| // SPDX-License-Identifier: (GPL-2.0 OR MIT) |
| /* |
| * Copyright (c) 2018 MediaTek Inc. |
| * Author: Ben Ho <ben.ho@mediatek.com> |
| * Erin Lo <erin.lo@mediatek.com> |
| */ |
| |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/input/input.h> |
| #include "mt8183.dtsi" |
| #include "mt6358.dtsi" |
| |
| / { |
| aliases { |
| serial0 = &uart0; |
| }; |
| |
| chosen { |
| stdout-path = "serial0:115200n8"; |
| }; |
| |
| backlight_lcd0: backlight_lcd0 { |
| compatible = "pwm-backlight"; |
| pwms = <&pwm0 0 500000>; |
| power-supply = <&bl_pp5000>; |
| enable-gpios = <&pio 176 0>; |
| brightness-levels = <0 1023>; |
| num-interpolated-steps = <1023>; |
| default-brightness-level = <576>; |
| status = "okay"; |
| }; |
| |
| memory@40000000 { |
| device_type = "memory"; |
| reg = <0 0x40000000 0 0x80000000>; |
| }; |
| |
| clk32k: oscillator1 { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <32768>; |
| clock-output-names = "clk32k"; |
| }; |
| |
| it6505_pp18_reg: regulator0 { |
| compatible = "regulator-fixed"; |
| regulator-name = "it6505_pp18"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| gpio = <&pio 178 0>; |
| enable-active-high; |
| }; |
| |
| lcd_pp3300: regulator1 { |
| compatible = "regulator-fixed"; |
| regulator-name = "lcd_pp3300"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-always-on; |
| regulator-boot-on; |
| }; |
| |
| bl_pp5000: regulator2 { |
| compatible = "regulator-fixed"; |
| regulator-name = "bl_pp5000"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| regulator-always-on; |
| regulator-boot-on; |
| }; |
| |
| mmc1_fixed_power: regulator3 { |
| compatible = "regulator-fixed"; |
| regulator-name = "mmc1_power"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| }; |
| |
| mmc1_fixed_io: regulator4 { |
| compatible = "regulator-fixed"; |
| regulator-name = "mmc1_io"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| }; |
| |
| pp1800_alw: regulator5 { |
| compatible = "regulator-fixed"; |
| regulator-name = "pp1800_alw"; |
| regulator-always-on; |
| regulator-boot-on; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| }; |
| |
| pp3300_alw: regulator6 { |
| compatible = "regulator-fixed"; |
| regulator-name = "pp3300_alw"; |
| regulator-always-on; |
| regulator-boot-on; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| }; |
| |
| reserved_memory: reserved-memory { |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| |
| scp_mem_reserved: scp_mem_region { |
| compatible = "shared-dma-pool"; |
| reg = <0 0x50000000 0 0x2900000>; |
| no-map; |
| }; |
| }; |
| |
| max98357a: codec0 { |
| compatible = "maxim,max98357a"; |
| sdmode-gpios = <&pio 175 0>; |
| }; |
| |
| btsco: codec1 { |
| compatible = "linux,bt-sco"; |
| }; |
| |
