| /* |
| * Copyright 2014 Chen-Yu Tsai |
| * |
| * Chen-Yu Tsai <wens@csie.org> |
| * |
| * This file is dual-licensed: you can use it either under the terms |
| * of the GPL or the X11 license, at your option. Note that this dual |
| * licensing only applies to this file, and not this project as a |
| * whole. |
| * |
| * a) This file is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of the |
| * License, or (at your option) any later version. |
| * |
| * This file is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * Or, alternatively, |
| * |
| * b) Permission is hereby granted, free of charge, to any person |
| * obtaining a copy of this software and associated documentation |
| * files (the "Software"), to deal in the Software without |
| * restriction, including without limitation the rights to use, |
| * copy, modify, merge, publish, distribute, sublicense, and/or |
| * sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following |
| * conditions: |
| * |
| * The above copyright notice and this permission notice shall be |
| * included in all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, |
| * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES |
| * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
| * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT |
| * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, |
| * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
| * OTHER DEALINGS IN THE SOFTWARE. |
| */ |
| |
| #include "sun8i-a23-a33.dtsi" |
| #include <dt-bindings/thermal/thermal.h> |
| |
| / { |
| cpu0_opp_table: opp_table0 { |
| compatible = "operating-points-v2"; |
| opp-shared; |
| |
| opp-120000000 { |
| opp-hz = /bits/ 64 <120000000>; |
| opp-microvolt = <1040000>; |
| clock-latency-ns = <244144>; /* 8 32k periods */ |
| }; |
| |
| opp-240000000 { |
| opp-hz = /bits/ 64 <240000000>; |
| opp-microvolt = <1040000>; |
| clock-latency-ns = <244144>; /* 8 32k periods */ |
| }; |
| |
| opp-312000000 { |
| opp-hz = /bits/ 64 <312000000>; |
| opp-microvolt = <1040000>; |
| clock-latency-ns = <244144>; /* 8 32k periods */ |
| }; |
| |
| opp-408000000 { |
| opp-hz = /bits/ 64 <408000000>; |
| opp-microvolt = <1040000>; |
| clock-latency-ns = <244144>; /* 8 32k periods */ |
| }; |
| |
| opp-480000000 { |
| opp-hz = /bits/ 64 <480000000>; |
| opp-microvolt = <1040000>; |
| clock-latency-ns = <244144>; /* 8 32k periods */ |
| }; |
| |
| opp-504000000 { |
| opp-hz = /bits/ 64 <504000000>; |
| opp-microvolt = <1040000>; |
| clock-latency-ns = <244144>; /* 8 32k periods */ |
| }; |
| |
| opp-600000000 { |
| opp-hz = /bits/ 64 <600000000>; |
| opp-microvolt = <1040000>; |
| clock-latency-ns = <244144>; /* 8 32k periods */ |
| }; |
| |
| opp-648000000 { |
| opp-hz = /bits/ 64 <648000000>; |
| opp-microvolt = <1040000>; |
| clock-latency-ns = <244144>; /* 8 32k periods */ |
| }; |
| |
| opp-720000000 { |
| opp-hz = /bits/ 64 <720000000>; |
| opp-microvolt = <1100000>; |
| clock-latency-ns = <244144>; /* 8 32k periods */ |
| }; |
| |
| opp-816000000 { |
| opp-hz = /bits/ 64 <816000000>; |
| opp-microvolt = <1100000>; |
| clock-latency-ns = <244144>; /* 8 32k periods */ |
| }; |
| |
| opp-912000000 { |
| opp-hz = /bits/ 64 <912000000>; |
| opp-microvolt = <1200000>; |
| clock-latency-ns = <244144>; /* 8 32k periods */ |
| }; |
| |
| opp-1008000000 { |
| opp-hz = /bits/ 64 <1008000000>; |
| opp-microvolt = <1200000>; |
