[go: nahoru, domu]

Jump to content

Dewar benzene

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by DMacks (talk | contribs) at 02:56, 22 February 2017 (→‎Hexamethyl Dewar benzene: +image, more specific relative stereochemistry). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Dewar benzene
Skeletal formula
The conjoined cyclobutene rings of Dewar benzene form an obtuse angle.
Ball-and-stick model
Names
IUPAC name
Bicyclo[2.2.0]hexa-2,5-diene
Identifiers
3D model (JSmol)
ChemSpider
  • InChI=1S/C6H6/c1-2-6-4-3-5(1)6/h1-6H checkY
    Key: CTLSARLLLBZBRV-UHFFFAOYSA-N checkY
  • InChI=1/C6H6/c1-2-6-4-3-5(1)6/h1-6H
    Key: CTLSARLLLBZBRV-UHFFFAOYAO
  • C\1=C\C2/C=C\C/12
Properties
C6H6
Molar mass 78.1 g·mol−1
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
☒N verify (what is checkY☒N ?)

Dewar benzene or bicyclo[2.2.0]hexa-2,5-diene is a bicyclic isomer of benzene with the molecular formula C6H6. The compound is named after James Dewar who included this structure in a list of possible C6H6 structures in 1867.[1] However, he did not propose it as the structure of benzene, and in fact he supported the correct structure previously proposed by August Kekulé in 1865.[2]

Structure and properties

Unlike benzene, Dewar benzene is not flat because the carbons where the rings join are bonded to four atoms rather than three. These carbons tend toward tetrahedral geometry, and the two cyclobutene rings make an angle where they are cis-fused to each each other. The compound has nevertheless considerable strain energy and reverts to benzene with a chemical half-life of two days. This thermal conversion is relatively slow because it is symmetry forbidden based on orbital symmetry arguments.[3]

Synthesis

The compound itself was first synthesized in 1962 as a tert-butyl derivative[4] and then as the unsubstituted compound by E.E. van Tamelen in 1963 by photolysis of cis-1,2-dihydro derivative of phthalic anhydride followed by oxidation with lead tetraacetate.[5][6]

Dewar benzene synthesis E. E. Van Tamelen, S. P. Pappas

"Dewar benzene" and benzene

It is sometimes incorrectly claimed that Dewar proposed his structure as the true structure of benzene. In fact, Dewar merely wrote the structure as one of seven possible isomers and believed that his experiments on benzene supported the (correct) structure that had been proposed by Kekulé.[2]

After the development in 1928 of the valence bond theory, the three possible Dewar structures were considered as minor resonance contributors in the overall description of benzene. The major resonance contributors are of course the two possible Kekulé structures.

Other classic structures that have been considered as possible benzene isomers are prismane, benzvalene and Claus' benzene. Prismane and benzvalene were synthesized in the 1970s; Claus' benzene is impossible to synthesize.[7]

Hexamethyl Dewar benzene

Hexamethyl Dewar benzene has been prepared by bicyclotrimerization of dimethylacetylene with aluminium chloride.[8] It undergoes an unusual rearrangement reaction with hydrohalic acids to form a pentamethylcyclopentadiene derivative,[9][10] and consequently can be used as a starting material for synthesising some pentamethylcyclopentadienyl organometallic compounds.[11][12]

Synthesis of the rhodium(III) dimer [Cp*RhCl2]2 from hexamethyl Dewar benzene
Synthesis of the rhodium(III) dimer [Cp*RhCl2]2 from hexamethyl Dewar benzene

One of the alkenes can be epoxidized using mCPBA,[13] peroxybenzoic acid,[14] or dimethyldioxirane (DMDO).[15] Using a peracid (mCPBA or peroxybenzoic acid), the epoxy product quickly rearranges, catalyzed by the acid byproduct of the epoxidation.[13]

Using DMDO gives the epoxide as a stable product—the byproduct of the epoxidation is neutral acetone. By varying the amount of DMDO, either the mono- or diepoxide can be formed, with the oxygen atoms exo on the bicyclic carbon framework.[15]

