1/* 2 * This file contains the handling of RX in wlan driver. 3 */ 4 5#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt 6 7#include <linux/etherdevice.h> 8#include <linux/hardirq.h> 9#include <linux/slab.h> 10#include <linux/types.h> 11#include <linux/export.h> 12#include <net/cfg80211.h> 13 14#include "defs.h" 15#include "host.h" 16#include "radiotap.h" 17#include "decl.h" 18#include "dev.h" 19#include "mesh.h" 20 21struct eth803hdr { 22 u8 dest_addr[6]; 23 u8 src_addr[6]; 24 u16 h803_len; 25} __packed; 26 27struct rfc1042hdr { 28 u8 llc_dsap; 29 u8 llc_ssap; 30 u8 llc_ctrl; 31 u8 snap_oui[3]; 32 u16 snap_type; 33} __packed; 34 35struct rxpackethdr { 36 struct eth803hdr eth803_hdr; 37 struct rfc1042hdr rfc1042_hdr; 38} __packed; 39 40struct rx80211packethdr { 41 struct rxpd rx_pd; 42 void *eth80211_hdr; 43} __packed; 44 45static int process_rxed_802_11_packet(struct lbs_private *priv, 46 struct sk_buff *skb); 47 48/** 49 * lbs_process_rxed_packet - processes received packet and forwards it 50 * to kernel/upper layer 51 * 52 * @priv: A pointer to &struct lbs_private 53 * @skb: A pointer to skb which includes the received packet 54 * returns: 0 or -1 55 */ 56int lbs_process_rxed_packet(struct lbs_private *priv, struct sk_buff *skb) 57{ 58 int ret = 0; 59 struct net_device *dev = priv->dev; 60 struct rxpackethdr *p_rx_pkt; 61 struct rxpd *p_rx_pd; 62 int hdrchop; 63 struct ethhdr *p_ethhdr; 64 static const u8 rfc1042_eth_hdr[] = { 65 0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00 66 }; 67 68 lbs_deb_enter(LBS_DEB_RX); 69 70 BUG_ON(!skb); 71 72 skb->ip_summed = CHECKSUM_NONE; 73 74 if (priv->wdev->iftype == NL80211_IFTYPE_MONITOR) { 75 ret = process_rxed_802_11_packet(priv, skb); 76 goto done; 77 } 78 79 p_rx_pd = (struct rxpd *) skb->data; 80 p_rx_pkt = (struct rxpackethdr *) ((u8 *)p_rx_pd + 81 le32_to_cpu(p_rx_pd->pkt_ptr)); 82 83 dev = lbs_mesh_set_dev(priv, dev, p_rx_pd); 84 85 lbs_deb_hex(LBS_DEB_RX, "RX Data: Before chop rxpd", skb->data, 86 min_t(unsigned int, skb->len, 100)); 87 88 if (skb->len < (ETH_HLEN + 8 + sizeof(struct rxpd))) { 89 lbs_deb_rx("rx err: frame received with bad length\n"); 90 dev->stats.rx_length_errors++; 91 ret = -EINVAL; 92 dev_kfree_skb(skb); 93 goto done; 94 } 95 96 lbs_deb_rx("rx data: skb->len - pkt_ptr = %d-%zd = %zd\n", 97 skb->len, (size_t)le32_to_cpu(p_rx_pd->pkt_ptr), 98 skb->len - (size_t)le32_to_cpu(p_rx_pd->pkt_ptr)); 99 100 lbs_deb_hex(LBS_DEB_RX, "RX Data: Dest", p_rx_pkt->eth803_hdr.dest_addr, 101 sizeof(p_rx_pkt->eth803_hdr.dest_addr)); 102 lbs_deb_hex(LBS_DEB_RX, "RX Data: Src", p_rx_pkt->eth803_hdr.src_addr, 103 sizeof(p_rx_pkt->eth803_hdr.src_addr)); 104 105 if (memcmp(&p_rx_pkt->rfc1042_hdr, 106 rfc1042_eth_hdr, sizeof(rfc1042_eth_hdr)) == 0) { 107 /* 108 * Replace the 803 header and rfc1042 header (llc/snap) with an 109 * EthernetII header, keep the src/dst and snap_type (ethertype) 110 * 111 * The firmware only passes up SNAP frames converting 112 * all RX Data from 802.11 to 802.2/LLC/SNAP frames. 