE_LOAD: 624 /* Audio Video Cable with load, PATH:AUDIO */ 625 ret = max77693_muic_set_path(info, CONTROL1_SW_AUDIO, attached); 626 if (ret < 0) 627 return ret; 628 extcon_set_cable_state(info->edev, 629 "Audio-video-load", attached); 630 break; 631 case MAX77693_MUIC_GND_MHL: 632 case MAX77693_MUIC_GND_MHL_VB: 633 /* MHL or MHL with USB/TA cable */ 634 extcon_set_cable_state(info->edev, "MHL", attached); 635 break; 636 default: 637 dev_err(info->dev, "failed to detect %s cable of gnd type\n", 638 attached ? "attached" : "detached"); 639 return -EINVAL; 640 } 641 642 return 0; 643} 644 645static int max77693_muic_jig_handler(struct max77693_muic_info *info, 646 int cable_type, bool attached) 647{ 648 char cable_name[32]; 649 int ret = 0; 650 u8 path = CONTROL1_SW_OPEN; 651 652 dev_info(info->dev, 653 "external connector is %s (adc:0x%02x)\n", 654 attached ? "attached" : "detached", cable_type); 655 656 switch (cable_type) { 657 case MAX77693_MUIC_ADC_FACTORY_MODE_USB_OFF: /* ADC_JIG_USB_OFF */ 658 /* PATH:AP_USB */ 659 strcpy(cable_name, "JIG-USB-OFF"); 660 path = CONTROL1_SW_USB; 661 break; 662 case MAX77693_MUIC_ADC_FACTORY_MODE_USB_ON: /* ADC_JIG_USB_ON */ 663 /* PATH:AP_USB */ 664 strcpy(cable_name, "JIG-USB-ON"); 665 path = CONTROL1_SW_USB; 666 break; 667 case MAX77693_MUIC_ADC_FACTORY_MODE_UART_OFF: /* ADC_JIG_UART_OFF */ 668 /* PATH:AP_UART */ 669 strcpy(cable_name, "JIG-UART-OFF"); 670 path = CONTROL1_SW_UART; 671 break; 672 default: 673 dev_err(info->dev, "failed to detect %s jig cable\n", 674 attached ? "attached" : "detached"); 675 return -EINVAL; 676 } 677 678 ret = max77693_muic_set_path(info, path, attached); 679 if (ret < 0) 680 return ret; 681 682 extcon_set_cable_state(info->edev, cable_name, attached); 683 684 return 0; 685} 686 687static int max77693_muic_adc_handler(struct max77693_muic_info *info) 688{ 689 int cable_type; 690 int button_type; 691 bool attached; 692 int ret = 0; 693 694 /* Check accessory state which is either detached or attached */ 695 cable_type = max77693_muic_get_cable_type(info, 696 MAX77693_CABLE_GROUP_ADC, &attached); 697 698 dev_info(info->dev, 699 "external connector is %s (adc:0x%02x, prev_adc:0x%x)\n", 700 attached ? "attached" : "detached", cable_type, 701 info->prev_cable_type); 702 703 switch (cable_type) { 704 case MAX77693_MUIC_ADC_GROUND: 705 /* USB_OTG/MHL/Audio */ 706 max77693_muic_adc_ground_handler(info); 707 break; 708 case MAX77693_MUIC_ADC_FACTORY_MODE_USB_OFF: 709 case MAX77693_MUIC_ADC_FACTORY_MODE_USB_ON: 710 case MAX77693_MUIC_ADC_FACTORY_MODE_UART_OFF: 711 /* JIG */ 712 ret = max77693_muic_jig_handler(info, cable_type, attached); 713 if (ret < 0) 714 return ret; 715 break; 716 case MAX77693_MUIC_ADC_RESERVED_ACC_3: /* Dock-Smart */ 717 case MAX77693_MUIC_ADC_FACTORY_MODE_UART_ON: /* Dock-Car */ 718 case MAX77693_MUIC_ADC_AUDIO_MODE_REMOTE: /* Dock-Desk */ 719 case MAX77693_MUIC_ADC_AV_CABLE_NOLOAD: /* Dock-Audio */ 720 /* 721 * DOCK device 722 * 723 * The MAX77693 MUIC device can detect total 34 cable type 724 * except of charger cable and MUIC device didn't define 725 * specfic role of cable in the range of from 0x01 to 0x12 726 * of ADC value. So, can use/define cable with no role according 727 * to schema of hardware board. 