| wifi_pwrseq: wifi-pwrseq { |
| compatible = "mmc-pwrseq-simple"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&wifi_pins_pwrseq>; |
| |
| /* Toggle WIFI_ENABLE to reset the chip. */ |
| reset-gpios = <&pio 119 1>; |
| }; |
| |
| wifi_wakeup: wifi-wakeup { |
| compatible = "gpio-keys"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&wifi_pins_wakeup>; |
| |
| wowlan { |
| label = "Wake on WiFi"; |
| gpios = <&pio 113 GPIO_ACTIVE_HIGH>; |
| linux,code = <KEY_WAKEUP>; |
| wakeup-source; |
| }; |
| }; |
| |
| tboard_thermistor1: thermal-sensor1 { |
| compatible = "generic-adc-thermal"; |
| #thermal-sensor-cells = <0>; |
| io-channels = <&auxadc 0>; |
| io-channel-names = "sensor-channel"; |
| temperature-lookup-table = < (-5000) 4241 |
| 0 4063 |
| 5000 3856 |
| 10000 3621 |
| 15000 3364 |
| 20000 3091 |
| 25000 2810 |
| 30000 2526 |
| 35000 2247 |
| 40000 1982 |
| 45000 1734 |
| 50000 1507 |
| 55000 1305 |
| 60000 1122 |
| 65000 964 |
| 70000 827 |
| 75000 710 |
| 80000 606 |
| 85000 519 |
| 90000 445 |
| 95000 382 |
| 100000 330 |
| 105000 284 |
| 110000 245 |
| 115000 213 |
| 120000 183 |
| 125000 161>; |
| }; |
| |
| tboard_thermistor2: thermal-sensor2 { |
| compatible = "generic-adc-thermal"; |
| #thermal-sensor-cells = <0>; |
| io-channels = <&auxadc 1>; |
| io-channel-names = "sensor-channel"; |
| temperature-lookup-table = < (-5000) 4241 |
| 0 4063 |
| 5000 3856 |
| 10000 3621 |
| 15000 3364 |
| 20000 3091 |
| 25000 2810 |
| 30000 2526 |
| 35000 2247 |
| 40000 1982 |
| 45000 1734 |
| 50000 1507 |
| 55000 1305 |
| 60000 1122 |
| 65000 964 |
| 70000 827 |
| 75000 710 |
| 80000 606 |
| 85000 519 |
| 90000 445 |
| 95000 382 |
| 100000 330 |
| 105000 284 |
| 110000 245 |
| 115000 213 |
| 120000 183 |
| 125000 161>; |
| }; |
| }; |
| |
| &auxadc { |
| status = "okay"; |
| }; |
| |
| &cpu0 { |
| proc-supply = <&mt6358_vproc12_reg>; |
| }; |
| |
| &cpu1 { |
| proc-supply = <&mt6358_vproc12_reg>; |
| }; |
| |
| &cpu2 { |
| proc-supply = <&mt6358_vproc12_reg>; |
| }; |
| |
| &cpu3 { |
| proc-supply = <&mt6358_vproc12_reg>; |
| }; |
| |
| &cpu4 { |
| proc-supply = <&mt6358_vproc11_reg>; |
| }; |
| |
| &cpu5 { |
| proc-supply = <&mt6358_vproc11_reg>; |
| }; |
| |
| &cpu6 { |
| proc-supply = <&mt6358_vproc11_reg>; |
| }; |
| |
| &cpu7 { |
| proc-supply = <&mt6358_vproc11_reg>; |
| }; |
| |
| &dsi0 { |
| status = "okay"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| panel: panel@0 { |
| /* compatible will be set in board dts */ |
| reg = <0>; |
| enable-gpios = <&pio 45 0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&panel_pins_default>; |
| avdd-supply = <&ppvarn_lcd>; |
| avee-supply = <&ppvarp_lcd>; |
| pp1800-supply = <&pp1800_lcd>; |
| backlight = <&backlight_lcd0>; |
| port { |
| panel_in: endpoint { |