| clock-latency-ns = <244144>; /* 8 32k periods */ |
| }; |
| }; |
| |
| cpus { |
| cpu@0 { |
| clocks = <&ccu CLK_CPUX>; |
| clock-names = "cpu"; |
| operating-points-v2 = <&cpu0_opp_table>; |
| #cooling-cells = <2>; |
| }; |
| |
| cpu1: cpu@1 { |
| clocks = <&ccu CLK_CPUX>; |
| clock-names = "cpu"; |
| operating-points-v2 = <&cpu0_opp_table>; |
| #cooling-cells = <2>; |
| }; |
| |
| cpu2: cpu@2 { |
| compatible = "arm,cortex-a7"; |
| device_type = "cpu"; |
| reg = <2>; |
| clocks = <&ccu CLK_CPUX>; |
| clock-names = "cpu"; |
| operating-points-v2 = <&cpu0_opp_table>; |
| #cooling-cells = <2>; |
| }; |
| |
| cpu3: cpu@3 { |
| compatible = "arm,cortex-a7"; |
| device_type = "cpu"; |
| reg = <3>; |
| clocks = <&ccu CLK_CPUX>; |
| clock-names = "cpu"; |
| operating-points-v2 = <&cpu0_opp_table>; |
| #cooling-cells = <2>; |
| }; |
| }; |
| |
| iio-hwmon { |
| compatible = "iio-hwmon"; |
| io-channels = <&ths>; |
| }; |
| |
| mali_opp_table: gpu-opp-table { |
| compatible = "operating-points-v2"; |
| |
| opp-144000000 { |
| opp-hz = /bits/ 64 <144000000>; |
| }; |
| |
| opp-240000000 { |
| opp-hz = /bits/ 64 <240000000>; |
| }; |
| |
| opp-384000000 { |
| opp-hz = /bits/ 64 <384000000>; |
| }; |
| }; |
| |
| sound: sound { |
| compatible = "simple-audio-card"; |
| simple-audio-card,name = "sun8i-a33-audio"; |
| simple-audio-card,format = "i2s"; |
| simple-audio-card,frame-master = <&link_codec>; |
| simple-audio-card,bitclock-master = <&link_codec>; |
| simple-audio-card,mclk-fs = <128>; |
| simple-audio-card,aux-devs = <&codec_analog>; |
| simple-audio-card,routing = |
| "Left DAC", "DACL", |
| "Right DAC", "DACR"; |
| status = "disabled"; |
| |
| simple-audio-card,cpu { |
| sound-dai = <&dai>; |
| }; |
| |
| link_codec: simple-audio-card,codec { |
| sound-dai = <&codec>; |
| }; |
| }; |
| |
| soc { |
| video-codec@1c0e000 { |
| compatible = "allwinner,sun8i-a33-video-engine"; |
| reg = <0x01c0e000 0x1000>; |
| clocks = <&ccu CLK_BUS_VE>, <&ccu CLK_VE>, |
| <&ccu CLK_DRAM_VE>; |
| clock-names = "ahb", "mod", "ram"; |
| resets = <&ccu RST_BUS_VE>; |
| interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; |
| allwinner,sram = <&ve_sram 1>; |
| }; |
| |
| crypto: crypto-engine@1c15000 { |
| compatible = "allwinner,sun8i-a33-crypto"; |
| reg = <0x01c15000 0x1000>; |
| interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ccu CLK_BUS_SS>, <&ccu CLK_SS>; |
| clock-names = "ahb", "mod"; |
| resets = <&ccu RST_BUS_SS>; |
| reset-names = "ahb"; |
| }; |
| |
| dai: dai@1c22c00 { |
| #sound-dai-cells = <0>; |
| compatible = "allwinner,sun6i-a31-i2s"; |
| reg = <0x01c22c00 0x200>; |
| interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>; |
| clock-names = "apb", "mod"; |
| resets = <&ccu RST_BUS_CODEC>; |
| dmas = <&dma 15>, <&dma 15>; |
| dma-names = "rx", "tx"; |
| status = "disabled"; |
| }; |
| |
| codec: codec@1c22e00 { |
| #sound-dai-cells = <0>; |
| compatible = "allwinner,sun8i-a33-codec"; |
| reg = <0x01c22e00 0x400>; |
| interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>; |
| clock-names = "bus", "mod"; |
| status = "disabled"; |
| }; |
| |
| ths: ths@1c25000 { |
| compatible = "allwinner,sun8i-a33-ths"; |
| reg = <0x01c25000 0x100>; |
| #thermal-sensor-cells = <0>; |
| #io-channel-cells = <0>; |
| }; |
| |
| dsi: dsi@1ca0000 { |
| compatible = "allwinner,sun6i-a31-mipi-dsi"; |
| reg = <0x01ca0000 0x1000>; |
| interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ccu CLK_BUS_MIPI_DSI>, |