728 */ 729 ret = max77693_muic_dock_handler(info, cable_type, attached); 730 if (ret < 0) 731 return ret; 732 break; 733 case MAX77693_MUIC_ADC_REMOTE_S3_BUTTON: /* DOCK_KEY_PREV */ 734 case MAX77693_MUIC_ADC_REMOTE_S7_BUTTON: /* DOCK_KEY_NEXT */ 735 case MAX77693_MUIC_ADC_REMOTE_S9_BUTTON: /* DOCK_VOL_DOWN */ 736 case MAX77693_MUIC_ADC_REMOTE_S10_BUTTON: /* DOCK_VOL_UP */ 737 case MAX77693_MUIC_ADC_REMOTE_S12_BUTTON: /* DOCK_KEY_PLAY_PAUSE */ 738 /* 739 * Button of DOCK device 740 * - the Prev/Next/Volume Up/Volume Down/Play-Pause button 741 * 742 * The MAX77693 MUIC device can detect total 34 cable type 743 * except of charger cable and MUIC device didn't define 744 * specfic role of cable in the range of from 0x01 to 0x12 745 * of ADC value. So, can use/define cable with no role according 746 * to schema of hardware board. 747 */ 748 if (attached) 749 button_type = info->prev_button_type = cable_type; 750 else 751 button_type = info->prev_button_type; 752 753 ret = max77693_muic_dock_button_handler(info, button_type, 754 attached); 755 if (ret < 0) 756 return ret; 757 break; 758 case MAX77693_MUIC_ADC_SEND_END_BUTTON: 759 case MAX77693_MUIC_ADC_REMOTE_S1_BUTTON: 760 case MAX77693_MUIC_ADC_REMOTE_S2_BUTTON: 761 case MAX77693_MUIC_ADC_REMOTE_S4_BUTTON: 762 case MAX77693_MUIC_ADC_REMOTE_S5_BUTTON: 763 case MAX77693_MUIC_ADC_REMOTE_S6_BUTTON: 764 case MAX77693_MUIC_ADC_REMOTE_S8_BUTTON: 765 case MAX77693_MUIC_ADC_REMOTE_S11_BUTTON: 766 case MAX77693_MUIC_ADC_RESERVED_ACC_1: 767 case MAX77693_MUIC_ADC_RESERVED_ACC_2: 768 case MAX77693_MUIC_ADC_RESERVED_ACC_4: 769 case MAX77693_MUIC_ADC_RESERVED_ACC_5: 770 case MAX77693_MUIC_ADC_CEA936_AUDIO: 771 case MAX77693_MUIC_ADC_PHONE_POWERED_DEV: 772 case MAX77693_MUIC_ADC_TTY_CONVERTER: 773 case MAX77693_MUIC_ADC_UART_CABLE: 774 case MAX77693_MUIC_ADC_CEA936A_TYPE1_CHG: 775 case MAX77693_MUIC_ADC_CEA936A_TYPE2_CHG: 776 /* 777 * This accessory isn't used in general case if it is specially 778 * needed to detect additional accessory, should implement 779 * proper operation when this accessory is attached/detached. 780 */ 781 dev_info(info->dev, 782 "accessory is %s but it isn't used (adc:0x%x)\n", 783 attached ? "attached" : "detached", cable_type); 784 return -EAGAIN; 785 default: 786 dev_err(info->dev, 787 "failed to detect %s accessory (adc:0x%x)\n", 788 attached ? "attached" : "detached", cable_type); 789 return -EINVAL; 790 } 791 792 return 0; 793} 794 795static int max77693_muic_chg_handler(struct max77693_muic_info *info) 796{ 797 int chg_type; 798 int cable_type_gnd; 799 int cable_type; 800 bool attached; 801 bool cable_attached; 802 int ret = 0; 803 804 chg_type = max77693_muic_get_cable_type(info, 805 MAX77693_CABLE_GROUP_CHG, &attached); 806 807 dev_info(info->dev, 808 "external connector is %s(chg_type:0x%x, prev_chg_type:0x%x)\n", 809 attached ? "attached" : "detached", 810 chg_type, info->prev_chg_type); 811 812 switch (chg_type) { 813 case MAX77693_CHARGER_TYPE_USB: 814 case