1# 2# Intel network device configuration 3# 4 5config NET_VENDOR_INTEL 6 bool "Intel devices" 7 default y 8 ---help--- 9 If you have a network (Ethernet) card belonging to this class, say Y 10 and read the Ethernet-HOWTO, available from 11 <http://www.tldp.org/docs.html#howto>. 12 13 Note that the answer to this question doesn't directly affect the 14 kernel: saying N will just cause the configurator to skip all 15 the questions about Intel cards. If you say Y, you will be asked for 16 your specific card in the following questions. 17 18if NET_VENDOR_INTEL 19 20config E100 21 tristate "Intel(R) PRO/100+ support" 22 depends on PCI 23 select MII 24 ---help--- 25 This driver supports Intel(R) PRO/100 family of adapters. 26 To verify that your adapter is supported, find the board ID number 27 on the adapter. Look for a label that has a barcode and a number 28 in the format 123456-001 (six digits hyphen three digits). 29 30 Use the above information and the Adapter & Driver ID Guide at: 31 32 <http://support.intel.com/support/network/adapter/pro100/21397.htm> 33 34 to identify the adapter. 35 36 For the latest Intel PRO/100 network driver for Linux, see: 37 38 <http://www.intel.com/p/en_US/support/highlights/network/pro100plus> 39 40 More specific information on configuring the driver is in 41 <file:Documentation/networking/e100.txt>. 42 43 To compile this driver as a module, choose M here. The module 44 will be called e100. 45 46config E1000 47 tristate "Intel(R) PRO/1000 Gigabit Ethernet support" 48 depends on PCI 49 ---help--- 50 This driver supports Intel(R) PRO/1000 gigabit ethernet family of 51 adapters. For more information on how to identify your adapter, go 52 to the Adapter & Driver ID Guide at: 53 54 <http://support.intel.com/support/network/adapter/pro100/21397.htm> 55 56 For general information and support, go to the Intel support 57 website at: 58 59 <http://support.intel.com> 60 61 More specific information on configuring the driver is in 62 <file:Documentation/networking/e1000.txt>. 63 64 To compile this driver as a module, choose M here. The module 65 will be called e1000. 66 67config E1000E 68 tristate "Intel(R) PRO/1000 PCI-Express Gigabit Ethernet support" 69 depends on PCI && (!SPARC32 || BROKEN) 70 select CRC32 71 select PTP_1588_CLOCK 72 ---help--- 73 This driver supports the PCI-Express Intel(R) PRO/1000 gigabit 74 ethernet family of adapters. For PCI or PCI-X e1000 adapters, 75 use the regular e1000 driver For more information on how to 76 identify your adapter, go to the Adapter & Driver ID Guide at: 77 78 <http://support.intel.com/support/network/adapter/pro100/21397.htm> 79 80 For general information and support, go to the Intel support 81 website at: 82 83 <http://support.intel.com> 84 85 To compile this driver as a module, choose M here. The module 86 will be called e1000e. 87 88config IGB 89 tristate "Intel(R) 82575/82576 PCI-Express Gigabit Ethernet support" 90 depends on PCI 91 select PTP_1588_CLOCK 92 select I2C 93 select I2C_ALGOBIT 94 ---help--- 95 This driver supports Intel(R) 82575/82576 gigabit ethernet family of 96 adapters. For more information on how to identify your adapter, go 97 to the Adapter & Driver ID Guide at: 98 99 <http://support.intel.com/support/network/adapter/pro100/21397.htm> 100 101 For general information and support, go to the Intel support 102 website at: 103 104 <http://support.intel.com> 105 106 More specific information on configuring the driver is in 107 <file:Documentation/networking/e1000.txt>. 108 109 To compile this driver as a module, choose M here. The module 110 will be called igb. 111 112config IGB_HWMON 113 bool "Intel(R) PCI-Express Gigabit adapters HWMON support" 114 default y 115 depends on IGB && HWMON && !