| f01620914699679a26212affa358e5bbc5ede63e |
|
12-Aug-2014 |
H Hartley Sweeten <hsweeten@visionengravers.com> |
staging: comedi: 8255: provide common defines for registers
There are a couple comedi drivers that duplicate some of the register
defines used by the 8255 module. Move these defines into the header
so the duplication can be removed.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| 4085e93b9fecfad454159694c19efc36e7ac1cdf |
|
12-Aug-2014 |
H Hartley Sweeten <hsweeten@visionengravers.com> |
staging: comedi: 8255: refactor how the (*io) function works
Currently, all users of is module that use the default (*io) function
pass an 'iobase' to subdev_8255_init() of the form:
dev->iobase + OFFSET_TO_8255_BASE_REG
Now that the (*io) callback includes the comedi_device 'dev' pointer
the 'dev->iobase' does not need to be included.
Modify the default (*io) function, subdev_8255_io(), to automatically
add the dev->iobase to the address when reading/writing the port.
For aesthetics, rename the subdevice private data member to 'regbase'.
Also, rename the local variables in this module that are used to
access this member.
Add a comment in dev_8255_attach() about the 'iobase' that is passed
to subdev_8255_init(). For manually attached 8255 devices the io
region is requested with __comedi_request_region() which does not
set dev->iobase. For these devices the 'regbase' is actually the
'iobase'.
Remove the, now unnecessary, dev->iobase from all the callers of
subdev_8255_init(). There are a couple drivers that only passed the
dev->iobase. For those drivers pass a 'regbase' of 0x00.
Note that the das16m1 driver is a bit goofy. The devpriv->extra_iobase
is requested using __comedi_request_region() which does not set the
dev->iobase. But the starting address passed is dev->iobase + DAS16M1_82C55
so a 'regbase' of DAS16M1_82C55 is passed to subdev_8255_init().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| 862755ec07572036b0c69d738b88f89b6beede99 |
|
19-Jul-2014 |
H Hartley Sweeten <hsweeten@visionengravers.com> |
staging: comedi: drivers: remove unnecessary *_SIZE defines
Some of the legacy comedi drivers have a *_SIZE define that is only
passed to comedi_request_region() to specify the size of the region.
Some of the pnp drivers (pci, etc.) also have a *_SIZE define which
is unused.
For aesthetics, remove these defines.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| 75c04c2834eefe0ab4fb16051af62a399d633ebe |
|
19-Jul-2014 |
H Hartley Sweeten <hsweeten@visionengravers.com> |
staging: comedi: pcm3724: use default (*io) callback from 8255 module
The private (*io) callback used by this driver is identical to the
default one provided by the 8255 module. Use the default one instead.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| e6439a458aa2805f05dd5fb3da8a95fd90082728 |
|
03-Feb-2014 |
H Hartley Sweeten <hsweeten@visionengravers.com> |
staging: comedi: drivers: propogate errno from subdev_8255_init()
The initialization of the 8255 subdevice can fail due to the allocation
of the private data. Make sure all callers of subdev_8255_init() propogate
the errno.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| bab0e19c4d233f5705c4c9c0b5e4cd63936c344f |
|
27-Nov-2013 |
H Hartley Sweeten <hsweeten@visionengravers.com> |
staging: comedi: pcm3724: remove commented out printk debug
These messages are just added noise. Remove them.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| 5dacadcca3176e2b1f8db662e503c080484d71fa |
|
06-Aug-2013 |
H Hartley Sweeten <hsweeten@visionengravers.com> |
staging: comedi: drivers: use comedi_dio_insn_config() for complex cases
Convert the drivers with complex, port programmable i/o, to use the
comedi_dio_insn_config() helper function.
All of these drivers have some sort of 'port' programmable i/o where multiple
i/o channels are configured as a group. The 'mask' associated with the group
is passed to comedi_dio_insn_config() so that all the channels are configured.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| 3457bfd6dfb38f7bb66a227fe3473bad4773de06 |
|
13-Aug-2013 |
Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
Revert "staging: comedi: drivers: use comedi_dio_insn_config() for complex cases"
This reverts commit f21c53945cb95f66faa9636af5f23cb00ba73019.
I applied the wrong patch :(
Cc: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| f21c53945cb95f66faa9636af5f23cb00ba73019 |
|
06-Aug-2013 |
H Hartley Sweeten <hsweeten@visionengravers.com> |
staging: comedi: drivers: use comedi_dio_insn_config() for complex cases
Convert the drivers with complex, port programmable i/o, to use the
comedi_dio_insn_config() helper function.
