| f6c6fda4c9e17940b0a2ba206b0408babfdc930c |
|
27-Nov-2014 |
Thomas Graf <tgraf@suug.ch> |
bond: Check length of IFLA_BOND_ARP_IP_TARGET attributes
Fixes: 7f28fa10 ("bonding: add arp_ip_target netlink support")
Reported-by: John Fastabend <john.fastabend@gmail.com>
Cc: Scott Feldman <sfeldma@cumulusnetworks.com>
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Acked-by: John Fastabend <john.r.fastabend@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| 059b47e8aaf997245bc531e980581de492315fe6 |
|
09-Sep-2014 |
Nikolay Aleksandrov <nikolay@redhat.com> |
bonding: convert primary_slave to use RCU
This is necessary mainly for two bonding call sites: procfs and
sysfs as it was dereferenced without any real protection.
Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| cea6aeb6979f6409cacd6900d237cb4ed39fd6d2 |
|
05-Sep-2014 |
Jiri Pirko <jiri@resnulli.us> |
bonding: add slave netlink policy and put slave-related ops together
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Acked-by: Nikolay Aleksandrov <nikolay@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| 0f23124aaacd68e11271f72a13f3a8e8904c26d3 |
|
27-Aug-2014 |
Nikolay Aleksandrov <nikolay@redhat.com> |
bonding: add slave_changelink support and use it for queue_id
This patch adds support for slave_changelink to the bonding and uses it
to give the ability to change the queue_id of the enslaved devices via
netlink. It sets slave_maxtype and uses bond_changelink as a prototype for
bond_slave_changelink.
Example/test command after the iproute2 patch:
ip link set eth0 type bond_slave queue_id 10
CC: David S. Miller <davem@davemloft.net>
CC: Jay Vosburgh <j.vosburgh@gmail.com>
CC: Veaceslav Falico <vfalico@gmail.com>
CC: Andy Gospodarek <andy@greyhouse.net>
Suggested-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| 6a9fc6f14a3c183a1a9df6d4a5e6ecb11beafb82 |
|
15-Jul-2014 |
Veaceslav Falico <vfalico@gmail.com> |
bonding: bonding: remove pr_fmt from bond_netlink.c
To maintain the same message structure as netdev_* functions print.
CC: Jay Vosburgh <j.vosburgh@gmail.com>
CC: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Veaceslav Falico <vfalico@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| a5f24542ab61f4dc3d07fb4ae7d8903c3040449a |
|
15-Jul-2014 |
Veaceslav Falico <vfalico@gmail.com> |
bonding: convert bond_netlink.c to use netdev_printk instead of pr_
CC: Jay Vosburgh <j.vosburgh@gmail.com>
CC: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Veaceslav Falico <vfalico@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| e965f8049460569bab12fe7bb5381bb2279712e2 |
|
15-Jul-2014 |
Eric Dumazet <edumazet@google.com> |
bonding: get rid of bond_option_active_slave_get()
Only keep bond_option_active_slave_get_rcu() helper.
bond_fill_info() uses a new bond_option_active_slave_get_ifindex()
helper.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Veaceslav Falico <vfalico@gmail.com>
Reviewed-by: Nikolay Aleksandrov <nikolay@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| 01844098ecd9564cd5f903e3ff6c1ea96355772d |
|
15-May-2014 |
Veaceslav Falico <vfalico@gmail.com> |
bonding: create a macro for bond mode and use it
CC: Jay Vosburgh <j.vosburgh@gmail.com>
CC: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Veaceslav Falico <vfalico@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| 3fdddd859af235119bdfb09ccc886fe48b97fc72 |
|
12-May-2014 |
dingtianhong <dingtianhong@huawei.com> |
bonding: alloc the structure ad_info dynamically in per slave
The struct ad_slave_info is very huge, and only be used for 802.3ad mode,
so alloc the structure dynamically could save 356 Bits for every slave in
non 802.3ad mode.
