862755ec07572036b0c69d738b88f89b6beede99 |
|
19-Jul-2014 |
H Hartley Sweeten <hsweeten@visionengravers.com> |
staging: comedi: drivers: remove unnecessary *_SIZE defines Some of the legacy comedi drivers have a *_SIZE define that is only passed to comedi_request_region() to specify the size of the region. Some of the pnp drivers (pci, etc.) also have a *_SIZE define which is unused. For aesthetics, remove these defines. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
a207c12f62e8b53e1e1600ca384b13a39a9feed2 |
|
19-Jul-2014 |
H Hartley Sweeten <hsweeten@visionengravers.com> |
staging: comedi: drivers: cleanup cmd->flags use Most of the comedi drivers that support async commands have some sort of timer to control the acquisition timing. For these drivers, Step 4 of the (*do_cmdtest) operations calls a ns_to_timer() function that converts the desired ns time of the command into a value used to set the timer. These ns_to_timer() functions also typically pass the cmd->flags in order to determine the desired rounding mode. Some of the drivers mask the cmd->flags with TRIG_ROUND_MASK when calling the ns_to_timer() functions. Move all the masking into the ns_to_timer() functions and just pass the cmd->flags directly. The cmd->flags member is an unsigned int, change the parameter type in the the ns_to_timer() functions to match. For aesthetics, rename the parameter in all the ns_to_timer() functions to 'flags'. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
dffe87cd683b51bda103255a163bbeb5e46f9e36 |
|
17-Jul-2014 |
H Hartley Sweeten <hsweeten@visionengravers.com> |
staging: comedi: dt2814: remove use of comedi_error() The comedi_error() function is just a wrapper around dev_err() that adds the dev->driver->driver_name prefix to the message and a terminating new-line character. The addition of the driver_name is just added noise and some of the users of comedi_error() add unnecessary additional new-line characters. Use dev_err() directly instead of comedi_error() to avoid any confusion and so that all the comedi generated kernel messages have the same format. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
704b0050f4be3e271e091ca05bc54186926a50bf |
|
27-May-2014 |
H Hartley Sweeten <hsweeten@visionengravers.com> |
staging: comedi: dt2814: use comedi_fc helpers to validate timer arg Use the comedi_fc helper cfc_check_trigger_arg_is() to validate the trigger argument when the source is TRIG_TIMER. All the arguments are unsigned int, change the local variable to an unsigned int and rename it for aesthetic reasons. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
82c7e864a0fe0a2eb381f678e34909595eac9be8 |
|
10-Feb-2014 |
H Hartley Sweeten <hsweeten@visionengravers.com> |
staging: comedi: dt2814: use comedi_timeout() Use comedi_timeout() to wait for the analog input end-of-conversion. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
89d483850f4c378ec15e4b1eafcbc2ae845fc67e |
|
05-Dec-2013 |
H Hartley Sweeten <hsweeten@visionengravers.com> |
staging: comedi: dt2814: use dev->read_subdev Use the dev->read_subdev that was setup in the device attach instead of accessing the dev->subdevices array directly. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
c5a9595b2368eee2a4a92ffe30a57f3a45e478bf |
|
27-Nov-2013 |
H Hartley Sweeten <hsweeten@visionengravers.com> |
staging: comedi: dt2814: tidy up the irq support in dt2814_attach() An irq is only needed by this driver in order to support async commands. Since it is optional, modify the attach so that if the request_irq() fails the attach does not fail. Remove the printk noise about the irq. Only hookup the async command support if the request_irq() was successful. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
323cd3559f2443c3d5be511ea298cfadade71c17 |
|
27-Nov-2013 |
H Hartley Sweeten <hsweeten@visionengravers.com> |
staging: comedi: dt2814: convert a printk(KERN_ERR into a dev_err() Convert this printk message into a dev_dev(). Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
1cb62c86ef1227edae33d4cd1b034d0cf257a9b8 |
|
27-Nov-2013 |
H Hartley Sweeten <hsweeten@visionengravers.com> |
staging: comedi: dt2814: remove bad printk noise This printk could spew a lot of noise while waiting for the ai conversion to complete. Just remove it. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
f0256161c234f2377f491b0b5e12b5d5f5d45892 |
|
27-Nov-2013 |
