AU2005335219B2 - Multiuse location finder, communication, medical, control system - Google Patents

Description

WO 2007/018566 PCT/US2005/035931 2 4 6 8 MULTIUSE LOCATION FINDER, COMMUNICATION, MEDICAL, CONTROL SYSTEM 10 12 Applicant -Inventor: 14 FEHER Kamilo 16 18 Please note that pages 3 to 9 have been intentionally omitted. 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 2 WO 2007/018566 PCT/US2005/035931 2 ACRONYMS To facilitate comprehension of the current disclosure frequently used acronyms and or 4 abbreviations used in the prior art and/or in the current disclosure are highlighted in the following LIST of acronyms: 6 2G Second generation or 2 "d generation wireless or cellular system 3D three dimensional 8 3G Third Generation or 3rd generation wireless or cellular system 4G Fourth Generation wireless or cellular system 10 5G Fifth Generation or future generation AM Amplitude Modulation 12 AMC Adaptive Modulation and Coding ACM Adaptive Coding and Modulation 14 Bluetooth Wireless system standardized by the Bluetooth organization BPSK Binary Phase Shift Keying 16 BRA Bit Rate Agile or Bit Rate Adaptive BST Base Station Transceiver 18 BWA Broadband Wireless Access CC cross-correlation or cross-correlate 20 CCOR cross-correlation or cross-correlate CDMA Code Division Multiple Access 22 CM Clock Modulated CS Code Selectable 24 CSMA Collision Sense Multiple Access CL Clock Shaped 26 DECT Digital European Cordless Telecommunication DNA Deoxyribose Nucleic Acid 28 DS-SS Direct Sequence Spread Spectrum EDGE Enhanced Digital GSM Evolution; Evolution of GSM or E-GSM 30 EMI Electromagnetic Interference 10 WO 2007/018566 PCT/US2005/035931 FA Frequency Agile (selectable or switched IF or RF frequency) 2 FDM Frequency Division Multiplex FH-SS Frequency Hopped Spread Spectrum 4 FQPSK Feher's QPSK or Feher's patented QPSK FOC Fiber Optic Communication 6 FSK Frequency Shift Keying GFSK Gaussian Frequency Shift Keying 8 GPS Global Positioning System GPRS General Packet Radio Service 10 GMSK Gaussian Minimum Shift Keying GSM Global Mobile System 12 HDR Hybrid Defined Radio IEEE 802 Institute of Electrical and Electronics Engineers Standard Number 802 14 IR Infrared LAN Local Are Network 16 LINA Linearly amplified or Linear amplifier or linearized amplifier Non-Linearly LR Long Response 18 MES Modulation Embodiment Selectable MFS Modulation Format Selectable 20 MIMO Multiple Input Multiple Output MISO Multiple Input Single Output 22 MMIMO Multimode Multiple Input Multiple Output MSDR Multiple Software Defined Radio 24 NLA Non-Linearly Amplified or Non-Linear Amplifier NQM non-quadrature modulation 26 NonQUAD non-quadrature modulator NRZ Non Return to Zero 28 OFDM Orthogonal Frequency Division Multiple Access PDA Personal Digital Assistants 30 PDD Position Determining Device PDE Position Determining Entity 11 WO 2007/018566 PCT/US2005/035931 PTT push to talk 2 QUAD Quadrature; also used for quadrature modulation quad Quadrature; also used for quadrature modulation 4 QM Quadrature Modulation QPSK Quadrature Phase Shift Keying 6 RC Remote Control RFA Radio Frequency Agile 8 RFID Radio Frequency Identification Rx receive 10 SDR Software Defined Radio (SDR) SIMO Single Input Multiple Output 12 STCS Shaped Time Constrained Signal TBD to be decided 14 TCS Time Constrained Signal TDM Time Division Multiplex 16 TDMA Time Division Multiple Access TR transceiver (transmitter-receiver) 18 Tx transmit TV television 20 UMTS Universal Mobile Telecommunication System UNB Ultra narrowband or Ultra narrow band 22 URC Universal Remote Control UWB Ultrawideband or ultra wideband 24 UWN Ultrawideband -Ultra Narrow Band ViIP Video over Internet Protocol 26 VoIP Voice over Internet Protocol W waveform, wavelet or wave (signal element) 28 WAN Wide Area Network WCDMA Wideband Code Division Multiple Access 30 W-CDMA Wideband Code Division Multiple Access 12 Wi Fi Wireless Fidelity or related term used for systems such as IEEE 802.x 2 standardised systems; See also Wi-Fi Wi-Fi wireless fidelity 4 WLAN Wireless Local Area Network www World Wide Web (or WWW or) WEB 6 XCor cross-correlation or cross-correlator or cross-correlate 8 FIELD OF THE INVENTION The field of the invention includes wired and wireless communication, broadcasting, 10 entertainment, remote control, medical diagnostics, emergency and alarm, interactive touch screen, fingerprint controlled communication and control systems for single or multimode 12 communications, broadcasting, teleinformatics and telemetry systems. The disclosed subject matter is for multiuse and or multipurpose applications, devices 14 and systems, including systems for: position determination, location finding based services and applications, remote control, wireless, wired, cabled, internet, web based communication 16 systems, communicator devices, radio frequency identification (RFID) systems with single or plurality of devices, emergency and other alarm systems, medical patient monitor-sensor 18 devices, medical diagnostics devices, fingerprint identification, fingerprint control, interactive communication or control of communications and control systems, 20 communications, broadcasting, teleinformatics and telemetry systems. 22 BACKGROUND The reference to any prior art in this specification is not, and should not be taken as an 24 acknowledgement or any form of suggestion that the prior art forms part of the common general knowledge. 26 Prior art references disclose position location, tracking and communication devices. Exemplary prior art includes: U.S. Pat. 6,865,395, U.S. Pat.6,889,135, U.S. Pat 6,879,584, 28 U.S. Pat 6,876,859, U.S. Pat 6,876,310 and U.S. Pat 6,842,617. From the prior art it is known that it is often desired, and sometimes necessary, to know the position, that is, the 30 location of a wireless user. For example, the US Federal Communications Commission (FCC) has ordered an enhanced emergency 911 (emergency 911 or enhanced emergency E 13 911) wireless service that requires the location of a wireless terminal (e.g., a cellular phone) 2 to be provided to a Public Safety Answering Point (PSAP) each time a 911 call is made fiom the terminal. The recognised need for improved personal security and emergency response 4 capability has been documented in the prior art. In situations where an individual is injured, lost, or abducted, immediate notification of an emergency situation including location of the 6 emergency to a local law enforcement or emergency response organisation is required to maintain the safety of the individual and to mitigate or avoid severe and or tragic situations. 8 In addition to emergency situations, there is also a recognised need for improved personal healthcare and in particular patient monitor and other diagnostic systems. Patients 10 are often confined in a fixed area to cabled (or tethered) monitoring equipment. An illustrative, cited prior art reference, published by Baisa, N.: "Designing wireless interfaces 12 for patient monitoring", RF Design Magazine April 2005, highlights that recent advances in wireless technologies now make it possible to free patients from their equipment, allowing 14 greater freedom and even making possible monitoring by their health provider while the patient is on the go. The position of a wireless terminal may be estimated using various 16 techniques including "range-domain" and "position-domain" techniques as well as other techniques and/or combined hybrid techniques. 18 Acronyms and abbreviations: several terms, acronyms and abbreviations, used in literature, including patents, journal papers, conference publications, books, published 20 standards and reports have the same and/or similar meaning as in the present application. In particular, terms acronyms and abbreviations, used in the prior art Feher et al. patents: U.S 22 pat. 6,470,055 (the '055 patent), U.S pat. 6,665,348, U.S. pat. 6,757,334, U.S pat. 4,567,602 and U.S pat. 5,491,457 are often used in this document. To facilitate comprehension of some 24 of the terms used in the prior art literature, parts of the prior art '055 patent are reviewed in this application. For other prior art terms, acronyms and abbreviations described in the cited 26 references, the references contained in the cited references and other prior art material are applicable. 28 Position determining devices (PDD), also designated as position determining entities (PDE) and position determining transmitters mean devices and transmitters which generate and 30 transmit signals used by receivers and receive processors for location or position determination and/or location or position estimation have been also described in the prior art. 14 Exemplary prior art single-chamber pacemaker and/or dual-chamber pacemaker and 2 implantable cardiac stimulation devices are described in exemplary cited U.S. pat. 6,539,253 and in U.S. pat 6,907,291. 4 SUMMARY OF THE INVENTION 6 According to one aspect of the present invention, there is provided a position finder and communication system including: 8 a first processor for receiving and processing multiple signals received from multiple locations and for generating from said received signals a processed position finder signal; 10 a second processor, including a first cross-correlator and a transmit baseband filter, for generating cross-correlated in-phase and quadrature-phase processed filtered baseband 12 signals from an input signal; a third processor, including a spread spectrum processor and a second cross-correlator, 14 for generating cross-correlated in-phase and quadrature-phase processed spread spectrum signals; 16 a fourth processor including an orthogonal frequency division processor for generating a orthogonal frequency division processed signal; 18 a fifth processor for generating a signal from a processing of the processed position finder signal generated by the first processor, with one or more of the signals generated by 20 the second, third and fourth processors; a quadrature modulator for quadrature modulation of the signal generated by the fifth 22 processor; and a transmitter for transmission of the quadrature modulated signal. 24 The system may further include a receiver and demodulator for receiving and 26 demodulating a modulated signal. 28 Said multiple signals received may be received from two or more satellite transmitters and from two or more land based transmitters, wherein said received signals from satellite 30 transmitters may be received in different radio frequency bands than said signals received from land based transmitters. 15 2 Said spread spectrum processor and second cross-correlator may include a code division multiple access processor and filter for providing code division multiple access cross 4 correlated in-phase and quadrature-phase filtered signals having a different modulation format and different bit rate than the modulation format and the bit rate of said second 6 processor generated cross-correlated in-phase and quadrature-phase processed filtered baseband signals. 8 Said orthogonal frequency division processed signal may be an Orthogonal Frequency 10 Division Multiplexed or Orthogonal Frequency Division Multiple Access processed voice or video signal. 12 Said transmitter for transmission of the quadrature modulated signal may include a first 14 amplifier operated in a first radio frequency (RF) band in a linearly amplified (LINA) mode and a second amplifier operated in a second radio frequency (RF) band, wherein the second 16 RF band may be different from the first RF band and said second amplifier may be operated in a non-linearly amplified (NLA) mode. 18 Said cross-correlated in-phase and quadrature-phase processed filtered baseband signals 20 and said cross-correlated in-phase and quadrature-phase processed spread spectrum signals may be used in a cellular communication system and said orthogonal frequency division 22 processed signal may be used in a wireless local area network, wherein said cellular communication system and said wireless local area network may be distinct communication 24 systems and networks. 26 Said first cross-correlator generates cross-correlated in-phase and quadrature-phase processed baseband signals may be such that when the in-phase signal has its maximum 28 amplitude, the quadrature-phase signal has zero value and when the in-phase signal has a local maximum the quadrature-phase signal has a local minimum. 30 16 Said orthogonal frequency division processor for providing a orthogonal frequency 2 division processed signal may include a wired multimode communication connector for receiving a processed video signal from a wire, cable, or fiber optic communication 4 connected internet system. 6 The system may further include a receiver and demodulator for receiving and demodulating a modulated signal, wherein said receiver and demodulator may include an 8 antenna array of four or more antennas for receiving said modulated signal and a receive baseband filter for receiving and filtering the demodulated signal and for providing cross 10 correlated in-phase and quadrature-phase filtered baseband signals wherein said receive baseband filter may be mis-matched to said transmit baseband filter. 12 BRIEF DESCRIPTION OF THE FIGURES 14 Fig. I shows implementation structures for single and or multiple communications systems, including single and or multiple location or position finder systems, Radio 16 Frequency Identification Devices (RFID), medical diagnostics, emergency and remote control systems. 18 Fig. 2 is a structure of a multi mode location and multi-mode communication system, including wireless, wired (or cabled) and internet - web based connections with single or 20 multiple communication links and or communication transceivers (T/R) and or communication and control units. 22 Fig. 3 is a structure of a system having single or a plurality of selectable Position Determining Entity (PDE), Base Station Controller (BSC), Terminal (Subscriber Unit) Base 24 Station Transceiver Subsystem (BTS) devices. Fig. 4 shows embodiments and structures for systems and networks containing Multiple 26 Position Determining Entity (PDE), Base Station Controller (BSC) units, Terminal or Subscriber Unit (SU) and Base Station Transceiver Subsystem (BTS) units. 28 Fig. 5 represents implementation architectures and structures for single or multiple receiver and single or multiple transmitter signals, including location or position finder 30 signals, from one or more antennas. 17 Please note that pages 19 to 21 have been intentionally omitted. 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 18 WO 2007/018566 PCT/US2005/035931 Fig. 6 is represents a generic prior art transmitter and receiver (transceiver or T/R), 2 disclosed in Feher' s U.S. Pat.6,665,348 (the'348 patent). Fig.7 shows prior art cross-correlated signals, and in particular in-phase (I) and 4 quadrature-phase (Q) signal patterns-displayed in the time domain. Fig.8 presents prior art measured cross-correlated in-phase (I) and quadrature-phase 6 (Q) baseband signals of a GMSK modulator, with BTb=0.3, specified for GSM systems. FIG. 9 shows Quadrature and Non Quadrature Architectures with one or more 8 processors, and or single or multiple modulators and antennas. Fig.10 is a multiple BRA and MFS transmitter architecture with one or more 10 processors, modulators and amplifiers, antennas and interface connection(s) to wired or cabled or other transmission media. 12 Fig.11a is a new implementation architecture and block diagram of a multiple communication link, also designated as a cascaded link, or a system having cascaded 14 units which inter operate in a sequence for multimode operated wireless and or wired and internet systems including fixed location systems and mobile systems. 16 Fig.1Ib shows an exemplary prior art quadrature modulator. Fig.12 is an embodiment of an RF head end (alternatively designated as RF subsystem 18 or RF part) which is co-located with the baseband and or Intermediate Frequency(IF) processing units, or is at a remote location. 20 Fig. 13 represents an alternative embodiment of a multi mode BRA and MFS system connected to single or multitude of wireless, wired, cabled or fiber optic communication 22 (FOC) connected and or internet or mobile internet web based systems. FIG. 14 is an embodiment of a multi-mode, multi bit rate system, with BRA, MFS and 24 code selectable OFDM, WCDMA, Wi-Fi, Wi-Max, WLAN, infrared, Bluetooth and or other spread spectrum or continuous data systems. 26 Fig. 15 is an adaptive Radio Frequency (RF) wave generator, RF processor, radio and modulator structure. 28 Fig. 16 is a multimode, multipurpose system embodiment for numerous applications, including signal processing and storage, medical diagnostics, broadcasting entertainment, 30 educational and alarm system for seamless adaptive communications, emergency reporting, location finding and remote control embodiments. 22 WO 2007/018566 PCT/US2005/035931 Fig. 17a is a Non-quadrature(non-QUAD) and quadrature modulation (Quad Mod or 2 QUAD mod) multiple modulator embodiment, including polar modulator structures. Fig. 17b shows a polar (non Quadrature) exemplary prior art modulator 4 implementation block diagram. Fig. 17c a Non-Quadrature (non-QUAD) exemplary prior art modulator architecture 6 is illustrated. Fig. 18 represents multi-mode location receiver connections to multi-mode or to single 8 mode wireless transmitters. Fig. 19 is a Software Defined Radio (SDR), Multiple SDR (MSDR) and Hybrid 10 Defined Radio (HDR) transmitter and receiver embodiment, with single or multiple processors, single and or multiple RF amplifiers and antennas and single or multiple 12 SDR and or non-SDR implementation architectures. Fig. 20 shows interface and or processor units, set of modulators, amplifiers, selection 14 devices and or combiner devices which provide RF signals to the transmission medium. Fig. 21 is an embodiment of a single or multiple transmitter architecture using single 16 or multiple transmitters; the multiple transmitter implementations are also designated as a diversity transmitter. 18 Fig.22 shows a Multiple Input Multiple Output (MIMO) system. Fig. 23 is a Single Input Multiple Output (SIMO), Multiple Input Multiple Output 20 (MIMO), and or Multiple Input Single Output (MISO) embodiment having one or multiple RF interface points and or one or multitude of antennas. 22 Fig. 24 represents an antenna array implementing Multiple Input Multiple Output (MIMO) and or Single Input Multiple Output (SIMO) and or Multiple Input Single 24 Output (MISO) communication, position finding and broadcasting transmission-reception system, including transmit antenna diversity and receive antenna diversity systems. 26 Fig. 25 shows Software Defined Radio (SDR) and Hybrid Defined Radio (HDR) systems for Multiple Input Multiple Output (MIMO) and or Single Input Multiple Output 28 (SIMO) and or Multiple Input Single Output (MISO), including diversity systems. Fig. 26 is an information monitoring processing and communication system. This 30 system in certain application includes a patient monitor and diagnostic system. Fig. 27 depicts a Universal System including one or multiple Remote Control or 23 WO 2007/018566 PCT/US2005/035931 Universal Remote Control(URC) devices, including wired or wireless devices. 2 Fig. 28 shows a test and measurement instrumentation system within a wireless multi mode system. 4 Fig. 29 is an implementation architecture of single or multiple cellular phones, or of other mobile devices, communicating with single or multiple Base Station Transceiver 6 (BST) having single or plurality of antennas. Fig. 30 represents an implantable cardiac stimulation device, a heart and a block 8 diagram of a single -chamber and or a dual-chamber pacemaker with single or multiple wireless communications and control systems. 