Cc: Jay Vosburgh <j.vosburgh@gmail.com>
Cc: Veaceslav Falico <vfalico@gmail.com>
Cc: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Ding Tianhong <dingtianhong@huawei.com>
Acked-by: Veaceslav Falico <vfalico@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| a19a7ec8fc8eb32113efeaff2a1ceca273726e9b |
|
10-Mar-2014 |
stephen hemminger <stephen@networkplumber.org> |
bonding: force cast of IP address in options
The option code is taking IP address and putting it into a generic
container. Force cast to silence sparse warnings.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| 90194264ceffdff809e625f54767f6f8c292a28e |
|
16-Feb-2014 |
Joe Perches <joe@perches.com> |
bonding: Neaten pr_<level>
Add missing terminating newlines.
Convert uses of pr_info to pr_cont in bond_check_params.
Standardize upper/lower case styles.
Typo fixes, remove unnecessary parentheses and periods.
Alignment neatening.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| 3bad540ed8285fb53f6365420bba0320d8cd2066 |
|
22-Jan-2014 |
Jiri Pirko <jiri@resnulli.us> |
bonding: convert netlink to use slave data info api
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| df7dbcbbafc0b8f3fb31a40c6f3c4a7e15cb0b40 |
|
22-Jan-2014 |
Jiri Pirko <jiri@resnulli.us> |
rtnetlink: put "BOND" into nl attribute names which are related to bonding
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| 4325b374f84e59226851636df946f2500d0bfeba |
|
22-Jan-2014 |
Nikolay Aleksandrov <nikolay@redhat.com> |
bonding: convert lp_interval to use the new option API
This patch adds the necessary changes so lp_interval would use
the new bonding option API.
Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| 105c8fb6c55e9c5055798184cbb5ef61343139b4 |
|
22-Jan-2014 |
Nikolay Aleksandrov <nikolay@redhat.com> |
bonding: convert resend_igmp to use the new option API
This patch adds the necessary changes so resend_igmp would use
the new bonding option API.
Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| 3df011625135fa1c670cb8e24618fc7ca38e00b0 |
|
22-Jan-2014 |
Nikolay Aleksandrov <nikolay@redhat.com> |
bonding: convert all_slaves_active to use the new option API
This patch adds the necessary changes so all_slaves_active would use
the new bonding option API.
Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| d1fbd3ed9366904b58b1c0c30b22d51dc793de99 |
|
22-Jan-2014 |
Nikolay Aleksandrov <nikolay@redhat.com> |
bonding: convert active_slave to use the new option API
This patch adds the necessary changes so active_slave would use
the new bonding option API. Also some trivial/style fixes.
Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| 0fff060877426f3faf6754c201e28cd5b34756c0 |
|
22-Jan-2014 |
Nikolay Aleksandrov <nikolay@redhat.com> |
bonding: convert use_carrier to use the new option API
This patch adds the necessary changes so use_carrier would use
the new bonding option API.
Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| 388d3a6d4aa356b885bcd023c185060df9ea2484 |
|
22-Jan-2014 |
Nikolay Aleksandrov <nikolay@redhat.com> |
bonding: convert primary_reselect to use the new option API
This patch adds the necessary changes so primary_reselect would use
the new bonding option API.
Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| 180222f08861d8206b3ff1c6392101e29d4ae161 |
|
22-Jan-2014 |
Nikolay Aleksandrov <nikolay@redhat.com> |
bonding: convert primary to use the new option API
This patch adds the necessary changes so primary would use
the new bonding option API.
Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| b98d9c66e1c3823c50a3cd5e8e59f12b97d7ba5d |
|
22-Jan-2014 |
Nikolay Aleksandrov <nikolay@redhat.com> |
bonding: convert miimon to use the new option API
This patch adds the necessary changes so miimon would use
the new bonding option API. The "default" definition has been removed as
it was 0.
Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| ef56becbb37251f0371ad94210f50dc90e18830a |
|
22-Jan-2014 |
Nikolay Aleksandrov <nikolay@redhat.com> |
bonding: convert num_peer_notif to use the new option API
This patch adds the necessary changes so num_peer_notif would use
the new bonding option API.
When the auto-sysfs generation is done an alias should be added for
this option as there're currently 2 entries in sysfs for it.
Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| 9e5f5eebe765b340af0318dba261e5de0f2aaf32 |
|
22-Jan-2014 |
Nikolay Aleksandrov <nikolay@redhat.com> |
bonding: convert ad_select to use the new option API
This patch adds the necessary changes so ad_select would use
the new bonding option API.
Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| 633ddc9e9bafd168861dee1000b2c6ff725e85c5 |
|
22-Jan-2014 |
Nikolay Aleksandrov <nikolay@redhat.com> |
bonding: convert min_links to use the new option API
This patch adds the necessary changes so min_links would use
the new bonding option API.
Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| d3131de76b1b1a4d95f145846bd61f96e72f0411 |
|
22-Jan-2014 |
Nikolay Aleksandrov <nikolay@redhat.com> |
bonding: convert lacp_rate to use the new option API
This patch adds the necessary changes so lacp_rate would use
the new bonding option API. Also some trivial/style error fixes.
Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| e499461275023e20c4aecb6a546e7e213631b99f |
|
22-Jan-2014 |
Nikolay Aleksandrov <nikolay@redhat.com> |
bonding: convert updelay to use the new option API
This patch adds the necessary changes so updelay would use
the new bonding option API. Also some trivial style fixes.
Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| 25a9b54a4b4a996e5a996c1e841c265d40db1d40 |
|
22-Jan-2014 |
Nikolay Aleksandrov <nikolay@redhat.com> |
bonding: convert downdelay to use the new option API
This patch adds the necessary changes so downdelay would use
the new bonding option API. Also some trivial style fixes.
Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| 4fb0ef585eb2825ef4e542c2b1d302dc53f36860 |
|
22-Jan-2014 |
Nikolay Aleksandrov <nikolay@redhat.com> |
bonding: convert arp_ip_target to use the new option API
This patch adds the necessary changes so arp_ip_target would use
the new bonding option API. This option is an exception because of
the way it's currently implemented that's why its netlink code is
a bit different from the other options to keep the functionality as
before and at the same time to have a single set function.
This patch also fixes a few stylistic errors.
Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| 7bdb04ed0dbf9f0e94110be43db4f8bb7df58de2 |
|
22-Jan-2014 |
Nikolay Aleksandrov <nikolay@redhat.com> |
bonding: convert arp_interval to use the new option API
This patch adds the necessary changes so arp_interval would use
the new bonding option API. The "default" definition has been removed as
it was 0.
Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| 1df6b6aa334c99b39f9366f4199b7f5e479a8899 |
|
22-Jan-2014 |
Nikolay Aleksandrov <nikolay@redhat.com> |
bonding: convert fail_over_mac to use the new option API
This patch adds the necessary changes so fail_over_mac would use
the new bonding option API. Also fixes a trivial copy/paste error in
bond_check_params where the wrong variable was used for the error msg.
Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| edf36b24c58dbbd5f2e708096537bf0a88ffa477 |
|
22-Jan-2014 |
Nikolay Aleksandrov <nikolay@redhat.com> |
bonding: convert arp_all_targets to use the new option API
This patch adds the necessary changes so arp_all_targets would use the
new bonding option API.
Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| 162288810c9ebd2efb79ee6dc364e266044cac9e |
|
22-Jan-2014 |
Nikolay Aleksandrov <nikolay@redhat.com> |
bonding: convert arp_validate to use the new option API
This patch adds the necessary changes so arp_validate would use the
new bonding option API. Also fix some trivial/style errors.
Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| a4b32ce7f891d507aa663bc78118ef267f0d6d4c |
|
22-Jan-2014 |
Nikolay Aleksandrov <nikolay@redhat.com> |
bonding: convert xmit_hash_policy to use the new option API
This patch adds the necessary changes so xmit_hash_policy would use the
new bonding option API. Also fix some trivial/style errors.
Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| aa59d8517d1017e571b803ba6302c4b693b324ab |
|
22-Jan-2014 |
Nikolay Aleksandrov <nikolay@redhat.com> |
bonding: convert packets_per_slave to use the new option API
This patch adds the necessary changes so packets_per_slave would use the
new bonding option API.
Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| 2b3798d5e1377ce6c67993bb271754c9c5ab4833 |
|
22-Jan-2014 |
Nikolay Aleksandrov <nikolay@redhat.com> |
bonding: convert mode setting to use the new option API
This patch makes the bond's mode setting use the new option API and
adds support for dependency printing which relies on having an entry for
the mode option in the bond_opts[] array.
Also add the ability to print the mode name when mode dependency fails
and fix some trivial/style errors.
Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| 809fa972fd90ff27225294b17a027e908b2d7b7a |
|
22-Jan-2014 |
Hannes Frederic Sowa <hannes@stressinduktion.org> |
reciprocal_divide: update/correction of the algorithm
Jakub Zawadzki noticed that some divisions by reciprocal_divide()
were not correct [1][2], which he could also show with BPF code
after divisions are transformed into reciprocal_value() for runtime
invariance which can be passed to reciprocal_divide() later on;
reverse in BPF dump ended up with a different, off-by-one K in
some situations.
This has been fixed by Eric Dumazet in commit aee636c4809fa5
("bpf: do not use reciprocal divide"). This follow-up patch
improves reciprocal_value() and reciprocal_divide() to work in
all cases by using Granlund and Montgomery method, so that also
future use is safe and without any non-obvious side-effects.
Known problems with the old implementation were that division by 1
always returned 0 and some off-by-ones when the dividend and divisor
where very large. This seemed to not be problematic with its
current users, as far as we can tell. Eric Dumazet checked for
the slab usage, we cannot surely say so in the case of flex_array.
Still, in order to fix that, we propose an extension from the
original implementation from commit 6a2d7a955d8d resp. [3][4],
by using the algorithm proposed in "Division by Invariant Integers
Using Multiplication" [5], Torbjörn Granlund and Peter L.
Montgomery, that is, pseudocode for q = n/d where q, n, d is in
u32 universe:
1) Initialization:
int l = ceil(log_2 d)
uword m' = floor((1<<32)*((1<<l)-d)/d)+1
int sh_1 = min(l,1)
int sh_2 = max(l-1,0)
2) For q = n/d, all uword:
uword t = (n*m')>>32
q = (t+((n-t)>>sh_1))>>sh_2
The assembler implementation from Agner Fog [6] also helped a lot
while implementing. We have tested the implementation on x86_64,
ppc64, i686, s390x; on x86_64/haswell we're still half the latency
compared to normal divide.
Joint work with Daniel Borkmann.
[1] http://www.wireshark.org/~darkjames/reciprocal-buggy.c
[2] http://www.wireshark.org/~darkjames/set-and-dump-filter-k-bug.c
[3] https://gmplib.org/~tege/division-paper.pdf
[4] http://homepage.cs.uiowa.edu/~jones/bcd/divide.html
[5] http://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.1.2556
[6] http://www.agner.org/optimize/asmlib.zip
Reported-by: Jakub Zawadzki <darkjames-ws@darkjames.pl>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Austin S Hemmelgarn <ahferroin7@gmail.com>
Cc: linux-kernel@vger.kernel.org
Cc: Jesse Gross <jesse@nicira.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Andy Gospodarek <andy@greyhouse.net>
Cc: Veaceslav Falico <vfalico@redhat.com>
Cc: Jay Vosburgh <fubar@us.ibm.com>
Cc: Jakub Zawadzki <darkjames-ws@darkjames.pl>
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| 1d3ee88ae0d605629bf369ab0b868dae8ca62a48 |
|
17-Jan-2014 |
sfeldma@cumulusnetworks.com <sfeldma@cumulusnetworks.com> |
bonding: add netlink attributes to slave link dev
If link is IFF_SLAVE, extend link dev netlink attributes to include
slave attributes with new IFLA_SLAVE nest. Add netlink notification
(RTM_NEWLINK) when slave status changes from backup to active, or
visa-versa.