| remote-endpoint = <&dsi_out>; |
| }; |
| }; |
| }; |
| |
| ports { |
| port { |
| dsi_out: endpoint { |
| remote-endpoint = <&panel_in>; |
| }; |
| }; |
| }; |
| }; |
| |
| &i2c0 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c0_pins>; |
| status = "okay"; |
| clock-frequency = <400000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| &i2c1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c1_pins>; |
| status = "okay"; |
| clock-frequency = <100000>; |
| }; |
| |
| &i2c3 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c3_pins>; |
| status = "okay"; |
| clock-frequency = <100000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| &i2c5 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c5_pins>; |
| status = "okay"; |
| clock-frequency = <100000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| &i2c6 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c6_pins>; |
| status = "okay"; |
| clock-frequency = <100000>; |
| }; |
| |
| &mipi_tx0 { |
| status = "okay"; |
| }; |
| |
| &mmc0 { |
| status = "okay"; |
| pinctrl-names = "default", "state_uhs"; |
| pinctrl-0 = <&mmc0_pins_default>; |
| pinctrl-1 = <&mmc0_pins_uhs>; |
| bus-width = <8>; |
| max-frequency = <200000000>; |
| cap-mmc-highspeed; |
| mmc-hs200-1_8v; |
| mmc-hs400-1_8v; |
| cap-mmc-hw-reset; |
| no-sdio; |
| no-sd; |
| hs400-ds-delay = <0x12814>; |
| vmmc-supply = <&mt6358_vemc_reg>; |
| vqmmc-supply = <&mt6358_vio18_reg>; |
| assigned-clocks = <&topckgen CLK_TOP_MUX_MSDC50_0>; |
| assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL_CK>; |
| non-removable; |
| }; |
| |
| &mmc1 { |
| status = "okay"; |
| pinctrl-names = "default", "state_uhs"; |
| pinctrl-0 = <&mmc1_pins_default>; |
| pinctrl-1 = <&mmc1_pins_uhs>; |
| vmmc-supply = <&mmc1_fixed_power>; |
| vqmmc-supply = <&mmc1_fixed_io>; |
| mmc-pwrseq = <&wifi_pwrseq>; |
| bus-width = <4>; |
| max-frequency = <200000000>; |
| drv-type = <2>; |
| cap-sd-highspeed; |
| sd-uhs-sdr50; |
| sd-uhs-sdr104; |
| keep-power-in-suspend; |
| enable-sdio-wakeup; |
| cap-sdio-irq; |
| non-removable; |
| no-mmc; |
| no-sd; |
| assigned-clocks = <&topckgen CLK_TOP_MUX_MSDC30_1>; |
| assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL_D2>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| qca_wifi: qca-wifi@1 { |
| compatible = "qcom,ath10k"; |
| reg = <1>; |
| }; |
| }; |
| |
| &mt6358_vdram2_reg { |
| regulator-always-on; |
| }; |
| |
| &mt6358codec { |
| Avdd-supply = <&mt6358_vaud28_reg>; |
| }; |
| |
| &mt6358_vsim1_reg { |
| regulator-min-microvolt = <2700000>; |
| regulator-max-microvolt = <2700000>; |
| }; |
| |
| &mt6358_vsim2_reg { |
| regulator-min-microvolt = <2700000>; |
| regulator-max-microvolt = <2700000>; |
| }; |
| |
| &pio { |
| bt_pins: bt-pins { |