H Hartley Sweeten <hsweeten@visionengravers.com> |
staging: comedi: dt2814: remove unnecessary printk noise The ai read timeout will return -ETIMEDOUT. The printk is just added noise. Remove it. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
c9001543fbaf04787324dd1f63444c6507da2d60 |
|
26-Nov-2013 |
H Hartley Sweeten <hsweeten@visionengravers.com> |
staging: comedi: dt2814: remove disabled irq probe code The irq probe code in dt2814_attach() is disabled by an #if 0 block. Just remove it. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
8e6b7915a1da703617dca28c33e150141fcec9b0 |
|
25-Jun-2013 |
H Hartley Sweeten <hsweeten@visionengravers.com> |
staging: comedi: drivers do not need <linux/ioport.h> All the ioport resources are managed by the comedi core. None of the drivers depend on <linux/ioport.h>. Remove the includes. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
ce157f8032bbd46d9427034c335b0afd751da25d |
|
25-Jun-2013 |
H Hartley Sweeten <hsweeten@visionengravers.com> |
staging: comedi: don't rely on comedidev.h to include headers comedidev.h is the main kernel header for comedi. Every comedi driver includes this header which then includes a number of <linux/*> headers. All the drivers need <linux/module.h> and some of them need <linux/delay.h>. The rest are not needed by any of the drivers. Remove all the includes in comedidev.h except for <linux/dma-mapping.h>, which is needed to pick up the enum dma_data_direction for the comedi_subdevice definition, and "comedi.h", which is the uapi header for comedi. Add <linux/module.h> to all the comedi drivers and <linux/delay.h> to the couple that need it. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
0bdab509bf9c6d838dc0a3b1d68bbf841fc20b5a |
|
25-Jun-2013 |
H Hartley Sweeten <hsweeten@visionengravers.com> |
staging: comedi: use comedi_alloc_devpriv() Use the helper function to allocate memory and set the comedi_device private data pointer. This removes the dependency on slab.h from most of the drivers so remove the global #include in comedidev.h and the local #include in some of the drivers. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
641f064e5df6fb3aaeb6256031a153a5efb16ca6 |
|
25-Apr-2013 |
H Hartley Sweeten <hsweeten@visionengravers.com> |
staging: comedi: remove FSF address from boilerplate text Addresses change... Remove the paragraph with the FSF address from all the comedi source files. Also, remove the paragraph about the finding the complete GPL in the COPYING file since it's unnecessary. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
3d1fe3f785c80e17f62acf8f92570ae9210bd588 |
|
18-Apr-2013 |
H Hartley Sweeten <hsweeten@visionengravers.com> |
staging: comedi: drivers: free_irq() in comedi_legacy_detach() All the legacy comedi drivers now call comedi_legacy_detach() either directly or as part of their (*detach). Move the free_irq() into comedi_legacy_detach() so that the drivers don't have to deal with it. For drivers that then only call comedi_legacy_detach() in their private (*detach), remove the private function and use the helper directly for the (*detach). The amplc_pc236 and ni_labpc drivers are hybrid legacy/PCI drivers. In the detach of a PCI board free_irq() still needs to be handled by the driver. The pcl724 and pcl726 drivers currently have the free_irq() #ifdef'ed out. The comedi_legacy_detach() function sanity checks that the irq has been requested before freeing it so they are safe to convert. For aesthetic reasons, move the #ifdef unused chunk in the pcl816 driver up to the previous #ifdef unused block. The pcmio and pcmuio drivers request multiple irqs and handle the freeing of them. Remove the 'dev->irq = irq[0]' in those drivers so that comedi_legacy_detach() does not attempt to free the irq. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
a32c6d0084992d3e58a93120c9ce9527e80c651e |
|
18-Apr-2013 |
H Hartley Sweeten <hsweeten@visionengravers.com> |
staging: comedi: drivers: use comedi_legacy_detach() Use comedi_legacy_detach() to release the I/O region requested by these drivers. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
c5c18cd3661e57ef09b545570dac891c53b981e4 |
|
10-Apr-2013 |
H Hartley Sweeten <hsweeten@visionengravers.com> |