MAX77693_CHARGER_TYPE_DEDICATED_CHG: 815 case MAX77693_CHARGER_TYPE_NONE: 816 /* Check MAX77693_CABLE_GROUP_ADC_GND type */ 817 cable_type_gnd = max77693_muic_get_cable_type(info, 818 MAX77693_CABLE_GROUP_ADC_GND, 819 &cable_attached); 820 switch (cable_type_gnd) { 821 case MAX77693_MUIC_GND_MHL: 822 case MAX77693_MUIC_GND_MHL_VB: 823 /* 824 * MHL cable with MHL_TA(USB/TA) cable 825 * - MHL cable include two port(HDMI line and separate 826 * micro-usb port. When the target connect MHL cable, 827 * extcon driver check whether MHL_TA(USB/TA) cable is 828 * connected. If MHL_TA cable is connected, extcon 829 * driver notify state to notifiee for charging battery. 830 * 831 * Features of 'MHL_TA(USB/TA) with MHL cable' 832 * - Support MHL 833 * - Support charging through micro-usb port without 834 * data connection 835 */ 836 extcon_set_cable_state(info->edev, "MHL_TA", attached); 837 if (!cable_attached) 838 extcon_set_cable_state(info->edev, 839 "MHL", cable_attached); 840 break; 841 } 842 843 /* Check MAX77693_CABLE_GROUP_ADC type */ 844 cable_type = max77693_muic_get_cable_type(info, 845 MAX77693_CABLE_GROUP_ADC, 846 &cable_attached); 847 switch (cable_type) { 848 case MAX77693_MUIC_ADC_AV_CABLE_NOLOAD: /* Dock-Audio */ 849 /* 850 * Dock-Audio device with USB/TA cable 851 * - Dock device include two port(Dock-Audio and micro- 852 * usb port). When the target connect Dock-Audio device, 853 * extcon driver check whether USB/TA cable is connected 854 * or not. If USB/TA cable is connected, extcon driver 855 * notify state to notifiee for charging battery. 856 * 857 * Features of 'USB/TA cable with Dock-Audio device' 858 * - Support external output feature of audio. 859 * - Support charging through micro-usb port without 860 * data connection. 861 */ 862 extcon_set_cable_state(info->edev, "USB", attached); 863 864 if (!cable_attached) 865 extcon_set_cable_state(info->edev, "Dock-Audio", 866 cable_attached); 867 break; 868 case MAX77693_MUIC_ADC_RESERVED_ACC_3: /* Dock-Smart */ 869 /* 870 * Dock-Smart device with USB/TA cable 871 * - Dock-Desk device include three type of cable which 872 * are HDMI, USB for mouse/keyboard and micro-usb port 873 * for USB/TA cable. Dock-Smart device need always 874 * exteranl power supply(USB/TA cable through micro-usb 875 * cable). Dock-Smart device support screen output of 876 * target to separate monitor and mouse/keyboard for 877 * desktop mode. 878 * 879 * Features of 'USB/TA cable with Dock-Smart device' 880 * - Support MHL 881 * - Support external output feature of audio 882 * - Support charging through micro-usb port without 883 * data connection if TA cable is connected to target. 884 * - Support charging and data connection through micro- 885 * usb port if USB cable is connected between target 886 * and host device 887 * - Support OTG device (Mouse/Keyboard) 888 */ 889 ret = max77693_muic_set_path(info, info->path_usb, 890 attached); 891 if (ret < 0) 892 return ret; 893 894 extcon_set_cable_state(info->edev, "Dock-Smart", 895 attached); 896 extcon_set_cable_state(info->edev, "MHL", attached); 897 898 break; 899 } 900 901 /* Check MAX77693_CABLE_GROUP_CHG type */ 902 switch (chg_type) { 903 case MAX77693_CHARGER_TYPE_NONE: 904 /* 905 * When MHL(with USB/TA cable) or Dock-Audio with USB/TA 906 * cable is attached, muic device happen below two irq. 907 * - 'MAX77693_MUIC_IRQ_INT1_ADC' for detecting 908 * MHL/Dock-Audio. 