| pins_bt_en { |
| pinmux = <PINMUX_GPIO120__FUNC_GPIO120>; |
| output-low; |
| }; |
| }; |
| |
| ec_ap_int_odl: ec_ap_int_odl { |
| pins1 { |
| pinmux = <PINMUX_GPIO151__FUNC_GPIO151>; |
| input-enable; |
| bias-pull-up; |
| }; |
| }; |
| |
| h1_int_od_l: h1_int_od_l { |
| pins1 { |
| pinmux = <PINMUX_GPIO153__FUNC_GPIO153>; |
| input-enable; |
| }; |
| }; |
| |
| i2c0_pins: i2c0 { |
| pins_bus { |
| pinmux = <PINMUX_GPIO82__FUNC_SDA0>, |
| <PINMUX_GPIO83__FUNC_SCL0>; |
| mediatek,pull-up-adv = <3>; |
| mediatek,drive-strength-adv = <00>; |
| }; |
| }; |
| |
| i2c1_pins: i2c1 { |
| pins_bus { |
| pinmux = <PINMUX_GPIO81__FUNC_SDA1>, |
| <PINMUX_GPIO84__FUNC_SCL1>; |
| mediatek,pull-up-adv = <3>; |
| mediatek,drive-strength-adv = <00>; |
| }; |
| }; |
| |
| i2c2_pins: i2c2 { |
| pins_bus { |
| pinmux = <PINMUX_GPIO103__FUNC_SCL2>, |
| <PINMUX_GPIO104__FUNC_SDA2>; |
| bias-disable; |
| mediatek,drive-strength-adv = <00>; |
| }; |
| }; |
| |
| i2c3_pins: i2c3 { |
| pins_bus { |
| pinmux = <PINMUX_GPIO50__FUNC_SCL3>, |
| <PINMUX_GPIO51__FUNC_SDA3>; |
| mediatek,pull-up-adv = <3>; |
| mediatek,drive-strength-adv = <00>; |
| }; |
| }; |
| |
| i2c4_pins: i2c4 { |
| pins_bus { |
| pinmux = <PINMUX_GPIO105__FUNC_SCL4>, |
| <PINMUX_GPIO106__FUNC_SDA4>; |
| bias-disable; |
| mediatek,drive-strength-adv = <00>; |
| }; |
| }; |
| |
| i2c5_pins: i2c5 { |
| pins_bus { |
| pinmux = <PINMUX_GPIO48__FUNC_SCL5>, |
| <PINMUX_GPIO49__FUNC_SDA5>; |
| mediatek,pull-up-adv = <3>; |
| mediatek,drive-strength-adv = <00>; |
| }; |
| }; |
| |
| i2c6_pins: i2c6 { |
| pins_bus { |
| pinmux = <PINMUX_GPIO11__FUNC_SCL6>, |
| <PINMUX_GPIO12__FUNC_SDA6>; |
| bias-disable; |
| }; |
| }; |
| |
| mmc0_pins_default: mmc0-pins-default { |
| pins_cmd_dat { |
| pinmux = <PINMUX_GPIO123__FUNC_MSDC0_DAT0>, |
| <PINMUX_GPIO128__FUNC_MSDC0_DAT1>, |
| <PINMUX_GPIO125__FUNC_MSDC0_DAT2>, |
| <PINMUX_GPIO132__FUNC_MSDC0_DAT3>, |
| <PINMUX_GPIO126__FUNC_MSDC0_DAT4>, |
| <PINMUX_GPIO129__FUNC_MSDC0_DAT5>, |
| <PINMUX_GPIO127__FUNC_MSDC0_DAT6>, |
| <PINMUX_GPIO130__FUNC_MSDC0_DAT7>, |
| <PINMUX_GPIO122__FUNC_MSDC0_CMD>; |
| input-enable; |
| drive-strength = <MTK_DRIVE_14mA>; |
| mediatek,pull-up-adv = <01>; |
| }; |
| |
| pins_clk { |
| pinmux = <PINMUX_GPIO124__FUNC_MSDC0_CLK>; |
| drive-strength = <MTK_DRIVE_14mA>; |
| mediatek,pull-down-adv = <10>; |
| }; |
| |
| pins_rst { |
| pinmux = <PINMUX_GPIO133__FUNC_MSDC0_RSTB>; |
| drive-strength = <MTK_DRIVE_14mA>; |
| mediatek,pull-down-adv = <01>; |
| }; |
| }; |
| |
| mmc0_pins_uhs: mmc0-pins-uhs { |
| pins_cmd_dat { |
| pinmux = <PINMUX_GPIO123__FUNC_MSDC0_DAT0>, |
| <PINMUX_GPIO128__FUNC_MSDC0_DAT1>, |
| <PINMUX_GPIO125__FUNC_MSDC0_DAT2>, |
| <PINMUX_GPIO132__FUNC_MSDC0_DAT3>, |