staging: comedi: dt2814: use comedi_request_region() Use comedi_request_region() to request the I/O region used by this driver. Remove the noise when the board is first attached as well as the error message when the request_region() fails, comedi_request_reqion() will output the error message if necessary. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
5993f3a2692eed3c74c86882155b8703a0060ad5 |
|
08-Apr-2013 |
H Hartley Sweeten <hsweeten@visionengravers.com> |
staging: comedi: remove unnecessary dev->board_name initialization The dev->board_name is now initialized by the comedi core before calling the(*attach) or (*auto_attach) function in a driver. As long as the driver does no additional probing, it's no longer necessary initialize the board_name. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
2345dc8b0c2d3759e91e300d8480c5788aea720d |
|
14-Nov-2012 |
H Hartley Sweeten <hartleys@visionengravers.com> |
staging: comedi: dt2814: use cfc_check_trigger_arg_*() helpers Use the new helpers in the step 3 tests of dt2814_ai_cmdtest(). Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
c34fa261b0ac3a862ccd3f71ee55a16b920dfc83 |
|
23-Oct-2012 |
H Hartley Sweeten <hartleys@visionengravers.com> |
staging: comedi: remove inline alloc_private() This inline function has a very generic name and it's only a wrapper around a simple kzalloc(). Since the inline function does not save any lines-of-code, instead of renaming it just remove it and do the kzalloc() directly. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
9a1a6cf8ae5ca58171e117335b9983e3cfa2185c |
|
15-Oct-2012 |
H Hartley Sweeten <hartleys@visionengravers.com> |
staging: comedi: drivers: remove remaining devpriv macros The remaining comedi drivers that still have a devpriv macro are all pretty straight forward for removing the devpriv macro. This macro relies on a local variable having a specific name. Remove its use by replacing it with a local variable where used. The inline function alloc_private(), used to kzalloc the dev->private memory, returns non-zero if there is an error. Fix all the alloc_private() calls accordingly and remove any kernel messages or obvious comments that still exist in the drivers. Leave a comment in the skel driver. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
27020ffed9166d65ce1e5b523051d13bfa2329b0 |
|
26-Sep-2012 |
H Hartley Sweeten <hartleys@visionengravers.com> |
staging: comedi: drivers: use comedi_fc.h cmdtest helpers Use the cfc_check_trigger_src() helper for Step 1 in all the driver cmdtest functions. Use the cfc_check_trigger_is_unique() helper for Step 2 in all the driver cmdtest functions. Note that single source triggers do not need to be checked, they are already unique if they pass Step 1. For aesthetic reasons, change the comments in the cmdtest functions for steps 1 and 2 so that they are all the same. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
92af10e1e210f1b9772d98715bb76950137423e2 |
|
06-Sep-2012 |
H Hartley Sweeten <hartleys@visionengravers.com> |
staging: comedi: dt2814: remove subdevice pointer math Convert the comedi_subdevice access from pointer math to array access. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
8b6c56949ffa83dbc2a6e8fa3f98b10a19372207 |
|
12-Jun-2012 |
H Hartley Sweeten <hartleys@visionengravers.com> |
staging: comedi: propogate error code from comedi_alloc_subdevices comedi_alloc_subdevices can fail with -EINVAL or -ENOMEM. When it does fail make sure to pass the proper error code back. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbott@mev.co.uk> Cc: Frank Mori Hess <fmhess@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
2f0b9d082e5d0056a3aca4be038483a564849196 |
|
12-Jun-2012 |
H Hartley Sweeten <hartleys@visionengravers.com> |
staging: comedi: export alloc_subdevices as comedi_alloc_subdevices Move the inline alloc_subdevices() function from comedidev.h to drivers.c and rename it to comedi_alloc_subdevices(). The function is large enough to warrant being an exported symbol rather than being an inline in every driver. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Cc: Frank Mori Hess <fmhess@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
484ecc95d9cdfa8b2f7029e2f3409cf078aed4ab |
|
18-May-2012 |
H Hartley Sweeten <hartleys@visionengravers.com> |