All of these drivers have some sort of 'port' programmable i/o where multiple
i/o channels are configured as a group. The 'mask' associated with the group
is passed to comedi_dio_insn_config() so that all the channels are configured.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| d92fef8d2552ffde42b6092cb467f3021ebf8b98 |
|
25-Jun-2013 |
H Hartley Sweeten <hsweeten@visionengravers.com> |
staging: comedi: do not include <linux/delay.h> if its not needed
Some of the comedi files include this header but don't need it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| 8e6b7915a1da703617dca28c33e150141fcec9b0 |
|
25-Jun-2013 |
H Hartley Sweeten <hsweeten@visionengravers.com> |
staging: comedi: drivers do not need <linux/ioport.h>
All the ioport resources are managed by the comedi core. None of
the drivers depend on <linux/ioport.h>. Remove the includes.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| ce157f8032bbd46d9427034c335b0afd751da25d |
|
25-Jun-2013 |
H Hartley Sweeten <hsweeten@visionengravers.com> |
staging: comedi: don't rely on comedidev.h to include headers
comedidev.h is the main kernel header for comedi. Every comedi
driver includes this header which then includes a number of
<linux/*> headers. All the drivers need <linux/module.h> and some
of them need <linux/delay.h>. The rest are not needed by any of
the drivers.
Remove all the includes in comedidev.h except for <linux/dma-mapping.h>,
which is needed to pick up the enum dma_data_direction for the
comedi_subdevice definition, and "comedi.h", which is the uapi
header for comedi.
Add <linux/module.h> to all the comedi drivers and <linux/delay.h>
to the couple that need it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| 0bdab509bf9c6d838dc0a3b1d68bbf841fc20b5a |
|
25-Jun-2013 |
H Hartley Sweeten <hsweeten@visionengravers.com> |
staging: comedi: use comedi_alloc_devpriv()
Use the helper function to allocate memory and set the comedi_device
private data pointer.
This removes the dependency on slab.h from most of the drivers so
remove the global #include in comedidev.h and the local #include
in some of the drivers.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| 588ba6dc5fb4bdca47a3da38c2718fbb82d3eee1 |
|
11-Jun-2013 |
H Hartley Sweeten <hsweeten@visionengravers.com> |
staging: comedi: drivers: let core handle freeing s->private
Introduce a new subdevice runflags, SRF_FREE_SPRIV, and a new helper
function, comedi_set_spriv(), that the drivers can use to set the
comedi_subdevice private data pointer. The helper function will also
set SRF_FREE_SPRIV to allow the comedi core to automatically free the
subdevice private data during the cleanup_device() stage of the detach.
Currently s->private is only allocated by the 8255, addi_watchdog,
amplc_dio200_common, and ni_65xx drivers. All users of those drivers
can then have the comedi_spriv_free() calls removed and in many cases
the (*detach) can then simply be the appropriate comedi core provided
function.
The ni_65xx driver uses a helper function, ni_65xx_alloc_subdevice_private(),
to allocate the private data. Refactor the function to return an errno
or call comedi_set_spriv() instead of returning a pointer to the private
data and requiring the caller to handle it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| a32c6d0084992d3e58a93120c9ce9527e80c651e |
|
18-Apr-2013 |
H Hartley Sweeten <hsweeten@visionengravers.com> |
staging: comedi: drivers: use comedi_legacy_detach()
Use comedi_legacy_detach() to release the I/O region requested
by these drivers.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| 2f69915c728c3be41e12dbbbdd4eeb8d3388d58c |
|
16-Apr-2013 |
H Hartley Sweeten <hsweeten@visionengravers.com> |
staging: comedi: introduce, and use, comedi_spriv_free()
The comedi_subdevice 'private' variable is a void * that is available
for the subdevice to use in manner. It's common in comedi drivers for
the driver to allocate memory for a subdevice and store the pointer
to that memory in the 'private' variable. It's then the responsibility
of the driver to free that memory when the device is detached.
Due to how the attach/detach works in comedi, the drivers need to do
some sanity checking before they can free the allocated memory during
the detach.
Introduce a helper function, comedi_spriv_free(), to handle freeing
the private data allocated for a subdevice. This allows moving all the
sanity checks into the helper function and makes it safe to call
with any context. It also allows removing some of the boilerplate
code in the (*detach) functions.
Remove the subdev_8255_cleanup() export in the 8255 subdevice driver
as well as the addi_watchdog_cleanup() export in the addi_watchdog
driver and use the new helper instead.