113 * 114 * To create the Ethernet II, just move the src, dst address right 115 * before the snap_type. 116 */ 117 p_ethhdr = (struct ethhdr *) 118 ((u8 *) &p_rx_pkt->eth803_hdr 119 + sizeof(p_rx_pkt->eth803_hdr) + sizeof(p_rx_pkt->rfc1042_hdr) 120 - sizeof(p_rx_pkt->eth803_hdr.dest_addr) 121 - sizeof(p_rx_pkt->eth803_hdr.src_addr) 122 - sizeof(p_rx_pkt->rfc1042_hdr.snap_type)); 123 124 memcpy(p_ethhdr->h_source, p_rx_pkt->eth803_hdr.src_addr, 125 sizeof(p_ethhdr->h_source)); 126 memcpy(p_ethhdr->h_dest, p_rx_pkt->eth803_hdr.dest_addr, 127 sizeof(p_ethhdr->h_dest)); 128 129 /* Chop off the rxpd + the excess memory from the 802.2/llc/snap header 130 * that was removed 131 */ 132 hdrchop = (u8 *)p_ethhdr - (u8 *)p_rx_pd; 133 } else { 134 lbs_deb_hex(LBS_DEB_RX, "RX Data: LLC/SNAP", 135 (u8 *) &p_rx_pkt->rfc1042_hdr, 136 sizeof(p_rx_pkt->rfc1042_hdr)); 137 138 /* Chop off the rxpd */ 139 hdrchop = (u8 *)&p_rx_pkt->eth803_hdr - (u8 *)p_rx_pd; 140 } 141 142 /* Chop off the leading header bytes so the skb points to the start of 143 * either the reconstructed EthII frame or the 802.2/llc/snap frame 144 */ 145 skb_pull(skb, hdrchop); 146 147 priv->cur_rate = lbs_fw_index_to_data_rate(p_rx_pd->rx_rate); 148 149 lbs_deb_rx("rx data: size of actual packet %d\n", skb->len); 150 dev->stats.rx_bytes += skb->len; 151 dev->stats.rx_packets++; 152 153 skb->protocol = eth_type_trans(skb, dev); 154 if (in_interrupt()) 155 netif_rx(skb); 156 else 157 netif_rx_ni(skb); 158 159 ret = 0; 160done: 161 lbs_deb_leave_args(LBS_DEB_RX, "ret %d", ret); 162 return ret; 163} 164EXPORT_SYMBOL_GPL(lbs_process_rxed_packet); 165 166/** 167 * convert_mv_rate_to_radiotap - converts Tx/Rx rates from Marvell WLAN format 168 * (see Table 2 in Section 3.1) to IEEE80211_RADIOTAP_RATE units (500 Kb/s) 169 * 170 * @rate: Input rate 171 * returns: Output Rate (0 if invalid) 172 */ 173static u8 convert_mv_rate_to_radiotap(u8 rate) 174{ 175 switch (rate) { 176 case 0: /* 1 Mbps */ 177 return 2; 178 case 1: /* 2 Mbps */ 179 return 4; 180 case 2: /* 5.5 Mbps */ 181 return 11; 182 case 3: /* 11 Mbps */ 183 return 22; 184 /* case 4: reserved */ 185 case 5: /* 6 Mbps */ 186 return 12; 187 case 6: /* 9 Mbps */ 188 return 18; 189 case 7: /* 12 Mbps */ 190 return 24; 191 case 8: /* 18 Mbps */ 192 return 36; 193 case 9: /* 24 Mbps */ 194 return 48; 195 case 10: /* 36 Mbps */ 196 return 72; 197 case 11: /* 48 Mbps */ 198 return 96; 199 case 12: /* 