staging: comedi: cleanup all the comedi_driver 'detach' functions 1. Change the return type from int to void All the detach functions, except for the comedi usb drivers, simply return success (0). Plus, the return code is never checked in the comedi core. The comedi usb drivers do return error codes but the conditions can never happen. The first check is: if (!dev) return -EFAULT; This checks that the passed comedi_device pointer is valid. The detach function itself is called using this pointer so it MUST always be valid or there is a bug in the core: if (dev->driver) dev->driver->detach(dev); And the second check: usb = dev->private; if (!usb) return -EFAULT; The dev->private pointer is setup in the attach function to point to the probed usb device. This value could be NULL if the attach fails. But, since the comedi core is going to unload the driver anyway and does not check for errors there is no gain by returning one. After removing these checks from the comedi usb drivers the detach functions required a bit of cleanup. 2. Remove all the printk noise in the detach functions All of the printk output is really just noise. The user did a rmmod to unload the driver, we really don't need to tell them about it. Also, some of the messages are output using: dev_dbg(dev->hw_dev, ... or dev_info(dev->hw_dev, ... Unfortunately the hw_dev value is only used by drivers that are doing DMA. For most drivers this variable is going to be NULL so the output is not going to work as expected. 3. Refactor a couple static 'free_resource' functions into the detach functions. The 'free_resource' function is only being called by the detach and it makes more sense to just absorb the code. 4. Remove a couple unnecessary braces for single statements. 5. Remove unnecessary comments. Most of the comedi drivers appear to be based on the comedi skel driver and have the comments from that driver included. These comments make sense in the skel driver for reference but they don't need to be in any of the actual drivers. 6. Remove all the extra whitespace. It's not needed to make the functions any more readable. 7. Remove the now unused 'attached_successfully' variable in the cb_pcimdda driver. This variable was only used to conditionally output some driver noise during the detach. Since all the printk's have been removed this variable is no longer necessary. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Cc: Mori Hess <fmhess@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
7806012e97edf47e87eb42058878d8e574f7461f |
|
05-May-2012 |
H Hartley Sweeten <hartleys@visionengravers.com> |
staging: comedi: refactor dt2814 driver and use module_comedi_driver Move the struct comedi_driver to the end of the source and refactor the code to remove the forward declarations. Convert the driver to use the module_comedi_driver() macro which makes the code smaller and a bit simpler. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Cc: Mori Hess <fmhess@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
7114a28011f9d5f3d981731ad341177c21f9d948 |
|
06-Jun-2010 |
Arun Thomas <arun.thomas@gmail.com> |
Staging: comedi: Remove COMEDI_INITCLEANUP macro Move the init/exit routines to the respective C source files instead of calling COMEDI_INITCLEANUP Signed-off-by: Arun Thomas <arun.thomas@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
90f703d30dd3e0c16ff80f35e34e511385a05ad5 |
|
06-Jun-2010 |
Arun Thomas <arun.thomas@gmail.com> |
Staging: comedi: Remove COMEDI_MODULES_MACRO Add MODULE_AUTHOR, MODULE_LICENSE, and MODULE_DESCRIPTION calls to the respective C source files instead of calling COMEDI_MODULES_MACRO Signed-off-by: Arun Thomas <arun.thomas@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
3f3ba29c78c4039a9fd746065ff89afec8bbc19a |
|
10-Mar-2010 |
Felipe de Oliveira Tanus <fotanus@gmail.com> |
Staging: comedi: cleanup dt2814.c This patch cleans up the dt2814.c driver file from issues found by checkpatch.pl tool. Signed-off-by: Felipe de Oliveira Tanus <fotanus@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
828684f9a6e096f9150bad523c43b75d74b9badd |
|
29-Sep-2009 |
Dirk Hohndel <hohndel@infradead.org> |
Staging: comedi: trivial fix of a very frequent spelling mistake something-bility is spelled as something-blity so a grep for 'blit' would find these lines this is so trivial that I didn't split it by subsystem / copy additional maintainers - all changes are to comments The only purpose is to get fewer false positives when grepping around the kernel sources. Signed-off-by: Dirk Hohndel <hohndel@infradead.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
0a85b6f0ab0d2edb0d41b32697111ce0e4f43496 |
