| // SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| /* |
| * Device Tree Source for the TMPV7708 |
| * |
| * (C) Copyright 2018 - 2020, Toshiba Corporation. |
| * (C) Copyright 2020, Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> |
| * |
| */ |
| |
| #include <dt-bindings/interrupt-controller/irq.h> |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| |
| /memreserve/ 0x81000000 0x00300000; /* cpu-release-addr */ |
| |
| / { |
| compatible = "toshiba,tmpv7708"; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| cpu-map { |
| cluster0 { |
| core0 { |
| cpu = <&cpu0>; |
| }; |
| core1 { |
| cpu = <&cpu1>; |
| }; |
| core2 { |
| cpu = <&cpu2>; |
| }; |
| core3 { |
| cpu = <&cpu3>; |
| }; |
| }; |
| |
| cluster1 { |
| core0 { |
| cpu = <&cpu4>; |
| }; |
| core1 { |
| cpu = <&cpu5>; |
| }; |
| core2 { |
| cpu = <&cpu6>; |
| }; |
| core3 { |
| cpu = <&cpu7>; |
| }; |
| }; |
| }; |
| |
| cpu0: cpu@0 { |
| compatible = "arm,cortex-a53"; |
| device_type = "cpu"; |
| enable-method = "spin-table"; |
| cpu-release-addr = <0x0 0x81100000>; |
| reg = <0x00>; |
| }; |
| |
| cpu1: cpu@1 { |
| compatible = "arm,cortex-a53"; |
| device_type = "cpu"; |
| enable-method = "spin-table"; |
| cpu-release-addr = <0x0 0x81100000>; |
| reg = <0x01>; |
| }; |
| |
| cpu2: cpu@2 { |
| compatible = "arm,cortex-a53"; |
| device_type = "cpu"; |
| enable-method = "spin-table"; |
| cpu-release-addr = <0x0 0x81100000>; |
| reg = <0x02>; |
| }; |
| |
| cpu3: cpu@3 { |
| compatible = "arm,cortex-a53"; |
| device_type = "cpu"; |
| enable-method = "spin-table"; |
| cpu-release-addr = <0x0 0x81100000>; |
| reg = <0x03>; |
| }; |
| |
| cpu4: cpu@100 { |
| compatible = "arm,cortex-a53"; |
| device_type = "cpu"; |
| enable-method = "spin-table"; |
| cpu-release-addr = <0x0 0x81100000>; |
| reg = <0x100>; |
| }; |
| |
| cpu5: cpu@101 { |
| compatible = "arm,cortex-a53"; |
| device_type = "cpu"; |
| enable-method = "spin-table"; |
| cpu-release-addr = <0x0 0x81100000>; |
| reg = <0x101>; |
| }; |
| |
| cpu6: cpu@102 { |
| compatible = "arm,cortex-a53"; |
| device_type = "cpu"; |
| enable-method = "spin-table"; |
| cpu-release-addr = <0x0 0x81100000>; |
| reg = <0x102>; |
| }; |
| |
| cpu7: cpu@103 { |
| compatible = "arm,cortex-a53"; |
| device_type = "cpu"; |
| enable-method = "spin-table"; |
| cpu-release-addr = <0x0 0x81100000>; |
| reg = <0x103>; |
| }; |
| }; |
| |
| timer { |
| compatible = "arm,armv8-timer"; |
| interrupt-parent = <&gic>; |
| interrupts = |
| <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; |
| }; |
| |
| uart_clk: uart-clk { |
| compatible = "fixed-clock"; |
| clock-frequency = <150000000>; |
| #clock-cells = <0>; |
| }; |
| |
| clk125mhz: clk125mhz { |
| compatible = "fixed-clock"; |
| clock-frequency = <125000000>; |
| #clock-cells = <0>; |
| clock-output-names = "clk125mhz"; |
| }; |
| |
| clk300mhz: clk300mhz { |
| compatible = "fixed-clock"; |
| clock-frequency = <300000000>; |
| #clock-cells = <0>; |
| clock-output-names = "clk300mhz"; |
| }; |
| |
| wdt_clk: wdt-clk { |
| compatible = "fixed-clock"; |
| clock-frequency = <150000000>; |
| #clock-cells = <0>; |
| }; |
| |
| soc { |
| #address-cells = <2>; |
| #size-cells = <2>; |
| compatible = "simple-bus"; |
| interrupt-parent = <&gic>; |
| ranges; |
| |
| gic: interrupt-controller@24001000 { |
| compatible = "arm,gic-400"; |
| interrupt-controller; |
| #interrupt-cells = <3>; |
| interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; |
| reg = <0 0x24001000 0 0x1000>, |
| <0 0x24002000 0 0x2000>, |
| <0 0x24004000 0 0x2000>, |
| <0 0x24006000 0 0x2000>; |
| }; |
| |
| pmux: pmux@24190000 { |
| compatible = "toshiba,tmpv7708-pinctrl"; |
| reg = <0 0x24190000 0 0x10000>; |
| }; |
| |
| gpio: gpio@28020000 { |
| compatible = "toshiba,gpio-tmpv7708"; |
| reg = <0 0x28020000 0 0x1000>; |
| #gpio-cells = <0x2>; |
| gpio-ranges = <&pmux 0 0 32>; |
| gpio-controller; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| interrupt-parent = <&gic>; |
| }; |
| |
| uart0: serial@28200000 { |
| compatible = "arm,pl011", "arm,primecell"; |
| reg = <0 0x28200000 0 0x1000>; |
| interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&uart0_pins>; |
| status = "disabled"; |
| }; |
| |
| uart1: serial@28201000 { |
| compatible = "arm,pl011", "arm,primecell"; |
| reg = <0 0x28201000 0 0x1000>; |
| interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&uart1_pins>; |
| status = "disabled"; |
| }; |
| |
| uart2: serial@28202000 { |
| compatible = "arm,pl011", "arm,primecell"; |
| reg = <0 0x28202000 0 0x1000>; |
| interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&uart2_pins>; |
| status = "disabled"; |
| }; |
| |
| uart3: serial@28203000 { |
| compatible = "arm,pl011", "arm,primecell"; |
| reg = <0 0x28203000 0 0x1000>; |
| interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&uart3_pins>; |
| status = "disabled"; |
| }; |
| |
| i2c0: i2c@28030000 { |
| compatible = "snps,designware-i2c"; |
| reg = <0 0x28030000 0 0x1000>; |
| interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c0_pins>; |
| clock-frequency = <400000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| i2c1: i2c@28031000 { |
| compatible = "snps,designware-i2c"; |
| reg = <0 0x28031000 0 0x1000>; |
| interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c1_pins>; |
| clock-frequency = <400000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| i2c2: i2c@28032000 { |
| compatible = "snps,designware-i2c"; |
| reg = <0 0x28032000 0 0x1000>; |
| interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c2_pins>; |
| clock-frequency = <400000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| i2c3: i2c@28033000 { |
| compatible = "snps,designware-i2c"; |
| reg = <0 0x28033000 0 0x1000>; |
| interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c3_pins>; |
| clock-frequency = <400000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| i2c4: i2c@28034000 { |
| compatible = "snps,designware-i2c"; |
| reg = <0 0x28034000 0 0x1000>; |
| interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c4_pins>; |
| clock-frequency = <400000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| i2c5: i2c@28035000 { |
| compatible = "snps,designware-i2c"; |
| reg = <0 0x28035000 0 0x1000>; |
| interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c5_pins>; |
| clock-frequency = <400000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| i2c6: i2c@28036000 { |
| compatible = "snps,designware-i2c"; |
| reg = <0 0x28036000 0 0x1000>; |
| interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c6_pins>; |
| clock-frequency = <400000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| i2c7: i2c@28037000 { |
| compatible = "snps,designware-i2c"; |
| reg = <0 0x28037000 0 0x1000>; |
| interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c7_pins>; |
| clock-frequency = <400000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| i2c8: i2c@28038000 { |
| compatible = "snps,designware-i2c"; |
| reg = <0 0x28038000 0 0x1000>; |
| interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c8_pins>; |
| clock-frequency = <400000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| spi0: spi@28140000 { |
| compatible = "arm,pl022", "arm,primecell"; |
| reg = <0 0x28140000 0 0x1000>; |
| interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&spi0_pins>; |
| num-cs = <1>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| spi1: spi@28141000 { |
| compatible = "arm,pl022", "arm,primecell"; |
| reg = <0 0x28141000 0 0x1000>; |
| interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&spi1_pins>; |
| num-cs = <1>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| spi2: spi@28142000 { |
| compatible = "arm,pl022", "arm,primecell"; |
| reg = <0 0x28142000 0 0x1000>; |
| interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&spi2_pins>; |
| num-cs = <1>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| spi3: spi@28143000 { |
| compatible = "arm,pl022", "arm,primecell"; |
| reg = <0 0x28143000 0 0x1000>; |
| interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&spi3_pins>; |
| num-cs = <1>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| spi4: spi@28144000 { |
| compatible = "arm,pl022", "arm,primecell"; |
| reg = <0 0x28144000 0 0x1000>; |
| interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&spi4_pins>; |
| num-cs = <1>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| spi5: spi@28145000 { |
| compatible = "arm,pl022", "arm,primecell"; |
| reg = <0 0x28145000 0 0x1000>; |
| interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&spi5_pins>; |
| num-cs = <1>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| spi6: spi@28146000 { |
| compatible = "arm,pl022", "arm,primecell"; |
| reg = <0 0x28146000 0 0x1000>; |
| interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&spi6_pins>; |
| num-cs = <1>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| piether: ethernet@28000000 { |
| compatible = "toshiba,visconti-dwmac", "snps,dwmac-4.20a"; |
| reg = <0 0x28000000 0 0x10000>; |
| interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "macirq"; |
| snps,txpbl = <4>; |
| snps,rxpbl = <4>; |
| snps,tso; |
| status = "disabled"; |
| }; |
| |
| wdt: wdt@28330000 { |
| compatible = "toshiba,visconti-wdt"; |
| reg = <0 0x28330000 0 0x1000>; |
| status = "disabled"; |
| }; |
| |
| pwm: pwm@241c0000 { |
| compatible = "toshiba,visconti-pwm"; |
| reg = <0 0x241c0000 0 0x1000>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pwm_mux>; |
| #pwm-cells = <2>; |
| status = "disabled"; |
| }; |
| }; |
| }; |
| |
| #include "tmpv7708_pins.dtsi" |