| <PINMUX_GPIO126__FUNC_MSDC0_DAT4>, |
| <PINMUX_GPIO129__FUNC_MSDC0_DAT5>, |
| <PINMUX_GPIO127__FUNC_MSDC0_DAT6>, |
| <PINMUX_GPIO130__FUNC_MSDC0_DAT7>, |
| <PINMUX_GPIO122__FUNC_MSDC0_CMD>; |
| input-enable; |
| drive-strength = <MTK_DRIVE_14mA>; |
| mediatek,pull-up-adv = <01>; |
| }; |
| |
| pins_clk { |
| pinmux = <PINMUX_GPIO124__FUNC_MSDC0_CLK>; |
| drive-strength = <MTK_DRIVE_14mA>; |
| mediatek,pull-down-adv = <10>; |
| }; |
| |
| pins_ds { |
| pinmux = <PINMUX_GPIO131__FUNC_MSDC0_DSL>; |
| drive-strength = <MTK_DRIVE_14mA>; |
| mediatek,pull-down-adv = <10>; |
| }; |
| |
| pins_rst { |
| pinmux = <PINMUX_GPIO133__FUNC_MSDC0_RSTB>; |
| drive-strength = <MTK_DRIVE_14mA>; |
| mediatek,pull-up-adv = <01>; |
| }; |
| }; |
| |
| mmc1_pins_default: mmc1-pins-default { |
| pins_cmd_dat { |
| pinmux = <PINMUX_GPIO31__FUNC_MSDC1_CMD>, |
| <PINMUX_GPIO32__FUNC_MSDC1_DAT0>, |
| <PINMUX_GPIO34__FUNC_MSDC1_DAT1>, |
| <PINMUX_GPIO33__FUNC_MSDC1_DAT2>, |
| <PINMUX_GPIO30__FUNC_MSDC1_DAT3>; |
| input-enable; |
| mediatek,pull-up-adv = <10>; |
| }; |
| |
| pins_clk { |
| pinmux = <PINMUX_GPIO29__FUNC_MSDC1_CLK>; |
| input-enable; |
| mediatek,pull-down-adv = <10>; |
| }; |
| }; |
| |
| mmc1_pins_uhs: mmc1-pins-uhs { |
| pins_cmd_dat { |
| pinmux = <PINMUX_GPIO31__FUNC_MSDC1_CMD>, |
| <PINMUX_GPIO32__FUNC_MSDC1_DAT0>, |
| <PINMUX_GPIO34__FUNC_MSDC1_DAT1>, |
| <PINMUX_GPIO33__FUNC_MSDC1_DAT2>, |
| <PINMUX_GPIO30__FUNC_MSDC1_DAT3>; |
| drive-strength = <MTK_DRIVE_6mA>; |
| input-enable; |
| mediatek,pull-up-adv = <10>; |
| }; |
| |
| pins_clk { |
| pinmux = <PINMUX_GPIO29__FUNC_MSDC1_CLK>; |
| drive-strength = <MTK_DRIVE_8mA>; |
| mediatek,pull-down-adv = <10>; |
| input-enable; |
| }; |
| }; |
| |
| panel_pins_default: panel_pins_default { |
| panel_reset { |
| pinmux = <PINMUX_GPIO45__FUNC_GPIO45>; |
| output-low; |
| bias-pull-up; |
| }; |
| }; |
| |
| pwm0_pin_default: pwm0_pin_default { |
| pins1 { |
| pinmux = <PINMUX_GPIO176__FUNC_GPIO176>; |
| output-high; |
| bias-pull-up; |
| }; |
| pins2 { |
| pinmux = <PINMUX_GPIO43__FUNC_DISP_PWM>; |
| }; |
| }; |
| |
| scp_pins: scp { |
| pins_scp_uart { |
| pinmux = <PINMUX_GPIO110__FUNC_TP_URXD1_AO>, |
| <PINMUX_GPIO112__FUNC_TP_UTXD1_AO>; |
| }; |
| }; |
| |
| spi0_pins: spi0 { |
| pins_spi{ |
| pinmux = <PINMUX_GPIO85__FUNC_SPI0_MI>, |
| <PINMUX_GPIO86__FUNC_GPIO86>, |
| <PINMUX_GPIO87__FUNC_SPI0_MO>, |
| <PINMUX_GPIO88__FUNC_SPI0_CLK>; |
| bias-disable; |
| }; |
| }; |
| |
| spi1_pins: spi1 { |
| pins_spi{ |
| pinmux = <PINMUX_GPIO161__FUNC_SPI1_A_MI>, |
| <PINMUX_GPIO162__FUNC_SPI1_A_CSB>, |
| <PINMUX_GPIO163__FUNC_SPI1_A_MO>, |
| <PINMUX_GPIO164__FUNC_SPI1_A_CLK>; |
| bias-disable; |
| }; |
| }; |
| |
| spi2_pins: spi2 { |
| pins_spi{ |
| pinmux = <PINMUX_GPIO0__FUNC_SPI2_CSB>, |