10 DETAILED DESCRIPTION OF THE INVENTION AND OF THE PREFERRED 12 EMBODIMENTS In this section, the present invention is more fully described with reference to the 14 accompanying drawings in which preferred embodiments of the invention are shown. This invention may, however, be embodied in many different forms and should not be 16 construed as limited to the illustrated embodiments set forth herein. Rather, these embodiments are provided so that this disclosure will be thorough and complete, and will 18 fully convey the scope of the invention to those skilled in the art. One or more devices (alternatively designated as units, elements, systems, terminals, 20 devices, leads or connections) are optional in the embodiments. The elements may be interconnected and or used in various configurations. In the figures and relevant 22 descriptions of the figures, as well as in the specifications of this disclosure, some of the units or elements are optional and are not required for certain applications, embodiments 24 and or structures. In this document the term "signal" has the most generic meaning used in the prior art and includes electrical, acoustical, infrared , X-ray, fiber optics, light 26 sound, position, altitude ,diagnostics, beat, density, and other sensor or device or human being or animal or object generated or processed waveforms, images, pictures, symbols , 28 wavelets, wave shapes and analog or digital or "hybrid" analog and digital signals. Fig.1 shows implementation structures for single and or multiple communications 30 systems, including single and or multiple location or position finder systems, Radio Frequency Identification Devices(RFID), medical diagnostics, emergency 24 WO 2007/018566 PCT/US2005/035931 communication and remote control systems connected with single or multiple Bit Rate 2 Agile (BRA) , and single modulation or Modulation Format Selectable (MFS) cellular, other mobile wireless, satellite and/or land based devices for Global Mobile System 4 (GSM), General Packet Radio Service (GPRS), Enhanced Digital GSM Evolution (EDGE), or Evolution of GSM (E-GSM) , Code Division Multiple Access (CDMA), 6 Wideband Code Division Multiple Access (WCDMA or W-CDMA), Orthogonal Frequency Division Multiple Access (OFDM), Time Division Multiple Access (TDMA), 8 IEEE 802.xx, Digital European Cordless Telecommunication (DECT) , Infrared (IR), Wireless Fidelity (Wi-Fi), Bluetooth, and other standardized as well as non-standardized 10 systems . In particular, Fig. 1 is an embodiment of interface units, processors, transmitters and receivers (also designated as transceivers or TR), single or multiple communication 12 and or broadcast devices, location finder, location, position finder and tracking devices and processors, connected through selectors or combiners with single or multiple 14 transceivers, communication systems entertainment devices, educational systems and or medical devices, e. g. patient monitor devices and or sensors connected to one or more 16 communication systems. Interface Unit 1.1 is a device or part of a of a communication system and or part of location finder or location tracking or location positioning system 18 or processor, for example part of a Global Positioning System (GPS) receiver or an interface to a GPS receiver or other location finder or tracking device or a sensor, signal 20 detector and processor of acoustic (e.g. voice, sound, music) signals, video and/or visual and/or image signals (moving video, still photographs, X-Ray pictures, telemetry 22 signals) , temperature (e.g. human body temperature, animal's body temperature, temperature of an object ), electrical signal, Radio Frequency Identification Devices 24 (RFID) received or generated signal, infrared , X-ray and or of other signals , parameters generated by sensors or obtained from any other sources. Unit 1.1 may 26 contain sensors for heart beat, strength, pulse rate, glucose, arterial blood gas sensors, insulin sensors or monitors and or other medical devices. Unit 1.1 may also contain 28 sensors and medical apparatus or devices connected to a patient during a surgery, or post surgery for patient monitoring. Unit 1.1 may contain only one of the mentioned elements, 30 or more of the aforementioned elements. Unit 1.1 may contain certain combinations and/or variations of the devices described in this section. In some other embodiments 25 WO 2007/018566 PCT/US2005/035931 Unit 1.1 is a simple interface unit to connect signals from a signal source and or from 2 multiple sources to and or from the communication medium. The term "signal source" or "source" includes a broad class of signal sources, signal processors and or signal 4 generators, including speech, audio, video, picture, display, data storage, information processors and other devices which generate, contain or process signals. Implementation 6 of interface Unit 1.1 consists of a connection device (such as a wire or cable or part of circuit or connection to an antenna or an electronic or acoustical or infrared or laser 8 coupler or connector, or an electronic or electrical circuit) or a combination of one or more devices. Interface Unit 1.1 may be a simple interface for video or television(TV), or 10 digital camera (digital photo camera or digicam) signals or interface unit for a sequence of images or other visual signals such as photographs, scanned images or processors or 12 devices of visual signals and or stored and programmable music-such as contained in prior art portable music players or integrated prior art MP3 players, with or without prior 14 art Windows Mobile smart-phone software, computer, entertainment, games, interactive video games with or without location finders, location finders with or without radio 16 FM/AM or digital radio or other radio or television broadcast signals. In one of the implementations Unit 1.1 contains the web or WEB or the World Wide Web, shortly web 18 or www, Mobile Web access from mobile devices. Unit 1.1 contains in some of the embodiments a push to talk(PTT) processor. The signal or plurality of different type of 20 signals is connected to oneor more transceivers (TR) contained in Unit 1.2. The term transceiver refers to one or multiple transmitters and receivers and also to one or multiple 22 receivers and transmitters. Specifically, the TR, Unit 1.2 may include one or multiple entire transceivers or could consist of one or multiple receivers or one or multiple 24 transmitters. Unit 1.2 (also designated as Element 1.2 or Device 1.2) could be one or multiple Bluetooth (BT), infrared (IR), other wireless, e.g. satellite or cable, or wired 26 transceiver(s), or part of a transceiver(s). Unit 1.3 is a signal splitter or signal selector device or connection which selects or combines and connects the Element 1.2 provided 28 signals (one or more signals) to one or more communication systems or subsystems contained in communicator devices Unit 1.4, Unit 1.5, and Unit 1.6. The communicator 30 devices Unit 1.4, Unit 1.5, and Unit 1.6 are parts or entire GSM, CDMA or Wireless Local Area Network (WLAN) or other wired, cabled or wireless devices respectively. 26 WO 2007/018566 PCT/US2005/035931 Systems components in Unit 1.6 , designated as "OFDM or other", are assembled in one 2 or more combinations and variations , also known as "plug and play" and are for operation in single or multiple standardized systems , e.g. GSM, General Packet Radio 4 Service (GPRS), Enhanced Digital GSM Evolution (EDGE), or Evolution of GSM (E GSM) , Code Division Multiple Access (CDMA), Wideband Code Division Multiple 6 Access (WCDMA or W-CDMA), Orthogonal Frequency Division Multiple Access (OFDM), Time Division Multiple Access (TDMA) , IEEE 802.xx, Digital European 8 Cordless Telecommunication (DECT), Infrared (IR), Wireless Fidelity (Wi-Fi), Bluetooth, and other standardized as well as non-standardized systems. One or more of 10 the Fig. 1 components could be Modulation Format Selectable (MFS) and or Bit Rate Agile (BRA) systems. Signal selector or signal combiner Unit 1.7 provides the selected 12 or combined signals to one or plurality antennas, shown as Unit 1.8a or other signal interface units which provide the selected or combined signals to the wireless or wired, or 14 cabled, or internet medium, such as web (or WEB) or www, represented by Unit 1.8b. Single or plurality of signals are received on single or multiple antennas 1.1la and or on 16 single or multiple interface points 1.11 b and are provided to Splitter or switch Unit 1.12 for connecting one or more of the received signal(s) to communication devices, Unit 18 1.13, Unit 1.14, and /or Unit 1.15, respectively. Unit 1.15 is the receiver section of the transmitted signals of Unit 1.6, designated as OFDM or other. In other embodiments Unit 20 1.15 is receiver section of other signals, such as OFDM, infrared, WI-Fi, TDMA, FDMA, telemetry WLAN, WMAN, GSM, CDMA, WCDMA, or other signals or a combination 22 of one or more of such signals. Signal selector or signal combiner Unit 1.16, provides one or multiple signals to interface or processor Unit 1.17. In some of the 24 implementations, structures and architectures Units 1.6 and Unit 1.15 contain one or more of the following devices: interface devices, processors, modulators, demodulators, 26 transmitters, receivers, splitters, combiners for one or more of OFDM, infrared, Bluetooth, Wi-Fi, TDMA, FDMA, FDM, telemetry, RFID, WLAN, MLAN, cellular 28 systems, cable, wireless web ,wireless internet or other wired or internet systems. In the transmitter part ,shown in the upper part of Fig.1, and also in the receiver part, 30 illustrated in the lower part of Fig.1, the selection or combing of signals is under the control of processors and or programs and/or manual control. The selection or combing 27 WO 2007/018566 PCT/US2005/035931 of signals is not shown in Fig.1. Interface and or processor Unit 1.17 interfaces to and or 2 processes one or more of the received signals and may provide control signals to the receiver and also to the transmitter. Block arrows Unit 1.9 and Unit 1.10 designate signal 4 and control path and or physical connections for processing and /or control of parts of the elements shown in Fig.1 . 6 Fig.2 is a structure of a multi mode location and multi-mode communication system, including wireless, wired (or cabled) and internet -web based connections with single or 8 multiple communication links and or communication transceivers (T/R) and or communication and control units. One or more antennas Unit 2.1, Unit 2.2, Unit 2.3 and 10 Unit 2.4, transmit or receive one or more signals. On block arrow Unit 2.5 one or more other signals are connected to the or from the single or multiple transceivers. Unit 2.6 is 12 an interface unit or single or multiple transceivers connected to the signal transmission or signal reception medium. The signals from or to Unit 2.6 are connected with the single or 14 multiple communication link, Unit 2.8. Interface Unit 2.17 through connections 2.16, 2.18, 2.19, 2.20, 2.21 and communication and control Unit 2.10 process signals and 16 provide communication and control signals from and or to antenna Units 2.11, 2.12, 2.13, 2.14, interface Unit 2.15, interface connection Unit 2.17, antenna Units 2.1, 2.2, 2.3, 18 2.4 and interface connection Unit 2.5. All antenna units and connections 2.5 and connections 2.15 may provide duplex (bi directional) signal transfers. Units 2.6 and 2.8 20 are in "cascade", i.e. they are connected to each other in a sequence. Communication and Control Unit 2.10 may also operate in cascade with one or more of Unit 2.6 or 2.8. In 22 other embodiments, one or more of the units, shown in Fig.2, are connected in parallel or a star or mesh network, or other configurations. 24 Fig.3 is a structure of a system having single or a plurality of selectable Position Determining Entity (PDE), Base Station Controller (BSC), Terminal (Subscriber Unit) 26 Base Station Transceiver Subsystem (BTS) devices. While the cited prior art, such as Riley's US pat 6,865,395, Ref. 8, Qualcomm CDMA Technologies' MSM 6275 and 28 Qualcomm CDMA Technologies' MSM 6300 chipset solution Ref. 65 and Ref. 66 disclose system and network operations of PDE, BSC, BTS and subscriber units, the 30 prior art does not disclose nor anticipate the structures and connections of multi-mode, multi-purpose MFS systems operated in cascaded and or parallel, star or mesh 28 WO 2007/018566 PCT/US2005/035931 configurations, selectable single or multiple single structures such as disclosed and 2 claimed in this application. The term cascaded or cascade refers to units or devices operated in a sequence or in parallel with each other. FIG. 3 includes processing of 4 Receiver or Location Finder Signals, e.g. GPS signals and or land line and or web internet information signals and it includes Transmit Section of Multiple Communicator 6 Devices. Elements (also designated as Units or Devices) 3.8, 3.9, 3.11, 3.14, 3.16 and 3.18 are single or multiple antennas which receive and or transmit signals from to a 8 Position Determining Entity (PDE) transmitter or to one or more Base Station Transceivers (BTS) devices and/or to subscriber units, including peer to peer direct 10 communication between subscribers. In some of the implementations transmitters of PDE signals include one or more satellite systems, such as GPS satellites, cellular base 12 stations, wireless base stations or other wireless transmitters such as cellular phones PDA wireless transmitters, Remote Control (RC) transmitters, infrared or any other 14 transmitters. Units 3.1 and 3.3 are interface units and or front end ports respectively, for reception of the PDE signals from the antennas, from infrared transmitters, from laser 16 transmitters and or from wired connections or from the internet. Wired connections include fiber optics, copper, cable and any other connection. In some embodiments the 18 Position Determining Entity (PDE) front end is a Remote Front end while in other cases it is co-located with the entire receiver. Units 3.2 and 3.4 are one or a plurality of Base 20 Station Controller (BSC) units, designated as units BSC-1 to BSC-N. The BSC units control signals of the Base Station Transceiver Subsystem (BTS) units 3.7, 3.10, 3.12, 22 3.13, 3.15 and 3.17. Signal reception and or signal processing and or signal transmission by the antenna units or sets of antenna units 3.8 , 3.9, 3.11, 3.14, 3.16 and or 3.18 is 24 controlled by one or more BSC units or by controller devices located in the Base Station Transceivers (BTS), or by control devices located outside of these units. 26 Fig. 4 shows embodiments and structures for systems and networks containing Multiple Position Determining Entity (PDE), also designated as Position Determining 28 Device (PDD), location tracker, location finder or position finder devices, Base Station Controller (BSC) units and Terminal or Subscriber Unit (SU) Base Station Transceiver 30 Subsystem (BTS) units. Remote Control (RC), Universal Remote Control (URC), wireless, wired, cabled , internet, web based communication systems and communicator 29 WO 2007/018566 PCT/US2005/035931 devices, radio frequency identification (RFID) systems with single or plurality of devices, 2 emergency and other alarm systems, medical patient monitor-sensor devices, diagnostics units and systems, Deoxyribose Nucleic Acid (DNA) systems, fingerprint identification, 4 fingerprint control and or using DNA samples for interactive communication or control of certain communications and control systems and systems having push to talk (PTT) 6 options are included in some of the embodiments. Each unit may contain interface unit and or processor unit, memory, communication port, single or multiple modulator or 8 transmitter(s) and single or multiple receivers and or demodulators with or without single or multiple switching selection devices and /or signal combining and splitting devices. 10 Communications , telematics, telemetry, video broadcasting and or point to point video transmission, transmission of audio and or data and or video to mobile units is embodied 12 by the implementation of single or multiple Bit Rate Agile (BRA) , and single modulation format and or multimode Modulation Format Selectable (MFS), single bit 14 rate and or multiple bit rate and or Bit Rate Agile(BRA) systems , such as enhanced performance or new features, new applications and new embodiment based GSM, 16 General Packet Radio Service (GPRS), Enhanced Digital GSM Evolution (EDGE), or Evolution of GSM (E-GSM), Code Division Multiple Access (CDMA), Wideband Code 18 Division Multiple Access (WCDMA or W-CDMA), Orthogonal Frequency Division Multiple Access (OFDM), Time Division Multiple Access (TDMA) , IEEE 802.xx, 20 Digital European Cordless Telecommunication (DECT) , Infrared (IR), Wireless Fidelity (Wi-Fi), Bluetooth, and other standardized as well as non-standardized systems, 22 disclosed in this application. Units 4.1, 4.3 and 4.5 contain single or Multiple Position Determining Entity (PDE) devices, while Units 4.2, 4.4 and 4.6 are single or multiple 24 BTS devices. Units 4.7, 4.8 and 4.9 are single or multiple transmit and or receive or transmit /receive antennas embodied as single band or multiple band antenna systems. 26 Units 4.14, 4.16 and 4.18 are terminals, also designated as subscriber units (SU). In certain implementations the SU contain the PDE or position finder or location finder or 28 location tracker unit, or RFID units. The BTS devices or BTS units communicate directly with the SC devices(units); in other applications some SC units communicate 30 with other SC units without the use of BTS devices (also designated as BTS units). Block arrows 4.10, 4.11 and 4.12 show communication links between BTS, PDE and SC 30 WO 2007/018566 PCT/US2005/035931 units and combinations of units, without the need to have all units in the network. 2 Fig. 5 represents implementation architectures and structures for single or multiple receiver and single or multiple transmitter signals, including location or position finder 4 signals, e.g. wireless signals, cellular signals, GPS signals received from one or more satellites or from one or more ground (terrestrial) based single or plurality of antennas, 6 Units 5.1, 5.2, 5.3, 5.15 and 5.16 or land line or world wide web (www) signals received by connections or interface units 5.4 and 5.14 which interface and or receive signals from 8 Transmit Section of Multiple Communicator Devices. Multiple Position Determining Entity (MPDE) is also designated as Position Determining Device(PDD). The Position 10 Determining Entity (PDE) ports/units 5.5 and 5.17 , in certain cases are part of the entire receivers while in other cases are implemented at separate locations from other parts of 12 the receivers and designated as remote RF front ends. In addition to the PDE ports, other units of the receiver are located at remote locations, from the subsequent parts of the 14 receivers. Units 5.1 to 5.23 constitute parts of two receivers. Each unit is optional and not all units are required for the operation of the system. Units 5.6 and 5.18 are Band 16 Pass Filter (BPF), Units 5.7 and 5.19 are amplifiers, Units 5.8 and 5.20 are signal multipliers (also known as mixers) for signal down conversion and Units 5.9 and 5.21 are 18 frequency synthesizers or oscillators which provide signals to the mixers. Units 5.10, 5.22 and 5.11, 5.23 are demodulators and signal processors which provide, through an 20 optional signal combiner or signal selector, Unit 5.12, demodulated and processed single or multiple output signals to connection lead 5.13. In direct radio frequency (RF ) to 22 baseband conversion receivers, or any other direct conversion receivers, including certain Software Defined Radio (SDR) implementations several aforementioned units are not 24 used in the implementations. Units 5.24 to 5.40 are elements or devices of single or plurality of transmit sections of one or more transmitters of one or more communicator 26 devices. Software Defined Radio (SDR) systems concepts, principles, SDR architectures and SDR technologies have been described in the prior art, including in the cited 28 reference book Tuttlebee , W. :"Software Defined Radio: Baseband Technology for 3G Handsets and Basestations" , John Wiley & Sons, Ltd. , Chichester, England, ISBN 0 30 470-86770-1 , Copyright 2004. On single or multiple input connections or leads 5.24 single or multiple signals are received from one or more input signal sources, signal 31 WO 2007/018566 PCT/US2005/035931 processors, sensors, detection devices or other systems; these input signals or signal 2 sources include one or more of the following signals obtained from: Video to mobile video transmitters, Video over Internet Protocol (ViIP), Voice over Internet Protocol 4 (VoIP), wireless systems including GSM, GPRS, TDMA,WCDMA,CDMA, W-CDMA, Orthogonal Frequency Division Multiple Access (OFDM), infrared (IR), Bluetooth, Wi 6 Fi, wired systems , cable connected systems and or a combination of wired/wireless and or internet web based systems , including mobile web , or mobile internet based systems. 