909 * - 'MAX77693_MUIC_IRQ_INT2_CHGTYP' for detecting 910 * USB/TA cable connected to MHL or Dock-Audio. 911 * Always, happen eariler MAX77693_MUIC_IRQ_INT1_ADC 912 * irq than MAX77693_MUIC_IRQ_INT2_CHGTYP irq. 913 * 914 * If user attach MHL (with USB/TA cable and immediately 915 * detach MHL with USB/TA cable before MAX77693_MUIC_IRQ 916 * _INT2_CHGTYP irq is happened, USB/TA cable remain 917 * connected state to target. But USB/TA cable isn't 918 * connected to target. The user be face with unusual 919 * action. So, driver should check this situation in 920 * spite of, that previous charger type is N/A. 921 */ 922 break; 923 case MAX77693_CHARGER_TYPE_USB: 924 /* Only USB cable, PATH:AP_USB */ 925 ret = max77693_muic_set_path(info, info->path_usb, 926 attached); 927 if (ret < 0) 928 return ret; 929 930 extcon_set_cable_state(info->edev, "USB", attached); 931 break; 932 case MAX77693_CHARGER_TYPE_DEDICATED_CHG: 933 /* Only TA cable */ 934 extcon_set_cable_state(info->edev, "TA", attached); 935 break; 936 } 937 break; 938 case MAX77693_CHARGER_TYPE_DOWNSTREAM_PORT: 939 extcon_set_cable_state(info->edev, 940 "Charge-downstream", attached); 941 break; 942 case MAX77693_CHARGER_TYPE_APPLE_500MA: 943 extcon_set_cable_state(info->edev, "Slow-charger", attached); 944 break; 945 case MAX77693_CHARGER_TYPE_APPLE_1A_2A: 946 extcon_set_cable_state(info->edev, "Fast-charger", attached); 947 break; 948 case MAX77693_CHARGER_TYPE_DEAD_BATTERY: 949 break; 950 default: 951 dev_err(info->dev, 952 "failed to detect %s accessory (chg_type:0x%x)\n", 953 attached ? "attached" : "detached", chg_type); 954 return -EINVAL; 955 } 956 957 return 0; 958} 959 960static void max77693_muic_irq_work(struct work_struct *work) 961{ 962 struct max77693_muic_info *info = container_of(work, 963 struct max77693_muic_info, irq_work); 964 int irq_type = -1; 965 int i, ret = 0; 966 967 if (!info->edev) 968 return; 969 970 mutex_lock(&info->mutex); 971 972 for (i = 0; i < ARRAY_SIZE(muic_irqs); i++) 973 if (info->irq == muic_irqs[i].virq) 974 irq_type = muic_irqs[i].irq; 975 976 ret = regmap_bulk_read(info->max77693->regmap_muic, 977 MAX77693_MUIC_REG_STATUS1, info->status, 2); 978 if (ret) { 979 dev_err(info->dev, "failed to read MUIC register\n"); 980 mutex_unlock(&info->mutex); 981 return; 982 } 983 984 switch (irq_type) { 985 case MAX77693_MUIC_IRQ_INT1_ADC: 986 case MAX77693_MUIC_IRQ_INT1_ADC_LOW: 987 case MAX77693_MUIC_IRQ_INT1_ADC_ERR: 988 case MAX77693_MUIC_IRQ_INT1_ADC1K: 989 /* Handle all of accessory except for 990 type of charger accessory */ 991 ret = max77693_muic_adc_handler(info); 992 break; 993 case MAX77693_MUIC_IRQ_INT2_CHGTYP: 994 case MAX77693_MUIC_IRQ_INT2_CHGDETREUN: 995 case MAX77693_MUIC_IRQ_INT2_DCDTMR: 996 case MAX77693_MUIC_IRQ_INT2_DXOVP: 997 case MAX77693_MUIC_IRQ_INT2_VBVOLT: 998 case