1/******************************************************************************* 2 This is the driver for the MAC 10/100 on-chip Ethernet controller 3 currently tested on all the ST boards based on STb7109 and stx7200 SoCs. 4 5 DWC Ether MAC 10/100 Universal version 4.0 has been used for developing 6 this code. 7 8 This contains the functions to handle the dma. 9 10 Copyright (C) 2007-2009 STMicroelectronics Ltd 11 12 This program is free software; you can redistribute it and/or modify it 13 under the terms and conditions of the GNU General Public License, 14 version 2, as published by the Free Software Foundation. 15 16 This program is distributed in the hope it will be useful, but WITHOUT 17 ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 18 FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 19 more details. 20 21 You should have received a copy of the GNU General Public License along with 22 this program; if not, write to the Free Software Foundation, Inc., 23 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. 24 25 The full GNU General Public License is included in this distribution in 26 the file called "COPYING". 27 28 Author: Giuseppe Cavallaro <peppe.cavallaro@st.com> 29*******************************************************************************/ 30 31#include <asm/io.h> 32#include "dwmac100.h" 33#include "dwmac_dma.h" 34 35static int dwmac100_dma_init(void __iomem *ioaddr, int pbl, int fb, int mb, 36 int burst_len, u32 dma_tx, u32 dma_rx, int atds) 37{ 38 u32 value = readl(ioaddr + DMA_BUS_MODE); 39 int limit; 40 41 /* DMA SW reset */ 42 value |= DMA_BUS_MODE_SFT_RESET; 43 writel(value, ioaddr + DMA_BUS_MODE); 44 limit = 10; 45 while (limit--) { 46 if (!(readl(ioaddr + DMA_BUS_MODE) & DMA_BUS_MODE_SFT_RESET)) 47 break; 48 mdelay(10); 49 } 50 if (limit < 0) 51 return -EBUSY; 52 53 /* Enable Application Access by writing to DMA CSR0 */ 54 writel(DMA_BUS_MODE_DEFAULT | (pbl << DMA_BUS_MODE_PBL_SHIFT), 55 ioaddr + DMA_BUS_MODE); 56 57 /* Mask interrupts by writing to CSR7 */ 58 writel(DMA_INTR_DEFAULT_MASK, ioaddr + DMA_INTR_ENA); 59 60 /* RX/TX descriptor base addr lists must be written into 61 * DMA CSR3 and CSR4, respectively 62 */ 63 writel(dma_tx, ioaddr + DMA_TX_BASE_ADDR); 64 writel(dma_rx, ioaddr + DMA_RCV_BASE_ADDR); 65 66 return 0; 67} 68 69/* Store and Forward capability is not used at all. 70 * 71 * The transmit threshold can be programmed by setting the TTC bits in the DMA 72 * control register. 73 */ 74static void dwmac100_dma_operation_mode(void __iomem *ioaddr, int txmode, 75 int rxmode) 76{ 77 u32 csr6 = readl(ioaddr + DMA_CONTROL); 78 79 if (txmode <= 32) 80 csr6 |= DMA_CONTROL_TTC_32; 81 else if (txmode <= 64) 82 csr6 |= DMA_CONTROL_TTC_64; 83 else 84 csr6 |= DMA_CONTROL_TTC_128; 85 86 writel(csr6, ioaddr + DMA_CONTROL); 87} 88 89static void dwmac100_dump_dma_regs(void __iomem *ioaddr) 90{ 91 int i; 92 93 pr_debug("DWMAC 100 DMA CSR\n"); 94 for (i = 0; i < 9; i++) 95 pr_debug("\t CSR%d (offset 0x%x): 0x%08x\n", i, 96 (DMA_BUS_MODE + i * 4), 97 readl(ioaddr + DMA_BUS_MODE + i * 4)); 98 99 pr_debug("\tCSR20 (0x%x): 0x%08x, CSR21 (0x%x): 0x%08x\n", 100 DMA_CUR_TX_BUF_ADDR, readl(ioaddr + DMA_CUR_TX_BUF_ADDR), 101 DMA_CUR_RX_BUF_ADDR, readl(ioaddr + DMA_CUR_RX_BUF_ADDR)); 102} 103 104/* DMA controller has two counters to track the number of the missed frames. */ 105static void dwmac100_dma_diagnostic_fr(void *data, struct stmmac_extra_stats *x, 106 void __iomem *ioaddr) 107{ 108 struct net_device_stats *stats = (struct net_device_stats *)data; 109 u32 csr8 = readl(ioaddr + DMA_MISSED_FRAME_CTR); 110 111 if (unlikely(csr8)) { 112 if (csr8 & DMA_MISSED_FRAME_OVE) { 113 stats->rx_over_errors += 0x800; 114 x->rx_overflow_cntr += 0x800; 115 } else { 116 unsigned int ove_cntr; 117 ove_cntr = ((csr8 & DMA_MISSED_FRAME_OVE_CNTR) >> 17); 118 stats->rx_over_errors += ove_cntr; 119 x->rx_overflow_cntr += ove_cntr; 120 } 121 122 if (csr8 & DMA_MISSED_FRAME_OVE_M) { 123 stats->rx_missed_errors += 0xffff; 124 x->rx_missed_cntr += 0xffff; 125 } else { 126 unsigned int miss_f = (csr8 & DMA_MISSED_FRAME_M_CNTR); 127 stats->rx_missed_errors += miss_f; 128 x->rx_missed_cntr += miss_f; 129 } 130 } 131} 132 133const struct stmmac_dma_ops dwmac100_dma_ops = { 134 .init = dwmac100_dma_init, 135 .dump_regs = dwmac100_dump_dma_regs, 136 .dma_mode = dwmac100_dma_operation_mode, 137 .dma_diagnostic_fr = dwmac100_dma_diagnostic_fr, 138 .enable_dma_transmission = dwmac_enable_dma_transmission, 139 .enable_dma_irq = dwmac_enable_dma_irq, 140 .disable_dma_irq = dwmac_disable_dma_irq, 141 .start_tx = dwmac_dma_start_tx, 142 .stop_tx = dwmac_dma_stop_tx, 143 .start_rx = dwmac_dma_start_rx, 144 .stop_rx = dwmac_dma_stop_rx, 145 .dma_interrupt = dwmac_dma_interrupt, 146}; 147