8 The signal or signals on connection lead 5.24, in certain implementations of Fig. 5, consist of one or more of the following signals, further also shown in Fig.16 as elements 10 16.1 to 16.13 and 16.15: location tracker Unit 16.1, remote control (RC) or universal remote control (URC) Unit 16.2, video, digital video or video game Unit 16.3, digital 12 camera, photo camera, scanner X-ray or any other image Unit 16.4, emergency or alarm signals or detector signals or diagnosis signals (such as obtained from medical sensors or 14 devices) Unit 16.5, voice, music , recorded/stored music, sound recording , dictation recorded signals Unit 16.6, telemetry and /or diagnostics telemetry or space telemetry or 16. other telemetry or telematics signals Unit 16.7, fingerprint or other personal identification and/or other signals, such as Deoxyribose nucleic acid (DNA) information 18 and/or generated or obtained or processed signals from DNA samples. In this application the term DNA refers to customary prior art dictionary definitions of DNA such as: 20 Deoxyribose nucleic acid (DNA) is a nucleic acid that contains the genetic instructions specifying the biological development of all cellular forms of life (and many viruses).In 22 this application the term DNA refers also to more generic DNA definitions and to generic medical diagnostics and diagnostics obtained and related audible, visual, blood 24 pressure, temperature, density , motion, and other diagnostics signals. In the lower part of Fig.5, Unit 5.25, is a splitter or selector or combiner device. The terms splitter, selector 26 and combiner device or unit mean that each of these terms describes devices which split or select or combine one or more input signals, process these signals and provide one or 28 more output signals. On single or multiple connection lead or leads 5.26 a signal or multiple signals are provided toUnit 5.28 the input interface unit of the first ( 1 ') 30 processor and or first transmitter path. On single or multiple connection lead or leads 5.27 a signal or multiple signals are provided to Unit 5.29 the input interface unit of the 32 WO 2007/018566 PCT/US2005/035931 second ( 2 "") processor and or second transmitter path. Input interface Unit 5.28 and 2 interface Unit 5.29 provide signals to one or more single or multiple modulator Units 5.30 and 5.31. The modulated output signals of these units are provided to one or more 4 amplifiers, Unit 5.32a and or 5.32b to optional filters 5.33 and 5.34, to subsequent amplifiers 5.35 and or 5.36 and to antennas 5.37 and or 5.39 and or to the wired or cabled 6 or infrared transmission media on connection leads 5.38 and or 5.40. One or more of the mentioned amplifiers are operated in linearly amplified or linearized amplification mode 8 and or in Non-Linearly Amplified (NLA) mode. While Fig. 5 shows two signal path (in the upper part of the figure) and two signal path (in the lower part of the figure), 10 implementations have single and multiple mode signal path applications, including one or two or three or more signal paths.In some embodiments single selected signals are 12 transmitted, while in other empbodiments of this invention multiple signals are transmitted. In Fig. 5 one of the implementation structures has multiple traransmitter path, 14 connected to a single antenna 5.42. In some embodiments the amplified signal or the amplified signals are connected by a switch or selector or combiner 5.41 to antenna Unit 16 5.42. Antenna Unit 5.42 may consist of a single antenna or multiple antennas. Fig. 6 is represents a generic prior art transmitter receiver (transceiver or T/R), taken 18 from prior art Fig. 6 of Feher' s U.S. Pat.6,665,348 (the'348 patent), Ref. [42]. Since several terms used in the '348 patent and in the current application have the same and/or 20 similar meaning as in the prior art and to facilitate reading of the current application, without the need to repeatedly refer to the '348 patent, in the following paragraphs 22 pertinent highlights and or additional explanations of the prior art Fig. 6, of the '348 patent, within the context of this application, are presented. In Fig. 6 of the current 24 application (which is taken from Fig. 6, of the prior art '348 patent) an implementation diagram with cascaded switched transmit (Tx) and receive (Rx) Low-Pass-Filters (LPF) 26 in conjunction with cross-correlated and other non cross-correlated Time Constrained (TCS) waveform and cascaded Long Response(LR) filters or LR processors is shown. 28 The terms cross-correlated or cross-correlation (abbreviated also as CC, or CCOR or Xcor) and cross-correlated have the descriptions, definitions and meanings as described 30 in the cited prior art including Feher et al. U.S. Patents: 4,567,602; 5,491,457; 5,784,402; 6,445,749; 6,470,055; 6,665,348; 6,757,334 and in the book Feher, K.: "Wireless Digital 33 WO 2007/018566 PCT/US2005/035931 Communications: Modulation & Spread Spectrum Applications", Prentice Hall PTR, 2 Upper Saddle River, NJ 07458, Copyright 1995, Book ISBN No:0-13-098617-8. In general cross-correlated signals or cross-correlated waveforms means that signals (or 4 waveforms) are related to each other. More specifically, the term "cross-correlating" means "processing signals to generate related output signals in the in-phase (I) and in the 6 quadrature-phase (Q) channels". Related to description of Fig.7, Fig.8 and Fig.9 it is noted that if a signal is split into two signal path or two signal channels and the signals in 8 the two channels are the same, or practically the same, then the signals in the two channels are related thus, are cross-correlated. The term "cascade" or " cascaded" 10 means that the signal flow or signal connection between filters or units is in a sequence, such as serial signal flow between filters , processors or units, or the signal flow or signal 12 path is simultaneous or parallel between multiple units. In Fig. 6 the LR filters or LR processors could be implemented as separate in-phase (I) and quadrature -phase (Q) LPF 14 s or as an individual time-shared LPF. The transmit Baseband Signal Processor (BBP) including the I and Q LPF s could be implemented by digital techniques and followed by 16 D/A converters or by means of analog implementations or a mixture of digital and analog components. In certain embodiments only one signal path is present, that is there are no 18 separate I and Q signal channels. Certain architectures use Bit Rate Agile(BRA), Modulation Format Selectable(MFS), modulation and demodulation filters have been 20 implemented and tested with intentionally Mis-Matched (MM) filter parameters. Some of the implementations use Agile(Bit rate Agile or BRA) Cascaded Mis-Matched (ACM) 22 architectures. The term Bit rate Agile or BRA refers to systems in which the bit rate is tunable, selectable or changeable. The LR filter units, embodied by the first and second 24 sets of I and Q are implemented as LPF s or alternately as of other types of filters such as Band-Pass Filters (BPF) or High Pass Filters (HPF) or other filter/processor LR filter 26 combinations. For several embodiments all of the aforementioned processors, filters and modulators, demodulators(modems) are BRA, MFS and ACM, while for other 28 implementations bit rate agility and or ACM or MFS implementations may not be required. Unit 6.17 is an amplifier that could be operated in a linear (LIN) or in a NLA 30 mode. The output of amplifier unit 6.17 is provided on lead 6.18 to the transmission medium. In some of the embodiments and structures the units in only one of the signal 34 WO 2007/018566 PCT/US2005/035931 channels, e.g. the channel designated as the Q channel are implemented while in the other 2 channel, designated as I channel the components are not used. In yet another set of embodiments only the baseband processor part is implemented. In Fig. 6 at the receiving 4 end, on lead 6.19, is the modulated received signal. Unit 6.21 is a BPF that is present in some embodiments while in others it is not required. A more detailed description of 6 Units 6.1 to 6.35 and embodiments and operation is contained in Feher's U.S. pat. 6,665,348 (the '348 patent). 8 Fig.7 contains prior art cross-correlated signals, and in particular in-phase (I) and quadrature-phase (Q) signal patterns-displayed in the time domain. This figure is taken 10 from a prior art cited book, Feher, K.: "Wireless Digital Communications: Modulation & Spread Spectrum Applications". Note that the displayed amplitude patterns (amplitude as 12 a function of time) of the upper signal (designated as I signal) and of the lower signal (designated as Q signal) are related, that is these signals are cross-correlated. This 14 relation or cross-correlation property of the I and Q signals (upper and lower signals) is noted in Fig.7, for example, whenever the upper signal (I signal) has its maximum 16 amplitude, the lower signal (Q signal) has zero value and when the upper signal has a local maximum the lower signal has a local minimum. The term zero means zero or 18 approximately zero, while the terms maximum and minimum mean maximum and minimum or approximately maximum and approximately minimum. 20 Fig.8 shows prior art measured cross-correlated signals on a sample Integrated Circuit (chip), manufactured by Philips and designated as the PCD-5071 chip. The Philips PCD 22 5071chips was manufactured for use in GSM systems for generation of GSM system recommended /specified GMSK modulation signals. This Fig. 8 is taken from the prior 24 art cited book Feher, K.: "Wireless Digital Communications: Modulation & Spread Spectrum Applications", Prentice Hall PTR, Upper Saddle River, NJ 07458, Copyright 26 1995, Book ISBN No: 0-13-098617-8. The measured signal time patterns (or waveform) in the upper channel (designated as I signal) and in the lower channel (designated as Q 28 signal) are related, i.e. they are cross-correlated. This cross-correlation or relation property between the upper and lower signals is evident, for example, whenever the 30 upper signal (I signal) has its maximum amplitude, the lower signal (Q signal) has zero value. 35 WO 2007/018566 PCT/US2005/035931 Fig.9 shows in the upper part of the figure one or multiple signals, connected on lead 2 9.1 to an interface unit 9.2 or processor unit 9.2. Interface and or processor 9.2 provides single or multiple signals on single or multiple leads 9.3 and or single or multiple leads 4 9.4 to one or more modulators. Unit 9.5 contains one or more non-quadrature modulation implementation structures such as prior art FM modulators and or polar modulators or 6 other non quadrature modulators. Non quadrature modulators are modulators which have structures and implementations which are different from the quadrature(QUAD) 8 implementation structures. Unit 9.6 contains one or a plurality processors and modulators which have a quadrature(QUAD) implementation structure. Modulators 10 having quadrature structure have base band in-phase(I) signals baseband quadrature phase(Q) signals connected to the inputs of the Quadrature modulators. An illustrative 12 embodiment of a quadrature modulator structure is shown in Fig.6. A prior art non quadrature modulator embodiment is shown in the lower part of Fig.13. Non-quadrature 14 modulators are described in numerous prior art references; these are designated as FM modulators, FSK modulators, BPSK modulators or by similar and or related names and 16 acronyms. Units 9.7, 9.8, 9.9 and 9.10 provide transmission processing functions such as filtering, up-conversion, and linear (LIN) or NLA signal amplification. In the lower part 18 of Fig. 9, an input signal on connection 9.11, and connection of the 9.11 input signal to signal lead 9.12 and to signal lead 9.13 is shown. In one of the embodiments, the same 20 input signal is provided (split or by the splitter) to the I channel, on connection 9.12, and to the Q channel on connection 9.13. Thus, the signals on connection leads 9.12 and 9.13, 22 designated as I and Q signals, in this implementation architecture, are the same or are practically the same, thus they are related or cross-correlated signals. In other 24 embodiments the splitter provides processed and different signals to leads 9.12 and 9.13 respectively, that is the I signal is different than the Q signal. The different I and Q 26 signals, depending upon the processor/splitter may or may not be related, that is they may or may not be cross-correlated. 28 Fig.10 is a multiple BRA and MFS transmitter architectures with one or more processors, modulators and amplifiers, antennas and interface connection(s) to wired or 30 cabled or other transmission media, including but not limited to mobile wired or wireless internet systems. On lead 10.1 one or more input signals are provided to signal interface 36 WO 2007/018566 PCT/US2005/035931 Unit 10.2. These input signals could be analog, mixed analog and digital (hybrid) or 2 digital baseband signals, such as prior art Non Return to Zero (NRZ) encoded or other digital signals. These input signals could be obtained from a sensor, from RFID devices, 4 from motion detectors, video cameras, television or other picture and or image processors or from signals generated by a touch screen operation. Unit 10.2 provides one or more 6 signals to one or more quadrature (designated also as QUAD or quad) baseband signal processors Units 10.3 or 10.4 and or to one or more non-quadrature baseband signal 8 processors included in Unit 10.17. These baseband signal processors interface, process and or generate one or more of OFDM, CDMA, W-CDMA or WCDMA, CDMA-2000, 10 CDMA EVDO, other CDMA, other spread spectrum or TDMA, or continuous data streams analog or digital signals for modulation. The embodiment of Fig.10 is for 12 multiple BRA and MFS signal processing, modulation and transmission and or for single modulation format or single modulation format selected systems. The term Bit Rate 14 Agile(BRA) means that the bit rate is selectable or tunable or adaptable to the system requirements and system objectives and the term Modulation Format Selectable(MFS) 16 means that various modulation formats can be selected and or that the modulation type or modulation types are adaptable to the system or user requirements. Units 10.5, 10.11 18 and 10.18 are single or plurality of non-quadrature or quadrature modulators. Units 10.6, 10.7, 10.8, 10.9, 10.10, 10.13, 10.14, 10.15, 10.16 and 10.19 to 10.23 are optional 20 amplifiers, filters, signal conditioners or signal processors antennas and interface points to wired or cabled transmission systems. Single or multiple controller Unit 10.24 22 controls through control signals present on connections or leads or software control algorithms on 10.25 the selection or combining process of one or more signals and 24 controls which signals should be connected to the transmission medium and when should the selected and or combined signals be transmitted. Unit 10.11 receives signals from 26 interface or processor Unit 10.2 . Unit 10.11 contains non -quadrature (also designated as non quadrature or non-QUAD or non-quad) modulators. 28 Fig.11a is a new implementation architecture and block diagram of a multiple communication link, also designated as a cascaded link, or a system having cascaded 30 units which inter operate in a sequence for multimode operated wireless and or wired and internet systems including fixed location systems and mobile systems. Unit 11.1 37 WO 2007/018566 PCT/US2005/035931 contains one or more of the following devices or signals generated by these devices: a 2 location finder, also designated as a Position Determining Entity (PDE) or Position Determining Device (PDD), a medical apparatus a diagnostic device, voice processor, 4 data processor, image processor, digital camera processor, video processor, a finger print stored or processed signal or image, DNA signal processors, music, other storage devices 6 or a screen touch generated or processed signal. One or more signals contained in Unit 11.1 are provided to Unit 11.2 containing a short range system, such as a WLAN, 8 Bluetooth, infrared or other communication system or sub system. The short range systems are connected to an optional medium range communication system, Unit 11.3. 10 The medium range system provides signals to one or more remote units, designated as Unit 11.4 of the system. The remote unit provides signals to the interface unit or units of 12 the transmission medium, designated as Unit 11.5. The signal path is implemented from the location finder, Unit 11.1 to the interface Unit 11.5 and also in the opposite direction 14 from interface Unit 11.5 to the location finder. The units in this structure, in one of the embodiments have fixed parameters while in an other embodiment are BRA and MFS 16 units operated in a single or in plurality of multi mode systems. In the embodiments of units 11.1 to 11.5 optional modulation devices and circuits are included. The prior art 18 implemented modulation circuits have two distinct implementation architectures. One of the implementations is known as quadrature modulator (also designated as QUAD-mod 20 or quad mod) and the second implementations is known as polar modulation and or designated herein as non-Quadrature, or non-QUAD modulation. 22 Fig.11b shows an exemplary prior art quadrature modulator. In a later part of this application, in the description of Fig.17b and Fig.17c two prior art polar and or non 24 QUAD architectures are described. In the exemplary prior art quadrature modulator, shown in Fig.11b, the input source signals, present on leads 11.6 and 11.7 are connected 26 to optional Digital to Analog(D/A) converters 11.8 and 11.9. These input signals are also known as in-phase (I) and quadrature-phase(Q) signals. The I and Q signals are provided 28 to optional filters, shown as 11.10 Filter-I and shown as 11.11 Filter-Q. The input signals on leads 11.6 and or 11.7 may include such signals as a microphone, video 30 camera, photo camera, facsimile, wireless internet connection, modem, or other source of customer, subscriber, or other user data signals or converted processed signals. The 38 WO 2007/018566 PCT/US2005/035931 optionally D/A converted and or optionally filtered I and Q signals, or the signals present 2 on input leads are provided to two multipliers (also known as mixers), designated as Unit 11.13 and Unit 11.6. These multipliers receive also an unmodulated carrier wave from a 4 frequency source or frequency generator, designated in the figure as Local Oscillator (LO), unit 11.12. In particular mixer 11.13 is provided by an unmodulated carrier wave 6 (CW) signal on lead 11.14, while mixer 11.16 is provided a CW signal which is 90 degrees phase shifted from the signal provided to mixer 11.13. Mixer 11.16 receives the 8 90 degree phase shifted signal from the 90 degree phase shifter unit, Unit 11.15. The outputs of mixers 11.13 and 11.16 are provided to the inputs of a summing device 11.17. 