| /drivers/media/platform/vsp1/ |
| H A D | vsp1_sru.c | 47 u32 ctrl2; member in struct:vsp1_sru_param
62 .ctrl2 = VI6_SRU_CTRL2_PARAMS(24, 40, 255),
65 .ctrl2 = VI6_SRU_CTRL2_PARAMS(8, 16, 255),
68 .ctrl2 = VI6_SRU_CTRL2_PARAMS(36, 60, 255),
71 .ctrl2 = VI6_SRU_CTRL2_PARAMS(12, 27, 255),
74 .ctrl2 = VI6_SRU_CTRL2_PARAMS(48, 80, 255),
77 .ctrl2 = VI6_SRU_CTRL2_PARAMS(16, 36, 255),
98 vsp1_sru_write(sru, VI6_SRU_CTRL2, param->ctrl2);
|
| /drivers/pci/ |
| H A D | vc.c | 107 u32 ctrl, header, cap1, ctrl2; local
141 pci_read_config_dword(dev->bus->self, ctrl_pos2, &ctrl2);
142 if ((ctrl2 & PCI_VC_RES_CTRL_ID) == id) {
152 if (ctrl2 & PCI_VC_RES_CTRL_ENABLE) {
153 ctrl2 &= ~PCI_VC_RES_CTRL_ENABLE;
154 pci_write_config_dword(link, ctrl_pos2, ctrl2);
158 ctrl2 |= PCI_VC_RES_CTRL_ENABLE;
159 pci_write_config_dword(link, ctrl_pos2, ctrl2);
|
| /drivers/rtc/ |
| H A D | rtc-rx8025.c | 267 u8 ctrl[2], ctrl2; local
305 ctrl2 = ctrl[0];
306 ctrl2 &= ~(RX8025_BIT_CTRL2_PON | RX8025_BIT_CTRL2_VDET |
309 ctrl2 |= RX8025_BIT_CTRL2_XST;
311 err = rx8025_write_reg(client, RX8025_REG_CTRL2, ctrl2);
322 u8 ctrl2, ald[2]; local
332 err = rx8025_read_reg(client, RX8025_REG_CTRL2, &ctrl2);
336 dev_dbg(dev, "%s: read alarm 0x%02x 0x%02x ctrl2 %02x\n",
337 __func__, ald[0], ald[1], ctrl2);
358 t->pending = (ctrl2
[all...] |
| /drivers/extcon/ |
| H A D | extcon-max14577.c | 226 u8 ctrl1, ctrl2 = 0; local
251 ctrl2 |= CTRL2_CPEN_MASK; /* LowPwr=0, CPEn=1 */
253 ctrl2 |= CTRL2_LOWPWR_MASK; /* LowPwr=1, CPEn=0 */
257 CTRL2_LOWPWR_MASK | CTRL2_CPEN_MASK, ctrl2);
265 ctrl1, ctrl2, attached ? "attached" : "detached");
|
| H A D | extcon-max8997.c | 224 u8 ctrl1, ctrl2 = 0; local
239 ctrl2 |= CONTROL2_CPEN_MASK; /* LowPwr=0, CPEn=1 */
241 ctrl2 |= CONTROL2_LOWPWR_MASK; /* LowPwr=1, CPEn=0 */
244 MAX8997_MUIC_REG_CONTROL2, ctrl2,
253 ctrl1, ctrl2, attached ? "attached" : "detached");
|
| H A D | extcon-max77693.c | 293 unsigned int ctrl1, ctrl2 = 0; local
308 ctrl2 |= CONTROL2_CPEN_MASK; /* LowPwr=0, CPEn=1 */
310 ctrl2 |= CONTROL2_LOWPWR_MASK; /* LowPwr=1, CPEn=0 */
314 CONTROL2_LOWPWR_MASK | CONTROL2_CPEN_MASK, ctrl2);
322 ctrl1, ctrl2, attached ? "attached" : "detached");
|
| /drivers/tty/serial/ |
| H A D | mxs-auart.c | 425 int ctrl2 = readl(u->membase + AUART_CTRL2); local
432 if (ctrl2 & AUART_CTRL2_RTS)
568 u32 bm, ctrl, ctrl2, div; local
574 ctrl2 = readl(u->membase + AUART_CTRL2);
630 ctrl2 |= AUART_CTRL2_RXE;
632 ctrl2 &= ~AUART_CTRL2_RXE;
650 ctrl2 |= AUART_CTRL2_TXDMAE | AUART_CTRL2_RXDMAE
653 ctrl2 |= AUART_CTRL2_CTSEN | AUART_CTRL2_RTSEN;
655 ctrl2 &= ~(AUART_CTRL2_CTSEN | AUART_CTRL2_RTSEN);
665 writel(ctrl2,
[all...] |
| /drivers/net/wireless/brcm80211/brcmsmac/ |
| H A D | dma.c | 202 __le32 ctrl2; /* buffer count and address extension */ member in struct:dma64desc
303 return parity32(dd->addrlow ^ dd->addrhigh ^ dd->ctrl1 ^ dd->ctrl2);
718 u32 ctrl2 = bufcount & D64_CTRL2_BC_MASK; local
725 ddring[outidx].ctrl2 = cpu_to_le32(ctrl2);
733 ctrl2 |= (ae << D64_CTRL2_AE_SHIFT) & D64_CTRL2_AE;
737 ddring[outidx].ctrl2 = cpu_to_le32(ctrl2);
741 ddring[outidx].ctrl2 =
742 cpu_to_le32(ctrl2 | D64_CTRL2_PARIT
[all...] |
| /drivers/usb/host/ |
| H A D | sl811.h | 146 u8 ctrl1, ctrl2, irq_enable; member in struct:sl811
|
| H A D | sl811-hcd.c | 1176 u8 ctrl2 = SL811HS_CTL2_INIT; local
1184 ctrl2 |= SL811HS_CTL2MASK_DSWAP;
1190 sl811_write(sl811, SL811HS_CTLREG2, ctrl2);
|
| /drivers/misc/lis3lv02d/ |
| H A D | lis3lv02d.c | 897 int ctrl2 = p->hipass_ctrl; local
922 ctrl2 ^= HP_FF_WU1; /* Xor to keep compatible with old pdata*/
930 ctrl2 ^= HP_FF_WU2; /* Xor to keep compatible with old pdata*/
933 lis3->write(lis3, CTRL_REG2, ctrl2);
|