(IGB=y && HWMON=m) 116 ---help--- 117 Say Y if you want to expose thermal sensor data on Intel devices. 118 119 Some of our devices contain thermal sensors, both external and internal. 120 This data is available via the hwmon sysfs interface and exposes 121 the onboard sensors. 122 123config IGB_DCA 124 bool "Direct Cache Access (DCA) Support" 125 default y 126 depends on IGB && DCA && !(IGB=y && DCA=m) 127 ---help--- 128 Say Y here if you want to use Direct Cache Access (DCA) in the 129 driver. DCA is a method for warming the CPU cache before data 130 is used, with the intent of lessening the impact of cache misses. 131 132config IGBVF 133 tristate "Intel(R) 82576 Virtual Function Ethernet support" 134 depends on PCI 135 ---help--- 136 This driver supports Intel(R) 82576 virtual functions. For more 137 information on how to identify your adapter, go to the Adapter & 138 Driver ID Guide at: 139 140 <http://support.intel.com/support/network/adapter/pro100/21397.htm> 141 142 For general information and support, go to the Intel support 143 website at: 144 145 <http://support.intel.com> 146 147 More specific information on configuring the driver is in 148 <file:Documentation/networking/e1000.txt>. 149 150 To compile this driver as a module, choose M here. The module 151 will be called igbvf. 152 153config IXGB 154 tristate "Intel(R) PRO/10GbE support" 155 depends on PCI 156 ---help--- 157 This driver supports Intel(R) PRO/10GbE family of adapters for 158 PCI-X type cards. For PCI-E type cards, use the "ixgbe" driver 159 instead. For more information on how to identify your adapter, go 160 to the Adapter & Driver ID Guide at: 161 162 <http://support.intel.com/support/network/adapter/pro100/21397.htm> 163 164 For general information and support, go to the Intel support 165 website at: 166 167 <http://support.intel.com> 168 169 More specific information on configuring the driver is in 170 <file:Documentation/networking/ixgb.txt>. 171 172 To compile this driver as a module, choose M here. The module 173 will be called ixgb. 174 175config IXGBE 176 tristate "Intel(R) 10GbE PCI Express adapters support" 177 depends on PCI 178 select MDIO 179 select PTP_1588_CLOCK 180 ---help--- 181 This driver supports Intel(R) 10GbE PCI Express family of 182 adapters. For more information on how to identify your adapter, go 183 to the Adapter & Driver ID Guide at: 184 185 <http://support.intel.com/support/network/adapter/pro100/21397.htm> 186 187 For general information and support, go to the Intel support 188 website at: 189 190 <http://support.intel.com> 191 192 To compile this driver as a module, choose M here. The module 193 will be called ixgbe. 194 195config IXGBE_HWMON 196 bool "Intel(R) 10GbE PCI Express adapters HWMON support" 197 default y 198 depends on IXGBE && HWMON && !(IXGBE=y && HWMON=m) 199 ---help--- 200 Say Y if you want to expose the thermal sensor data on some of 201 our cards, via a hwmon sysfs interface. 202 203config IXGBE_DCA 204 bool "Direct Cache Access (DCA) Support" 205 default y 206 depends on IXGBE && DCA && !(IXGBE=y && DCA=m) 207 ---help--- 208 Say Y here if you want to use Direct Cache Access (DCA) in the 209 driver. DCA is a method for warming the CPU cache before data 210 is used, with the intent of lessening the impact of cache misses. 211 212config IXGBE_DCB 213 bool "Data Center Bridging (DCB) Support" 214 default n 215 depends on IXGBE && DCB 216 ---help--- 217 Say Y here if you want to use Data Center Bridging (DCB) in the 218 driver. 