10 The output of summing device 11.17 is the quadrature modulated signal. It is provided to an optional signal amplifier (Ampl). The modulated signal is provided on lead 11.9 to the 12 transmission medium Fig.12 is an embodiment of an RF head end (alternatively designated as RF 14 subsystem or RF part) which is co-located with the baseband and or Intermediate Frequency(IF) processing units, or is at a remote location. Remote location means that 16 there is a separate physical unit (enclosure or box) other than is the unit and/or location of the baseband processing(BBP) and or Intermediate Frequency(IF) units. Unit 12.1 18 contains the BBP and or IF devices while Unit 12.2 is the RF head. The BBP circuits in Unit 12.1 in some embodiments have single processors , for processing a single baseband 20 signals , while in other embodiments contain multitude of baseband processors and or multitude of IF or multitude of RF processors , or multitude of RF head ends for 22 processing of more than one signal. The RF head includes one or more of the following Radio Frequency (RF) components: RF amplifiers, RF filters, circulators, RF splitters or 24 RF combiners, RF diplexers, RF switches, and or RF cables or connections including fiber optic communication (FOC) links. Unit 12.3 is the embodiment of one or more 26 transmit and/or receive antennas and Unit 12.4 is the structure for one or more interface elements, for interfacing the signals from or to Unit 12.2 to the wired or cabled or FOC 28 communications or broadcasting medium. All signals are enabled to flow from Unit 12.1 to Units 12.3 and 12. 4 and in reverse directions from Units 12.3 and or Unit 12.4 30 towards Unit 12.1. The embodiments and operation of Fig.12 include multi operation and multi function of a plurality of systems including: single or multiple location finder, 39 WO 2007/018566 PCT/US2005/035931 location tracker devices, position finder devices, Radio Frequency Identification 2 Devices(RFID), connected with single or multiple Bit Rate Agile(BRA) , and single modulation or Modulation Format Selectable(MFS) satellite and/or land based devices. 4 These systems components assembled in one or more combinations and variations operate in GSM, General Packet Radio Service (GPRS), Enhanced Digital GSM 6 Evolution (EDGE), or Evolution of GSM (E-GSM), Code Division Multiple Access (CDMA), Wideband Code Division Multiple Access (WCDMA or W-CDMA), 8 Orthogonal Frequency Division Multiple Access (OFDM), Time Division Multiple Access (TDMA) , IEEE 802.xx, Digital European Cordless Telecommunication (DECT), 10 Infrared (IR), Wireless Fidelity (Wi-Fi), Bluetooth, and other standardized as well as non-standardized systems. Fig.12 operations include single mode and or multimode 12 communication systems with co-located and remote located RF heads with single and or plurality of antennas. 14 Fig. 13 represents an alternative embodiment of a multi mode BRA and MFS system connected to single or multitude of wireless, wired, cabled or FOC connected and or 16 internet or mobile internet web based systems. A single bit rate and or a Bit Rate Agile (BRA) baseband processor and a single modulation format and/or Modulation Format 18 Selectable (MFS) system structure is shown. Units 13.1 to 13.4 are the embodiments of single bit rate and or single modulation format processors and or of multiple bit rate or 20 BRA and MFS processors, filters, modulators and amplifiers. The single or multiple amplified signals of the communication structure are provided to interface points and to 22 single or multiple antennas for wireless transmission, shown as antennas 13.5, and or to interface points 13.6 for systems having physical hardware or firmware connections or 24 connectors. Units 13.1 to 13.4 may contain single processors, filters and or modulators or may contain a multitude of processors, filters and or modulators which are connected in 26 a cascade(serial mode) or parallel or other configuration. Unit 13.2 contains one or more Time Constrained Signal (TCS) processors and or Long Response(LR) filters. The 28 signals processed and or filtered in Unit 13.2 are provided to single or multiple modulators, contained in Unit 13.3. In one of the embodiments, the modulators in Unit 30 13.3 are quadrature (QUAD) modulators, while in an other embodiment they are non quadrature(non-QUAD) modulators, while in an other implementation structure or 40 WO 2007/018566 PCT/US2005/035931 embodiment they are a combination of single or multiple QUAD and single or multiple 2 non-QUAD modulators. Some of the QUAD-modulators have cross-correlated in-phase (I) and quadrature-phase(Q) baseband signals, while other QUAD-modulator 4 embodiments have no cross-correlation between the I and Q baseband signals. In some of the implementations the transmit filters are matched to the receive filters , while in 6 other embodiments intentional mis-match between the transmit processor /filter and receiver processor/filters is implemented. A prior art non-quadrature modulator 8 embodiment is shown in the lower part of Fig. 13. Non-quadrature modulators are described in numerous prior art references; these are designated as FM modulators, FSK 10 modulators, BPSK modulators or by similar and or related names and acronyms. Interface Unit 13.7a provides signals to optional processor 13.7b. Processor 13.7b 12 implementation structures is an analog or digital or a hybrid (mixed analog and digital) baseband processor. The processed baseband signal is provided to non-quadrature 14 modulator, Unit 13.8 for modulation and connection to amplifier unit 13.9 for modulated signal amplification. The amplified signal is provided to the transmission medium, 16 antenna Unit 13.10 or to the wired or cabled transmission mediums interface Unit 13.11. FIG. 14 is an embodiment of a multi-mode, multi bit rate system, with BRA, MFS and 18 code selectable OFDM, WCDMA, Wi-Fi, WLAN, infrared, Bluetooth and or other spread spectrum or continuous data systems. The embodiments include connection and or 20 elements or units of the system architecture operating in a single mode or simultaneous multi-mode configuration. On single lead or multiple lead 14.1input analog and/or digital 22 and/or hybrid signals are provided to interface and or processor unit 14.2. Hybrid signals contain combination of single or multiple analog and/or digital signals. The signal or 24 signals on input lead 14.1 contain in certain embodiments video signals or audio signals or signals obtained from processed photography, DNA samples, fingerprints, touch 26 screen control or identification signals , RFID signals , telemetry, telematics , Remote Control processed signals or other web or www based communication or broadcast 28 signals. Interface processor may comprise a simple connection device, or a splitter or o a combiner or a signal processing circuit with one or more output connection leads. The 30 single or multiple output signal(s) are provided to Units 14.3 to 14.6 for signal interface and/or further processing. As shown in Fig.14 these units contain one or more of the 41 WO 2007/018566 PCT/US2005/035931 following interface units (connections) and/or signal processors: Unit 14.3 is a GSM 2 and/or GPRS and/or EDGE connection and/or signal processor, Unit 14.4 is a connection and/or spread spectrum signal processor, for example a Code Division Multiple Access 4 (CDMA) processor, an other type of Direct Sequence Spread Spectrum(DS-SS) processor, a Frequency Hopped Spread Spectrum (FH-SS) processor, a Collision Sense 6 Multiple Access(CSMA) spread spectrum connection lead and/or processor or an other variation of spread spectrum processors. Unit 14.5 is an OFDM signal connection and/or 8 processor, while Unit 14.6 is an interface unit connection and/or processor for one infrared signal or a plurality of infrared signals. In some of the implementations only one 10 the Units 14.3-14.6 is used, while in other embodiments a combination of these units is embodied. In alternate implementations the interface or processor for one of the 12 shown/designated processors is replaced by Wi-Fi, or other interfaces such as Fiber Optic Communication (FOC), or cable systems or other wired and/or wireless system 14 interfaces. One or multiple output signals of Units 14.3-14.6 are connected to a selector (switch, combiner or splitter or similar device), Unit 14.7 and provided to one or multiple 16 processors embodied in Unit 14.8. One or more output signals, from Unit 14.8, are connected to one or multiple modulators, shown in Unit 14.10. The output or outputs of 18 14.10 are connected to single or multiple transmit interface points shown as Unit 14.11. A controller, Unit 14.12 provides control signals to one or more Units, shown in Fig. 14, 20 for selection and/or processing of one or more signals and/or connection of the selected signals to the transmission interface unit(s) 14.11. 22 Fig. 15 is an adaptive Radio Frequency (RF) wave generator, RF processor, radio and modulator structure. The implementation includes baseband processor ,interface and 24 control unit , data clock interface and RF amplifiers, RF splitters or RF switch device and antennas. The implementation embodiments are for single or multi-mode modulation 26 formats and or for Modulation Format Selectable (MFS) and Bit Rate Agile(BRA) systems. The term Bit Rate Agile(BRA) means that the bit rates are adaptable or 28 selectable. Specifically the embodiment of a direct baseband to RF transmitter, such as used in Software Defined Radio (SDR) systems, with or without multiple transmitters 30 and with or without diversity is used. A frequency source signal is provided on single lead 15.1 or multiple leads 15.1 to adaptive RF frequency and or RF wave generator Unit 42 WO 2007/018566 PCT/US2005/035931 15.2. The source signal ,on lead 15.1 consists of a frequency reference source, such as an 2 oscillator, or a Phase Locked Loop (PLL), or a numerically controlled oscillator, or a frequency synthesizer, or a clock signal received from an other system, or an 4 unmodulated carrier wave(CW), or any other signal source. In certain embodiments RF frequency and or RF wave generator Unit 15.2 is merely an interface unit which provides 6 to one or multiple leads(connections) 15.3 the signal received on lead(connection) 15.1. In other embodiments RF frequency and or RF wave generator Unit 15.2 is an adaptive 8 RF agile (RFA) signal processor and signal generator. In some embodiments the RFA generator comprises a frequency synthesizer for the generation of multitude of 10 unmodulated CW signals, in other embodiments it generates one or a plurality of unmodulated or modulated RF signals. The generated RF signals might have a sinusoidal 12 wave shape or rectangular wave shape or other wave shapes or waveforms and one or more of the RF signals, provided to connections 15.3 are periodic or non-periodic signals. 14 On single or multiple connections (connections are also designated as leads) 15.4 control signals, obtained from units 15.15 and or 15.16, are provided to the processor Unit 15.5 16 for control, selection and further processing of one or more selected RF signals provided on leads15.3 to processor 15.5. RF Processor Unit 15.5 contains input selectors, for 18 selecting one or more of the signals, received on leads 15.3 and it also contains output selectors for selecting and providing one or more of the output signals to leads 15.6 and 20 subsequent connection of the selected output signals to one or multitude of amplifiers 15.7 and or 15.12. Unit 15.15 is an interface and or a processor unit, which includes an 22 interface circuit and optional processor circuits for signal conversion, e.g. Analog to Digital (A/D) signal conversion, Digital to Analog (D/A) signal conversion; converters 24 and or transducers for conversion of temperature, blood pressure, heart rate, fingerprint , DNA; touch screen (pressure or mere physical touch) , motion detector, interactive, 26 emergency sensors and or activators of emergency signals (e.g. smoke fire or heat detectors), excess humidity or flood or water level sensors, audio and or video signals, 28 scanned images, RFID generated signals, location based signals and/or other signals into processed electrical, optical, Infrared or other signals. One of the implementation 30 structures of Unit 15.15 includes parts of the baseband circuitry of a Software Defined Radio (SDR) and or the entire or the entire software part and or hardware or firmware 43 WO 2007/018566 PCT/US2005/035931 parts of the non RF parts of a SDR. Since the principles and technologies of Software 2 Defined Radio (SDR) implementations and structures were disclosed in the prior art, including in Hickling, R.M.: " New technology facilitates true software -defined radio", 4 RF Design Magazine April 2005, Tuttlebee, W. :"Software Defined Radio: Baseband Technology for 3G Handsets and Basestations", John Wiley & Sons, Ltd. , Chichester, 6 West Sussex, England, Copyright 2004 , ISBN 0-470-86770-1, and patents such as US pat.6,906,996 , issued to Ballantyne, G.J. , Assignee Qualcomm, Inc., and US Pat. 8 5,430,416, issued to Black et al., Assignee Motorola, there is no need to include additional details of SDR in this Application. Processor Unit 15.5 contains one or more 10 optional circuits . Within Unit 15.5 there are input signal leads (arrows), shown on the left hand side, and output signal leads, and shown on the right hand side. In Unit 15.5 the 12 bold line represents a signal connection between a selected signal from input lead 15.3 to output lead 15.6. The signal present on the bold line, (representing a connection) may be 14 selected or not selected. The 1 st RF processor, 2 nd RF processor, Filter Amplifier LIN or NLA are implementations of different processors and or different modulators. The 16 implemented modulators are in some implementations quadrature(QUAD) modulators, while in other embodiments they are non-quadrature(non-QUAD) modulators, such as 18 polar modulators. In certain designs the amplifiers operate in a relatively linear mode (LIN amplifier) while in other embodiments they operate in a Non-Linearly Amplified 20 (NLA) mode, close or at saturation. In an other implementation the amplifiers may be switched or adapted to operate in a LIN or in a NLA mode. In certain implementations a 22 multiple number of the aforementioned RF processor and or modulators, filters and amplifiers are used. The Interface and or Control/Processor Unit 15.5 in combination 24 with the data clock interface unit 15.16 selects one or more of the output signals and connects the single or multitude of selected Unit 15.5 output signals to one or more 26 optional amplifiers 15.7 and or 15.12. One or a plurality of the output signals is provided to one or more of the transmission media interface points, shown as 15.8, 15.10, 15.11 28 and 15.14. Elements 15.9 and 15.13 are optional signal switch or splitter or combiner or duplexer or diplexer units. 30 Fig. 16 is a multimode, multipurpose system which incorporates embodiments for numerous applications, including but not limited to enhanced performance , increased 44 WO 2007/018566 PCT/US2005/035931 coverage , higher speed information and data transfer wired and wireless communications 2 seamless communications, communications over different operating systems and different standards, including American and internationally standardized systems, non 4 standardized systems, signal processing and storage, data manipulation, diagnostics, broadcasting entertainment, educational and alarm system for seamless adaptive 6 communications, emergency reporting, location finding and remote control embodiments. Implementation and or selection of one or more of the system and 8 network components, shown in Fig.16, enable information storage, use of multimedia tools including voice, music, camera, high definition camera, real-time one -way, two 10 way or multi-way video and or and or voice calling, broadcasting and communications, still and moving image capture and editing. Direct access to launch browsers from the 12 screen, by touching the screen or other direct access does not require push buttons. Addition of supplemental memory or removal of memory and or of other components is 14 enabled by insertion or removal of components into one or more of the units shown in Fig.16. Interconnection between cellular systems, Bluetooth, infrared, Wi-Fi with remote 16 control devices, with cellular phone and automobile based or home based radio or television and or computer systems is enabled. One of Fig.16 optional interconnections or 18 communications with mobile devices in automobiles, other portable or mobile devices including motorcycles or other vehicles, e.g. tractors or trains or boats or ships or 20 airplanes and or remote control systems is also shown in Fig.27. Information and signal transmission and reception (communication and or broadcasting) are enabled between 22 two or more than two users. Architectures and embodiments enable a single user to process, store and manipulate information and or to transmit it to others, or transfer to the 24 user, computer, printer camera, facsimile or to other interface. The different units and or elements (components) of the system are optional and the system is operative in multiple 26 embodiments without the use of certain elements (units) and or with an different interconnection between the units. In particular one or multiple elements 16.1 to 16.13 28 are connected and or selected through single or multiple leads 16.14 for connection to and from unit 16.15. Unit 16.1 contains a signal interface and or a signal processor for 30 locator and or tracker device generated signals. Unit 16.2 contains a remote control signal interface or signal processor unit. Unit 16.3 contains a video game signal interface or 45 WO 2007/018566 PCT/US2005/035931 signal processor unit. Unit 16.4 contains a digital camera and or scanner signal interface 2 or signal processor unit. Unit 16.5 contains an emergency and or alarm signal interface or signal processor unit. Unit 16.6 contains voice, or telephony signal or music signal 4 interface or signal processor unit or a combination of these interface units. Unit 16.7 contains interface circuits or signal processors for telemetry, telematics or photograph or 6 scanned or facsimile signals. Unit 16.8 contains signal interface or signal processor elements for fingerprint identification and or fingerprint control and or touch screen 8 control or DNA based signals. Unit 16.9 contains signal interface or signal processor elements for sensor, transducer, detector (including motion detector, pressure detector, 10 heat or smoke detector), Radio Frequency Identification and Detection (RFID) obtained signals. Unit 16.10 contains signal interface or signal processor unit to interface with 12 stored analog or digital information, including stored music, stored video, stored images, stored scanned data information or other stored information. Unit 16.11 contains signal 14 or data interface or signal or data processor device for connection and or processing of computer, including mobile computer, Personal Digital Assistant(PDA) and other digital 16 or analog signals. Unit 16.12 contains signal interface or signal processor unit for connection, interface or coupling of music and or video, and or animated graphics and or 18 sensor detected -transformed signals or other stored and or retrieved information signals including signals containing educational and or entertainment materials. Unit 16.13 20 contains medical and or information signal interface or signal processor unit, including