4ff248f3bf830ba22c988abb099e1836fbd3b1d0 |
|
22-May-2014 |
Manuel Schölling <manuel.schoelling@gmx.de> |
ACPI / PAD: Use time_before() for time comparison To be future-proof and for better readability the time comparisons are modified to use time_before() instead of plain, error-prone math. Signed-off-by: Manuel Schölling <manuel.schoelling@gmx.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
5b59c69ec54849f23b51d18b0a609c4f793bc35a |
|
25-Apr-2014 |
Tony Camuso <tcamuso@redhat.com> |
ACPI / PAD: call schedule() when need_resched() is true The purpose of the acpi_pad driver is to implement the "processor power aggregator" device as described in the ACPI 4.0 spec section 8.5. It takes requests from the BIOS (via ACPI) to put a specified number of CPUs into idle, in order to save power, until further notice. It does this by creating high-priority threads that try to keep the CPUs in a high C-state (using the monitor/mwait CPU instructions). The mwait() call is in a loop that checks periodically if the thread should end and a few other things. It was discovered through testing that the power_saving threads were causing the system to consume more power than the system was consuming before the threads were created. A counter in the main loop of power_saving_thread() revealed that it was spinning. The mwait() instruction was not keeping the CPU in a high C state very much if at all. Here is a simplification of the loop in function power_saving_thread() in drivers/acpi/acpi_pad.c while (!kthread_should_stop()) { : try_to_freeze() : while (!need_resched()) { : if (!need_resched()) __mwait(power_saving_mwait_eax, 1); : if (jiffies > expire_time) { do_sleep = 1; break; } } } If need_resched() returns true, then mwait() is not called. It was returning true because of things like timer interrupts, as in the following sequence. hrtimer_interrupt->__run_hrtimer->tick_sched_timer-> update_process_times-> rcu_check_callbacks->rcu_pending->__rcu_pending->set_need_resched Kernels 3.5.0-rc2+ do not exhibit this problem, because a patch to try_to_freeze() in include/linux/freezer.h introduces a call to might_sleep(), which ultimately calls schedule() to clear the reschedule flag and allows the the loop to execute the call to mwait(). However, the changes to try_to_freeze are unrelated to acpi_pad, and it does not seem like a good idea to rely on an unrelated patch in a function that could later be changed and reintroduce this bug. Therefore, it seems better to make an explicit call to schedule() in the outer loop when the need_resched flag is set. Reported-and-tested-by: Stuart Hayes <stuart_hayes@dell.com> Signed-off-by: Tony Camuso <tcamuso@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
8b296d9412a087c1e2191d3e7448c76d9498714f |
|
19-Feb-2014 |
Jiang Liu <jiang.liu@linux.intel.com> |
ACPI / PAD: use acpi_evaluate_ost() to replace open-coded version Use public function acpi_evaluate_ost() to replace open-coded version of evaluating ACPI _OST method. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
16824255394f55adf31b9a96a9965d8c15bdac4c |
|
12-Dec-2013 |
Peter Zijlstra <peterz@infradead.org> |
x86, acpi, idle: Restructure the mwait idle routines People seem to delight in writing wrong and broken mwait idle routines; collapse the lot. This leaves mwait_play_dead() the sole remaining user of __mwait() and new __mwait() users are probably doing it wrong. Also remove __sti_mwait() as its unused. Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Jacob Jun Pan <jacob.jun.pan@linux.intel.com> Cc: Mike Galbraith <bitbucket@online.de> Cc: Len Brown <lenb@kernel.org> Cc: Rui Zhang <rui.zhang@intel.com> Acked-by: Rafael Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20131212141654.616820819@infradead.org Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
|
8b48463f89429af408ff695244dc627e1acff4f7 |
|
03-Dec-2013 |
Lv Zheng <lv.zheng@intel.com> |