|
08-Jun-2009 |
Mithlesh Thukral <mithlesh@linsyssoft.com> |
Staging: Comedi: Lindent changes to comdi driver in staging tree Lindent changes to comdi driver in staging tree. This patch is followed by the checkpatch.pl error fixes. Did not make them part of this patch as the patch size is already huge. Signed-off-by: Mithlesh Thukral <mithlesh@linsyssoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
25436dc9d84f1be60ff549c9ab712bba2835f284 |
|
28-Apr-2009 |
Greg Kroah-Hartman <gregkh@suse.de> |
Staging: comedi: remove RT code This removes the unused RT code from the comedi subsystem. A lot of drivers needed to then include interrupt.h on their own, as they were picking it up through the comedi_rt.h inclusion. Cc: Ian Abbott <abbotti@mev.co.uk> Cc: Frank Mori Hess <fmhess@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
5f74ea14c07fee91d3bdbaad88bff6264c6200e6 |
|
27-Apr-2009 |
Greg Kroah-Hartman <gregkh@suse.de> |
Staging: comedi: remove comedi-specific wrappers There are a number of comedi "wrappers" for some RT functions that are about to go away. This patch removes all of the wrapper calls within the comedi drivers and core in order to prepare for removing the RT comedi code. Cc: Ian Abbott <abbotti@mev.co.uk> Cc: Frank Mori Hess <fmhess@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
68c3dbff9fc9f25872408d0e95980d41733d48d0 |
|
23-Apr-2009 |
Bill Pemberton <wfp5p@virginia.edu> |
Staging: comedi: fix the way structs are initialized. Change from the foo: bar format to the .foo = bar format. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
c3744138715045adb316284ee7a1e608f0278f6c |
|
23-Apr-2009 |
Bill Pemberton <wfp5p@virginia.edu> |
Staging: comedi: remove assignment in conditionals Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
da91b2692e0939b307f9047192d2b9fe07793e7a |
|
09-Apr-2009 |
Bill Pemberton <wfp5p@virginia.edu> |
Staging: comedi: fix "foo * bar" should be "foo *bar" Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
70265d24e3404fe798b6edd55a02016b1edb49d7 |
|
26-Mar-2009 |
Jiri Slaby <jirislaby@gmail.com> |
staging: comedi, remove interrupt.h Remove interrupt wraparound. Use defines from linux/interrupt.h instead. Change also parameter types of functions taking ISR to irq_handler_t. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: Ian Abbott <abbotti@mev.co.uk> Cc: Frank Mori Hess <fmhess@users.sourceforge.net> Cc: David Schleef <ds@schleef.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
ca6f10ca8630d709e0d291fb9601f8c8d81c19a0 |
|
17-Mar-2009 |
Bill Pemberton <wfp5p@virginia.edu> |
Staging: comedi: Remove dt2814_private typedef Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
0707bb04be89b18ee83b5a997e36cc585f0b988d |
|
17-Mar-2009 |
Bill Pemberton <wfp5p@virginia.edu> |
Staging: comedi: Remove comedi_devconfig typedef Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
90035c0886b256d75bced13b3b3cea5234aff136 |
|
17-Mar-2009 |
Bill Pemberton <wfp5p@virginia.edu> |
Staging: comedi: Remove comedi_insn typedef Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
ea6d0d4cab4f4f2d6a88f3bce4707fe92696fd3f |
|
17-Mar-2009 |
Bill Pemberton <wfp5p@virginia.edu> |
Staging: comedi: Remove comedi_cmd typedef Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
139dfbdfacb02e3ef3df936d2fabd1ad5f14ea88 |
|
17-Mar-2009 |
Bill Pemberton <wfp5p@virginia.edu> |
Staging: comedi: Remove comedi_driver typedef Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
34c43922e62708d45e9660eee4b4f1fb7b4bf2c7 |
|
17-Mar-2009 |
Bill Pemberton <wfp5p@virginia.edu> |
Staging: comedi: Remove comedi_subdevice typedef Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
71b5f4f11971dea972832ad63a994c7e5b45db6b |
|
17-Mar-2009 |
Bill Pemberton <wfp5p@virginia.edu> |
Staging: comedi: Remove comedi_device typedef Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
790c55415aa31f4c732729f94d2c3a54f7d3bfc2 |
|
17-Mar-2009 |
Bill Pemberton <wfp5p@virginia.edu> |
Staging: comedi: Remove lsampl_t and sampl_t typedefs Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
a211ea977a4127a88fe0a5c4846e33d0e8b2309f |
|
19-Feb-2009 |
David Schleef <ds@schleef.org> |
Staging: comedi: add dt2814 driver Driver for DataTranslation DT2814 From: David Schleef <ds@schleef.org> Cc: Ian Abbott <abbotti@mev.co.uk> Cc: Frank Mori Hess <fmhess@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|