The amplc_dio200_common driver uses a number of local helper functions
to free the private data for it's subdevices. Remove those as well and
use the new helper.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| 011c131f58836cab29f896f42fca7aa03739a95c |
|
10-Apr-2013 |
H Hartley Sweeten <hsweeten@visionengravers.com> |
staging: comedi: pcl3724: use comedi_request_region()
Use comedi_request_region() to request the I/O region used by this
driver.
Remove the noise when the board is first attached as well as the
error message when the request_region() fails, comedi_request_reqion()
will output the error message if necessary.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| 5993f3a2692eed3c74c86882155b8703a0060ad5 |
|
08-Apr-2013 |
H Hartley Sweeten <hsweeten@visionengravers.com> |
staging: comedi: remove unnecessary dev->board_name initialization
The dev->board_name is now initialized by the comedi core before calling
the(*attach) or (*auto_attach) function in a driver. As long as the driver
does no additional probing, it's no longer necessary initialize the board_name.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| c34fa261b0ac3a862ccd3f71ee55a16b920dfc83 |
|
23-Oct-2012 |
H Hartley Sweeten <hartleys@visionengravers.com> |
staging: comedi: remove inline alloc_private()
This inline function has a very generic name and it's only a
wrapper around a simple kzalloc(). Since the inline function
does not save any lines-of-code, instead of renaming it just
remove it and do the kzalloc() directly.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| 9a1a6cf8ae5ca58171e117335b9983e3cfa2185c |
|
15-Oct-2012 |
H Hartley Sweeten <hartleys@visionengravers.com> |
staging: comedi: drivers: remove remaining devpriv macros
The remaining comedi drivers that still have a devpriv macro
are all pretty straight forward for removing the devpriv
macro.
This macro relies on a local variable having a specific name.
Remove its use by replacing it with a local variable where
used.
The inline function alloc_private(), used to kzalloc the
dev->private memory, returns non-zero if there is an error.
Fix all the alloc_private() calls accordingly and remove any
kernel messages or obvious comments that still exist in the
drivers. Leave a comment in the skel driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| 5f1514bfd2ffa5e4333c037378a0b0d8db79ce23 |
|
08-Oct-2012 |
H Hartley Sweeten <hartleys@visionengravers.com> |
staging: comedi: pcm3724: remove boardinfo
This driver only supports a single "boardtype". Remove the unneeded
boardinfo struct and its use in the driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| 0a96639fe702a06ca428323a0cfcf7cabc26f6c7 |
|
06-Sep-2012 |
H Hartley Sweeten <hartleys@visionengravers.com> |
staging: comedi: pcm3724: remove subdevice pointer math
Convert the comedi_subdevice access from pointer math to array
access.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| 8b6c56949ffa83dbc2a6e8fa3f98b10a19372207 |
|
12-Jun-2012 |
H Hartley Sweeten <hartleys@visionengravers.com> |
staging: comedi: propogate error code from comedi_alloc_subdevices
comedi_alloc_subdevices can fail with -EINVAL or -ENOMEM. When it
does fail make sure to pass the proper error code back.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbott@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| 2f0b9d082e5d0056a3aca4be038483a564849196 |
|
12-Jun-2012 |
H Hartley Sweeten <hartleys@visionengravers.com> |
staging: comedi: export alloc_subdevices as comedi_alloc_subdevices
Move the inline alloc_subdevices() function from comedidev.h
to drivers.c and rename it to comedi_alloc_subdevices(). The
function is large enough to warrant being an exported symbol
rather than being an inline in every driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| 3cff0f1249f9be93c44ea071bafd9f28f673898d |
|
23-May-2012 |
H Hartley Sweeten <hartleys@visionengravers.com> |
staging: comedi: remove this_board macro in the pcm3724 driver
The 'this_board' macro depends on having a local variable with
a magic name. The CodingStyle document suggests not doing this
to avoid confusion. Remove the macro and use the comedi_board()
inline helper to get the dev->board_ptr information.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| 484ecc95d9cdfa8b2f7029e2f3409cf078aed4ab |
|
18-May-2012 |
H Hartley Sweeten <hartleys@visionengravers.com> |
staging: comedi: cleanup all the comedi_driver 'detach' functions
1. Change the return type from int to void
All the detach functions, except for the comedi usb drivers, simply
return success (0). Plus, the return code is never checked in the
comedi core.
The comedi usb drivers do return error codes but the conditions can
never happen.