54 Mbps */ 200 return 108; 201 } 202 pr_alert("Invalid Marvell WLAN rate %i\n", rate); 203 return 0; 204} 205 206/** 207 * process_rxed_802_11_packet - processes a received 802.11 packet and forwards 208 * it to kernel/upper layer 209 * 210 * @priv: A pointer to &struct lbs_private 211 * @skb: A pointer to skb which includes the received packet 212 * returns: 0 or -1 213 */ 214static int process_rxed_802_11_packet(struct lbs_private *priv, 215 struct sk_buff *skb) 216{ 217 int ret = 0; 218 struct net_device *dev = priv->dev; 219 struct rx80211packethdr *p_rx_pkt; 220 struct rxpd *prxpd; 221 struct rx_radiotap_hdr radiotap_hdr; 222 struct rx_radiotap_hdr *pradiotap_hdr; 223 224 lbs_deb_enter(LBS_DEB_RX); 225 226 p_rx_pkt = (struct rx80211packethdr *) skb->data; 227 prxpd = &p_rx_pkt->rx_pd; 228 229 /* lbs_deb_hex(LBS_DEB_RX, "RX Data: Before chop rxpd", skb->data, min(skb->len, 100)); */ 230 231 if (skb->len < (ETH_HLEN + 8 + sizeof(struct rxpd))) { 232 lbs_deb_rx("rx err: frame received with bad length\n"); 233 dev->stats.rx_length_errors++; 234 ret = -EINVAL; 235 kfree_skb(skb); 236 goto done; 237 } 238 239 lbs_deb_rx("rx data: skb->len-sizeof(RxPd) = %d-%zd = %zd\n", 240 skb->len, sizeof(struct rxpd), skb->len - sizeof(struct rxpd)); 241 242 /* create the exported radio header */ 243 244 /* radiotap header */ 245 memset(&radiotap_hdr, 0, sizeof(radiotap_hdr)); 246 /* XXX must check radiotap_hdr.hdr.it_pad for pad */ 247 radiotap_hdr.hdr.it_len = cpu_to_le16 (sizeof(struct rx_radiotap_hdr)); 248 radiotap_hdr.hdr.it_present = cpu_to_le32 (RX_RADIOTAP_PRESENT); 249 radiotap_hdr.rate = convert_mv_rate_to_radiotap(prxpd->rx_rate); 250 /* XXX must check no carryout */ 251 radiotap_hdr.antsignal = prxpd->snr + prxpd->nf; 252 253 /* chop the rxpd */ 254 skb_pull(skb, sizeof(struct rxpd)); 255 256 /* add space for the new radio header */ 257 if ((skb_headroom(skb) < sizeof(struct rx_radiotap_hdr)) && 258 pskb_expand_head(skb, sizeof(struct rx_radiotap_hdr), 0, GFP_ATOMIC)) { 259 netdev_alert(dev, "%s: couldn't pskb_expand_head\n", __func__); 260 ret = -ENOMEM; 261 kfree_skb(skb); 262 goto done; 263 } 264 265 pradiotap_hdr = (void *)skb_push(skb, sizeof(struct rx_radiotap_hdr)); 266 memcpy(pradiotap_hdr, &radiotap_hdr, sizeof(struct rx_radiotap_hdr)); 267 268 priv->cur_rate = lbs_fw_index_to_data_rate(prxpd->rx_rate); 269 270 lbs_deb_rx("rx data: size of actual packet %d\n", skb->len); 271 dev->stats.rx_bytes += skb->len; 272 dev->stats.rx_packets++; 273 274 skb->protocol = eth_type_trans(skb, priv->dev); 275 276 if (in_interrupt()) 277 netif_rx(skb); 278 else 279 netif_rx_ni(skb); 280 281 ret = 0; 282 283done: 284 lbs_deb_leave_args(LBS_DEB_RX, "ret %d", ret); 285 return ret; 286} 287