MAX77693_MUIC_IRQ_INT2_VIDRM: 999 /* Handle charger accessory */ 1000 ret = max77693_muic_chg_handler(info); 1001 break; 1002 case MAX77693_MUIC_IRQ_INT3_EOC: 1003 case MAX77693_MUIC_IRQ_INT3_CGMBC: 1004 case MAX77693_MUIC_IRQ_INT3_OVP: 1005 case MAX77693_MUIC_IRQ_INT3_MBCCHG_ERR: 1006 case MAX77693_MUIC_IRQ_INT3_CHG_ENABLED: 1007 case MAX77693_MUIC_IRQ_INT3_BAT_DET: 1008 break; 1009 default: 1010 dev_err(info->dev, "muic interrupt: irq %d occurred\n", 1011 irq_type); 1012 mutex_unlock(&info->mutex); 1013 return; 1014 } 1015 1016 if (ret < 0) 1017 dev_err(info->dev, "failed to handle MUIC interrupt\n"); 1018 1019 mutex_unlock(&info->mutex); 1020 1021 return; 1022} 1023 1024static irqreturn_t max77693_muic_irq_handler(int irq, void *data) 1025{ 1026 struct max77693_muic_info *info = data; 1027 1028 info->irq = irq; 1029 schedule_work(&info->irq_work); 1030 1031 return IRQ_HANDLED; 1032} 1033 1034static struct regmap_config max77693_muic_regmap_config = { 1035 .reg_bits = 8, 1036 .val_bits = 8, 1037}; 1038 1039static int max77693_muic_detect_accessory(struct max77693_muic_info *info) 1040{ 1041 int ret = 0; 1042 int adc; 1043 int chg_type; 1044 bool attached; 1045 1046 mutex_lock(&info->mutex); 1047 1048 /* Read STATUSx register to detect accessory */ 1049 ret = regmap_bulk_read(info->max77693->regmap_muic, 1050 MAX77693_MUIC_REG_STATUS1, info->status, 2); 1051 if (ret) { 1052 dev_err(info->dev, "failed to read MUIC register\n"); 1053 mutex_unlock(&info->mutex); 1054 return ret; 1055 } 1056 1057 adc = max77693_muic_get_cable_type(info, MAX77693_CABLE_GROUP_ADC, 1058 &attached); 1059 if (attached && adc != MAX77693_MUIC_ADC_OPEN) { 1060 ret = max77693_muic_adc_handler(info); 1061 if (ret < 0) { 1062 dev_err(info->dev, "Cannot detect accessory\n"); 1063 mutex_unlock(&info->mutex); 1064 return ret; 1065 } 1066 } 1067 1068 chg_type = max77693_muic_get_cable_type(info, MAX77693_CABLE_GROUP_CHG, 1069 &attached); 1070 if (attached && chg_type != MAX77693_CHARGER_TYPE_NONE) { 1071 ret = max77693_muic_chg_handler(info); 1072 if (ret < 0) { 1073 dev_err(info->dev, "Cannot detect charger accessory\n"); 1074 mutex_unlock(&info->mutex); 1075 return ret; 1076 } 1077 } 1078 1079 mutex_unlock(&info->mutex); 1080 1081 return 0; 1082} 1083 1084static void max77693_muic_detect_cable_wq(struct work_struct *work) 1085{ 1086 struct max77693_muic_info *info = container_of(to_delayed_work(work), 1087 struct max77693_muic_info, wq_detcable); 1088 1089 max77693_muic_detect_accessory(info); 1090} 1091 1092static int max77693_muic_probe(struct platform_device *pdev) 1093{ 1094 struct max77693_dev *max77693 = dev_get_drvdata(pdev->dev.parent); 1095 struct max77693_platform_data *pdata = dev_get_platdata(max77693->dev); 1096 struct max77693_muic_info *info; 1097 struct max77693_reg_data *init_data; 1098 int num_init_data; 1099 int delay_jiffies; 1100 int ret; 1101 int i; 1102 unsigned int id; 1103 1104 info = devm_kzalloc(&pdev->dev, sizeof(struct max77693_muic_info), 1105 GFP_KERNEL); 1106 if (!info) 1107 return -ENOMEM; 1108 1109 info->dev = &pdev->dev; 1110 info->max77693 = max77693; 1111 if (info->max77693->regmap_muic) { 