Ferrocerium
Ferrocerium (also known in Europe as Auermetall) is a synthetic pyrophoric alloy of "mischmetal" (cerium, lanthanum, neodymium, other trace lanthanides and some iron – about 95% lanthanides and 5% iron) hardened by blending in oxides of iron and / or magnesium. When struck with a harder material, the mixture produces hot sparks that can reach temperatures of 3,315 °C (6,000 °F) when rapidly oxidized by the process of striking the rod: Striking both scrapes fragments off, exposing them to the oxygen in the air, and easily ignites them by friction heat, due to cerium's remarkably low ignition temperature ~170 °C (338 °F).
Its easy flammability gives ferrocerium many commercial applications, such as the ignition source for lighters, strikers for gas welding and cutting torches, deoxidization in metallurgy, and ferrocerium rods. Due to ferrocerium's ability to ignite in adverse conditions, rods of ferrocerium (also called "ferro rods", and "flint-spark-lighters") are commonly used as an emergency firelighting device in survival kits.[1] The ferrocerium is referred to as a "flint" in this case despite being dissimilar to natural flint as both are used in conjunction for firelighting, albeit with opposite mechanical operation.
Discovery
Ferrocerium alloy was invented in 1903 by the Austrian chemist Carl Auer. It takes its name from its two primary components: iron (from Template:Lang-la), and the rare-earth element cerium, which is the most prevalent of the lanthanides in the mixture. With the exception of the extra iron and magnesium oxides added to harden it, the mixture is approximately the combination found naturally in tailings from thorium mining which Auer was investigating.[2] The pyrophoric effect is dependent on the brittleness of the alloy and its low autoignition temperature.[3]
Composition
In Auer's first alloy, 30% iron (ferrum) was added to purified cerium, hence the name "ferro-cerium". Two subsequent Auermetalls were developed: The second also included lanthanum to produce brighter sparks, and the third added other heavy metals.
A modern ferrocerium firesteel product is composed of an alloy of rare-earth metals called mischmetal (containing approximately 20.8% iron, 41.8% cerium, about 4.4% each of praseodymium, neodymium, and magnesium, plus 24.2% lanthanum.[4]) A variety of other components are added to modify the spark and processing characteristics.[1] Most contemporary flints are hardened with iron oxide and magnesium oxide.
| Element | Cerium | Iron | Neodymium | Praseodymium | Magnesium | Lanthanum |
|---|---|---|---|---|---|---|
| Proportion | 41.8% | 20.8% | 4.4% | 4.4% | 4.4% | 24.2% |
Uses
Ferrocerium is used in firelighting in conjunction with steel, in a similar way to natural flint-and-steel, though ferrocerium takes on the opposite role to the traditional system; instead of a natural flint rock striking tiny iron particles from a firesteel, a steel striker (which may be in the form of hardened steel wheel) strikes particles of ferrocerium off of the "flint". This manual rubbing action, done by squeezing the handle, creates a spark due to cerium's low ignition temperature between 150 and 180 °C (302 and 356 °F). Carbon steel works better than most other materials in much the same way natural flint and firesteel are used.[citation needed]
It is most commonly used for Bunsen burners, and for propane grills, and oxyacetylene welding torches.[citation needed]
About 700 tons were produced in 2000.[citation needed]
References
- ^ a b Reinhardt, Klaus; Winkler, Herwig (2000). "Cerium Mischmetal, Cerium Alloys, and Cerium Compounds". Ullmann's Encyclopedia of Industrial Chemistry. John Wiley & Sons. doi:10.1002/14356007.a06_139. ISBN 3527306730.
- ^ van Weert, Ad; van Weert, Alice; Bromet, Joop (1995). The Legend of the Lighter. New York, NY: Abbeville Press. p. 45. ISBN 9781558598546.
- ^ Hirch, Alcan (2 September 1920). "Ferrocerium, its manufacture and uses". Iron Age. 106. Chilton Company: 575–576 – via Google Books.
- ^ "Ferrocerium rods". Jiangxi Metals Co., Ltd. 2008. Archived from the original on 24 October 2008 – via Alibaba.com.
External links
- Jorgenson, John D.; Corathers, Lisa A.; Gambogi, Joseph; Kuck, Peter H.; Magyar, Michael J.; Papp, John F.; Shedd, Kim B. (2006). "Minerals Yearbook 2006: Ferroalloys" (PDF). United States Geological Survey. Retrieved 2009-04-24.