diagnostics, sensor, transducer obtained signals, motion detector or pressure detector or 22 DNA generated or stored signals and or information.. Unit 16.15 embodies one or more signal processors and communication devices for 24 providing single or multimode communications, multidirectional (to and from) through single or multiple communications and or broadcast media to single or multiple terminals 26 16.18, 16.21 and 16.23 and or to one or multiple interface units 16.1 to 16.13. Terminal or Subscriber Units(SU), also designated as Subscribers(SC), are in some of the 28 embodiments operated in a peer subscriber mode while in other configurations they are in a star, mesh or other network configuration, including optional adaptive network. An 30 adaptive network is a network in which the connection between various elements of the network and the communication system format are changeable, that is, they are selectable 46 WO 2007/018566 PCT/US2005/035931 or adaptable. The adaptive network configuration, interaction between various elements, 2 selection of signals, selection and connection of one or of a multitude of signals and or interface units and or of one or more processors is controlled by the control unit, Unit 4 16.24. Control unit 16.24 provides and or receives one or multiple signals through single or multiple leads 16.25 from or to Unit 16.15, from or to the Subscriber Units (SU) and or 6 from or to one more interface units 16.1 to 16.13. The signals from or to control unit 16.24 are chosen by manual control or voice control or other direct operator control, and 8 or remotely and or electronically and or by software or firmware and or by hardware or firmware. Unit 16.15 is a single and or multimode, single and or multipurpose 10 communication and signal processing and or data processing unit. Unit 16.15 contains one or more of the following interface points and or connections and or communication 12 devices: Voice over Internet Protocol (VoIP), Video Internet Protocol (ViIP) or video over internet or video over intranet, wireless, mobile system elements including one or 14 more processors, modulators demodulators(modems) , transmitters receivers(TR) for TDMA, FDMA, GSM, GPRS EDGE, WCDMA, CDMA lx, EV-DO, WLAN, WMAN, 16 Wi-Fi, IEEE 802.xx, cable, DSL, satellite, cable, infrared(IR), Bluetooth, location finder, GPS, emergency alarm medical diagnostics or appliance communicator. These units 18 operate in a "plug and play" configuration, that is, each unit can operate as a single unit or part of simultaneous operation in a network with several other units or in an adaptive 20 network. The processors and or modulators contained in Unit 16.15 in certain implementations have non-quadrature (non-QUAD) architectures, such as in certain 22 Frequency Modulated(FM) or Phase Modulated(PM) systems, e.g. FSK modulated or GFSK modulated systems, and Amplitude Modulated (AM) systems, including but not 24 limited to implementations of polar modulated systems. In other embodiments quadrature modulation (QUAD mod) architectures with or without cross-correlation in 26 the transmit baseband in-phase (I) and quadrature -phase(Q) signals is implemented. In some other embodiments multiple modem architectures are implemented . In certain 28 embodiments Unit 16.15 or one or more of interface Units 16.1 to 16.13 and or subscriber units (SU) 16.18, 16.21 and or 16.23 contain one or more of the following systems, 30 components or signals: Multi-purpose System and Devices for Locator/Trackers -Position Determining Entity (PDE), Remote Control (RC), video, photograph, facsimile, 47 WO 2007/018566 PCT/US2005/035931 emergency alarm, telephony signal, voice, music telemetry fingerprint -DNA device 2 activation sensor, motion sensor, body temperature sensor, Base Station Controller (BSC), Terminal or Subscriber Unit (SU) Base Station Transceiver Subsystem (BTS) 4. 'devices. Each unit may contain processor, memory, communication port or interface, single or multiple modulator and or demodulator, automatic transmission alert of 6 unauthorized and authorized fingerprint originated signals. Lead or leads 16.25a and 16.25b show optional connections with Units in Fig.27 with one or more elements of 8 Fig.16 and or units in other figures. For user identification, user authentication, for medical information, emergency and 10 alarm processing, for law enforcement, for financial and or other transactions, for signal transmission, reception and or control of one or more of Units 16.1 to 16.13, these units 12 in certain implementations are interconnected with and or comprise selected units of Fig. 26 and or of Fig.27 and or of Fig.30 and or of other figures of this disclosure. As an 14 exemplary embodiment Unit 16.8 contains single and or multiple fingerprint sensors and conversion devices for conversion and or coding of the information contained in the 16 fingerprint to signals suitable for multiuse signal processing, storage, authentication and/or identification of one or of a plurality of users and single and or multiple signal 18 transmission. The signal transmitters transmit the signals provided by the single or multiple fingerprint sensors. The signal transmission of the fingerprint signals , 20 depending on the setting of the transmitter is based on the authorized user and or by unauthorized user. Authorized and also unauthorized signal transmission is under the 22 control of control Unit 16.24. Control Unit 16.24 contains in certain applications memory, processing and storage devices for storing the fingerprint information of the 24 authorized and also of the unauthorized user and may provide control signals for transmission of the fingerprint information in addition to the dialed recipient to a third 26 party, e.g. to a police department, to an emergency center or other law enforcement and or health care agency, or an individual or an alarm monitoring company, or the users 28 alternate receiver device, which could include recording and/or storing the information on the same device in which the signal transmission originates. The telephone number(s) and 30 or other information, e.g. e-mail address of the said third party may be preprogrammed by the authorized user and or remotely preprogrammed by law enforcement agencies. If 48 WO 2007/018566 PCT/US2005/035931 unauthorized signal transmission (or authorized under force and or against the free will 2 of the authorized user) is underway , the control unit 16.24 inserts "alarm" or "flag" signals into the transmitter path, alerting the single or multiple recipients , including the 4 third party recipient that unauthorized and or emergency signals are transmitted and including signals for the recipient to store the unauthorized fingerprint and or the entire or 6 part of the conversation and or communication. One of the sections of the fingerprint unit 16.8 and or the control and processor and memory unit 16.24 , if requested by the control 8 unit, based on reception and detection information of the received signal may store the received fingerprint information and or the received communications speech, picture, 10 video or DNA or information in other forms. Authorizing may be performed locally or based upon a remote authorization signal. In case of unauthorized signal transmission, 12 based on signal transmission of an unauthorized fingerprint user, Control Unit 16.24, in certain applications, directs the camera and or video recorder to take pictures and or 14 video clips of the unauthorized transmitter 's surroundings and add these signals to the intended recipient and to the third party receiver. In some embodiments, Unit 16.8 and or 16 Unit 16.6 in conjunction with one or more other units 16.1 to 16.13, without the use of unit 16.8 are used for authorized user authentication and signal transmission storage, 18 processing to third parties and to the users devices. In certain embodiments fingerprint sensor and converter of the fingerprint sensor 20 provided information into signals which can be processed and stored and or analyzed, identified with a particular individual are included for single or multiple fingerprints in 22 Unit 16.8 and or Unit 16.24. One or multiple fingerprints are used for single or multiple communication and or control and or location purposes. For example location of a mobile 24 unit is enhanced by providing a fingerprint database having a multiplicity of transmitted fingerprints, each fingerprint in the fingerprint database having an associated unique 26 location. Fingerprint information has multiuse benefits, including authentication of authorized use or of unauthorized use , locating the position of the device (mobile device 28 and or stationary device), emergency request and or signal transmission and or storage to third parties, identification of the unauthorized user. Barcode reader, Unit 16.13b, within 30 the structure of Fig.16 and or in combination or connection with the structures of other figures of this disclosure, including but not limited to the structures of Fig.27 has 49 WO 2007/018566 PCT/US2005/035931 multiuse applications, including the above described use and applications. 2 Fig. 17a contains non-quadrature(non-QUAD) and quadrature modulation (Quad Mod or QUAD mod) multiple modulator exemplary embodiments, including polar modulator 4 structures with and or without selection and or combining and connection of one or more of the modulated signals to one or a plurality of amplifiers and or one or more optional 6 antennas, with and without cross-correlated quadrature modulation implementations for Bit Rate Agile (BRA) or Bit Rate Adaptive(BRA), Modulation Format Selectable(MFS) 8 and radio frequency agile (RFA) system implementations having single or multitude of modulators, amplifiers and antennas. 10 Fig. 17b Polar (non Quadrature) exemplary prior art modulator implementation block diagram is shown in this figure 12 Fig. 17c An other Non-Quadrature (non-QUAD) exemplary prior art modulator architecture is shown in this figure. 14 Fig. 17a is described in more detail in this section. While, the prior art in general and Feher' s U.S. patents, e.g. U.S. pat: 5,491,457; 6,470,055; 6,198,777; 6,665,348; 16 6,757,334 and Ballantyne' s U.S. pat 6,906,996, assigned to Qualcomm Inc., contain disclosures of multiple modulation wireless transmitters and communication systems, the 18 prior art does not disclose the Fig. 17a disclosed architectures, structures and embodiments for system configurations and implementations of multiple modulator 20 embodiments, including polar modulator structures with and or without selection and or combining and connection of one or more of the modulated signals to one or a plurality 22 of amplifiers and or one or more optional antennas, with and without cross-correlated quadrature modulation implementations for BRA, MFS, and RFA system 24 implementations having single or multitude of modulators, amplifiers and antennas with selectable single or multiple signal sources, disclosed in conjunction with Fig.17a, Fig.1, 26 Fig.2, Fig.3, Fig.16, Fig.18 , Fig.27 and or other figures and relevant parts of the currently disclosed specifications and claims. In Fig. 17a Unit 17.1 is a single or multiple 28 interface unit for connection of single or multiple signals to one or more signal and or data processor elements, shown as Unit 17.2. While four (4) processor units (boxes) are 30 illustrated, in certain embodiments only one processor is used, while in other embodiments two or more processors are implemented. Single or multiple processor(s) 50 WO 2007/018566 PCT/US2005/035931 provide processed signals to one or more than one (multiple or plurality) of modulator 2 Unit(s) 17.3 for modulation. The processed signal or processed multiple signals are provided to single or multiple modulator Unit(s) 17.3. The signal connection or multiple 4 connections between the processor(s) 17.2 and modulator(s) 17.3 is/are under the control of a control unit 17.9 and or under the control of an operator. One or more of the 6 modulated signals is provided to a first optional modulated signal selector (switch) and or combiner and or splitter unit 17.4. One or more outputs of Unit 17.4 are connected to one 8 or a plurality of amplifiers 17.5. The amplified signal or signals are connected to the second optional selector, combiner or splitter unit 17.6.The outputs of Unit 17.6 are 10 provided to an optional signal interface unit 17.7 and afterwards to one or more optional antennas, Unit 17.8. There is a variety quadrature modulator embodiments disclosed in 12 the prior art. In Fig.11b of the current application an exemplary prior art quadrature modulation implementation is highlighted. One or multiple quadrature modulator (QUAD 14 mod) implementations and embodiments are used in the embodiments of the quadrature modulators, shown in Fig. 17. In certain embodiments of Fig.17 one or more non 16 quadrature (non-QUAD) modulators are implemented, in addition to QUAD modulators and or instead of QUAD modulators. Some of the non-quadrature modulation structures 18 are known in the prior art as polar modulation, while other non-QUAD modulators are prior art Frequency Modulators (FM), Frequency Shift Keying ( FSK), Gaussian 20 Frequency Shift Keying (GFSK), Amplitude Modulator (AM) systems and devices. Fig.17b and Fig.17c.show two prior art non-QUAD modulation architectures. 22 Fig.17b is based on Lindoff et al. US patent 6,101,224 and Black et al .US pat 5,430,416, assigned to Motorola. The illustrated non-QUAD modulation technique is also 24 known as polar modulation, since it is based on a polar representation of the baseband signals. In this non-Quad modulator polar components i.e., amplitude (r) and phase (p) 26 components are used, instead of in-phase (I) and quadrature-phase (Q) components used in quad modulation techniques. In this exemplary prior art modulator, the source signal 28 (or information signal) to be transmitted is present on connection 17.10. Signal processor 17.11 generates a signal amplitude component and a signal phase component. These 30 signal components are provided to a Digital to Analog (D/A) converter and to a Phase Modulator (PM) respectively. The phase component modulates the carrier signal in a 51 WO 2007/018566 PCT/US2005/035931 phase modulator 17.13, resulting in a phase modulation with constant envelope. The 2 amplitude component is converted to an analog signal in a D/A-converter and then fed through a regulator (Reg) 17.14 which adjusts the current or voltage of the signal 4 controlling the power of a power amplifier (PA) 17.15, based on the signal and the output D/A converted signal 17.12 . The regulated analog signal modulates the phase 6 modulated carrier signal in the power amplifier 17.15 by controlling the power of the power amplifier. The resulting amplified signal is then provided for transmission. 8 Fig.17c shows an exemplary other prior art Non-QUAD modulator. In this implementation the source signal, present on lead 17.16 is provided to a Phase Modulator 10 (PM) or Frequency Modulator (FM), Unit 17.17. The PM and/or FM modulated signal is provided to a subsequent Amplitude Modulator (AM) and the AM modulated signal is 12 provided to the transmission medium interface on lead 17.19. Fig. 18 is a location (position) finder, communication and or broadcast and Radio 14 Frequency Identification Detection (RFID) single and or multimode system. Unit 18.1 contains one or a plurality of location finder (also designated as position finder) and or 16 tracker interface units or systems, which are satellite based, or land based or based on or in water and or air based. On water based systems include ships, boats, vessels, buoys, 18 swimmers, floating devices. In water systems include submarines, divers, fish, sharks, creatures and or their attached devices. Air based systems are in aircraft such as airplanes, 20 helicopters, Unmanned Vehicles (UV) or in balloons or in birds or in other objects or air based items, including but not limited to rockets, missiles, space shuttles or other items. 22 In certain embodiments Unit 18.1 includes optional communication and or control devices, such as Remote Control (RC) devices. One or multiple communication and or 24 control devices are contained in one or more units shown in Fig.18. In one embodiment all Units 18.1 to 18.15 include interface and or processor circuits for single or multiple 26 location finders, single or multiple communication and or single or multiple RFID and or single or multiple control. Unit 18.2 contains one or more interface and or processing 28 and or modulation -demodulation units for GSM, GPRS, EDGE, TDMA, OFDMA, CDMA, WCDMA, Wi-Fi, Bluetooth, Infrared (IR) , CDMA, WCDMA, IEEE 802.xx or 30 other communication systems. Units 18.3 contains single or multimode wireless or wired transceivers and interconnection between a multitude of units, shown in Fig. 18. Optional 52 WO 2007/018566 PCT/US2005/035931 interface units 18.10 and 18.11 provide signals for further processing to one or more 2 interface connections 18.12, 18.13, 18.14 and or 18.15 Fig. 19 is a Software Defined Radio (SDR), Multiple SDR (MSDR) and Hybrid 4 Defined Radio (HDR) transmitter and receiver embodiment, with single or multiple processors, single and or multiple RF amplifiers and antennas and single or multiple 6 SDR and or non-SDR implementation architectures. While SDR implementations, and embodiments have been disclosed in the prior art, including in exemplary cited 8 references: book by Tuttlebee, W.:" Software Defined Radio: Baseband Technology for 3G Handsets and Basestations ", John Wiley & Sons, Ltd., Chichester, West Sussex, 10 England, Copyright 2004, ISBN 0-470-86770-1.; article by Hickling, R.M.:" New technology facilitates true software -defined radio" RF Design Magazine April 2005, 12 available from www.rfdesign.com (5 pages), and numerous patents, such as exemplary cited patents, including Kohno et al.: U.S. Pat.6,823,181, "Universal platform for 14 software defined radio", assigned to Sony Corporation, Tokyo, Ballantyne' s US pat 6,906,996 "Multiple Modulation Wireless Transmitter", assigned to Qualcomm, Inc., the 16 prior art does not disclose nor anticipate the implementations, embodiments and architectures of Software Defined Radio (SDR) and or Multiple SDR (MSDR) and or 18 Hybrid Defined Radio(HDR) transmitter and receiver embodiments, with single or multiple processors, single and or multiple RF amplifiers and antennas and single or 20 multiple SDR implementation architectures described in the specifications related to Fig. 19 and in other sections of this application . An exemplary prior art SDR contains an 22 interface unit, such as Unit 19.1, a processor and a Digital to Analog (D/A) converter, Unit 19.2, an RF subsystem consisting of transmit RF amplifier, Unit 19.3, signal 24 connection to and from transmit and or receive antenna, Unit 19.4, in the received signal path an optional RF Band-Pass-Filter (BPF), Unit 19.9, an Analog to Digital Converter 26 (A/D) , Unit 19.8, and a signal processor, Unit 19.7. The new Software Defined Radio (SDR) system, disclosed in this application contains one or more SDR connected to one 28 or more RF transmit amplifiers and connected to one or more transmit antennas and one or more receive antennas. With multiple antennas transmit and or receive diversity 30 systems are implemented. If multiple SDR is used then the system is designated as a Multiple SDR (MSDR). The SDR receiver part consists of one or more SDR receivers 53 WO 2007/018566 PCT/US2005/035931 and or one or more conventional (non SDR) receiver systems In some of the 2 embodiments one or more SDR transmitters and or SDR receivers are used in conjunction with one or more non-SDR transmitter or receiver implementations. Non 4 SDR systems are radio systems which are implemented by firmware and hardware components and may include