| <PINMUX_GPIO1__FUNC_SPI2_MO>, |
| <PINMUX_GPIO2__FUNC_SPI2_CLK>; |
| bias-disable; |
| }; |
| pins_spi_mi { |
| pinmux = <PINMUX_GPIO94__FUNC_SPI2_MI>; |
| mediatek,pull-down-adv = <00>; |
| }; |
| }; |
| |
| spi3_pins: spi3 { |
| pins_spi{ |
| pinmux = <PINMUX_GPIO21__FUNC_SPI3_MI>, |
| <PINMUX_GPIO22__FUNC_SPI3_CSB>, |
| <PINMUX_GPIO23__FUNC_SPI3_MO>, |
| <PINMUX_GPIO24__FUNC_SPI3_CLK>; |
| bias-disable; |
| }; |
| }; |
| |
| spi4_pins: spi4 { |
| pins_spi{ |
| pinmux = <PINMUX_GPIO17__FUNC_SPI4_MI>, |
| <PINMUX_GPIO18__FUNC_SPI4_CSB>, |
| <PINMUX_GPIO19__FUNC_SPI4_MO>, |
| <PINMUX_GPIO20__FUNC_SPI4_CLK>; |
| bias-disable; |
| }; |
| }; |
| |
| spi5_pins: spi5 { |
| pins_spi{ |
| pinmux = <PINMUX_GPIO13__FUNC_SPI5_MI>, |
| <PINMUX_GPIO14__FUNC_SPI5_CSB>, |
| <PINMUX_GPIO15__FUNC_SPI5_MO>, |
| <PINMUX_GPIO16__FUNC_SPI5_CLK>; |
| bias-disable; |
| }; |
| }; |
| |
| uart0_pins_default: uart0-pins-default { |
| pins_rx { |
| pinmux = <PINMUX_GPIO95__FUNC_URXD0>; |
| input-enable; |
| bias-pull-up; |
| }; |
| pins_tx { |
| pinmux = <PINMUX_GPIO96__FUNC_UTXD0>; |
| }; |
| }; |
| |
| uart1_pins_default: uart1-pins-default { |
| pins_rx { |
| pinmux = <PINMUX_GPIO121__FUNC_URXD1>; |
| input-enable; |
| bias-pull-up; |
| }; |
| pins_tx { |
| pinmux = <PINMUX_GPIO115__FUNC_UTXD1>; |
| }; |
| pins_rts { |
| pinmux = <PINMUX_GPIO47__FUNC_URTS1>; |
| output-enable; |
| }; |
| pins_cts { |
| pinmux = <PINMUX_GPIO46__FUNC_UCTS1>; |
| input-enable; |
| }; |
| }; |
| |
| uart1_pins_sleep: uart1-pins-sleep { |
| pins_rx { |
| pinmux = <PINMUX_GPIO121__FUNC_GPIO121>; |
| input-enable; |
| bias-pull-up; |
| }; |
| pins_tx { |
| pinmux = <PINMUX_GPIO115__FUNC_UTXD1>; |
| }; |
| pins_rts { |
| pinmux = <PINMUX_GPIO47__FUNC_URTS1>; |
| output-enable; |
| }; |
| pins_cts { |
| pinmux = <PINMUX_GPIO46__FUNC_UCTS1>; |
| input-enable; |
| }; |
| }; |
| |
| wifi_pins_pwrseq: wifi-pins-pwrseq { |
| pins_wifi_enable { |
| pinmux = <PINMUX_GPIO119__FUNC_GPIO119>; |
| output-low; |
| }; |
| }; |
| |
| wifi_pins_wakeup: wifi-pins-wakeup { |
| pins_wifi_wakeup { |
| pinmux = <PINMUX_GPIO113__FUNC_GPIO113>; |
| input-enable; |
| }; |
| }; |
| }; |
| |
| &pwm0 { |
| status = "okay"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pwm0_pin_default>; |
| }; |
| |
| &scp { |
| status = "okay"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&scp_pins>; |
| |
| cros_ec { |
| compatible = "google,cros-ec-rpmsg"; |
| mtk,rpmsg-name = "cros-ec-rpmsg"; |
| }; |
| }; |
| |
| &mfg { |
| domain-supply = <&mt6358_vgpu_reg>; |
| }; |
| |
| &soc_data { |
| status = "okay"; |
| }; |
| |
| &spi0 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&spi0_pins>; |
| mediatek,pad-select = <0>; |
| status = "okay"; |
| cs-gpios = <&pio 86 GPIO_ACTIVE_LOW>; |