ACPI: Clean up inclusions of ACPI header files Replace direct inclusions of <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h>, which are incorrect, with <linux/acpi.h> inclusions and remove some inclusions of those files that aren't necessary. First of all, <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h> should not be included directly from any files that are built for CONFIG_ACPI unset, because that generally leads to build warnings about undefined symbols in !CONFIG_ACPI builds. For CONFIG_ACPI set, <linux/acpi.h> includes those files and for CONFIG_ACPI unset it provides stub ACPI symbols to be used in that case. Second, there are ordering dependencies between those files that always have to be met. Namely, it is required that <acpi/acpi_bus.h> be included prior to <acpi/acpi_drivers.h> so that the acpi_pci_root declarations the latter depends on are always there. And <acpi/acpi.h> which provides basic ACPICA type declarations should always be included prior to any other ACPI headers in CONFIG_ACPI builds. That also is taken care of including <linux/acpi.h> as appropriate. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Tony Luck <tony.luck@intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> (drivers/pci stuff) Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> (Xen stuff) Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
1696d9dc57e062ce5200f6a42a6aaada15b434bb |
|
15-Jul-2013 |
Thomas Renninger <trenn@suse.de> |
ACPI: Remove the old /proc/acpi/event interface It is quite some time that this one has been deprecated. Get rid of it. Should some really important user be overseen, it may be reverted and the userspace program worked on first, but it is time to do something to get rid of this old stuff... Signed-off-by: Thomas Renninger <trenn@suse.de> Acked-by: Matthew Garrett <matthew.garrett@nebula.com> Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
5d7e438629413586ab78779751caa6e713c2234c |
|
15-Jul-2013 |
Rusty Russell <rusty@rustcorp.com.au> |
acpi: Replace weird use of PTR_RET. This functions is really weird. It sets rc to -ENOMEM, then overrides it. It was converted to PTR_RET in a1458187 when it should have simply been rewritten. This version makes it more explicit, with a single IS_ERR() test. Cc: Alexandru Gheorghiu <gheorghiuandru@gmail.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
a1458187ae66825871c93b6b56ca2cd1d88e9cb9 |
|
12-Mar-2013 |
Alexandru Gheorghiu <gheorghiuandru@gmail.com> |
ACPI / acpi_pad: Used PTR_RET Use PTR_RET instead of explicit checking with IS_ERR. Signed-off-by: Alexandru Gheorghiu <gheorghiuandru@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
51fac8388a0325a43f0ae67453ece2c373e2ec28 |
|
24-Jan-2013 |
Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
ACPI: Remove useless type argument of driver .remove() operation The second argument of ACPI driver .remove() operation is only used by the ACPI processor driver and the value passed to that driver through it is always available from the given struct acpi_device object's removal_type field. For this reason, the second ACPI driver .remove() argument is in fact useless, so drop it. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Jiang Liu <jiang.liu@huawei.com> Acked-by: Toshi Kani <toshi.kani@hp.com> Acked-by: Yinghai Lu <yinghai@kernel.org>
|
73d4511a5f1e208399b2f7a058b73578c1977611 |
|
23-Oct-2012 |
Josh <joshua.taylor0@gmail.com> |
ACPI: strict_strtoul() and printk() cleanup in acpi_pad Replace a few calls to strict_strtoul() in acpi_pad.c with kstrtoul() and use pr_warn() instead of printk() in the same file. [rjw: Modified the subject and changelog.] Signed-off-by: Josh Taylor <joshua.taylor0@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
fa7584e13ac8e6a306085bba0a931f3135f1d8c4 |
|
14-Jun-2012 |
Len Brown <len.brown@intel.com> |
ACPI: acpi_pad: tune round_robin_time In an effort to be fair to bound processes, acpi_pad periodically moves its forced-idle threads. The default interval for moving the threads is 10 seconds. Measurements show that reducing this to 1 second has no power or performance impact, so reduce default to 1 second. Signed-off-by: Len Brown <len.brown@intel.com>
|
5f1601261050251a5ca293378b492a69d590dacb |
|
13-Jun-2012 |
Stuart Hayes <Stuart_Hayes@Dell.com> |
