Rast & Gasser M1898

Rast & Gasser M1898
Rast & Gasser M1898 Revolver from the Swedish Army Museum.
Type	Revolver
Place of origin	Austria-Hungary
Service history
In service	1898–1945 1898–1918 (Austria-Hungary)
Used by	Austria-Hungary Kingdom of Italy Kingdom of Yugoslavia
Wars	Boxer Rebellion World War I Polish-Soviet War World War II
Production history
Designer	August Rast
Manufacturer	Rast & Gasser
Produced	1898–1919
No. built	Up to 200,000
Specifications
Mass	935 g (2.1 lb) unloaded
Length	223 mm (8.8 in)
Barrel length	116 mm (4.6 in)
Cartridge	8mm Gasser
Action	Double-action revolver
Muzzle velocity	240 m/s (787.4 ft/s)
Feed system	8 round cylinder
Sights	Rear V-notch and front post

The Rast & Gasser M1898 is a double-action, solid-frame revolver that served as the standard sidearm for the Austro-Hungarian Army from 1898 to 1918, including during World War I. It was chambered for the 8mm Gasser cartridge, which was specifically designed for this revolver. The M1898 was manufactured by the Austrian firm Rast & Gasser and remained in service throughout the war due to its durability and reliability under harsh conditions.

History

The M1898 was designed to replace the Gasser M1870 revolver, which had been in service since the 1870s. The Rast & Gasser revolver introduced several improvements, including a double-action mechanism, which allowed for faster and more efficient use in combat. The revolver used an 8-round cylinder, which was one of the distinguishing features compared to other revolvers of the time, most of which held six rounds.

This model was adopted by the Austro-Hungarian Army in 1898 and saw widespread use during World War I. Although it was a solid and reliable weapon, it was eventually replaced by semi-automatic pistols after th e war.

180,000 copies were produced by the firm Leopold Gasser Waffenfabrik in Vienna from 1898 to 1912. Prior to the outbreak of the First World War, the M1898 was planned to be replaced in the Austro-Hungarian cavalry with the Roth–Steyr M1907, and in the infantry with the Steyr M1912. However production of newer pistols was insufficient and the weapon remained in service. It was specially-issued to NCOs, officers, and also as a secondary weapons for machine-gunners. In some armies it was used up through the Second World War, including Italy and Yugoslavia. The manufacturing quality and the strength of the solid-frame design made it a reliable and consistent military weapon.

The M1898 was copied in Belgium by Manufacture d'Armes Liégeoise in the 7.62 Nagant caliber.

Operation

The Rast & Gassers featured some new elements of revolver design, as well as older elements already obsolete at the time of its manufacture. A solid-frame double-action revolver, it had a loading-gate through which individual cartridges were loaded and extracted by an extractor rod. The firing pin was located on a transfer piece on the frame of the revolver rather than the hammer, an advancement at the time. Its ammunition was similar to but not interchangeable with that of the 8mm French Ordnance.

The cylinder could be removed by pulling down on a spring loaded screw and withdrawing the axis pin/ejector rod.

Loading

To load the M1898 the user must rotate the loading gate back, exposing the rear of the cylinder. Doing this disengages the hammer from the trigger, but the cylinder will still rotate if the trigger is squeezed. This feature makes loading much easier and faster. Cartridges are then inserted into the cylinder and the trigger squeezed to present the next empty chamber. After all the slots have been loaded, the loading-gate is closed by pushing it forward. The hammer is then rotated all the way back to the full-cocked position ready for firing.

To unload the M1898, the loading gate is rotated backwards to expose the back of the cylinder. The user then rotates the knurled handle of the ejector rod outwards, which can then be pushed backwards to punch out the spent casing from each cylinder chamber.

To remove the cylinder, the user must remove the cylinder arbor by pulling down on a spring loaded screw which nestles into a mortice on the barrel. While holding the screw down, the user can then simply pull the arbor forwards till it slips off of the frame. Then one must open the loading gate to allow the cylinder to fall out the right side of the frame.

Legacy

The Rast & Gasser M1898 is considered one of the last major military revolvers used by Austria-Hungary. Today, it is of interest to collectors and historical firearms enthusiasts, particularly due to its role in World War I and its unique 8-round cylinder design.

Other Specifications

• Rifling: 4-groove right-hand twist

See also

Small Arms of WWI Primer 021: Austro-Hungarian Revolver M1898 Rast & Gasser covers the history of the gun, as well as disassembly and firing.

Sources

• D. VENNER, Le Grand Livre des Armes, J. Grancher, 1979
• COLLECTIF (spécialistes tchèques), Encyclopédie illustrée des Armes des 1ère et 2e Guerres mondiales, Gründ,2001