219 220 If unsure, say N. 221 222config IXGBEVF 223 tristate "Intel(R) 10GbE PCI Express Virtual Function Ethernet support" 224 depends on PCI_MSI 225 ---help--- 226 This driver supports Intel(R) PCI Express virtual functions for the 227 Intel(R) ixgbe driver. For more information on how to identify your 228 adapter, go to the Adapter & Driver ID Guide at: 229 230 <http://support.intel.com/support/network/sb/CS-008441.htm> 231 232 For general information and support, go to the Intel support 233 website at: 234 235 <http://support.intel.com> 236 237 More specific information on configuring the driver is in 238 <file:Documentation/networking/ixgbevf.txt>. 239 240 To compile this driver as a module, choose M here. The module 241 will be called ixgbevf. MSI-X interrupt support is required 242 for this driver to work correctly. 243 244config I40E 245 tristate "Intel(R) Ethernet Controller XL710 Family support" 246 select PTP_1588_CLOCK 247 depends on PCI 248 ---help--- 249 This driver supports Intel(R) Ethernet Controller XL710 Family of 250 devices. For more information on how to identify your adapter, go 251 to the Adapter & Driver ID Guide at: 252 253 <http://support.intel.com/support/network/adapter/pro100/21397.htm> 254 255 For general information and support, go to the Intel support 256 website at: 257 258 <http://support.intel.com> 259 260 To compile this driver as a module, choose M here. The module 261 will be called i40e. 262 263config I40E_VXLAN 264 bool "Virtual eXtensible Local Area Network Support" 265 default n 266 depends on I40E && VXLAN && !(I40E=y && VXLAN=m) 267 ---help--- 268 This allows one to create VXLAN virtual interfaces that provide 269 Layer 2 Networks over Layer 3 Networks. VXLAN is often used 270 to tunnel virtual network infrastructure in virtualized environments. 271 Say Y here if you want to use Virtual eXtensible Local Area Network 272 (VXLAN) in the driver. 273 274config I40E_DCB 275 bool "Data Center Bridging (DCB) Support" 276 default n 277 depends on I40E && DCB 278 ---help--- 279 Say Y here if you want to use Data Center Bridging (DCB) in the 280 driver. 281 282 If unsure, say N. 283 284config I40EVF 285 tristate "Intel(R) XL710 X710 Virtual Function Ethernet support" 286 depends on PCI_MSI 287 ---help--- 288 This driver supports Intel(R) XL710 and X710 virtual functions. 289 For more information on how to identify your adapter, go to the 290 Adapter & Driver ID Guide at: 291 292 <http://support.intel.com/support/network/sb/CS-008441.htm> 293 294 For general information and support, go to the Intel support 295 website at: 296 297 <http://support.intel.com> 298 299 To compile this driver as a module, choose M here. The module 300 will be called i40evf. MSI-X interrupt support is required 301 for this driver to work correctly. 302 303config FM10K 304 tristate "Intel(R) FM10000 Ethernet Switch Host Interface Support" 305 default n 306 depends on PCI_MSI 307 select PTP_1588_CLOCK 308 ---help--- 309 This driver supports Intel(R) FM10000 Ethernet Switch Host 310 Interface. For more information on how to identify your adapter, 311 go to the Adapter & Driver ID Guide at: 312 313 <http://support.intel.com/support/network/sb/CS-008441.htm> 314 315 For general information and support, go to the Intel support 316 website at: 317 318 <http://support.intel.com> 319 320 To compile this driver as a module, choose M here. The module 321 will be called fm10k. MSI-X interrupt support is required 322 323config FM10K_VXLAN 324 bool "Virtual eXtensible Local Area Network Support" 325 default n 326 depends on FM10K && VXLAN && !(FM10K=y && VXLAN=m) 327 ---help--- 328 This allows one to create VXLAN virtual interfaces that provide 329 Layer 2 Networks over Layer 3 Networks. VXLAN is often used 330 to tunnel virtual network infrastructure in virtualized environments. 331 Say Y here if you want to use Virtual eXtensible Local Area Network 332 (VXLAN) in the driver. 333 334endif # NET_VENDOR_INTEL 335