| <&ccu CLK_DSI_SCLK>; |
| clock-names = "bus", "mod"; |
| resets = <&ccu RST_BUS_MIPI_DSI>; |
| phys = <&dphy>; |
| phy-names = "dphy"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port { |
| dsi_in_tcon0: endpoint { |
| remote-endpoint = <&tcon0_out_dsi>; |
| }; |
| }; |
| }; |
| |
| dphy: d-phy@1ca1000 { |
| compatible = "allwinner,sun6i-a31-mipi-dphy"; |
| reg = <0x01ca1000 0x1000>; |
| clocks = <&ccu CLK_BUS_MIPI_DSI>, |
| <&ccu CLK_DSI_DPHY>; |
| clock-names = "bus", "mod"; |
| resets = <&ccu RST_BUS_MIPI_DSI>; |
| status = "disabled"; |
| #phy-cells = <0>; |
| }; |
| }; |
| |
| thermal-zones { |
| cpu-thermal { |
| /* milliseconds */ |
| polling-delay-passive = <250>; |
| polling-delay = <1000>; |
| thermal-sensors = <&ths>; |
| |
| cooling-maps { |
| map0 { |
| trip = <&cpu_alert0>; |
| cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| }; |
| map1 { |
| trip = <&cpu_alert1>; |
| cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| }; |
| |
| map2 { |
| trip = <&gpu_alert0>; |
| cooling-device = <&mali 1 THERMAL_NO_LIMIT>; |
| }; |
| |
| map3 { |
| trip = <&gpu_alert1>; |
| cooling-device = <&mali 2 THERMAL_NO_LIMIT>; |
| }; |
| }; |
| |
| trips { |
| cpu_alert0: cpu_alert0 { |
| /* milliCelsius */ |
| temperature = <75000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| |
| gpu_alert0: gpu_alert0 { |
| /* milliCelsius */ |
| temperature = <85000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| |
| cpu_alert1: cpu_alert1 { |
| /* milliCelsius */ |
| temperature = <90000>; |
| hysteresis = <2000>; |
| type = "hot"; |
| }; |
| |
| gpu_alert1: gpu_alert1 { |
| /* milliCelsius */ |
| temperature = <95000>; |
| hysteresis = <2000>; |
| type = "hot"; |
| }; |
| |
| cpu_crit: cpu_crit { |
| /* milliCelsius */ |
| temperature = <110000>; |
| hysteresis = <2000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| }; |
| }; |
| |
| &be0 { |
| compatible = "allwinner,sun8i-a33-display-backend"; |
| /* A33 has an extra "SAT" module packed inside the display backend */ |
| reg = <0x01e60000 0x10000>, <0x01e80000 0x1000>; |
| reg-names = "be", "sat"; |
| clocks = <&ccu CLK_BUS_DE_BE>, <&ccu CLK_DE_BE>, |
| <&ccu CLK_DRAM_DE_BE>, <&ccu CLK_BUS_SAT>; |
| clock-names = "ahb", "mod", |
| "ram", "sat"; |
| resets = <&ccu RST_BUS_DE_BE>, <&ccu RST_BUS_SAT>; |
| reset-names = "be", "sat"; |
| }; |
| |
| &ccu { |
| compatible = "allwinner,sun8i-a33-ccu"; |
| }; |
| |
| &de { |
| compatible = "allwinner,sun8i-a33-display-engine"; |
| }; |
| |
| &drc0 { |
| compatible = "allwinner,sun8i-a33-drc"; |
| }; |
| |
| &fe0 { |
| compatible = "allwinner,sun8i-a33-display-frontend"; |
| }; |
| |
| &mali { |
| operating-points-v2 = <&mali_opp_table>; |
| }; |
| |
| &pio { |
| compatible = "allwinner,sun8i-a33-pinctrl"; |
| interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; |
| |
| uart0_pb_pins: uart0-pb-pins { |
| pins = "PB0", "PB1"; |
| function = "uart0"; |
| }; |
| |
| }; |
| |
| &tcon0 { |
| compatible = "allwinner,sun8i-a33-tcon"; |
| }; |
| |
| &tcon0_out { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| tcon0_out_dsi: endpoint@1 { |
| reg = <1>; |
| remote-endpoint = <&dsi_in_tcon0>; |
| }; |
| }; |
| |
| &usb_otg { |
| compatible = "allwinner,sun8i-a33-musb"; |
| }; |
| |
| &usbphy { |
| compatible = "allwinner,sun8i-a33-usb-phy"; |
| reg = <0x01c19400 0x14>, <0x01c1a800 0x4>; |
| reg-names = "phy_ctrl", "pmu1"; |
| }; |