| |
| cr50@0 { |
| compatible = "google,cr50"; |
| reg = <0>; |
| spi-max-frequency = <1000000>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&h1_int_od_l>; |
| interrupt-parent = <&pio>; |
| interrupts = <153 IRQ_TYPE_EDGE_RISING>; |
| }; |
| }; |
| |
| &spi1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&spi1_pins>; |
| mediatek,pad-select = <0>; |
| status = "okay"; |
| |
| w25q64dw: spi-flash@0 { |
| compatible = "winbond,w25q64dw", "jedec,spi-nor"; |
| reg = <0>; |
| spi-max-frequency = <25000000>; |
| }; |
| }; |
| |
| &spi2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&spi2_pins>; |
| mediatek,pad-select = <0>; |
| status = "okay"; |
| |
| cros_ec: cros-ec@0 { |
| compatible = "google,cros-ec-spi"; |
| reg = <0>; |
| spi-max-frequency = <3000000>; |
| interrupt-parent = <&pio>; |
| interrupts = <151 IRQ_TYPE_LEVEL_LOW>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&ec_ap_int_odl>; |
| |
| i2c_tunnel: i2c-tunnel { |
| compatible = "google,cros-ec-i2c-tunnel"; |
| google,remote-bus = <1>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| usbc_extcon: extcon0 { |
| compatible = "google,extcon-usbc-cros-ec"; |
| google,usb-port-id = <0>; |
| }; |
| }; |
| }; |
| |
| &spi3 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&spi3_pins>; |
| mediatek,pad-select = <0>; |
| status = "disabled"; |
| }; |
| |
| &spi4 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&spi4_pins>; |
| mediatek,pad-select = <0>; |
| status = "disabled"; |
| }; |
| |
| &spi5 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&spi5_pins>; |
| mediatek,pad-select = <0>; |
| status = "disabled"; |
| }; |
| |
| &ssusb { |
| dr_mode = "host"; |
| wakeup-source; |
| vusb33-supply = <&mt6358_vusb_reg>; |
| status = "okay"; |
| }; |
| |
| &u3phy { |
| status = "okay"; |
| }; |
| |
| &uart0 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&uart0_pins_default>; |
| status = "okay"; |
| }; |
| |
| &uart1 { |
| pinctrl-names = "default", "sleep"; |
| pinctrl-0 = <&uart1_pins_default>; |
| pinctrl-1 = <&uart1_pins_sleep>; |
| status = "okay"; |
| interrupts-extended = <&sysirq GIC_SPI 92 IRQ_TYPE_LEVEL_LOW>, |
| <&pio 121 IRQ_TYPE_EDGE_FALLING>; |
| |
| bluetooth: bluetooth { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&bt_pins>; |
| status = "okay"; |
| compatible = "qcom,qca6174-bt"; |
| enable-gpios = <&pio 120 0>; |
| clocks = <&clk32k>; |
| firmware-name = "nvm_00440302_i2s.bin"; |
| }; |
| }; |
| |
| &usb_host { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| vusb33-supply = <&mt6358_vusb_reg>; |
| status = "okay"; |
| |
| hub@1 { |
| compatible = "usb5e3,610"; |
| reg = <1>; |
| }; |
| }; |
| |
| #include <arm/cros-ec-keyboard.dtsi> |
| #include <arm/cros-ec-sbs.dtsi> |