The first check is:
if (!dev)
return -EFAULT;
This checks that the passed comedi_device pointer is valid. The detach
function itself is called using this pointer so it MUST always be valid
or there is a bug in the core:
if (dev->driver)
dev->driver->detach(dev);
And the second check:
usb = dev->private;
if (!usb)
return -EFAULT;
The dev->private pointer is setup in the attach function to point to the
probed usb device. This value could be NULL if the attach fails. But,
since the comedi core is going to unload the driver anyway and does not
check for errors there is no gain by returning one.
After removing these checks from the comedi usb drivers the detach
functions required a bit of cleanup.
2. Remove all the printk noise in the detach functions
All of the printk output is really just noise. The user did a rmmod to
unload the driver, we really don't need to tell them about it.
Also, some of the messages are output using:
dev_dbg(dev->hw_dev, ...
or
dev_info(dev->hw_dev, ...
Unfortunately the hw_dev value is only used by drivers that are doing
DMA. For most drivers this variable is going to be NULL so the output
is not going to work as expected.
3. Refactor a couple static 'free_resource' functions into the detach
functions.
The 'free_resource' function is only being called by the detach and it
makes more sense to just absorb the code.
4. Remove a couple unnecessary braces for single statements.
5. Remove unnecessary comments.
Most of the comedi drivers appear to be based on the comedi skel driver
and have the comments from that driver included. These comments make
sense in the skel driver for reference but they don't need to be in any
of the actual drivers.
6. Remove all the extra whitespace.
It's not needed to make the functions any more readable.
7. Remove the now unused 'attached_successfully' variable in the
cb_pcimdda driver.
This variable was only used to conditionally output some driver noise
during the detach. Since all the printk's have been removed this
variable is no longer necessary.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| 294f930d98be86fb4f34302c718a49719650857f |
|
04-May-2012 |
H Hartley Sweeten <hartleys@visionengravers.com> |
staging: comedi: use module_comedi_driver
Convert the refactored comedi drivers to use the module_comedi_driver()
macro which makes the code smaller and a bit simpler.
In the process, rename the driver variables from driver_* to *_driver,
as is more typical with other subsystems, and make sure they are all
static.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| 5f01bd51f1f079399f9a3c1951e1be86502f7bbc |
|
28-Apr-2012 |
H Hartley Sweeten <hartleys@visionengravers.com> |
staging: comedi: refactor pcm3724 driver to remove forward declarations
Move the module_init/module_exit routines and the associated
struct comedi_driver and other variables to the end of the source.
This is more typical of how other drivers are written and removes
the need for the forward declarations.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| 542038f4df5a9d5d806a4af8725d2d21c4423a15 |
|
20-Apr-2012 |
H Hartley Sweeten <hartleys@visionengravers.com> |
staging: comedi: use ARRAY_SIZE instead of custom n_boardtypes macros
The n_boardtypes macros are simply open-coded versions of the kernels
ARRAY_SIZE macro. Use the kernel provided macro.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| 273f4bef1847ef69f30d7e55f8de876a92639f17 |
|
10-Apr-2011 |
Joe Perches <joe@perches.com> |
staging: Remove unnecessary semicolons when for (foo) {...};
Done via perl script:
$ cat remove_semi_for.pl
my $match_balanced_parentheses = qr/(\((?:[^\(\)]++|(?-1))*\))/;
my $match_balanced_braces = qr/(\{(?:[^\{\}]++|(?-1))*\})/;
foreach my $file (@ARGV) {
my $f;
my $text;
my $oldtext;
next if ((-d $file));
open($f, '<', $file)
or die "$P: Can't open $file for read\n";
$oldtext = do { local($/) ; <$f> };
close($f);
next if ($oldtext eq "");
$text = $oldtext;
my $count = 0;
do {
$count = 0;
$count += $text =~ s@\b(for\s*${match_balanced_parentheses}\s*)${match_balanced_braces}\s*;@"$1$3"@egx;
} while ($count > 0);
if ($text ne $oldtext) {
my $newfile = $file;
open($f, '>', $newfile)
or die "$P: Can't open $newfile for write\n";
print $f $text;
close($f);
}
}
$
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
| 440a65475d9bf0997c28feb206a16ddd87122e22 |
|
29-Jun-2010 |
Kulikov Vasiliy <segooon@gmail.com> |
Staging: comedi: pcm3724: remove casts from void*
Remove unnesessary casts from void*.