References

  1. ^ J. Dewar (1867). "On the Oxidation af Phenyl Alcohol, and a Mechanical Arrangement adapted to illustrate Structure in the Non-saturated Hydrocarbons". Proc. Royal Soc. Edinburgh. 6: 82–86.
  2. ^ a b W. Baker; D. H. Rouvray (1978). "Para-Bond or "Dewar" Benzene?". J. Chem. Educ. 55 (10): 645. doi:10.1021/ed055p645.
  3. ^ James O. Jensen (2004). "Vibrational Frequencies and Structural Determination of Dewar Benzene". J. Mol. Struct.:THEOCHEM. 680: 227–236. doi:10.1016/j.theochem.2004.03.042.
  4. ^ E. E. van Tamelen, S. P. Pappas (1962). "Chemistry of Dewar Benzene. 1,2,5-Tri-t-Butylbicyclo[2.2.0]Hexa-2,5-Diene". J. Am. Chem. Soc. 84 (19): 3789–3791. doi:10.1021/ja00878a054.
  5. ^ E. E. van Tamelen, S. P. Pappas (1963). "Bicyclo [2.2.0]hexa-2,5-diene". J. Am. Chem. Soc. 85 (20): 3297–3298. doi:10.1021/ja00903a056.
  6. ^ E. E. van Tamelen, S. P. Pappas, K. L. Kirk (1971). "Valence Bond Isomers of Aromatic Systems. Bicyclo[2.2.0]hexa-2,5-dienes (Dewar benzenes)". J. Am. Chem. Soc. 93 (23): 6092–6101. doi:10.1021/ja00752a021.{{cite journal}}: CS1 maint: multiple names: authors list (link)
  7. ^ Hoffmann, R.; Hopf, H. (2008). "Learning from molecules in distress". Angewandte Chemie International Edition in English. 47 (24): 4474–4481. doi:10.1002/anie.200705775. PMID 18418829.
  8. ^ Sami A. Shama and Carl C. Wamser (1990). "Hexamethyl Dewar Benzene". Organic Syntheses; Collected Volumes, vol. 7, p. 256.
  9. ^ Paquette, L. A.; Krow, G. R. (1968). "Electrophilic Additions to Hexamethyldewarbenzene". Tetrahedron Lett. 9 (17): 2139–2142. doi:10.1016/S0040-4039(00)89761-0.
  10. ^ Criegee, R.; Gruner, H. (1968). "Acid-catalyzed Rearrangements of Hexamethyl-prismane and Hexamethyl-Dewar-benzene". Angew. Chem. Int. Ed. 7 (6): 467–468. doi:10.1002/anie.196804672.
  11. ^ Kang, J. W.; Mosley, K.; Maitlis, P. M. (1968). "Mechanisms of Reactions of Dewar Hexamethylbenzene with Rhodium and Iridium Chlorides". Chem. Commun. (21): 1304–1305. doi:10.1039/C19680001304.
  12. ^ Kang, J. W.; Maitlis, P. M. (1968). "Conversion of Dewar Hexamethylbenzene to Pentamethylcyclopentadienylrhodium(III) Chloride". J. Am. Chem. Soc. 90 (12): 3259–3261. doi:10.1021/ja01014a063.
  13. ^ a b King, R. B.; Douglas, W. M.; Efraty, A. (1977). "5-Acetyl-1,2,3,4,5-pentamethylcyclopentadiene". Organic Syntheses. 56: 1.
  14. ^ Junker, Hans-Nikolaus; Schäfer, Wolfgang; Niedenbrück, Hans (1967). "Oxydationsreaktionen mit Hexamethyl-bicyclo[2.2.0]-hexadien-(2.5) (= Hexamethyl-Dewar-Benzol)" [Oxidation reactions with hexamethylbicyclo[2.2.0]-hexa-2,5-diene]. Chemische Berichte. 100 (8): 2508–2514. doi:10.1002/cber.19671000807.
  15. ^ a b Asouti, Amalia; Hadjiarapoglou, Lazaros P. (2000). "Regioselective and diastereoselective dimethyldioxirane epoxidation of substituted norbornenes and hexamethyl Dewar benzene". Tetrahedron Letters. 41 (4): 539–542. doi:10.1016/S0040-4039(99)02113-9.