acpi_pad: fix power_saving thread deadlock The acpi_pad driver can get stuck in destroy_power_saving_task() waiting for kthread_stop() to stop a power_saving thread. The problem is that the isolated_cpus_lock mutex is owned when destroy_power_saving_task() calls kthread_stop(), which waits for a power_saving thread to end, and the power_saving thread tries to acquire the isolated_cpus_lock when it calls round_robin_cpu(). This patch fixes the issue by making round_robin_cpu() use its own mutex. https://bugzilla.kernel.org/show_bug.cgi?id=42981 Cc: stable@vger.kernel.org Signed-off-by: Stuart Hayes <Stuart_Hayes@Dell.com> Signed-off-by: Len Brown <len.brown@intel.com>
|
150ed86fade791d82319b27e84a7a6d2de84d1fa |
|
14-Jun-2012 |
Len Brown <len.brown@intel.com> |
ACPI: acpi_pad: rename "power_saving" thread to "acpi_pad" thread "acpi_pad/%d" is a better thread name than generic "power_saving/%d" because users who see these threads will know the name of the driver that caused them. Signed-off-by: Len Brown <len.brown@intel.com>
|
cdf2a4eeded69f66ec8c5098c375fe49e0820127 |
|
03-Feb-2011 |
Naga Chumbalkar <nagananda.chumbalkar@hp.com> |
ACPI: minor printk format change in acpi_pad Minor format change. Signed-off-by: Naga Chumbalkar <nagananda.chumbalkar@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
|
32297abd90a5d181e8e026c8b8e65ef41e9ffc07 |
|
03-Feb-2011 |
Naga Chumbalkar <nagananda.chumbalkar@hp.com> |
ACPI: make acpi_pad /sys output more readable Make /sys output from acpi_pad more readable. Before the fix: # cat idlecpus idlepct rrtime 00000000510 After the fix: # cat idlecpus idlepct rrtime 00000000 5 10 Signed-off-by: Naga Chumbalkar <nagananda.chumbalkar@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
|
c9ad8e062e4c733b36fc10ebc201bedde1a4da80 |
|
28-Sep-2010 |
Len Brown <len.brown@intel.com> |
ACPI: acpi_pad: simplify code to avoid false gcc build warning acpi_pad.c:432: warning: ‘num_cpus’ may be used uninitialized in this function gcc 4.4.4 was unable to notice that num_cpus is always set. Re-arrange the code to un-confuse gcc, and also make it easier for humans to read.... Signed-off-by: Len Brown <len.browns@intel.com>
|
bc83cccc761953f878088cdfa682de0970b5561f |
|
18-Sep-2010 |
H. Peter Anvin <hpa@linux.intel.com> |
x86, mwait: Move mwait constants to a common header file We have MWAIT constants spread across three different .c files, for no good reason. Move them all into a common header file. Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Reviewed-by: Arjan van de Ven <arjan@linux.intel.com> Cc: Len Brown <lenb@kernel.org> LKML-Reference: <tip-*@git.kernel.org>
|
592913ecb87a9e06f98ddb55b298f1a66bf94c6b |
|
14-Jul-2010 |
John Stultz <johnstul@us.ibm.com> |
time: Kill off CONFIG_GENERIC_TIME Now that all arches have been converted over to use generic time via clocksources or arch_gettimeoffset(), we can remove the GENERIC_TIME config option and simplify the generic code. Signed-off-by: John Stultz <johnstul@us.ibm.com> LKML-Reference: <1279068988-21864-4-git-send-email-johnstul@us.ibm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
8aa4b14eb023fecaa48d55402e98bdf84b375c4a |
|
30-May-2010 |
Chen Gong <gong.chen@linux.intel.com> |
ACPI: acpi_pad: Don't needlessly mark LAPIC unstable As suggested in Venki's suggestion in the commit 0dc698b, add LAPIC unstable detection in the acpi_pad drvier too. Signed-off-by: Chen Gong <gong.chen@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
|
0dc698b93f3eecdda43b22232131324eb41e510c |
|
18-May-2010 |
Venkatesh Pallipadi <venki@google.com> |
ACPI: Don't let acpi_pad needlessly mark TSC unstable acpi pad driver kind of aggressively marks TSC as unstable at init time, on mwait capable and non X86_FEATURE_NONSTOP_TSC systems. This is irrespective of whether pad driver is ever going to be used on the system or deep C-states are supported/used. This will affect every user who just happens to compile in (or get a kernel version which compiles in) acpi pad driver. Move mark_tsc_unstable() out of init to the actual idle invocation path of the pad driver. There is also another bug/missing_feature in the code that it does not support 'always running apic timer' and switches to broadcast mode unconditionally. Shaohua, can you take a look at that please. Signed-off-by: Venkatesh Pallipadi <venki@google.com> Signed-off-by: Len Brown <len.brown@intel.com>