software applications or software processors, such as 6 Digital Signal Processors. Systems which incorporate SDR components as well as non SDR components (e.g. conventional prior art radio systems having mixed software, 8 firmware and or hardware at baseband and or IF and or at RF) are designated as Hybrid Defined Radio (HDR) systems. Units 19.4 and 19.12 are transmit and or receive 10 antennas. Additional antennas 19.6 and 19.13 transmit and or receive signals to the SDR and or MSDR and or HDR units. In this figure, all units 19.1 to 19.13 are single units in 12 some embodiments, while all units 19.1 to 19.13 are single or multiple units in other embodiments. Unit 19.5 is a control unit for control of one or more units. In certain 14 implementations selected units in Fig. 19 are BRA and MFS units, while in other embodiments single and or multiple units are used for transmission of the same bit rate 16 and signal having the same specified modulation format. Control unit 19.4 generates and provides control signals to various transmitters and receivers and antennas for the 18 selection and reception of specified signals. Fig. 20 contains an interface unit or multiple interface units, set of modulators, 20 amplifiers, selection devices and or combiner devices which provide RF signals to the transmission medium. Single or multiple interface units, single or multiple modulation, 22 single or multiple amplification, BRA and MFS structures and implementations are included. In this embodiment input lead 20.1 or multiple input leads 20.1 provide an 24 input signal or multiple input signals to single or multiple interface and or processor unit 20.2. At the output of Unit 20.2 on one or multiple signal leads quadrature or non 26 quadrature signals are provided. In-phase (I) and quadrature-phase(Q) baseband signals are provided to Unit 20.3a. Unit 20.3a is a quadrature modulator which provides in some 28 embodiments cross-correlated I and Q (designated also as I/Q) baseband signals , while in other embodiments there is no cross-correlation provided for the I/Q baseband signals, 30 which are quadrature modulated(QM) in Unit 20.3a. Unit 20.3b contains one or more quadrature modulators(QM). The implementation of one or more of the QM, contained in 54 WO 2007/018566 PCT/US2005/035931 unit 20.3b is in certain embodiments a SDR implementation structure, in some other 2 embodiments it is a MSDR structure, while in certain other embodiments it is a HDR and or it is an other conventional prior art QM structure. Units 20.4a and 20.4b are non 4 quadrature modulators. One or more of these modulators are embodied by conventional prior art non-quadrature modulators, such as FM, PM or AM or BPSK or FSK or other 6 non SDR architectures, while in certain other embodiments the non-quadrature modulators are implemented by SDR and or by MSDR and or by HDR architectures and 8 or by digital or analog polar modulation structures. One or more of the modulators 20.3a, 20.3b, 20.4a and or 20.4b in certain implementations operate at an Intermediate 10 Frequency(IF) and contain an up-converter unit (frequency translation device) to the desired Radio Frequency (RF). One or more of the modulators 20.3a, 20.3b, 20.4a and 12 or 20.4b in certain implementations are Bit Rate Agile or Bit Rate Adaptable(BRA) and or Modulation Format Selectable(MFS) and or Modulation Embodiment Selectable 14 (MES) systems. In certain designs and or embodiments the same modulation format and same bit rate is used, however the modulation embodiment is different. For example, in 16 an application a GMSK modulated system uses a Quadrature Modulation(QM) structure for low transmit power applications, while for a high transmit power application it uses a 18 non-quadrature modulation(NQM) , e.g. polar implementation structure. Thus, in this example the same GMSK modulation format , having the same bit rate (or a different bit 20 rate) is switched (or selected) to be transmitted instead in the QM embodiment in a NQM embodiment. One or more of the modulators 20.3a, 20.3b, 20.4a and or 20.4b in certain 22 implementations are IF and or RF agile, that is IF and or RF adaptable modulators, having selectable and or adaptable center frequency (and or center frequencies) of the 24 modulated signal(s), which is (are)most suitable for the desired transmission frequency band. One or more of the modulators provides signals to one or more optional 26 preamplifiers 20.5a, 20.5b, 20.6a and or 20.6b and or to one or more optional Power Amplifiers (PA) 20.7a, 20.7b, 20.8a and or 20.8b. 28 The preamplifiers operate in a linearized or linearly amplified (LINA) mode or in a Non Linearly Amplified (NLA) mode. One or more of the amplified signals are provided to 30 the output connector 20.10 through optional single or multiple combiner unit 20.9. 55 WO 2007/018566 PCT/US2005/035931 Fig. 21 is an embodiment of a single or multiple transmitter architecture using 2 single or multiple transmitters; the multiple transmitter implementations are also designated as a diversity transmitter. This figure contains some of the elements, disclosed 4 in prior art cited reference Feher's U.S. pat. 6,665,348. On input lead 21.1 there is a single signal or there are multiple signals provided to Unit 21.2. Unit 21.2 contains one or 6 more interface circuits and or one or more processors and or one or more splitters and or one or more Serial to Parallel(S/P) conversion circuits and or one or more signal switch 8 (selector) circuits, one or more cross-correlator (XCor) circuits and one or more optional in-phase (I) and Quadrature -Phase (Q) signal processors and or generators. Unit 21.3 10 receives one or more I and Q signals from Unit 21.2. In Unit 21.3 one or more signal processors and one or more optional Quadrature Modulators (QM) are implemented. The 12 output processed and or modulated signals are provided to optional units 21.5, 21.7 and 21.9 and or 21.11 for optional signal amplification by one or more linear amplifiers 14 (LIN) or one or more Non-Linear Amplifiers(NLA) and or one or more Power Amplifiers(PA) and provided to one or more antenna 21.9 and or one or more interface 16 connections 21.12 to interface with one or more communication systems. Unit 21.4 receives one or more signals from Unit 21.2. In Unit 21.4 there are one or more interface 18 points (or interface connections), processors and or one or more non Quadrature modulators (Non Quad or NonQUAD or NQM) modulators. Units 21.5, 21.6, 21.7, 21.8, 20 21.10 and 21.12 are optional amplifiers, antennas and or interface points. Fig.22 is a Multiple Input Multiple Output (MIMO) system. On single or multiple 22 input lead 22.1 one or more input signals are provided to single or multiple interface and or single or multiple processor unit 22.2. The non-quadrature input signals are designated 24 as In, to Inn , the n subscript indicating that there are n non-quadrature input signals, where n is an integer n=1,2,3.., while the quadrature inputs are designated as Im and Qm, 26 the m subscript indicating that there are m input quadrature signals, where m is an integer m=1,2,3... In unit 22.3 a single or multiple interface unit and a single or multiple 28 processor unit is embodied. The processor(s) process baseband signals into suitable baseband formats for subsequent single or plurality of signal selections for subsequent 30 modulation of CDMA,WCDMA, EvDo, GSM, GPRS, EDGE, OFDM, TDMA or Video Digital, or camera signals, photo camera originated signals, diagnostics, scanner X-ray, or 56 WO 2007/018566 PCT/US2005/035931 medical device signals, Bluetooth originated signals or, infrared originated signals and 2 selection or connection of one or more of these signals to one or more quadrature or non quadrature modulators, implemented in Unit 22.3. One or multiple modulators, 4 implemented in Unit 22.3 receive one or more of these signals and modulate them in single or multiple non-quadrature or quadrature modulator embodiments. One or multiple 6 optional amplifiers , embodied in optional unit 22.4a are connected by optional single or multiple switching or splitting elements 22.4b, 22.5a or 22.5b to one or more antennas, 8 shown as an antenna array, Unit 22.6 and or to an optional RF unit 22.7. Unit 22.7 contains an RF interface point and or one or more RF switching, combining, duplexer or 10 diplexer and or splitter units. RF unit 22.7 is connected to output interface point 22.8 and /or to one or more antennas embodied in unit 22.7. Multiple I and Q inputs (I/Q inputs) 12 with multiple non-quadrature inputs, connected to one or multiple processors, modulators, optional amplifiers RF combiners or RF switching elements and antennas, as 14 embodied in one or more of the configurations and connection of selected elements of Fig.22 distinguishes the embodiments from prior art. 16 Fig. 23 is a Single Input Multiple Output (SIMO), Multiple Input Multiple Output (MIMO), and or Multiple Input Single Output (MISO) embodiment having one or 18 multiple RF interface points and or one or multitude of antennas. The configuration with multiple antennas is also known as a system with antenna arrays and or a diversity 20 system. On input lead or multiple input leads 23.1 one or multiple signals are connected to single or multiple interface Unit 23.2. One or more than one optional baseband 22 processors (BBP) are contained in some of the embodiments of Unit 23.2. One or plurality of signals is present on connections(or leads) designated as 1,2,..M. One or more 24 of these signals are connected to one or more modulators, contained in Unit 23.3. These modulators designated as Mod.1, Mod.2... and Mod.M modulate one or more input 26 signals and provide the modulated signals to one or more optional amplifiers, contained in Unit 23.4 Through optional switching elements 23.6, designated as Swl, Sw2...SwM 28 one or more modulated signals are provided to one or more optional antennas 23.5 (Ant.1, Ant.2..Ant.N) and or RF Unit 23.7.The number of embodied modulators in 30 certain implementations is the same as the number of switches and antennas in Unit 23.5, while in other embodiments it is different. In Unit 23.7 there is an RF interface and 57 WO 2007/018566 PCT/US2005/035931 optional RF combiner, splitter or switch unit for providing one or more RF signals to the 2 subsequent single or multiple RF interface unit 23.9 and or optional single or multiple antenna 23.8. 4 Fig. 24 is an antenna array implementing Multiple Input Multiple Output (MIMO) and or Single Input Multiple Output (SIMO) and or Multiple Input Single Output (MISO) 6 communication, position finding and broadcasting transmission-reception system, including transmit antenna diversity and receive antenna diversity systems. While the 8 system contains elements of one or more Feher's prior art references, e.g. Feher's US pat. 6,665,348, the configurations, interconnections and operation with other system elements 10 disclosed in this application and shown in previous or subsequent figures of this disclosure are new. On single or multiple input leads 24.1 one or more modulated RF 12 signals are received and connected to optional single or multiple RF interface and or RF processor 24.2. Unit 24.2 in certain embodiments includes transmit processors, while in 14 other embodiments it includes transmit and or receive processors. The received RF modulated signals on connection 24.1 are provided by one or more disclosed 16 embodiments in the description of previous or subsequent figures of this disclosure. One or multiple transmit antennas contained in Unit 24.3 are connected to one or more RF 18 modulated signals. Single or multiple receivers have a single or multiple antennas, embodied in unit 24.4. In certain embodiments transmit and receive components, 20 including connections /leads, interface units, processors and antennas are the same components, or are at the same location, while in other implementations the transmit and 22 receive components are distinct physical units, while in some alternate implementations certain transmit and receive components are contained in the same physical units, while 24 certain other transmit and receive components are distinct units. On receive single or multiple connections 24.5 one or more signals from the receiver antennas are connected 26 to optional receive RF interface unit 24.6 which contains optional combiner, selector or switch or other RF signal processors and or RF processors combined with frequency 28 down conversion components , IF processors and baseband processors. Single or multiple output signals are provided on output connection lead 24.7 Out 1 to Out N. 30 Fig. 25 Software Defined Radio (SDR) and Hybrid Defined Radio (HDR) systems for Multiple Input Multiple Output (MIMO) and or Single Input Multiple Output (SIMO) 58 WO 2007/018566 PCT/US2005/035931 and or Multiple Input Single Uutput (MISO) communication, position finding and or 2 broadcasting transmission-reception systems, including diversity systems are implemented in this figure. On single or multiple input connections signals are provided 4 to one or more of transmit (Tx) interface and or transmit processor units 25.1, 25.5 and 25.9. These units are parts of SDR and or HDR system embodiments. One or more of 6 units 25.1, 25.5 and or 25.9 receive signals from one or multiple sources, for example from a location finder and or tracker source, a communications device, a remote 8 controller, multiple remote controllers, an RFID device, a patient monitoring device, a video source, a video broadcasting source, video conferencing source, a source providing 10 video clips, cellevision (cellular television), mobile vision, WiFi , WiMax an alarm monitor, a camera, a source providing data for credit card verification and or credit card 12 transactions, a source providing bank transactions , a source providing electronic commerce signals /data and or other sources. In the SDR, units 25.1 and 25.5 process 14 signals and provide them to Digital to Analog (D/A) converters (DAC) 25.2 and 25.6. In the HDR, one or more signals and or D/A converted signals are provided to one or 16 multiple RF processing units 25.3 and/or 25.7 or 25.11.The RF processed and or RF amplified outputs, of the SDR units, are provided to single or multiple transmit interface 18 units or single or multiple transmit antennas, designated as Out 25.4 and 25.8. Element 25.9 receives single or multiple input signals for baseband and or Intermediate Frequency 20 (IF) and or IF and or IF and RF or merely RF transmission processing of the system. The RF signals are further processed in optional unit 25.10 and provided to single or multiple 22 transmit interface units or single or multiple transmit antennas, designated as Out 25.11. Units 25.9, 25.10 and 25.11 are part of a single or multiple conventional radio transmitter 24 implementation, in other words these units are not part of a SDR. Since Units 25.1 to 25.8 are part of single or multiple SDR transmitters, and Units 25.9 to 25.11 of a conventional 26 Radio Transmitter (Tx), the combinations of SDR and conventional radio transmitters are designated as Hybrid Defined Radio (HDR) systems. One or multiple input signals are 28 connected to one or more SDR and or one or more conventional radio systems parts of the HDR. In the receiver section of the HDR on leads 25.12, 25.17 and 25.22 single or 30 multiple RF signals are received from single or multiple antennas. Units 25.13, 25.18 and 25.23 are single or multiple embodiments of Band Pass Filters (BPF), Units 25.14, 25.19 59 WO 2007/018566 PCT/US2005/035931 and 25.24 are single or multiple embodiments of Analog to Digital (A/D) Converters 2 (ADC), Units 25.16, 25.21 and 25.26 are single or multiple embodiments of signal interface processor elements which provide single or multiple output signals on output 4 leads 25.16, 25.21 and 25.26 respectively. Fig. 26 is an information monitoring processing and communication system. This 6 system in certain application may include a patient monitor system. This information processing and transmission of diagnostics signals, other signals including DNA, 8 fingerprint information and or photo or video clips for single and or multiple systems is implemented in this figure. Signal sources include single or multiple sources including 10 one or more of sensors, probes or resultant signals from medical procedures or other procedure provided signals to one or more interface Units 26.1 to 26.6. The signal 12 sources could contain one or more devices which provide signals from medical devices, sensors, probes or equipment, from diagnostics and or measurement of blood pressure, or 14 other blood diagnostics, skin diagnostics , diagnostics of internal medicine information, body temperature, ECG, Electro Cardiogram or other sensors, information signals 16 obtained during surgery or post surgery, arterial blood, gas or heart pacemaker, glucose, MRI, fingerprint, other medical or diagnostics information signals, e.g. DNA or other 18 sources, such as photo or video or sound signals or a combination of the signal sources. The signals and/or signal sources could also include: blood pressure or other blood 20 diagnostics containing signals ,urine, stool, skin signals ECG, glucose body temperature arterial blood gas sensor provided signals, signals containing DNA, fingerprint or photo 22 or video signals and or video clip signals. During surgery and or post surgery sensors, probes and other medical devices are attached and or connected or inserted in parts of the 24 body of a patient and these devices, in certain implementations are integrated into one product. The said product could includes one or more or all the elements shown in Fig. 26 26 and such integrated product enables providing medical information containing signals by wireless means, instead the use of prior art cables and or other physical cumbersome 28 devices. Units 26.7 to 26.11 are amplifier or signal processor or signal transformer devices or transducers , e.g. acoustical to electrical or pressure to electrical or chemical 30 content to electrical signal transformers (transducers) and or merely interface points between the 26.1 to 26.6 signal sources and Unit 26.13. Unit 26.13 contains single or 60 WO 2007/018566 PCT/US2005/035931 multiple processors and or single or multiple signal modulators for modulation and 2 connection of one or more modulated signals to the single or multiple signal transmitters, Unit 26.14. Single or multiple signal transmitters 26.14 provide signals to one or more 4 transmit interface output elements 26.15 and or 26.16. On reverse signal path 26.17 control and information signals are provided to various units of Fig.26. The purpose of 6 this reverse path control signals is to enable changing some of the processing means of signal parameters, signal transmission formats and methods and in certain medically 8 authorized cases to change the medical treatment, e.g. quantity or speed of oxygen flow or of pain relievers, medication or other. The reverse control signal path may include a 10 push to talk (PTT) option and in certain cases includes other sets of signals, e.g. an emergency physician's orders regarding patient's treatment in a mobile emergency 12 vehicle, or orders for patient care at a remote facility. Fig. 27 is a Universal System including one or multiple Remote Control or Universal 14 Remote Control(URC) devices, including wireless door opener and or ignition starter, or window opener of an automobile or motor cycle or of other mobile devices, garage door 16 or home door opener and or locking control, control of home or office appliances, turn off or turn on of computers or other wired or wireless devices , alarm systems and of 18 other systems including monitoring devices and or directivity and or recording parameters of monitoring devices. Optional connection and or communication or control 20 between devices, shown in Fig.27 and Units shown in Fig.16, and or other figures, e.g. medical devices shown in Fig. 26 is provided by wired or wireless connections 27.9. 