Adds new ndo_get_slave op to net_device_ops to fill skb with IFLA_SLAVE
attributes. Currently only used by bonding driver, but could be
used by other aggregating devices with slaves.
Signed-off-by: Scott Feldman <sfeldma@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| 288db0aafe8af0bf20674763196e3c272f22da88 |
|
03-Jan-2014 |
sfeldma@cumulusnetworks.com <sfeldma@cumulusnetworks.com> |
bonding: fix netlink msg size
Add missing space for IFLA_BOND_ARP_IP_TARGET nest header.
Signed-off-by: Scott Feldman <sfeldma@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| 4ee7ac7526d4a9413cafa733d824edfe49fdcc46 |
|
03-Jan-2014 |
sfeldma@cumulusnetworks.com <sfeldma@cumulusnetworks.com> |
bonding: add ad_info attribute netlink support
Add nested IFLA_BOND_AD_INFO for bonding 802.3ad info.
Signed-off-by: Scott Feldman <sfeldma@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| ec029fac3e96980fa8f6f81b8327787a9600dfaa |
|
03-Jan-2014 |
sfeldma@cumulusnetworks.com <sfeldma@cumulusnetworks.com> |
bonding: add ad_select attribute netlink support
Add IFLA_BOND_AD_SELECT to allow get/set of bonding parameter
ad_select via netlink.
Signed-off-by: Scott Feldman <sfeldma@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| 998e40bbf8f0e10b5d84107afc61e29dbc8d2de4 |
|
03-Jan-2014 |
sfeldma@cumulusnetworks.com <sfeldma@cumulusnetworks.com> |
bonding: add lacp_rate attribute netlink support
Add IFLA_BOND_AD_LACP_RATE to allow get/set of bonding parameter
lacp_rate via netlink.
Signed-off-by: Scott Feldman <sfeldma@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| c13ab3ff176eab78b6ee93817484584af5807cf2 |
|
18-Dec-2013 |
sfeldma@cumulusnetworks.com <sfeldma@cumulusnetworks.com> |
bonding: add packets_per_slave attribute netlink support
Add IFLA_BOND_PACKETS_PER_SLAVE to allow get/set of bonding parameter
packets_per_slave via netlink.
Signed-off-by: Scott Feldman <sfeldma@cumulusnetworks.com>
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| 8d836d092ed7b77d13ac1108399165ee7de7463f |
|
18-Dec-2013 |
sfeldma@cumulusnetworks.com <sfeldma@cumulusnetworks.com> |
bonding: add lp_interval attribute netlink support
Add IFLA_BOND_LP_INTERVAL to allow get/set of bonding parameter
lp_interval via netlink.
Signed-off-by: Scott Feldman <sfeldma@cumulusnetworks.com>
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| 7d1010082785b2020b1e2e1211b76209976a33df |
|
18-Dec-2013 |
sfeldma@cumulusnetworks.com <sfeldma@cumulusnetworks.com> |
bonding: add min_links attribute netlink support
Add IFLA_BOND_MIN_LINKS to allow get/set of bonding parameter
min_links via netlink.
Signed-off-by: Scott Feldman <sfeldma@cumulusnetworks.com>
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| 1cc0b1e30c662d84a89690f42826cf49e2278b97 |
|
18-Dec-2013 |
sfeldma@cumulusnetworks.com <sfeldma@cumulusnetworks.com> |
bonding: add all_slaves_active attribute netlink support
Add IFLA_BOND_ALL_SLAVES_ACTIVE to allow get/set of bonding parameter
all_slaves_active via netlink.