1112 dev_dbg(&pdev->dev, "allocate register map\n"); 1113 } else { 1114 info->max77693->regmap_muic = devm_regmap_init_i2c( 1115 info->max77693->muic, 1116 &max77693_muic_regmap_config); 1117 if (IS_ERR(info->max77693->regmap_muic)) { 1118 ret = PTR_ERR(info->max77693->regmap_muic); 1119 dev_err(max77693->dev, 1120 "failed to allocate register map: %d\n", ret); 1121 return ret; 1122 } 1123 } 1124 1125 /* Register input device for button of dock device */ 1126 info->dock = devm_input_allocate_device(&pdev->dev); 1127 if (!info->dock) { 1128 dev_err(&pdev->dev, "%s: failed to allocate input\n", __func__); 1129 return -ENOMEM; 1130 } 1131 info->dock->name = "max77693-muic/dock"; 1132 info->dock->phys = "max77693-muic/extcon"; 1133 info->dock->dev.parent = &pdev->dev; 1134 1135 __set_bit(EV_REP, info->dock->evbit); 1136 1137 input_set_capability(info->dock, EV_KEY, KEY_VOLUMEUP); 1138 input_set_capability(info->dock, EV_KEY, KEY_VOLUMEDOWN); 1139 input_set_capability(info->dock, EV_KEY, KEY_PLAYPAUSE); 1140 input_set_capability(info->dock, EV_KEY, KEY_PREVIOUSSONG); 1141 input_set_capability(info->dock, EV_KEY, KEY_NEXTSONG); 1142 1143 ret = input_register_device(info->dock); 1144 if (ret < 0) { 1145 dev_err(&pdev->dev, "Cannot register input device error(%d)\n", 1146 ret); 1147 return ret; 1148 } 1149 1150 platform_set_drvdata(pdev, info); 1151 mutex_init(&info->mutex); 1152 1153 INIT_WORK(&info->irq_work, max77693_muic_irq_work); 1154 1155 /* Support irq domain for MAX77693 MUIC device */ 1156 for (i = 0; i < ARRAY_SIZE(muic_irqs); i++) { 1157 struct max77693_muic_irq *muic_irq = &muic_irqs[i]; 1158 unsigned int virq = 0; 1159 1160 virq = regmap_irq_get_virq(max77693->irq_data_muic, 1161 muic_irq->irq); 1162 if (!virq) 1163 return -EINVAL; 1164 muic_irq->virq = virq; 1165 1166 ret = devm_request_threaded_irq(&pdev->dev, virq, NULL, 1167 max77693_muic_irq_handler, 1168 IRQF_NO_SUSPEND, 1169 muic_irq->name, info); 1170 if (ret) { 1171 dev_err(&pdev->dev, 1172 "failed: irq request (IRQ: %d," 1173 " error :%d)\n", 1174 muic_irq->irq, ret); 1175 return ret; 1176 } 1177 } 1178 1179 /* Initialize extcon device */ 1180 info->edev = devm_extcon_dev_allocate(&pdev->dev, 1181 max77693_extcon_cable); 1182 if (IS_ERR(info->edev)) { 1183 dev_err(&pdev->dev, "failed to allocate memory for extcon\n"); 1184 return -ENOMEM; 1185 } 1186 info->edev->name = DEV_NAME; 1187 1188 ret = devm_extcon_dev_register(&pdev->dev, info->edev); 1189 if (ret) { 1190 dev_err(&pdev->dev, "failed to register extcon device\n"); 1191 return ret; 1192 } 1193 1194 /* Initialize MUIC register by using platform data or default data */ 1195 if (pdata && pdata->muic_data) { 1196 init_data = pdata->muic_data->init_data; 1197 num_init_data = pdata->muic_data->num_init_data; 1198 } else { 1199 init_data = default_init_data; 1200 num_init_data = ARRAY_SIZE(default_init_data); 1201 } 1202 1203 for (i = 0; i < num_init_data; i++) { 1204 enum max77693_irq_source irq_src 1205 = MAX77693_IRQ_GROUP_NR; 1206 1207 regmap_write(info->max77693->regmap_muic, 1208 init_data[i].addr, 1209 init_data[i].data); 1210 