Signed-off-by: Kulikov Vasiliy <segooon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
| 7114a28011f9d5f3d981731ad341177c21f9d948 |
|
06-Jun-2010 |
Arun Thomas <arun.thomas@gmail.com> |
Staging: comedi: Remove COMEDI_INITCLEANUP macro
Move the init/exit routines to the respective C source files
instead of calling COMEDI_INITCLEANUP
Signed-off-by: Arun Thomas <arun.thomas@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
| 90f703d30dd3e0c16ff80f35e34e511385a05ad5 |
|
06-Jun-2010 |
Arun Thomas <arun.thomas@gmail.com> |
Staging: comedi: Remove COMEDI_MODULES_MACRO
Add MODULE_AUTHOR, MODULE_LICENSE, and MODULE_DESCRIPTION calls
to the respective C source files instead of calling COMEDI_MODULES_MACRO
Signed-off-by: Arun Thomas <arun.thomas@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
| 50ae2a521f60a62dce3fedfc3046064a680a6d5e |
|
29-Jan-2010 |
Benjamin Adolphi <b.adolphi@googlemail.com> |
Staging: comedi: pcm3724: Checkpatch cleanups
This fixes all checkpatch issues in the pcm3724 comedi driver.
Signed-off-by: Benjamin Adolphi <b.adolphi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
| 0a85b6f0ab0d2edb0d41b32697111ce0e4f43496 |
|
08-Jun-2009 |
Mithlesh Thukral <mithlesh@linsyssoft.com> |
Staging: Comedi: Lindent changes to comdi driver in staging tree
Lindent changes to comdi driver in staging tree.
This patch is followed by the checkpatch.pl error fixes.
Did not make them part of this patch as the patch size is already huge.
Signed-off-by: Mithlesh Thukral <mithlesh@linsyssoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
| 68c3dbff9fc9f25872408d0e95980d41733d48d0 |
|
23-Apr-2009 |
Bill Pemberton <wfp5p@virginia.edu> |
Staging: comedi: fix the way structs are initialized.
Change from the foo: bar format to the .foo = bar format.
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
| c3744138715045adb316284ee7a1e608f0278f6c |
|
23-Apr-2009 |
Bill Pemberton <wfp5p@virginia.edu> |
Staging: comedi: remove assignment in conditionals
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
| da91b2692e0939b307f9047192d2b9fe07793e7a |
|
09-Apr-2009 |
Bill Pemberton <wfp5p@virginia.edu> |
Staging: comedi: fix "foo * bar" should be "foo *bar"
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
| 2696fb57e6af653dd8b4df41b16754579f42fc78 |
|
27-Mar-2009 |
Bill Pemberton <wfp5p@virginia.edu> |
Staging: comedi: Remove C99 comments
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
| 180089a8966e712cb8cb9af1d7401c3e12453d74 |
|
17-Mar-2009 |
Bill Pemberton <wfp5p@virginia.edu> |
Staging: comedi: pcm3724: Remove boardtype typedef
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
| 8e7b864b3c8357dd8318ade3970cd3b5fe0571e0 |
|
17-Mar-2009 |
Bill Pemberton <wfp5p@virginia.edu> |
Staging: comedi: Remove priv_pcm3724 typedef
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
| 0707bb04be89b18ee83b5a997e36cc585f0b988d |
|
17-Mar-2009 |
Bill Pemberton <wfp5p@virginia.edu> |
Staging: comedi: Remove comedi_devconfig typedef
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
| 90035c0886b256d75bced13b3b3cea5234aff136 |
|
17-Mar-2009 |
Bill Pemberton <wfp5p@virginia.edu> |
Staging: comedi: Remove comedi_insn typedef
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
| 139dfbdfacb02e3ef3df936d2fabd1ad5f14ea88 |
|
17-Mar-2009 |
Bill Pemberton <wfp5p@virginia.edu> |
Staging: comedi: Remove comedi_driver typedef
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
| 34c43922e62708d45e9660eee4b4f1fb7b4bf2c7 |
|
17-Mar-2009 |
Bill Pemberton <wfp5p@virginia.edu> |
Staging: comedi: Remove comedi_subdevice typedef
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
| 71b5f4f11971dea972832ad63a994c7e5b45db6b |
|
17-Mar-2009 |
Bill Pemberton <wfp5p@virginia.edu> |
Staging: comedi: Remove comedi_device typedef
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
| 790c55415aa31f4c732729f94d2c3a54f7d3bfc2 |
|
17-Mar-2009 |
Bill Pemberton <wfp5p@virginia.edu> |
Staging: comedi: Remove lsampl_t and sampl_t typedefs
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
| e30ec01134d2e8ddbb998dc4042a9c5fb814432d |
|
19-Feb-2009 |
Drew Csillag <drew_csillag@yahoo.com> |
Staging: comedi: add pcm3724 driver
Driver Advantech PCM-3724 card
From: Drew Csillag <drew_csillag@yahoo.com>
Cc: David Schleef <ds@schleef.org>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|