|
a7d27c37533524e23bbdc9ba1d78e3241b7483ea |
|
24-May-2010 |
Len Brown <len.brown@intel.com> |
acpi_pad: uses MONITOR/MWAIT, so it doesn't need to clear TS_POLLING api_pad exclusively uses MONITOR/MWAIT to sleep in idle, so it does not need the wakeup IPI during idle sleep that is provoked by clearing TS_POLLING. Signed-off-by: Len Brown <len.brown@intel.com> Cc: Shaohua Li <shaohua.li@intel.com>
|
a40770a9537c72b555667851845e73484b22ba17 |
|
27-Apr-2010 |
Dan Carpenter <error27@gmail.com> |
acpi_pad: "processor_aggregator" name too long cpi_device_class can only be 19 characters and a NULL terminator. With the current name we get a buffer overflow in acpi_pad_add() strcpy(acpi_device_class(device), ACPI_PROCESSOR_AGGREGATOR_CLASS); [akpm@linux-foundation.org: call it acpi_pad, per Shaohua Li] Signed-off-by: Dan Carpenter <error27@gmail.com> Cc: walter harms <wharms@bfs.de> Acked-by: Shaohua Li <shaohua.li@intel.com> Cc: Len Brown <lenb@kernel.org> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Len Brown <len.brown@intel.com>
|
5a0e3ad6af8660be21ca98a971cd00f331318c05 |
|
24-Mar-2010 |
Tejun Heo <tj@kernel.org> |
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
|
3b8cb427e9281790f36e847e46cb1d005a50cec0 |
|
14-Dec-2009 |
Chen Gong <gong.chen@linux.intel.com> |
acpi_pad: fix error checks There are some fixes listed below: 1. When met a bogus BIOS, the return value of cpu number maybe is a negative value so that acpi_pad_pur get an unexpected result. 2. the return value of function acpi_pad_idle_cpus is useless. 3. enhance the process of create_power_saving_task/destroy_power_saving_task 4. Add more error checks when evaluating _PUR object. 5. one typo fix Signed-off-by: Chen Gong <gong.chen@linux.intel.com> Acked-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
|
f67538f81e6b8da9175c82807d649fbdb0055844 |
|
14-Nov-2009 |
Andrew Morton <akpm@linux-foundation.org> |
acpi_pad: squish warning drivers/acpi/acpi_pad.c: In function 'power_saving_thread': drivers/acpi/acpi_pad.c:103: warning: 'preferred_cpu' may be used uninitialized in this function Cc: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Len Brown <len.brown@intel.com>
|
8e0af5141ab950b78b3ebbfaded5439dcf8b3a8d |
|
28-Jul-2009 |
Shaohua Li <shaohua.li@intel.com> |
ACPI: create Processor Aggregator Device driver ACPI 4.0 created the logical "processor aggregator device" as a mechinism for platforms to ask the OS to force otherwise busy processors to enter (power saving) idle. The intent is to lower power consumption to ride-out transient electrical and thermal emergencies, rather than powering off the server. On platforms that can save more power/performance via P-states, the platform will first exhaust P-states before forcing idle. However, the relative benefit of P-states vs. idle states is platform dependent, and thus this driver need not know or care about it. This driver does not use the kernel's CPU hot-plug mechanism because after the transient emergency is over, the system must be returned to its normal state, and hotplug would permanently break both cpusets and binding. So to force idle, the driver creates a power saving thread. The scheduler will migrate the thread to the preferred CPU. The thread has max priority and has SCHED_RR policy, so it can occupy one CPU. To save power, the thread will invoke the deep C-state entry instructions. To avoid starvation, the thread will sleep 5% of the time time for every second (current RT scheduler has threshold to avoid starvation, but if other CPUs are idle, the CPU can borrow CPU timer from other, which makes the mechanism not work here) Vaidyanathan Srinivasan has proposed scheduler enhancements to allow injecting idle time into the system. This driver doesn't depend on those enhancements, but could cut over to them when they are available. Peter Z. does not favor upstreaming this driver until the those scheduler enhancements are in place. However, we favor upstreaming this driver now because it is useful now, and can be enhanced over time. Signed-off-by: Shaohua Li <shaohua.li@intel.com> NACKed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Signed-off-by: Len Brown <len.brown@intel.com>
|