Signed-off-by: Scott Feldman <sfeldma@cumulusnetworks.com>
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| 2c9839c143bbc8c6612f56351dae8d57111aee37 |
|
18-Dec-2013 |
sfeldma@cumulusnetworks.com <sfeldma@cumulusnetworks.com> |
bonding: add num_grat_arp attribute netlink support
Add IFLA_BOND_NUM_PEER_NOTIF to allow get/set of bonding parameter
num_grat_arp via netlink. Bonding parameter num_unsol_na is
synonymous with num_grat_arp, so add only one netlink attribute
to represent both bonding parameters.
Signed-off-by: Scott Feldman <sfeldma@cumulusnetworks.com>
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| d8838de70adc64e20db531333e035aacd5910fca |
|
16-Dec-2013 |
sfeldma@cumulusnetworks.com <sfeldma@cumulusnetworks.com> |
bonding: add resend_igmp attribute netlink support
Add IFLA_BOND_RESEND_IGMP to allow get/set of bonding parameter
resend_igmp via netlink.
Signed-off-by: Scott Feldman <sfeldma@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| f70161c67231f54f784529d7447ce4386d258b7a |
|
16-Dec-2013 |
sfeldma@cumulusnetworks.com <sfeldma@cumulusnetworks.com> |
bonding: add xmit_hash_policy attribute netlink support
Add IFLA_BOND_XMIT_HASH_POLICY to allow get/set of bonding parameter
xmit_hash_policy via netlink.
Signed-off-by: Scott Feldman <sfeldma@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| 89901972de4c00e74e56529804493734d77ee3d3 |
|
16-Dec-2013 |
sfeldma@cumulusnetworks.com <sfeldma@cumulusnetworks.com> |
bonding: add fail_over_mac attribute netlink support
Add IFLA_BOND_FAIL_OVER_MAC to allow get/set of bonding parameter
fail_over_mac via netlink.
Signed-off-by: Scott Feldman <sfeldma@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| 8a41ae4496e534a8b68d9bc3c79113e16d1fcd4c |
|
16-Dec-2013 |
sfeldma@cumulusnetworks.com <sfeldma@cumulusnetworks.com> |
bonding: add primary_select attribute netlink support
Add IFLA_BOND_PRIMARY_SELECT to allow get/set of bonding parameter
primary_select via netlink.
Signed-off-by: Scott Feldman <sfeldma@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| 0a98a0d12c40f9354b942325045cae123d594341 |
|
16-Dec-2013 |
sfeldma@cumulusnetworks.com <sfeldma@cumulusnetworks.com> |
bonding: add primary attribute netlink support
Add IFLA_BOND_PRIMARY to allow get/set of bonding parameter
primary via netlink.
Signed-off-by: Scott Feldman <sfeldma@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| e7ef941d3e2ea92d564a0bb9b35b1f392b3a171e |
|
14-Dec-2013 |
Jiri Pirko <jiri@resnulli.us> |
bondnl: use be32 nla put/get for be32 values
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| d5c842544342fc3f13774ffc5581d4dd3975059b |
|
12-Dec-2013 |
sfeldma@cumulusnetworks.com <sfeldma@cumulusnetworks.com> |
bonding: add arp_all_targets netlink support
Add IFLA_BOND_ARP_ALL_TARGETS to allow get/set of bonding parameter
arp_all_targets via netlink.
Signed-off-by: Scott Feldman <sfeldma@cumulusnetworks.com>
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| 29c4948293bfc426e52a921f4259eb3676961e81 |
|
12-Dec-2013 |
sfeldma@cumulusnetworks.com <sfeldma@cumulusnetworks.com> |
bonding: add arp_validate netlink support
Add IFLA_BOND_ARP_VALIDATE to allow get/set of bonding parameter
arp_validate via netlink.