22 Unit 27.1 is an interface device and or a processor device and or sensor and or signal generator device and or a communication device for single or multiple signal 24 transmission to and reception from single or multiple antennas 27.2. Unit 27.3 is a cellular phone (cellphone) and or other wireless or mobile or portable device containing 26 signal interface units, processors, transmitters, receivers and connections to transmit and receive antennas (not shown in the figure) and providing /receiving signals on leads, 27.4 28 containing audio and or television, radio or CD player and or video screen information ,provided by Unit 27.5. Wired and or wireless connections 27.6 and 27.7 provide 30 additional communication, processing and control means between units 27.3 and 27.5 and Unit 27.8. Unit 27.8 contains a Bluetooth or other wireless device. Unit 27.3 is equipped 61 WO 2007/018566 PCT/US2005/035931 to provide signal repeater operations. The term signal repeater means that the repeater 2 device processes and or amplifies the signal, received from an other transmitter; following reception of the transmitted signal, the signal is provided for processing and 4 amplification for subsequent transmission. Fig. 28 is a test and measurement instrumentation system within a wireless multi-mode 6 system. Single or plurality of antennas 28.1, 28.4, 28.6 and 28.8 receive /transmit signals from/to single or multiple transceivers 28.2, 28.5, 28.7 and 28.9 respectively. These 8 transceivers are in certain cases parts of base station units and or of mobile units. Wired and or wireless connections 28.10 provide control and communications signals between 10 one or more or all units shown in Fig.28. Test signals are generated in Unit 28.9. These test signals are for performance measurement, testing and verification of one or multiple 12 system performance parameters and or system specifications. In certain cases entire Unit 28.9 or parts of Unit 28.9 are implemented within Unit 28.2 and or 28.5 or 28.7. 14 Fig. 29 is an implementation of single or multiple cellular phones, or of other mobile devices, communicating with single or multiple Base Station Transceiver (BST) having 16 single or plurality of antennas. The BST are collocated in some of the implementations, while in others they are at different locations. Single or multiple antennas 29.1 and or 18 29.4 transmit and or receive signals to/from single or multiple BST 29.2 and 29.5. Unit 29.8 contains one or more cellular phones and or other wireless or other communication 20 devices. Single or multiple antennas 29.7 receive and or transmit and connect signals to or from Unit 29.8, also designated here as the mobile unit. In one of the implementations 22 BST 29.2 and or BST 29.5 contain one or more transmitters-receivers(T/R or transceivers) for WCDMA signals and or CDMA signals and or transceivers for GSM or 24 GPRS and or EDGE signals and or OFDM signals or other spread spectrum signals. Unit 29.8 contains one or more transceivers. In some implementations mobile Unit 29.8 and or 26 any of the BST units are connected in a repeater mode. The repeater mode is used to enhance signal coverage area by amplifying and retransmitting the received signal. 28 Fig. 30 shows a cardiac stimulation device, a heart and a block diagram of a single chamber and or a dual-chamber pacemaker with a single or multiple wireless 30 communications and control systems of the present invention. Exemplary prior art single-chamber pacemaker and/or dual-chamber pacemaker and implantable cardiac 62 WO 2007/018566 PCT/US2005/035931 stimulation devices are described in U.S. Pat. 6,539,253 Thompson et al.: "Implantable 2 medical device incorporating integrated circuit notch filters", issued March 25, 2003 (for short "Thompson patent" or the" '253 patent" or "Thompson's '253 patent) and in U.S. 4 pat. 6,907,291 issued Jun.14, 2005, Snell et al.: "Secure telemetry system and method for an implantable cardiac stimulation device", assigned to Pacesetter, Inc., Sylmar, CA (for 6 short "Snell patent" or the " '291 patent" or "Snell's '291 patent"). The pacemaker and implantable cardiac stimulation device, of the current invention, is coupled to a heart 30.1 8 by way of leads 30.4a and 30.4b, lead 30.4a having an electrode 30.2 that is in contact with one of the atria of the heart, and lead 30.4b having an electrode 30.3 that is in 10 contact with one of the ventricles of the heart. Leads 30.4a and 30.4b are connected to the pacemaker through a connection interface and or processor unit 30.5 that forms part 12 of the pacemaker and implantable cardiac stimulation device. In certain other implementations and/or other applications, unit 30.1 contains other body parts or other 14 body organs than the heart, for example unit 30.1 may be the kidney, limb, head, skin or a vessel while Unit 30.2 and Unit 30.3 a device or a medical probe or an other device than 16 an electrode. Unit 30.6 contains single or multiple leads for connection of single or multiple signals between Unit 30.5 and 30.7. In certain embodiments unit 30.5 represents 18 an interface connector or connection, and or some signal processing between leads 30.4a and 30.4b and Unit 30.7, while in other embodiments unit 30.5 contains a 20 microprocessor for detection of signals received from Unit 30.7, for generation of control signals for the operation and/or modification of the parameters of the cardiac stimulation 22 device-heart pacemaker, pulse generator, amplifiers , processors , memory ,sensors, battery and other components for the operation, control and modification of operating 24 conditions of the pacemaker and or of other medical parameters. In some implementations Unit 30.5 contains stimulating pulse generators for atrial pulse 26 generation and ventricular pulse generation, one or more detection circuits and amplifiers. One of the amplifiers, contained in Unit 30.5 is typically configured to detect 28 an evoked response from the heart 30.1 in response to an applied stimulus, thereby aiding in the detection of "capture." Capture occurs when an electrical stimulus applied to the 30 heart is of sufficient energy to depolarize the cardiac tissue, thereby causing the heart muscle to contract, or in other words, causing the heart to beat. Capture does not occur 63 WO 2007/018566 PCT/US2005/035931 when an electrical stimulus applied to the heart is of insufficient energy to depolarize the 2 cardiac tissue. Unit 30.5 of the current invention may contain a protection circuit for protecting the pacemaker from excessive shocks or voltages that could appear on the 4 electrodes 30.2 and/or 30.3 in the event such electrodes were to come in contact with a high voltage signal, for example, from a defibrillation shock. 6 Unit 30.7 comprises one or more transmitters or receivers and/or transmitters and receivers, also known as transceivers (T/R), for transmission and or reception of one or 8 multiple signals connected by leads 30.8 and or 30.11 to Unit 30.10 and or Unit 30.12. The single or multiple transceivers of Unit 30.7 contain in certain embodiments one or 10 multiple modulation format selectable (MFS) and or/ code selectable embodiments, such as previously described, e.g. GSM, WCDMA, spread spectrum, Bluetooth, Wi-Fi EDGE 12 or other system specified modulation formats. In certain embodiments of Unit 30.7 there is at least one notch filter, also known as band stop filter, having an input and output that 14 blocks predetermined Electromagnetic Interference (EMI) signals .Unit 30.10 contains interface circuitry and or connection circuitry-leads to one or multiple antennas 30.9. Unit 16 30.12 is an interface connection for transmission and or reception of signals. In prior art pacemakers, e.g. Snell's '291 patent the pacemaker further includes 18 magnet detection circuitry. It is the purpose of the magnet detection circuitry to detect when a magnet is placed over the pacemaker, which magnet may be used by a physician 20 or other medical personnel to perform various reset functions of the pacemaker. The prior art pacemaker control requires magnet detection circuit for magnet controlled 22 pacemaker parameters. Unfortunately this magnet dependent operation /change of parameters of pacemakers is in many cases causing difficulties and or even rendering 24 impossible to have Magnetic Resonance Imaging (MRI), and/or Magnetic Resonance Image scanning on a patient who has a pace maker. Since MRI is a frequently desired 26 diagnostic procedure for diagnostic purposes, even in an emergency where the information from the MRI scan could be life saving, and since MRI interferes with the 28 correct operation of currently available magnetic detection-magnetic controlled based pacemakers, it would be highly desirable to develop a new generation of pacemakers 30 which could be operated and controlled without substantial magnetic materials, i.e. without the need of magnet based detection and magnet control. 64 WO 2007/018566 PCT/US2005/035931 In distinction with the prior art magnet detection circuit and physician or other medical 2 personnel performed various reset functions of the pacemaker, by placing a magnet over the pacemaker, in the current invention there is no need for magnet detection circuits and 4 no need for magnet's to be placed over the pacemaker to reset or modify parameters and functions/operation of the pacemaker. In the current invention magnetic detection and 6 magnet control of pacemaker is replaced by wireless signal detection and based on the detected wireless signals and processing of said wireless detected signals (received from 8 a physician operated wireless transmitter) control signals are generated to control the parameters and operation of the pacemaker. 10 In distinction with the prior art and with Snell's '291 patent, the current invention provides new structures and embodiments of multiuse and/or multimode wired and or 12 wireless transmitters and receivers, without need of magnetic coupling for adjusting or resetting the parameters of cardiac stimulation e.g. heart pacemaker devices and or other 14 medical devices. An advantage of the presented embodiments is that the stimulation devices can continue to operate even in emergency rooms or other environments where 16 the patient is having Magnetic Resonant Imaging (MRI) diagnostic tests. 18 Additional Description Having now described numerous embodiments of the inventive structure and method 20 in connection with particular figures or groups of figures, and having set forth some of the advantages provided by the inventive structure and method, we now highlight some 22 specific embodiments having particular combinations of features. It should be noted that the embodiments described heretofore, as well as those highlighted below include 24 optional elements or features that are not essential to the operation of the invention. 1. A first embodiment (1) is a location finder and communication system comprising: 26 two or more antennas or receive ports for receiving location determining signals from two or more location determining transmitters; two or more receivers for processing of 28 said location determining signal; a selector or combiner device for selection or combining of one or more of the received location determining signals; two or more 30 communication transmitters; connection circuitry for connecting the selected or the combined processed location determining signal to one or more communication 65 WO 2007/018566 PCT/US2005/035931 transmitters; a control and selection device for selection and connection of said location 2 determining signals to one or more of said communication transmitters. 2. A second embodiment (2) provides a location finder and modulation-demodulation 4 (modem) format selectable (MFS) and bit rate agile (BRA) communication system comprising: one or more receive ports for receiving location determining signals from 6 one or more location determining transmitters; one or more receivers and demodulators for reception and demodulation of said location determining signals to baseband signals; 8 a selector for selection of one or more of the baseband signals; connection circuitry for connecting the selected baseband signal to one or a plurality of transmitters; two or more 10 communication transmitters; a baseband signal interface circuit for interfacing and receiving the selected baseband signal; a cross-correlator circuit for processing the 12 baseband signal provided by said baseband interface circuit and for generation of cross correlated baseband signals; a shaped Time Constrained Signal (TCS) wavelet processor 14 and bit rate agile Long Response (LR) filter for providing shaped and filtered signals in in-phase and quadrature-phase baseband channels; a modulation-demodulation (modem) 16 format selectable or code selectable baseband structure for providing either modem format selectable or code selectable cross-correlated processed and filtered in-phase and 18 quadrature-phase baseband signals; a modulator for quadrature modulation of the in phase and quadrature-phase baseband signals; one or more amplifiers comprising linear 20 and/or nonlinear circuits for linear and/or non-linear amplification (NLA) of the modulated output signal of said quadrature modulator; and a switch or level controller for 22 selecting linearly or non-linearly amplified (NLA) modulated signals. 3. A third embodiment (3) provides a location finding and communication system 24 comprising: two or more receive ports for receiving either location finding signals and or other than location finding signals from either one or more location determining 26 transmitters or from one or more other than location finding signal transmitters; one or more receivers and demodulators for receiving and demodulating said location finding 28 signals to baseband signals; one or more receivers and demodulators for receiving and demodulating said other than location finding signals to baseband signals; a selector or 30 combiner device for selection or combining of one or multiple baseband signals; two or more signal modulators; connection circuitry for connecting the selected or the combined 66 WO 2007/018566 PCT/US2005/035931 single or multiple baseband signals to one or more of said signal modulators; a signal 2 processing network for receiving the baseband signals from the connection circuitry and for providing cross-correlated in-phase and quadrature-phase baseband signals at a first 4 specified bit rate; a signal processing network for receiving the selected or combined baseband signal and for providing a filtered signal at a second specified bit rate; and a 6 selector for selecting either the cross-correlated signals, the filtered signal, or both the cross-correlated signals and the filtered signal; and connection for providing the selected 8 signals to one or more modulators for signal modulation. 4. A fourth (4) implementation is a radio frequency identification (RFID) locator and 10 communicator system comprising: one or more than one antennas for receiving Radio Frequency (RF) signals from one or more RFID and or location determining and or 12 communication transmitters; one or more receivers and demodulators for reception and demodulation of said signals to baseband signals; a baseband signal processing network 14 for receiving and processing said baseband signals; a cross-correlator circuit for cross correlating said processed baseband signals and for generation of cross-correlated 16 baseband signals; a shaped Time Constrained Signal (TCS) wavelet processor and bit rate agile Long Response (LR) filter structure for providing shaped and bit rate agile filtered 18 signals in in-phase and quadrature-phase baseband channels; and a modulator for quadrature modulation of the in-phase and quadrature-phase baseband signals. 20 5. A fifth embodiment (5) is a Radio Frequency Identification (RFID) and communication system comprising a receiver for reception and demodulation of RFID 22 transmitted signals to baseband signals; a cross-correlator for processing of said baseband signals for generation of cross-correlated in-phase and quadrature-phase baseband 24 signals; and a modulator for quadrature modulation of the in-phase and quadrature-phase baseband signals. 26 6. A sixth embodiment (6) is a Radio Frequency Identification (RFID) and communication system, the improvement comprising: one or more receivers and one or 28 more demodulators for reception and demodulation of RFID transmitted signals to baseband signals and for providing said b'aseband signals to a spread spectrum baseband 30 processor and subsequent quadrature modulator for quadrature modulation of baseband spread spectrum signals and to a baseband filter and subsequent modulator for 67 WO 2007/018566 PCT/US2005/035931 modulation of the said baseband filtered signal; and a connection circuit for providing 2 either the spread spectrum modulated signal or the filtered modulated signal or both the modulated spread spectrum signal and the filtered modulated signals to one or more than 4 one transmitters for transmission of the spread spectrum modulated and or the filtered modulated signals. 6 7. A seventh embodiment (7) is a location finder and Radio Frequency Identification (RFID) signal demodulation and modulation system comprising: one or more antennas 8 for receiving modulated Radio Frequency (RF) location finder and or Radio Frequency Identification (RFID) signals from one or more than one location finder and or RFID 10 transmitters; one or more receivers and demodulators for reception and demodulation of either said modulated RF or RFID signals to baseband signals; a signal processing 12 network for receiving said baseband signals and for providing cross-correlated in-phase and quadrature-phase baseband signals at a first specified bit rate; a signal processing 14 network for receiving said baseband signals and for providing a filtered signal at a second specified bit rate; a selector for selecting either the cross-correlated signals or the filtered 16 signal or both the cross-correlated signals and the filtered signal; and a connection circuit for providing the selected signals to one or more modulators for signal modulation. 18 8. An eighth embodiment (8) comprises a location finder and communication system having two or more antennas for receiving modulated Radio Frequency (RF) location 20 finder signals and communication signals from three or more location finder and communication system transmitters; two or more receivers and demodulators for 22 reception and demodulation of said modulated RF signals to baseband signals; a signal processing network for receiving said baseband signals and for providing cross-correlated 24 in-phase and quadrature-phase baseband signals at a first specified bit rate; a signal processing network for receiving said baseband signals and for providing a filtered signal 26 at a second specified bit rate; a selector for selecting either the cross-correlated signals or the filtered signal or both the cross-correlated signals and the filtered signal; a 28 connection circuit for providing the selected signals to one or more than one modulators for signal modulation; and a connection circuit for providing the modulated signals to 30 two or more than two amplifiers and two or more than two antennas for amplification and transmission of the amplified modulated signals. 