Fichier:Mercury Transfer Module in space simulator ESA387743.jpg
Fichier d’origine (5 008 × 3 336 pixels, taille du fichier : 7,71 Mio, type MIME : image/jpeg)
Ce fichier et sa description proviennent de Wikimedia Commons.
Description
DescriptionMercury Transfer Module in space simulator ESA387743.jpg |
English: The BepiColombo Mercury Transfer Module has completed its final major test inside ESA’sLarge Space Simulator, proving it will be able to withstand the temperature extremes it will experience on its journey to Mercury.
On the one hand, the mission will be exposed to the cold vacuum of space. On the other, it will travel close to the Sun, receiving 10 times the solar energy than we do on Earth. This translates to about 11 kW per sq m at Mercury, with the spacecraft expected to endure heating to about 350ºC, similar to a pizza oven. Inside the simulator, the largest of its kind in Europe at 15m high and 10m wide, pumps create a vacuum a billion times lower than standard sea-level atmosphere, while the chamber’s walls are lined with tubes pumped with liquid nitrogen to create low temperatures of about –180ºC. At the same time, a set of 25kW IMAX projector-class lamps are used with mirrors to focus light onto the craft to generate the highest temperatures. During the latest tests, carried out between 24 November and 4 December 2017, the module was rotated through 13º either side to monitor the heating and distribution. The ion engines were also activated – without creating thrust from an ion beam given the confines of the test chamber – to confirm that the module's electric propulsion system can operate in this challenging environment The module is seen here stacked on a replica interface to mimic the science orbiters that it will be attached to during launch and the 7.2 year journey to Mercury. The four ion thrusters are seen on the top of module in this orientation. Not present in this test, the module will also be equipped with two solar wings that will unfold to a span of 30 m. The transfer module’s job is to carry ESA’s Mercury Planetary Orbiter and Japan’s Mercury Magnetospheric Orbiter to the planet, where they will separate and enter their respective orbits. The craft will use a combination of gravity assist flybys at Earth, Venus and Mercury along with the transfer module’s ion thrusters to reach its destination. The module will now be checked before the entire assembly is shipped to Europe’s Spaceport in Kourou, French Guiana next year. With this last major test complete, the mission is on track to be launched in the two-month window opening on 5 October 2018. Technical details about the Large Space SimulatorMore about BepiColombo’s high temperature challengeLatest news and background info about BepiColombo |
Date | |
Source | http://www.esa.int/spaceinimages/Images/2017/12/Mercury_Transfer_Module_in_space_simulator |
Auteur | European Space Agency |
Autorisation (Réutilisation de ce fichier) |
ESA–C. Carreau ,CC BY-SA 3.0 IGO |
Title InfoField | Mercury Transfer Module in space simulator |
Mission InfoField | BepiColombo |
Activity InfoField | Space Science |
Conditions d’utilisation
- Vous êtes libre :
- de partager – de copier, distribuer et transmettre cette œuvre
- d’adapter – de modifier cette œuvre
- Sous les conditions suivantes :
- paternité – Vous devez donner les informations appropriées concernant l'auteur, fournir un lien vers la licence et indiquer si des modifications ont été faites. Vous pouvez faire cela par tout moyen raisonnable, mais en aucune façon suggérant que l’auteur vous soutient ou approuve l’utilisation que vous en faites.
- partage à l’identique – Si vous modifiez, transformez, ou vous basez sur cette œuvre, vous devez distribuer votre contribution sous la même licence ou une licence compatible avec celle de l’original.
Légendes
Éléments décrits dans ce fichier
dépeint
7 décembre 2017
Historique du fichier
Cliquer sur une date et heure pour voir le fichier tel qu'il était à ce moment-là.
Date et heure | Vignette | Dimensions | Utilisateur | Commentaire | |
---|---|---|---|---|---|
actuel | 7 décembre 2017 à 18:55 | 5 008 × 3 336 (7,71 Mio) | Fæ | European Space Agency, Id 387743, http://www.esa.int/spaceinimages/Images/2017/12/Mercury_Transfer_Module_in_space_simulator, User:Fæ/Project_list/ESA |
Utilisation du fichier
La page suivante utilise ce fichier :
Usage global du fichier
Les autres wikis suivants utilisent ce fichier :
- Utilisation sur uk.wikipedia.org
Métadonnées
Ce fichier contient des informations supplémentaires, probablement ajoutées par l'appareil photo numérique ou le numériseur utilisé pour le créer.
Si le fichier a été modifié depuis son état original, certains détails peuvent ne pas refléter entièrement l'image modifiée.
Titre de l’image |
|
---|---|
Résolution horizontale | 240 pt/po |
Résolution verticale | 240 pt/po |
Logiciel utilisé | Adobe Photoshop Lightroom 6.12 (Macintosh) |
Date de modification du fichier | 30 novembre 2017 à 15:27 |
Auteur | C. Carreau |
Détenteur des droits d’auteur |
|
Version d’EXIF | 2.3 |
Date et heure de génération des données | 21 novembre 2017 à 13:16 |
Date et heure de la numérisation | 21 novembre 2017 à 13:16 |
Fractions de secondes de l’horodatage de la prise de vue originale | 44 |
Fractions de secondes de l’horodatage de la numérisation | 44 |
Espace colorimétrique | sRGB |
Note d’évaluation (sur 5) | 1 |
Date de la dernière modification des métadonnées | 30 novembre 2017 à 16:27 |
Identifiant unique du document original | 57799AC01DC647049DDDCBB34F42B0FE |
État des droits d’auteur | Soumis aux droits d’auteur |
Titre court |
|
Version d’IIM | 4 |