Signed-off-by: Scott Feldman <sfeldma@cumulusnetworks.com>
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| 7f28fa10e21376a10d3b9faad5836869465cc376 |
|
12-Dec-2013 |
sfeldma@cumulusnetworks.com <sfeldma@cumulusnetworks.com> |
bonding: add arp_ip_target netlink support
Add IFLA_BOND_ARP_IP_TARGET to allow get/set of bonding parameter
arp_ip_target via netlink.
Signed-off-by: Scott Feldman <sfeldma@cumulusnetworks.com>
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| 06151dbcf3f76edbe900138cde9e862f429918c9 |
|
12-Dec-2013 |
sfeldma@cumulusnetworks.com <sfeldma@cumulusnetworks.com> |
bonding: add arp_interval netlink support
Add IFLA_BOND_ARP_INTERVAL to allow get/set of bonding parameter
arp_interval via netlink.
Signed-off-by: Scott Feldman <sfeldma@cumulusnetworks.com>
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| 9f53e14e86c46a2300f17309f6308ad0dfbb53ff |
|
12-Dec-2013 |
sfeldma@cumulusnetworks.com <sfeldma@cumulusnetworks.com> |
bonding: add use_carrier netlink support
Add IFLA_BOND_USE_CARRIER to allow get/set of bonding parameter
use_carrier via netlink.
Signed-off-by: Scott Feldman <sfeldma@cumulusnetworks.com>
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| c7461f9bf5a11bf88fdbd05b26c6d55b77dcd46d |
|
12-Dec-2013 |
sfeldma@cumulusnetworks.com <sfeldma@cumulusnetworks.com> |
bonding: add downdelay netlink support
Add IFLA_BOND_DOWNDELAY to allow get/set of bonding parameter
downdelay via netlink.
Signed-off-by: Scott Feldman <sfeldma@cumulusnetworks.com>
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| 25852e29dfc58d249ad0db235996b36c33db6d61 |
|
12-Dec-2013 |
sfeldma@cumulusnetworks.com <sfeldma@cumulusnetworks.com> |
bonding: add updelay netlink support
Add IFLA_BOND_UPDELAY to allow get/set of bonding parameter
updelay via netlink.
Signed-off-by: Scott Feldman <sfeldma@cumulusnetworks.com>
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| eecdaa6e20284efbe9e76eebd44eac2b22f7b5d7 |
|
12-Dec-2013 |
sfeldma@cumulusnetworks.com <sfeldma@cumulusnetworks.com> |
bonding: add miimon netlink support
Add IFLA_BOND_MIIMON to allow get/set of bonding parameter
miimon via netlink.
Signed-off-by: Scott Feldman <sfeldma@cumulusnetworks.com>
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| e139862eeec985d7139b11b09deeb9a32e3f3af2 |
|
01-Nov-2013 |
Dan Carpenter <dan.carpenter@oracle.com> |
bonding: bond_get_size() returns wrong size
There is an extra semi-colon so bond_get_size() doesn't return the
correct value.
Fixes: ec76aa49855f ('bonding: add Netlink support active_slave option')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Veaceslav Falico <vfalico@redhat.com>
Reviewed-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| a729e83ad6f6de2cf11c0da4a5a7c0b3924d8335 |
|
20-Oct-2013 |
David S. Miller <davem@davemloft.net> |
bonding: Remove __exit tag from bond_netlink_fini().
It can be called from the module init function, so it cannot
be in the exit section.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| ec76aa49855f6d6fea5e01de179fb57dd47c619d |
|
18-Oct-2013 |
Jiri Pirko <jiri@resnulli.us> |
bonding: add Netlink support active_slave option
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| 90af231106c0b8d223c27d35464af95cb3d9cacf |
|
18-Oct-2013 |
Jiri Pirko <jiri@resnulli.us> |
bonding: add Netlink support mode option
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| 0a2a78c4a95240e658272bd7cd7422a529e4eb4a |
|
18-Oct-2013 |
Jiri Pirko <jiri@resnulli.us> |
bonding: push Netlink bits into separate file
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
|