1211 switch (init_data[i].addr) { 1212 case MAX77693_MUIC_REG_INTMASK1: 1213 irq_src = MUIC_INT1; 1214 break; 1215 case MAX77693_MUIC_REG_INTMASK2: 1216 irq_src = MUIC_INT2; 1217 break; 1218 case MAX77693_MUIC_REG_INTMASK3: 1219 irq_src = MUIC_INT3; 1220 break; 1221 } 1222 1223 if (irq_src < MAX77693_IRQ_GROUP_NR) 1224 info->max77693->irq_masks_cur[irq_src] 1225 = init_data[i].data; 1226 } 1227 1228 if (pdata && pdata->muic_data) { 1229 struct max77693_muic_platform_data *muic_pdata 1230 = pdata->muic_data; 1231 1232 /* 1233 * Default usb/uart path whether UART/USB or AUX_UART/AUX_USB 1234 * h/w path of COMP2/COMN1 on CONTROL1 register. 1235 */ 1236 if (muic_pdata->path_uart) 1237 info->path_uart = muic_pdata->path_uart; 1238 else 1239 info->path_uart = CONTROL1_SW_UART; 1240 1241 if (muic_pdata->path_usb) 1242 info->path_usb = muic_pdata->path_usb; 1243 else 1244 info->path_usb = CONTROL1_SW_USB; 1245 1246 /* 1247 * Default delay time for detecting cable state 1248 * after certain time. 1249 */ 1250 if (muic_pdata->detcable_delay_ms) 1251 delay_jiffies = 1252 msecs_to_jiffies(muic_pdata->detcable_delay_ms); 1253 else 1254 delay_jiffies = msecs_to_jiffies(DELAY_MS_DEFAULT); 1255 } else { 1256 info->path_usb = CONTROL1_SW_USB; 1257 info->path_uart = CONTROL1_SW_UART; 1258 delay_jiffies = msecs_to_jiffies(DELAY_MS_DEFAULT); 1259 } 1260 1261 /* Set initial path for UART */ 1262 max77693_muic_set_path(info, info->path_uart, true); 1263 1264 /* Check revision number of MUIC device*/ 1265 ret = regmap_read(info->max77693->regmap_muic, 1266 MAX77693_MUIC_REG_ID, &id); 1267 if (ret < 0) { 1268 dev_err(&pdev->dev, "failed to read revision number\n"); 1269 return ret; 1270 } 1271 dev_info(info->dev, "device ID : 0x%x\n", id); 1272 1273 /* Set ADC debounce time */ 1274 max77693_muic_set_debounce_time(info, ADC_DEBOUNCE_TIME_25MS); 1275 1276 /* 1277 * Detect accessory after completing the initialization of platform 1278 * 1279 * - Use delayed workqueue to detect cable state and then 1280 * notify cable state to notifiee/platform through uevent. 1281 * After completing the booting of platform, the extcon provider 1282 * driver should notify cable state to upper layer. 1283 */ 1284 INIT_DELAYED_WORK(&info->wq_detcable, max77693_muic_detect_cable_wq); 1285 queue_delayed_work(system_power_efficient_wq, &info->wq_detcable, 1286 delay_jiffies); 1287 1288 return ret; 1289} 1290 1291static int max77693_muic_remove(struct platform_device *pdev) 1292{ 1293 struct max77693_muic_info *info = platform_get_drvdata(pdev); 1294 1295 cancel_work_sync(&info->irq_work); 1296 input_unregister_device(info->dock); 1297 1298 return 0; 1299} 1300 1301static struct platform_driver max77693_muic_driver = { 1302 .driver = { 1303 .name = DEV_NAME, 1304 .owner = THIS_MODULE, 1305 }, 1306 .probe = max77693_muic_probe, 1307 .remove = max77693_muic_remove, 1308}; 1309 1310module_platform_driver(max77693_muic_driver); 1311 1312MODULE_DESCRIPTION("Maxim MAX77693 Extcon driver"); 1313MODULE_AUTHOR("Chanwoo Choi <cw00.choi@samsung.com>"); 1314MODULE_LICENSE("GPL"); 1315MODULE_ALIAS("platform:extcon-max77693"); 1316