68 WO 2007/018566 PCT/US2005/035931 9. A ninth embodiment (9) provides a location finder and communication system 2 comprising: one or more receive ports for receiving modulated location finder signals from one or more location finder and communication system transmitters; one or more 4 receivers and demodulators for reception and demodulation of said modulated signals to baseband signals; a signal processing network for receiving said baseband signals and 6 for providing cross-correlated in-phase and quadrature-phase baseband signals at a first specified bit rate; a first quadrature modulator for quadrature modulating the cross 8 correlated signal; a filter for filtering a second bit rate signal, said second bit rate signal having a different bit rate than the first bit rate signal, and providing a filtered baseband 10 signal; a second modulator for modulating the filtered baseband signal; and switch circuitry for selecting and connecting either the cross-correlated first bit rate modulated 12 signal or the filtered second bit rate modulated signal to a transmitter. 10. A tenth embodiment (10) is a barcode reader, location finder and communication 14 system comprising: a barcode reader for reading bar-coded information and processing said bar-coded information into electrical signals; one or more receive ports for receiving 16 modulated location finder signals from one or more location finder and communication system transmitters; one or more receivers and demodulators for reception and 18 demodulation of said modulated signals to baseband signals; a signal processing network for receiving and processing said baseband signals and said bar-coded electrical signals 20 and for providing in-phase and quadrature-phase baseband signals; a filter for filtering said baseband signals and said bar-coded electrical signals and for providing filtered 22 baseband signals and said bar-coded electrical signals; a first quadrature modulator for quadrature modulating the in-phase and quadrature-phase baseband signals; a second 24 modulator for modulating the said filtered baseband and said bar-coded electrical signals; and switch circuitry for selecting and connecting either the quadrature modulated 26 or the filtered modulated signal to a transmitter. 11. An eleventh embodiment (11) is a stimulation device and communication system 28 comprising: leads for carrying stimulation pulses to and or from one or more electrodes; a pulse generator configured to generate stimulation pulses and for providing said pulses by 30 said leads to the electrodes; an interface circuit and/or processor for connection of said stimulation pulses to and/or from one or more wireless transmitter-receiver (T/R) circuits 69 WO 2007/018566 PCT/US2005/035931 for transmission and/or reception ot one or more wireless signals; and a control circuit 2 coupled to one or more of said wireless transmitter-receiver circuits, said control circuit comprising a control signal generator for generating control signals for controlling 4 operation parameters of the implantable cardiac stimulation device . 12. A twelfth embodiment (12) provides a cardiac stimulation and communication 6 system comprising: a pulse generator and processor for processing the stimulation pulses to and/or from one or more electrodes, said electrodes located in a heart; a signal 8 processing network for receiving said stimulation pulses and for providing cross correlated in-phase and quadrature-phase baseband signals; a signal processing network 10 for receiving said stimulation pulses and for providing a filtered baseband signal; and a selector for selecting either the cross-correlated signals or the filtered signal or both the 12 cross-correlated signals and the filtered signal; and providing the selected signals to one or more modulators for signal modulation. 14 13. A thirteenth embodiment (13) provides an implantable cardiac stimulation and modulation system comprising: a processor for processing stimulation pulses to and/or 16 from one or more electrodes; a signal processing network for receiving said stimulation pulses and for providing in-phase and quadrature-phase baseband signals; a signal 18 processing network for receiving said stimulation pulses and for providing a filtered baseband signal; and a selector for selecting either the in-phase and quadrature-phase 20 baseband signals or the filtered signal or both the in-phase and quadrature-phase baseband signals and the filtered signal; and providing the selected signals to one or more 22 modulators for signal modulation. 14. A fourteenth embodiment (14) provides a medical diagnostic and communication 24 system comprising: a processor for processing signals received from one or more medical diagnostic devices; a first signal processing network for receiving said processed signals 26 and for providing in-phase and quadrature-phase baseband signals; a second signal processing network for receiving said processed signals and for providing a filtered 28 baseband signal; and a selector for selecting either the in-phase and quadrature-phase baseband signals or the filtered baseband signal or both the in-phase and quadrature 30 phase baseband signals and the filtered signal; and providing the selected signals to one or more modulators for signal modulation. 70 WO 2007/018566 PCT/US2005/035931 15. A fifteenth embodiment (15) is a medical diagnostic and communication system 2 comprising: a processor for processing signals received from one or more medical diagnostic devices; a first signal processing network for receiving said processed signals 4 and for providing baseband signals having a first specified bit rate; a second signal processing network for receiving said processed signals and for providing baseband 6 signals having a second specified bit rate; and a selector for selecting either the first specified bit rate signal or the second specified bit rate signal or both the first specified 8 bit rate signal and the second specified bit rate signal; and providing the selected signals to one or more modulators for signal modulation. 10 16. A sixteenth embodiment (16) is a medical and diagnostic communication system, the improvement comprising: a transmitter of signals generated by a medical device; a 12 receiver for reception and processing of said medical device generated signals to baseband signals; circuitry for processing said baseband signals for generation of in 14 phase and quadrature-phase spread spectrum baseband signals; and a modulator for quadrature modulation of the in-phase and quadrature-phase baseband spread spectrum 16 signals. 17. A seventeenth embodiment (17) is a stimulation device and communication system 18 comprising: leads for carrying stimulating pulses to and or from one or more electrodes; a pulse generator configured to generate stimulation pulses and for providing said pulses 20 by said leads to the electrodes; an interface circuit and/or processor for connection of said stimulating pulses to and/or from one ore more spread spectrum transmitter-receiver 22 (T/R) circuits for transmission and/or reception of one or more spread spectrum signals; a control circuit coupled to one or more of said spread spectrum transmitter-receiver 24 circuits and the said pulse generator and further arranged to process and detect one or more received signals; and said control circuit having a control signal generator for 26 controlling the operation parameters of the stimulation device. 18. An eighteenth embodiment (18) provides a multiple modulator system comprising: 28 a fingerprint sensor, detection, identification and processing device for processing one or multiple fingerprint information to activate one or multiple modulators for signal 30 transmission; a location information receiver and processor for receiving and processing the location of the user; a processor device for processing and combining the location 71 WO 2007/018566 PCT/US2005/035931 information and fingerprint information activated signals with an additional user signal, 2 said user signal comprising a signal generated by a user and providing the processed signals to a first and or to a second modulator; a first modulator for spread spectrum 4 encoding and modulating the processed baseband signals; a second modulator for filtering and modulating the processed baseband signals; a connection circuit for 6 providing either the spread spectrum modulated signal or the filtered modulated signal or both the spread spectrum modulated signal and the filteredl modulated signal to one or 8 more transmitters for signal transmission. 19. A nineteenth embodiment (19) is a dual modulation transmitter apparatus 10 comprising: a fingerprint sensor, detection, identification and processing device for processing one or multiple fingerprints to activate a modulator for signal transmission; a 12 location information receiver and processor for receiving and processing the location of the user; a processor device for processing and combining the location information and 14 fingerprint activated signals with additional user signals and providing the processed, r baseband signals to a first and to a second modulator; a first modulator for spread 16 spectrum encoding and modulating the processed baseband signals; a second modulator for filtering and modulating the processed baseband signals; a connection circuit for 18 providing either the spread spectrum modulated signal or the filtered modulated signal or both the modulated spread spectrum signal and the modulated filtered signals to one or 20 more antennas for signal transmission. 20. A twentieth embodiment (20) provides a multiple purpose system comprising: 22 a fingerprint sensor, detection, identification and processing device for processing one or multiple fingerprints to activate one or multiple fingerprint generated signals for 24 modulation and for signal transmission; a location information receiver and processor for receiving and processing the location of the user; a processor device for processing 26 and combining the location information and fingerprint activated signals with additional user signals, said user signals comprising a signal generated by a user, and providing a 28 processed baseband signal to a first and to a second modulator; a first modulator for quadrature modulating the processed baseband signals; a second modulator for filtering 30 and modulating the processed baseband signals; a connection circuit for providing either the quadrature modulated signal or the filtered modulated signal or both the quadrature 72 WO 2007/018566 PCT/US2005/035931 modulated signal and the modulated filtered signals to one or more antennas for signal 2 transmission. 21. A twenty-first embodiment (21) is a multiple path transmitter system comprising: 4 a fingerprint sensor, detection, identification and processing device for processing one or multiple fingerprints to activate one or multiple modulators for signal transmission; a 6 location information receiver and processor for receiving and processing the location of the user; a processor device for processing and combining the location information and 8 fingerprint activated signals with additional user signals and providing the processed, baseband signals to a first and to a second modulator; a first modulator cross-correlating 10 and for quadrature modulating the processed baseband signals; a second modulator for filtering and modulating the processed baseband signals; a connection circuit for 12 providing either the quadrature modulated signal or the filtered modulated signal or both the quadrature modulated signal and the modulated filtered signals to one or more 14 antennas for signal transmission. 22. A twenty-second embodiment (22) provides a multiple modulator system 16 comprising: a fingerprint sensor, detection, identification and processing device for processing one or multiple fingerprint information to activate one or multiple modulators 18 for signal transmission; a location information receiver and processor for receiving and processing the location of the user; a processor device for processing and combining the 20 location information and fingerprint information activated signals with an additional user signal, said user signal comprising a signal generated by a user and providing the 22 processed signals to a first and to a second modulator; a first modulator cross-correlating and for quadrature modulating the processed signals; a second modulator for filtering and 24 modulating the processed signals; a connection circuit for providing either the quadrature modulated signal or the filtered modulated signal or both the quadrature modulated signal 26 and the modulated filtered signals to two or more transmitters for signal transmission. 23. A twenty-third embodiment (23) is a multi path communication apparatus 28 comprising: a user detection and authentication device for identifying a user, processing the detected authentication identification of the user, and generating authentication 30 information signals; a first signal path including a modulator coupled to said information signals and to an other user generated input signal, said input signal comprising a signal 73 WO 2007/018566 PCT/US2005/035931 generated by a user; a second signal path including a cross-correlator for generation of 2 in-phase (I) and quadrature-phase (Q) cross-correlated baseband signals from said information signals and or from said user generated signals, and a quadrature modulator 4 coupled to said cross-correlated baseband signals; a third signal path coupled to a transmitter; and a switch or combiner configured to couple the third signal path to the 6 first signal path under a first condition, to couple the third signal path to the second signal path under a second condition, or to couple the third signal path to both the first signal 8 path and the second signal path under a third condition. 24. A twenty-fourth embodiment (24) is system comprising: a user detection and 10 authentication device for identifying a user, processing the detected authentication identification of the user, and generating authentication information signals; a first signal 12 path including a modulator coupled to said information signals and to an other user generated input signal, said input signal comprising a signal generated by a user; a second 14 signal path including a quadrature modulator coupled to said information and or other user generated signal; and a switch or combiner configured to couple the first signal path 16 under a first condition, or the second signal path under a second condition, or the third signal path under a third condition to the transmitter for signal transmission. 18 The invention further provides methods and procedures performed by the structures, devices, apparatus, and systems described herein before, as well as other embodiments 20 incorporating combinations and subcombinations of the structures highlighted above and described herein. 22 All publications including patents, pending patents and reports listed or mentioned in these publications and/or in this patent/invention are herein incorporated by reference to 24 the same extent as if each publication or report, or patent or pending patent and/or references listed in these publications, reports, patents or pending patents were 26 specifically and individually indicated to be incorporated by reference. The invention now being fully described, it will be apparent to one of ordinary skill in the art that many 28 changes and modifications can be made thereto without departing from the spirit or scope of the appended claims. 30 74

Claims (11)

1. A position finder and communication system including: 4 a first processor for receiving and processing multiple signals received from multiple locations and for generating from said received signals a processed position finder signal; 6 a second processor, including a first cross-correlator and a transmit baseband filter, for generating cross-correlated in-phase and quadrature-phase processed filtered baseband 8 signals from an input signal; a third processor, including a spread spectrum processor and a second cross-correlator, 10 for generating cross-correlated in-phase and quadrature-phase processed spread spectrum signals; 12 a fourth processor including an orthogonal frequency division processor for generating a orthogonal frequency division processed signal; 14 a fifth processor for generating a signal from a processing of the processed position finder signal generated by the first processor, with one or more of the signals generated by 16 the second, third and fourth processors; a quadrature modulator for quadrature modulation of the signal generated by the fifth 18 processor; and a transmitter for transmission of the quadrature modulated signal. 20

2. The system of claim 1, further including a receiver and demodulator for receiving and 22 demodulating a modulated signal. 24

3. The system of claim 1, wherein said multiple signals received are received from two or more satellite transmitters and from two or more land based transmitters, wherein said 26 received signals from satellite transmitters are received in different radio frequency bands than said signals received from land based transmitters. 28

4. The system of claim 1, wherein said spread spectrum processor and second cross 30 correlator include a code division multiple access processor and filter for providing code division multiple access cross-correlated in-phase and quadrature-phase filtered signals 75 having a different modulation format and different bit rate than the modulation format and 2 the bit rate of said second processor generated cross-correlated in-phase and quadrature phase processed filtered baseband signals. 4

5. The system of claim 1, wherein said orthogonal frequency division processed signal is 6 an Orthogonal Frequency Division Multiplexed or Orthogonal Frequency Division Multiple Access processed voice or video signal. 8

6. The system of claim 1, wherein said transmitter for transmission of the quadrature 10 modulated signal includes a first amplifier operated in a first radio frequency (RF) band in a linearly amplified (LINA) mode and a second amplifier operated in a second radio frequency 12 (RF) band, wherein the second RF band is different from the first RF band and said second amplifier is operated in a non-linearly amplified (NLA) mode. 14

7. The system of claim 1, wherein said cross-correlated in-phase and quadrature-phase 16 processed filtered baseband signals and said cross-correlated in-phase and quadrature-phase processed spread spectrum signals are used in a cellular communication system and said 18 orthogonal frequency division processed signal is used in a wireless local area network, wherein said cellular communication system and said wireless local area network are distinct 20 communication systems and networks. 22

8. The system of claim 1, wherein said first cross-correlator generates cross-correlated in-phase and quadrature-phase processed baseband signals are such that when the in-phase 24 signal has its maximum amplitude, the quadrature-phase signal has zero value and when the in-phase signal has a local maximum the quadrature-phase signal has a local minimum. 26

9. The system of claim 1, wherein said orthogonal frequency division processor for 28 providing a orthogonal frequency division processed signal includes a wired multimode communication connector for receiving a processed video signal from a wire, cable, or fiber 30 optic communication connected internet system. 76

10. The system of claim 1, further including a receiver and demodulator for receiving 2 and demodulating a modulated signal, wherein said receiver and demodulator includes an antenna array of four or more antennas for receiving said modulated signal and a receive 4 baseband filter for receiving and filtering the demodulated signal and for providing cross correlated in-phase and quadrature-phase filtered baseband signals wherein said receive 6 baseband filter is mis-matched to said transmit baseband filter. 8

11. A system as claimed in any of the preceding claims, and substantially as herein described with reference to the accompanying drawings. 10 77